Meldung beim Starten vom Raspi
-
@dr-pie sagte in Meldung beim Starten vom Raspi:
Pending OS-Updates: 40
Schieb die 40 Udates auf das System. Und dann die Langform des diag nochmal.
@thomas-braun Moin
======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Berlin User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin Pending iob updates: 1 Active repo(s): stable Objects: 14798 States: 12108 Size of iob-Database: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/objects.json.migrated 8.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.old 0 /opt/iobroker/iobroker-data/objects.json.broken 7.4M /opt/iobroker/iobroker-data/states.jsonl 1.9M /opt/iobroker/iobroker-data/states.json.migrated 1.9M /opt/iobroker/iobroker-data/states.json.bak.migrated 4.0K /opt/iobroker/iobroker-data/states.json.broken 0 /opt/iobroker/iobroker-data/states.json.old =================== END OF SUMMARY ====================Das ist sicher nicht die lange Form .. oder ?
-
@thomas-braun sagte in Meldung beim Starten vom Raspi:
@dr-pie sagte in Meldung beim Starten vom Raspi:
Wie bekomme ich denn raus welche Prozesse vielleicht zu viel sind ?
Welche laufen denn? 2GB RAM ist halt nicht üppig.
Schau mit
iob diagmal rein.
pi@raspberrypi:~ $ iob diag iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] pi@raspberrypi:~ $@homoran sagte in Meldung beim Starten vom Raspi:
@dr-pie sagte in Meldung beim Starten vom Raspi:
Welche Infos benötigt ihr noch ??
nahezu alles!
fangen wir mal an mit
iobroker list instancesundtopkomplette Ein- und Ausgaben aber als Text in code-tags posten, keine Screenshots!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1pi@raspberrypi:~ $ iobroker list instances + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.heos.0 : heos : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.ical.2 : ical : raspberrypi - enabled system.adapter.ical.4 : ical : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5003 + system.adapter.synology.1 : synology : raspberrypi - enabled, port: 5002 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tr-064.1 : tr-064 : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wled.0 : wled : raspberrypi - enabled system.adapter.yamaha.0 : yamaha : raspberrypi - disabled + instance is alivepi@raspberrypi:~ $ iobroker top iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean]Ich hoffe das ich das so alles richtig gemacht habe ...
@dr-pie sagte in Meldung beim Starten vom Raspi:
discovery.0
diesen kannst du zumindest deaktivieren
umgestiegen von Proxmox auf Unraid
-
@thomas-braun Moin
======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Berlin User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin Pending iob updates: 1 Active repo(s): stable Objects: 14798 States: 12108 Size of iob-Database: 19M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/objects.json.migrated 8.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.old 0 /opt/iobroker/iobroker-data/objects.json.broken 7.4M /opt/iobroker/iobroker-data/states.jsonl 1.9M /opt/iobroker/iobroker-data/states.json.migrated 1.9M /opt/iobroker/iobroker-data/states.json.bak.migrated 4.0K /opt/iobroker/iobroker-data/states.json.broken 0 /opt/iobroker/iobroker-data/states.json.old =================== END OF SUMMARY ====================Das ist sicher nicht die lange Form .. oder ?
@dr-pie sagte in Meldung beim Starten vom Raspi:
Das ist sicher nicht die lange Form .. oder ?
Nein, die Langfassung läuft davor über den Screen.
-
@dr-pie sagte in Meldung beim Starten vom Raspi:
discovery.0
diesen kannst du zumindest deaktivieren
@crunchip
Und von influx, shelly und tr-064 laufen mehrere Instanzen. Werden die wirklich benötigt?"Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")
Proxmox 9.1.1 LXC|8 GB|Core i7-6700
HmIP|ZigBee|Tasmota|Unifi
Zabbix Certified Specialist
Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag -
@crunchip
Und von influx, shelly und tr-064 laufen mehrere Instanzen. Werden die wirklich benötigt? -
@dr-pie sagte in Meldung beim Starten vom Raspi:
Das ist sicher nicht die lange Form .. oder ?
Nein, die Langfassung läuft davor über den Screen.
