iobroker läuft nicht mehr

Thomas Braun

Das ist ein alter Raspberry.
Der muss bezüglich nodejs besonders/anders angepackt werden. In meinem nodejs-HowTo wird das aber auch erwähnt. Schau mal rein

Der hat 512MB RAM, oder? Das dürfte kaum für eine
sinnvollen Betrieb ausreichen. Das Doppelte ist schon schwierig.

Emi 0

@thomas-braun

Habe ich versucht aber v14 wird nicht gefunden:

micros02@smartmeter:~ $ wget https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
--2022-04-30 16:45:25--  https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2022-04-30 16:45:26 ERROR 404: Not Found.

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

VERSION muss ersetzt werden.

Statt

wget https://unofficial-builds.nodejs.org/download/release/VERSION/node-vVERSION-linux-armv6l.tar.xz

also

wget https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz

Emi 0

@thomas-braun

ja, der hat 512MB. Hat, wie gesagt, seit März gut funktioniert. Er liest nur alle 5s die aktuelle Leistung und den Stromverbrauch über einen Infrarot-Lesekopf aus und schreibt die Werte in je eine json-Datei.

Emi 0

@thomas-braun

ich hatte VERSION durch 14 ersetzt.
Anscheinend ist die aktuelle Version 14.19.1
Das wusste ich nicht.
Jetzt habe ich dieses Ergebnis:

micros02@smartmeter:~ $ micros02@smartmeter:~ $ wget https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
--2022-04-30 16:45:25--  https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2022-04-30 16:45:26 ERROR 404: Not Found.
wget https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz
-bash: micros02@smartmeter:~: command not found
-bash: --2022-04-30: command not found
-bash: syntax error near unexpected token `('
-bash: syntax error near unexpected token `('
-bash: HTTP: command not found
-bash: 2022-04-30: command not found
--2022-04-30 17:07:41--  https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 19453756 (19M) [application/x-xz]
Saving to: ‘node-v14.19.1-linux-armv6l.tar.xz’

node-v14.19.1-linux 100%[===================>]  18.55M  2.90MB/s    in 6.8s

2022-04-30 17:07:48 (2.73 MB/s) - ‘node-v14.19.1-linux-armv6l.tar.xz’ saved [19453756/19453756]

Thomas Braun

@emi-0

Dann ist das Archiv jetzt heruntergeladen worden.
Also weiter im Text.

VERSION wie gehabt ersetzen. Die Tab-Taste ist dein Freund.

tar -xvf node-vVERSION-linux-armv6l.tar.xz
cd node-vVERSION-linux-armv6l/
sudo cp -R * /usr/local/
sudo ln -s /usr/local/bin/node /usr/local/bin/nodejs
sudo reboot

Emi 0

@thomas-braun

habe alle Schritte ausgeführt und die nodejs-Installation geprüft:

micros02@smartmeter:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs
ln: failed to create symbolic link '/usr/bin/nodejs': File exists
micros02@smartmeter:~ $ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
/usr/local/bin/nodejs
/usr/local/bin/node
/usr/local/bin/npm
v14.19.1
v14.19.1
6.14.16
micros02
/home/micros02
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
nodejs:
  Installed: (none)
  Candidate: 12.22.5~dfsg-2~11u1
  Version table:
     12.22.5~dfsg-2~11u1 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

nodeJS passt nun.

Die beiden Updates noch einspielen:

2 packages can be upgraded

sudo apt full-upgrade

Emi 0

@thomas-braun

das hat funktioniert:

micros02@smartmeter:~ $ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  gyp javascript-common libc-ares2 libjs-highlight.js libjs-inherits
  libjs-is-typedarray libjs-psl libjs-typedarray-to-buffer libnode-dev
  libnode72 libssl-dev libuv1-dev xdg-utils
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  libexpat1 libexpat1-dev
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 198 kB of archives.
After this operation, 3,072 B of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libexpat1-dev armhf 2.2.10-2+deb11u3 [123 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libexpat1 armhf 2.2.10-2+deb11u3 [74.9 kB]
Fetched 198 kB in 1s (182 kB/s)
Reading changelogs... Done
(Reading database ... 49910 files and directories currently installed.)
Preparing to unpack .../libexpat1-dev_2.2.10-2+deb11u3_armhf.deb ...
Unpacking libexpat1-dev:armhf (2.2.10-2+deb11u3) over (2.2.10-2+deb11u2) ...
Preparing to unpack .../libexpat1_2.2.10-2+deb11u3_armhf.deb ...
Unpacking libexpat1:armhf (2.2.10-2+deb11u3) over (2.2.10-2+deb11u2) ...
Setting up libexpat1:armhf (2.2.10-2+deb11u3) ...
Setting up libexpat1-dev:armhf (2.2.10-2+deb11u3) ...
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ...
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

Jetzt noch

sudo apt autoremove

um den überflüssigen Rest auch noch loszuwerden.

Emi 0

@thomas-braun

das hat jetzt auch funktioniert:

micros02@smartmeter:~ $ sudo apt autoremove
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
micros02@smartmeter:~ $

Thomas Braun

@emi-0
Dann dürfte die nodeJS-Laufzeitumgebung jetzt sauber sein.

Emi 0

@thomas-braun

leider lässt sich iobroker immer noch nicht starten

micros02@smartmeter:~ $ iobroker fix
library: loaded
Library version=2022-02-10

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2022-02-13

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/3)
==========================================================================

Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done
Installed gcc-c++
Installed python-dev

==========================================================================
    Checking ioBroker user and directory permissions (2/3)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Checking autostart (3/3)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

micros02@smartmeter:~ $ iobroker start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

/opt/iobroker/iobroker-data/objects.jsonl

ls  -l /opt/iobroker/iobroker-data/objects.jsonl
sudo lsof /opt/iobroker/iobroker-data/objects.jsonl

Emi 0

@thomas-braun

micros02@smartmeter:~ $ ls  -l /opt/iobroker/iobroker-data/objects.jsonl
-rw-rwxr--+ 1 iobroker iobroker 120034159 Apr 25 21:05 /opt/iobroker/iobroker-data/objects.jsonl
micros02@smartmeter:~ $ sudo lsof /opt/iobroker/iobroker-data/objects.jsonl
COMMAND    PID     USER   FD   TYPE DEVICE  SIZE/OFF   NODE NAME
iobroker. 1919 iobroker   19u   REG  179,2 120034159 268535 /opt/iobroker/iobroker-data/objects.jsonl
micros02@smartmeter:~ $ iob start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Thomas Braun

@emi-0

getfacl /opt/iobroker/iobroker-data/objects.jsonl

Emi 0

@thomas-braun

geht noch nicht:

micros02@smartmeter:~ $
getfacl /opt/iobroker/iobroker-data/objects.jsonl
-bash: micros02@smartmeter:~: command not found
-bash: -rw-rwxr--+: command not found
-bash: micros02@smartmeter:~: command not found
-bash: COMMAND: command not found
-bash: iobroker.: command not found
-bash: micros02@smartmeter:~: command not found
-bash: micros02@smartmeter:~: command not found
-bash: Server: command not found
-bash: micros02@smartmeter:~: command not found
getfacl: Removing leading '/' from absolute path names
# file: opt/iobroker/iobroker-data/objects.jsonl
# owner: iobroker
# group: iobroker
user::rw-
group::r--
group:iobroker:rwx
mask::rwx
other::r--

micros02@smartmeter:~ $ iob start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Thomas Braun

@emi-0

Da stimmen die Rechte nicht.
Auf meinem System schauen die anders aus.
Aber erstmal Sportschau gucken...

Emi 0

@thomas-braun

erstmal vielen Dank
Viel Spaß bei der Sportschau.
Bis Morgen ....

Emi 0

@thomas-braun

Hallo Thomas,
kannst Du bitte noch etwas zu den Rechten sagen, wie sie aussehen müssen, dass iobroker wieder gestartet werden kann?

Community Forum

NEWS

iobroker läuft nicht mehr

Support us

521

32.5k

81.7k

1.3m