Test Adapter HeatingControl v2.12.x

[Rene_HM]

@moppel2810 sagte in Test Adapter HeatingControl v0.3.x:

Ich verzweifel hier bald bei der Suche

Das bekommen wir schon hin...
Zuerst müssen wir das hier beseitigen:

exception in main [invalid id ""]

Ich denke, du hast irgendeinen Aktor falsch konfiguriert. Erste Frage: benötigst du überhaupt Aktoren? Aktoren sind eigentlich ein Sonderfall hier... Wenn nicht, dann schalte UseActors im admin aus...

[Rene_HM]

@martinschm sagte in Test Adapter HeatingControl v0.3.x:

ist evtl untergegangen

nein, das habe ich noch auf dem Schirm. Ich verstehe hier leider nur noch nicht, was hier schief läuft. Da bin ich noch am suchen...
Welche Version vom adapter läuft eigentlich bei dir?

[moppel2810]

@Rene_HM so jetzt sieht der debug nach Neustart so aus.

heatingcontrol.0	2019-12-31 11:19:45.513	debug	(4204) #subscribtion finished
heatingcontrol.0	2019-12-31 11:19:45.513	info	(4204) subscribe Küche deconz.0.Sensors.24.open
heatingcontrol.0	2019-12-31 11:19:45.512	info	(4204) subscribe Küche hm-rpc.1.0007D5699E9605.1.STATE
heatingcontrol.0	2019-12-31 11:19:45.512	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.21.open
heatingcontrol.0	2019-12-31 11:19:45.511	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.20.open
heatingcontrol.0	2019-12-31 11:19:45.511	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.19.open
heatingcontrol.0	2019-12-31 11:19:45.510	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.18.open
heatingcontrol.0	2019-12-31 11:19:45.510	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.17.open
heatingcontrol.0	2019-12-31 11:19:45.509	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.16.open
heatingcontrol.0	2019-12-31 11:19:45.509	info	(4204) subscribe Wohnzimmer deconz.0.Sensors.15.open
heatingcontrol.0	2019-12-31 11:19:45.508	info	(4204) subscribe Badezimmer hm-rpc.1.0000D56996187D.1.STATE
heatingcontrol.0	2019-12-31 11:19:45.507	info	(4204) subscribe Arbeitszimmer deconz.0.Sensors.23.open
heatingcontrol.0	2019-12-31 11:19:45.507	info	(4204) subscribe Arbeitszimmer deconz.0.Sensors.11.open
heatingcontrol.0	2019-12-31 11:19:45.507	debug	(4204) device not active
heatingcontrol.0	2019-12-31 11:19:45.506	debug	(4204) no subscribe Path2PartyNowDP
heatingcontrol.0	2019-12-31 11:19:45.506	debug	(4204) no subscribe Path2GuestsPresentDP
heatingcontrol.0	2019-12-31 11:19:45.506	debug	(4204) no subscribe Path2HolidayPresentDP
heatingcontrol.0	2019-12-31 11:19:45.506	debug	(4204) no subscribe Path2VacationDP
heatingcontrol.0	2019-12-31 11:19:45.506	info	(4204) subscribe javascript.0.scriptEnabled.Anwesenheit.An_Abwesenheit
heatingcontrol.0	2019-12-31 11:19:45.505	info	(4204) subscribe feiertage.0.heute.boolean
heatingcontrol.0	2019-12-31 11:19:45.498	debug	(4204) #start subscribtion
heatingcontrol.0	2019-12-31 11:19:45.497	debug	(4204) [INFO] status = true next event: 4 Jan 2020 20:00:00
heatingcontrol.0	2019-12-31 11:19:45.477	debug	(4204) [INFO] status = true next event: 4 Jan 2020 15:00:00
heatingcontrol.0	2019-12-31 11:19:45.476	debug	(4204) [INFO] status = true next event: 4 Jan 2020 11:00:00
heatingcontrol.0	2019-12-31 11:19:45.475	debug	(4204) [INFO] status = true next event: 4 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 11:19:45.472	debug	(4204) [INFO] status = true next event: 4 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 11:19:45.470	debug	(4204) [INFO] status = true next event: 31 Dec 2019 20:00:00
heatingcontrol.0	2019-12-31 11:19:45.469	debug	(4204) [INFO] status = true next event: 31 Dec 2019 15:00:00
heatingcontrol.0	2019-12-31 11:19:45.469	debug	(4204) [INFO] status = true next event: 31 Dec 2019 11:00:00
heatingcontrol.0	2019-12-31 11:19:45.468	debug	(4204) [INFO] status = true next event: 1 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 11:19:45.465	debug	(4204) [INFO] status = true next event: 1 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 11:19:45.448	debug	(4204) thermostat hm-rpc.1.000A97099C1E52.1.SET_POINT_TEMPERATURE nothing to do, already 21
heatingcontrol.0	2019-12-31 11:19:45.440	info	(4204) room Wohnzimmer Thermostat Fußbodenheizung Wohnzimmer.SET_POINT_TEMPERATURE target is 21
heatingcontrol.0	2019-12-31 11:19:45.440	debug	(4204) ### new target temp21
heatingcontrol.0	2019-12-31 11:19:45.440	debug	(4204) ### current > 1 1 2
heatingcontrol.0	2019-12-31 11:19:45.439	debug	(4204) Wohnzimmer found period 1 with 21 on 08,00
heatingcontrol.0	2019-12-31 11:19:45.437	debug	(4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.4.time
heatingcontrol.0	2019-12-31 11:19:45.432	debug	(4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.3.time
heatingcontrol.0	2019-12-31 11:19:45.427	debug	(4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.2.time
heatingcontrol.0	2019-12-31 11:19:45.427	debug	(4204) check time for Wohnzimmer Profiles.0.Wohnzimmer.Sa-So.Periods.1.time 21
heatingcontrol.0	2019-12-31 11:19:45.421	debug	(4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.1.time
heatingcontrol.0	2019-12-31 11:19:45.421	debug	(4204) check time for Wohnzimmer Profiles.0.Wohnzimmer.Sa-So.Periods.0.time 17
heatingcontrol.0	2019-12-31 11:19:45.417	debug	(4204) check ID Profiles.0.Wohnzimmer.Sa-So.Periods.0.time
heatingcontrol.0	2019-12-31 11:19:45.416	debug	(4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Wohnzimmer
heatingcontrol.0	2019-12-31 11:19:45.415	debug	(4204) check room Wohnzimmer
heatingcontrol.0	2019-12-31 11:19:45.363	debug	(4204) thermostat hm-rpc.1.000A17098D4CEA.1.SET_POINT_TEMPERATURE nothing to do, already 21
