Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Visualisierung
  4. Linux/Debian - Grafana-Repo muss aktualisiert werden

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.5k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.1k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    2.8k

Linux/Debian - Grafana-Repo muss aktualisiert werden

Geplant Angeheftet Gesperrt Verschoben Visualisierung
146 Beiträge 22 Kommentatoren 39.1k Aufrufe 22 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • M Marty56

    @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

    Thomas BraunT Online
    Thomas BraunT Online
    Thomas Braun
    Most Active
    schrieb am zuletzt editiert von Thomas Braun
    #46

    @marty56 sagte in Linux/Debian - Grafana-Repo muss aktualisiert werden:

    Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

    Dann lass es bleiben und nerv andere nicht mit deinem Unwillen dich damit zu beschäftigen.

    Ich z.B. habe überhaupt keinen Bock so triviales Zeug Leuten zu erklären die es nicht wissen wollen. Setz besser ein Windows ein.

    Das Repo ist nach der obigen Anleitung und mit ein wenig Nachdenken in Nullkommanix richtig umgestellt. Hat gestern bei mir keine 10 Sekunden gedauert. Da war nix 'zu frickeln'.

    Linux-Werkzeugkasten:
    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
    NodeJS Fixer Skript:
    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

    1 Antwort Letzte Antwort
    1
    • M Marty56

      @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

      ChaotC Offline
      ChaotC Offline
      Chaot
      schrieb am zuletzt editiert von
      #47

      @marty56 Ich verstehe dein Problem nicht.
      Ich musste mich beim Übergang von win 3.1 auf Win 95 komplett neu damit befassen. Dann kam Win2000 was auch viele Eigenheiten hatte und dann die Umstellung auf Win7. Auch hier musste einiges komplett neu erlernt werden.
      Warum ist das bei Windows ok, aber bei Linux plötzlich böse?
      Wenn ich eine Software nutze muss ich mich halt damit beschäftigen damit ich sie richtig einsetzen kann. Das war schon bei PC-DOS so und wird auch bei Win 25 irgendwann so bleiben.
      Und Frickelkönig? Dann hast du noch nie einen Windows Server bearbeitet.

      ioBroker auf NUC unter Proxmox; VIS: 12" Touchscreen und 17" Touch; Lichtsteuerung, Thermometer und Sensoren: Tasmota (39); Ambiente Beleuchtung: WLED (9); Heizung: DECT Thermostate (9) an Fritz 6690; EMS-ESP; 1 Echo V2; 3 Echo DOT; 1 Echo Connect; 2 Echo Show 5; Unifi Ap-Ac Lite.

      1 Antwort Letzte Antwort
      0
      • ? Offline
        ? Offline
        Ein ehemaliger Benutzer
        schrieb am zuletzt editiert von
        #48

        Moin,

        lasst doch gut sein, es geht hier nur darum Grafana und zwischendurch auch mal influxDB nach der Singnaturänderung wieder ans Laufen zu bringen, alles andere ist vergebene Liebesmüh und bring hier gar nichts :)

        VG
        Bernd

        M 1 Antwort Letzte Antwort
        3
        • ? Ein ehemaliger Benutzer

          Moin,

          lasst doch gut sein, es geht hier nur darum Grafana und zwischendurch auch mal influxDB nach der Singnaturänderung wieder ans Laufen zu bringen, alles andere ist vergebene Liebesmüh und bring hier gar nichts :)

          VG
          Bernd

          M Offline
          M Offline
          Marty56
          schrieb am zuletzt editiert von
          #49

          @dp20eic ganz meiner Meinung. Sorry, dass ich vom Thema abgewichen bin.

          HW:NUC (16 GB Ram)
          OS: Debian Bullseye, Promox V7, node v16.x npm 8.19.3

          1 Antwort Letzte Antwort
          0
          • Thomas BraunT Thomas Braun

            @lessthanmore

            Key löschen. Geht wie oben:

            sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
            

            Die /etc/apt/sources.list.d/influxdata.list löschen.
            Aktuelles Setup für influxdb:

            wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
            export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
            echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
            
            S Offline
            S Offline
            shellyrulestheworld
            schrieb am zuletzt editiert von
            #50

            @thomas-braun
            Vielen Dank für deine Beiträge. Hab auch versucht influxdb umzustellen, wie von dir beschrieben.

