Skip to content
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo
  1. ioBroker Community Home
  2. Deutsch
  3. Visualisierung
  4. Linux/Debian - Grafana-Repo muss aktualisiert werden

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.2k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    1.9k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    15
    1
    2.1k

Linux/Debian - Grafana-Repo muss aktualisiert werden

Geplant Angeheftet Gesperrt Verschoben Visualisierung
146 Beiträge 22 Kommentatoren 38.8k Aufrufe 22 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • M Marty56

    @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

    ? Offline
    ? Offline
    Ein ehemaliger Benutzer
    schrieb am zuletzt editiert von
    #45

    @marty56 sagte in Linux/Debian - Grafana-Repo muss aktualisiert werden:

    @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

    Moin,
    ist doch eine Aussage, kann ich mit leben, ob Du damit leben kannst und ob Du mit dieser Einstellung Hilfe bekommst, kann ich Dir nur wünschen. Ich bin dann mal weg.

    VG
    Bernd

    1 Antwort Letzte Antwort
    1
    • M Marty56

      @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

      Thomas BraunT Online
      Thomas BraunT Online
      Thomas Braun
      Most Active
      schrieb am zuletzt editiert von Thomas Braun
      #46

      @marty56 sagte in Linux/Debian - Grafana-Repo muss aktualisiert werden:

      Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

      Dann lass es bleiben und nerv andere nicht mit deinem Unwillen dich damit zu beschäftigen.

      Ich z.B. habe überhaupt keinen Bock so triviales Zeug Leuten zu erklären die es nicht wissen wollen. Setz besser ein Windows ein.

      Das Repo ist nach der obigen Anleitung und mit ein wenig Nachdenken in Nullkommanix richtig umgestellt. Hat gestern bei mir keine 10 Sekunden gedauert. Da war nix 'zu frickeln'.

      Linux-Werkzeugkasten:
      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
      NodeJS Fixer Skript:
      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

      1 Antwort Letzte Antwort
      1
      • M Marty56

        @dp20eic Sehr hilfreich. Leider habe ich überhaupt keinen Bock, Bücher über Linux zu lesen und Frickelkönig zu werden.

        ChaotC Offline
        ChaotC Offline
        Chaot
        schrieb am zuletzt editiert von
        #47

        @marty56 Ich verstehe dein Problem nicht.
        Ich musste mich beim Übergang von win 3.1 auf Win 95 komplett neu damit befassen. Dann kam Win2000 was auch viele Eigenheiten hatte und dann die Umstellung auf Win7. Auch hier musste einiges komplett neu erlernt werden.
        Warum ist das bei Windows ok, aber bei Linux plötzlich böse?
        Wenn ich eine Software nutze muss ich mich halt damit beschäftigen damit ich sie richtig einsetzen kann. Das war schon bei PC-DOS so und wird auch bei Win 25 irgendwann so bleiben.
        Und Frickelkönig? Dann hast du noch nie einen Windows Server bearbeitet.

        ioBroker auf NUC unter Proxmox; VIS: 12" Touchscreen und 17" Touch; Lichtsteuerung, Thermometer und Sensoren: Tasmota (39); Ambiente Beleuchtung: WLED (9); Heizung: DECT Thermostate (9) an Fritz 6690; EMS-ESP; 1 Echo V2; 3 Echo DOT; 1 Echo Connect; 2 Echo Show 5; Unifi Ap-Ac Lite.

        1 Antwort Letzte Antwort
        0
        • ? Offline
          ? Offline
          Ein ehemaliger Benutzer
          schrieb am zuletzt editiert von
          #48

          Moin,

          lasst doch gut sein, es geht hier nur darum Grafana und zwischendurch auch mal influxDB nach der Singnaturänderung wieder ans Laufen zu bringen, alles andere ist vergebene Liebesmüh und bring hier gar nichts 🙂

          VG
          Bernd

          M 1 Antwort Letzte Antwort
          3
          • ? Ein ehemaliger Benutzer

            Moin,

            lasst doch gut sein, es geht hier nur darum Grafana und zwischendurch auch mal influxDB nach der Singnaturänderung wieder ans Laufen zu bringen, alles andere ist vergebene Liebesmüh und bring hier gar nichts 🙂

            VG
            Bernd

            M Offline
            M Offline
            Marty56
            schrieb am zuletzt editiert von
            #49

            @dp20eic ganz meiner Meinung. Sorry, dass ich vom Thema abgewichen bin.

            HW:NUC (16 GB Ram)
            OS: Debian Bullseye, Promox V7, node v16.x npm 8.19.3

            1 Antwort Letzte Antwort
            0
            • Thomas BraunT Thomas Braun

              @lessthanmore

              Key löschen. Geht wie oben:

              sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
              

              Die /etc/apt/sources.list.d/influxdata.list löschen.
              Aktuelles Setup für influxdb:

              wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
              export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
              echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
              
              S Offline
              S Offline
              shellyrulestheworld
              schrieb am zuletzt editiert von
              #50

              @thomas-braun
              Vielen Dank für deine Beiträge. Hab auch versucht influxdb umzustellen, wie von dir beschrieben.

              
              Err:7 https://repos.influxdata.com/debian bullseye InRelease
                The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              Fetched 7,022 B in 3s (2,530 B/s)
              Reading package lists... Done
              Building dependency tree... Done
              Reading state information... Done
              All packages are up to date.
              W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
              W: Some index files failed to download. They have been ignored, or old ones used instead.
              
              

              klappt aber leider nicht. Hab ich was vergessen?
              mein vorgehen war folgendes:

              apt-key list | grep -i influxdb | wc -l
              Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
              0
              sudo rm influxdb.list
              wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
              export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
              echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
              
              
              Thomas BraunT 1 Antwort Letzte Antwort
              0
              • S shellyrulestheworld

                @thomas-braun
                Vielen Dank für deine Beiträge. Hab auch versucht influxdb umzustellen, wie von dir beschrieben.

                
                Err:7 https://repos.influxdata.com/debian bullseye InRelease
                  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                Fetched 7,022 B in 3s (2,530 B/s)
                Reading package lists... Done
                Building dependency tree... Done
                Reading state information... Done
                All packages are up to date.
                W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                W: Some index files failed to download. They have been ignored, or old ones used instead.
                
                

                klappt aber leider nicht. Hab ich was vergessen?
                mein vorgehen war folgendes:

                apt-key list | grep -i influxdb | wc -l
                Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                0
                sudo rm influxdb.list
                wget -q -O - https://repos.influxdata.com/influxdb.key | sudo gpg --dearmor -o /usr/share/keyrings/influxdb.gpg
                export DISTRIB_ID=$(lsb_release -si); export DISTRIB_CODENAME=$(lsb_release -sc)
                echo "deb [signed-by=/usr/share/keyrings/influxdb.gpg] https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/influxdb.list > /dev/null
                
                
                Thomas BraunT Online
                Thomas BraunT Online
                Thomas Braun
                Most Active
                schrieb am zuletzt editiert von Thomas Braun
                #51

                @shellyrulestheworld

                ls -lA /etc/apt/sources.list.d/
                sudo apt update
                

                sagt? Vollständig posten, nix weg lassen. Auch nicht das login prompt.

                Linux-Werkzeugkasten:
                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                NodeJS Fixer Skript:
                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                S 1 Antwort Letzte Antwort
                0
                • Thomas BraunT Thomas Braun

                  @shellyrulestheworld

                  ls -lA /etc/apt/sources.list.d/
                  sudo apt update
                  

                  sagt? Vollständig posten, nix weg lassen. Auch nicht das login prompt.

                  S Offline
                  S Offline
                  shellyrulestheworld
                  schrieb am zuletzt editiert von
                  #52

                  @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                  ls -lA /etc/apt/sources.list.d/

                  
                  pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                  total 24
                  -rw-r--r-- 1 root root  60 Dec 23 10:10 deconz.list
                  -rw-r--r-- 1 root root  84 Jan 30 14:21 grafana.list
                  -rw-r--r-- 1 root root 101 Jan 30 15:05 influxdb.list
                  -rw-r--r-- 1 root root 208 Dec 23 09:34 nodesource.list
                  -rw-r--r-- 1 root root 398 Jan 11 16:11 ookla_speedtest-cli.list
                  -rw-r--r-- 1 root root 191 Sep 22 04:50 raspi.list
                  pi@raspberrypi:~ $ sudo apt update
                  Hit:1 http://deb.debian.org/debian bullseye InRelease
                  Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                  Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
                  Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                  Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                  Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                  Hit:7 https://apt.grafana.com stable InRelease
                  Get:8 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
                  Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease
                  Err:8 https://repos.influxdata.com/debian bullseye InRelease
                    The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  Fetched 7,022 B in 2s (3,282 B/s)
                  Reading package lists... Done
                  Building dependency tree... Done
                  Reading state information... Done
                  All packages are up to date.
                  W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                  W: Some index files failed to download. They have been ignored, or old ones used instead.
                  pi@raspberrypi:~ $
                  
                  
                  Thomas BraunT 1 Antwort Letzte Antwort
                  0
                  • S shellyrulestheworld

                    @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                    ls -lA /etc/apt/sources.list.d/

                    
                    pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                    total 24
                    -rw-r--r-- 1 root root  60 Dec 23 10:10 deconz.list
                    -rw-r--r-- 1 root root  84 Jan 30 14:21 grafana.list
                    -rw-r--r-- 1 root root 101 Jan 30 15:05 influxdb.list
                    -rw-r--r-- 1 root root 208 Dec 23 09:34 nodesource.list
                    -rw-r--r-- 1 root root 398 Jan 11 16:11 ookla_speedtest-cli.list
                    -rw-r--r-- 1 root root 191 Sep 22 04:50 raspi.list
                    pi@raspberrypi:~ $ sudo apt update
                    Hit:1 http://deb.debian.org/debian bullseye InRelease
                    Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
                    Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
                    Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
                    Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
                    Hit:6 https://phoscon.de/apt/deconz bullseye InRelease
                    Hit:7 https://apt.grafana.com stable InRelease
                    Get:8 https://repos.influxdata.com/debian bullseye InRelease [7,022 B]
                    Hit:9 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease
                    Err:8 https://repos.influxdata.com/debian bullseye InRelease
                      The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                    Fetched 7,022 B in 2s (3,282 B/s)
                    Reading package lists... Done
                    Building dependency tree... Done
                    Reading state information... Done
                    All packages are up to date.
                    W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                    W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
                    W: Some index files failed to download. They have been ignored, or old ones used instead.
                    pi@raspberrypi:~ $
                    
                    
                    Thomas BraunT Online
                    Thomas BraunT Online
                    Thomas Braun
                    Most Active
                    schrieb am zuletzt editiert von Thomas Braun
                    #53

                    @shellyrulestheworld

                    sudo rm /etc/apt/sources.list.d/influxdb.list
                    wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                    echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                    echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                    sudo apt update
                    sudo apt full-upgrade
                    

                    Linux-Werkzeugkasten:
                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                    NodeJS Fixer Skript:
                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                    S H 2 Antworten Letzte Antwort
                    3
                    • Thomas BraunT Thomas Braun

                      @shellyrulestheworld

                      sudo rm /etc/apt/sources.list.d/influxdb.list
                      wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                      echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                      echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                      sudo apt update
                      sudo apt full-upgrade
                      
                      S Offline
                      S Offline
                      shellyrulestheworld
                      schrieb am zuletzt editiert von
                      #54

                      @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                      echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list

                      ein großes Dankeschön, läuft perfekt durch 🙂
                      Ist wirklich ein klasse Support von dir

                      1 Antwort Letzte Antwort
                      0
                      • D Offline
                        D Offline
                        darkblu
                        schrieb am zuletzt editiert von
                        #55

                        und wieder eine Anfänger Frage, muss ich hier auch die beiden Schlüssel von influx löschen ?

                        pi@raspberrypi:~ $ apt-key list
                        Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                        /etc/apt/trusted.gpg
                        --------------------
                        pub   rsa2048 2012-04-01 [SC]
                              A0DA 38D0 D76E 8B5D 6388  7281 9165 938D 90FD DD2E
                        uid        [ unbekannt ] Mike Thompson (Raspberry Pi Debian armhf ARMv6+VFP) <mpthompson@gmail.com>
                        sub   rsa2048 2012-04-01 [E]
                        
                        pub   rsa2048 2012-06-17 [SC]
                              CF8A 1AF5 02A2 AA2D 763B  AE7E 82B1 2992 7FA3 303E
                        uid        [ unbekannt ] Raspberry Pi Archive Signing Key
                        sub   rsa2048 2012-06-17 [E]
                        
                        pub   rsa4096 2015-09-28 [SC]
                              05CE 1508 5FC0 9D18 E99E  FB22 684A 14CF 2582 E0C5
                        uid        [ unbekannt ] InfluxDB Packaging Service <support@influxdb.com>
                        sub   rsa4096 2015-09-28 [E]
                        
                        /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg
                        ----------------------------------------------------
                        pub   rsa4096 2023-01-18 [SC] [verfällt: 2026-01-17]
                              9D53 9D90 D332 8DC7 D6C8  D3B9 D8FF 8E1F 7DF8 B07E
                        uid        [ unbekannt ] InfluxData Package Signing Key <support@influxdata.com>
                        
                        pi@raspberrypi:~ $
                        

                        und dann

                        sudo rm /etc/apt/sources.list.d/influxdb.list
                        wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                        echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                        echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                        sudo apt update
                        sudo apt full-upgrade
                        

                        ausführen ?

                        Raspi 4, 4GB für Influxdb 1.8 und Grafana
                        Raspi 5, 8 GB für ioBroker

                        Thomas BraunT 1 Antwort Letzte Antwort
                        0
                        • D darkblu

                          und wieder eine Anfänger Frage, muss ich hier auch die beiden Schlüssel von influx löschen ?

                          pi@raspberrypi:~ $ apt-key list
                          Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                          /etc/apt/trusted.gpg
                          --------------------
                          pub   rsa2048 2012-04-01 [SC]
                                A0DA 38D0 D76E 8B5D 6388  7281 9165 938D 90FD DD2E
                          uid        [ unbekannt ] Mike Thompson (Raspberry Pi Debian armhf ARMv6+VFP) <mpthompson@gmail.com>
                          sub   rsa2048 2012-04-01 [E]
                          
                          pub   rsa2048 2012-06-17 [SC]
                                CF8A 1AF5 02A2 AA2D 763B  AE7E 82B1 2992 7FA3 303E
                          uid        [ unbekannt ] Raspberry Pi Archive Signing Key
                          sub   rsa2048 2012-06-17 [E]
                          
                          pub   rsa4096 2015-09-28 [SC]
                                05CE 1508 5FC0 9D18 E99E  FB22 684A 14CF 2582 E0C5
                          uid        [ unbekannt ] InfluxDB Packaging Service <support@influxdb.com>
                          sub   rsa4096 2015-09-28 [E]
                          
                          /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg
                          ----------------------------------------------------
                          pub   rsa4096 2023-01-18 [SC] [verfällt: 2026-01-17]
                                9D53 9D90 D332 8DC7 D6C8  D3B9 D8FF 8E1F 7DF8 B07E
                          uid        [ unbekannt ] InfluxData Package Signing Key <support@influxdata.com>
                          
                          pi@raspberrypi:~ $
                          

                          und dann

                          sudo rm /etc/apt/sources.list.d/influxdb.list
                          wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                          echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                          echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                          sudo apt update
                          sudo apt full-upgrade
                          

                          ausführen ?

                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von
                          #56

                          @darkblu

                          Ja, die Schlüssel sollten aus apt-key raus.
                          Ob du dann das Repo anlegen musst hängt vom jetzigen Setup ab.

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          D 1 Antwort Letzte Antwort
                          0
                          • Thomas BraunT Thomas Braun

                            @darkblu

                            Ja, die Schlüssel sollten aus apt-key raus.
                            Ob du dann das Repo anlegen musst hängt vom jetzigen Setup ab.

                            D Offline
                            D Offline
                            darkblu
                            schrieb am zuletzt editiert von
                            #57

                            @thomas-braun
                            Wie finde ich denn raus, ob ich das Repo anlegen muss, bzw. welches Setup ich habe ?
                            Sorry für meine Unwissenheit.

                            Raspi 4, 4GB für Influxdb 1.8 und Grafana
                            Raspi 5, 8 GB für ioBroker

                            wendy2702W 1 Antwort Letzte Antwort
                            0
                            • D darkblu

                              @thomas-braun
                              Wie finde ich denn raus, ob ich das Repo anlegen muss, bzw. welches Setup ich habe ?
                              Sorry für meine Unwissenheit.

                              wendy2702W Online
                              wendy2702W Online
                              wendy2702
                              schrieb am zuletzt editiert von
                              #58

                              @darkblu Guckst du hier: https://forum.iobroker.net/post/937984

                              Bitte keine Fragen per PN, die gehören ins Forum!

                              Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                              1 Antwort Letzte Antwort
                              0
                              • D Offline
                                D Offline
                                darkblu
                                schrieb am zuletzt editiert von
                                #59

                                sodele,

                                ls -lA /etc/apt/sources.list.d/
                                sudo apt update
                                

                                sagt:

                                pi@raspberrypi:~ $ sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
                                Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                OK
                                pi@raspberrypi:~ $ sudo apt-key del 9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E
                                Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                OK
                                pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                                insgesamt 12
                                -rw-r--r-- 1 root root  84 30. Jan 18:31 grafana.list
                                -rw-r--r-- 1 root root 208 26. Aug 15:09 nodesource.list
                                -rw-r--r-- 1 root root 191 30. Okt 2021  raspi.list
                                pi@raspberrypi:~ $ sudo apt update
                                OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                OK:2 https://deb.nodesource.com/node_16.x bullseye InRelease
                                OK:3 https://apt.grafana.com stable InRelease
                                OK:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                Paketlisten werden gelesen… Fertig
                                Abhängigkeitsbaum wird aufgebaut… Fertig
                                Statusinformationen werden eingelesen… Fertig
                                Alle Pakete sind aktuell.
                                

                                wenn ich es richtig verstanden habe, bin ich dann endlich am Ziel und muss nix mehr machen 😧 ?

                                also das hier (nicht machen):

                                sudo rm /etc/apt/sources.list.d/influxdb.list
                                wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                sudo apt update
                                sudo apt full-upgrade
                                

                                Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                Raspi 5, 8 GB für ioBroker

                                Thomas BraunT 1 Antwort Letzte Antwort
                                0
                                • D darkblu

                                  sodele,

                                  ls -lA /etc/apt/sources.list.d/
                                  sudo apt update
                                  

                                  sagt:

                                  pi@raspberrypi:~ $ sudo apt-key del 05CE15085FC09D18E99EFB22684A14CF2582E0C5
                                  Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                  OK
                                  pi@raspberrypi:~ $ sudo apt-key del 9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E
                                  Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
                                  OK
                                  pi@raspberrypi:~ $ ls -lA /etc/apt/sources.list.d/
                                  insgesamt 12
                                  -rw-r--r-- 1 root root  84 30. Jan 18:31 grafana.list
                                  -rw-r--r-- 1 root root 208 26. Aug 15:09 nodesource.list
                                  -rw-r--r-- 1 root root 191 30. Okt 2021  raspi.list
                                  pi@raspberrypi:~ $ sudo apt update
                                  OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                  OK:2 https://deb.nodesource.com/node_16.x bullseye InRelease
                                  OK:3 https://apt.grafana.com stable InRelease
                                  OK:4 http://archive.raspberrypi.org/debian bullseye InRelease
                                  Paketlisten werden gelesen… Fertig
                                  Abhängigkeitsbaum wird aufgebaut… Fertig
                                  Statusinformationen werden eingelesen… Fertig
                                  Alle Pakete sind aktuell.
                                  

                                  wenn ich es richtig verstanden habe, bin ich dann endlich am Ziel und muss nix mehr machen 😧 ?

                                  also das hier (nicht machen):

                                  sudo rm /etc/apt/sources.list.d/influxdb.list
                                  wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                  echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                  echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                  sudo apt update
                                  sudo apt full-upgrade
                                  
                                  Thomas BraunT Online
                                  Thomas BraunT Online
                                  Thomas Braun
                                  Most Active
                                  schrieb am zuletzt editiert von
                                  #60

                                  @darkblu

                                  Da ist kein Repo für influxdb angelegt.
                                  Also wirst du das tun müssen, wenn influxdb verwendet werden soll.

                                  Linux-Werkzeugkasten:
                                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                  NodeJS Fixer Skript:
                                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                  D 1 Antwort Letzte Antwort
                                  0
                                  • Thomas BraunT Thomas Braun

                                    @darkblu

                                    Da ist kein Repo für influxdb angelegt.
                                    Also wirst du das tun müssen, wenn influxdb verwendet werden soll.

                                    D Offline
                                    D Offline
                                    darkblu
                                    schrieb am zuletzt editiert von
                                    #61

                                    @thomas-braun
                                    ey ey Sir
                                    hier die Ausgabe:

                                    pi@raspberrypi:~ $ iob stop
                                    pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/influxdb.list
                                    rm: das Entfernen von '/etc/apt/sources.list.d/influxdb.list' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
                                    pi@raspberrypi:~ $ wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                    pi@raspberrypi:~ $ echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                    influxdata-archive_compat.key: OK
                                    pi@raspberrypi:~ $ echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                    deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main
                                    pi@raspberrypi:~ $ sudo apt update
                                    OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                    Holen:2 https://repos.influxdata.com/debian stable InRelease [6.874 B]
                                    OK:3 https://apt.grafana.com stable InRelease
                                    OK:4 https://deb.nodesource.com/node_16.x bullseye InRelease
                                    OK:5 http://archive.raspberrypi.org/debian bullseye InRelease
                                    Holen:6 https://repos.influxdata.com/debian stable/main armhf Packages [1.669 B]
                                    Es wurden 8.543 B in 1 s geholt (6.376 B/s).
                                    Paketlisten werden gelesen… Fertig
                                    Abhängigkeitsbaum wird aufgebaut… Fertig
                                    Statusinformationen werden eingelesen… Fertig
                                    Alle Pakete sind aktuell.
                                    pi@raspberrypi:~ $ sudo apt full-upgrade
                                    Paketlisten werden gelesen… Fertig
                                    Abhängigkeitsbaum wird aufgebaut… Fertig
                                    Statusinformationen werden eingelesen… Fertig
                                    Paketaktualisierung (Upgrade) wird berechnet… Fertig
                                    0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                                    pi@raspberrypi:~ $
                                    

                                    jetzt bin ich aber durch ?

                                    Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                    Raspi 5, 8 GB für ioBroker

                                    Thomas BraunT 1 Antwort Letzte Antwort
                                    0
                                    • D darkblu

                                      @thomas-braun
                                      ey ey Sir
                                      hier die Ausgabe:

                                      pi@raspberrypi:~ $ iob stop
                                      pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/influxdb.list
                                      rm: das Entfernen von '/etc/apt/sources.list.d/influxdb.list' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
                                      pi@raspberrypi:~ $ wget -q https://repos.influxdata.com/influxdata-archive_compat.key
                                      pi@raspberrypi:~ $ echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg > /dev/null
                                      influxdata-archive_compat.key: OK
                                      pi@raspberrypi:~ $ echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
                                      deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main
                                      pi@raspberrypi:~ $ sudo apt update
                                      OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
                                      Holen:2 https://repos.influxdata.com/debian stable InRelease [6.874 B]
                                      OK:3 https://apt.grafana.com stable InRelease
                                      OK:4 https://deb.nodesource.com/node_16.x bullseye InRelease
                                      OK:5 http://archive.raspberrypi.org/debian bullseye InRelease
                                      Holen:6 https://repos.influxdata.com/debian stable/main armhf Packages [1.669 B]
                                      Es wurden 8.543 B in 1 s geholt (6.376 B/s).
                                      Paketlisten werden gelesen… Fertig
                                      Abhängigkeitsbaum wird aufgebaut… Fertig
                                      Statusinformationen werden eingelesen… Fertig
                                      Alle Pakete sind aktuell.
                                      pi@raspberrypi:~ $ sudo apt full-upgrade
                                      Paketlisten werden gelesen… Fertig
                                      Abhängigkeitsbaum wird aufgebaut… Fertig
                                      Statusinformationen werden eingelesen… Fertig
                                      Paketaktualisierung (Upgrade) wird berechnet… Fertig
                                      0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                                      pi@raspberrypi:~ $
                                      

                                      jetzt bin ich aber durch ?

                                      Thomas BraunT Online
                                      Thomas BraunT Online
                                      Thomas Braun
                                      Most Active
                                      schrieb am zuletzt editiert von
                                      #62

                                      @darkblu

                                      apt policy influxdb*
                                      

                                      sagt?

                                      Linux-Werkzeugkasten:
                                      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                      NodeJS Fixer Skript:
                                      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                      D 1 Antwort Letzte Antwort
                                      0
                                      • Thomas BraunT Thomas Braun

                                        @darkblu

                                        apt policy influxdb*
                                        

                                        sagt?

                                        D Offline
                                        D Offline
                                        darkblu
                                        schrieb am zuletzt editiert von
                                        #63

                                        @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                                        apt policy influxdb*

                                        sagt:

                                        pi@raspberrypi:~ $ apt policy influxdb*
                                        influxdb-client:
                                          Installiert:           (keine)
                                          Installationskandidat: 1.6.7~rc0-1
                                          Versionstabelle:
                                             1.6.7~rc0-1 500
                                                500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                        influxdb-dev:
                                          Installiert:           (keine)
                                          Installationskandidat: (keine)
                                          Versionstabelle:
                                        influxdb:
                                          Installiert:           1.8.10-1
                                          Installationskandidat: 1.8.10-1
                                          Versionstabelle:
                                         *** 1.8.10-1 500
                                                500 https://repos.influxdata.com/debian stable/main armhf Packages
                                                100 /var/lib/dpkg/status
                                             1.6.7~rc0-1 500
                                                500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                        pi@raspberrypi:~ $
                                        

                                        Raspi 4, 4GB für Influxdb 1.8 und Grafana
                                        Raspi 5, 8 GB für ioBroker

                                        Thomas BraunT 1 Antwort Letzte Antwort
                                        0
                                        • D darkblu

                                          @thomas-braun said in Linux/Debian - Grafana-Repo muss aktualisiert werden:

                                          apt policy influxdb*

                                          sagt:

                                          pi@raspberrypi:~ $ apt policy influxdb*
                                          influxdb-client:
                                            Installiert:           (keine)
                                            Installationskandidat: 1.6.7~rc0-1
                                            Versionstabelle:
                                               1.6.7~rc0-1 500
                                                  500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                          influxdb-dev:
                                            Installiert:           (keine)
                                            Installationskandidat: (keine)
                                            Versionstabelle:
                                          influxdb:
                                            Installiert:           1.8.10-1
                                            Installationskandidat: 1.8.10-1
                                            Versionstabelle:
                                           *** 1.8.10-1 500
                                                  500 https://repos.influxdata.com/debian stable/main armhf Packages
                                                  100 /var/lib/dpkg/status
                                               1.6.7~rc0-1 500
                                                  500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
                                          pi@raspberrypi:~ $
                                          
                                          Thomas BraunT Online
                                          Thomas BraunT Online
                                          Thomas Braun
                                          Most Active
                                          schrieb am zuletzt editiert von
                                          #64

                                          @darkblu

                                          Passt.

                                          Linux-Werkzeugkasten:
                                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                          NodeJS Fixer Skript:
                                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                          D 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          756

                                          Online

                                          32.4k

                                          Benutzer

                                          81.4k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe