Adapter: SMA SEMP

Rene_HM

@wildfire0815 ändere doch einfach die Nummer nach dem "F-".

Außerdem könntest du noch das log vom SHM selbst anschauen.

Kopieren des "SMA Connection Assist" von https://github.com/rg-engineering/ioBroker.semp/tree/master/docu/SMA/connection-assist.jar auf den Windows-PC und irgendwohin speichern

dann eine Eingabe -Aufforderung öffnen, in das Verzeichnis wechseln, wo die jar-Datei gespeichert wurde und

connection-assist.jar -discoverHoman

aufrufen.

das öffnet ein Browser-Fenster
die SMA Geräte werden gesucht
den SHM auswählen und verbinden
als Passwort den RID eingeben (SHM2)
Systemstatus speichern

als smasl Datei speichern und nach zip umbenenennen (Achtung! Pfad merken, wohin gespeichert wurde)

in der zip ist dann ein SEMPLog.tgz
das SEMPLog.tgz entpacken
dort sind dann 5 logs der letzten 5 Stunden

Vielleicht finden wir ja da einen Hinweis.

Wildfire0815

@rene_hm said in Adapter: SMA SEMP:

connection-assist.jar -discoverHoman

Das hat geholfen. Danke für Deine Mühe.
Der vorgeschlagene Wert für die Basis ID hatte bei mir nur 7 Zeichen. Das hatte ich nicht übrüft.
In dem LOG kam dann die Meldung "Invalid ID".

Rene_HM

@wildfire0815 sagte in Adapter: SMA SEMP:

Basis ID hatte bei mir nur 7 Zeichen

das habe ich auch übersehen, sorry.

Webwanze

Hallo,

ich habe die aktuelle Version des Adapters auf meinem iobroker. V 0.3.1

Nach der Erstellung der Instanz läuft diese wie gewünscht. Grün.

Nachdem ich auch nur ein Device erstellt habe, ist das leider nicht mehr der Fall. Folgende Meldung im Log:

Habe den Adapter auch schon deinstalliert/installiert, löst das Problem aber nicht.

Grüße,

Thomas

cb187

@webwanze

Würde mal behaupten das es an deinem erstellen device liegt er kann den datenpunkt nicht lesen.so verstehe ich das.

Rene_HM

@webwanze Die Fehlermeldung sagt, dass auf einen Datenpunkt, den der Adapter eigentlich anlegt, nicht zugegriffen werden kann...

Zeige mal den Datenbaum für dein neues Device. Der sollte irgendwie so aussehen:

Bei dir fehlt wohl der State...
Wie heisst dein device? sind da evtl. Leerzeichen drin?

Webwanze

@rene_hm
Datenpunkt passt. Mit State usw.
Leerzeichen gibt es auch nicht.
Auch wenn ich auf 'Schätzung' stelle, kommt der Fehler. Also ohne jeglichen Datenpunkte.

Nochmal zum Reproduzieren:
Ausgangssituation:

Adapter installiert und Basiseinstellungen (IP, Port, ...) OK.
Kein Device konfiguriert
-> Läuft!

Hinzufügen eines Devices:

'+' klicken
ID: F-00...-00...1-00 lassen
Name: newDevice0 lassen
Speichern
-> Läuft nicht mehr.

Zurück zur Konfiguration des Devices:

Hersteller=ACME/Seriennummer=1234/Gerätetyp=Heizung/Mindestleistung=0;max. Leistung 1000; Unterbrechung erlaubt=Nein
Zähler=Schätzung
Schalter=Immer an; Gerät kann ein/ausgeschaltet werden=Nein
Energieanforderungen aktiv = Nein
-> Läuft nicht

Habe auch versucht, alle möglichen Datenpunkte im Device zu setzen, falls der Adapter dort Daten holen will, auch wenn die Funktionalität eigentlich deaktiviert ist. Egal was ich einstelle, es funktioniert nicht. Sobald ich das gesamte Device deaktiviere (Checkbox) läuft der Adapter wieder.

Nachtrag:
In den Objekten werden wie bei deinem Screenshot alle Datenpunkte angezeigt:
Changed = null
Energy = 0 Wh
RecommendedState = null
State = null

Rene_HM

@webwanze sagte in Adapter: SMA SEMP:

State = null

und da sehen wir das Problem. Der Adapter versucht "waiting" dorthin zu schreiben, null sollte da nicht stehen...

Kopiere mal den kompletten Namen dieses Datenpunktes und poste ihn hier oder mache einen screen shot wie ich ihn gezeigt habe.

Webwanze

@rene_hm

Muss bei mir da auch 'waiting' stehen?
Ich will ja nicht über semp steuern lassen. Also wartet bei mir auch nix - zumindest nicht auf den HM2.

Rene_HM

@webwanze ja, da wird auch "waiting" stehen, weil das der Standard-Zustand ist.

Ich sehe den Absturz auch im sentry (36 mal heute, 28 mal gestern, aber nur bei dir) , kann es mir aber noch nicht erklären.
Ich habe mal eine kleine Änderung eingebaut und auf github hochgeladen. Kannst du den Adapter von https://github.com/rg-engineering/ioBroker.semp installieren und debug-loglevel einschalten? Vielleicht sehen wir dann etwas mehr im log...

Webwanze

@rene_hm

2023-03-10 20:56:58.669 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-10 20:56:58.704 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52584
2023-03-10 20:56:59.337 - debug: semp.0 (52584) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:56:59.359 - debug: semp.0 (52584) Objects client ready ... initialize now
2023-03-10 20:56:59.360 - debug: semp.0 (52584) Objects create System PubSub Client
2023-03-10 20:56:59.361 - debug: semp.0 (52584) Objects create User PubSub Client
2023-03-10 20:56:59.375 - debug: semp.0 (52584) Objects client initialize lua scripts
2023-03-10 20:56:59.379 - debug: semp.0 (52584) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:56:59.390 - debug: semp.0 (52584) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:56:59.395 - debug: semp.0 (52584) States create System PubSub Client
2023-03-10 20:56:59.396 - debug: semp.0 (52584) States create User PubSub Client
2023-03-10 20:56:59.403 - debug: semp.0 (52584) States connected to redis: 127.0.0.1:9000
2023-03-10 20:56:59.428 - debug: semp.0 (52584) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:56:59.609 - info: semp.0 (52584) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:56:59.627 - debug: semp.0 (52584) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:56:59.632 - debug: semp.0 (52584) SEMPServer created
2023-03-10 20:56:59.632 - debug: semp.0 (52584) gateway created...
2023-03-10 20:56:59.635 - debug: semp.0 (52584) SEMP server listening on 9765
2023-03-10 20:56:59.638 - debug: semp.0 (52584) SSDPServer started
2023-03-10 20:56:59.638 - debug: semp.0 (52584) gateway started...
2023-03-10 20:56:59.638 - debug: semp.0 (52584) Started all!
2023-03-10 20:56:59.638 - debug: semp.0 (52584) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:56:59.639 - debug: semp.0 (52584) add device F-00000000-000000000001-00
2023-03-10 20:56:59.640 - debug: semp.0 (52584) can use optional energy: false
2023-03-10 20:56:59.640 - debug: semp.0 (52584) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:56:59.642 - info: semp.0 (52584) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:56:59.643 - debug: semp.0 (52584) set device
2023-03-10 20:56:59.643 - debug: semp.0 (52584) newDevice0 setState On
2023-03-10 20:56:59.644 - debug: semp.0 (52584) UpdateData
2023-03-10 20:56:59.644 - debug: semp.0 (52584) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:56:59.655 - debug: semp.0 (52584) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:56:59.658 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.659 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.659 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.663 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:56:59.663 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.676 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.677 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.677 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.678 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:56:59.679 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.683 - debug: semp.0 (52584) delete all devices
2023-03-10 20:56:59.683 - debug: semp.0 (52584) SEMP server stopped
2023-03-10 20:56:59.684 - info: semp.0 (52584) terminating
2023-03-10 20:56:59.685 - debug: semp.0 (52584) Plugin sentry destroyed
2023-03-10 20:56:59.685 - warn: semp.0 (52584) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:56:59.689 - debug: semp.0 (52584) SSDPServer stopped
2023-03-10 20:56:59.689 - debug: semp.0 (52584) gateway stopped...
2023-03-10 20:57:00.225 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:00.226 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:00.226 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled
2023-03-10 20:57:30.259 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52599
2023-03-10 20:57:30.854 - debug: semp.0 (52599) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:57:30.877 - debug: semp.0 (52599) Objects client ready ... initialize now
2023-03-10 20:57:30.878 - debug: semp.0 (52599) Objects create System PubSub Client
2023-03-10 20:57:30.879 - debug: semp.0 (52599) Objects create User PubSub Client
2023-03-10 20:57:30.895 - debug: semp.0 (52599) Objects client initialize lua scripts
2023-03-10 20:57:30.898 - debug: semp.0 (52599) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:57:30.911 - debug: semp.0 (52599) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:57:30.916 - debug: semp.0 (52599) States create System PubSub Client
2023-03-10 20:57:30.917 - debug: semp.0 (52599) States create User PubSub Client
2023-03-10 20:57:30.925 - debug: semp.0 (52599) States connected to redis: 127.0.0.1:9000
2023-03-10 20:57:30.948 - debug: semp.0 (52599) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:57:31.103 - info: semp.0 (52599) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:57:31.121 - debug: semp.0 (52599) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:57:31.125 - debug: semp.0 (52599) SEMPServer created
2023-03-10 20:57:31.126 - debug: semp.0 (52599) gateway created...
2023-03-10 20:57:31.129 - debug: semp.0 (52599) SEMP server listening on 9765
2023-03-10 20:57:31.132 - debug: semp.0 (52599) SSDPServer started
2023-03-10 20:57:31.132 - debug: semp.0 (52599) gateway started...
2023-03-10 20:57:31.132 - debug: semp.0 (52599) Started all!
2023-03-10 20:57:31.132 - debug: semp.0 (52599) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:57:31.133 - debug: semp.0 (52599) add device F-00000000-000000000001-00
2023-03-10 20:57:31.134 - debug: semp.0 (52599) can use optional energy: false
2023-03-10 20:57:31.134 - debug: semp.0 (52599) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:57:31.136 - info: semp.0 (52599) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:57:31.137 - debug: semp.0 (52599) set device
2023-03-10 20:57:31.137 - debug: semp.0 (52599) newDevice0 setState On
2023-03-10 20:57:31.137 - debug: semp.0 (52599) UpdateData
2023-03-10 20:57:31.138 - debug: semp.0 (52599) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:57:31.148 - debug: semp.0 (52599) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:57:31.150 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.151 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.151 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.154 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.154 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.166 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.166 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.166 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.167 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.168 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.171 - debug: semp.0 (52599) delete all devices
2023-03-10 20:57:31.171 - debug: semp.0 (52599) SEMP server stopped
2023-03-10 20:57:31.172 - info: semp.0 (52599) terminating
2023-03-10 20:57:31.172 - debug: semp.0 (52599) Plugin sentry destroyed
2023-03-10 20:57:31.172 - warn: semp.0 (52599) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:57:31.175 - debug: semp.0 (52599) SSDPServer stopped
2023-03-10 20:57:31.176 - debug: semp.0 (52599) gateway stopped...
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.720 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:31.721 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled

Rene_HM

@webwanze Das log sieht eigentlich gut aus, trotzdem funktioniert das ganze bei dir nicht. :-(
Ich habe nochmal ein paar logs hinzugefügt. Kannst du bitte nochmal von github (wie oben) installieren?

Webwanze

@rene_hm

Hallo,

die Instanz wird jetzt grün:

2023-03-11 09:55:55.393 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-11 09:55:55.426 - info: host.ioBroker instance system.adapter.semp.0 started with pid 53629
2023-03-11 09:55:56.057 - debug: semp.0 (53629) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-11 09:55:56.076 - debug: semp.0 (53629) Objects client ready ... initialize now
2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create System PubSub Client
2023-03-11 09:55:56.078 - debug: semp.0 (53629) Objects create User PubSub Client
2023-03-11 09:55:56.099 - debug: semp.0 (53629) Objects client initialize lua scripts
2023-03-11 09:55:56.103 - debug: semp.0 (53629) Objects connected to redis: 127.0.0.1:9001
2023-03-11 09:55:56.114 - debug: semp.0 (53629) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-11 09:55:56.120 - debug: semp.0 (53629) States create System PubSub Client
2023-03-11 09:55:56.121 - debug: semp.0 (53629) States create User PubSub Client
2023-03-11 09:55:56.128 - debug: semp.0 (53629) States connected to redis: 127.0.0.1:9000
2023-03-11 09:55:56.154 - debug: semp.0 (53629) Plugin sentry Initialize Plugin (enabled=true)
2023-03-11 09:55:56.299 - info: semp.0 (53629) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#6225ab9cb4be90b2b25f1f20179f6e884e287309) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-11 09:55:56.317 - debug: semp.0 (53629) SSDPServer created: http://192.168.1.2:9765/description.xml ba7895e3-74c6-47ee-a912-e544105b6f50
2023-03-11 09:55:56.322 - debug: semp.0 (53629) SEMPServer created
2023-03-11 09:55:56.322 - debug: semp.0 (53629) gateway created...
2023-03-11 09:55:56.325 - debug: semp.0 (53629) SEMP server listening on 9765
2023-03-11 09:55:56.328 - debug: semp.0 (53629) SSDPServer started
2023-03-11 09:55:56.328 - debug: semp.0 (53629) gateway started...
2023-03-11 09:55:56.328 - debug: semp.0 (53629) Started all!
2023-03-11 09:55:56.328 - debug: semp.0 (53629) add device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-11 09:55:56.329 - debug: semp.0 (53629) add device F-0-000000000001-00
2023-03-11 09:55:56.330 - error: semp.0 (53629) newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz
2023-03-11 09:55:56.330 - debug: semp.0 (53629) can use optional energy: false
2023-03-11 09:55:56.330 - debug: semp.0 (53629) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-11 09:55:56.332 - info: semp.0 (53629) device created F-0-000000000001-00 newDevice0
2023-03-11 09:55:56.333 - debug: semp.0 (53629) set device
2023-03-11 09:55:56.333 - debug: semp.0 (53629) newDevice0 setState On
2023-03-11 09:55:56.334 - debug: semp.0 (53629) UpdateData
2023-03-11 09:55:56.334 - debug: semp.0 (53629) device {"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-11 09:55:56.334 - debug: semp.0 (53629) result [{"IsActive":true,"ID":"F-0-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-11 09:55:56.348 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:55:56.350 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State
2023-03-11 09:55:56.351 - error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State
2023-03-11 09:55:56.354 - debug: semp.0 (53629) newDevice0 got null from Devices.newDevice0.State
2023-03-11 09:55:56.355 - error: semp.0 (53629) newDevice0 could not set state on on Devices.newDevice0.State
2023-03-11 09:55:56.357 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"recommended state from SHM","type":"boolean","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926725,"_id":"semp.0.Devices.newDevice0.RecommendedState","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.381 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"last time recommendation changed","type":"string","role":"value.time","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926734,"_id":"semp.0.Devices.newDevice0.Changed","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.385 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"current State","type":"string","role":"state","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926738,"_id":"semp.0.Devices.newDevice0.State","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:56.386 - debug: semp.0 (53629) newDevice0 got object {"type":"state","common":{"name":"Energy used","type":"number","unit":"Wh","role":"value","read":true,"write":false},"from":"system.adapter.semp.0","user":"system.user.admin","ts":1678524926744,"_id":"semp.0.Devices.newDevice0.Energy","acl":{"object":1636,"state":1636,"owner":"system.user.admin","ownerGroup":"system.group.administrator"}}
2023-03-11 09:55:59.376 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:55:59.377 - info: semp.0 (53629) adapter discovered by SHM
2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:00.033 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524956349 = 0.11973000000000002Wh
2023-03-11 09:56:15.007 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:15.008 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524960033 = 0.6064175Wh
2023-03-11 09:56:16.376 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 setLastPower 117 number AlwaysOn W
2023-03-11 09:56:30.009 - debug: semp.0 (53629) newDevice0 calc energy 117 1678524975008 = 1.09395Wh
2023-03-11 09:56:36.377 - debug: semp.0 (53629) SHM requested description
2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 setLastPower 122 number AlwaysOn W
2023-03-11 09:56:45.007 - debug: semp.0 (53629) newDevice0 calc energy 122 1678524990009 = 1.6022155555555555Wh

Bei den Objekten finden sich immer noch die (null)s.

Danke für deine Unterstützung!!!

Rene_HM

@webwanze sagte in Adapter: SMA SEMP:

error: semp.0 (53629) newDevice0 could not set state waiting on Devices.newDevice0.State

Der Fehler ist noch nicht behoben, nur ignoriert. Ich schaue das log nochmal genauer an. Irgendetwas passt noch nicht...

newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz

und den Fehler darfst du auch nicht ignorieren...

Webwanze

@rene_hm sagte in Adapter: SMA SEMP:

newDevice0 wrong device id F-0-000000000001-00! must follow F-xxxxxxxx-yyyyyyyyyyyy-zz

und den Fehler darfst du auch nicht ignorieren...

Ich habe da nichts geändert. Die ID wurde beim Hinzufügen des Devices automatisch generiert. Habe es aber jetzt mal geändert. Macht natürlich keinen Unterschied.

Über Java-Script
setState("semp.0.Devices.newDevice0.State", "test")
kann ich den State übrigens ändern.

Rene_HM

@webwanze sagte in Adapter: SMA SEMP:

Macht natürlich keinen Unterschied.

für o.g. Problem macht es keinen Unterschied, funktionell ist das wichtig.

Webwanze

@rene_hm
Ich habe noch etwas herumgespielt und auch was herausgefunden:

Adapter installieren
Device anlegen
-> kein Update State

Host neu starten
-> kein Update State

State von Hand oder Script ändern
-> Fehler verschwunden, allerdings wird mein String "test" nicht upgedated
-> ich nehme an, weil sich der State für die Instanz nicht geändert hat, erfolgt kein Update. OK.

Instanz neu starten
-> Alles i.O.
-> State wird auf "on" gesetzt.

Webwanze

Wenn ich nun ein weiteres Device hinzufüge, wird der State ebenfalls nicht upgedated.
State von Hand auf z.B. "off" setzen.
Instanz neu starten

funktioniert.

Die Were für "Changed" und "RecommendedState" werden übrigens nicht gesetzt. Evtl. wird das auch nicht von der Instanz versucht ...

Rene_HM

@webwanze sagte in Adapter: SMA SEMP:

Die Werte für "Changed" und "RecommendedState" werden übrigens nicht gesetzt

Die werden erst gesetzt, wenn eine Energieanforderung vom SHM beantwortet wurde. Solange du dein Gerät auf "immer an" hast und keine Energieanforderung stellst, reagiert der SHM nicht. Das Gerät wird dann nur im Portal dargestellt und zur Berechnung der Prognose herangezogen...

Rene_HM

@webwanze sagte in Adapter: SMA SEMP:

State von Hand auf z.B. "off" setzen.
Instanz neu starten
funktioniert.

Habe die Reihenfolge des startups vom Adapter geändert. Außerdem schreibe ich jetzt default-Werte auf die DP. Hoffe, das löst das Problem...

Community Forum

NEWS

Adapter: SMA SEMP

Support us

792

32.5k

81.6k

1.3m