Skript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 09:31:11 up 20 min, 1 user, load average: 1.19, 1.58, 1.57 CPU threads: 4 *** Time and Time Zones *** Mon Jan 16 08:31:11 UTC 2023 Mon Jan 16 09:31:11 CET 2023 CET +0100 Europe/Berlin *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.4G 99M 0.0K 347M 462M Swap: 99M 76M 23M Total: 1.9G 1.5G 123M 1848 M total memory 1401 M used memory 335 M active memory 1282 M inactive memory 99 M free memory 38 M buffer memory 309 M swap cache 99 M total swap 76 M used swap 23 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 15G 99G 13% / devtmpfs devtmpfs 764M 0 764M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 948K 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 50M 203M 20% /boot tmpfs tmpfs 185M 16K 185M 1% /run/user/1000 Messages in dmesg: [Mon Jan 16 09:11:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=DC:A6:32:D7:FB:72 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=174a5f11-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Jan 16 09:11:05 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon Jan 16 09:11:05 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jan 16 09:11:08 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 6.5G /var/ 4.0G /var/log 3.8G /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c 3.8G /var/log/journal 2.3G /var/cache/apt /opt/iobroker/backups: 445M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 714M /opt/iobroker/iobroker-data/ 303M /opt/iobroker/iobroker-data/history 277M /opt/iobroker/iobroker-data/files 89M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.9M /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.heos.0 : heos : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.ical.2 : ical : raspberrypi - enabled system.adapter.ical.4 : ical : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5003 + system.adapter.synology.1 : synology : raspberrypi - enabled, port: 5002 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tr-064.1 : tr-064 : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wled.0 : wled : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5003 + system.adapter.synology.1 : synology : raspberrypi - enabled, port: 5002 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.10 , installed 2.5.10 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "fb-checkpresence": 1.1.20, installed 1.1.20 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "fritzdect" : 2.2.6 , installed 2.2.6 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heos" : 1.10.0 , installed 1.10.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lgtv" : 1.1.10 , installed 1.1.10 Adapter "lgtv11" : 1.0.5 , installed 1.0.5 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.3.3 , installed 0.3.3 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "plex" : 0.9.1 , installed 0.9.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.17 , installed 4.2.17 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-lcars" : 1.0.4 , installed 1.0.4 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yamaha" : 0.5.3 , installed 0.5.3 Objects and States Please stand by - This may take a while Objects: 14798 States: 12071 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_16.x bullseye InRelease Get:5 https://packages.grafana.com/oss/deb stable InRelease [5984 B] Err:5 https://packages.grafana.com/oss/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 14123 505/influxd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11040 551/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 24011 1560/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 23354 1560/iobroker.js-co tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 30759 1978/io.shelly.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14570 494/cupsd tcp6 0 0 :::61991 :::* LISTEN 1001 29292 2060/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 11042 551/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 14569 494/cupsd tcp6 0 0 :::3000 :::* LISTEN 115 13012 498/grafana-server tcp6 0 0 :::8086 :::* LISTEN 999 14863 505/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 23427 1578/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 31704 2202/io.web.0 udp 0 0 0.0.0.0:58991 0.0.0.0:* 1001 124746 12323/io.fullybrows udp 0 0 0.0.0.0:46703 0.0.0.0:* 1001 29450 2168/io.vis-inventw udp 0 0 0.0.0.0:52849 0.0.0.0:* 1001 29620 2202/io.web.0 udp 0 0 0.0.0.0:34419 0.0.0.0:* 1001 23464 1605/io.history.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12904 560/cups-browsed udp 0 0 0.0.0.0:52350 0.0.0.0:* 1001 30363 2120/io.upnp.0 udp 0 0 0.0.0.0:38534 0.0.0.0:* 1001 32447 2217/io.wled.0 udp 0 0 0.0.0.0:33928 0.0.0.0:* 108 12634 364/avahi-daemon: r udp 0 0 0.0.0.0:46753 0.0.0.0:* 1001 29185 2030/io.fb-checkpre udp 0 0 0.0.0.0:34978 0.0.0.0:* 1001 29086 1993/io.backitup.0 udp 0 0 0.0.0.0:34478 0.0.0.0:* 1001 25281 1706/io.influxdb.1 udp 0 0 0.0.0.0:39600 0.0.0.0:* 1001 33898 2247/io.heos.0 udp 0 0 0.0.0.0:54962 0.0.0.0:* 1001 23349 1560/iobroker.js-co udp 0 0 0.0.0.0:59063 0.0.0.0:* 1001 29890 1967/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 29623 2217/io.wled.0 udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 28980 1932/io.tr-064.1 udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 27949 1909/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12632 364/avahi-daemon: r udp 0 0 0.0.0.0:47359 0.0.0.0:* 1001 137152 13825/io.info.0 udp 0 0 0.0.0.0:44810 0.0.0.0:* 1001 28913 1932/io.tr-064.1 udp 0 0 0.0.0.0:55053 0.0.0.0:* 1001 27149 1770/io.ping.0 udp 0 0 0.0.0.0:35607 0.0.0.0:* 1001 33889 2247/io.heos.0 udp 0 0 0.0.0.0:59178 0.0.0.0:* 1001 34999 2315/io.net-tools.0 udp 0 0 0.0.0.0:58184 0.0.0.0:* 1001 29290 2060/io.harmony.0 udp 0 0 0.0.0.0:36179 0.0.0.0:* 1001 26521 1809/io.rpi2.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 34879 2120/io.upnp.0 udp 0 0 0.0.0.0:54207 0.0.0.0:* 1001 25779 1616/io.javascript. udp 0 0 0.0.0.0:36804 0.0.0.0:* 1001 23536 1646/io.sql.0 udp 0 0 0.0.0.0:52678 0.0.0.0:* 1001 27467 1909/io.tr-064.0 udp 0 0 0.0.0.0:53709 0.0.0.0:* 1001 25818 1631/io.scenes.0 udp 0 0 0.0.0.0:33769 0.0.0.0:* 1001 24173 1665/io.whatsapp-cm udp 0 0 0.0.0.0:42480 0.0.0.0:* 1001 24431 1695/io.telegram.0 udp 0 0 0.0.0.0:34299 0.0.0.0:* 1001 34434 2349/io.lgtv.0 udp 0 0 0.0.0.0:56325 0.0.0.0:* 1001 126376 1967/io.shelly.0 udp 0 0 0.0.0.0:35334 0.0.0.0:* 1001 30359 2120/io.upnp.0 udp 0 0 0.0.0.0:41478 0.0.0.0:* 1001 31335 2105/io.tankerkoeni udp 0 0 0.0.0.0:36878 0.0.0.0:* 1001 29734 1888/io.synology.1 udp 0 0 0.0.0.0:52756 0.0.0.0:* 1001 25730 1578/io.admin.0 udp 0 0 0.0.0.0:32800 0.0.0.0:* 1001 30725 1978/io.shelly.1 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 29293 2060/io.harmony.0 udp 0 0 0.0.0.0:33834 0.0.0.0:* 1001 27321 1868/io.synology.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 27597 1967/io.shelly.0 udp 0 0 0.0.0.0:44099 0.0.0.0:* 1001 24207 1680/io.influxdb.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11135 457/dhcpcd udp6 0 0 :::5353 :::* 108 12633 364/avahi-daemon: r udp6 0 0 :::546 :::* 0 14680 457/dhcpcd udp6 0 0 :::37950 :::* 108 12635 364/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-01-16 09:32:19.863 - debug: info.0 (13825) Process disks with diskLayout.dev0: {"device":"/dev/sda","type":"HD","name":"USB_DISK_2.0","vendor":"","size":16013852672,"bytesPerSector":null,"totalCylinders":null,"totalHeads":null,"totalSectors":null,"totalTracks":null,"tracksPerCylinder":null,"sectorsPerTrack":null,"firmwareRevision":"PMAP","serialNum":"070B242571216D97","interfaceType":"USB","smartStatus":"unknown","temperature":null} 2023-01-16 09:32:20.254 - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.360 - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.427 - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.564 - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null} 2023-01-16 09:32:20.254 - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.360 - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.427 - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.564 - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null} 2023-01-16 09:32:20.630 - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.630 - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.735 - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.735 - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:22.534 - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003 2023-01-16 09:32:22.534 - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003 2023-01-16 09:32:23.843 - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0} 2023-01-16 09:32:23.843 - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0} 2023-01-16 09:32:24.083 - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1} 2023-01-16 09:32:24.456 - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0} 2023-01-16 09:32:24.578 - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"} 2023-01-16 09:32:26.208 - debug: info.0 (13825) Process docker with info: {} 2023-01-16 09:32:24.083 - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1} 2023-01-16 09:32:24.456 - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0} 2023-01-16 09:32:24.578 - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"} 2023-01-16 09:32:26.208 - debug: info.0 (13825) Process docker with info: {} ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
@codierknecht ja, je nach Anwendung
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)"Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")
Proxmox 9.1.1 LXC|8 GB|Core i7-6700
HmIP|ZigBee|Tasmota|Unifi
Zabbix Certified Specialist
Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag -
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)@codierknecht sagte in Meldung beim Starten vom Raspi:
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)Das weiss ich wohl
Ich wäre auch schon längst auf was größeres umgestiegen ... aber die Preise sind ja astronomisch. -
Skript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 09:31:11 up 20 min, 1 user, load average: 1.19, 1.58, 1.57 CPU threads: 4 *** Time and Time Zones *** Mon Jan 16 08:31:11 UTC 2023 Mon Jan 16 09:31:11 CET 2023 CET +0100 Europe/Berlin *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.4G 99M 0.0K 347M 462M Swap: 99M 76M 23M Total: 1.9G 1.5G 123M 1848 M total memory 1401 M used memory 335 M active memory 1282 M inactive memory 99 M free memory 38 M buffer memory 309 M swap cache 99 M total swap 76 M used swap 23 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 15G 99G 13% / devtmpfs devtmpfs 764M 0 764M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 948K 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 50M 203M 20% /boot tmpfs tmpfs 185M 16K 185M 1% /run/user/1000 Messages in dmesg: [Mon Jan 16 09:11:04 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=DC:A6:32:D7:FB:72 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=174a5f11-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Jan 16 09:11:05 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Mon Jan 16 09:11:05 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Jan 16 09:11:08 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 6.5G /var/ 4.0G /var/log 3.8G /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c 3.8G /var/log/journal 2.3G /var/cache/apt /opt/iobroker/backups: 445M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 714M /opt/iobroker/iobroker-data/ 303M /opt/iobroker/iobroker-data/history 277M /opt/iobroker/iobroker-data/files 89M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/files/telegram.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.9M /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.heos.0 : heos : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.ical.2 : ical : raspberrypi - enabled system.adapter.ical.4 : ical : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5003 + system.adapter.synology.1 : synology : raspberrypi - enabled, port: 5002 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tr-064.1 : tr-064 : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wled.0 : wled : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5003 + system.adapter.synology.1 : synology : raspberrypi - enabled, port: 5002 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.10 , installed 2.5.10 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "fb-checkpresence": 1.1.20, installed 1.1.20 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "fritzdect" : 2.2.6 , installed 2.2.6 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heos" : 1.10.0 , installed 1.10.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lgtv" : 1.1.10 , installed 1.1.10 Adapter "lgtv11" : 1.0.5 , installed 1.0.5 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.3.3 , installed 0.3.3 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "plex" : 0.9.1 , installed 0.9.