            
            Err:7 https://repos.influxdata.com/debian bullseye InRelease
              The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
            Fetched 7,022 B in 3s (2,530 B/s)
            Reading package lists... Done
            Building dependency tree... Done
            Reading state information... Done
            All packages are up to date.
            W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
            W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
            W: Some index files failed to download. They have been ignored, or old ones used instead.
            
            

            klappt aber leider nicht. Hab ich was vergessen?
            mein vorgehen war folgendes:

            apt-key list | grep -i influxdb | wc -l
            Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
            0
            sudo rm influxdb.list
            wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
            export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
            echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
            
            
            Thomas BraunT 1 Antwort Letzte Antwort
            0
            • S shellyrulestheworld

              @thomas-braun
              Vielen Dank für deine Beiträge. Hab auch versucht influxdb umzustellen, wie von dir beschrieben.

              
              Err:7 https://repos.influxdata.com/debian bullseye InRelease
                The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              Fetched 7,022 B in 3s (2,530 B/s)
              Reading package lists... Done
              Building dependency tree... Done
              Reading state information... Done
              All packages are up to date.
              W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              W: Some index files failed to download. They have been ignored, or old ones used instead.
              
              

              klappt aber leider nicht. Hab ich was vergessen?
              mein vorgehen war folgendes:

              apt-key list | grep -i influxdb | wc -l
              Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
              0
              sudo rm influxdb.list
              wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
              export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
              echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
              
              
              Thomas BraunT Online
              Thomas BraunT Online
              Thomas Braun
              Most Active
              schrieb am zuletzt editiert von Thomas Braun
              #51

              @shellyrulestheworld

              ls -lA /etc/apt/sources.list.d/
              sudo apt update
              

              sagt? Vollständig posten, nix weg lassen. Auch nicht das login prompt.

              Linux-Werkzeugkasten:
              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
              NodeJS Fixer Skript:
              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

              S 1 Antwort Letzte Antwort
              0
              • Thomas BraunT Thomas Braun

                @shellyrulestheworld

                ls -lA /etc/apt/sources.list.d/
                sudo apt update
                

                sagt? Vollständig posten, nix weg lassen. Auch nicht das login prompt.

                S Offline
                S Offline
                shellyrulestheworld
                schrieb am zuletzt editiert von
                #52

                @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                ls -lA /etc/apt/sources.list.d/

                
                pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                total 24
                -rw-r--r-- 1 root root  60 Dec 23 10:10 deconz.list
                -rw-r--r-- 1 root root  84 Jan 30 14:21 grafana.list
                -rw-r--r-- 1 root root 101 Jan 30 15:05 influxdb.list
                -rw-r--r-- 1 root root 208 Dec 23 09:34 nodesource.list
                -rw-r--r-- 1 root root 398 Jan 11 16:11 ookla_speedtest-cli.list
                -rw-r--r-- 1 root root 191 Sep 22 04:50 raspi.list
                pi@raspberrypi:~ $ sudo apt update
                Hit:1 http://deb.debian.org/debian bullseye InRelease
                Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
                Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                Hit:7 https://apt.grafana.com stable InRelease
                Get:8 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
                Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease
                Err:8 https://repos.influxdata.com/debian bullseye InRelease
                  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                Fetched 7,022 B in 2s (3,282 B/s)
                Reading package lists... Done
                Building dependency tree... Done
                Reading state information... Done
                All packages are up to date.
                W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                W: Some index files failed to download. They have been ignored, or old ones used instead.
                pi@raspberrypi:~ $
                
                
                Thomas BraunT 1 Antwort Letzte Antwort
                0
                • S shellyrulestheworld

                  @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                  ls -lA /etc/apt/sources.list.d/

                  
                  pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                  total 24
                  -rw-r--r-- 1 root root  60 Dec 23 10:10 deconz.list
                  -rw-r--r-- 1 root root  84 Jan 30 14:21 grafana.list
                  -rw-r--r-- 1 root root 101 Jan 30 15:05 influxdb.list
                  -rw-r--r-- 1 root root 208 Dec 23 09:34 nodesource.list
                  -rw-r--r-- 1 root root 398 Jan 11 16:11 ookla_speedtest-cli.list
                  -rw-r--r-- 1 root root 191 Sep 22 04:50 raspi.list
                  pi@raspberrypi:~ $ sudo apt update
                  Hit:1 http://deb.debian.org/debian bullseye InRelease
                  Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                  Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
                  Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                  Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                  Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                  Hit:7 https://apt.grafana.com stable InRelease
                  Get:8 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
                  Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease
                  Err:8 https://repos.influxdata.com/debian bullseye InRelease
                    The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  Fetched 7,022 B in 2s (3,282 B/s)
                  Reading package lists... Done
                  Building dependency tree... Done
                  Reading state information... Done
                  All packages are up to date.
                  W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  W: Some index files failed to download. They have been ignored, or old ones used instead.
                  pi@raspberrypi:~ $
                  
                  
                  Thomas BraunT Online
                  Thomas BraunT Online
                  Thomas Braun
                  Most Active
                  schrieb am zuletzt editiert von Thomas Braun
                  #53

                  @shellyrulestheworld

                  sudo rm /etc/apt/sources.list.d/influxdb.list
                  wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                  echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                  echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                  sudo apt update
                  sudo apt full-upgrade
                  

                  Linux-Werkzeugkasten:
                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                  NodeJS Fixer Skript:
                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                  S H 2 Antworten Letzte Antwort
                  3
                  • Thomas BraunT Thomas Braun

                    @shellyrulestheworld

                    sudo rm /etc/apt/sources.list.d/influxdb.list
                    wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                    echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                    echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                    sudo apt update
                    sudo apt full-upgrade
                    
                    S Offline
                    S Offline
                    shellyrulestheworld
                    schrieb am zuletzt editiert von
                    #54

                    @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                    echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list

                    ein großes Dankeschön, läuft perfekt durch :-)
                    Ist wirklich ein klasse Support von dir

                    1 Antwort Letzte Antwort
                    0
                    • D Online
                      D Online
                      darkblu
                      schrieb am zuletzt editiert von
                      #55

                      und wieder eine Anfänger Frage, muss ich hier auch die beiden Schlüssel von influx löschen ?

                      pi@raspberrypi:~ $ apt-key list
                      Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                      /etc/apt/trusted.gpg
                      --------------------
                      pub   rsa2048 2012-04-01 [SC]
                            A0DA 38D0 D76E 8B5D 6388  7281 9165 938D 90FD DD2E
                      uid        [ unbekannt ] Mike Thompson (Raspberry Pi Debian armhf ARMv6+VFP) <mpthompson@gmail.com>
                      sub   rsa2048 2012-04-01 [E]
                      
                      pub   rsa2048 2012-06-17 [SC]
                            CF8A 1AF5 02A2 AA2D 763B  AE7E 82B1 2992 7FA3 303E
                      uid        [ unbekannt ] Raspberry Pi Archive Signing Key
                      sub   rsa2048 2012-06-17 [E]
                      
                      pub   rsa4096 2015-09-28 [SC]
                            05CE 1508 5FC0 9D18 E99E  FB22 684A 14CF 2582 E0C5
                      uid        [ unbekannt ] InfluxDB Packaging Service <support@influxdb.com>
                      sub   rsa4096 2015-09-28 [E]
                      
                      /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg
                      ----------------------------------------------------
                      pub   rsa4096 2023-01-18 [SC] [verfällt: 2026-01-17]
                            9D53 9D90 D332 8DC7 D6C8  D3B9 D8FF 8E1F 7DF8 B07E
                      uid        [ unbekannt ] InfluxData Package Signing Key <support@influxdata.com>
                      
                      pi@raspberrypi:~ $
                      

                      und dann

                      sudo rm /etc/apt/sources.list.d/influxdb.list
                      wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                      echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                      echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                      sudo apt update
                      sudo apt full-upgrade
                      

                      ausführen ?

                      Raspi 4, 4GB für Influxdb 1.8 und Grafana
                      Raspi 5, 8 GB für ioBroker

                      Thomas BraunT 1 Antwort Letzte Antwort
                      0
                      • D darkblu

                        und wieder eine Anfänger Frage, muss ich hier auch die beiden Schlüssel von influx löschen ?

                        pi@raspberrypi:~ $ apt-key list
                        Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                        /etc/apt/trusted.gpg
                        --------------------
                        pub   rsa2048 2012-04-01 [SC]
                              A0DA 38D0 D76E 8B5D 6388  7281 9165 938D 90FD DD2E
                        uid        [ unbekannt ] Mike Thompson (Raspberry Pi Debian armhf ARMv6+VFP) <mpthompson@gmail.com>
                        sub   rsa2048 2012-04-01 [E]
                        
                        pub   rsa2048 2012-06-17 [SC]
                              CF8A 1AF5 02A2 AA2D 763B  AE7E 82B1 2992 7FA3 303E
                        uid        [ unbekannt ] Raspberry Pi Archive Signing Key
                        sub   rsa2048 2012-06-17 [E]
                        
                        pub   rsa4096 2015-09-28 [SC]
                              05CE 1508 5FC0 9D18 E99E  FB22 684A 14CF 2582 E0C5
                        uid        [ unbekannt ] InfluxDB Packaging Service <support@influxdb.com>
                        sub   rsa4096 2015-09-28 [E]
                        
                        /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg
                        ----------------------------------------------------
                        pub   rsa4096 2023-01-18 [SC] [verfällt: 2026-01-17]
                              9D53 9D90 D332 8DC7 D6C8  D3B9 D8FF 8E1F 7DF8 B07E
                        uid        [ unbekannt ] InfluxData Package Signing Key <support@influxdata.com>
                        
                        pi@raspberrypi:~ $
                        

                        und dann

                        sudo rm /etc/apt/sources.list.d/influxdb.list
                        wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                        echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                        echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                        sudo apt update
                        sudo apt full-upgrade
                        

                        ausführen ?

                        Thomas BraunT Online
                        Thomas BraunT Online
                        Thomas Braun
                        Most Active
                        schrieb am zuletzt editiert von
                        #56

                        @darkblu

                        Ja, die Schlüssel sollten aus apt-key raus.
                        Ob du dann das Repo anlegen musst hängt vom jetzigen Setup ab.

                        Linux-Werkzeugkasten:
                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                        NodeJS Fixer Skript:
                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                        D 1 Antwort Letzte Antwort
                        0
                        • Thomas BraunT Thomas Braun

                          @darkblu

                          Ja, die Schlüssel sollten aus apt-key raus.
                          Ob du dann das Repo anlegen musst hängt vom jetzigen Setup ab.

                          D Online
                          D Online
                          darkblu
                          schrieb am zuletzt editiert von
                          #57

                          @thomas-braun
                          Wie finde ich denn raus, ob ich das Repo anlegen muss, bzw. welches Setup ich habe ?
                          Sorry für meine Unwissenheit.

                          Raspi 4, 4GB für Influxdb 1.8 und Grafana
                          Raspi 5, 8 GB für ioBroker

                          wendy2702W 1 Antwort Letzte Antwort
                          0
                          • D darkblu

                            @thomas-braun
                            Wie finde ich denn raus, ob ich das Repo anlegen muss, bzw. welches Setup ich habe ?
                            Sorry für meine Unwissenheit.

                            wendy2702W Online
                            wendy2702W Online
                            wendy2702
                            schrieb am zuletzt editiert von
                            #58

                            @darkblu Guckst du hier: https://forum.iobroker.net/post/937984

                            Bitte keine Fragen per PN, die gehören ins Forum!

                            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                            1 Antwort Letzte Antwort
                            0
                            • D Online
                              D Online
                              darkblu
                              schrieb am zuletzt editiert von
                              #59

                              sodele,

                              ls -lA /etc/apt/sources.list.d/
                              sudo apt update
                              

                              sagt:

                              pi@raspberrypi:~ $ sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
                              Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                              OK
                              pi@raspberrypi:~ $ sudo apt-key del 9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E
                              Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                              OK
                              pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                              insgesamt 12
                              -rw-r--r-- 1 root root  84 30. Jan 18:31 grafana.list
                              -rw-r--r-- 1 root root 208 26. Aug 15:09 nodesource.list
                              -rw-r--r-- 1 root root 191 30. Okt 2021  raspi.list
                              pi@raspberrypi:~ $ sudo apt update
                              OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                              OK:2 https://deb.nodesource.com/node_16.x bullseye InRelease
                              OK:3 https://apt.grafana.com stable InRelease
                              OK:4 http://archive.raspberrypi.org/debian bullseye InRelease
                              Paketlisten werden gelesen… Fertig
                              Abhängigkeitsbaum wird aufgebaut… Fertig
                              Statusinformationen werden eingelesen… Fertig
                              Alle Pakete sind aktuell.
                              

                              wenn ich es richtig verstanden habe, bin ich dann endlich am Ziel und muss nix mehr machen :anguished: ?