heatingcontrol.0	2019-12-31 11:19:45.359	info	(4204) room Küche Thermostat Heizung Küche.SET_POINT_TEMPERATURE target is 21
heatingcontrol.0	2019-12-31 11:19:45.358	debug	(4204) ### new target temp21
heatingcontrol.0	2019-12-31 11:19:45.358	debug	(4204) ### current > 1 1 2
heatingcontrol.0	2019-12-31 11:19:45.358	debug	(4204) Küche found period 1 with 21 on 08,00
heatingcontrol.0	2019-12-31 11:19:45.356	debug	(4204) check ID Profiles.0.Küche.Sa-So.Periods.4.time
heatingcontrol.0	2019-12-31 11:19:45.355	debug	(4204) check ID Profiles.0.Küche.Sa-So.Periods.3.time
heatingcontrol.0	2019-12-31 11:19:45.352	debug	(4204) check ID Profiles.0.Küche.Sa-So.Periods.2.time
heatingcontrol.0	2019-12-31 11:19:45.352	debug	(4204) check time for Küche Profiles.0.Küche.Sa-So.Periods.1.time 21
heatingcontrol.0	2019-12-31 11:19:45.340	debug	(4204) check ID Profiles.0.Küche.Sa-So.Periods.1.time
heatingcontrol.0	2019-12-31 11:19:45.340	debug	(4204) check time for Küche Profiles.0.Küche.Sa-So.Periods.0.time 17
heatingcontrol.0	2019-12-31 11:19:45.335	debug	(4204) check ID Profiles.0.Küche.Sa-So.Periods.0.time
heatingcontrol.0	2019-12-31 11:19:45.335	debug	(4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Küche
heatingcontrol.0	2019-12-31 11:19:45.334	debug	(4204) check room Küche
heatingcontrol.0	2019-12-31 10:19:45.287	debug	2
heatingcontrol.0	2019-12-31 10:19:45.287	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.4.time
heatingcontrol.0	2019-12-31 10:19:45.283	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.3.time
heatingcontrol.0	2019-12-31 10:19:45.281	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.2.time
heatingcontrol.0	2019-12-31 10:19:45.280	debug	(4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time 21
heatingcontrol.0	2019-12-31 10:19:45.278	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time
heatingcontrol.0	2019-12-31 10:19:45.276	debug	(4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time 17
heatingcontrol.0	2019-12-31 10:19:45.269	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time
heatingcontrol.0	2019-12-31 10:19:45.269	debug	(4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Arbeitszimmer
heatingcontrol.0	2019-12-31 10:19:45.262	debug	(4204) check room Arbeitszimmer
heatingcontrol.0	2019-12-31 10:19:45.262	debug	(4204) profile 0
heatingcontrol.0	2019-12-31 10:19:45.260	debug	(4204) get profile
heatingcontrol.0	2019-12-31 10:19:45.260	debug	(4204) profile type 2
heatingcontrol.0	2019-12-31 10:19:45.252	info	(4204) calculating new target temperatures
heatingcontrol.0	2019-12-31 10:19:45.251	info	(4204) external states checked, done
heatingcontrol.0	2019-12-31 10:19:45.249	debug	(4204) checking Path2HolidayPresentDP
heatingcontrol.0	2019-12-31 10:19:45.248	debug	(4204) checking Path2PartyNowDP
heatingcontrol.0	2019-12-31 10:19:45.245	debug	(4204) checking Path2GuestsPresentDP
heatingcontrol.0	2019-12-31 10:19:45.244	debug	(4204) checking Path2VacationDP
heatingcontrol.0	2019-12-31 10:19:45.240	info	(4204) setting Present to true
heatingcontrol.0	2019-12-31 10:19:45.239	debug	(4204) got Present (1) {"val":true,"ack":true,"ts":1577726419908,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577726419858}
heatingcontrol.0	2019-12-31 10:19:45.237	debug	(4204) checking Path2PresentDP
heatingcontrol.0	2019-12-31 10:19:45.232	info	(4204) setting PublicHolidyToday to true
heatingcontrol.0	2019-12-31 10:19:45.229	debug	(4204) checking Path2FeiertagAdapter
heatingcontrol.0	2019-12-31 10:19:45.228	info	(4204) checking all external states
heatingcontrol.0	2019-12-31 10:19:45.223	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933362844} from deconz.0.Sensors.21.open
heatingcontrol.0	2019-12-31 10:19:45.220	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577638441163} from deconz.0.Sensors.20.open
heatingcontrol.0	2019-12-31 10:19:45.217	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933207327} from deconz.0.Sensors.19.open
heatingcontrol.0	2019-12-31 10:19:45.210	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574987,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933122635} from deconz.0.Sensors.18.open
heatingcontrol.0	2019-12-31 10:19:45.209	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933025797} from deconz.0.Sensors.17.open
heatingcontrol.0	2019-12-31 10:19:45.205	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576932905933} from deconz.0.Sensors.16.open
heatingcontrol.0	2019-12-31 10:19:45.203	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577007719646} from deconz.0.Sensors.15.open
heatingcontrol.0	2019-12-31 10:19:45.201	debug	(4204) Check sensors for Wohnzimmer
heatingcontrol.0	2019-12-31 10:19:45.196	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577644284922} from deconz.0.Sensors.24.open
heatingcontrol.0	2019-12-31 10:19:45.195	debug	(4204) got sensor state {"val":0,"ack":true,"ts":1577786742689,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577786742689} from hm-rpc.1.0007D5699E9605.1.STATE
heatingcontrol.0	2019-12-31 10:19:45.192	debug	(4204) Check sensors for Küche
heatingcontrol.0	2019-12-31 10:19:45.186	debug	(4204) got sensor state {"val":0,"ack":true,"ts":1577785259127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577628013202} from hm-rpc.1.0000D56996187D.1.STATE
heatingcontrol.0	2019-12-31 10:19:45.184	debug	(4204) Check sensors for Badezimmer
heatingcontrol.0	2019-12-31 10:19:45.179	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577705276875} from deconz.0.Sensors.23.open
heatingcontrol.0	2019-12-31 10:19:45.176	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576925832752} from deconz.0.Sensors.11.open
heatingcontrol.0	2019-12-31 10:19:45.157	debug	(4204) Check sensors for Arbeitszimmer
heatingcontrol.0	2019-12-31 10:19:45.156	debug	(4204) [INFO] status = true next event: 4 Jan 2020 20:00:00
heatingcontrol.0	2019-12-31 10:19:45.155	debug	(4204) [INFO] status = true next event: 4 Jan 2020 15:00:00
heatingcontrol.0	2019-12-31 10:19:45.154	debug	(4204) [INFO] status = true next event: 4 Jan 2020 11:00:00
heatingcontrol.0	2019-12-31 10:19:45.153	debug	(4204) [INFO] status = true next event: 4 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 10:19:45.152	debug	(4204) [INFO] status = true next event: 4 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 10:19:45.151	debug	(4204) [INFO] status = true next event: 31 Dec 2019 20:00:00
heatingcontrol.0	2019-12-31 10:19:45.151	debug	(4204) [INFO] status = true next event: 31 Dec 2019 15:00:00
heatingcontrol.0	2019-12-31 10:19:45.150	debug	(4204) [INFO] status = true next event: 31 Dec 2019 11:00:00
heatingcontrol.0	2019-12-31 10:19:45.150	debug	(4204) [INFO] status = true next event: 1 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 10:19:45.147	debug	(4204) [INFO] status = true next event: 1 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 10:19:45.134	debug	(4204) create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.132	debug	(4204) create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.129	debug	(4204) create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.127	debug	(4204) create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.120	debug	(4204) create cron job #5 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.117	debug	(4204) create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.115	debug	(4204) create cron job #3 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.110	debug	(4204) create cron job #2 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.099	debug	(4204) create cron job #1 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.078	debug	(4204) create cron job #0 at 5:0 string: 0 0 5 * * 1-5 Europe/Berlin
heatingcontrol.0	2019-12-31 10:19:45.078	debug	(4204) ---2 found time for Wohnzimmer at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00
heatingcontrol.0	2019-12-31 10:19:45.075	debug	(4204) ---2 found time for Wohnzimmer at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00
heatingcontrol.0	2019-12-31 10:19:45.072	debug	(4204) ---2 found time for Wohnzimmer at {"val":"12:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 12:00
heatingcontrol.0	2019-12-31 10:19:45.070	debug	(4204) ---2 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 08:00
heatingcontrol.0	2019-12-31 10:19:45.067	debug	(4204) ---2 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 05:00
heatingcontrol.0	2019-12-31 10:19:45.062	debug	(4204) setting Sa - Su
heatingcontrol.0	2019-12-31 10:19:45.062	debug	(4204) ---1 found time for Wohnzimmer at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00
heatingcontrol.0	2019-12-31 10:19:45.060	debug	(4204) ---1 found time for Wohnzimmer at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00
heatingcontrol.0	2019-12-31 10:19:45.059	debug	(4204) ---1 found time for Wohnzimmer at {"val":"12:00","ack":false,"ts":1577542409214,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1577542409214} 12:00
heatingcontrol.0	2019-12-31 10:19:45.057	debug	(4204) ---1 found time for Wohnzimmer at {"val":"08:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 08:00
heatingcontrol.0	2019-12-31 10:19:45.055	debug	(4204) ---1 found time for Wohnzimmer at {"val":"05:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 05:00
heatingcontrol.0	2019-12-31 10:19:45.052	debug	(4204) setting Mo - Fr
heatingcontrol.0	2019-12-31 10:19:45.051	debug	(4204) ---2 found time for Küche at {"val":"21:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 21:00
heatingcontrol.0	2019-12-31 10:19:45.049	debug	(4204) ---2 found time for Küche at {"val":"16:00","ack":true,"ts":1577378276535,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276535} 16:00
heatingcontrol.0	2019-12-31 10:19:45.047	debug	(4204) ---2 found time for Küche at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:45.036	debug	(4204) ---2 found time for Küche at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:45.031	debug	(4204) ---2 found time for Küche at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:45.028	debug	(4204) setting Sa - Su
heatingcontrol.0	2019-12-31 10:19:45.028	debug	(4204) ---1 found time for Küche at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00
heatingcontrol.0	2019-12-31 10:19:45.021	debug	(4204) ---1 found time for Küche at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00
heatingcontrol.0	2019-12-31 10:19:45.019	debug	(4204) ---1 found time for Küche at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:45.018	debug	(4204) ---1 found time for Küche at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:45.017	debug	(4204) ---1 found time for Küche at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:45.011	debug	(4204) setting Mo - Fr
heatingcontrol.0	2019-12-31 10:19:45.011	debug	(4204) ---2 found time for Badezimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00
heatingcontrol.0	2019-12-31 10:19:45.010	debug	(4204) ---2 found time for Badezimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00
heatingcontrol.0	2019-12-31 10:19:45.009	debug	(4204) ---2 found time for Badezimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:45.007	debug	(4204) ---2 found time for Badezimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:45.004	debug	(4204) ---2 found time for Badezimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:44.996	debug	(4204) setting Sa - Su
heatingcontrol.0	2019-12-31 10:19:44.996	debug	(4204) ---1 found time for Badezimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00
heatingcontrol.0	2019-12-31 10:19:44.993	debug	(4204) ---1 found time for Badezimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00
heatingcontrol.0	2019-12-31 10:19:44.988	debug	(4204) ---1 found time for Badezimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:44.987	debug	(4204) ---1 found time for Badezimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:44.986	debug	(4204) ---1 found time for Badezimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:44.985	debug	(4204) setting Mo - Fr
heatingcontrol.0	2019-12-31 10:19:44.985	debug	(4204) push to list = 21,00
heatingcontrol.0	2019-12-31 10:19:44.985	debug	(4204) ---2 found time for Arbeitszimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00
heatingcontrol.0	2019-12-31 10:19:44.983	debug	(4204) push to list = 16,00
heatingcontrol.0	2019-12-31 10:19:44.982	debug	(4204) ---2 found time for Arbeitszimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00
heatingcontrol.0	2019-12-31 10:19:44.974	debug	(4204) push to list = 12,00
heatingcontrol.0	2019-12-31 10:19:44.974	debug	(4204) ---2 found time for Arbeitszimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:44.963	debug	(4204) push to list = 08,00
heatingcontrol.0	2019-12-31 10:19:44.962	debug	(4204) ---2 found time for Arbeitszimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:44.943	debug	(4204) push to list = 05,00
heatingcontrol.0	2019-12-31 10:19:44.943	debug	(4204) ---2 found time for Arbeitszimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:44.942	debug	(4204) setting Sa - Su
heatingcontrol.0	2019-12-31 10:19:44.942	debug	(4204) push to list = 21,00
heatingcontrol.0	2019-12-31 10:19:44.942	debug	(4204) ---1 found time for Arbeitszimmer at {"val":"21:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 21:00
heatingcontrol.0	2019-12-31 10:19:44.941	debug	(4204) push to list = 16,00
heatingcontrol.0	2019-12-31 10:19:44.940	debug	(4204) ---1 found time for Arbeitszimmer at {"val":"16:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 16:00
heatingcontrol.0	2019-12-31 10:19:44.932	debug	(4204) push to list = 12,00
heatingcontrol.0	2019-12-31 10:19:44.931	debug	(4204) ---1 found time for Arbeitszimmer at {"val":"12:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 12:00
heatingcontrol.0	2019-12-31 10:19:44.930	debug	(4204) push to list = 08,00
heatingcontrol.0	2019-12-31 10:19:44.930	debug	(4204) ---1 found time for Arbeitszimmer at {"val":"08:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 08:00
heatingcontrol.0	2019-12-31 10:19:44.921	debug	(4204) push to list = 05,00
heatingcontrol.0	2019-12-31 10:19:44.920	debug	(4204) ---1 found time for Arbeitszimmer at {"val":"05:00","ack":true,"ts":1577378276534,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1577378276534} 05:00
heatingcontrol.0	2019-12-31 10:19:44.919	debug	(4204) setting Mo - Fr
heatingcontrol.0	2019-12-31 10:19:44.919	debug	(4204) profile 0
heatingcontrol.0	2019-12-31 10:19:44.909	debug	(4204) get profile
heatingcontrol.0	2019-12-31 10:19:44.909	debug	(4204) start CalculateNextTime, profile type 2
heatingcontrol.0	2019-12-31 10:19:44.908	debug	(4204) system date format DD.MM.YYYY
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) CreateDatepoints done
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) not active.... Kinderzimmer
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) not active.... Schlafzimmer
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.885	debug	(4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.884	debug	(4204) add state Profiles.0.Wohnzimmer.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.884	debug	(4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.884	debug	(4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.884	debug	(4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.884	debug	(4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.883	debug	(4204) add state Profiles.0.Wohnzimmer.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.883	debug	(4204) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-31 10:19:44.883	debug	(4204) room Wohnzimmer with 5 periods
heatingcontrol.0	2019-12-31 10:19:44.673	debug	(4204) create data profile points (absolute) for Wohnzimmer
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.670	debug	(4204) add state Profiles.0.Küche.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.669	debug	(4204) add state Profiles.0.Küche.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.667	debug	(4204) add state Profiles.0.Küche.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.667	debug	(4204) add state Profiles.0.Küche.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.665	debug	(4204) add state Profiles.0.Küche.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.665	debug	(4204) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-31 10:19:44.665	debug	(4204) room Küche with 5 periods
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) create data profile points (absolute) for Küche
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) add state Profiles.0.Badezimmer.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) add state Profiles.0.Badezimmer.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) add state Profiles.0.Badezimmer.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) add state Profiles.0.Badezimmer.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.475	debug	(4204) add state Profiles.0.Badezimmer.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) add state Profiles.0.Badezimmer.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.474	debug	(4204) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-31 10:19:44.473	debug	(4204) room Badezimmer with 5 periods
heatingcontrol.0	2019-12-31 10:19:44.332	debug	(4204) create data profile points (absolute) for Badezimmer
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Sa-So.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.4 max 5
heatingcontrol.0	2019-12-31 10:19:44.331	debug	(4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.3 max 5
heatingcontrol.0	2019-12-31 10:19:44.330	debug	(4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.2 max 5
heatingcontrol.0	2019-12-31 10:19:44.330	debug	(4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.1 max 5
heatingcontrol.0	2019-12-31 10:19:44.330	debug	(4204) add state Profiles.0.Arbeitszimmer.Mo-Fr.Periods.0 max 5
heatingcontrol.0	2019-12-31 10:19:44.330	debug	(4204) Profile Type Mo-FR + Sa-So, profiles 1
heatingcontrol.0	2019-12-31 10:19:44.329	debug	(4204) room Arbeitszimmer with 5 periods
heatingcontrol.0	2019-12-31 10:19:44.278	debug	(4204) create data profile points (absolute) for Arbeitszimmer
heatingcontrol.0	2019-12-31 10:19:44.278	debug	(4204) rooms 6
heatingcontrol.0	2019-12-31 10:19:44.263	debug	(4204) create data points for Wohnzimmer
heatingcontrol.0	2019-12-31 10:19:44.252	debug	(4204) create data points for Küche
heatingcontrol.0	2019-12-31 10:19:44.248	debug	(4204) create data points for Badezimmer
heatingcontrol.0	2019-12-31 10:19:44.226	debug	(4204) create data points for Arbeitszimmer
heatingcontrol.0	2019-12-31 10:19:43.903	debug	(4204) start CreateDatepoints
heatingcontrol.0	2019-12-31 11:19:45.322	debug	(4204) thermostat hm-rpc.1.000A17098D4EAA.1.SET_POINT_TEMPERATURE nothing to do, already 23
heatingcontrol.0	2019-12-31 11:19:45.321	info	(4204) room Badezimmer Thermostat Heizung Bad.SET_POINT_TEMPERATURE target is 23
heatingcontrol.0	2019-12-31 11:19:45.321	debug	(4204) thermostat hm-rpc.1.000A97099C1E2C.1.SET_POINT_TEMPERATURE nothing to do, already 23
heatingcontrol.0	2019-12-31 11:19:45.318	info	(4204) room Badezimmer Thermostat Fußbodenheizung Bad.SET_POINT_TEMPERATURE target is 23
heatingcontrol.0	2019-12-31 11:19:45.318	debug	(4204) ### new target temp23
heatingcontrol.0	2019-12-31 11:19:45.318	debug	(4204) ### current > 1 1 2
heatingcontrol.0	2019-12-31 11:19:45.318	debug	(4204) Badezimmer found period 1 with 23 on 08,00
heatingcontrol.0	2019-12-31 11:19:45.316	debug	(4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.4.time
heatingcontrol.0	2019-12-31 11:19:45.314	debug	(4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.3.time
heatingcontrol.0	2019-12-31 11:19:45.311	debug	(4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.2.time
heatingcontrol.0	2019-12-31 11:19:45.311	debug	(4204) check time for Badezimmer Profiles.0.Badezimmer.Sa-So.Periods.1.time 23
heatingcontrol.0	2019-12-31 11:19:45.310	debug	(4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.1.time
heatingcontrol.0	2019-12-31 11:19:45.310	debug	(4204) check time for Badezimmer Profiles.0.Badezimmer.Sa-So.Periods.0.time 19
heatingcontrol.0	2019-12-31 11:19:45.307	debug	(4204) check ID Profiles.0.Badezimmer.Sa-So.Periods.0.time
heatingcontrol.0	2019-12-31 11:19:45.307	debug	(4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Badezimmer
heatingcontrol.0	2019-12-31 11:19:45.306	debug	(4204) check room Badezimmer
heatingcontrol.0	2019-12-31 11:19:45.297	debug	(4204) thermostat hm-rpc.1.000A1709ACCE17.1.SET_POINT_TEMPERATURE nothing to do, already 21
heatingcontrol.0	2019-12-31 11:19:45.291	info	(4204) room Arbeitszimmer Thermostat Heizung Arbeitszimmer.SET_POINT_TEMPERATURE target is 21
heatingcontrol.0	2019-12-31 11:19:45.291	debug	(4204) ### new target temp21
heatingcontrol.0	2019-12-31 11:19:45.291	debug	(4204) ### current > 1 1 2
heatingcontrol.0	2019-12-31 11:19:45.289	debug	(4204) Arbeitszimmer found period 1 with 21 on 08,00
heatingcontrol.0	2019-12-31 11:19:45.287	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.4.time
heatingcontrol.0	2019-12-31 11:19:45.283	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.3.time
heatingcontrol.0	2019-12-31 11:19:45.281	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.2.time
heatingcontrol.0	2019-12-31 11:19:45.280	debug	(4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time 21
heatingcontrol.0	2019-12-31 11:19:45.278	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.1.time
heatingcontrol.0	2019-12-31 11:19:45.276	debug	(4204) check time for Arbeitszimmer Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time 17
heatingcontrol.0	2019-12-31 11:19:45.269	debug	(4204) check ID Profiles.0.Arbeitszimmer.Sa-So.Periods.0.time
heatingcontrol.0	2019-12-31 11:19:45.269	debug	(4204) FindNextPeriod for 12/31/2019, 10:19:45 AM in Arbeitszimmer
heatingcontrol.0	2019-12-31 11:19:45.262	debug	(4204) check room Arbeitszimmer
heatingcontrol.0	2019-12-31 11:19:45.262	debug	(4204) profile 0
heatingcontrol.0	2019-12-31 11:19:45.260	debug	(4204) get profile
heatingcontrol.0	2019-12-31 11:19:45.260	debug	(4204) profile type 2
heatingcontrol.0	2019-12-31 11:19:45.252	info	(4204) calculating new target temperatures
heatingcontrol.0	2019-12-31 11:19:45.251	info	(4204) external states checked, done
heatingcontrol.0	2019-12-31 11:19:45.249	debug	(4204) checking Path2HolidayPresentDP
heatingcontrol.0	2019-12-31 11:19:45.248	debug	(4204) checking Path2PartyNowDP
heatingcontrol.0	2019-12-31 11:19:45.245	debug	(4204) checking Path2GuestsPresentDP
heatingcontrol.0	2019-12-31 11:19:45.244	debug	(4204) checking Path2VacationDP
heatingcontrol.0	2019-12-31 11:19:45.240	info	(4204) setting Present to true
heatingcontrol.0	2019-12-31 11:19:45.239	debug	(4204) got Present (1) {"val":true,"ack":true,"ts":1577726419908,"q":0,"from":"system.adapter.javascript.0","user":"system.user.admin","lc":1577726419858}
heatingcontrol.0	2019-12-31 11:19:45.237	debug	(4204) checking Path2PresentDP
heatingcontrol.0	2019-12-31 11:19:45.232	info	(4204) setting PublicHolidyToday to true
heatingcontrol.0	2019-12-31 11:19:45.229	debug	(4204) checking Path2FeiertagAdapter
heatingcontrol.0	2019-12-31 11:19:45.228	info	(4204) checking all external states
heatingcontrol.0	2019-12-31 11:19:45.223	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933362844} from deconz.0.Sensors.21.open
heatingcontrol.0	2019-12-31 11:19:45.220	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577638441163} from deconz.0.Sensors.20.open
heatingcontrol.0	2019-12-31 11:19:45.217	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574989,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933207327} from deconz.0.Sensors.19.open
heatingcontrol.0	2019-12-31 11:19:45.210	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574987,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933122635} from deconz.0.Sensors.18.open
heatingcontrol.0	2019-12-31 11:19:45.209	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576933025797} from deconz.0.Sensors.17.open
heatingcontrol.0	2019-12-31 11:19:45.205	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576932905933} from deconz.0.Sensors.16.open
heatingcontrol.0	2019-12-31 11:19:45.203	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577007719646} from deconz.0.Sensors.15.open
heatingcontrol.0	2019-12-31 11:19:45.201	debug	(4204) Check sensors for Wohnzimmer
heatingcontrol.0	2019-12-31 11:19:45.196	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577644284922} from deconz.0.Sensors.24.open
heatingcontrol.0	2019-12-31 11:19:45.195	debug	(4204) got sensor state {"val":0,"ack":true,"ts":1577786742689,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577786742689} from hm-rpc.1.0007D5699E9605.1.STATE
heatingcontrol.0	2019-12-31 11:19:45.192	debug	(4204) Check sensors for Küche
heatingcontrol.0	2019-12-31 11:19:45.186	debug	(4204) got sensor state {"val":0,"ack":true,"ts":1577785259127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1577628013202} from hm-rpc.1.0000D56996187D.1.STATE
heatingcontrol.0	2019-12-31 11:19:45.184	debug	(4204) Check sensors for Badezimmer
heatingcontrol.0	2019-12-31 11:19:45.179	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574990,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1577705276875} from deconz.0.Sensors.23.open
heatingcontrol.0	2019-12-31 11:19:45.176	debug	(4204) got sensor state {"val":false,"ack":true,"ts":1577717574976,"q":0,"from":"system.adapter.deconz.0","user":"system.user.admin","lc":1576925832752} from deconz.0.Sensors.11.open
heatingcontrol.0	2019-12-31 11:19:45.157	debug	(4204) Check sensors for Arbeitszimmer
heatingcontrol.0	2019-12-31 11:19:45.156	debug	(4204) [INFO] status = true next event: 4 Jan 2020 20:00:00
heatingcontrol.0	2019-12-31 11:19:45.155	debug	(4204) [INFO] status = true next event: 4 Jan 2020 15:00:00
heatingcontrol.0	2019-12-31 11:19:45.154	debug	(4204) [INFO] status = true next event: 4 Jan 2020 11:00:00
heatingcontrol.0	2019-12-31 11:19:45.153	debug	(4204) [INFO] status = true next event: 4 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 11:19:45.152	debug	(4204) [INFO] status = true next event: 4 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 11:19:45.151	debug	(4204) [INFO] status = true next event: 31 Dec 2019 20:00:00
heatingcontrol.0	2019-12-31 11:19:45.151	debug	(4204) [INFO] status = true next event: 31 Dec 2019 15:00:00
heatingcontrol.0	2019-12-31 11:19:45.150	debug	(4204) [INFO] status = true next event: 31 Dec 2019 11:00:00
heatingcontrol.0	2019-12-31 11:19:45.150	debug	(4204) [INFO] status = true next event: 1 Jan 2020 07:00:00
heatingcontrol.0	2019-12-31 11:19:45.147	debug	(4204) [INFO] status = true next event: 1 Jan 2020 04:00:00
heatingcontrol.0	2019-12-31 11:19:45.134	debug	(4204) create cron job #9 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 11:19:45.132	debug	(4204) create cron job #8 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 11:19:45.129	debug	(4204) create cron job #7 at 12:0 string: 0 0 12 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 11:19:45.127	debug	(4204) create cron job #6 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 11:19:45.120	debug	(4204) create cron job #5 at 5:0 string: 0 0 5 * * 0,6 Europe/Berlin
heatingcontrol.0	2019-12-31 11:19:45.117	debug	(4204) create cron job #4 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin

[moppel2810]

Jetzt siehts aus als wenn alles funktioniert Alle Thermostate reagieren auf die Einstellungen.
Oder siehst du da noch was was ich ändern sollte?

[Rene_HM]

@moppel2810 sieht soweit gut aus...

[Hobi]

@guergen

Hallo! Das hatte ich Anfangs genommen - allerdings öffnet der Fully oder auch Chrome auf meinem Tablet dann immer eine Tastatur.
Daher habe ich ein System verwendet, dass ich bereits bei meiner Timer-Konfiguration verwendet habe.

LG
Holger

P.S.: Guten Rutsch!

[Hobi]

@guergen
Hallo! Das hatte ich Anfangs genommen - allerdings öffnet der Fully oder auch Chrome auf meinem Tablet dann immer eine Tastatur.
Daher habe ich ein System verwendet, dass ich bereits bei meiner Timer-Konfiguration verwendet habe.
LG
Holger
P.S.: Guten Rutsch!

[martinschm]

@Rene_HM said in Test Adapter HeatingControl v0.3.x:

@martinschm sagte in Test Adapter HeatingControl v0.3.x:

ist evtl untergegangen

nein, das habe ich noch auf dem Schirm. Ich verstehe hier leider nur noch nicht, was hier schief läuft. Da bin ich noch am suchen...
Welche Version vom adapter läuft eigentlich bei dir?

Hi Rene,

frohes neues Jahr.
Bei mir läuft 0.3.9

[Rene_HM]

@martinschm nimm mal bitte die 0.3.14 aus github. Ich habe dort noch ein log hinzugefügt, dann sollte ich sehen, wo das Problem leigt...

[Pittini]

Vis Update 1.1.20 - Update der Mehrprofilversion.
Hinzugefügt: "Aktiv" im Statusfenster, zeigt an welche Heizperiode gerade aktiviert ist.
Hinzugefügt: "Minimaltemperatur" bei den Profilparametern, korrespondierend zur neuen Einstellmöglichkeit im Adapteradmin (löschen wenn unbenutzt).
Hinzugefügt: Grüner Balken unter den Zeit/Temp Einstellungen zur Anzeige der gerade aktiven Periode
Hinzugefügt: Anzeige des aktiven Profils in allen relevanten Blöcken "(P1...)
Edit: Kosmetik

Sieht jetzt so aus

[Jan Fiedler]

Hallo zusammen,

gibt es eine "Start"anleitung? Bei mir wird nach Installation des Adapters nichts an Geräten und/oder Räumen gefunden. Bekomme nur die Meldung " (23387) device list is empty, add dummy device [{"id":0,"name":"TestThermostat","isActive":false,"room":"Office","type":1,"OID_Current":"Test_OID"}]"

[MyMeyer]

@Pittini sagte in Test Adapter HeatingControl v0.3.x:

Vis Update 1.1.20 - Update der Mehrprofilversion.

Wie ist der Thread zum View damit ich ein Import machen könnte ?

[Pittini]

@MyMeyer sagte in Test Adapter HeatingControl v0.3.x:

Wie ist der Thread zum View damit ich ein Import machen könnte ?

Einfach auf das blaue "Vis" in der Ankündigung klicken, das isn Link.

[Gsiberger]

Um den WAF nicht von Anfang an auf Gefriertemperatur zu setzen, möchte ich für das Badezimmer auf Knopfdruck den Override realisieren. Wird der Taster gedrückt werden TemperaturOverride und TemperaturOverrideTime beschrieben.

Das Blockly:

Die Temperatur und Zeit werden gesetzt und der Status geht auch auf override

Im Log sind nach dem starten des Scripts diese Meldungen:

2020-01-02 16:30:53.568 - info: javascript.0 (22252) script.js.common.Tests.Baden__Duschen: Typ von TemperaturOverride ist string
2020-01-02 16:30:53.569 - warn: javascript.0 (22252) You are assigning a string to the state "heatingcontrol.0.Rooms.aTEST.TemperaturOverride" which expects a float. Please fix your code to use a float or change the state type to string. This warning might become an error in future versions.

Wenn ich die Solltemperatur nicht konvertiere, dann ist die erste Warnmeldung:

You are assigning a number to the state .....

Wie kann ich das Blockly ändern, damit es nicht zu diesen Warnungen kommt? Der Typ der Solltemperatur wurde auf alle möglichen (und unmöglichen) Einstellungen geändert um ohne Konvertierung zu übergeben, alles leider ohne Erfolg.

[Rene_HM]

@Jan-Fiedler eine Start-Anleitung gibt es noch nicht, aber die Frage wurde hier schon öfters gestellt...

1. keine Räume: das liegt daran, dass du in der Aufzählung hier keine Räume hast. Einfach Räume hinzufügen und im admin "Suche Räume" anklicken.

2. keine Geräte: Derzeit werden nur Homematic - Geräte automatisch gefunden. Alles andere muss manuell konfiguriert werden:

[Rene_HM]

@Gsiberger mit Blockly kenne ich mich nicht aus. Mit javascript würde ich folgendes versuchen:

setState('heatingcontrol.0.Rooms.Arbeitszimmer.TemperaturOverride', parseFloat("25.0"));
setState('heatingcontrol.0.Rooms.Arbeitszimmer.TemperaturOverrideTime',"00:20");

Ich denke aber, die Warnung kannst du ignorieren, solange die Werte übernommen werden...

[Gsiberger]

@Rene_HM
OK, danke

[Jan Fiedler]

@Rene_HM Danke!

[Paan83]

Hallo,
der Adapter läuft jetzt seid zwei Wochen und erstmal ein grosses Dankeschön an @Rene_HM für diese tolle Arbeit.

Zwei kleine Fragen hätte ich noch:
-Ich habe momentan die Version 0.3.10. Wie installiere ich die neueste Version des Adapters ohne dass ich die alte Instanz deinstallieren muss? Oder kann man nicht einfach "drüberinstallieren"? Ich habs mit dem Button upload versucht, bleibt aber immer auf Version 0.3.10.

-Ich hab in einem Raum drei Thermostate von HM und habe mir jetzt einen Wandthermostat von HM dazu gekauft. Wo muss ich im Adapter welche welche Eintragen, damit das Zusammenspiel der Heizkörperthermostate und des Wandthermosatates funktioniert?

Danke euch

[Sempre]

@Paan83

zu 1. Entweder das Repository auf Latest stellen, dann sind auch nicht Stable Updates sichtbar, du solltest dir dann aber im klaren sein was du machst, oder einfach über den Github-Link wie bei der initialen Installation "drüber" installieren.

zu 2. Du konfigurierst in der CCU eine Gruppe bzw. verknüpfst deine Thermostate mit dem Wandthermostat und wenn das alles passt änderst du in Heatingcontrol einfach in dem entsprechenden Raum deine Konfiguration auf den Wandthermostat ab. Der Wandthermostat steuert ja die einzelnen Heizkörper, das muss nicht durch Heatingcontrol erfolgen. Ich habe es genau so bei mir auch am laufen und das nun seit ca. 3 Monaten.