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.17 , installed 4.2.17 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-lcars" : 1.0.4 , installed 1.0.4 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yamaha" : 0.5.3 , installed 0.5.3 Objects and States Please stand by - This may take a while Objects: 14798 States: 12071 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_16.x bullseye InRelease Get:5 https://packages.grafana.com/oss/deb stable InRelease [5984 B] Err:5 https://packages.grafana.com/oss/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 14123 505/influxd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11040 551/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 24011 1560/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 23354 1560/iobroker.js-co tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 30759 1978/io.shelly.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14570 494/cupsd tcp6 0 0 :::61991 :::* LISTEN 1001 29292 2060/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 11042 551/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 14569 494/cupsd tcp6 0 0 :::3000 :::* LISTEN 115 13012 498/grafana-server tcp6 0 0 :::8086 :::* LISTEN 999 14863 505/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 23427 1578/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 31704 2202/io.web.0 udp 0 0 0.0.0.0:58991 0.0.0.0:* 1001 124746 12323/io.fullybrows udp 0 0 0.0.0.0:46703 0.0.0.0:* 1001 29450 2168/io.vis-inventw udp 0 0 0.0.0.0:52849 0.0.0.0:* 1001 29620 2202/io.web.0 udp 0 0 0.0.0.0:34419 0.0.0.0:* 1001 23464 1605/io.history.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 12904 560/cups-browsed udp 0 0 0.0.0.0:52350 0.0.0.0:* 1001 30363 2120/io.upnp.0 udp 0 0 0.0.0.0:38534 0.0.0.0:* 1001 32447 2217/io.wled.0 udp 0 0 0.0.0.0:33928 0.0.0.0:* 108 12634 364/avahi-daemon: r udp 0 0 0.0.0.0:46753 0.0.0.0:* 1001 29185 2030/io.fb-checkpre udp 0 0 0.0.0.0:34978 0.0.0.0:* 1001 29086 1993/io.backitup.0 udp 0 0 0.0.0.0:34478 0.0.0.0:* 1001 25281 1706/io.influxdb.1 udp 0 0 0.0.0.0:39600 0.0.0.0:* 1001 33898 2247/io.heos.0 udp 0 0 0.0.0.0:54962 0.0.0.0:* 1001 23349 1560/iobroker.js-co udp 0 0 0.0.0.0:59063 0.0.0.0:* 1001 29890 1967/io.shelly.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 29623 2217/io.wled.0 udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 28980 1932/io.tr-064.1 udp 0 0 192.168.178.23:5353 0.0.0.0:* 1001 27949 1909/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12632 364/avahi-daemon: r udp 0 0 0.0.0.0:47359 0.0.0.0:* 1001 137152 13825/io.info.0 udp 0 0 0.0.0.0:44810 0.0.0.0:* 1001 28913 1932/io.tr-064.1 udp 0 0 0.0.0.0:55053 0.0.0.0:* 1001 27149 1770/io.ping.0 udp 0 0 0.0.0.0:35607 0.0.0.0:* 1001 33889 2247/io.heos.0 udp 0 0 0.0.0.0:59178 0.0.0.0:* 1001 34999 2315/io.net-tools.0 udp 0 0 0.0.0.0:58184 0.0.0.0:* 1001 29290 2060/io.harmony.0 udp 0 0 0.0.0.0:36179 0.0.0.0:* 1001 26521 1809/io.rpi2.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 34879 2120/io.upnp.0 udp 0 0 0.0.0.0:54207 0.0.0.0:* 1001 25779 1616/io.javascript. udp 0 0 0.0.0.0:36804 0.0.0.0:* 1001 23536 1646/io.sql.0 udp 0 0 0.0.0.0:52678 0.0.0.0:* 1001 27467 1909/io.tr-064.0 udp 0 0 0.0.0.0:53709 0.0.0.0:* 1001 25818 1631/io.scenes.0 udp 0 0 0.0.0.0:33769 0.0.0.0:* 1001 24173 1665/io.whatsapp-cm udp 0 0 0.0.0.0:42480 0.0.0.0:* 1001 24431 1695/io.telegram.0 udp 0 0 0.0.0.0:34299 0.0.0.0:* 1001 34434 2349/io.lgtv.0 udp 0 0 0.0.0.0:56325 0.0.0.0:* 1001 126376 1967/io.shelly.0 udp 0 0 0.0.0.0:35334 0.0.0.0:* 1001 30359 2120/io.upnp.0 udp 0 0 0.0.0.0:41478 0.0.0.0:* 1001 31335 2105/io.tankerkoeni udp 0 0 0.0.0.0:36878 0.0.0.0:* 1001 29734 1888/io.synology.1 udp 0 0 0.0.0.0:52756 0.0.0.0:* 1001 25730 1578/io.admin.0 udp 0 0 0.0.0.0:32800 0.0.0.0:* 1001 30725 1978/io.shelly.1 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 29293 2060/io.harmony.0 udp 0 0 0.0.0.0:33834 0.0.0.0:* 1001 27321 1868/io.synology.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 27597 1967/io.shelly.0 udp 0 0 0.0.0.0:44099 0.0.0.0:* 1001 24207 1680/io.influxdb.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11135 457/dhcpcd udp6 0 0 :::5353 :::* 108 12633 364/avahi-daemon: r udp6 0 0 :::546 :::* 0 14680 457/dhcpcd udp6 0 0 :::37950 :::* 108 12635 364/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-01-16 09:32:19.863 - debug: info.0 (13825) Process disks with diskLayout.dev0: {"device":"/dev/sda","type":"HD","name":"USB_DISK_2.0","vendor":"","size":16013852672,"bytesPerSector":null,"totalCylinders":null,"totalHeads":null,"totalSectors":null,"totalTracks":null,"tracksPerCylinder":null,"sectorsPerTrack":null,"firmwareRevision":"PMAP","serialNum":"070B242571216D97","interfaceType":"USB","smartStatus":"unknown","temperature":null} 2023-01-16 09:32:20.254 - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.360 - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.427 - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.564 - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null} 2023-01-16 09:32:20.254 - debug: info.0 (13825) Process usb with dev0: {"bus":2,"deviceId":1,"id":"1d6b:0003","name":"3.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.360 - debug: info.0 (13825) Process usb with dev1: {"bus":1,"deviceId":5,"id":"17ef:602e","name":"","type":"Human Interface Device","removable":null,"vendor":"Lenovo","manufacturer":"PixArt","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.427 - debug: info.0 (13825) Process usb with dev2: {"bus":1,"deviceId":4,"id":"0461:0010","name":"HP PR1101U / Primax PMX-KPR1101U Keyboard","type":"Keyboard","removable":null,"vendor":"Primax Electronics, Ltd","manufacturer":"NOVATEK","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.564 - debug: info.0 (13825) Process usb with dev3: {"bus":1,"deviceId":3,"id":"13fe:3e00","name":"Flash Drive","type":"Storage","removable":null,"vendor":"Kingston Technology Company Inc.","manufacturer":"","maxPower":"200mA","serialNumber":null} 2023-01-16 09:32:20.630 - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.630 - debug: info.0 (13825) Process usb with dev4: {"bus":1,"deviceId":2,"id":"2109:3431","name":"Hub","type":"Hub","removable":null,"vendor":"VIA Labs, Inc.","manufacturer":"","maxPower":"100mA","serialNumber":null} 2023-01-16 09:32:20.735 - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:20.735 - debug: info.0 (13825) Process usb with dev5: {"bus":1,"deviceId":1,"id":"1d6b:0002","name":"2.0 root hub","type":"Hub","removable":null,"vendor":"Linux Foundation","manufacturer":"Linux 5.15.84-v7l+ xhci-hcd","maxPower":"0mA","serialNumber":null} 2023-01-16 09:32:22.534 - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003 2023-01-16 09:32:22.534 - info: synology.0 (1868) Connecting to Synology 192.168.178.203:5003 2023-01-16 09:32:23.843 - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0} 2023-01-16 09:32:23.843 - debug: info.0 (13825) Process network with interfaces.iface0: {"iface":"lo","ifaceName":"lo","default":false,"ip4":"127.0.0.1","ip4subnet":"255.0.0.0","ip6":"::1","ip6subnet":"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff","mac":"00:00:00:00:00:00","internal":true,"virtual":false,"operstate":"unknown","type":"virtual","duplex":"","mtu":65536,"speed":null,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":0} 2023-01-16 09:32:24.083 - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1} 2023-01-16 09:32:24.456 - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0} 2023-01-16 09:32:24.578 - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"} 2023-01-16 09:32:26.208 - debug: info.0 (13825) Process docker with info: {} 2023-01-16 09:32:24.083 - debug: info.0 (13825) Process network with interfaces.iface1: {"iface":"eth0","ifaceName":"eth0","default":true,"ip4":"192.168.178.23","ip4subnet":"255.255.255.0","ip6":"2a02:8109:2740:2e30:1a2c:1d91:41f4:4747","ip6subnet":"ffff:ffff:ffff:ffff::","mac":"dc:a6:32:d7:fb:72","internal":false,"virtual":false,"operstate":"up","type":"wired","duplex":"full","mtu":1500,"speed":1000,"dhcp":false,"dnsSuffix":"Unknown","ieee8021xAuth":"Not defined","ieee8021xState":"Disabled","carrierChanges":1} 2023-01-16 09:32:24.456 - debug: info.0 (13825) Process network with stats.iface0: {"iface":"eth0","operstate":"up","rx_bytes":73093758,"rx_dropped":0,"rx_errors":0,"tx_bytes":148688670,"tx_dropped":0,"tx_errors":0,"rx_sec":null,"tx_sec":null,"ms":0} 2023-01-16 09:32:24.578 - debug: info.0 (13825) Process wifi with interfaces.iface0: {"id":3,"iface":"wlan0","model":null,"vendor":null,"mac":"dc:a6:32:d7:fb:73"} 2023-01-16 09:32:26.208 - debug: info.0 (13825) Process docker with info: {} ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
@codierknecht sagte in Meldung beim Starten vom Raspi:
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)Das weiss ich wohl
Ich wäre auch schon längst auf was größeres umgestiegen ... aber die Preise sind ja astronomisch.@dr-pie sagte in Meldung beim Starten vom Raspi:
aber die Preise sind ja astronomisch.
Wenn man überhaupt einen bekommt.
-
-
@codierknecht sagte in Meldung beim Starten vom Raspi:
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)Das weiss ich wohl
Ich wäre auch schon längst auf was größeres umgestiegen ... aber die Preise sind ja astronomisch.@dr-pie
Grundsätzlich ist die Kiste wohl richtig aufgesetzt.
An das Grafana-Repo musst du aber ran:https://forum.iobroker.net/topic/62040/linux-debian-grafana-repo-muss-aktualisiert-werden
Läuft auf dem Kistchen auch noch ein Docker?
Du musst halt schauen das du da abspeckst. Spätestens bei einem Backup wird das mehr als eng werden.
-
@codierknecht sagte in Meldung beim Starten vom Raspi:
@crunchip
Naja - bei einer so kleinen Kiste sollte man sich dazu ggf. mal Gedanken machen.
Irgendwann ist halt Ende der Fahnenstange ;-)Das weiss ich wohl
Ich wäre auch schon längst auf was größeres umgestiegen ... aber die Preise sind ja astronomisch.@dr-pie sagte in Meldung beim Starten vom Raspi:
Das weiss ich wohl
fb-checkpresence könntest du dir eigentlich auch sparen, Anwesenheitserkennung ist mit tr-064 ebenfalls möglich
wenn du den info nicht weiter nutzt, wäre auch dieser entbehrlich
wären dann insgesamt 3 Adapter die bisserl Luft schaffenumgestiegen von Proxmox auf Unraid
-
@dr-pie sagte in Meldung beim Starten vom Raspi:
Das weiss ich wohl
fb-checkpresence könntest du dir eigentlich auch sparen, Anwesenheitserkennung ist mit tr-064 ebenfalls möglich
wenn du den info nicht weiter nutzt, wäre auch dieser entbehrlich
wären dann insgesamt 3 Adapter die bisserl Luft schaffenOk ... danke erst mal für die vielen Tipps .
Ich habe erst mal 3 Adapter angehalten:
fb-checkpresence
info
discovery.0Mal sehen ob das etwas hilft.
Früher oder später wer ich wohl einen "größeren" brauchen.Anfangs hatte ich das alles auf einer Synology installiert.
Da ich aber günstig an den raspi gekommen war, habe ich alles umgestellt und konnte die Syno zumindest abschalten und nur für Updates hochfahren. -
Ok ... danke erst mal für die vielen Tipps .
Ich habe erst mal 3 Adapter angehalten:
fb-checkpresence
info
discovery.0Mal sehen ob das etwas hilft.
Früher oder später wer ich wohl einen "größeren" brauchen.Anfangs hatte ich das alles auf einer Synology installiert.
Da ich aber günstig an den raspi gekommen war, habe ich alles umgestellt und konnte die Syno zumindest abschalten und nur für Updates hochfahren.@dr-pie sagte in Meldung beim Starten vom Raspi:
Anfangs hatte ich das alles auf einer Synology installiert.