                              also das hier (nicht machen):

                              sudo rm /etc/apt/sources.list.d/influxdb.list
                              wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                              echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                              echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                              sudo apt update
                              sudo apt full-upgrade
                              

                              Raspi 4, 4GB für Influxdb 1.8 und Grafana
                              Raspi 5, 8 GB für ioBroker

                              Thomas BraunT 1 Antwort Letzte Antwort
                              0
                              • D darkblu

                                sodele,

                                ls -lA /etc/apt/sources.list.d/
                                sudo apt update
                                

                                sagt:

                                pi@raspberrypi:~ $ sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
                                Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                OK
                                pi@raspberrypi:~ $ sudo apt-key del 9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E
                                Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                OK
                                pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                                insgesamt 12
                                -rw-r--r-- 1 root root  84 30. Jan 18:31 grafana.list
                                -rw-r--r-- 1 root root 208 26. Aug 15:09 nodesource.list
                                -rw-r--r-- 1 root root 191 30. Okt 2021  raspi.list
                                pi@raspberrypi:~ $ sudo apt update
                                OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                OK:2 https://deb.nodesource.com/node_16.x bullseye InRelease
                                OK:3 https://apt.grafana.com stable InRelease
                                OK:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                Paketlisten werden gelesen… Fertig
                                Abhängigkeitsbaum wird aufgebaut… Fertig
                                Statusinformationen werden eingelesen… Fertig
                                Alle Pakete sind aktuell.
                                

                                wenn ich es richtig verstanden habe, bin ich dann endlich am Ziel und muss nix mehr machen :anguished: ?

                                also das hier (nicht machen):

                                sudo rm /etc/apt/sources.list.d/influxdb.list
                                wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                sudo apt update
                                sudo apt full-upgrade
                                
                                Thomas BraunT Online
                                Thomas BraunT Online
                                Thomas Braun
                                Most Active
                                schrieb am zuletzt editiert von
                                #60

                                @darkblu

                                Da ist kein Repo für influxdb angelegt.
                                Also wirst du das tun müssen, wenn influxdb verwendet werden soll.

                                Linux-Werkzeugkasten:
                                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                NodeJS Fixer Skript:
                                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                D 1 Antwort Letzte Antwort
                                0
                                • Thomas BraunT Thomas Braun

                                  @darkblu

                                  Da ist kein Repo für influxdb angelegt.
                                  Also wirst du das tun müssen, wenn influxdb verwendet werden soll.

                                  D Online
                                  D Online
                                  darkblu
                                  schrieb am zuletzt editiert von
                                  #61

                                  @thomas-braun
                                  ey ey Sir
                                  hier die Ausgabe:

                                  pi@raspberrypi:~ $ iob stop
                                  pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/influxdb.list
                                  rm: das Entfernen von '/etc/apt/sources.list.d/influxdb.list' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
                                  pi@raspberrypi:~ $ wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                  pi@raspberrypi:~ $ echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                  influxdata-archive_compat.key: OK
                                  pi@raspberrypi:~ $ echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                  deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main
                                  pi@raspberrypi:~ $ sudo apt update
                                  OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                  Holen:2 https://repos.influxdata.com/debian stable InRelease [6.874 B]
                                  OK:3 https://apt.grafana.com stable InRelease
                                  OK:4 https://deb.nodesource.com/node_16.x bullseye InRelease
                                  OK:5 http://archive.raspberrypi.org/debian bullseye InRelease
                                  Holen:6 https://repos.influxdata.com/debian stable/main armhf Packages [1.669 B]
                                  Es wurden 8.543 B in 1 s geholt (6.376 B/s).
                                  Paketlisten werden gelesen… Fertig
                                  Abhängigkeitsbaum wird aufgebaut… Fertig
                                  Statusinformationen werden eingelesen… Fertig
                                  Alle Pakete sind aktuell.
                                  pi@raspberrypi:~ $ sudo apt full-upgrade
                                  Paketlisten werden gelesen… Fertig
                                  Abhängigkeitsbaum wird aufgebaut… Fertig
                                  Statusinformationen werden eingelesen… Fertig
                                  Paketaktualisierung (Upgrade) wird berechnet… Fertig
                                  0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                                  pi@raspberrypi:~ $
                                  

                                  jetzt bin ich aber durch ?

