iobroker läuft nicht mehr

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

Da fehlt die Datei nodesource.list
Dafür hast du da nodesource.list.save.xy drin. Die werden nicht eingelesen, nur Dateiendungen .list werden berücksichtigt.

Thomas Braun

@thomas-braun

sudo rm /etc/apt/sources.list.d/nodesource.li*
sudo apt remove nodejs*
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash
sudo apt update
sudo apt install nodejs
sudo ln -s /usr/bin/node /usr/bin/nodejs

Emi 0

@thomas-braun

habe alle Schritte wie beschrieben ausgeführt.
Bleibt bei v12.22.5.
Kann iobroker nicht starten.
Kann es darab liegen, dass ich einen raspi zero verwende?

micros02@smartmeter:~ $ iobroker start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $ which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs
/usr/bin/nodejs
/usr/bin/node
micros02@smartmeter:~ $ nodejs -v
v12.22.5
micros02@smartmeter:~ $ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
/usr/bin/nodejs
/usr/bin/node
micros02@smartmeter:~ $ uname -a
Linux smartmeter 5.15.32+ #1538 Thu Mar 31 19:37:58 BST 2022 armv6l GNU/Linux
micros02@smartmeter:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye
micros02@smartmeter:~ $

Thomas Braun

@emi-0

Das ist ein alter Raspberry.
Der muss bezüglich nodejs besonders/anders angepackt werden. In meinem nodejs-HowTo wird das aber auch erwähnt. Schau mal rein

Der hat 512MB RAM, oder? Das dürfte kaum für eine
sinnvollen Betrieb ausreichen. Das Doppelte ist schon schwierig.

Emi 0

@thomas-braun

Habe ich versucht aber v14 wird nicht gefunden:

micros02@smartmeter:~ $ wget https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
--2022-04-30 16:45:25--  https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2022-04-30 16:45:26 ERROR 404: Not Found.

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

VERSION muss ersetzt werden.

Statt

wget https://unofficial-builds.nodejs.org/download/release/VERSION/node-vVERSION-linux-armv6l.tar.xz

also

wget https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz

Emi 0

@thomas-braun

ja, der hat 512MB. Hat, wie gesagt, seit März gut funktioniert. Er liest nur alle 5s die aktuelle Leistung und den Stromverbrauch über einen Infrarot-Lesekopf aus und schreibt die Werte in je eine json-Datei.

Emi 0

@thomas-braun

ich hatte VERSION durch 14 ersetzt.
Anscheinend ist die aktuelle Version 14.19.1
Das wusste ich nicht.
Jetzt habe ich dieses Ergebnis:

micros02@smartmeter:~ $ micros02@smartmeter:~ $ wget https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
--2022-04-30 16:45:25--  https://unofficial-builds.nodejs.org/download/release/14/node-v14-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2022-04-30 16:45:26 ERROR 404: Not Found.
wget https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz
-bash: micros02@smartmeter:~: command not found
-bash: --2022-04-30: command not found
-bash: syntax error near unexpected token `('
-bash: syntax error near unexpected token `('
-bash: HTTP: command not found
-bash: 2022-04-30: command not found
--2022-04-30 17:07:41--  https://unofficial-builds.nodejs.org/download/release/v14.19.1/node-v14.19.1-linux-armv6l.tar.xz
Resolving unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)... 45.55.98.129
Connecting to unofficial-builds.nodejs.org (unofficial-builds.nodejs.org)|45.55.98.129|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 19453756 (19M) [application/x-xz]
Saving to: ‘node-v14.19.1-linux-armv6l.tar.xz’

node-v14.19.1-linux 100%[===================>]  18.55M  2.90MB/s    in 6.8s

2022-04-30 17:07:48 (2.73 MB/s) - ‘node-v14.19.1-linux-armv6l.tar.xz’ saved [19453756/19453756]

Thomas Braun

@emi-0

Dann ist das Archiv jetzt heruntergeladen worden.
Also weiter im Text.

VERSION wie gehabt ersetzen. Die Tab-Taste ist dein Freund.

tar -xvf node-vVERSION-linux-armv6l.tar.xz
cd node-vVERSION-linux-armv6l/
sudo cp -R * /usr/local/
sudo ln -s /usr/local/bin/node /usr/local/bin/nodejs
sudo reboot

Emi 0

@thomas-braun

habe alle Schritte ausgeführt und die nodejs-Installation geprüft:

micros02@smartmeter:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs
ln: failed to create symbolic link '/usr/bin/nodejs': File exists
micros02@smartmeter:~ $ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
/usr/local/bin/nodejs
/usr/local/bin/node
/usr/local/bin/npm
v14.19.1
v14.19.1
6.14.16
micros02
/home/micros02
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
nodejs:
  Installed: (none)
  Candidate: 12.22.5~dfsg-2~11u1
  Version table:
     12.22.5~dfsg-2~11u1 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

nodeJS passt nun.

Die beiden Updates noch einspielen:

2 packages can be upgraded

sudo apt full-upgrade

Emi 0

@thomas-braun

das hat funktioniert:

micros02@smartmeter:~ $ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  gyp javascript-common libc-ares2 libjs-highlight.js libjs-inherits
  libjs-is-typedarray libjs-psl libjs-typedarray-to-buffer libnode-dev
  libnode72 libssl-dev libuv1-dev xdg-utils
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  libexpat1 libexpat1-dev
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 198 kB of archives.
After this operation, 3,072 B of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libexpat1-dev armhf 2.2.10-2+deb11u3 [123 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libexpat1 armhf 2.2.10-2+deb11u3 [74.9 kB]
Fetched 198 kB in 1s (182 kB/s)
Reading changelogs... Done
(Reading database ... 49910 files and directories currently installed.)
Preparing to unpack .../libexpat1-dev_2.2.10-2+deb11u3_armhf.deb ...
Unpacking libexpat1-dev:armhf (2.2.10-2+deb11u3) over (2.2.10-2+deb11u2) ...
Preparing to unpack .../libexpat1_2.2.10-2+deb11u3_armhf.deb ...
Unpacking libexpat1:armhf (2.2.10-2+deb11u3) over (2.2.10-2+deb11u2) ...
Setting up libexpat1:armhf (2.2.10-2+deb11u3) ...
Setting up libexpat1-dev:armhf (2.2.10-2+deb11u3) ...
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u2) ...
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

Jetzt noch

sudo apt autoremove

um den überflüssigen Rest auch noch loszuwerden.

Emi 0

@thomas-braun

das hat jetzt auch funktioniert:

micros02@smartmeter:~ $ sudo apt autoremove
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
micros02@smartmeter:~ $

Thomas Braun

@emi-0
Dann dürfte die nodeJS-Laufzeitumgebung jetzt sauber sein.

Emi 0

@thomas-braun

leider lässt sich iobroker immer noch nicht starten

micros02@smartmeter:~ $ iobroker fix
library: loaded
Library version=2022-02-10

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2022-02-13

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/3)
==========================================================================

Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done
Installed gcc-c++
Installed python-dev

==========================================================================
    Checking ioBroker user and directory permissions (2/3)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Checking autostart (3/3)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

micros02@smartmeter:~ $ iobroker start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Thomas Braun

@emi-0 sagte in iobroker läuft nicht mehr:

/opt/iobroker/iobroker-data/objects.jsonl

ls  -l /opt/iobroker/iobroker-data/objects.jsonl
sudo lsof /opt/iobroker/iobroker-data/objects.jsonl

Emi 0

@thomas-braun

micros02@smartmeter:~ $ ls  -l /opt/iobroker/iobroker-data/objects.jsonl
-rw-rwxr--+ 1 iobroker iobroker 120034159 Apr 25 21:05 /opt/iobroker/iobroker-data/objects.jsonl
micros02@smartmeter:~ $ sudo lsof /opt/iobroker/iobroker-data/objects.jsonl
COMMAND    PID     USER   FD   TYPE DEVICE  SIZE/OFF   NODE NAME
iobroker. 1919 iobroker   19u   REG  179,2 120034159 268535 /opt/iobroker/iobroker-data/objects.jsonl
micros02@smartmeter:~ $ iob start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Thomas Braun

@emi-0

getfacl /opt/iobroker/iobroker-data/objects.jsonl

Emi 0

@thomas-braun

geht noch nicht:

micros02@smartmeter:~ $
getfacl /opt/iobroker/iobroker-data/objects.jsonl
-bash: micros02@smartmeter:~: command not found
-bash: -rw-rwxr--+: command not found
-bash: micros02@smartmeter:~: command not found
-bash: COMMAND: command not found
-bash: iobroker.: command not found
-bash: micros02@smartmeter:~: command not found
-bash: micros02@smartmeter:~: command not found
-bash: Server: command not found
-bash: micros02@smartmeter:~: command not found
getfacl: Removing leading '/' from absolute path names
# file: opt/iobroker/iobroker-data/objects.jsonl
# owner: iobroker
# group: iobroker
user::rw-
group::r--
group:iobroker:rwx
mask::rwx
other::r--

micros02@smartmeter:~ $ iob start
micros02@smartmeter:~ $ iob status
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
micros02@smartmeter:~ $

Community Forum

NEWS

iobroker läuft nicht mehr

Support us

330

32.5k

81.7k

1.3m