Da ich aber günstig an den raspi gekommen war, habe ich alles umgestellt und konnte die Syno zumindest abschalten und nur für Updates hochfahren.Die läuft bei Dir nicht 24/7 ?
Meine jedenfalls schon - sonst macht so ein NAS (zumindest für mich) auch relativ wenig Sinn.
Ich will die ja nicht erst einschalten müssen, um mal eine Datei zu schreiben oder zu lesen.
Da laufen auch 'ne ganze Menge anderer Dienste, die mehr oder weniger ständig gebraucht werden."Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")
Proxmox 9.1.1 LXC|8 GB|Core i7-6700
HmIP|ZigBee|Tasmota|Unifi
Zabbix Certified Specialist
Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag -
@dr-pie sagte in Meldung beim Starten vom Raspi:
Anfangs hatte ich das alles auf einer Synology installiert.
Da ich aber günstig an den raspi gekommen war, habe ich alles umgestellt und konnte die Syno zumindest abschalten und nur für Updates hochfahren.Die läuft bei Dir nicht 24/7 ?
Meine jedenfalls schon - sonst macht so ein NAS (zumindest für mich) auch relativ wenig Sinn.
Ich will die ja nicht erst einschalten müssen, um mal eine Datei zu schreiben oder zu lesen.
Da laufen auch 'ne ganze Menge anderer Dienste, die mehr oder weniger ständig gebraucht werden.@codierknecht sagte in Meldung beim Starten vom Raspi:
Die läuft bei Dir nicht 24/7 ?
Meine jedenfalls schon - sonst macht so ein NAS (zumindest für mich) auch relativ wenig Sinn.
Ich will die ja nicht erst einschalten müssen, um mal eine Datei zu schreiben oder zu lesen.
Da laufen auch 'ne ganze Menge anderer Dienste, die mehr oder weniger ständig gebraucht werden.Nein die läuft nicht mehr 24/7.
Ich habe durch die Verdopplung der Strompreise mal ein wenig an Technik runter gefahren.
Da kommt dann schon so einiges zusammen.Da sich meine technische Situation geändert hat brauche ich die eine Syno nun auch nicht mehr bzw nur noch selten.
Ich habe ja auch noch 2 andere.
Eine DS 213 j die schon seit 2 Jahren off ist und eine DS 1019+ für Plex, streaming Sachen und halt zur Datensicherung. -
@codierknecht sagte in Meldung beim Starten vom Raspi:
Die läuft bei Dir nicht 24/7 ?
Meine jedenfalls schon - sonst macht so ein NAS (zumindest für mich) auch relativ wenig Sinn.
Ich will die ja nicht erst einschalten müssen, um mal eine Datei zu schreiben oder zu lesen.
Da laufen auch 'ne ganze Menge anderer Dienste, die mehr oder weniger ständig gebraucht werden.Nein die läuft nicht mehr 24/7.
Ich habe durch die Verdopplung der Strompreise mal ein wenig an Technik runter gefahren.
Da kommt dann schon so einiges zusammen.Da sich meine technische Situation geändert hat brauche ich die eine Syno nun auch nicht mehr bzw nur noch selten.
Ich habe ja auch noch 2 andere.
Eine DS 213 j die schon seit 2 Jahren off ist und eine DS 1019+ für Plex, streaming Sachen und halt zur Datensicherung.@dr-pie sagte in Meldung beim Starten vom Raspi:
und eine DS 1019+ für Plex, streaming Sachen und halt zur Datensicherung
Und die fährst Du nur hoch wenn sie gebraucht wird?
"Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")
Proxmox 9.1.1 LXC|8 GB|Core i7-6700
HmIP|ZigBee|Tasmota|Unifi
Zabbix Certified Specialist
Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag -
@dr-pie sagte in Meldung beim Starten vom Raspi:
und eine DS 1019+ für Plex, streaming Sachen und halt zur Datensicherung
Und die fährst Du nur hoch wenn sie gebraucht wird?
@codierknecht sagte in Meldung beim Starten vom Raspi:
Und die fährst Du nur hoch wenn sie gebraucht wird?
Ja genau.
Ich schaue derzeitig wenig über die Syno.
Datensicherung machen ich immer am WE.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden265
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge