Weihnachtsangebot 2025! 🎄

[cb187]

@Rene_HM

das zeigt er mir in der Monatsübersicht an.Komisch weil wenn das Auto lädt zeigt er es beim Verbrauch richtig an.

[Rene_HM]

@cb187 bei mir stimmt es:

ist das nur in der Monatsansicht so (Tagesansicht)? Ich habe mir deine alten logs angeschaut, da wird die AveragePower positiv versendet, sollte also passen... Habe aktuell keine Erklärung für die negative Werte in deiner Anzeige...

[cb187]

@rene_hm ja komischerweise nur in der Monats Ansicht.Wenn du den dummy benutzt und Watt sendest müsste es ja bei dir auch sein.

[cb187]

@Rene_HM mega Phasenumschaltung funktioniert:blush: :+1: :+1:

Und im Sunnyportal scheint er es jetzt auch richtig dazu zuzählen.

[q_doc]

@q_doc

:man-facepalming: es kann so einfach sein...

nun läuft der Shelly/Trockner perfekt.

[cb187]

@q_doc said in Adapter: SMA SEMP:

@q_doc

:man-facepalming: es kann so einfach sein...

nun läuft der Shelly/Trockner perfekt.

Da haste aber lange gesucht🤣🤣

[Wildfire0815]

@q_doc said in Adapter: SMA SEMP:

@q_doc

:man-facepalming: es kann so einfach sein...

nun läuft der Shelly/Trockner perfekt.

Wo hast Du das denn gefunden? Ich habe den iobrocker auch auf der Synology in Docker laufen. Der SHM erkennt zwar das Gateway

EM-Gateway gefunden: SEMP, Name: ioBroker Gat

, aber er findet kein neues Gerät.

esponse xml <?xml version="1.0" encoding="utf-8"?> <Device2EM xmlns="http://www.sma.de/DeviceCommunication/SEMP"> <DeviceInfo> <Identification> <DeviceId>F-6542680-000000000001-00</DeviceId> <DeviceName>Wärmepumpe</DeviceName> <DeviceType>HeatPump</DeviceType> <DeviceSerial>WPM6</DeviceSerial> <DeviceVendor>Dimplex</DeviceVendor> </Identification> <Characteristics> <MaxPowerConsumption>3500</MaxPowerConsumption> <MinOnTime>600</MinOnTime> <MaxOnTime>100000</MaxOnTime> <MinOffTime>600</MinOffTime> <MaxOffTime>100000</MaxOffTime> </Characteristics> <Capabilities> <CurrentPower> <Method>Measurement</Method> </CurrentPower> <Timestamps> <AbsoluteTimestamps>false</AbsoluteTimestamps> </Timestamps> <Interruptions> <InterruptionsAllowed>true</InterruptionsAllowed> </Interruptions> <Requests> <OptionalEnergy>true</OptionalEnergy> </Requests> </Capabilities> </DeviceInfo> <DeviceStatus> <DeviceId>F-6542680-000000000001-00</DeviceId> <EMSignalsAccepted>true</EMSignalsAccepted> <Status>On</Status> <PowerConsumption> <PowerInfo> <AveragePower>2747</AveragePower> <Timestamp>0</Timestamp> <AveragingInterval>60</AveragingInterval> </PowerInfo> </PowerConsumption> </DeviceStatus> <PlanningRequest> <Timeframe> <TimeframeId>1</TimeframeId> <DeviceId>F-6542680-000000000001-00</DeviceId> <EarliestStart>0</EarliestStart> <LatestEnd>6235</LatestEnd> <MinRunningTime>0</MinRunningTime> <MaxRunningTime>71880</MaxRunningTime> </Timeframe> </PlanningRequest> </Device2EM>

Hat jemand eine Idee?

[Rene_HM]

@wildfire0815

Das kommt nicht im Portal?
o.g. Problem mit Docker ist nicht dein Problem, da der SHM bereits dein iobroker-Semp-Gateway kennt und nach Geräten fragt. Die Antwort sieht eigentlich auch nicht verkehrt aus...

[Wildfire0815]

@rene_hm Leider nicht.

Wo würde ich denn den Hinweis finden, wenn die Nummer des Gerätes schon vergeben wäre? Kann es daran liegen?

Ich bin etwas ratlos.

[Rene_HM]

@wildfire0815 ändere doch einfach die Nummer nach dem "F-".

Außerdem könntest du noch das log vom SHM selbst anschauen.

• Kopieren des "SMA Connection Assist" von https://github.com/rg-engineering/ioBroker.semp/tree/master/docu/SMA/connection-assist.jar auf den Windows-PC und irgendwohin speichern

• dann eine Eingabe -Aufforderung öffnen, in das Verzeichnis wechseln, wo die jar-Datei gespeichert wurde und

connection-assist.jar -discoverHoman

aufrufen.

• das öffnet ein Browser-Fenster
• die SMA Geräte werden gesucht
  
• den SHM auswählen und verbinden
• als Passwort den RID eingeben (SHM2)
• Systemstatus speichern
  

• als smasl Datei speichern und nach zip umbenenennen (Achtung! Pfad merken, wohin gespeichert wurde)

• in der zip ist dann ein SEMPLog.tgz
• das SEMPLog.tgz entpacken
• dort sind dann 5 logs der letzten 5 Stunden

Vielleicht finden wir ja da einen Hinweis.

[Wildfire0815]

@rene_hm said in Adapter: SMA SEMP:

connection-assist.jar -discoverHoman

Das hat geholfen. Danke für Deine Mühe.
Der vorgeschlagene Wert für die Basis ID hatte bei mir nur 7 Zeichen. Das hatte ich nicht übrüft.
In dem LOG kam dann die Meldung "Invalid ID".

[Rene_HM]

@wildfire0815 sagte in Adapter: SMA SEMP:

Basis ID hatte bei mir nur 7 Zeichen

das habe ich auch übersehen, sorry.

[Webwanze]

Hallo,

ich habe die aktuelle Version des Adapters auf meinem iobroker. V 0.3.1

Nach der Erstellung der Instanz läuft diese wie gewünscht. Grün.

Nachdem ich auch nur ein Device erstellt habe, ist das leider nicht mehr der Fall. Folgende Meldung im Log:

Habe den Adapter auch schon deinstalliert/installiert, löst das Problem aber nicht.

Grüße,

Thomas

[cb187]

@webwanze

Würde mal behaupten das es an deinem erstellen device liegt er kann den datenpunkt nicht lesen.so verstehe ich das.

[Rene_HM]

@webwanze Die Fehlermeldung sagt, dass auf einen Datenpunkt, den der Adapter eigentlich anlegt, nicht zugegriffen werden kann...

Zeige mal den Datenbaum für dein neues Device. Der sollte irgendwie so aussehen:

Bei dir fehlt wohl der State...
Wie heisst dein device? sind da evtl. Leerzeichen drin?

[Webwanze]

@rene_hm
Datenpunkt passt. Mit State usw.
Leerzeichen gibt es auch nicht.
Auch wenn ich auf 'Schätzung' stelle, kommt der Fehler. Also ohne jeglichen Datenpunkte.

Nochmal zum Reproduzieren:
Ausgangssituation:

• Adapter installiert und Basiseinstellungen (IP, Port, ...) OK.
• Kein Device konfiguriert
  -> Läuft!

Hinzufügen eines Devices:

• '+' klicken
• ID: F-00...-00...1-00 lassen
• Name: newDevice0 lassen
• Speichern
  -> Läuft nicht mehr.

Zurück zur Konfiguration des Devices:

• Hersteller=ACME/Seriennummer=1234/Gerätetyp=Heizung/Mindestleistung=0;max. Leistung 1000; Unterbrechung erlaubt=Nein
• Zähler=Schätzung
• Schalter=Immer an; Gerät kann ein/ausgeschaltet werden=Nein
• Energieanforderungen aktiv = Nein
  -> Läuft nicht

Habe auch versucht, alle möglichen Datenpunkte im Device zu setzen, falls der Adapter dort Daten holen will, auch wenn die Funktionalität eigentlich deaktiviert ist. Egal was ich einstelle, es funktioniert nicht. Sobald ich das gesamte Device deaktiviere (Checkbox) läuft der Adapter wieder.

Nachtrag:
In den Objekten werden wie bei deinem Screenshot alle Datenpunkte angezeigt:
Changed = null
Energy = 0 Wh
RecommendedState = null
State = null

[Rene_HM]

@webwanze sagte in Adapter: SMA SEMP:

State = null

und da sehen wir das Problem. Der Adapter versucht "waiting" dorthin zu schreiben, null sollte da nicht stehen...

Kopiere mal den kompletten Namen dieses Datenpunktes und poste ihn hier oder mache einen screen shot wie ich ihn gezeigt habe.

[Webwanze]

@rene_hm

Muss bei mir da auch 'waiting' stehen?
Ich will ja nicht über semp steuern lassen. Also wartet bei mir auch nix - zumindest nicht auf den HM2.

[Rene_HM]

@webwanze ja, da wird auch "waiting" stehen, weil das der Standard-Zustand ist.

Ich sehe den Absturz auch im sentry (36 mal heute, 28 mal gestern, aber nur bei dir) , kann es mir aber noch nicht erklären.
Ich habe mal eine kleine Änderung eingebaut und auf github hochgeladen. Kannst du den Adapter von https://github.com/rg-engineering/ioBroker.semp installieren und debug-loglevel einschalten? Vielleicht sehen wir dann etwas mehr im log...

[Webwanze]

