Gosund SP1 auf Tasmota - Keine Aktualisierung
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 stell deinen mqtt port um und schalte die Instanz aus. Stoppe deine sonoff Instanz und lösche deine Steckdose aus den Objekten und starte danach die Instanz wieder. Dann sollte alles richtig angezeigt werden
Wenn ich das mache muss ich die 10 Dosen ändern und die Geräte die noch nicht verbaut sind.. oder?
Macht für mich keinen wirklichen Sinn? ehr Frage ich mich ob ich die Dosen zurück zu Tuya bekomme :-)@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885umgestiegen von Proxmox auf Unraid
-
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885hat nicht mqtt Adapter default 1883 ?
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
5 Minis und 2 Shelly1 die alle schon Eingerichte sind und wie die anderen auch auf Port 1883
???? ich glaub bei dir passt mal gar nix zusammen
Naja... seit zwei Jahren kein Probleme mit dem Port 1883 :-)
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
-
@Ralla66 wenn sonoff frisch geflasht wird, ist 1883 voreingestellt
umgestiegen von Proxmox auf Unraid
-
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 nochmal von vorne
welche Adapter hast du im gebrauch?
welche Geräte mit welcher Software?
shelly, wenn über mqtt Port 1882
sonoff hat Standard den port 1883
Mqtt hat Standard 1885und @Ralla66 Ralla66.... ja genau Default 1883 Sonoff.... diesen Bescheuerten "mqtt-client" Adapert hatte ich mal vor einem Jahr installiert, bitte Fragt nicht warum ich weiß es auch nicht mehr so genau, aber was ich mir damals davon erhofft hatte klappte nicht und deshalb war er deaktiviert.
Ich glaube ich hatte den jetzt wieder kurz Aktiviert weil die Daten sich nicht geändert hatten... und sicher, dafür kenne ich mich zu gut hatte ich dann da den Port von 1885 auf 1883 geändert... was ja auch nicht Hilft, darum habe ich den mqtt Adapter auch wieder "deaktiviert"....
-
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
Wir verrennen uns jetzt, es geht nur um die 3 Gosund die nicht die Werte Aktualisieren und dort läuft Defaltu Sonoff mqtt mit Port 1883 drauf :-)
Gruß Master67
-
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
zwei Jahren kein Probleme mit dem Port 1883
dann ist doch gut, wenn du alles mit sonoff laufen hast, musst du nach dem flashen, dein Gerät aufrufen, deine host ip und Port 1883 angegeben,fertig. Deinen mqtt Adapter stellst auf 1885 und gut is
Wir verrennen uns jetzt, es geht nur um die 3 Gosund die nicht die Werte Aktualisieren und dort läuft Defaltu Sonoff mqtt mit Port 1883 drauf :-)
-
@Ralla66 hast recht, ist schon lange her
, hatte damals meinen sonoff auf 1885 eingerichtetMQTT Port - Port where the server will run (Default 1883). WebSockets will always run on port+1 (Default 1884) -
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Dann schau in der Tasmota Console nach ob Mqtt überhaupt sendet.Okay.... was muss ich Eingeben um das zu sehen?
-
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"APGruß Master67
-
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"AP@Master67 hier mal eine geflashte SWA1... Läuft schon sehr lange so :-)
t":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:03","Local":"2020-09-14T21:39:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:03"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:03","Uptime":"13T06:28:34","UptimeSec":1146514,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-48,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@XX.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:19","Local":"2020-09-14T21:39:19","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:19"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:19","Uptime":"13T06:28:50","UptimeSec":1146530,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS = {"Status":{"Module":18,"DeviceName":"Sonoff-Lampe Büro","FriendlyName":["Sonoff-Lampe Büro"],"Topic":"Sonoff-Lampe_Büro","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"13T06:28:58","StartupUTC":"2020-09-01T14:10:29","Sleep":50,"CfgHolder":4617,"BootCount":9,"BCResetTime":"2020-08-23T10:59:38","SaveCount":122,"SaveAddress":"FA000"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"508/699"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:27","Local":"2020-09-14T21:39:27","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:27"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:27","Uptime":"13T06:28:58","UptimeSec":1146538,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}} -
@Ralla66 sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67
Auf einen Tasmota SP1 gehen, im Hauptmenue Konsole anklicken...... :-) ja das war mir klar.... aber bei mir sieht das für den SP1 so aus (ich schau mir gleich noch die "echten" Sonoffs an)
21:30:07 MQT: stat/%topic%/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:30:07 MQT: stat/%topic%/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:30:07 MQT: stat/%topic%/STATUS5 = {"StatusNET":{"Hostname":"%topic%-0076","IPAddress":"192.168.178.XX","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"F4:CF:A2:08:E0:4C","Webserver":2,"WifiConfig":2,"WifiPower":17.0}} 21:30:07 MQT: stat/%topic%/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-HomeLab","MqttClient":"Sonoff-HomeLab","MqttUser":"olaf.himmelberg@XXX.com","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:30:07 MQT: stat/%topic%/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:30:07","Local":"2020-09-14T21:30:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:30:07 MQT: stat/%topic%/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} 21:30:07 MQT: stat/%topic%/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:30:07","ENERGY":{"TotalStartTime":"2020-09-10T13:07:47","Total":56.608,"Yesterday":13.314,"Today":11.922,"Period":1,"Power":532,"ApparentPower":594,"ReactivePower":263,"Factor":0.90,"Voltage":226,"Current":2.630}}} 21:30:07 MQT: stat/%topic%/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:30:07","Uptime":"3T05:13:48","UptimeSec":278028,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":2,"POWER":"ON","Wifi":{"AP@Master67 und du hast immer noch TelePeriod 0
-
@Master67 hier mal eine geflashte SWA1... Läuft schon sehr lange so :-)
t":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:03","Local":"2020-09-14T21:39:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:03"}} 21:39:03 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:03","Uptime":"13T06:28:34","UptimeSec":1146514,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-48,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@XX.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:19","Local":"2020-09-14T21:39:19","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:19"}} 21:39:19 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:19","Uptime":"13T06:28:50","UptimeSec":1146530,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS = {"Status":{"Module":18,"DeviceName":"Sonoff-Lampe Büro","FriendlyName":["Sonoff-Lampe Büro"],"Topic":"Sonoff-Lampe_Büro","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"13T06:28:58","StartupUTC":"2020-09-01T14:10:29","Sleep":50,"CfgHolder":4617,"BootCount":9,"BCResetTime":"2020-08-23T10:59:38","SaveCount":122,"SaveAddress":"FA000"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"508/699"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box 6490 Cable","FRITZ!Box 6591 Cable MF"],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1440A1","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS5 = {"StatusNET":{"Hostname":"Sonoff-Lampe Büro","IPAddress":"192.168.178.27","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.XX","Mac":"DC:4F:22:24:AA:1F","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.XX","MqttPort":1883,"MqttClientMask":"Sonoff-Lampe Büro","MqttClient":"Sonoff-Lampe Büro","MqttUser":"olaf.himmelberg@me.com","MqttCount":42,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:39:27","Local":"2020-09-14T21:39:27","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:39:27"}} 21:39:27 MQT: Sonoff-LampeBüro/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:39:27","Uptime":"13T06:28:58","UptimeSec":1146538,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":42,"POWER":"ON","Wifi":{"AP":2,"SSId":"FRITZ!Box 6591 Cable MF","BSSId":"3C:A6:2F:34:6C:41","Channel":11,"RSSI":100,"Signal":-49,"LinkCount":17,"Downtime":"0T00:01:05"}}}@Master67 ..... und hier mal die von mir zurückgesetzte SP1... aber das, selbst mit dem "Finger Weg" Teil sieht nicht anders aus!
21:44:47 MQT: stat/tasmota_D03663/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:44:47","ENERGY":{"TotalStartTime":"2020-09-11T15:00:47","Total":0.496,"Yesterday":0.016,"Today":0.015,"Power":1,"ApparentPower":3,"ReactivePower":3,"Factor":0.24,"Voltage":230,"Current":0.011}}} 21:44:47 MQT: stat/tasmota_D03663/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:44:47","Uptime":"3T04:31:43","UptimeSec":275503,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Fon WLAN 7360 SL","BSSId":"9C:C7:A6:63:34:50","Channel":13,"RSSI":54,"Signal":-73,"LinkCount":1,"Downtime":"0T00:00:03"}}} 21:44:55 MQT: stat/tasmota_D03663/STATUS = {"Status":{"Module":55,"DeviceName":"Sonoff-Kino","FriendlyName":["Sonoff-Kino"],"Topic":"tasmota_D03663","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Power On","Uptime":"3T04:31:51","StartupUTC":"2020-09-11T16:13:04","Sleep":50,"CfgHolder":4617,"BootCount":21,"BCResetTime":"2020-09-11T15:00:47","SaveCount":60,"SaveAddress":"F8000"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"476/699"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:44:55 MQT: stat/tasmota_D03663/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS5 = {"StatusNET":{"Hostname":"tasmota_D03663-5731","IPAddress":"192.168.178.xx","Gateway":"192.168.178.xx","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"DC:4F:22:D0:36:63","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Kino","MqttClient":"Sonoff-Kino","MqttUser":"olaf.himmelberg@xx.com","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:44:55 MQT: stat/tasmota_D03663/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:44:55","Local":"2020-09-14T21:44:55","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} -
@crunchip sagte in Gosund SP1 auf Tasmota - Keine Aktualisierung:
@Master67 und du hast immer noch TelePeriod 0
Ja.... ich kann es auch direkt umstelle... soll ich 10 oder 300 versuchen, bei der SWA1 (die läuft) ist es 300!
@Master67 zur Verbrauchsmessung brauchste schon 10....5min is sinnfrei
-
@Master67 ..... und hier mal die von mir zurückgesetzte SP1... aber das, selbst mit dem "Finger Weg" Teil sieht nicht anders aus!
21:44:47 MQT: stat/tasmota_D03663/STATUS10 = {"StatusSNS":{"Time":"2020-09-14T21:44:47","ENERGY":{"TotalStartTime":"2020-09-11T15:00:47","Total":0.496,"Yesterday":0.016,"Today":0.015,"Power":1,"ApparentPower":3,"ReactivePower":3,"Factor":0.24,"Voltage":230,"Current":0.011}}} 21:44:47 MQT: stat/tasmota_D03663/STATUS11 = {"StatusSTS":{"Time":"2020-09-14T21:44:47","Uptime":"3T04:31:43","UptimeSec":275503,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Fon WLAN 7360 SL","BSSId":"9C:C7:A6:63:34:50","Channel":13,"RSSI":54,"Signal":-73,"LinkCount":1,"Downtime":"0T00:00:03"}}} 21:44:55 MQT: stat/tasmota_D03663/STATUS = {"Status":{"Module":55,"DeviceName":"Sonoff-Kino","FriendlyName":["Sonoff-Kino"],"Topic":"tasmota_D03663","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Power On","Uptime":"3T04:31:51","StartupUTC":"2020-09-11T16:13:04","Sleep":50,"CfgHolder":4617,"BootCount":21,"BCResetTime":"2020-09-11T15:00:47","SaveCount":60,"SaveAddress":"F8000"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS2 = {"StatusFWR":{"Version":"8.4.0(tasmota)","BuildDateTime":"2020.07.29 12:19:21","Boot":31,"Core":"2_7_2_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"476/699"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["FRITZ!Box Fon WLAN 7360 SL","FRITZ!Box 6591 Cable MF"],"TelePeriod":0,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000"]}} 21:44:55 MQT: stat/tasmota_D03663/STATUS4 = {"StatusMEM":{"ProgramSize":593,"Free":408,"Heap":21,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS5 = {"StatusNET":{"Hostname":"tasmota_D03663-5731","IPAddress":"192.168.178.xx","Gateway":"192.168.178.xx","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.xx","Mac":"DC:4F:22:D0:36:63","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 21:44:55 MQT: stat/tasmota_D03663/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.178.31","MqttPort":1883,"MqttClientMask":"Sonoff-Kino","MqttClient":"Sonoff-Kino","MqttUser":"olaf.himmelberg@xx.com","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 21:44:55 MQT: stat/tasmota_D03663/STATUS7 = {"StatusTIM":{"UTC":"2020-09-14T20:44:55","Local":"2020-09-14T21:44:55","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:26","Sunset":"19:04"}} 21:44:55 MQT: stat/tasmota_D03663/STATUS9 = {"StatusPTH":{"PowerDelta":0,"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}} -
@Master67
du bekommst Status und keine Tele Daten.
Da haste was verbogen.
Geh kurz im Sonoff Adapter auf Port 1885 PW anpassen usw.
Gleiche in Tasmota.
Tele setze 10.
Dann Sonoff Adapter neu starten, dann müssen Tele Daten da sein.@Ralla66 .. @crunchip ..... erst mal Danke für euren Einsatz.... ich glaube ich dreh am Rad.... ich hab das wieder auf TelePeriod 10 gestellt (ich musste es nicht mal eintippen.. war noch in der Konsole gespeichert), bin dann (so wie beim erste mal auch) in die Objekte rein und konnte den Aktualisierungen zuschauen!
Also es läuft..... aber ehrlich ich weis nicht warum.... ich kann schon die "Aktualisierungen" erkennen weil "Grün".... aber das war vor zwei Tagen nicht so.... Puh.... was für ein Stress wegen eigentlich nichts.
Aber danke an euch, das ihr da nicht nachgelassen habt
Also setzten wir das mal auf gelöst...
Gruß Master67
-
@Ralla66 .. @crunchip ..... erst mal Danke für euren Einsatz.... ich glaube ich dreh am Rad.... ich hab das wieder auf TelePeriod 10 gestellt (ich musste es nicht mal eintippen.. war noch in der Konsole gespeichert), bin dann (so wie beim erste mal auch) in die Objekte rein und konnte den Aktualisierungen zuschauen!
Also es läuft..... aber ehrlich ich weis nicht warum.... ich kann schon die "Aktualisierungen" erkennen weil "Grün".... aber das war vor zwei Tagen nicht so.... Puh.... was für ein Stress wegen eigentlich nichts.
Aber danke an euch, das ihr da nicht nachgelassen habt
Also setzten wir das mal auf gelöst...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginSupport us
564
Online32.8k
Users82.7k
Topics1.3m
Posts