Weihnachtsangebot 2025! 🎄

[Rene_HM]

@webwanze Die Fehlermeldung sagt, dass auf einen Datenpunkt, den der Adapter eigentlich anlegt, nicht zugegriffen werden kann...

Zeige mal den Datenbaum für dein neues Device. Der sollte irgendwie so aussehen:

Bei dir fehlt wohl der State...
Wie heisst dein device? sind da evtl. Leerzeichen drin?

[Webwanze]

@rene_hm
Datenpunkt passt. Mit State usw.
Leerzeichen gibt es auch nicht.
Auch wenn ich auf 'Schätzung' stelle, kommt der Fehler. Also ohne jeglichen Datenpunkte.

Nochmal zum Reproduzieren:
Ausgangssituation:

• Adapter installiert und Basiseinstellungen (IP, Port, ...) OK.
• Kein Device konfiguriert
  -> Läuft!

Hinzufügen eines Devices:

• '+' klicken
• ID: F-00...-00...1-00 lassen
• Name: newDevice0 lassen
• Speichern
  -> Läuft nicht mehr.

Zurück zur Konfiguration des Devices:

• Hersteller=ACME/Seriennummer=1234/Gerätetyp=Heizung/Mindestleistung=0;max. Leistung 1000; Unterbrechung erlaubt=Nein
• Zähler=Schätzung
• Schalter=Immer an; Gerät kann ein/ausgeschaltet werden=Nein
• Energieanforderungen aktiv = Nein
  -> Läuft nicht

Habe auch versucht, alle möglichen Datenpunkte im Device zu setzen, falls der Adapter dort Daten holen will, auch wenn die Funktionalität eigentlich deaktiviert ist. Egal was ich einstelle, es funktioniert nicht. Sobald ich das gesamte Device deaktiviere (Checkbox) läuft der Adapter wieder.

Nachtrag:
In den Objekten werden wie bei deinem Screenshot alle Datenpunkte angezeigt:
Changed = null
Energy = 0 Wh
RecommendedState = null
State = null

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

State = null

und da sehen wir das Problem. Der Adapter versucht "waiting" dorthin zu schreiben, null sollte da nicht stehen...

Kopiere mal den kompletten Namen dieses Datenpunktes und poste ihn hier oder mache einen screen shot wie ich ihn gezeigt habe.

[Webwanze]

@rene_hm

Muss bei mir da auch 'waiting' stehen?
Ich will ja nicht über semp steuern lassen. Also wartet bei mir auch nix - zumindest nicht auf den HM2.

[Rene_HM]

@webwanze ja, da wird auch "waiting" stehen, weil das der Standard-Zustand ist.

Ich sehe den Absturz auch im sentry (36 mal heute, 28 mal gestern, aber nur bei dir) , kann es mir aber noch nicht erklären.
Ich habe mal eine kleine Änderung eingebaut und auf github hochgeladen. Kannst du den Adapter von https://github.com/rg-engineering/ioBroker.semp installieren und debug-loglevel einschalten? Vielleicht sehen wir dann etwas mehr im log...

[Webwanze]

