Adapter "smartmeter"

church

Ich habe dann mal auf bidirektional umgestellt und erhalte dann folgenden log (bei allen overwrite modes):

! 2017-08-13 10:49:18.088 - [32minfo[39m: smartmeter.0 starting. Version 0.5.12 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
! 2017-08-13 10:49:18.099 - [34mdebug[39m: smartmeter.0 SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialRequestResponseTransport","requestInterval":"10","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transportSerialDataBits":7,"transportSerialStopBits":1,"transportSerialParity":"even","transportSerialMessageTimeout":null,"protocolD0WakeupCharacters":null,"protocolD0ModeOverwrite":"E","obisFallbackMedium":1}
! 2017-08-13 10:49:18.108 - [34mdebug[39m: smartmeter.0 CREATE SERIALPORT: 9600 7 1 even
! 2017-08-13 10:49:18.129 - [34mdebug[39m: smartmeter.0 SERIALPORT OPEN
! 2017-08-13 10:49:18.136 - [34mdebug[39m: smartmeter.0 SERIALPORT RESET BAUDRATE TO 9600
! 2017-08-13 10:49:18.141 - [34mdebug[39m: smartmeter.0 INITIAL MESSAGES TO SEND: 2
! 2017-08-13 10:49:18.145 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 0 IN GETNEXTMESSAGE
! 2017-08-13 10:49:18.146 - [34mdebug[39m: smartmeter.0 TO SEND 2:
! 2017-08-13 10:49:18.147 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 1 IN GETNEXTMESSAGE
! 2017-08-13 10:49:18.148 - [34mdebug[39m: smartmeter.0 TO SEND 1: /?!
! 2017-08-13 10:49:18.170 - [34mdebug[39m: smartmeter.0 DONE SEND 1
! 2017-08-13 10:49:18.422 - [34mdebug[39m: smartmeter.0 DONE SEND 0
! 2017-08-13 10:49:18.424 - [34mdebug[39m: smartmeter.0 SET MESSAGE TIMEOUT TIMER: 120000
! 2017-08-13 10:49:18.744 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.746 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5" -> null
! 2017-08-13 10:49:18.748 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.749 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004" -> null
! 2017-08-13 10:49:18.750 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.751 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
! 2017-08-13 10:49:18.752 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.752 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3." -> null
! 2017-08-13 10:49:18.755 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.756 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r" -> null
! 2017-08-13 10:49:18.757 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN CHECKMESSAGE
! 2017-08-13 10:49:18.760 - [34mdebug[39m: smartmeter.0 MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n\r" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
! 2017-08-13 10:49:18.763 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
! 2017-08-13 10:49:18.767 - [34mdebug[39m: smartmeter.0 OVERWRITE D0-MODE C WITH E
! 2017-08-13 10:49:18.772 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
! 2017-08-13 10:49:18.773 - [34mdebug[39m: smartmeter.0 MESSAGES TO SEND: 2
! 2017-08-13 10:49:19.030 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 3 IN GETNEXTMESSAGE
! 2017-08-13 10:49:19.032 - [34mdebug[39m: smartmeter.0 TO SEND 2: 050
! 2017-08-13 10:49:19.050 - [34mdebug[39m: smartmeter.0 DONE SEND 2
! 2017-08-13 10:49:19.301 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN GETNEXTMESSAGE
! 2017-08-13 10:49:19.302 - [34mdebug[39m: smartmeter.0 TO SEND 1:
! 2017-08-13 10:49:19.302 - [34mdebug[39m: smartmeter.0 DONE SEND 0
! 2017-08-13 10:49:19.304 - [34mdebug[39m: smartmeter.0 SET MESSAGE TIMEOUT TIMER: 120000
! 2017-08-13 10:49:19.304 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN ISPROCESSCOMPLETE: false
! 2017-08-13 10:49:19.306 - [34mdebug[39m: smartmeter.0 REMAINING DATA AFTER MESSAGE HANDLING:
! 2017-08-13 10:49:20.736 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.738 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/E" -> null
! 2017-08-13 10:49:20.741 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.742 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5" -> null
! 2017-08-13 10:49:20.742 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.743 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q" -> null
! 2017-08-13 10:49:20.744 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.744 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3D" -> null
! 2017-08-13 10:49:20.745 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.745 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA" -> null
! 2017-08-13 10:49:20.746 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.747 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2" -> null
! 2017-08-13 10:49:20.748 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.748 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA20" -> null
! 2017-08-13 10:49:20.749 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.750 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004" -> null
! 2017-08-13 10:49:20.751 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.751 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 " -> null
! 2017-08-13 10:49:20.752 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.753 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3" -> null
! 2017-08-13 10:49:20.754 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.754 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3." -> null
! 2017-08-13 10:49:20.755 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.756 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.0" -> null
! 2017-08-13 10:49:20.758 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.759 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03" -> null
! 2017-08-13 10:49:20.760 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.761 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n" -> null
! 2017-08-13 10:49:20.762 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.763 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-" -> null
! 2017-08-13 10:49:20.763 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.764 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0" -> null
! 2017-08-13 10:49:20.765 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.765 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0" -> null
! 2017-08-13 10:49:20.766 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.767 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0." -> null
! 2017-08-13 10:49:20.768 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.769 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0" -> null
! 2017-08-13 10:49:20.771 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.772 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0*" -> null
! 2017-08-13 10:49:20.774 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.774 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.025" -> null
! 2017-08-13 10:49:20.776 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.777 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(1" -> null
! 2017-08-13 10:49:20.778 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.779 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXX" -> null
! 2017-08-13 10:49:20.779 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.780 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXX" -> null
! 2017-08-13 10:49:20.781 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.781 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX" -> null
! 2017-08-13 10:49:20.782 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.783 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r" -> null
! 2017-08-13 10:49:20.784 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.784 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n" -> null
! 2017-08-13 10:49:20.786 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.791 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1" -> null
! 2017-08-13 10:49:20.793 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.794 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8." -> null
! 2017-08-13 10:49:20.796 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.796 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.02" -> null
! 2017-08-13 10:49:20.797 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.798 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255" -> null
! 2017-08-13 10:49:20.799 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.799 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(0" -> null
! 2017-08-13 10:49:20.800 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.801 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00" -> null
! 2017-08-13 10:49:20.802 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.805 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(0009" -> null
! 2017-08-13 10:49:20.806 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.807 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(0009032" -> null
! 2017-08-13 10:49:20.808 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.811 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324." -> null
! 2017-08-13 10:49:20.813 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.813 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.38787" -> null
! 2017-08-13 10:49:20.814 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.815 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743" -> null
! 2017-08-13 10:49:20.815 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.816 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743" -> null
! 2017-08-13 10:49:20.817 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.817 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743k" -> null
! 2017-08-13 10:49:20.818 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.819 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kW" -> null
! 2017-08-13 10:49:20.820 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.820 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)" -> null
! 2017-08-13 10:49:20.821 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.822 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r" -> null
! 2017-08-13 10:49:20.827 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.828 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:2" -> null
! 2017-08-13 10:49:20.832 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.833 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7" -> null
! 2017-08-13 10:49:20.835 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.838 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.25" -> null
! 2017-08-13 10:49:20.848 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.850 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261." -> null
! 2017-08-13 10:49:20.853 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.853 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00" -> null
! 2017-08-13 10:49:20.854 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.854 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r" -> null
! 2017-08-13 10:49:20.855 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.856 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n" -> null
! 2017-08-13 10:49:20.859 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.860 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0" -> null
! 2017-08-13 10:49:20.861 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.862 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41" -> null
! 2017-08-13 10:49:20.862 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41." -> null
! 2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.863 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7" -> null
! 2017-08-13 10:49:20.864 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.864 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7." -> null
! 2017-08-13 10:49:20.956 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.957 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:" -> null
! 2017-08-13 10:49:20.958 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.958 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96." -> null
! 2017-08-13 10:49:20.959 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.960 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5" -> null
! 2017-08-13 10:49:20.961 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.962 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5" -> null
! 2017-08-13 10:49:20.963 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.964 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.52" -> null
! 2017-08-13 10:49:20.965 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.966 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.525" -> null
! 2017-08-13 10:49:20.967 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.968 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(8" -> null
! 2017-08-13 10:49:20.969 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.970 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82" -> null
! 2017-08-13 10:49:20.971 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.972 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n" -> null
! 2017-08-13 10:49:20.973 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.974 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0" -> null
! 2017-08-13 10:49:20.975 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.976 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0" -> null
! 2017-08-13 10:49:20.977 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.978 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:9" -> null
! 2017-08-13 10:49:20.979 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.979 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96." -> null
! 2017-08-13 10:49:20.980 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.981 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1" -> null
! 2017-08-13 10:49:20.982 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.983 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.25" -> null
! 2017-08-13 10:49:20.984 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.985 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255" -> null
! 2017-08-13 10:49:20.986 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.987 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255*" -> null
! 2017-08-13 10:49:20.988 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.988 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.25525" -> null
! 2017-08-13 10:49:20.989 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.990 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(" -> null
! 2017-08-13 10:49:20.991 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.992 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1E" -> null
! 2017-08-13 10:49:20.993 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.994 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ES" -> null
! 2017-08-13 10:49:20.995 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.995 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY1" -> null
! 2017-08-13 10:49:20.996 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.997 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113" -> null
! 2017-08-13 10:49:20.998 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:20.999 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113X" -> null
! 2017-08-13 10:49:21.000 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:21.001 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXX" -> null
! 2017-08-13 10:49:21.002 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:21.003 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXX" -> null
! 2017-08-13 10:49:21.004 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:21.008 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXXX" -> null
! 2017-08-13 10:49:21.009 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:21.010 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXXX)\r\n!\r" -> null
! 2017-08-13 10:49:21.011 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN CHECKMESSAGE
! 2017-08-13 10:49:21.012 - [34mdebug[39m: smartmeter.0 MATCH-RESULT DATA: "\r/ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXXX)\r\n!\r\n" -> ["ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXXX)\r\n!\r\n","ESY5Q3DA2004 V3.03\r\n\r\n1-0:0.0.0255(XXXXXX)\r\n1-0:1.8.0255(00090324.3878743kWh)\r\n1-0:21.7.255255(000261.00W)\r\n1-0:41.7.255255(000151.31W)\r\n1-0:61.7.255255(000043.67W)\r\n1-0:1.7.255255(000455.98W)\r\n1-0:96.5.5255(82)\r\n0-0:96.1.255255(1ESY113XXXXXXX)\r\n"]
! 2017-08-13 10:49:21.018 - [34mdebug[39m: smartmeter.0 CURRENT PROCESS STEP 4 IN HANDLEMESSAGE
! 2017-08-13 10:49:21.052 - [31merror[39m: smartmeter.0 uncaught exception: Invalid Obis String ESY5Q3DA2004 V3.03
! 1-0:0.0.0255
! 2017-08-13 10:49:21.052 - [31merror[39m: smartmeter.0 Error: Invalid Obis String ESY5Q3DA2004 V3.03
! 1-0:0.0.0255
! at new ObisMeasurement (/opt/iobroker/node_modules/smartmeter-obis/lib/ObisMeasurement.js:46:23)
! at D0Protocol.prepareResult (/opt/iobroker/node_modules/smartmeter-obis/lib/protocols/D0Protocol.js:199:31)
! at D0Protocol.handleMessage (/opt/iobroker/node_modules/smartmeter-obis/lib/protocols/D0Protocol.js:158:27)
! at SerialPort. <anonymous>(/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialRequestResponseTransport.js:60:41)
! at emitOne (events.js:96:13)
! at SerialPort.emit (events.js:188:7)
! at SerialPort.raw (/opt/iobroker/node_modules/serialport/lib/parsers.js:7:13)
! at SerialPort._emitData (/opt/iobroker/node_modules/serialport/lib/serialport.js:313:18)
! at SerialPort. <anonymous>(/opt/iobroker/node_modules/serialport/lib/serialport.js:293:14)
! at SerialPort. <anonymous>(/opt/iobroker/node_modules/serialport/lib/serialport.js:306:7)
! 2017-08-13 10:49:21.056 - [33mwarn[39m: smartmeter.0 Exception: Error: Invalid Obis String ESY5Q3DA2004 V3.03
! 1-0:0.0.0*255
! 2017-08-13 10:49:21.061 - [34mdebug[39m: smartmeter.0 SERIALPORT CLOSE
! 2017-08-13 10:49:21.563 - [32minfo[39m: smartmeter.0 terminating
! 2017-08-13 08:49:21.588 - [31merror[39m: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 0 (OK)
! 2017-08-13 08:49:21.589 - [32minfo[39m: host.raspberrypi Restart adapter system.adapter.smartmeter.0 because enabled[/spoiler]</anonymous></anonymous></anonymous>

Wünsche noch schönen Urlaub !!

apollon77

Komisch komisch … mach mal wieder auf serial nur lesen und den override raus. Ich kapiere es gerade nicht. Versuch bitte mal Version 5.10 oder 5.11 (im Admin Expertenmodus unter Adapter dann ganz rechts ist ein Dropdown-Menü für ältere versionen. Will nur sicher gehen das es nicht an der 0.5.12 liegt ...

church

Bei den "downgrades" bekomme ich folgende Fehlermeldungen:

iobroker	2017-08-14 17:00:27.100	info	exit 0
iobroker	2017-08-14 17:00:27.085	info	Adapter "smartmeter" updated
iobroker	2017-08-14 17:00:27.022	info	upload [0] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/index.html index.html text/html
iobroker	2017-08-14 17:00:26.960	info	upload [1] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/questionmark.png questionmark.png image/png
iobroker	2017-08-14 17:00:26.804	info	upload [2] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/smartmeter.jpg smartmeter.jpg image/jpeg
iobroker	2017-08-14 17:00:26.727	info	upload [3] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/smartmeter.png smartmeter.png image/png
iobroker	2017-08-14 17:00:26.636	info	upload [4] smartmeter.admin /opt/iobroker/node_modules/iobroker.smartmeter/admin/tooltip.css tooltip.css text/css
iobroker	2017-08-14 17:00:26.603	info	got /opt/iobroker/node_modules/iobroker.smartmeter/admin
iobroker	2017-08-14 17:00:19.439	info	npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.smartmeter"
iobroker	2017-08-14 17:00:19.404	info	npm ERR! /opt/npm-debug.log
iobroker	2017-08-14 17:00:19.404	info	npm ERR! Please include the following file with any support request:
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget a package version that doesn't exist.
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget In most cases you or one of your dependencies are requesting
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget This is most likely not a problem with npm itself.
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget 0.5.12, 0.5.8, 0.5.7, 0.5.6, 0.5.5, 0.5.4, 0.5.0, 0.4.1, 0.4.0, 0.3.3, 0.3.2, 0.3.1, 0.3.0, 0.2.6, 0.2.4, 0.2.0, 0.1.1, 0.1.0
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget Valid install targets:
iobroker	2017-08-14 17:00:19.404	info	npm ERR! notarget No compatible version found: iobroker.smartmeter@0.5.11
iobroker	2017-08-14 17:00:19.404	info	npm ERR! code ETARGET
iobroker	2017-08-14 17:00:19.398	info	npm ERR! npm v3.10.10
iobroker	2017-08-14 17:00:19.398	info	npm ERR! node v6.11.2
iobroker	2017-08-14 17:00:19.398	info	npm ERR! Linux 4.9.35-v7+npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "iobroker.smartmeter@0.5.11" "--production" "--prefix" "/opt/iobroker"
iobroker	2017-08-14 17:00:07.577	info	npm install iobroker.smartmeter@0.5.11 --production --prefix "/opt/iobroker" (System call)
iobroker	2017-08-14 17:00:05.362	info	upgrade smartmeter@0.5.11

apollon77

Ok dann nimm die 0.5.8 das André waren github Zwischenversionen …

church

Bis 0.5.9 runter hatte ich probiert 8-)

Downgrade auf 0.5.8 hat dann funktioniert und es werden jetzt erstmalig die Datenpunkte angelegt:

3265_bildschirmfoto_2017-08-15_um_14.35.02.jpg

Leider bleibt es bei dem einmaligen Einlesen, im log kommt dann wieder der Fehler:

smartmeter.0	2017-08-15 14:33:54.508	debug	SERIALPORT CLOSE
smartmeter.0	2017-08-15 14:33:54.508	warn	Exception: Error: No or too long message from Serial Device.
smartmeter.0	2017-08-15 14:33:54.508	error	Error: No or too long message from Serial Device. at SerialResponseTransport.handleSerialTimeout (/opt/iobroker/node_modules/iobroker.smartmeter/node_modules/smartmeter-obis/lib/transports/SerialR
smartmeter.0	2017-08-15 14:33:54.507	error	uncaught exception: No or too long message from Serial Device.
smartmeter.0	2017-08-15 14:33:54.506	debug	MESSAGE TIMEOUT TRIGGERED
smartmeter.0	2017-08-15 14:33:44.454	debug	REMAINING DATA AFTER MESSAGE HANDLING:
smartmeter.0	2017-08-15 14:33:44.453	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-15 14:33:44.453	debug	SET MESSAGE TIMEOUT TIMER: 10000
smartmeter.0	2017-08-15 14:33:44.453	debug	SerialResponseTransport do not support sending of Data! Ignore them
smartmeter.0	2017-08-15 14:33:44.453	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-15 14:33:44.452	debug	CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
smartmeter.0	2017-08-15 14:33:44.452	debug	PAUSE READING SERIALPORT TO HANDLE MESSAGE
smartmeter.0	2017-08-15 14:33:44.451	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
smartmeter.0	2017-08-15 14:33:44.451	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.449	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03" -> null
smartmeter.0	2017-08-15 14:33:44.449	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.449	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.0" -> null
smartmeter.0	2017-08-15 14:33:44.449	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.448	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
smartmeter.0	2017-08-15 14:33:44.448	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.448	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004" -> null
smartmeter.0	2017-08-15 14:33:44.447	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:44.447	debug	MATCH-RESULT SIGNON: "/ESY5" -> null
smartmeter.0	2017-08-15 14:33:44.445	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-15 14:33:43.558	debug	SET MESSAGE TIMEOUT TIMER: 10000
smartmeter.0	2017-08-15 14:33:43.557	debug	SERIALPORT OPEN
smartmeter.0	2017-08-15 14:33:43.557	debug	CREATE SERIALPORT: 9600 7 1 even
smartmeter.0	2017-08-15 14:33:43.556	debug	SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"10","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transportSe
smartmeter.0	2017-08-15 14:33:43.555	info	starting. Version 0.5.8 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
host.raspberrypi	2017-08-15 14:33:41.007	info

Kann das ggfs. an der Leerzeile nach der ersten Zeile (/ESY5Q3DA2004 V3.03) der D0-Message liegen?

apollon77

Die Leerzeile ist korrekt. Auf welchem Betriebssystem läuft das denn bei dir? Linux Mac oder Windows? Wenn du den Adapter stops und dann neu startest geht es dann wieder ein mal?

apollon77

Und hast du das log von dem einen mal wo es geklappt hat?

church

Iobroker läuft bei mir auf einem Rpi3 mit Raspbian Jessie! In meinem letzten post hatte ich den log angehangen, wo es funktioniert hat!

Ich habe den Adapter nochmal deinstalliert, reboot und dann neu installiert. Jetzt werden andere Datenpunkte angelegt:

3265_bildschirmfoto_2017-08-16_um_09.53.33.jpg

Hier der log seit Neuinstallation:

host.raspberrypi	2017-08-16 09:51:39.924	error	instance system.adapter.smartmeter.0 terminated with code 0 (OK)
smartmeter.0	2017-08-16 09:51:39.893	info	terminating
smartmeter.0	2017-08-16 09:51:39.393	debug	SERIALPORT CLOSE
smartmeter.0	2017-08-16 09:51:39.389	warn	Exception: Error: No or too long message from Serial Device.
smartmeter.0	2017-08-16 09:51:39.383	error	at Timer.listOnTimeout (timers.js:214:5)
smartmeter.0	2017-08-16 09:51:39.383	error	at tryOnTimeout (timers.js:250:5)
smartmeter.0	2017-08-16 09:51:39.383	error	at ontimeout (timers.js:386:14)
smartmeter.0	2017-08-16 09:51:39.383	error	at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.smartmeter/node_modules/smartmeter-obis/lib/transports/SerialResponseTransport.js:87:22)
smartmeter.0	2017-08-16 09:51:39.383	error	at SerialResponseTransport.handleSerialTimeout (/opt/iobroker/node_modules/iobroker.smartmeter/node_modules/smartmeter-obis/lib/transports/SerialResponseTransport.js:200:11)
smartmeter.0	2017-08-16 09:51:39.383	error	Error: No or too long message from Serial Device.
smartmeter.0	2017-08-16 09:51:39.382	error	uncaught exception: No or too long message from Serial Device.
smartmeter.0	2017-08-16 09:51:39.348	debug	MESSAGE TIMEOUT TRIGGERED
smartmeter.0	2017-08-16 09:49:39.346	debug	REMAINING DATA AFTER MESSAGE HANDLING:
smartmeter.0	2017-08-16 09:49:39.345	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-16 09:49:39.345	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-16 09:49:39.344	debug	SerialResponseTransport do not support sending of Data! Ignore them
smartmeter.0	2017-08-16 09:49:39.342	debug	CURRENT PROCESS STEP 3 IN ISPROCESSCOMPLETE: false
smartmeter.0	2017-08-16 09:49:39.337	debug	CURRENT PROCESS STEP 2 IN HANDLEMESSAGE
smartmeter.0	2017-08-16 09:49:39.333	debug	PAUSE READING SERIALPORT TO HANDLE MESSAGE
smartmeter.0	2017-08-16 09:49:39.332	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r\n" -> ["/ESY5Q3DA2004 V3.03\r\n","/ESY5Q3DA2004 V3.03"]
smartmeter.0	2017-08-16 09:49:39.331	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:39.330	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.03\r" -> null
smartmeter.0	2017-08-16 09:49:39.330	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:39.329	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3.0" -> null
smartmeter.0	2017-08-16 09:49:39.328	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:39.327	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V3" -> null
smartmeter.0	2017-08-16 09:49:39.327	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:39.325	debug	MATCH-RESULT SIGNON: "/ESY5Q3DA2004 V" -> null
smartmeter.0	2017-08-16 09:49:39.324	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:39.323	debug	MATCH-RESULT SIGNON: "/ESY" -> null
smartmeter.0	2017-08-16 09:49:39.321	debug	CURRENT PROCESS STEP 0 IN CHECKMESSAGE
smartmeter.0	2017-08-16 09:49:37.752	debug	SET MESSAGE TIMEOUT TIMER: 120000
smartmeter.0	2017-08-16 09:49:37.745	debug	SERIALPORT OPEN
smartmeter.0	2017-08-16 09:49:37.729	debug	CREATE SERIALPORT: 9600 7 1 even
smartmeter.0	2017-08-16 09:49:37.722	debug	SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"300","transportSerialPort":"/dev/ttyUSB0","transportSerialBaudrate":9600,"transport
smartmeter.0	2017-08-16 09:49:37.711	info	starting. Version 0.5.8 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v6.11.2
smartmeter.0	2017-08-16 09:49:37.632	debug	statesDB connected
smartmeter.0	2017-08-16 09:49:37.561	debug	objectDB connected
host.raspberrypi	2017-08-16 09:49:35.093	info	instance system.adapter.smartmeter.0 started with pid 1232
host.raspberrypi	2017-08-16 09:49:35.042	info	object change system.adapter.smartmeter.0
host.raspberrypi	2017-08-16 09:49:05.618	info	object change system.adapter.smartmeter.0
host.raspberrypi	2017-08-16 09:48:50.699	info	object change system.adapter.smartmeter.0
iobroker	2017-08-16 09:48:15.635	info	exit 0
iobroker	2017-08-16 09:48:15.621	info	host.raspberrypi object system.adapter.smartmeter.0 created
host.raspberrypi	2017-08-16 09:48:15.615	info	object change system.adapter.smartmeter.0
iobroker	2017-08-16 09:48:15.572	info	host.raspberrypi object system.adapter.smartmeter.0.alive created
iobroker	2017-08-16 09:48:15.541	info	host.raspberrypi object system.adapter.smartmeter.0.connected created
iobroker	2017-08-16 09:48:15.511	info	host.raspberrypi object system.adapter.smartmeter.0.memHeapUsed created
iobroker	2017-08-16 09:48:15.481	info	host.raspberrypi object system.adapter.smartmeter.0.memHeapTotal created
iobroker	2017-08-16 09:48:15.445	info	host.raspberrypi object system.adapter.smartmeter.0.memRss created
iobroker	2017-08-16 09:48:15.418	info	host.raspberrypi object system.adapter.smartmeter.0.uptime created
iobroker	2017-08-16 09:48:15.383	info	host.raspberrypi object system.adapter.smartmeter.0.inputCount created
iobroker	2017-08-16 09:48:15.352	info	host.raspberrypi object system.adapter.smartmeter.0.outputCount created
iobroker	2017-08-16 09:48:15.335	info	host.raspberrypi create instance smartmeter
iobroker	2017-08-16 09:48:13.496	info	add smartmeter

knopers1

Hallo Apollon77

ich wollte an meinem Gaszähler den Verbrauch auslesen.

Genau ist es ein GT4 Gaszähler siehe Bild. Als Hardware wurde einfach ein Magnet-Reedkontakt an einem ESP8266 (WEMO D1 mini) angeschlossen.

Dort als Betriebssystem habe ich Tasmota installiert. Daten kommen über MQTT Adapter an IOBroker an.

Der magnetische Kontakt hängt jetzt am Zählwerk in der letzten Stelle des Zählwerks.

Somit wird alle 0.01 m³ (=10l) mein Reedkontakt kurzgeschlossen.

Unter MQTT Adapter sehe ich ob der Kontakt true oder false ist.

Ich kann den Eingang des Wemos auch so umkonfigurieren, dass man dort die Zählimpulse zählen kann…

Kannst Du mich auf die Spur bringen, ob dein Adapter damit umgehen kann?

Ich würde gerne mit dem FLOT Adapter mir eine schöne Grafik basteln.

Dazu ein Wert für den aktuellen Verbrauch, gesamten Verbrauch sowie Kosten loggen können.

Kannst Du helfen?
1526_141211-nabu-gaszaehler-mdommel.jpeg

RappiRN

~~@noxx:~~

funktioniert der Adapter auch mit ESPeasy und dem Pulse Counter?

Oder gibt es Arduino Lösungen? Habe am Arduino im moment ein Read-Schalter, der

Read-Schalter am Gaszähler.

Ähnlich wie hier: https://voizchat.de/gaszaehler-verbrauc … erry-gpio/ `

noxx hat schon mal ne ähnliche Frage gestellt,geht nicht. Ein paar Seiten weiter vorn. Außerdem gibts von ihm auch noch ne Lösung wo aus einer Webseite Daten ausgelesen werden können.

http://forum.iobroker.net/viewtopic.php?f=21&t=7556&hilit=gasz%C3%A4hler gibts dazu noch ein paar Infos.

RappiRN

knopers1

woww, Danke Dir für den Link!

apollon77

@church: muss ich Montag checken …

church

Super, danke!

Arminhh

Guten Morgen,

ich habe jetzt alle Seiten durch gelesen! Leider habe ich noch ein Problem.

Ich habe mir diese Woche den extra den Multihost eingerichtet. Der Slave ein PI 3B ist im Keller und der Lesekopf von UDO angeschlossen.

Der Smartmeter Adapter lässt sich installieren. Beim Starten des Adapters erscheint die Fehlermeldung wie auf Seite 28 gefunden

host.rasp_pv1_goke 2017-07-24 21:35:41.501 error instance system.adapter.smartmeter.0 terminated with code 1 ()

host.rasp_pv1_goke 2017-07-24 21:35:40.719 info instance system.adapter.smartmeter.0 started with pid 11153

host.rasp_pv1_goke 2017-07-24 21:35:35.334 info Restart adapter system.adapter.smartmeter.0 because enabled

Scheinbar muss laut Seite 28

" Komisch … Dann löscht mal den "open-sml" ordner und installiere dann den Adapter. Sollte dann wieder installiert werden. Falls nicht wirf auch smartmeter-obis weg (oder gleich beides)"

gelöscht werden!

Leider finde ich weder wen der Adapter installiert ist, noch wenn er deinstalliert ist die beiden Verzeichnisse!

Danke für die Hilfe

Homoran

Hallo Armin,

nur damit wir vom gleichen reden:

Bei Multihost darf vor der Verbindung zum Master NUR der admin (und der Discovery) installiert sein.

Alles andere muss anschließend über den Master (unter Host.1=Slave) installiert werden.

Auf keinen Fall vorher auf dem Keller-Pi installieren und dann erst als Slave definieren.

Hast du das so ausgeführt?

Gruß

Rainer

Arminhh

Danke für den Hinweis! Das habe ich berücksichtigt! Erst die Verbindung zwischen Host und Slave dann über den Master Admin auf dem Slave den Smartmeter Adapter installiert!

mfg

Armin

Homoran

Danke für die Antwort,

dann ist die Grundinstallation schon mal ok (so habe ich es auch - allerdings mit einem Pi2) und es läuft.

Dann müsste @apollon77 etwas dazu sagen, der ist aber in Urlaub, was ihn aber anscheinend nicht hindern wird

Gruß

Rainer

Arminhh

Ich habe auch test weise mal einen anderen Adapter installiert. Der lief auf Anhieb auf dem Slave ! Liegt also nicht an meiner Installation!

mfg

Arminhh

Homoran

Vielleicht wären noch deine Versionen von js-controller und admin interessant.

Gruß

Rainer

Arminhh

alles aktuell

js-controller 1.1.2

Admin 2.0.2

NEWS

Adapter "smartmeter"

Support us

955
Online

31.6k
Users

79.4k
Topics

1.3m
Posts

NEWS

Adapter "smartmeter"

Support us

955Online

31.6kUsers

79.4kTopics

1.3mPosts

955
Online

31.6k
Users

79.4k
Topics

1.3m
Posts