NEWS
iobroker Multihost lässt sich nicht umschalten
-
@Homoran said in iobroker Multihost lässt sich nicht umschalten:
Ist das vollständig wieder zurückgestellt?
ja
pi@ioBroker-Pi:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 192.168.109.46 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 192.168.109.46 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(f)ile, (r)edis], default [file]: Host / Unix Socket of objects DB(file), default[192.168.109.46]: Port of objects DB(file), default[9001]: Type of states DB [(f)file, (r)edis], default [file]: Host / Unix Socket of states DB (file), default[192.168.109.46]: Port of states DB (file), default[9000]: Host name of this machine [ioBroker-Pi]: updating conf/iobroker.json
-
@Homoran said in iobroker Multihost lässt sich nicht umschalten:
oder geht das per Hostname?
Haben beide Pi einen unterschiedlichen Hostnamen?geht nicht per hostname.
Und beide Installaationen haben unterschiedliche Hostnamen
Master: M27iob und Slave ioBroker-Pi
-
@hartwigm sagte in iobroker Multihost lässt sich nicht umschalten:
192.168.109.46
ist das die IP vom Slave?
-
ja
-
@hartwigm Dann bin ich mit meinem Latein am Ende.
rebootet hast du ja wohl schon mal, oder? -
Korrektur: .46 ist der Master .62 ist der Slave
Alles im gleichen LAN.
Lediglich mein Zugriff verfolgt aus dem eine anderen Netz per VPN
-
@hartwigm sagte in iobroker Multihost lässt sich nicht umschalten:
Korrektur: .46 ist der Master .62 ist der Slave
Nee, nich?
also ÄNDERN!
-
Die IP hatte ich übersehen. Nun auch .62 umgestellt.
Aber immer noch kein Zugriff
Type of objects DB [(f)ile, (r)edis], default [file]: Host / Unix Socket of objects DB(file), default[192.168.109.46]: 192.168.109.62 Port of objects DB(file), default[9001]: Type of states DB [(f)file, (r)edis], default [file]: Host / Unix Socket of states DB (file), default[192.168.109.62]: Port of states DB (file), default[9000]: Host name of this machine [ioBroker-Pi]: updating conf/iobroker.json pi@ioBroker-Pi:/opt/iobroker $ iobroker restart pi@ioBroker-Pi:/opt/iobroker $ ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.109.62 netmask 255.255.255.0 broadcast 192.168.109.255 inet6 fe80::6cac:d167:253e:3454 prefixlen 64 scopeid 0x20<link> ether b8:27:eb:19:83:a1 txqueuelen 1000 (Ethernet) RX packets 10056 bytes 12470973 (11.8 MiB) RX errors 0 dropped 466 overruns 0 frame 0 TX packets 5512 bytes 466200 (455.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Lokale Schleife) RX packets 192 bytes 9600 (9.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 192 bytes 9600 (9.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether b8:27:eb:4c:d6:f4 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 pi@ioBroker-Pi:/opt/iobroker $ iobroker list instances system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.discovery.0 : discovery - enabled system.adapter.info.0 : info - enabled system.adapter.mqtt-client.0 : mqtt-client - enabled, port: 1883 system.adapter.shelly.0 : shelly - enabled, port: 1882, bind: 0.0.0.0 system.adapter.terminal.0 : terminal - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E210F6-if00 system.adapter.zwave.0 : zwave - enabled system.adapter.zwave2.0 : zwave2 - enabled + instance is alive pi@ioBroker-Pi:/opt/iobroker $ iobroker restart pi@ioBroker-Pi:/opt/iobroker $
-
Es sieht für mich so aus, als würde sich der Admin.Adapter nicht registieren.
Jedenfalls sehe ich nicht dass der Port 8081 oder 8089 auf listen steht.
pi@ioBroker-Pi:/opt/iobroker $ netstat -n -a -p TCP (Es konnten nicht alle Prozesse identifiziert werden; Informationen über nicht-eigene Processe werden nicht angezeigt; Root kann sie anzeigen.) Aktive Internetverbindungen (Server und stehende Verbindungen) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 192.168.109.62:9001 192.168.109.62:34772 TIME_WAIT - tcp 0 560 192.168.109.62:22 192.168.133.70:53068 VERBUNDEN - tcp 0 0 192.168.109.62:9000 192.168.109.62:58124 TIME_WAIT - tcp 0 0 192.168.109.62:9001 192.168.109.62:34774 TIME_WAIT - tcp 0 0 192.168.109.62:9000 192.168.109.62:58122 TIME_WAIT - tcp6 0 0 :::22 :::* LISTEN - udp 0 0 0.0.0.0:5353 0.0.0.0:* - udp 0 0 0.0.0.0:33260 0.0.0.0:* - udp 0 0 0.0.0.0:68 0.0.0.0:* - udp6 0 0 :::5353 :::* - udp6 0 0 :::47394 :::* - raw6 0 0 :::58 :::* 7 -
Noch eine Idee?
Jedenfalls schon mal vielen Dank für Eure Hilfe.
Ich werde noch einen separten Thread aufmachen, wie eine defekte Installation zu überschreiben ist.
-