@rene_hm

2023-03-10 20:56:58.669 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-10 20:56:58.704 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52584
2023-03-10 20:56:59.337 - debug: semp.0 (52584) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:56:59.359 - debug: semp.0 (52584) Objects client ready ... initialize now
2023-03-10 20:56:59.360 - debug: semp.0 (52584) Objects create System PubSub Client
2023-03-10 20:56:59.361 - debug: semp.0 (52584) Objects create User PubSub Client
2023-03-10 20:56:59.375 - debug: semp.0 (52584) Objects client initialize lua scripts
2023-03-10 20:56:59.379 - debug: semp.0 (52584) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:56:59.390 - debug: semp.0 (52584) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:56:59.395 - debug: semp.0 (52584) States create System PubSub Client
2023-03-10 20:56:59.396 - debug: semp.0 (52584) States create User PubSub Client
2023-03-10 20:56:59.403 - debug: semp.0 (52584) States connected to redis: 127.0.0.1:9000
2023-03-10 20:56:59.428 - debug: semp.0 (52584) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:56:59.609 - info: semp.0 (52584) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:56:59.627 - debug: semp.0 (52584) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:56:59.632 - debug: semp.0 (52584) SEMPServer created
2023-03-10 20:56:59.632 - debug: semp.0 (52584) gateway created...
2023-03-10 20:56:59.635 - debug: semp.0 (52584) SEMP server listening on 9765
2023-03-10 20:56:59.638 - debug: semp.0 (52584) SSDPServer started
2023-03-10 20:56:59.638 - debug: semp.0 (52584) gateway started...
2023-03-10 20:56:59.638 - debug: semp.0 (52584) Started all!
2023-03-10 20:56:59.638 - debug: semp.0 (52584) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:56:59.639 - debug: semp.0 (52584) add device F-00000000-000000000001-00
2023-03-10 20:56:59.640 - debug: semp.0 (52584) can use optional energy: false
2023-03-10 20:56:59.640 - debug: semp.0 (52584) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:56:59.642 - info: semp.0 (52584) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:56:59.643 - debug: semp.0 (52584) set device
2023-03-10 20:56:59.643 - debug: semp.0 (52584) newDevice0 setState On
2023-03-10 20:56:59.644 - debug: semp.0 (52584) UpdateData
2023-03-10 20:56:59.644 - debug: semp.0 (52584) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:56:59.655 - debug: semp.0 (52584) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:56:59.658 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.659 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.659 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.663 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:56:59.663 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.676 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.677 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.677 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.678 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:56:59.679 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.683 - debug: semp.0 (52584) delete all devices
2023-03-10 20:56:59.683 - debug: semp.0 (52584) SEMP server stopped
2023-03-10 20:56:59.684 - info: semp.0 (52584) terminating
2023-03-10 20:56:59.685 - debug: semp.0 (52584) Plugin sentry destroyed
2023-03-10 20:56:59.685 - warn: semp.0 (52584) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:56:59.689 - debug: semp.0 (52584) SSDPServer stopped
2023-03-10 20:56:59.689 - debug: semp.0 (52584) gateway stopped...
2023-03-10 20:57:00.225 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:00.226 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:00.226 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled
2023-03-10 20:57:30.259 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52599
2023-03-10 20:57:30.854 - debug: semp.0 (52599) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:57:30.877 - debug: semp.0 (52599) Objects client ready ... initialize now
2023-03-10 20:57:30.878 - debug: semp.0 (52599) Objects create System PubSub Client
2023-03-10 20:57:30.879 - debug: semp.0 (52599) Objects create User PubSub Client
2023-03-10 20:57:30.895 - debug: semp.0 (52599) Objects client initialize lua scripts
2023-03-10 20:57:30.898 - debug: semp.0 (52599) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:57:30.911 - debug: semp.0 (52599) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:57:30.916 - debug: semp.0 (52599) States create System PubSub Client
2023-03-10 20:57:30.917 - debug: semp.0 (52599) States create User PubSub Client
2023-03-10 20:57:30.925 - debug: semp.0 (52599) States connected to redis: 127.0.0.1:9000
2023-03-10 20:57:30.948 - debug: semp.0 (52599) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:57:31.103 - info: semp.0 (52599) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:57:31.121 - debug: semp.0 (52599) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:57:31.125 - debug: semp.0 (52599) SEMPServer created
2023-03-10 20:57:31.126 - debug: semp.0 (52599) gateway created...
2023-03-10 20:57:31.129 - debug: semp.0 (52599) SEMP server listening on 9765
2023-03-10 20:57:31.132 - debug: semp.0 (52599) SSDPServer started
2023-03-10 20:57:31.132 - debug: semp.0 (52599) gateway started...
2023-03-10 20:57:31.132 - debug: semp.0 (52599) Started all!
2023-03-10 20:57:31.132 - debug: semp.0 (52599) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:57:31.133 - debug: semp.0 (52599) add device F-00000000-000000000001-00
2023-03-10 20:57:31.134 - debug: semp.0 (52599) can use optional energy: false
2023-03-10 20:57:31.134 - debug: semp.0 (52599) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:57:31.136 - info: semp.0 (52599) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:57:31.137 - debug: semp.0 (52599) set device
2023-03-10 20:57:31.137 - debug: semp.0 (52599) newDevice0 setState On
2023-03-10 20:57:31.137 - debug: semp.0 (52599) UpdateData
2023-03-10 20:57:31.138 - debug: semp.0 (52599) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:57:31.148 - debug: semp.0 (52599) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:57:31.150 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.151 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.151 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.154 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.154 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.166 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.166 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.166 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.167 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.168 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.171 - debug: semp.0 (52599) delete all devices
2023-03-10 20:57:31.171 - debug: semp.0 (52599) SEMP server stopped
2023-03-10 20:57:31.172 - info: semp.0 (52599) terminating
2023-03-10 20:57:31.172 - debug: semp.0 (52599) Plugin sentry destroyed
2023-03-10 20:57:31.172 - warn: semp.0 (52599) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:57:31.175 - debug: semp.0 (52599) SSDPServer stopped
2023-03-10 20:57:31.176 - debug: semp.0 (52599) gateway stopped...
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.720 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:31.721 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled

[Rene_HM]

@webwanze Das log sieht eigentlich gut aus, trotzdem funktioniert das ganze bei dir nicht. :-(
Ich habe nochmal ein paar logs hinzugefügt. Kannst du bitte nochmal von github (wie oben) installieren?

[Webwanze]

@rene_hm

Hallo,

die Instanz wird jetzt grün:

2023-03-11 09:55:55.393 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-11 09:55:55.426 - info: host.ioBroker instance system.adapter.semp.0 started with pid 53629
2023-03-11 09:55:56.057 - debug: semp.0 (53629) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-11 09:55:56.076 - debug: semp.0 (53629) Objects client ready ... initialize now
2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create System PubSub Client
2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create User PubSub Client
2023-03-11 09:55:56.099 - debug: semp.0 (53629) Objects client initialize lua scripts
2023-03-11 09:55:56.103 - debug: semp.0 (53629) Objects connected to redis: 127.0.0.1:9001
2023-03-11 09:55:56.114 - debug: semp.0 (53629) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-11 09:55:56.120 - debug: semp.0 (53629) States create System PubSub Client
2023-03-11 09:55:56.121 - debug: semp.0 (53629) States create User PubSub Client
2023-03-11 09:55:56.128 - debug: semp.0 (53629) States connected to redis: 127.0.0.1:9000
2023-03-11 09:55:56.154 - debug: semp.0 (53629) Plugin sentry Initialize Plugin (enabled=true)
2023-03-11 09:55:56.299 - info: semp.0 (53629) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#6225ab9cb4be90b2b25f1f20179f6e884e287309) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-11 09:55:56.317 - debug: semp.0 (53629) SSDPServer created: http://192.168.1.2:9765/description.xml ba7895e3-74c6-47ee-a912-e544105b6f50
2023-03-11 09:55:56.322 - debug: semp.0 (53629) SEMPServer created
2023-03-11 09:55:56.322 - debug: semp.0 (53629) gateway created...
2023-03-11 09:55:56.325 - debug: semp.0 (53629) SEMP server listening on 9765
2023-03-11 09:55:56.328 - debug: semp.0 (53629) SSDPServer started
2023-03-11 09:55:56.328 - debug: semp.0 (53629) gateway started...
2023-03-11 09:55:56.328 - debug: semp.0 (53629) Started all!
2023-03-11 09:55:56.328 - debug: semp.0 (53629) add device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-11 09:55:56.329 - debug: semp.0 (53629) add device F-0-000000000001-00
2023-03-11 09:55:56.330 - error: semp.0 (53629) newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz
2023-03-11 09:55:56.330 - debug: semp.0 (53629) can use optional energy: false
2023-03-11 09:55:56.330 - debug: semp.0 (53629) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-11 09:55:56.332 - info: semp.0 (53629) device created F-0-000000000001-00 newDevice0
2023-03-11 09:55:56.333 - debug: semp.0 (53629) set device
2023-03-11 09:55:56.333 - debug: semp.0 (53629) newDevice0 setState On
2023-03-11 09:55:56.334 - debug: semp.0 (53629) UpdateData
2023-03-11 09:55:56.334 - debug: semp.0 (53629) device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-11 09:55:56.348 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:55:56.350 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State
2023-03-11 09:55:56.351 - error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State
2023-03-11 09:55:56.354 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State
2023-03-11 09:55:56.355 - error: semp.0 (53629) newDevice0 could not set state on on Devices.newDevice0.State
2023-03-11 09:55:56.357 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"recommended state from SHM","type":"boolean","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926725,"_id":"semp.0.Devices.newDevice0.RecommendedState","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.381 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"last time recommendation changed","type":"string","role":"value.time","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926734,"_id":"semp.0.Devices.newDevice0.Changed","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.385 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"current State","type":"string","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926738,"_id":"semp.0.Devices.newDevice0.State","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.386 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"Energy used","type":"number","unit":"Wh","role":"value","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926744,"_id":"semp.0.Devices.newDevice0.Energy","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:59.376 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:55:59.377 - info: semp.0 (53629) adapter discovered by SHM
2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524956349 = 0.11973000000000002Wh
2023-03-11 09:56:15.007 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:15.008 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524960033 = 0.6064175Wh
2023-03-11 09:56:16.376 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524975008 = 1.09395Wh
2023-03-11 09:56:36.377 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 setLastPower 122 number AlwaysOn W
2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 calc energy 122 1678524990009 = 1.6022155555555555Wh

Bei den Objekten finden sich immer noch die (null)s.

Danke für deine Unterstützung!!!

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State

Der Fehler ist noch nicht behoben, nur ignoriert. Ich schaue das log nochmal genauer an. Irgendetwas passt noch nicht...

newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz

und den Fehler darfst du auch nicht ignorieren...

[Webwanze]

@rene_hm sagte in Adapter: SMA SEMP:

newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz

und den Fehler darfst du auch nicht ignorieren...

Ich habe da nichts geändert. Die ID wurde beim Hinzufügen des Devices automatisch generiert. Habe es aber jetzt mal geändert. Macht natürlich keinen Unterschied.

Über Java-Script
setState("semp.0.Devices.newDevice0.State", "test")
kann ich den State übrigens ändern.

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

Macht natürlich keinen Unterschied.

für o.g. Problem macht es keinen Unterschied, funktionell ist das wichtig.

[Webwanze]

@rene_hm
Ich habe noch etwas herumgespielt und auch was herausgefunden:

Adapter installieren
Device anlegen
-> kein Update State

Host neu starten
-> kein Update State

State von Hand oder Script ändern
-> Fehler verschwunden, allerdings wird mein String "test" nicht upgedated
-> ich nehme an, weil sich der State für die Instanz nicht geändert hat, erfolgt kein Update. OK.

Instanz neu starten
-> Alles i.O.
-> State wird auf "on" gesetzt.

[Webwanze]

Wenn ich nun ein weiteres Device hinzufüge, wird der State ebenfalls nicht upgedated.
State von Hand auf z.B. "off" setzen.
Instanz neu starten

funktioniert.

Die Were für "Changed" und "RecommendedState" werden übrigens nicht gesetzt. Evtl. wird das auch nicht von der Instanz versucht ...

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

Die Werte für "Changed" und "RecommendedState" werden übrigens nicht gesetzt

Die werden erst gesetzt, wenn eine Energieanforderung vom SHM beantwortet wurde. Solange du dein Gerät auf "immer an" hast und keine Energieanforderung stellst, reagiert der SHM nicht. Das Gerät wird dann nur im Portal dargestellt und zur Berechnung der Prognose herangezogen...

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

State von Hand auf z.B. "off" setzen.
Instanz neu starten
funktioniert.

Habe die Reihenfolge des startups vom Adapter geändert. Außerdem schreibe ich jetzt default-Werte auf die DP. Hoffe, das löst das Problem...

