Synology NAS hängt sich auf
-
@arteck
Ich hab meine Antwort jetzt bearbeitet. Es liegt definitiv nicht an den Scripten. Habe alle abgeschaltet, aber gerade eben hatte ich wieder das selbe Problem. Die Auslastung ging hoch auf 100%, ich habe sofort den Container abgeschaltet. Das ging auch noch. Kurz gewartet, wieder eingeschaltet und weg war mein NAS. Jetzt ist es wieder nicht mehr erreichbar und muss vom Strom getrennt werden
-
Welches dsm? 6 oder 7?
Irgendwas hilfreiches im Iobroker log? Fangen wir doch mal mit spolchen Grundfragen an ;-))
-
@vo5tr0 Kannst du einen Prozess innerhalb des Containers identifizieren der die CPU Last verursacht?
[EDIT] Leider gibt das die Oberfläche der DS nicht her, aber unter Docker kann man grundsätzlich auch die Ressourcen (RAM, CPU) limitieren. Das könnte ggf. erstmal helfen, dass deine DS nicht immer abkackt... Dann hätte man ggf. ne bessere Chance zu analysieren was in dem Container los ist...
MfG,
André -
Das die NAS sich aufhängt hat schon mal nichts mit ioBroker zu tun. Die DS sollte den Container Hardware Resourcen mässig Limitieren und da scheint nicht zu passieren. Hier könnte Andre sein Tipp helfen.
Das die CPU Last des Containers plötzlich auf 100% springt könnte an der Boost Funktion der CPU liegen. Der Taktet normal mit 1.5Ghz und Boostet bis 2.3Ghz. Der Plötzliche Sprung entsteht vielleicht durch das runter Takten der CPU. Wahrscheinlich gibt es da noch einen zweiten Faktor der im selben Augenblick present ist.
Möglich das die CPU auch nicht mehr schnell genug hoch Taktet, evtl. wegen zu hoher Temperarur.Wenn es möglich ist Überwach mal die CPU Frequenz und die CPU Temperatur.
-
DSM 7
Gegen 23:04 habe ich die hohe Auslastung bemerkt und den Container abgeschaltet. Dann um 23:05 Uhr wieder gestartet. Die Auslastung ging sofort hoch auf 100%, laut Docker log kam der erneute Shutdown Befehl noch an und der Container wurde auch gegen 23:07 Uhr erfolgreich gestoppt. Zu dem Zeitpunkt war mein NAS aber schon nicht mehr erreichbar.
Ich packe hier einfach Mal die letzen Zeilen aus dem IO Broker Log rein, aber etwas auffälliges konnte ich nicht sehen
2022-05-10 21:03:05.739 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:03:05.741 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:05:48.309 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:05:48.310 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:09:03.658 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:09:03.658 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:11:46.345 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:11:46.347 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:15:01.192 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:15:01.193 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:02.503 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:02.510 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:03.731 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:04.769 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:09.188 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:09.196 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:09.197 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:09.198 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:10.772 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:10.773 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:12.015 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:12.019 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:13.784 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:13.785 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:15.448 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:15.450 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:16.868 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:16.872 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:26.644 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:26.647 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:50:28.368 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:50:28.377 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:52:39.194 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:52:39.195 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:53:04.085 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:53:04.087 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 21:53:05.616 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 21:53:06.204 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 22:04:32.893 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 22:04:32.906 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 22:04:34.158 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 22:04:35.461 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.178.140 2022-05-10 22:09:39.343 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 22:09:39.383 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.178.140 flot 2022-05-10 22:55:52.184 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 22:55:53.090 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:02:56.657 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.180.89 flot 2022-05-10 23:02:57.923 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:03:49.937 - [32minfo[39m: web.0 (288) <== Disconnect system.user.admin from ::ffff:192.168.180.89 flot 2022-05-10 23:03:52.694 - [32minfo[39m: web.0 (288) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:05:39.173 - [32minfo[39m: host.buanet-iobroker1 iobroker.js-controller version 4.0.15 js-controller starting 2022-05-10 23:05:39.179 - [32minfo[39m: host.buanet-iobroker1 Copyright (c) 2014-2022 bluefox, 2014 hobbyquaker 2022-05-10 23:05:39.180 - [32minfo[39m: host.buanet-iobroker1 hostname: buanet-iobroker1, node: v14.19.1 2022-05-10 23:05:39.180 - [32minfo[39m: host.buanet-iobroker1 ip addresses: 192.168.178.3 172.19.0.1 fe80::42:96ff:fea4:97df 172.17.0.1 fe80::42:22ff:fe70:b7e2 fe80::8cac:dbff:feee:8378 fe80::acd6:77ff:fe61:b496 fe80::b0e0:ff:fe97:da1d fe80::4420:c7ff:fed8:83 2022-05-10 23:05:41.665 - [32minfo[39m: host.buanet-iobroker1 connected to Objects and States 2022-05-10 23:05:41.704 - [32minfo[39m: host.buanet-iobroker1 added notifications configuration of host 2022-05-10 23:05:42.305 - [32minfo[39m: host.buanet-iobroker1 27 instances found 2022-05-10 23:05:42.372 - [32minfo[39m: host.buanet-iobroker1 starting 18 instances 2022-05-10 23:05:42.757 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.admin.0 started with pid 126 2022-05-10 23:05:45.009 - [32minfo[39m: admin.0 (126) starting. Version 5.3.1 in /opt/iobroker/node_modules/iobroker.admin, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:05:45.063 - [32minfo[39m: admin.0 (126) requesting all states 2022-05-10 23:05:45.064 - [32minfo[39m: admin.0 (126) requesting all objects 2022-05-10 23:05:46.202 - [32minfo[39m: admin.0 (126) received all objects 2022-05-10 23:05:46.710 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.javascript.0 started with pid 141 2022-05-10 23:05:47.619 - [32minfo[39m: admin.0 (126) Request actual repository... 2022-05-10 23:05:47.641 - [32minfo[39m: admin.0 (126) http server listening on port 8081 2022-05-10 23:05:47.642 - [32minfo[39m: admin.0 (126) Use link "http://localhost:8081" to configure. 2022-05-10 23:05:48.020 - [32minfo[39m: host.buanet-iobroker1 Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2022-05-10 23:05:50.531 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.history.0 started with pid 152 2022-05-10 23:05:50.596 - [32minfo[39m: admin.0 (126) Repository received successfully. 2022-05-10 23:05:51.267 - [32minfo[39m: javascript.0 (141) starting. Version 5.2.21 in /opt/iobroker/node_modules/iobroker.javascript, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:05:51.516 - [32minfo[39m: javascript.0 (141) requesting all states 2022-05-10 23:05:51.518 - [32minfo[39m: javascript.0 (141) requesting all objects 2022-05-10 23:05:52.827 - [32minfo[39m: javascript.0 (141) received all objects 2022-05-10 23:05:52.956 - [32minfo[39m: javascript.0 (141) received all states 2022-05-10 23:05:53.312 - [31merror[39m: admin.0 (126) error 2022-05-10 23:05:53.484 - [32minfo[39m: history.0 (152) starting. Version 1.10.5 in /opt/iobroker/node_modules/iobroker.history, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:05:53.601 - [32minfo[39m: history.0 (152) enabled logging of sonoff.0.Smartmeter.Power_Total_in (Count=1), Alias=false 2022-05-10 23:05:53.603 - [32minfo[39m: history.0 (152) enabled logging of sonoff.0.Smartmeter.Power_Power_curr (Count=2), Alias=false 2022-05-10 23:05:53.604 - [32minfo[39m: history.0 (152) enabled logging of sonoff.0.Smartmeter.Power_Total_out (Count=3), Alias=false 2022-05-10 23:05:53.604 - [32minfo[39m: history.0 (152) enabled logging of fritzdect.0.DECT_087610067164.state (Count=4), Alias=false 2022-05-10 23:05:53.605 - [32minfo[39m: history.0 (152) enabled logging of fritzdect.0.DECT_087610067164.power (Count=5), Alias=false 2022-05-10 23:05:53.606 - [32minfo[39m: history.0 (152) enabled logging of fritzdect.0.DECT_087610067164.celsius (Count=6), Alias=false 2022-05-10 23:05:53.606 - [32minfo[39m: history.0 (152) enabled logging of shelly.1.shellyplus1pm#7c87ce64d6d0#1.Relay0.Power (Count=7), Alias=false 2022-05-10 23:05:54.438 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.telegram.0 started with pid 183 2022-05-10 23:05:58.459 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.sonoff.0 started with pid 194 2022-05-10 23:05:58.631 - [32minfo[39m: telegram.0 (183) starting. Version 1.12.2 in /opt/iobroker/node_modules/iobroker.telegram, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:00.421 - [32minfo[39m: sonoff.0 (194) starting. Version 2.4.7 in /opt/iobroker/node_modules/iobroker.sonoff, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:00.483 - [32minfo[39m: sonoff.0 (194) Starting MQTT authenticated server on port 1883 2022-05-10 23:06:02.431 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.0 started with pid 213 2022-05-10 23:06:04.790 - [32minfo[39m: alexa2.0 (213) starting. Version 3.11.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:04.953 - [32minfo[39m: alexa2.0 (213) Proxy IP not set, use first network interface (192.168.178.3) instead 2022-05-10 23:06:06.449 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.1 started with pid 228 2022-05-10 23:06:08.789 - [32minfo[39m: alexa2.1 (228) starting. Version 3.11.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:09.066 - [32minfo[39m: alexa2.1 (228) Proxy IP not set, use first network interface (192.168.178.3) instead 2022-05-10 23:06:09.100 - [32minfo[39m: alexa2.0 (213) Update cookie in adapter configuration ... restarting ... 2022-05-10 23:06:09.153 - [32minfo[39m: host.buanet-iobroker1 stopInstance system.adapter.alexa2.0 (force=false, process=true) 2022-05-10 23:06:09.177 - [32minfo[39m: alexa2.0 (213) Got terminate signal TERMINATE_YOURSELF 2022-05-10 23:06:09.178 - [32minfo[39m: alexa2.0 (213) terminating 2022-05-10 23:06:09.180 - [32minfo[39m: alexa2.0 (213) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-05-10 23:06:09.202 - [32minfo[39m: host.buanet-iobroker1 stopInstance system.adapter.alexa2.0 send kill signal 2022-05-10 23:06:09.746 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-05-10 23:06:10.401 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.meross.0 started with pid 256 2022-05-10 23:06:12.298 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.0 started with pid 267 2022-05-10 23:06:12.769 - [32minfo[39m: alexa2.1 (228) Update cookie in adapter configuration ... restarting ... 2022-05-10 23:06:12.845 - [32minfo[39m: host.buanet-iobroker1 stopInstance system.adapter.alexa2.1 (force=false, process=true) 2022-05-10 23:06:12.868 - [32minfo[39m: alexa2.1 (228) Got terminate signal TERMINATE_YOURSELF 2022-05-10 23:06:12.880 - [32minfo[39m: alexa2.1 (228) terminating 2022-05-10 23:06:12.885 - [32minfo[39m: alexa2.1 (228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-05-10 23:06:12.909 - [32minfo[39m: host.buanet-iobroker1 stopInstance system.adapter.alexa2.1 send kill signal 2022-05-10 23:06:12.917 - [32minfo[39m: meross.0 (256) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.meross, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:13.468 - [31merror[39m: meross.0 (256) Meross Connection Error: Error: 0: 2022-05-10 23:06:13.470 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-05-10 23:06:14.337 - [32minfo[39m: alexa2.0 (267) starting. Version 3.11.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:14.463 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.shelly.0 started with pid 287 2022-05-10 23:06:14.508 - [32minfo[39m: alexa2.0 (267) Proxy IP not set, use first network interface (192.168.178.3) instead 2022-05-10 23:06:15.972 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.alexa2.1 started with pid 294 2022-05-10 23:06:17.312 - [32minfo[39m: alexa2.0 (267) Alexa-Push-Connection (macDms = true) established. Disable Polling 2022-05-10 23:06:17.732 - [32minfo[39m: shelly.0 (287) starting. Version 5.3.2 in /opt/iobroker/node_modules/iobroker.shelly, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:18.103 - [32minfo[39m: shelly.0 (287) Starting in CoAP mode. 2022-05-10 23:06:18.298 - [32minfo[39m: alexa2.1 (294) starting. Version 3.11.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:18.561 - [32minfo[39m: alexa2.1 (294) Proxy IP not set, use first network interface (192.168.178.3) instead 2022-05-10 23:06:18.564 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.hue.0 started with pid 317 2022-05-10 23:06:19.289 - [32minfo[39m: shelly.0 (287) [CoAP] Listening for packets in the network 2022-05-10 23:06:20.988 - [32minfo[39m: alexa2.1 (294) Alexa-Push-Connection (macDms = true) established. Disable Polling 2022-05-10 23:06:21.206 - [32minfo[39m: alexa2.1 (294) Unknown Device, but enabling commands, Try it and report back if commands work. 2022-05-10 23:06:21.208 - [32minfo[39m: alexa2.1 (294) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2022-05-10 23:06:21.208 - [32minfo[39m: alexa2.1 (294) Device-type:A3QS1XP2U6UJX9 (AMAZON_MUSIC,SIRIUSXM,MICROPHONE,PERSISTENT_CONNECTION,I_HEART_RADIO,TUNE_IN,CHANGE_NAME,DREAM_TRAINING,TOUCH_INITIATED,ADAPTIVE_LISTENING,AUDIBLE,SLEEP,MUSIC_SKILL,GOLDFISH,TIMERS_AND_ALARMS,VOLUME_SETTING,APPLE_MUSIC,AUDIO_PLAYER,TIDAL,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,KINDLE_BOOKS,DEEZER,DEREGISTER_DEVICE,HANDS_FREE) 2022-05-10 23:06:21.466 - [32minfo[39m: shelly.0 (287) [CoAP] Device 192.168.180.98 (shellyplug-s / shellyplug-s-16A2C3 / SHPLG2-1#16A2C3#1) connected! Polltime set to 15 sec. 2022-05-10 23:06:21.979 - [32minfo[39m: hue.0 (317) starting. Version 3.6.5 in /opt/iobroker/node_modules/iobroker.hue, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:22.532 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.shelly.1 started with pid 332 2022-05-10 23:06:23.681 - [32minfo[39m: hue.0 (317) skip switch: Daylight.configured 2022-05-10 23:06:23.682 - [32minfo[39m: hue.0 (317) skip switch: Daylight.sunriseoffset 2022-05-10 23:06:23.683 - [32minfo[39m: hue.0 (317) skip switch: Daylight.sunsetoffset 2022-05-10 23:06:23.707 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 1.alert 2022-05-10 23:06:23.707 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 1.ledindication 2022-05-10 23:06:23.708 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 1.usertest 2022-05-10 23:06:23.716 - [32minfo[39m: hue.0 (317) skip switch: Bad Sensor.alert 2022-05-10 23:06:23.717 - [32minfo[39m: hue.0 (317) skip switch: Bad Sensor.ledindication 2022-05-10 23:06:23.717 - [32minfo[39m: hue.0 (317) skip switch: Bad Sensor.usertest 2022-05-10 23:06:23.719 - [32minfo[39m: hue.0 (317) skip switch: Bad Sensor.sensitivity 2022-05-10 23:06:23.720 - [32minfo[39m: hue.0 (317) skip switch: Bad Sensor.sensitivitymax 2022-05-10 23:06:23.746 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 1.alert 2022-05-10 23:06:23.747 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 1.tholddark 2022-05-10 23:06:23.747 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 1.tholdoffset 2022-05-10 23:06:23.748 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 1.ledindication 2022-05-10 23:06:23.749 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 1.usertest 2022-05-10 23:06:23.761 - [32minfo[39m: hue.0 (317) skip switch: MotionSensor 13.Companion.status 2022-05-10 23:06:23.767 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 3.alert 2022-05-10 23:06:23.768 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 3.ledindication 2022-05-10 23:06:23.769 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 3.usertest 2022-05-10 23:06:23.777 - [32minfo[39m: hue.0 (317) skip switch: Eingangsbereich Sensor.alert 2022-05-10 23:06:23.777 - [32minfo[39m: hue.0 (317) skip switch: Eingangsbereich Sensor.ledindication 2022-05-10 23:06:23.778 - [32minfo[39m: hue.0 (317) skip switch: Eingangsbereich Sensor.usertest 2022-05-10 23:06:23.778 - [32minfo[39m: hue.0 (317) skip switch: Eingangsbereich Sensor.sensitivity 2022-05-10 23:06:23.779 - [32minfo[39m: hue.0 (317) skip switch: Eingangsbereich Sensor.sensitivitymax 2022-05-10 23:06:23.793 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 3.alert 2022-05-10 23:06:23.794 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 3.tholddark 2022-05-10 23:06:23.796 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 3.tholdoffset 2022-05-10 23:06:23.796 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 3.ledindication 2022-05-10 23:06:23.798 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 3.usertest 2022-05-10 23:06:23.809 - [32minfo[39m: hue.0 (317) skip switch: MotionSensor 39.Companion.status 2022-05-10 23:06:23.813 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 4.alert 2022-05-10 23:06:23.814 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 4.ledindication 2022-05-10 23:06:23.814 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 4.usertest 2022-05-10 23:06:23.823 - [32minfo[39m: hue.0 (317) skip switch: Küche Sensor.alert 2022-05-10 23:06:23.823 - [32minfo[39m: hue.0 (317) skip switch: Küche Sensor.ledindication 2022-05-10 23:06:23.824 - [32minfo[39m: hue.0 (317) skip switch: Küche Sensor.usertest 2022-05-10 23:06:23.824 - [32minfo[39m: hue.0 (317) skip switch: Küche Sensor.sensitivity 2022-05-10 23:06:23.826 - [32minfo[39m: hue.0 (317) skip switch: Küche Sensor.sensitivitymax 2022-05-10 23:06:23.838 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 4.alert 2022-05-10 23:06:23.838 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 4.tholddark 2022-05-10 23:06:23.840 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 4.tholdoffset 2022-05-10 23:06:23.841 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 4.ledindication 2022-05-10 23:06:23.843 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 4.usertest 2022-05-10 23:06:23.856 - [32minfo[39m: hue.0 (317) skip switch: MotionSensor 46.Companion.status 2022-05-10 23:06:23.862 - [32minfo[39m: hue.0 (317) skip switch: Dimmer Switch 55 SceneCycle.status 2022-05-10 23:06:23.876 - [32minfo[39m: hue.0 (317) skip switch: Dimmer Switch 57 SceneCycle.status 2022-05-10 23:06:23.918 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor.alert 2022-05-10 23:06:23.919 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor.sensitivity 2022-05-10 23:06:23.919 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor.sensitivitymax 2022-05-10 23:06:23.920 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor.ledindication 2022-05-10 23:06:23.920 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor.usertest 2022-05-10 23:06:23.931 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor.alert 2022-05-10 23:06:23.932 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor.tholddark 2022-05-10 23:06:23.933 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor.tholdoffset 2022-05-10 23:06:23.933 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor.ledindication 2022-05-10 23:06:23.934 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor.usertest 2022-05-10 23:06:23.942 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 1.alert 2022-05-10 23:06:23.943 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 1.ledindication 2022-05-10 23:06:23.944 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 1.usertest 2022-05-10 23:06:23.955 - [32minfo[39m: hue.0 (317) skip switch: cycling.status 2022-05-10 23:06:23.967 - [32minfo[39m: hue.0 (317) skip switch: cycleState.status 2022-05-10 23:06:23.976 - [32minfo[39m: hue.0 (317) skip switch: Start and stop.status 2022-05-10 23:06:23.983 - [33mwarn[39m: hue.0 (317) channel "Start_and_stop" already exists, using "Start_and_stop_CLIPGenericStatus" for sensor 130 2022-05-10 23:06:23.984 - [32minfo[39m: hue.0 (317) skip switch: Start and stop CLIPGenericStatus.status 2022-05-10 23:06:23.990 - [32minfo[39m: hue.0 (317) skip switch: dimDirection.status 2022-05-10 23:06:24.002 - [32minfo[39m: hue.0 (317) skip switch: isDimming.status 2022-05-10 23:06:24.006 - [32minfo[39m: hue.0 (317) skip switch: slotState.status 2022-05-10 23:06:24.010 - [33mwarn[39m: hue.0 (317) channel "cycling" already exists, using "cycling_CLIPGenericStatus" for sensor 139 2022-05-10 23:06:24.014 - [32minfo[39m: hue.0 (317) skip switch: cycling CLIPGenericStatus.status 2022-05-10 23:06:24.022 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor Haustüre.alert 2022-05-10 23:06:24.023 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor Haustüre.sensitivity 2022-05-10 23:06:24.023 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor Haustüre.sensitivitymax 2022-05-10 23:06:24.028 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor Haustüre.ledindication 2022-05-10 23:06:24.030 - [32minfo[39m: hue.0 (317) skip switch: Garten Sensor Haustüre.usertest 2022-05-10 23:06:24.039 - [33mwarn[39m: hue.0 (317) channel "Hue_outdoor_ambient_light_sensor" already exists, using "Hue_outdoor_ambient_light_sensor_ZLLLightLevel" for sensor 141 2022-05-10 23:06:24.040 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor ZLLLightLevel.alert 2022-05-10 23:06:24.040 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor ZLLLightLevel.tholddark 2022-05-10 23:06:24.041 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor ZLLLightLevel.tholdoffset 2022-05-10 23:06:24.041 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor ZLLLightLevel.ledindication 2022-05-10 23:06:24.042 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor ambient light sensor ZLLLightLevel.usertest 2022-05-10 23:06:24.055 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 2.alert 2022-05-10 23:06:24.056 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 2.ledindication 2022-05-10 23:06:24.057 - [32minfo[39m: hue.0 (317) skip switch: Hue outdoor temperature sensor 2.usertest 2022-05-10 23:06:24.069 - [32minfo[39m: hue.0 (317) skip switch: roomstate.status 2022-05-10 23:06:24.099 - [32minfo[39m: hue.0 (317) skip switch: presenceState.status 2022-05-10 23:06:24.117 - [32minfo[39m: hue.0 (317) skip switch: timeBasedSlotState.status 2022-05-10 23:06:24.125 - [32minfo[39m: hue.0 (317) skip switch: timeBasedCycling.status 2022-05-10 23:06:24.137 - [32minfo[39m: hue.0 (317) skip switch: needToTurnOn.status 2022-05-10 23:06:24.148 - [33mwarn[39m: hue.0 (317) channel "Küche_oben" already exists, using "Küche_oben_ZLLPresence" for sensor 195 2022-05-10 23:06:24.148 - [32minfo[39m: hue.0 (317) skip switch: Küche oben ZLLPresence.alert 2022-05-10 23:06:24.152 - [32minfo[39m: hue.0 (317) skip switch: Küche oben ZLLPresence.sensitivity 2022-05-10 23:06:24.152 - [32minfo[39m: hue.0 (317) skip switch: Küche oben ZLLPresence.sensitivitymax 2022-05-10 23:06:24.155 - [32minfo[39m: hue.0 (317) skip switch: Küche oben ZLLPresence.ledindication 2022-05-10 23:06:24.163 - [32minfo[39m: hue.0 (317) skip switch: Küche oben ZLLPresence.usertest 2022-05-10 23:06:24.177 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 5.alert 2022-05-10 23:06:24.183 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 5.tholddark 2022-05-10 23:06:24.184 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 5.tholdoffset 2022-05-10 23:06:24.186 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 5.ledindication 2022-05-10 23:06:24.188 - [32minfo[39m: hue.0 (317) skip switch: Hue ambient light sensor 5.usertest 2022-05-10 23:06:24.210 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 5.alert 2022-05-10 23:06:24.212 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 5.ledindication 2022-05-10 23:06:24.212 - [32minfo[39m: hue.0 (317) skip switch: Hue temperature sensor 5.usertest 2022-05-10 23:06:24.226 - [33mwarn[39m: hue.0 (317) channel "presenceState" already exists, using "presenceState_CLIPGenericStatus" for sensor 208 2022-05-10 23:06:24.229 - [32minfo[39m: hue.0 (317) skip switch: presenceState CLIPGenericStatus.status 2022-05-10 23:06:24.237 - [32minfo[39m: hue.0 (317) skip switch: textState.status 2022-05-10 23:06:24.238 - [32minfo[39m: hue.0 (317) created/updated 46 sensor channels 2022-05-10 23:06:25.002 - [32minfo[39m: shelly.0 (287) [CoAP] Device 192.168.178.157 (shellyswitch25 / shellyswitch25-98CDAC38AE0F / SHSW-25#98CDAC38AE0F#1) connected! Polltime set to 15 sec. 2022-05-10 23:06:25.887 - [32minfo[39m: hue.0 (317) created/updated 25 light channels 2022-05-10 23:06:25.904 - [33mwarn[39m: hue.0 (317) channel "Decke" already exists, using "Decke_LightGroup" for group 2 2022-05-10 23:06:25.928 - [33mwarn[39m: hue.0 (317) channel "Küche" already exists, using "Küche_Room" for group 7 2022-05-10 23:06:25.975 - [33mwarn[39m: hue.0 (317) channel "Küche_oben" already exists, using "Küche_oben_Room" for group 14 2022-05-10 23:06:25.981 - [33mwarn[39m: hue.0 (317) channel "Garten" already exists, using "Garten_Room" for group 17 2022-05-10 23:06:25.991 - [33mwarn[39m: hue.0 (317) channel "Custom_group_for_$lights" already exists, using "Custom_group_for_$lights_LightGroup" for group 21 2022-05-10 23:06:25.993 - [32minfo[39m: hue.0 (317) created/updated 17 groups channels 2022-05-10 23:06:26.037 - [32minfo[39m: hue.0 (317) created/updated 184 scenes 2022-05-10 23:06:26.038 - [32minfo[39m: hue.0 (317) creating/updating bridge device 2022-05-10 23:06:26.083 - [32minfo[39m: shelly.1 (332) starting. Version 5.3.2 in /opt/iobroker/node_modules/iobroker.shelly, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:26.307 - [32minfo[39m: shelly.1 (332) Starting in MQTT mode. Listening on 0.0.0.0:1884 2022-05-10 23:06:26.593 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.discovery.0 started with pid 359 2022-05-10 23:06:29.326 - [32minfo[39m: shelly.0 (287) [CoAP] Device 192.168.180.102 (shellyplug-s / shellyplug-s-16CE7A / SHPLG2-1#16CE7A#1) connected! Polltime set to 15 sec. 2022-05-10 23:06:29.783 - [32minfo[39m: discovery.0 (359) starting. Version 2.7.5 in /opt/iobroker/node_modules/iobroker.discovery, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:30.540 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.backitup.0 started with pid 375 2022-05-10 23:06:32.862 - [32minfo[39m: shelly.0 (287) [CoAP] Device 192.168.178.183 (shellyswitch25 / shellyswitch25-E8DB84803175 / SHSW-25#E8DB84803175#1) connected! Polltime set to 15 sec. 2022-05-10 23:06:33.034 - [32minfo[39m: backitup.0 (375) starting. Version 2.3.3 in /opt/iobroker/node_modules/iobroker.backitup, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:33.138 - [32minfo[39m: backitup.0 (375) [iobroker] backup was activated at 02:40 every 1 day(s) 2022-05-10 23:06:34.502 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.web.0 started with pid 390 2022-05-10 23:06:37.422 - [32minfo[39m: web.0 (390) starting. Version 4.2.0 in /opt/iobroker/node_modules/iobroker.web, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:37.949 - [32minfo[39m: web.0 (390) socket.io server listening on port 8082 2022-05-10 23:06:37.957 - [32minfo[39m: alexa2.0 (267) Subscribing to states... 2022-05-10 23:06:37.964 - [32minfo[39m: web.0 (390) http server listening on port 8082 2022-05-10 23:06:38.497 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.fritzdect.0 started with pid 405 2022-05-10 23:06:40.608 - [32minfo[39m: fritzdect.0 (405) starting. Version 2.2.3 in /opt/iobroker/node_modules/iobroker.fritzdect, node: v14.19.1, js-controller: 4.0.15 2022-05-10 23:06:40.637 - [32minfo[39m: fritzdect.0 (405) fritzdect entered ready 2022-05-10 23:06:40.669 - [32minfo[39m: fritzdect.0 (405) fritzdect uses USER: fbsmarthome 2022-05-10 23:06:41.484 - [32minfo[39m: fritzdect.0 (405) checking user permissions 2022-05-10 23:06:41.648 - [32minfo[39m: fritzdect.0 (405) the rights are : {"Name":"HomeAuto","Access":"2"} 2022-05-10 23:06:41.649 - [32minfo[39m: fritzdect.0 (405) start creating devices/groups 2022-05-10 23:06:41.756 - [32minfo[39m: web.0 (390) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:06:41.926 - [32minfo[39m: fritzdect.0 (405) CREATE Devices 4 2022-05-10 23:06:41.980 - [32minfo[39m: fritzdect.0 (405) setting up switch 2022-05-10 23:06:41.986 - [32minfo[39m: fritzdect.0 (405) setting up temperatur 2022-05-10 23:06:41.988 - [32minfo[39m: fritzdect.0 (405) setting up switch 2022-05-10 23:06:42.044 - [32minfo[39m: fritzdect.0 (405) setting up temperatur 2022-05-10 23:06:42.058 - [32minfo[39m: fritzdect.0 (405) setting up thermostat 2022-05-10 23:06:42.068 - [32minfo[39m: fritzdect.0 (405) setting up powermeter 2022-05-10 23:06:42.073 - [32minfo[39m: fritzdect.0 (405) setting up temperatur 2022-05-10 23:06:42.076 - [32minfo[39m: fritzdect.0 (405) setting up powermeter 2022-05-10 23:06:42.120 - [32minfo[39m: fritzdect.0 (405) setting up simpleonoff 2022-05-10 23:06:42.121 - [32minfo[39m: fritzdect.0 (405) setting up temperatur 2022-05-10 23:06:42.129 - [32minfo[39m: fritzdect.0 (405) setting up simpleonoff 2022-05-10 23:06:42.255 - [32minfo[39m: fritzdect.0 (405) setting up thermostat nextchange 2022-05-10 23:06:42.333 - [32minfo[39m: fritzdect.0 (405) State value to set for "fritzdect.0.DECT_109710995216.windowopenactivetime" has to be type "number" but received type "string" 2022-05-10 23:06:42.372 - [32minfo[39m: fritzdect.0 (405) State value to set for "fritzdect.0.DECT_109710995216.boostactivetime" has to be type "number" but received type "string" 2022-05-10 23:06:42.454 - [32minfo[39m: fritzdect.0 (405) CREATE groups 1 2022-05-10 23:06:45.518 - [32minfo[39m: fritzdect.0 (405) setting up groupinfo 2022-05-10 23:06:46.981 - [32minfo[39m: fritzdect.0 (405) setting up thermostat 2022-05-10 23:06:49.733 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.lg-thinq.0 started with pid 1260 2022-05-10 23:06:49.738 - [32minfo[39m: sonoff.0 (194) Client [Smartmeter] connected with secret 1652216809655_8075 2022-05-10 23:06:53.875 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.mercedesme.0 started with pid 1484 2022-05-10 23:06:54.367 - [32minfo[39m: host.buanet-iobroker1 instance system.adapter.sourceanalytix.0 started with pid 1516 2022-05-10 23:06:54.573 - [32minfo[39m: fritzdect.0 (405) setting up thermostat nextchange 2022-05-10 23:06:54.933 - [32minfo[39m: fritzdect.0 (405) State value to set for "fritzdect.0.DECT_grpEFC2DD-3CA0C0661.windowopenactivetime" has to be type "number" but received type "string" 2022-05-10 23:06:54.972 - [32minfo[39m: fritzdect.0 (405) State value to set for "fritzdect.0.DECT_grpEFC2DD-3CA0C0661.boostactivetime" has to be type "number" but received type "string" 2022-05-10 23:06:55.099 - [32minfo[39m: fritzdect.0 (405) finished creating devices/groups (if any) 2022-05-10 23:06:55.100 - [32minfo[39m: fritzdect.0 (405) start creating templates 2022-05-10 23:06:55.555 - [32minfo[39m: fritzdect.0 (405) finished creating templates (if any) 2022-05-10 23:06:55.558 - [32minfo[39m: fritzdect.0 (405) start initial updating devices/groups 2022-05-10 23:07:00.450 - [32minfo[39m: fritzdect.0 (405) finished initial updating devices/groups 2022-05-10 23:07:00.450 - [32minfo[39m: fritzdect.0 (405) going over to cyclic polling, messages to poll activity only in debug-mode 2022-05-10 23:07:08.772 - [32minfo[39m: web.0 (390) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:07:10.386 - [32minfo[39m: web.0 (390) ==> Connected system.user.admin from ::ffff:192.168.180.89 2022-05-10 23:07:14.589 - [33mwarn[39m: lg-thinq.0 (1260) slow connection to objects DB. Still waiting ... 2022-05-10 23:07:17.221 - [32minfo[39m: shelly.1 (332) [MQTT] Device 192.168.178.109 (shellyplus1pm / shellyplus1pm-7c87ce64d6d0 / shellyplus1pm#7c87ce64d6d0#1) connected! Polltime set to 5 sec. 2022-05-10 23:07:17.652 - [33mwarn[39m: sourceanalytix.0 (1516) slow connection to objects DB. Still waiting ... 2022-05-10 23:07:17.705 - [32minfo[39m: shelly.1 (332) [MQTT] Device 192.168.180.97 (shellyplus1pm / shellyplus1pm-3c610579db50 / shellyplus1pm#3c610579db50#1) connected! Polltime set to 5 sec. 2022-05-10 23:07:24.725 - [33mwarn[39m: mercedesme.0 (1484) slow connection to objects DB. Still waiting ... -
@vo5tr0 STrange ... Log stoppt 23:03:52.694 ... WIe sieht es denn RAMM mäßig aus? Vllt ist da ja was und er Swappt sich zu Tode?
-
Danke für die Tipps, das werde ich mir Mal anschauen. Leider habe ich in dem Moment nur ein paar Sekunden Zeit um noch irgendwas zu tun, bis es wieder weg ist...
Könnte es eventuell am Arbeitsspeicher hängen? Das war hardwaretechnisch die einzige Änderung, die ich am NAS vorgenommen habe. Ein 4GB Modul von Crucial nachgesteckt.
-
@vo5tr0 sagte in Synology NAS hängt sich auf:
Ein 4GB Modul von Crucial nachgesteckt.
Auch das wäre ne valide Option meiner (an der Stelle) Laien-Meinung nach
-
@vo5tr0 sagte in Synology NAS hängt sich auf:
Es liegt definitiv nicht an den Scripten. Habe alle abgeschaltet,
Auch danach den Container neu gestartet , bzw. mit
ps auxww|grep ioüberprüft , ob Zombies noch laufen .
Zeige doch mal was du so hast :
iobroker update -i iobroker list instances iobroker list adapterssudo ln -s /usr/bin/node /usr/bin/nodejs uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs -
Nein, den Container habe ich danach nicht neugestartet, wusste nicht, dass das nötig ist
root@buanet-iobroker1:/opt/iobroker# iobroker update -i Used repository: stable Adapter "admin" : 5.3.8 , installed 5.3.8 Adapter "alexa2" : 3.11.2 , installed 3.11.2 Adapter "backitup" : 2.4.6 , installed 2.4.6 Adapter "discovery" : 3.0.3 , installed 3.0.3 Adapter "dysonairpurifier": 2.5.1 , installed 2.5.1 Adapter "flot" : 1.10.7 , installed 1.10.7 Adapter "fritzdect" : 2.2.3 , installed 2.2.3 Adapter "history" : 1.11.1 , installed 1.11.1 Adapter "hue" : 3.6.5 , installed 3.6.5 Adapter "iot" : 1.11.4 , installed 1.11.4 Adapter "javascript" : 5.2.21 , installed 5.2.21 Controller "js-controller": 4.0.23 , installed 4.0.15 [Updatable] Adapter "lg-thinq" : 0.0.7 , installed 0.0.7 Adapter "mercedesme" : 0.0.56 , installed 0.0.56 Adapter "meross" : 1.10.5 , installed 1.10.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "ocpp" : 0.4.0 , installed 0.4.0 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "radar2" : 2.0.3 , installed 2.0.3 Adapter "shelly" : 5.3.2 , installed 5.3.2 Adapter "simple-api" : 2.6.4 , installed 2.6.5 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "telegram" : 1.12.2 , installed 1.12.2 Adapter "text2command" : 2.2.1 , installed 2.2.1 Adapter "web" : 4.2.3 , installed 4.2.3 Adapter "ws" : 1.2.0 , installed 1.3.0 root@buanet-iobroker1:/opt/iobroker# iobroker list instances + system.adapter.admin.0 : admin : buanet-iobroker1 - enabled, p ort: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : buanet-iobroker1 - enabled + system.adapter.alexa2.1 : alexa2 : buanet-iobroker1 - enabled + system.adapter.backitup.0 : backitup : buanet-iobroker1 - enabled + system.adapter.discovery.0 : discovery : buanet-iobroker1 - enabled system.adapter.dysonairpurifier.0 : dysonairpurifier : buanet-iobroker1 - disabled system.adapter.dysonairpurifier.1 : dysonairpurifier : buanet-iobroker1 - disabled system.adapter.flot.0 : flot : buanet-iobroker1 - enabled + system.adapter.fritzdect.0 : fritzdect : buanet-iobroker1 - enabled + system.adapter.history.0 : history : buanet-iobroker1 - enabled system.adapter.hue.0 : hue : buanet-iobroker1 - disabled, p ort: 443 system.adapter.iot.0 : iot : buanet-iobroker1 - disabled + system.adapter.javascript.0 : javascript : buanet-iobroker1 - enabled + system.adapter.lg-thinq.0 : lg-thinq : buanet-iobroker1 - enabled + system.adapter.mercedesme.0 : mercedesme : buanet-iobroker1 - enabled + system.adapter.meross.0 : meross : buanet-iobroker1 - enabled system.adapter.ocpp.0 : ocpp : buanet-iobroker1 - disabled, p ort: 9220 system.adapter.ping.0 : ping : buanet-iobroker1 - disabled system.adapter.radar2.0 : radar2 : buanet-iobroker1 - disabled + system.adapter.shelly.0 : shelly : buanet-iobroker1 - enabled, p ort: 1885, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : buanet-iobroker1 - enabled, p ort: 1884, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : buanet-iobroker1 - enabled, p ort: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : buanet-iobroker1 - enabled system.adapter.switchbot-hub.0 : switchbot-hub : buanet-iobroker1 - disabled + system.adapter.telegram.0 : telegram : buanet-iobroker1 - enabled, p ort: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : buanet-iobroker1 - disabled + system.adapter.web.0 : web : buanet-iobroker1 - enabled, p ort: 8082, bind: 0.0.0.0, run as: admin + instance is alive root@buanet-iobroker1:/opt/iobroker# iobroker list adapters system.adapter.admin : admin - v5.3.8 system.adapter.alexa2 : alexa2 - v3.11.2 system.adapter.backitup : backitup - v2.4.6 system.adapter.discovery : discovery - v3.0.3 system.adapter.dysonairpurifier : dysonairpurifier - v2.5.1 system.adapter.flot : flot - v1.10.7 system.adapter.fritzdect : fritzdect - v2.2.3 system.adapter.history : history - v1.11.1 system.adapter.hue : hue - v3.6.5 system.adapter.iot : iot - v1.11.4 system.adapter.javascript : javascript - v5.2.21 system.adapter.lg-thinq : lg-thinq - v0.0.7 system.adapter.mercedesme : mercedesme - v0.0.56 system.adapter.meross : meross - v1.10.5 system.adapter.mihome : mihome - v1.4.0 system.adapter.ocpp : ocpp - v0.4.0 system.adapter.ping : ping - v1.5.3 system.adapter.radar2 : radar2 - v2.0.3 system.adapter.shelly : shelly - v5.3.2 system.adapter.sonoff : sonoff - v2.5.1 system.adapter.sourceanalytix : sourceanalytix - v0.4.14 system.adapter.switchbot-hub : switchbot-hub - v0.1.2 system.adapter.telegram : telegram - v1.12.2 system.adapter.text2command : text2command - v2.2.1 system.adapter.web : web - v4.2.3 root@buanet-iobroker1:/opt/iobroker# sudo ln -s /usr/bin/node /usr/bin/nodejs sudo: unable to resolve host buanet-iobroker1: Name or service not known ln: failed to create symbolic link '/usr/bin/nodejs': File exists root@buanet-iobroker1:/opt/iobroker# uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs x86_64 /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.19.1 v14.19.1 sudo: unable to resolve host buanet-iobroker1: Name or service not known 6.14.16 root /opt/iobroker sudo: unable to resolve host buanet-iobroker1: Name or service not known Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 https://deb.nodesource.com/node_14.x bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done 5 packages can be upgraded. Run 'apt list --upgradable' to see them. nodejs: Installed: 14.19.1-deb-1nodesource1 Candidate: 14.19.2-deb-1nodesource1 Version table: 14.19.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x bullseye/main amd64 Packages *** 14.19.1-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages -
@vo5tr0 In jedem Fall mal sicherheitshalber controller updated. sicher ist sicher
-
Ich habe entweder den History Adapter oder Flot in Verdacht. Was auch immer das da treibt, aber gerade wollte ich über Flot das Diagramm zum Stromverbrauch abrufen und plötzlich war die Auslastung wieder bei 100%. Dieses Mal hat es sich zum Glück aber nach ein paar Minuten wieder gefangen.
-
@vo5tr0 Was macht denn "dieses Diagramm"?
HIntergrund: History startet für jede Datenanfrage einen weiteren Prozess damit der Adapterprozess nicht blockiert wird. Dann werden die Daten aus den JSON Files gelesen - je nach Dauer kann das einigen sein und die werden dann verarbeitet.
-
@vo5tr0 sagte in Synology NAS hängt sich auf:
und plötzlich war die Auslastung wieder bei 100%
bitte nicht so auf die visuelle Anzeige schauen .. das ist nur eine grobe Anzeige .
Ich habe auch eine Synology DS918+ , mit 16 Gb und habe manchmal den selben Effekt " Lichtspiel " im ioBroker Container , jenachdem .... was mit ioBroker gerade gemacht wird !
Wenn ich das bei mir immer beobachen würde bei jedem Spriptstart / Adapterstart usw. , wäre das unsinnig .......
Ausschlaggebend ist das Prozess Log , aber das sieht bei dir gerade harmlos aus ...
Du kannst auch hier die Filteranzeige setzen ....
EDIT:
IO Broker läuft bei mir auf meiner Synology DS918+ im Docker Container.
und was hast du sonst noch nebenbei auf deiner Synology laufen !?
-
Das Diagramm zeigt mir 3 Werte an: Den aktuellen Stromverbrauch + Zählerstand über den Sonoff Adapter + Was gerade von der Balkonanlage eingespeist wird über den Shelly Adapter
@Glasfaser
klar, dass es mal kurz auf 100% springt ist normal. Aber in dem Fall bleibt es halt da für eine längere Zeit. Im Docker Fenster und gleichzeitig auch die Auslastung vom NAS selbst.Neben iobroker habe ich noch Plex (kein Docker container), Portainer und Paperless laufen.
Das Teil hängt sich auch nicht irgendwann in der Nacht auf oder so, sondern immer dann wenn ich kurz vorher das Diagramm aufgerufen habe. Merken tue ich es auch daran, dass das Diagramm nicht mehr lädt oder wenn der Tab im Hintergrund noch offen war, alles voll mit kreuz und quer laufenden Linien ist. Dann habe ich noch kurz Zeit mich auf der DS Oberfläche umzuschauen. Ich weiß nicht, ob es sicher am Diagramm liegt oder nicht, aber irgendwas das ich in dem Moment mache, muss das Problem auslösen.
-
@vo5tr0 Aber dann sollten da maximal 3 (!) Prozesse kurz laufen (auch weils nur 1 Tag ist) und nicht so viele ... es sei denn du hast das Chart auf gefühlten 10 Tabs offen
Vllt mal Adapzter debug log aktivieren und schauen was so zu sehen ist
-
@apollon77 sagte in Synology NAS hängt sich auf:
@vo5tr0 In jedem Fall mal sicherheitshalber controller updated. sicher ist sicher
Hast du das gemacht !?
-
Das denke ich mir auch
Nein, das Chart ist maximal auf zwei Tabs offen (Einmal der Editor, einmal Vollbild)Dann schaue ich Mal, was das debug Log spricht.
@Glasfaser
Ja, ist aktuell -
Ich denke es ist noch zu früh das zu sagen, aber bisher sieht es super aus
Dinge, die ich gemacht habe:
- Docker Container CPU Priorität auf Low gestellt
- Update aller io Broker Komponenten
- Flot Diagramm Live Update deaktiviert
- Daten nicht mehr direkt vom Adapter genommen, sondern per Script in eigene Datenpunkte geschrieben und von da aus geloggt
Seit dem habe ich den History Prozess kaum bis gar nicht mehr in der Liste gesehen und die Auslastung war auch durchgehend sehr niedrig. Also mindestens eine der Aktionen hat geholfen
