ZigBee neue Version 1.6.x

arteck

@mickym sagte in ZigBee neue Version 1.6.0:

Im Vergleich zum CC2531 ist

das ist doch kein Vergleich..ist so als würest du einen Trabi mit Porsche vergleichen.. es sind beide Autos und bringen dich da wo du hin willst...

vergiss es..

mickym

@mickym So heute ist der Adapter plötzlich wieder abgestürzt und war in einer Endlosschleife.

Aus heiterem Himmel - habe zwar noch 15 Min vorher vom Log dran, aber das sagt nichts. Wenn das häufiger auftritt muss ich wohl doch mal debug einschalten:

Abhilfe brachte nur ein kompletter Neustart des Systems - Stick ziehen und wieder reinstecken hat nichts gebracht.

2021-09-30 20:00:00.122 - info: host.MWHome instance system.adapter.dwd.0 started with pid 21041
2021-09-30 20:00:03.541 - info: dwd.0 (21041) starting. Version 2.7.7 in /opt/iobroker/node_modules/iobroker.dwd, node: v14.17.6, js-controller: 3.3.18
2021-09-30 20:00:08.080 - info: dwd.0 (21041) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-09-30 20:00:08.619 - info: host.MWHome instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-09-30 20:12:15.078 - error: zigbee.0 (27949) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-09-30 20:12:15.080 - error: zigbee.0 (27949) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:12:15.180 - error: zigbee.0 (27949) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:12:15.180 - error: zigbee.0 (27949) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:12:15.192 - info: zigbee.0 (27949) cleaned everything up...
2021-09-30 20:12:15.195 - info: zigbee.0 (27949) Zigbee: disabling joining new devices.
2021-09-30 20:12:15.693 - info: zigbee.0 (27949) terminating
2021-09-30 20:12:15.695 - warn: zigbee.0 (27949) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-09-30 20:12:16.318 - error: host.MWHome Caught by controller[1]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2021-09-30 20:12:16.324 - error: host.MWHome Caught by controller[2]: Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:12:16.324 - error: host.MWHome Caught by controller[2]: at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
2021-09-30 20:12:16.325 - error: host.MWHome Caught by controller[2]: at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
2021-09-30 20:12:16.325 - error: host.MWHome Caught by controller[2]: at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:12:16.325 - error: host.MWHome instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-09-30 20:12:16.326 - info: host.MWHome Restart adapter system.adapter.zigbee.0 because enabled
2021-09-30 20:12:46.432 - info: host.MWHome instance system.adapter.zigbee.0 started with pid 23639
2021-09-30 20:12:50.667 - info: zigbee.0 (23639) starting. Version 1.6.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.17.6, js-controller: 3.3.18
2021-09-30 20:12:50.788 - info: zigbee.0 (23639) Starting Zigbee npm ...
2021-09-30 20:12:51.459 - error: zigbee.0 (23639) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'"
2021-09-30 20:12:51.460 - error: zigbee.0 (23639) Failed to start Zigbee
2021-09-30 20:12:51.461 - error: zigbee.0 (23639) Error herdsman start
2021-09-30 20:12:51.463 - info: zigbee.0 (23639) Installed Version: iobroker.zigbee@1.6.0
2021-09-30 20:13:01.464 - info: zigbee.0 (23639) Try to reconnect. 1 attempts left
2021-09-30 20:13:01.465 - info: zigbee.0 (23639) Starting Zigbee npm ...
2021-09-30 20:13:01.491 - info: zigbee.0 (23639) Installed Version: iobroker.zigbee@1.6.0
2021-09-30 20:13:01.734 - error: zigbee.0 (23639) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'"
2021-09-30 20:13:01.735 - error: zigbee.0 (23639) Failed to start Zigbee
2021-09-30 20:13:01.735 - error: zigbee.0 (23639) Error herdsman start
2021-09-30 20:13:21.333 - error: zigbee.0 (23639) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-09-30 20:13:21.334 - error: zigbee.0 (23639) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:13:21.336 - error: zigbee.0 (23639) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:13:21.337 - error: zigbee.0 (23639) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:13:21.356 - info: zigbee.0 (23639) cleaned everything up...
2021-09-30 20:13:21.362 - info: zigbee.0 (23639) Zigbee: disabling joining new devices.
2021-09-30 20:13:21.569 - info: zigbee.0 (23639) terminating
2021-09-30 20:13:21.571 - warn: zigbee.0 (23639) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-09-30 20:13:22.203 - error: host.MWHome Caught by controller[1]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2021-09-30 20:13:22.204 - error: host.MWHome Caught by controller[2]: Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:13:22.204 - error: host.MWHome Caught by controller[2]: at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
2021-09-30 20:13:22.205 - error: host.MWHome Caught by controller[2]: at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
2021-09-30 20:13:22.205 - error: host.MWHome Caught by controller[2]: at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:13:22.206 - error: host.MWHome instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-09-30 20:13:22.207 - info: host.MWHome Restart adapter system.adapter.zigbee.0 because enabled
2021-09-30 20:13:52.282 - info: host.MWHome instance system.adapter.zigbee.0 started with pid 23888
2021-09-30 20:13:56.700 - info: zigbee.0 (23888) starting. Version 1.6.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.17.6, js-controller: 3.3.18
2021-09-30 20:13:56.817 - info: zigbee.0 (23888) Starting Zigbee npm ...
2021-09-30 20:13:57.305 - info: zigbee.0 (23888) Installed Version: iobroker.zigbee@1.6.0
2021-09-30 20:13:57.441 - error: zigbee.0 (23888) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'"
2021-09-30 20:13:57.442 - error: zigbee.0 (23888) Failed to start Zigbee
2021-09-30 20:13:57.443 - error: zigbee.0 (23888) Error herdsman start
2021-09-30 20:14:07.447 - info: zigbee.0 (23888) Try to reconnect. 1 attempts left
2021-09-30 20:14:07.450 - info: zigbee.0 (23888) Starting Zigbee npm ...
2021-09-30 20:14:07.524 - info: zigbee.0 (23888) Installed Version: iobroker.zigbee@1.6.0
2021-09-30 20:14:07.718 - error: zigbee.0 (23888) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'"
2021-09-30 20:14:07.719 - error: zigbee.0 (23888) Failed to start Zigbee
2021-09-30 20:14:07.720 - error: zigbee.0 (23888) Error herdsman start
2021-09-30 20:14:27.311 - error: zigbee.0 (23888) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-09-30 20:14:27.314 - error: zigbee.0 (23888) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:14:27.318 - error: zigbee.0 (23888) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:14:27.319 - error: zigbee.0 (23888) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:14:27.356 - info: zigbee.0 (23888) cleaned everything up...
2021-09-30 20:14:27.370 - info: zigbee.0 (23888) Zigbee: disabling joining new devices.
2021-09-30 20:14:27.559 - info: zigbee.0 (23888) terminating
2021-09-30 20:14:27.560 - warn: zigbee.0 (23888) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-09-30 20:14:28.212 - error: host.MWHome Caught by controller[1]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2021-09-30 20:14:28.213 - error: host.MWHome Caught by controller[2]: Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM0'
2021-09-30 20:14:28.214 - error: host.MWHome Caught by controller[2]: at SerialPort. (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
2021-09-30 20:14:28.214 - error: host.MWHome Caught by controller[2]: at SerialPort._error (/opt/iobroker/node_modules/@serialport/stream/lib/index.js:198:14)
2021-09-30 20:14:28.215 - error: host.MWHome Caught by controller[2]: at /opt/iobroker/node_modules/@serialport/stream/lib/index.js:242:12
2021-09-30 20:14:28.215 - error: host.MWHome instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-09-30 20:14:28.216 - info: host.MWHome Restart adapter system.adapter.zigbee.0 because enabled
2021-09-30 20:14:28.217 - warn: host.MWHome Do not restart adapter system.adapter.zigbee.0 because restart loop detected
2021-09-30 20:15:00.088 - info: host.MWHome instance system.adapter.dwd.0 started with pid 24126
2021-09-30 20:15:05.055 - info: dwd.0 (24126) starting. Version 2.7.7 in /opt/iobroker/node_modules/iobroker.dwd, node: v14.17.6, js-controller: 3.3.18
2021-09-30 20:15:07.510 - info: dwd.0 (24126) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-09-30 20:15:08.056 - info: host.MWHome instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Nach Neustart nun alles wieder ruhig und normal

Thomas Braun

@mickym sagte in ZigBee neue Version 1.6.0:

Error: Error: No such file or directory, cannot open /dev/ttyACM0

Hinterleg den Link 'by-id' im Adapter.

mickym

@thomas-braun Hab ich gemacht - mal schauen, ob das was bringt

mickym

Sporadisch immer noch Absturz - insofern haben FW Update und Umstellung auf ID nichts gebracht. Passiert vielleicht alle 3 Tage 1 Mal - aber irgendwas wird halt nicht richtig abgefangen.

2021-10-06 07:19:19.207 - error: zigbee.0 (10138) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-10-06 07:19:19.207 - error: zigbee.0 (10138) unhandled promise rejection: undefined
2021-10-06 07:19:19.209 - info: zigbee.0 (10138) cleaned everything up...
2021-10-06 07:19:19.300 - info: zigbee.0 (10138) Zigbee: disabling joining new devices.
2021-10-06 07:19:19.628 - info: zigbee.0 (10138) terminating
2021-10-06 07:19:19.630 - warn: zigbee.0 (10138) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-10-06 07:19:20.247 - error: host.MWHome Caught by controller[1]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2021-10-06 07:19:20.253 - error: host.MWHome Caught by controller[2]: undefined
2021-10-06 07:19:20.254 - error: host.MWHome instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-10-06 07:19:20.255 - info: host.MWHome Restart adapter system.adapter.zigbee.0 because enabled
2021-10-06 07:19:50.298 - info: host.MWHome instance system.adapter.zigbee.0 started with pid 31577
2021-10-06 07:19:54.744 - info: zigbee.0 (31577) starting. Version 1.6.0 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.18.0, js-controller: 3.3.18
2021-10-06 07:19:54.866 - info: zigbee.0 (31577) Starting Zigbee npm ...
2021-10-06 07:19:55.286 - info: zigbee.0 (31577) Installed Version: iobroker.zigbee@1.6.0
2021-10-06 07:19:55.462 - info: zigbee.0 (31577) Coordinator firmware version: {"type":"ConBee2/RaspBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":112,"maintrel":0,"revision":"0x26700700"}}
2021-10-06 07:19:55.486 - info: zigbee.0 (31577) Unable to disable LED, unsupported function.
2021-10-06 07:19:55.640 - info: zigbee.0 (31577) --> transmitPower : normal
2021-10-06 07:19:55.722 - info: zigbee.0 (31577) Unable to set transmit power, unsupported function.
2021-10-06 07:19:55.728 - info: zigbee.0 (31577) Currently 21 devices are joined:

Ich verfolge, dass aber erst mal nicht weiter, weil sonst bis auf die Gruppenfunktion mit dem Fehlern im Log alles funktioniert.

Thomas Braun

@mickym sagte in ZigBee neue Version 1.6.0:

Version 1.6.0

In stable ist 1.5.6, in beta 1.6.3.

mickym

@thomas-braun Auf github vielleicht, aber in der normalen Beta ist immer noch 1.6.0

Aber egal - solange es in der Häufigkeit passiert -stört mich das nicht und warte lieber bis das Gruppenproblem gelöst ist.

Thomas Braun

@mickym

Nope:

zigbee
github:	1.6.4
latest:	1.6.3 for 8 days
stable:	1.5.6 for 4 months

mickym

@thomas-braun

Na nun hat es der Info Adapter gefunden - war aber keine gute Idee - da Installation fehlschlug und nun gar nichts mehr geht:

$ ./iobroker upgrade zigbee
Update zigbee from @1.6.0 to @1.6.3
host.MWHome Adapter "system.adapter.zigbee.0" is stopped.
NPM version: 6.14.15npm install iobroker.zigbee@1.6.3 --loglevel error --prefix "/opt/iobroker" (System call)
make: g++: Datei oder Verzeichnis nicht gefunden
make: *** [bindings.target.mk:112: Release/obj.target/bindings/src/serialport.o] Fehler 127gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stack     at ChildProcess.emit (events.js:400:28)gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12)gyp ERR! System Linux 5.10.63-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@serialport/bindingsgyp ERR! node -v v14.18.0gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok 
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! @serialport/bindings@9.2.3 install: `prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild`npm ERR! Exit status 1npm ERR! npm ERR! Failed at the @serialport/bindings@9.2.3 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2021-10-06T14_10_43_237Z-debug.log
ERROR: host.MWHome Cannot install iobroker.zigbee@1.6.3: 1
ERROR: process exited with code 25

Irgendwie fehlt wohl ein Kompiler.

EDIT: Hat sich von selbst wieder repariert - und ist wieder auf 1.6.0 gesprungen!!!! -

oder muss ich den C++ Compiler installieren???

apt-get install g++

EDIT2: OK nach Installation des Compilers hat Update auf 1.6.3 funktioniert.

Die Gruppenfehler sind aber nach wie vor noch vorhanden - aber nun läuft 1.6.3

2021-10-06 16:23:48.130 - info: host.MWHome iobroker Adapter "zigbee" updated
2021-10-06 16:23:48.139 - info: host.MWHome iobroker host.MWHome Adapter "system.adapter.zigbee.0" is started
2021-10-06 16:23:48.201 - info: host.MWHome "system.adapter.zigbee.0" enabled
2021-10-06 16:23:48.359 - info: host.MWHome instance system.adapter.zigbee.0 started with pid 13645
2021-10-06 16:23:49.326 - info: host.MWHome iobroker exit 0
2021-10-06 16:23:53.783 - info: zigbee.0 (13645) starting. Version 1.6.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.18.0, js-controller: 3.3.18
2021-10-06 16:23:53.957 - info: zigbee.0 (13645) Starting Zigbee npm ...
2021-10-06 16:23:54.532 - info: zigbee.0 (13645) Installed Version: iobroker.zigbee@1.6.3
2021-10-06 16:23:54.679 - info: zigbee.0 (13645) Coordinator firmware version: {"type":"ConBee2/RaspBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":112,"maintrel":0,"revision":"0x26700700"}}
2021-10-06 16:23:54.701 - info: zigbee.0 (13645) Unable to disable LED, unsupported function.
2021-10-06 16:23:54.830 - info: zigbee.0 (13645) --> transmitPower : normal
2021-10-06 16:23:54.925 - info: zigbee.0 (13645) Unable to set transmit power, unsupported function.
2021-10-06 16:23:54.932 - info: zigbee.0 (13645) Currently 21 devices are joined