[Webwanze]

@rene_hm

Scheint jetzt zu funkionieren:

2023-03-11 14:33:46.618 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-11 14:33:46.650 - info: host.ioBroker instance system.adapter.semp.0 started with pid 4472
2023-03-11 14:33:47.283 - debug: semp.0 (4472) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-11 14:33:47.302 - debug: semp.0 (4472) Objects client ready ... initialize now
2023-03-11 14:33:47.303 - debug: semp.0 (4472) Objects create System PubSub Client
2023-03-11 14:33:47.304 - debug: semp.0 (4472) Objects create User PubSub Client
2023-03-11 14:33:47.317 - debug: semp.0 (4472) Objects client initialize lua scripts
2023-03-11 14:33:47.321 - debug: semp.0 (4472) Objects connected to redis: 127.0.0.1:9001
2023-03-11 14:33:47.332 - debug: semp.0 (4472) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-11 14:33:47.337 - debug: semp.0 (4472) States create System PubSub Client
2023-03-11 14:33:47.338 - debug: semp.0 (4472) States create User PubSub Client
2023-03-11 14:33:47.347 - debug: semp.0 (4472) States connected to redis: 127.0.0.1:9000
2023-03-11 14:33:47.370 - debug: semp.0 (4472) Plugin sentry Initialize Plugin (enabled=true)
2023-03-11 14:33:47.546 - info: semp.0 (4472) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#ba417263657375badc4c456e5859f8b0e308da66) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-11 14:33:47.563 - debug: semp.0 (4472) SSDPServer created: http://192.168.1.2:9765/description.xml 58ee6313-b746-46aa-aae2-954018429865
2023-03-11 14:33:47.568 - debug: semp.0 (4472) SEMPServer created
2023-03-11 14:33:47.568 - debug: semp.0 (4472) gateway created...
2023-03-11 14:33:47.571 - debug: semp.0 (4472) SEMP server listening on 9765
2023-03-11 14:33:47.574 - debug: semp.0 (4472) SSDPServer started
2023-03-11 14:33:47.574 - debug: semp.0 (4472) gateway started...
2023-03-11 14:33:47.574 - debug: semp.0 (4472) Started all!
2023-03-11 14:33:47.575 - debug: semp.0 (4472) add device {"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-11 14:33:47.575 - debug: semp.0 (4472) add device F-12345678-123456789012-12
2023-03-11 14:33:47.576 - debug: semp.0 (4472) can use optional energy: false
2023-03-11 14:33:47.577 - info: semp.0 (4472) device created F-12345678-123456789012-12 newDevice0
2023-03-11 14:33:47.577 - debug: semp.0 (4472) set device
2023-03-11 14:33:47.577 - debug: semp.0 (4472) newDevice0 setState On
2023-03-11 14:33:47.578 - debug: semp.0 (4472) UpdateData
2023-03-11 14:33:47.579 - debug: semp.0 (4472) device {"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-11 14:33:47.579 - debug: semp.0 (4472) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-11 14:33:47.579 - debug: semp.0 (4472) result [{"IsActive":true,"ID":"F-12345678-123456789012-12","Name":"newDevice0","Vendor":"ACME","Type":"Dryer","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-11 14:33:47.593 - debug: semp.0 (4472) newDevice0 got {"val":"on","ack":true,"ts":1678541192446,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1678541192446} from Devices.newDevice0.State
2023-03-11 14:33:47.597 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"recommended state from SHM","type":"boolean","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192445,"_id":"semp.0.Devices.newDevice0.RecommendedState","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.RecommendedState
2023-03-11 14:33:47.649 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"last time recommendation changed","type":"string","role":"value.time","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192499,"_id":"semp.0.Devices.newDevice0.Changed","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.Changed
2023-03-11 14:33:47.650 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"current State","type":"string","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192505,"_id":"semp.0.Devices.newDevice0.State","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.State
2023-03-11 14:33:47.652 - debug: semp.0 (4472) newDevice0 got object {"type":"state","common":{"name":"Energy used","type":"number","unit":"Wh","role":"value","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678541192509,"_id":"semp.0.Devices.newDevice0.Energy","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}} for Devices.newDevice0.Energy
2023-03-11 14:33:47.655 - debug: semp.0 (4472) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-11 14:33:47.657 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:33:47.681 - debug: semp.0 (4472) newDevice0 got {"val":"on","ack":true,"ts":1678541192446,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1678541192446} from Devices.newDevice0.State
