Meldung beim Starten vom Raspi

Dr.Pie

Moin
lange war Ruhe...

Nun aber kommt immer diese Meldung wenn ich das Intro starte.

Laut Beschreibung sind da wohl zu viele Adapter bzw zu viele Prozesse am laufen.

Wie bekomme ich denn raus welche Prozesse vielleicht zu viel sind ?

Hier mal ein Screenshot vom System:

Welche Infos benötigt ihr noch ??

Danke

Thomas Braun

@dr-pie sagte in Meldung beim Starten vom Raspi:

Wie bekomme ich denn raus welche Prozesse vielleicht zu viel sind ?

Welche laufen denn? 2GB RAM ist halt nicht üppig.

Schau mit

iob diag

mal rein.

Homoran

@dr-pie sagte in Meldung beim Starten vom Raspi:

Welche Infos benötigt ihr noch ??

nahezu alles!

fangen wir mal an mit iobroker list instances und top

komplette Ein- und Ausgaben aber als Text in code-tags posten, keine Screenshots!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

Dr.Pie

@thomas-braun sagte in Meldung beim Starten vom Raspi:

@dr-pie sagte in Meldung beim Starten vom Raspi:

Wie bekomme ich denn raus welche Prozesse vielleicht zu viel sind ?

Welche laufen denn? 2GB RAM ist halt nicht üppig.

Schau mit
iob diag 
mal rein.

pi@raspberrypi:~ $ iob diag
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>]                    Starts the js-controller or a specified adapter instance
  iobroker stop [<adapter>.<instance>]                         stops the js-controller or a specified adapter instance
  iobroker restart [<adapter>.<instance>]                      Restarts js-controller or a specified adapter instance  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
pi@raspberrypi:~ $

@homoran sagte in Meldung beim Starten vom Raspi:

@dr-pie sagte in Meldung beim Starten vom Raspi:

Welche Infos benötigt ihr noch ??

nahezu alles!

fangen wir mal an mit iobroker list instances und top

komplette Ein- und Ausgaben aber als Text in code-tags posten, keine Screenshots!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

pi@raspberrypi:~ $ iobroker list instances
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
+ system.adapter.harmony.0                : harmony               : raspberrypi                              -  enabled
+ system.adapter.heos.0                   : heos                  : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.2                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.4                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : raspberrypi                              -  enabled
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5003
+ system.adapter.synology.1               : synology              : raspberrypi                              -  enabled, port: 5002
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.tr-064.1                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-lcars.0              : vis-lcars             : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              -  enabled
+ system.adapter.wled.0                   : wled                  : raspberrypi                              -  enabled
  system.adapter.yamaha.0                 : yamaha                : raspberrypi                              - disabled

+ instance is alive

pi@raspberrypi:~ $ iobroker top
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>]                    Starts the js-controller or a specified adapter instance
  iobroker stop [<adapter>.<instance>]                         stops the js-controller or a specified adapter instance
  iobroker restart [<adapter>.<instance>]                      Restarts js-controller or a specified adapter instance  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]

Ich hoffe das ich das so alles richtig gemacht habe ...

Thomas Braun

@dr-pie

iob stop 
iob fix
iob start
iob diag

Dr.Pie

@thomas-braun ok ... ich habe das ausgeführt.
Dann musste ich 2x Press any Key machen.

Das letzte was dann kam war:

Copy text starting here:

======================= SUMMARY =======================
v.2023-01-02

Operatingsystem: Raspbian GNU/Linux 11 (bullseye)
Installation: Native
Timezone: Europe/Berlin
User-ID: 1000
X-Server: false
Boot Target: multi-user.target

Pending OS-Updates: 40

Nodejs-Installation: /usr/bin/nodejs v16.18.1
/usr/bin/node v16.18.1
/usr/bin/npm 8.19.2
/usr/bin/npx 8.19.2

ioBroker Core: js-controller 4.0.24
admin 6.3.5

ioBroker Status: iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Status admin:

system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin

Pending iob updates: 1

Active repo(s): stable

Objects: 14798
States: 12103

Size of iob-Database:

17M /opt/iobroker/iobroker-data/objects.jsonl
8.8M /opt/iobroker/iobroker-data/objects.json.migrated
8.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated
0 /opt/iobroker/iobroker-data/objects.json.old
0 /opt/iobroker/iobroker-data/objects.json.broken
4.2M /opt/iobroker/iobroker-data/states.jsonl
1.9M /opt/iobroker/iobroker-data/states.json.migrated
1.9M /opt/iobroker/iobroker-data/states.json.bak.migrated
4.0K /opt/iobroker/iobroker-data/states.json.broken
0 /opt/iobroker/iobroker-data/states.json.old

=================== END OF SUMMARY ====================

pi@raspberrypi:~ $

Thomas Braun · ioBroker Core: js-controller 4.0.24 admin 6.3.5

@dr-pie sagte in Meldung beim Starten vom Raspi:

Pending OS-Updates: 40

Schieb die 40 Udates auf das System. Und dann die Langform des diag nochmal.

Dr.Pie

@thomas-braun Moin

======================= SUMMARY =======================
                     v.2023-01-02


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Installation:           Native
Timezone:               Europe/Berlin
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.0
                        /usr/bin/node           v16.19.0
                        /usr/bin/npm            8.19.3
                        /usr/bin/npx            8.19.3

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Pending iob updates:    1

Active repo(s): stable

Objects:                14798
States:                 12108

Size of iob-Database:

19M     /opt/iobroker/iobroker-data/objects.jsonl
8.8M    /opt/iobroker/iobroker-data/objects.json.migrated
8.8M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
0       /opt/iobroker/iobroker-data/objects.json.old
0       /opt/iobroker/iobroker-data/objects.json.broken
7.4M    /opt/iobroker/iobroker-data/states.jsonl
1.9M    /opt/iobroker/iobroker-data/states.json.migrated
1.9M    /opt/iobroker/iobroker-data/states.json.bak.migrated
4.0K    /opt/iobroker/iobroker-data/states.json.broken
0       /opt/iobroker/iobroker-data/states.json.old


=================== END OF SUMMARY ====================

Das ist sicher nicht die lange Form .. oder ?

crunchip

@dr-pie sagte in Meldung beim Starten vom Raspi:

discovery.0

diesen kannst du zumindest deaktivieren

Thomas Braun

@dr-pie sagte in Meldung beim Starten vom Raspi:

Das ist sicher nicht die lange Form .. oder ?

Nein, die Langfassung läuft davor über den Screen.

Codierknecht

@crunchip
Und von influx, shelly und tr-064 laufen mehrere Instanzen. Werden die wirklich benötigt?

crunchip

@codierknecht ja, je nach Anwendung

Dr.Pie

@thomas-braun

Skript v.2023-01-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture:   armv7l
Docker:         false
Virtualization: none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 09:31:11 up 20 min,  1 user,  load average: 1.19, 1.58, 1.57
CPU threads: 4

*** Time and Time Zones ***
Mon Jan 16 08:31:11 UTC 2023
Mon Jan 16 09:31:11 CET 2023
CET +0100
Europe/Berlin

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.8G        1.4G         99M        0.0K        347M        462M
Swap:            99M         76M         23M
Total:          1.9G        1.5G        123M

         1848 M total memory
         1401 M used memory
          335 M active memory
         1282 M inactive memory
           99 M free memory
           38 M buffer memory
          309 M swap cache
           99 M total swap
           76 M used swap
           23 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      118G   15G   99G  13% /
devtmpfs       devtmpfs  764M     0  764M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  948K  369M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   50M  203M  20% /boot
tmpfs          tmpfs     185M   16K  185M   1% /run/user/1000

Messages in dmesg:
[Mon Jan 16 09:11:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=DC:A6:32:D7:FB:72 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=174a5f11-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Mon Jan 16 09:11:05 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Mon Jan 16 09:11:05 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Mon Jan 16 09:11:08 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
6.5G    /var/
4.0G    /var/log
3.8G    /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c
3.8G    /var/log/journal
2.3G    /var/cache/apt

/opt/iobroker/backups:
445M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
714M    /opt/iobroker/iobroker-data/
303M    /opt/iobroker/iobroker-data/history
277M    /opt/iobroker/iobroker-data/files
89M     /opt/iobroker/iobroker-data/backup-objects
72M     /opt/iobroker/iobroker-data/files/telegram.admin

The five largest files in iobroker-data are:
19M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
9.1M    /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.19.0
/usr/bin/node           v16.19.0
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3

nodejs:
  Installed: 16.19.0-deb-1nodesource1
  Candidate: 16.19.0-deb-1nodesource1
  Version table:
 *** 16.19.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u1 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
+ system.adapter.harmony.0                : harmony               : raspberrypi                              -  enabled
+ system.adapter.heos.0                   : heos                  : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.2                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.4                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : raspberrypi                              -  enabled
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5003
+ system.adapter.synology.1               : synology              : raspberrypi                              -  enabled, port: 5002
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.tr-064.1                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-lcars.0              : vis-lcars             : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              -  enabled
+ system.adapter.wled.0                   : wled                  : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5003
+ system.adapter.synology.1               : synology              : raspberrypi                              -  enabled, port: 5002
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.5.10   , installed 2.5.10
Adapter    "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "fb-checkpresence": 1.1.20, installed 1.1.20
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "fritzdect"    : 2.2.6    , installed 2.2.6
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heos"         : 1.10.0   , installed 1.10.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "lgtv"         : 1.1.10   , installed 1.1.10
Adapter    "lgtv11"       : 1.0.5    , installed 1.0.5
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "mqtt-client"  : 1.6.3    , installed 1.6.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "plex"         : 0.9.1    , installed 0.9.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.0.0    , installed 5.3.2  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "tankerkoenig" : 3.1.0    , installed 3.1.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "tr-064"       : 4.2.17   , installed 4.2.17
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "vis"          : 1.4.15   , installed 1.4.15
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-lcars"    : 1.0.4    , installed 1.0.4
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "wled"         : 0.6.7    , installed 0.6.7
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yamaha"       : 0.5.3    , installed 0.5.3

Objects and States
Please stand by - This may take a while
Objects:        14798
States:         12071

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://repos.influxdata.com/debian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_16.x bullseye InRelease
Get:5 https://packages.grafana.com/oss/deb stable InRelease [5984 B]
Err:5 https://packages.grafana.com/oss/deb stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6
W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        14123      505/influxd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11040      551/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       24011      1560/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       23354      1560/iobroker.js-co
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       30759      1978/io.shelly.1
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14570      494/cupsd
tcp6       0      0 :::61991                :::*                    LISTEN      1001       29292      2060/io.harmony.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11042      551/sshd: /usr/sbin
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14569      494/cupsd
tcp6       0      0 :::3000                 :::*                    LISTEN      115        13012      498/grafana-server
tcp6       0      0 :::8086                 :::*                    LISTEN      999        14863      505/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       23427      1578/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       31704      2202/io.web.0
udp        0      0 0.0.0.0:58991           0.0.0.0:*                           1001       124746     12323/io.fullybrows
udp        0      0 0.0.0.0:46703           0.0.0.0:*                           1001       29450      2168/io.vis-inventw
udp        0      0 0.0.0.0:52849           0.0.0.0:*                           1001       29620      2202/io.web.0
udp        0      0 0.0.0.0:34419           0.0.0.0:*                           1001       23464      1605/io.history.0
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          12904      560/cups-browsed
udp        0      0 0.0.0.0:52350           0.0.0.0:*                           1001       30363      2120/io.upnp.0
udp        0      0 0.0.0.0:38534           0.0.0.0:*                           1001       32447      2217/io.wled.0
udp        0      0 0.0.0.0:33928           0.0.0.0:*                           108        12634      364/avahi-daemon: r
udp        0      0 0.0.0.0:46753           0.0.0.0:*                           1001       29185      2030/io.fb-checkpre
udp        0      0 0.0.0.0:34978           0.0.0.0:*                           1001       29086      1993/io.backitup.0
udp        0      0 0.0.0.0:34478           0.0.0.0:*                           1001       25281      1706/io.influxdb.1
udp        0      0 0.0.0.0:39600           0.0.0.0:*                           1001       33898      2247/io.heos.0
udp        0      0 0.0.0.0:54962           0.0.0.0:*                           1001       23349      1560/iobroker.js-co
udp        0      0 0.0.0.0:59063           0.0.0.0:*                           1001       29890      1967/io.shelly.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       29623      2217/io.wled.0
udp        0      0 192.168.178.23:5353     0.0.0.0:*                           1001       28980      1932/io.tr-064.1
udp        0      0 192.168.178.23:5353     0.0.0.0:*                           1001       27949      1909/io.tr-064.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12632      364/avahi-daemon: r
udp        0      0 0.0.0.0:47359           0.0.0.0:*                           1001       137152     13825/io.info.0
udp        0      0 0.0.0.0:44810           0.0.0.0:*                           1001       28913      1932/io.tr-064.1
udp        0      0 0.0.0.0:55053           0.0.0.0:*                           1001       27149      1770/io.ping.0
udp        0      0 0.0.0.0:35607           0.0.0.0:*                           1001       33889      2247/io.heos.0
udp        0      0 0.0.0.0:59178           0.0.0.0:*                           1001       34999      2315/io.net-tools.0
udp        0      0 0.0.0.0:58184           0.0.0.0:*                           1001       29290      2060/io.harmony.0
udp        0      0 0.0.0.0:36179           0.0.0.0:*                           1001       26521      1809/io.rpi2.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       34879      2120/io.upnp.0
udp        0      0 0.0.0.0:54207           0.0.0.0:*                           1001       25779      1616/io.javascript.
udp        0      0 0.0.0.0:36804           0.0.0.0:*                           1001       23536      1646/io.sql.0
udp        0      0 0.0.0.0:52678           0.0.0.0:*                           1001       27467      1909/io.tr-064.0
udp        0      0 0.0.0.0:53709           0.0.0.0:*                           1001       25818      1631/io.scenes.0
udp        0      0 0.0.0.0:33769           0.0.0.0:*                           1001       24173      1665/io.whatsapp-cm
udp        0      0 0.0.0.0:42480           0.0.0.0:*                           1001       24431      1695/io.telegram.0
udp        0      0 0.0.0.0:34299           0.0.0.0:*                           1001       34434      2349/io.lgtv.0
udp        0      0 0.0.0.0:56325           0.0.0.0:*                           1001       126376     1967/io.shelly.0
udp        0      0 0.0.0.0:35334           0.0.0.0:*                           1001       30359      2120/io.upnp.0
udp        0      0 0.0.0.0:41478           0.0.0.0:*                           1001       31335      2105/io.tankerkoeni
udp        0      0 0.0.0.0:36878           0.0.0.0:*                           1001       29734      1888/io.synology.1
udp        0      0 0.0.0.0:52756           0.0.0.0:*                           1001       25730      1578/io.admin.0
udp        0      0 0.0.0.0:32800           0.0.0.0:*                           1001       30725      1978/io.shelly.1
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       29293      2060/io.harmony.0
udp        0      0 0.0.0.0:33834           0.0.0.0:*                           1001       27321      1868/io.synology.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       27597      1967/io.shelly.0
udp        0      0 0.0.0.0:44099           0.0.0.0:*                           1001       24207      1680/io.influxdb.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          11135      457/dhcpcd
udp6       0      0 :::5353                 :::*                                108        12633      364/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          14680      457/dhcpcd
udp6       0      0 :::37950                :::*                                108        12635      364/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-01-16 09:32:19.863  - debug: info.0 (13825) Process disks with diskLayout.dev0: {"device":"/dev/sda","type":"HD","name":"USB_DISK_2.0","vendor":"","size":16013852672,"bytesPerSector":null,"totalCylinders":null,"totalHeads":null,"totalSectors":null,"totalTracks":null,"tracksPerCylinder":null,"sectorsPerTrack":null,"firmwareRevision":"PMAP","serialNum":"070B242571216D97","interfaceType":"USB","smartStatus":"unknown","temperature":null}
2023-01-16 09:32:20.254  - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null}
2023-01-16 09:32:20.360  - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.427  - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.564  - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null}
2023-01-16 09:32:20.254  - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null}
2023-01-16 09:32:20.360  - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.427  - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.564  - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null}
2023-01-16 09:32:20.630  - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.630  - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null}
2023-01-16 09:32:20.735  - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null}
2023-01-16 09:32:20.735  - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null}
2023-01-16 09:32:22.534  - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003
2023-01-16 09:32:22.534  - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003
2023-01-16 09:32:23.843  - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0}
2023-01-16 09:32:23.843  - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0}
2023-01-16 09:32:24.083  - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1}
2023-01-16 09:32:24.456  - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0}
2023-01-16 09:32:24.578  - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"}
2023-01-16 09:32:26.208  - debug: info.0 (13825) Process docker with info: {}
2023-01-16 09:32:24.083  - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1}
2023-01-16 09:32:24.456  - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0}
2023-01-16 09:32:24.578  - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"}
2023-01-16 09:32:26.208  - debug: info.0 (13825) Process docker with info: {}


============ Mark until here for C&P =============

iob diag has finished.


Press any key for a summary

Codierknecht

@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)

Dr.Pie

@codierknecht sagte in Meldung beim Starten vom Raspi:

@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)

Das weiss ich wohl
Ich wäre auch schon längst auf was größeres umgestiegen ... aber die Preise sind ja astronomisch.

Glasfaser

@dr-pie

Hast du viele Instanzen auf die Logstufe DEBUG gestellt !? oder nur die Info

Codierknecht

@dr-pie sagte in Meldung beim Starten vom Raspi:

aber die Preise sind ja astronomisch.

Wenn man überhaupt einen bekommt.

Homoran

als Raspi Alternative
https://www.reichelt.de/odroid-c4-4x-2-0-ghz-4-gb-ram-odroid-c4-p283467.html?search=odroid

Thomas Braun

@dr-pie

Grundsätzlich ist die Kiste wohl richtig aufgesetzt.
An das Grafana-Repo musst du aber ran:

https://forum.iobroker.net/topic/62040/linux-debian-grafana-repo-muss-aktualisiert-werden

Läuft auf dem Kistchen auch noch ein Docker?

Du musst halt schauen das du da abspeckst. Spätestens bei einem Backup wird das mehr als eng werden.

crunchip

@dr-pie sagte in Meldung beim Starten vom Raspi:

Das weiss ich wohl

fb-checkpresence könntest du dir eigentlich auch sparen, Anwesenheitserkennung ist mit tr-064 ebenfalls möglich
wenn du den info nicht weiter nutzt, wäre auch dieser entbehrlich
wären dann insgesamt 3 Adapter die bisserl Luft schaffen

Community Forum

NEWS

Meldung beim Starten vom Raspi

Support us

427

32.9k

83.0k

1.3m