Thomas Braun

@mickym

Ist das build-essential Paket installiert? Das sollte eigentlich alles mitschleppen.

mickym

@thomas-braun

Anscheinend nicht?? - sonst müsste wahrscheinlich auch installiert in KLammern dahinter stehen?:

apt list build-essential
Auflistung… Fertig
build-essential/stable 12.9 armhf

aber wie gesagt - ich hab jetzt g++ noch installiert und dann lief auch das zigbee update.

apt list g++
Auflistung… Fertig
g++/stable,now 4:10.2.1-1+rpi1 armhf  [installiert]

Thomas Braun

@mickym

apt policy build-essential

Ich würde es aber auf jedenfall als meta-Paket nachinstallieren. Das ist einfach am 'rundesten' für das Thema 'Kompilieren'.

mickym

@thomas-braun

apt policy build-essential
build-essential:
  Installiert:           (keine)
  Installationskandidat: 12.9
  Versionstabelle:
     12.9 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

mickym

@thomas-braun sagte in ZigBee neue Version 1.6.0:

@mickym
apt policy build-essential
Ich würde es aber auf jedenfall als meta-Paket nachinstallieren. Das ist einfach am 'rundesten' für das Thema 'Kompilieren'.

Habs nun installiert:

apt policy build-essential
build-essential:
  Installiert:           12.9
  Installationskandidat: 12.9
  Versionstabelle:
 *** 12.9 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
        100 /var/lib/dpkg/status

bzw.

apt list build-essential
Auflistung… Fertig
build-essential/stable,now 12.9 armhf  [installiert]

mickym

Kurzes Zwischenfazit mit Version 1.6.3 - seit 5 Tagen keinen einzigen Absturz mehr.

disaster123

Hallo, ich erhalte immer mal wieder folgende Meldungen von verschiedenen Geräten / IDs im Log:
"
(237) Send command to 0x84fd27fffe812d46 failed with no error code (no response received)
"

Alle Geräte haben in der Übersicht > 190 Empfang und werden grün in der Netzwerkübersicht dargestellt. in >90% schalten sie aber dennoch korrekt. In 10% der Fälle schalten sie gar nicht. Das Ganze tritt bei mehreren Geräten an völlig unterschiedlichen Stellen im Haus auf.

Irgendjemand einen Ansatz?

Edit: das Ganze scheint nur zu passieren bei Scripten, die via

                setState(k_t_l_id + luefter1_id.toString(), true);

den Status ändern. Wenn ich via GUI einen Switch bediene passiert das gefühlt nie.

arteck

@disaster123 sagte in ZigBee neue Version 1.6.0:

            setState(k_t_l_id + luefter1_id.toString(), true);

was steht den dann hinter

k_t_l_id + luefter1_id.toString()

nach konkatienierung ?

disaster123

@arteck ganz normal die ID. War nur nen Beispiel - damit kann es nichts zu tun haben. Ich kann auch hardcodiert den Befehl schicken mit:

    setState("zigbee.0.00124b0022612054.brightness", new_val, false);

dort tritt es auch auf.

disaster123

Ich kann es zuverlässig simulieren in dem ich zum Beispiel 6x setState direkt hintereinander absetze dann kommen Timeouts.

Asgothian

@disaster123 sagte in ZigBee neue Version 1.6.0:

Ich kann es zuverlässig simulieren in dem ich zum Beispiel 6x setState direkt hintereinander absetze dann kommen Timeouts.

Du solltest versuchen sicherzustellen das zwischen 2 befehlen 50-100 ms vergehen. Je mehr Befehle kurzfristig abgesetzt werden desto eher passiert es das ein Befehl “untergeht”. Die Fehlermeldung besagt explizit das ein Gerät eine Meldung nicht in der dafür vorgesehenen Zeit beantwortet hat.

A.

NEWS

ZigBee neue Version 1.6.x

Support us

1.5k
Online

30.5k
Users

76.8k
Topics

1.2m
Posts

NEWS

ZigBee neue Version 1.6.x

Support us

1.5kOnline

30.5kUsers

76.8kTopics

1.2mPosts

1.5k
Online

30.5k
Users

76.8k
Topics

1.2m
Posts