2023-03-11 14:33:50.632 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:33:50.632 - info: semp.0 (4472) adapter discovered by SHM
2023-03-11 14:33:56.466 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:33:56.466 - debug: semp.0 (4472) get all devices
2023-03-11 14:33:56.467 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:33:56.469 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:33:56.470 - debug: semp.0 (4472) response sent
2023-03-11 14:33:56.627 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:33:56.627 - debug: semp.0 (4472) get all devices
2023-03-11 14:33:56.627 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:33:56.628 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:33:56.629 - debug: semp.0 (4472) response sent
2023-03-11 14:33:56.727 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:33:56.727 - debug: semp.0 (4472) get all devices
2023-03-11 14:33:56.727 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:33:56.728 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:33:56.728 - debug: semp.0 (4472) response sent
2023-03-11 14:34:00.048 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:34:00.048 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541627657 = 0.11358416666666667Wh
2023-03-11 14:34:07.617 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:34:15.008 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:34:15.008 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541640048 = 0.2507175Wh
2023-03-11 14:34:27.620 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:34:30.026 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:34:30.027 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541655008 = 0.3883916666666667Wh
2023-03-11 14:34:41.757 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:34:41.795 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:34:45.008 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:34:45.008 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541670027 = 0.5257175000000001Wh
2023-03-11 14:34:47.615 - debug: semp.0 (4472) SHM requested description
2023-03-11 14:34:56.905 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:34:56.905 - debug: semp.0 (4472) get all devices
2023-03-11 14:34:56.906 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:34:56.907 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:34:56.909 - debug: semp.0 (4472) response sent
2023-03-11 14:34:57.093 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:34:57.093 - debug: semp.0 (4472) get all devices
2023-03-11 14:34:57.094 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:34:57.094 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:34:57.095 - debug: semp.0 (4472) response sent
2023-03-11 14:34:57.185 - debug: semp.0 (4472) SHM requested all devices. /semp/ ::ffff:192.168.0.49 http
2023-03-11 14:34:57.186 - debug: semp.0 (4472) get all devices
2023-03-11 14:34:57.186 - debug: semp.0 (4472) get all devices [{"deviceInfo":{"Identification":{"DeviceId":"F-12345678-123456789012-12","DeviceName":"newDevice0","DeviceType":"Dryer","DeviceSerial":"1234","DeviceVendor":"ACME"},"Characteristics":{"MaxPowerConsumption":"1000"},"Capabilities":{"CurrentPower":{"Method":"Measurement"},"Timestamps":{"AbsoluteTimestamps":false},"Interruptions":{"InterruptionsAllowed":false},"Requests":{"OptionalEnergy":false}}},"deviceStatus":{"DeviceId":"F-12345678-123456789012-12","EMSignalsAccepted":true,"Status":"On","PowerConsumption":{"PowerInfo":[{"AveragePower":33,"Timestamp":0,"AveragingInterval":60}]}},"planningRequest":{"Timeframe":[]}}]
2023-03-11 14:34:57.186 - debug: semp.0 (4472) response xml
F-12345678-123456789012-12
newDevice0
Dryer
1234
ACME
1000
Measurement
false
false
false
F-12345678-123456789012-12
true
On
33
0
60
2023-03-11 14:34:57.187 - debug: semp.0 (4472) response sent
2023-03-11 14:35:00.013 - debug: semp.0 (4472) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-11 14:35:00.014 - debug: semp.0 (4472) newDevice0 calc energy 33 1678541685008 = 0.6632633333333334Wh

[cb187]

Nutzt hier noch keiner die PV Überschussladen Funktion mit automatischer Phasenumschaltung?

[cb187]

Hab jetzt mal zwei Wallbox hinzugefügt, schade er lässt nicht beide gleichzeitig laden und teilt sich das auf.Schaltet nur zwischen beiden Boxen immer um.

[Rene_HM]

@cb187 reicht PV - Leistung nicht für beide?

[cb187]

@rene_hm für beide hätte es gereicht wenn es aufgeteilt wäre.Aber ka wie sma das handhabt bzw ist die frage ob das bei den überhaupt geht.