@rene_hm

2023-03-10 20:56:58.669 - info: host.ioBroker "system.adapter.semp.0" enabled
2023-03-10 20:56:58.704 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52584
2023-03-10 20:56:59.337 - debug: semp.0 (52584) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:56:59.359 - debug: semp.0 (52584) Objects client ready ... initialize now
2023-03-10 20:56:59.360 - debug: semp.0 (52584) Objects create System PubSub Client
2023-03-10 20:56:59.361 - debug: semp.0 (52584) Objects create User PubSub Client
2023-03-10 20:56:59.375 - debug: semp.0 (52584) Objects client initialize lua scripts
2023-03-10 20:56:59.379 - debug: semp.0 (52584) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:56:59.390 - debug: semp.0 (52584) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:56:59.395 - debug: semp.0 (52584) States create System PubSub Client
2023-03-10 20:56:59.396 - debug: semp.0 (52584) States create User PubSub Client
2023-03-10 20:56:59.403 - debug: semp.0 (52584) States connected to redis: 127.0.0.1:9000
2023-03-10 20:56:59.428 - debug: semp.0 (52584) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:56:59.609 - info: semp.0 (52584) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:56:59.627 - debug: semp.0 (52584) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:56:59.632 - debug: semp.0 (52584) SEMPServer created
2023-03-10 20:56:59.632 - debug: semp.0 (52584) gateway created...
2023-03-10 20:56:59.635 - debug: semp.0 (52584) SEMP server listening on 9765
2023-03-10 20:56:59.638 - debug: semp.0 (52584) SSDPServer started
2023-03-10 20:56:59.638 - debug: semp.0 (52584) gateway started...
2023-03-10 20:56:59.638 - debug: semp.0 (52584) Started all!
2023-03-10 20:56:59.638 - debug: semp.0 (52584) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:56:59.639 - debug: semp.0 (52584) add device F-00000000-000000000001-00
2023-03-10 20:56:59.640 - debug: semp.0 (52584) can use optional energy: false
2023-03-10 20:56:59.640 - debug: semp.0 (52584) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:56:59.642 - info: semp.0 (52584) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:56:59.643 - debug: semp.0 (52584) set device
2023-03-10 20:56:59.643 - debug: semp.0 (52584) newDevice0 setState On
2023-03-10 20:56:59.644 - debug: semp.0 (52584) UpdateData
2023-03-10 20:56:59.644 - debug: semp.0 (52584) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:56:59.644 - debug: semp.0 (52584) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:56:59.655 - debug: semp.0 (52584) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:56:59.658 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.659 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.659 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.663 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:56:59.663 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.676 - debug: semp.0 (52584) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:56:59.677 - error: semp.0 (52584) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:56:59.677 - error: semp.0 (52584) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.678 - error: semp.0 (52584) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:56:59.679 - error: semp.0 (52584) Cannot read properties of null (reading 'val')
2023-03-10 20:56:59.683 - debug: semp.0 (52584) delete all devices
2023-03-10 20:56:59.683 - debug: semp.0 (52584) SEMP server stopped
2023-03-10 20:56:59.684 - info: semp.0 (52584) terminating
2023-03-10 20:56:59.685 - debug: semp.0 (52584) Plugin sentry destroyed
2023-03-10 20:56:59.685 - warn: semp.0 (52584) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:56:59.689 - debug: semp.0 (52584) SSDPServer stopped
2023-03-10 20:56:59.689 - debug: semp.0 (52584) gateway stopped...
2023-03-10 20:57:00.225 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:00.226 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:00.226 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:00.226 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled
2023-03-10 20:57:30.259 - info: host.ioBroker instance system.adapter.semp.0 started with pid 52599
2023-03-10 20:57:30.854 - debug: semp.0 (52599) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-03-10 20:57:30.877 - debug: semp.0 (52599) Objects client ready ... initialize now
2023-03-10 20:57:30.878 - debug: semp.0 (52599) Objects create System PubSub Client
2023-03-10 20:57:30.879 - debug: semp.0 (52599) Objects create User PubSub Client
2023-03-10 20:57:30.895 - debug: semp.0 (52599) Objects client initialize lua scripts
2023-03-10 20:57:30.898 - debug: semp.0 (52599) Objects connected to redis: 127.0.0.1:9001
2023-03-10 20:57:30.911 - debug: semp.0 (52599) Redis States: Use Redis connection: 127.0.0.1:9000
2023-03-10 20:57:30.916 - debug: semp.0 (52599) States create System PubSub Client
2023-03-10 20:57:30.917 - debug: semp.0 (52599) States create User PubSub Client
2023-03-10 20:57:30.925 - debug: semp.0 (52599) States connected to redis: 127.0.0.1:9000
2023-03-10 20:57:30.948 - debug: semp.0 (52599) Plugin sentry Initialize Plugin (enabled=true)
2023-03-10 20:57:31.103 - info: semp.0 (52599) starting. Version 0.3.1 (non-npm: rg-engineering/ioBroker.semp#dedf941c7e0615cb00f7c78d6024a7b4a006eb1a) in /opt/iobroker/node_modules/iobroker.semp, node: v16.19.0, js-controller: 4.0.24
2023-03-10 20:57:31.121 - debug: semp.0 (52599) SSDPServer created: http://192.168.1.2:9765/description.xml e27c0561-11b3-47b8-a98a-006d408b0dd1
2023-03-10 20:57:31.125 - debug: semp.0 (52599) SEMPServer created
2023-03-10 20:57:31.126 - debug: semp.0 (52599) gateway created...
2023-03-10 20:57:31.129 - debug: semp.0 (52599) SEMP server listening on 9765
2023-03-10 20:57:31.132 - debug: semp.0 (52599) SSDPServer started
2023-03-10 20:57:31.132 - debug: semp.0 (52599) gateway started...
2023-03-10 20:57:31.132 - debug: semp.0 (52599) Started all!
2023-03-10 20:57:31.132 - debug: semp.0 (52599) add device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}]}
2023-03-10 20:57:31.133 - debug: semp.0 (52599) add device F-00000000-000000000001-00
2023-03-10 20:57:31.134 - debug: semp.0 (52599) can use optional energy: false
2023-03-10 20:57:31.134 - debug: semp.0 (52599) subscribe OID_Power 0_userdata.0.DEVICES.ECENTRALHEATING_P
2023-03-10 20:57:31.136 - info: semp.0 (52599) device created F-00000000-000000000001-00 newDevice0
2023-03-10 20:57:31.137 - debug: semp.0 (52599) set device
2023-03-10 20:57:31.137 - debug: semp.0 (52599) newDevice0 setState On
2023-03-10 20:57:31.137 - debug: semp.0 (52599) UpdateData
2023-03-10 20:57:31.138 - debug: semp.0 (52599) device {"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}]
2023-03-10 20:57:31.138 - debug: semp.0 (52599) result [{"IsActive":true,"ID":"F-00000000-000000000001-00","Name":"newDevice0","Vendor":"ACME","Type":"Heater","SerialNr":"1234","MaxPower":"1000","MinPower":"0","InterruptionsAllowed":false,"MinOnTime":"","MaxOnTime":"","MinOffTime":"","MaxOffTime":"","MeasurementMethod":"Measurement","OID_Power":"0_userdata.0.DEVICES.ECENTRALHEATING_P","MeasurementUnit":"W","BatteryCapacity":"","WallboxHas3phaseEnabler":false,"StatusDetection":"AlwaysOn","StatusDetectionLimit":0,"StatusDetectionLimitTimeOn":0,"StatusDetectionLimitTimeOff":0,"StatusDetectionMinRunTime":0,"OID_Status":"","HasOIDSwitch":false,"OID_Switch":"","SwitchOffAtEndOfTimer":false,"TimerActive":false,"TimerCancelIfNotOn":false,"TimerCancelIfNotOnTime":0,"EnergyRequestPeriods":[{"ID":"1","Days":"","EarliestStartTime":"","LatestEndTime":"","MinRunTime":"","MaxRunTime":""}],"WallboxOIDs":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsCharging","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDIsError","OID":"","Type":"Boolean","SetValue":"true"},{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"","Type":"Number","SetValue":"0"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"","Type":"Boolean","SetValue":"true"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"","Type":"Boolean","SetValue":"true"}],"OptionalEnergy":false}]
2023-03-10 20:57:31.148 - debug: semp.0 (52599) newDevice0 setLastPower 33 number AlwaysOn W
2023-03-10 20:57:31.150 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.151 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.151 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.154 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.154 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.166 - debug: semp.0 (52599) newDevice0 got null from Devices.newDevice0.State
2023-03-10 20:57:31.166 - error: semp.0 (52599) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-03-10 20:57:31.166 - error: semp.0 (52599) unhandled promise rejection: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.167 - error: semp.0 (52599) TypeError: Cannot read properties of null (reading 'val')
at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
at runNextTicks (node:internal/process/task_queues:61:5)
at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.168 - error: semp.0 (52599) Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.171 - debug: semp.0 (52599) delete all devices
2023-03-10 20:57:31.171 - debug: semp.0 (52599) SEMP server stopped
2023-03-10 20:57:31.172 - info: semp.0 (52599) terminating
2023-03-10 20:57:31.172 - debug: semp.0 (52599) Plugin sentry destroyed
2023-03-10 20:57:31.172 - warn: semp.0 (52599) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-03-10 20:57:31.175 - debug: semp.0 (52599) SSDPServer stopped
2023-03-10 20:57:31.176 - debug: semp.0 (52599) gateway stopped...
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[1]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: TypeError: Cannot read properties of null (reading 'val')
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at Device.SetState (/opt/iobroker/node_modules/iobroker.semp/lib/semp/Device.js:1052:30)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at runNextTicks (node:internal/process/task_queues:61:5)
2023-03-10 20:57:31.720 - error: host.ioBroker Caught by controller[2]: at processImmediate (node:internal/timers:437:9)
2023-03-10 20:57:31.720 - error: host.ioBroker instance system.adapter.semp.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-03-10 20:57:31.721 - info: host.ioBroker Restart adapter system.adapter.semp.0 because enabled