                                  Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                  Raspi 5, 8 GB für ioBroker

                                  Thomas BraunT 1 Antwort Letzte Antwort
                                  0
                                  • D darkblu

                                    @thomas-braun
                                    ey ey Sir
                                    hier die Ausgabe:

                                    pi@raspberrypi:~ $ iob stop
                                    pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/influxdb.list
                                    rm: das Entfernen von '/etc/apt/sources.list.d/influxdb.list' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
                                    pi@raspberrypi:~ $ wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                    pi@raspberrypi:~ $ echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                    influxdata-archive_compat.key: OK
                                    pi@raspberrypi:~ $ echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                    deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main
                                    pi@raspberrypi:~ $ sudo apt update
                                    OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                    Holen:2 https://repos.influxdata.com/debian stable InRelease [6.874 B]
                                    OK:3 https://apt.grafana.com stable InRelease
                                    OK:4 https://deb.nodesource.com/node_16.x bullseye InRelease
                                    OK:5 http://archive.raspberrypi.org/debian bullseye InRelease
                                    Holen:6 https://repos.influxdata.com/debian stable/main armhf Packages [1.669 B]
                                    Es wurden 8.543 B in 1 s geholt (6.376 B/s).
                                    Paketlisten werden gelesen… Fertig
                                    Abhängigkeitsbaum wird aufgebaut… Fertig
                                    Statusinformationen werden eingelesen… Fertig
                                    Alle Pakete sind aktuell.
                                    pi@raspberrypi:~ $ sudo apt full-upgrade
                                    Paketlisten werden gelesen… Fertig
                                    Abhängigkeitsbaum wird aufgebaut… Fertig
                                    Statusinformationen werden eingelesen… Fertig
                                    Paketaktualisierung (Upgrade) wird berechnet… Fertig
                                    0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                                    pi@raspberrypi:~ $
                                    

                                    jetzt bin ich aber durch ?

                                    Thomas BraunT Online
                                    Thomas BraunT Online
                                    Thomas Braun
                                    Most Active
                                    schrieb am zuletzt editiert von
                                    #62

                                    @darkblu

                                    apt policy influxdb*
                                    

                                    sagt?

                                    Linux-Werkzeugkasten:
                                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                    NodeJS Fixer Skript:
                                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                    D 1 Antwort Letzte Antwort
                                    0
                                    • Thomas BraunT Thomas Braun

                                      @darkblu

                                      apt policy influxdb*
                                      

                                      sagt?

                                      D Online
                                      D Online
                                      darkblu
                                      schrieb am zuletzt editiert von
                                      #63

                                      @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                                      apt policy influxdb*

                                      sagt:

                                      pi@raspberrypi:~ $ apt policy influxdb*
                                      influxdb-client:
                                        Installiert:           (keine)
                                        Installationskandidat: 1.6.7~rc0-1
                                        Versionstabelle:
                                           1.6.7~rc0-1 500
                                              500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                      influxdb-dev:
                                        Installiert:           (keine)
                                        Installationskandidat: (keine)
                                        Versionstabelle:
                                      influxdb:
                                        Installiert:           1.8.10-1
                                        Installationskandidat: 1.8.10-1
                                        Versionstabelle:
                                       *** 1.8.10-1 500
                                              500 https://repos.influxdata.com/debian stable/main armhf Packages
                                              100 /var/lib/dpkg/status
                                           1.6.7~rc0-1 500
                                              500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                      pi@raspberrypi:~ $
                                      

                                      Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                      Raspi 5, 8 GB für ioBroker

                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • D darkblu

                                        @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                                        apt policy influxdb*

                                        sagt:

                                        pi@raspberrypi:~ $ apt policy influxdb*
                                        influxdb-client:
                                          Installiert:           (keine)
                                          Installationskandidat: 1.6.7~rc0-1
                                          Versionstabelle:
                                             1.6.7~rc0-1 500
                                                500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                        influxdb-dev:
                                          Installiert:           (keine)
                                          Installationskandidat: (keine)
                                          Versionstabelle:
                                        influxdb:
                                          Installiert:           1.8.10-1
                                          Installationskandidat: 1.8.10-1
                                          Versionstabelle:
                                         *** 1.8.10-1 500
                                                500 https://repos.influxdata.com/debian stable/main armhf Packages
                                                100 /var/lib/dpkg/status
                                             1.6.7~rc0-1 500
                                                500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                        pi@raspberrypi:~ $
                                        
                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von
                                        #64

                                        @darkblu

                                        Passt.

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        D 1 Antwort Letzte Antwort
                                        0
                                        • Thomas BraunT Thomas Braun

                                          @darkblu

                                          Passt.

                                          D Online
                                          D Online
                                          darkblu
                                          schrieb am zuletzt editiert von
                                          #65

                                          @thomas-braun ,
                                          ich kann mich nur wiederholen
                                          vielen lieben Dank

                                          Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                          Raspi 5, 8 GB für ioBroker

                                          1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          884

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe