UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Pedder007]

@dutchman und alle anderen Beteiligten.

Danke für die klasse Anleitung!
Gerade 3 Slaves in Proxmox und danach den Master auf ne'm Raspi von node 16.9 nach 18.16 up-gedated.
Lief alles wie erwartet durch und somit bleiben die BackUps und der Clone in der Schublade ;-)

Danke :+1:

[Habedere]

@homoran
So ich habe jetzt das neueste Raspberry OS installiert und die Installation von ioBroker angestoßen...
Dies endete allerdings mit einer Fehlermeldung und nun sieht es so aus:

nulu@raspberrypi:/opt/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null
uname -m && type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
aarch64
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
/usr/bin/npx
v18.16.0
v18.16.0
9.5.1
9.5.1
node:internal/modules/cjs/loader:1078
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1075:15)
    at Module._load (node:internal/modules/cjs/loader:920:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.16.0

Hat jemand einen Tipp? nochmal neu probieren?

[Thomas Braun]

@habedere sagte in Troubleshooting NodeJS update:

die Installation von ioBroker angestoßen

Wie genau?

[Habedere]

@thomas-braun
Gem. deiner Anleitung Installation auf Raspi - Einfacher geht's nicht

Also wie folgt:

curl -sLf https://iobroker.net/install.sh | bash -

Ergebnis siehe Screenshots (habe leider keinen Code kopiert)

[Thomas Braun]

@habedere

Ich kann die Screenshots zwar nicht lesen, aber versuch Mal

cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller

[Habedere]

@thomas-braun
er bleibt erst wieder mal hier stehen

nulu@raspberrypi:/opt/iobroker $ cd /opt/iobroker
npm ls | grep -E 'github|ERR'
npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-04-23T11_39_17_688Z-debug-0.log
nulu@raspberrypi:/opt/iobroker $ cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not tran                                                                                                              sfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
(##################) ⠧ reify:iobroker.admin: http fetch GET 200 https://registry.npmjs.org/iobroker.admin/-/iobroker.admin-6.3.5.tgz 52083ms (cache miss)

Evtl. gehts danach aber weiter - war vorhin auch ähnlich.

[Thomas Braun]

@habedere

Und kommt der jetzt auf die Beine?

[Habedere]

@thomas-braun
Leider nein - hängt immer noch an der selben stelle :(
Also quasi noch schlechter wie vorher....

[Thomas Braun]

@habedere sagte in Troubleshooting NodeJS update:

hängt immer noch an der selben stelle

Heißt?

[Habedere]

@thomas-braun
Freeze

nulu@raspberrypi:/opt/iobroker $ cd /opt/iobroker
npm ls | grep -E 'github|ERR'
npm ERR! code ELSPROBLEMS
npm ERR! missing: iobroker.admin@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.backitup@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.discovery@stable, required by iobroker.inst@3.0.0
npm ERR! missing: iobroker.js-controller@stable, required by iobroker.inst@3.0.0

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-04-23T11_39_17_688Z-debug-0.log
nulu@raspberrypi:/opt/iobroker $ cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not tran                                                                                                              sfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
^C^C###############) ⠧ reify:iobroker.admin: http fetch GET 200 https://registry.npmjs.org/iobroker.admin/-/iobroker.admin-6.3.5.tgz 52083ms (cache miss)

[Thomas Braun]

@habedere sagte in Troubleshooting NodeJS update:

Freeze

Glaube ich nicht. Lass das mal laufen.

[Habedere]

@thomas-braun
Mach ich - steht halt schon seit ner guten 2 Stunden an der selben Stelle ;)

[Habedere]

@habedere
Also Shell hat sich nicht mehr bewegt und nach dem ich das Terminal geschlossen habe war eine erneute Anmeldung über SSH nicht möglich. Hab dann den Strom ziehen müssen - aber siehe da, es läuft :)

nulu@raspberrypi:~ $ /opt/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs &>                                                                                     /dev/null
uname -m && type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx                                                                                     -v && iob -v && whoami && groups && echo $XDG_SESSION_TYPE && pwd && sudo apt u                                                                                    pdate &> /dev/null && sudo apt update && apt policy nodejs
aarch64
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
/usr/bin/npx
v18.16.0
v18.16.0
9.5.1
9.5.1
4.0.24
nulu
nulu adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobr                                                           oker
tty
/home/nulu
OK:1 http://deb.debian.org/debian bullseye InRelease
OK:2 http://deb.debian.org/debian bullseye-updates InRelease
OK:3 http://security.debian.org/debian-security bullseye-security InRelease
OK:4 http://archive.raspberrypi.org/debian bullseye InRelease
OK:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Alle Pakete sind aktuell.
nodejs:
  Installiert:           18.16.0-deb-1nodesource1
  Installationskandidat: 18.16.0-deb-1nodesource1
  Versionstabelle:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Werde jetzt mal das Backup einspielen...

Vielen vielen Dank für die Hilfe!

[Homoran]

@habedere sagte in Troubleshooting NodeJS update:

Werde jetzt mal das Backup einspielen

nein!

[Homoran]

@habedere sagte in Troubleshooting NodeJS update:

Hab dann den Strom ziehen müssen - aber siehe da, es läuft

wirklich oder nur scheinbar?

bitte Ausgabe von iob diag in der Vollversion

[Habedere]

@habedere

Gestopt! Why?

[Homoran]

@habedere sagte in Troubleshooting NodeJS update:

@habedere

Gestopt! Why?

einmal s.o. und zum zweiten: hast du vis manuell installiert?

und gestoppt ist abgebrochen ist undefinierter Zustand?

[Habedere]

@homoran
sorry - mit gestopt meinte ich mich. Hab das Backup noch nicht gestartet weil ich gerade noch deine Nachricht gelesen habe. Hab nur die json des Backup-Adapter eingespielt damit die Zugangsdaten zum Server etc. wieder drin sind...

Full diag:

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 3 Model B Rev 1.2
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 19:51:34 up 14 min,  3 users,  load average: 0.91, 0.88, 0.56
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=54.2'C
volt=1.3000V

*** Time and Time Zones ***
               Local time: Sun 2023-04-23 19:51:34 CEST
           Universal time: Sun 2023-04-23 17:51:34 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
nulu
/home/nulu
nulu adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            909M        447M        105M        9.0M        356M        389M
Swap:            99M        3.0M         96M
Total:          1.0G        450M        201M

          909 M total memory
          447 M used memory
          491 M active memory
          192 M inactive memory
          105 M free memory
            2 M buffer memory
          354 M swap cache
           99 M total swap
            3 M used swap
           96 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G  4.3G  101G   5% /
devtmpfs       devtmpfs  325M     0  325M   0% /dev
tmpfs          tmpfs     455M     0  455M   0% /dev/shm
tmpfs          tmpfs     182M  1.2M  181M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs      91M   20K   91M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Apr 23 19:37:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=bdb8b6dd-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Apr 23 19:37:10 2023] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Sun Apr 23 19:37:10 2023] EXT4-fs (sda2): write access will be enabled during recovery
[Sun Apr 23 19:37:11 2023] EXT4-fs (sda2): recovery complete
[Sun Apr 23 19:37:11 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Apr 23 19:37:11 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sun Apr 23 19:37:14 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
628M    /var/
245M    /var/cache
239M    /var/cache/apt
184M    /var/lib
138M    /var/cache/apt/archives

Archived and active journals take up 96.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
18M     /opt/iobroker/iobroker-data/
15M     /opt/iobroker/iobroker-data/files
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.5M    /opt/iobroker/iobroker-data/objects.jsonl
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     "javascript" not found

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.admin@6.3.5 /opt/iobroker/node_modules/iobroker.admin
npm ERR! invalid: iobroker.backitup@2.6.16 /opt/iobroker/node_modules/iobroker.backitup
npm ERR! invalid: iobroker.discovery@3.1.0 /opt/iobroker/node_modules/iobroker.discovery
npm ERR! invalid: iobroker.js-controller@4.0.24 /opt/iobroker/node_modules/iobroker.js-controller

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/nulu/.npm/_logs/2023-04-23T17_52_10_992Z-debug-0.log
Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Controller "js-controller": 4.0.24   , installed 4.0.24

Objects and States
Please stand by - This may take a while
Objects:        142
States:         104

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          13265      586/cupsd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          747        610/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15706      591/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15697      591/iobroker.js-con
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          13264      586/cupsd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       21681      2506/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          749        610/sshd: /usr/sbin
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14638      429/avahi-daemon: r
udp        0      0 0.0.0.0:55672           0.0.0.0:*                           108        14640      429/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13255      525/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15364      629/cups-browsed
udp6       0      0 :::5353                 :::*                                108        14639      429/avahi-daemon: r
udp6       0      0 :::53577                :::*                                108        14641      429/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-23 19:47:34.054  - info: host.raspberrypi instance system.adapter.backitup.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-23 19:47:34.292  - info: host.raspberrypi instance system.adapter.discovery.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-23 19:47:36.168  - info: host.raspberrypi instance system.adapter.admin.0 started with pid 2506
2023-04-23 19:47:36.527  - info: host.raspberrypi instance system.adapter.backitup.0 started with pid 2513
2023-04-23 19:47:36.801  - info: host.raspberrypi instance system.adapter.discovery.0 started with pid 2520
2023-04-23 19:47:41.401  - info: discovery.0 (2520) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-04-23 19:47:41.573  - info: admin.0 (2506) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-04-23 19:47:41.828  - info: discovery.0 (2520) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.16.0, js-controller: 4.0.24
2023-04-23 19:47:41.912  - info: backitup.0 (2513) starting. Version 2.6.16 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.16.0, js-controller: 4.0.24
2023-04-23 19:47:42.042  - info: admin.0 (2506) starting. Version 6.3.5 in /opt/iobroker/node_modules/iobroker.admin, node: v18.16.0, js-controller: 4.0.24
2023-04-23 19:47:42.169  - info: admin.0 (2506) requesting all states
2023-04-23 19:47:42.221  - info: backitup.0 (2513) [iobroker] backup was activated at 02:00 every 90 day(s)
2023-04-23 19:47:42.171  - info: admin.0 (2506) requesting all objects
2023-04-23 19:47:44.040  - info: admin.0 (2506) received all objects
2023-04-23 19:47:44.833  - info: admin.0 (2506) http server listening on port 8081
2023-04-23 19:47:44.837  - info: admin.0 (2506) Use link "http://localhost:8081" to configure.
2023-04-23 19:47:44.866  - info: admin.0 (2506) socket.io server listening on port 8081
2023-04-23 19:47:45.104  - error: backitup.0 (2513) Error: Command failed: sudo mount -t cifs -o username=ioBroker,password=****,rw,uid=iobroker,gid=iobroker,file_mode=0777,dir_mode=0777 //192.168.178.5/Daten1/ioBrokerBackup/MainRaspiWohnz /opt/iobroker/backups
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg)

2023-04-23 19:47:46.111  - info: admin.0 (2506) ==> Connected system.user.admin from ::ffff:192.168.178.10
2023-04-23 19:47:46.661  - info: admin.0 (2506) <== Disconnect system.user.admin from ::ffff:192.168.178.10 admin
2023-04-23 19:47:47.674  - info: admin.0 (2506) ==> Connected system.user.admin from ::ffff:192.168.178.10
2023-04-23 19:48:00.026  - info: admin.0 (2506) ==> Connected system.user.admin from ::ffff:192.168.178.10

============ Mark until here for C&P =============

Ein paar Error scheinen schon noch drin zu sein...
Hab nie VIS genutzt geschweige denn installiert.

[Thomas Braun]

@habedere sagte in Troubleshooting NodeJS update:

Hab nie VIS genutzt geschweige denn installiert.

Dann schalte den Desktop an der Kiste aus.

[Homoran]

@habedere sagte in Troubleshooting NodeJS update:

X-Server: true

warum schleppst du mit den mickrigen 1GB RAM noch einen kompletten Desktop mit?

und die ELSPROBLEMS gefallen mir auch nicht.