Adapter Update-Schleife bzw. wird nicht aktualisiert
-
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Einen Standarduser anlegen?
Aber in wie fern ist das störend ? Sorry für das naive oder vielleicht dämliche fragen, stehe da aber etwas auf dem Schlauch bzw. habe natürlich starkes Interesse daran es zu verstehen wieso man eben manches anders machen soll ( oft gehört es sich auch richtig gemacht das akzeptiere ich dann auch gerne )
Bisher ist mir dadurch nichts negatives aufgefallen oder meint Ihr auf Sicherheit bezogen weil es zu einfach ist ?Log kommt sofort wenn alles durchgelaufen ist.
Danke jetzt auch schon einmal für Eure Mühen mit mir
-
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Aber in wie fern ist das störend
weil es den "user iobroker" schon gibt, der wird dir ja bei der Installation von iobroker angelegt
-
@crunchip ok, Lösung wäre dann z.B. den User Marco anlegen in die Sudoer rein und mit dem über Putty drauf. Hoffe ich verstehe euch nicht völlig falsch
-
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Bisher ist mir dadurch nichts negatives aufgefallen oder meint Ihr auf Sicherheit bezogen weil es zu einfach ist ?
Wie loggst du dich denn als iobroker überhaupt ein? Denn der hat als Systemuser eigentlich gar kein Passwort.
Meine user (mit uid >= 1000) sehen z. B. so aus:
echad:x:1001:1001:,,,:/home/echad:/bin/bash iobroker:x:1002:1002::/home/iobroker:/usr/sbin/nologin pi:x:1000:1000:,,,:/home/pi:/bin/bashDer iobroker hat ein nologin gesetzt.
-
@thomas-braun Vielleicht liegt es daran das ich beim installieren von Debian den IoBroker demensprechend als Hautnutzer mit angelegt habe und dadurch hat er auch ein Passwort bekommen
-
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Vielleicht liegt es daran das ich beim installieren von Debian den IoBroker demensprechend als Hautnutzer mit angelegt habe
Siehe die Anmerkung von @crunchip , dass iobroker als Standard user name nicht die beste Wahl ist.
Maßgeblich ist zwar die uid/gid für die Besitzverhältnisse der Dateien, übersichtlicher macht es die ganze Angelegenheit jedenfalls nicht. Sollte man gerade vermeiden, wenn man nicht absolut sattelfest ist. -
@thomas-braun leuchtet mir ein.
zur UID über 1000 finde ich nuriobroker:1000 nobody:65534 -
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
BTT:
iobroker stop iobroker fix iobroker upgrade iobroker upgrade self iobroker startHier das gesamte Log der Befehle
iobroker@iobroker:/opt/iobroker$ iobroker stop iobroker@iobroker:/opt/iobroker$ iobroker fix library: loaded Library version=2022-02-10 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2022-02-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== OK:1 http://security.debian.org/debian-security bullseye-security InRelease OK:2 http://deb.debian.org/debian bullseye InRelease Holen:3 http://deb.debian.org/debian bullseye-updates InRelease [39,4 kB] Holen:4 http://ftp.debian.org/debian bullseye-backports InRelease [44,2 kB] OK:5 https://deb.nodesource.com/node_14.x bullseye InRelease Holen:6 http://ftp.debian.org/debian bullseye-backports/main amd64 Packages.diff/Index [63,3 kB] Holen:7 http://ftp.debian.org/debian bullseye-backports/main Translation-en.diff/Index [63,3 kB] Holen:8 http://ftp.debian.org/debian bullseye-backports/main amd64 Packages T-2022-03-07-2012.38-F-2022-03-07-2012.38.pdiff [3.878 B] Holen:8 http://ftp.debian.org/debian bullseye-backports/main amd64 Packages T-2022-03-07-2012.38-F-2022-03-07-2012.38.pdiff [3.878 B] Holen:9 http://ftp.debian.org/debian bullseye-backports/main Translation-en T-2022-03-07-2012.38-F-2022-03-07-2012.38.pdiff [3.142 B] Holen:9 http://ftp.debian.org/debian bullseye-backports/main Translation-en T-2022-03-07-2012.38-F-2022-03-07-2012.38.pdiff [3.142 B] Es wurden 217 kB in 1 s geholt (207 kB/s). Paketlisten werden gelesen… Fertig Installed gcc-c++ Installed python-dev ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== [sudo] Passwort für iobroker: Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:/opt/iobroker$ iobroker upgrade This upgrade of "deconz" will introduce the following changes: ========================================================================== -> 1.3.20: add retry if gateway is busy change min/max range for offset updated translations fix link for overview page fix parameter can not be set since deConz 2.11.5 fix xy is invalid: #289 #295 remove Sentry ========================================================================== Would you like to upgrade deconz from @1.3.19 to @1.3.20 now? [(y)es, (n)o]: y Update deconz from @1.3.19 to @1.3.20 NPM version: 6.14.16 Installing iobroker.deconz@1.3.20... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. Update "system.adapter.deconz.0" upload [13] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/deconz.png deconz.png image/png upload [12] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [11] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [10] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [9] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [8] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [7] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [6] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [5] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [4] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [3] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [2] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/index_m.html index_m.html text/html upload [1] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/instruction.png instruction.png image/png upload [0] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/words.js words.js application/javascript This upgrade of "alias-manager" will introduce the following changes: ========================================================================== -> 1.2.6: Updated dependencies. Fixed saving of common.custom -> 1.2.5: Added All and None Buttons to select Datapoint while autocreating alias. Some GUI-Enhancements and fixes for dark mode. ========================================================================== Would you like to upgrade alias-manager from @1.2.4 to @1.2.6 now? [(y)es, (n)o]: y Update alias-manager from @1.2.4 to @1.2.6 NPM version: 6.14.16 Installing iobroker.alias-manager@1.2.6... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. INFO: Directory "/opt/iobroker/node_modules/iobroker.alias-manager/www" was not found! Nothing was uploaded or deleted. Update "system.adapter.alias-manager.0" upload [21] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/adapter-settings.js adapter-settings.js application/javascript upload [20] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/admin.d.ts admin.d.ts video/mp2t upload [19] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/alias-manager.png alias-manager.png image/png upload [18] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/alias-manager_big.png alias-manager_big.png image/png upload [17] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/channel.pdn fancytree/react/channel.pdn null upload [16] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/channel.png fancytree/react/channel.png image/png upload [15] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/device.pdn fancytree/react/device.pdn null upload [14] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/device.png fancytree/react/device.png image/png upload [13] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/icons.gif fancytree/react/icons.gif image/gif upload [12] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/icons_original.gif fancytree/react/icons_original.gif image/gif upload [11] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/loading.gif fancytree/react/loading.gif image/gif upload [10] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/state.pdn fancytree/react/state.pdn null upload [9] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/state.png fancytree/react/state.png image/png upload [8] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/ui.fancytree.jquery.min.css fancytree/react/ui.fancytree.jquery.min.css text/css upload [7] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/ui.fancytree.min-win7.css fancytree/react/ui.fancytree.min-win7.css text/css upload [6] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/fancytree/react/ui.fancytree.min.css fancytree/react/ui.fancytree.min.css text/css upload [5] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/img/info-big.png img/info-big.png image/png upload [4] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/index_m.html index_m.html text/html upload [3] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/index_m.js index_m.js application/javascript upload [2] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/style.css style.css text/css upload [1] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/type-detector.js type-detector.js application/javascript upload [0] alias-manager.admin /opt/iobroker/node_modules/iobroker.alias-manager/admin/words.js words.js application/javascript This upgrade of "admin" will introduce the following changes: ========================================================================== -> 5.3.1: Support of IPv6 address by links (vis, material, end so on) Corrected errors in the base settings Corrected error with the pre-selected language in wizard -> 5.3.0: Enable http compression in webserver Removed deprecated package "request" Added JSONL option for base settings Added small improvements Added the file viewer for binary states ========================================================================== Would you like to upgrade admin from @5.2.3 to @5.3.1 now? [(y)es, (n)o]: y Update admin from @5.2.3 to @5.3.1 host.iobroker Adapter "system.adapter.admin.0" is stopped. NPM version: 6.14.16 Installing iobroker.admin@5.3.1... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. Update "system.adapter.admin.0" upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index.html index.html text/html upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/index_m.html index_m.html text/html upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json jsonConfig.json application/json upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/words.js words.js application/javascript host.iobroker Adapter "system.adapter.admin.0" is started This upgrade of "zigbee" will introduce the following changes: ========================================================================== -> 1.6.16: admin dep fix -> 1.6.15: Battery status was changed ========================================================================== Would you like to upgrade zigbee from @1.6.14 to @1.6.16 now? [(y)es, (n)o]: y Update zigbee from @1.6.14 to @1.6.16 NPM version: 6.14.16 Installing iobroker.zigbee@1.6.16... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. upload [311] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/adapter-settings.js adapter-settings.js application/javascript upload [300] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png upload [250] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/bitron_motion_a.png img/bitron_motion_a.png image/png upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hs1ht.png img/hs1ht.png image/png upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_air-sensor.png img/lifecontrol_air-sensor.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_ensis.png img/philips_ensis.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_argenta_2.png img/philips_hue_argenta_2.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_fuzo.png img/philips_hue_fuzo.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lwo001.png img/philips_hue_lwo001.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/q-flag_led_panel.png img/q-flag_led_panel.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/sensor_switch_aq2.png img/sensor_switch_aq2.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/smoke.png img/smoke.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_RH3052.png img/tuya_RH3052.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unavailable.png img/unavailable.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unknown.png img/unknown.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/wemo.png img/wemo.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_plug_eu.png img/xiaomi_plug_eu.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_wireless_switch.png img/xiaomi_wireless_switch.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27.png img/zbt_e27.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27_rgbw.png img/zbt_e27_rgbw.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_led_panel.png img/zbt_led_panel.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_remote.png img/zbt_remote.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_smart_switch.png img/zbt_smart_switch.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zemismart_sw2.png img/zemismart_sw2.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index.html index.html text/html upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/moment.min.js moment.min.js application/javascript upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/shuffle.min.js shuffle.min.js application/javascript upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/tab_m.html tab_m.html text/html upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.css vis-network.min.css text/css upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.js vis-network.min.js application/javascript upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/words.js words.js application/javascript upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.png zigbee.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.svg zigbee.svg image/svg+xml This upgrade of "javascript" will introduce the following changes: ========================================================================== -> 5.3.3: Added async functions: createStateAsync, deleteStateAsync -> 5.3.2: fix problem that scripts were not starting when scriptsEnabled State was triggered (or startScript was used) Make sure callbacks on startScript/stopScript work and Async variants also resolve Make sure startScriptAsync, stopScriptAsync and runScriptAsync resolve in debug mode too -> 5.3.1: Add missing callback check in setObject -> 5.3.0: Prevent some crash cases reported by Sentry (IOBROKER-JAVASCRIPT-A3) Fix Enum Updates Optimize making sure data are current for synchronous return of states/objects even for asynchronous action cases before Make sure admin files is cleaned up on update update channel/device structures for $ selector on object updates Adjustments for js-controller 4.0 ========================================================================== Would you like to upgrade javascript from @5.2.21 to @5.3.3 now? [(y)es, (n)o]: y Update javascript from @5.2.21 to @5.3.3 NPM version: 6.14.16 Installing iobroker.javascript@5.3.3... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. Update "system.adapter.javascript.0" Update "system.adapter.javascript.1" upload [103] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/adminWords.js adminWords.js application/javascript upload [100] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/LICENSE google-blockly/LICENSE null upload [90] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/delete.wav google-blockly/media/delete.wav audio/wav upload [80] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/quote1.png google-blockly/media/quote1.png image/png upload [70] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/msg/js/pt.js google-blockly/msg/js/pt.js application/javascript upload [60] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/own/blocks_time.js google-blockly/own/blocks_time.js application/javascript upload [50] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/own/msg/fr.js google-blockly/own/msg/fr.js application/javascript upload [40] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/plugins/bundle.js plugins/bundle.js application/javascript upload [30] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/static/js/runtime-main.367f9424.js static/js/runtime-main.367f9424.js application/javascript upload [20] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/configure.js vs/configure.js application/javascript upload [19] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.css vs/editor/editor.main.css text/css upload [18] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.js vs/editor/editor.main.js application/javascript upload [17] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.de.js vs/editor/editor.main.nls.de.js application/javascript upload [16] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.es.js vs/editor/editor.main.nls.es.js application/javascript upload [15] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.fr.js vs/editor/editor.main.nls.fr.js application/javascript upload [14] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.it.js vs/editor/editor.main.nls.it.js application/javascript upload [13] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.ja.js vs/editor/editor.main.nls.ja.js application/javascript upload [12] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.js vs/editor/editor.main.nls.js application/javascript upload [11] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.ko.js vs/editor/editor.main.nls.ko.js application/javascript upload [10] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.ru.js vs/editor/editor.main.nls.ru.js application/javascript upload [9] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.zh-cn.js vs/editor/editor.main.nls.zh-cn.js application/javascript upload [8] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/editor/editor.main.nls.zh-tw.js vs/editor/editor.main.nls.zh-tw.js application/javascript upload [7] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/html/htmlMode.js vs/language/html/htmlMode.js application/javascript upload [6] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/html/htmlWorker.js vs/language/html/htmlWorker.js application/javascript upload [5] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/json/jsonMode.js vs/language/json/jsonMode.js application/javascript upload [4] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/json/jsonWorker.js vs/language/json/jsonWorker.js application/javascript upload [3] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/typescript/tsMode.js vs/language/typescript/tsMode.js application/javascript upload [2] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/language/typescript/tsWorker.js vs/language/typescript/tsWorker.js application/javascript upload [1] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/loader.js vs/loader.js application/javascript upload [0] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/monaco.d.ts vs/monaco.d.ts video/mp2t This upgrade of "info" will introduce the following changes: ========================================================================== -> 1.9.19: Fix audio, USB, bluetooth and printer view ========================================================================== Would you like to upgrade info from @1.9.18 to @1.9.19 now? [(y)es, (n)o]: y Update info from @1.9.18 to @1.9.19 NPM version: 6.14.16 Installing iobroker.info@1.9.19... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. upload [90] info.admin /opt/iobroker/node_modules/iobroker.info/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [80] info.admin /opt/iobroker/node_modules/iobroker.info/admin/index_m.html index_m.html text/html upload [70] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/hourhand.png lib/img/clock/hourhand.png image/png upload [60] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/icons/memory.png lib/img/icons/memory.png image/png upload [50] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/coreos.png lib/img/logos/coreos.png image/png upload [40] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/manjaro.png lib/img/logos/manjaro.png image/png upload [30] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/slackware.png lib/img/logos/slackware.png image/png upload [20] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/bootstrap.min.js lib/js/bootstrap.min.js application/javascript upload [19] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/chartist.min.js lib/js/chartist.min.js application/javascript upload [18] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/clock.js lib/js/clock.js application/javascript upload [17] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/commons.js lib/js/commons.js application/javascript upload [16] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/documentation.js lib/js/documentation.js application/javascript upload [15] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/feednami.min.js lib/js/feednami.min.js application/javascript upload [14] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/format-google-calender.js lib/js/format-google-calender.js application/javascript upload [13] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/forum.js lib/js/forum.js application/javascript upload [12] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/githubData.js lib/js/githubData.js application/javascript upload [11] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/helper.js lib/js/helper.js application/javascript upload [10] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/hostInfo.js lib/js/hostInfo.js application/javascript upload [9] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/info.js lib/js/info.js application/javascript upload [8] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/news.js lib/js/news.js application/javascript upload [7] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/popupnews.js lib/js/popupnews.js application/javascript upload [6] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/searchGithub.js lib/js/searchGithub.js application/javascript upload [5] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/showdown.min.js lib/js/showdown.min.js application/javascript upload [4] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/simplemde.min.js lib/js/simplemde.min.js application/javascript upload [3] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/systemInformation.js lib/js/systemInformation.js application/javascript upload [2] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/updateAdapter.js lib/js/updateAdapter.js application/javascript upload [1] info.admin /opt/iobroker/node_modules/iobroker.info/admin/tab_m.html tab_m.html text/html upload [0] info.admin /opt/iobroker/node_modules/iobroker.info/admin/words.js words.js application/javascript This upgrade of "influxdb" will introduce the following changes: ========================================================================== -> 2.6.2: Correctly handle db names with hyphens for InfluxDB 1 Fix getHistory for non boolean fields Adjust shard group duration to influxdb proposals -> 2.6.1: Address issue with updating retention policy for influxDB 1 ========================================================================== Would you like to upgrade influxdb from @2.6.0 to @2.6.2 now? [(y)es, (n)o]: y Update influxdb from @2.6.0 to @2.6.2 NPM version: 6.14.16 Installing iobroker.influxdb@2.6.2... (System call) > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. upload [15] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/custom_m.html custom_m.html text/html upload [14] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [13] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [12] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [11] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [10] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [9] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [8] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [7] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [6] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [5] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [4] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/index_m.html index_m.html text/html upload [3] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/influxdb.png influxdb.png image/png upload [2] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/jsonConfig.json jsonConfig.json application/json upload [1] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/jsonCustom.json jsonCustom.json application/json upload [0] influxdb.admin /opt/iobroker/node_modules/iobroker.influxdb/admin/words.js words.js application/javascript iobroker@iobroker:/opt/iobroker$ iobroker upgrade self Update js-controller from @4.0.15 to @4.0.19 Stopped Objects DB Stopped States DB NPM version: 6.14.16 Installing iobroker.js-controller@4.0.19... (System call) > iobroker.js-controller@4.0.19 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.16 > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.js-controller@4.0.19 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first Successfully migrated 93264 objects to Redis Sets object _design/system updated { "defaultPrivate": "-----BEGIN RSA PRIVATE KEY-----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\r\nOJ5yj/RcmO5k+4r1/mCWuHwF47FA5gU83Ua3j5uo5juQf84IAq/r\r\n-----END RSA PRIVATE KEY-----\r\n", "defaultPublic": "-----BEGIN CERTIFICATE-----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\r\n065Uka7f9fOBWPpWoMtB/m4zrnD2FUVQlJqIFRgmser5gQ==\r\n-----END CERTIFICATE-----\r\n" } Update certificate defaultPrivate The object "system.certificates" was updated successfully. Update certificate defaultPublic The object "system.certificates" was updated successfully. > iobroker.xbox@0.7.7 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. iobroker@iobroker:/opt/iobroker$ iob startAdapterübersicht nach Start
-
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Vielleicht liegt es daran das ich beim installieren von Debian den IoBroker demensprechend als Hautnutzer mit angelegt habe
Siehe die Anmerkung von @crunchip , dass iobroker als Standard user name nicht die beste Wahl ist.
Maßgeblich ist zwar die uid/gid für die Besitzverhältnisse der Dateien, übersichtlicher macht es die ganze Angelegenheit jedenfalls nicht. Sollte man gerade vermeiden, wenn man nicht absolut sattelfest ist.Ist das aber in dem Fall überhaupt lösbar ohne neu aufzusetzen ?
Fürs nächste mal weiß ich es definitiv irgend etwas anderes zu nehmen als root, admin oder iobroker
Linux ist leider nach wie vor noch eine Herausforderung für mich, aber wie sagt man so schön man wächst mit seinen Aufgaben. -
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
admin
Könntest du sogar nehmen, der ist nicht vorbelastet. Ich würde den trotzdem nicht nehmen.
Ist das aber in dem Fall überhaupt lösbar ohne neu aufzusetzen ?
Kann man natürlich. Einfach einen user anlegen und den bestehenden 'iobroker' / uid=1000 korrigieren. Ist aber was für einen eigenen Thread.
Irgendwo klemmt da noch der xbox-Kram drin.
Installier den nochmal:
iobroker add xbox auto --host iobrokerAm Rande: iobroker ist auch kein guter Hostname. Führt auch zu Verwirrung, wenn da alles 'iobroker' heißt.
iobroker@iobroker iobroker TUT_DIESist total unübersichtlich, imho.
-
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
admin
Könntest du sogar nehmen, der ist nicht vorbelastet. Ich würde den trotzdem nicht nehmen.
Ist das aber in dem Fall überhaupt lösbar ohne neu aufzusetzen ?
Kann man natürlich. Einfach einen user anlegen und den bestehenden 'iobroker' / uid=1000 korrigieren. Ist aber was für einen eigenen Thread.
Irgendwo klemmt da noch der xbox-Kram drin.
Installier den nochmal:
iobroker add xbox auto --host iobrokerAm Rande: iobroker ist auch kein guter Hostname. Führt auch zu Verwirrung, wenn da alles 'iobroker' heißt.
iobroker@iobroker iobroker TUT_DIESist total unübersichtlich, imho.
Werde ich mir auf die ToDo setzen, Hostnamen kann man ja auch ändern, aufgrund der Übersicht gebe ich dir da vollkommen recht, das iobroker kommt recht häufig vor. Parallel mache ich mich trotzdem mal mit dem Gedanken vertraut evtl. eine neue VM aufzusetzen mit Standarduser und anderem Hostnamen.
Beim XBox Adapter kommt wieder das Python Thema zum tragen warum auch immer.....
iobroker@iobroker:/opt/iobroker$ iobroker add xbox auto --host iobroker NPM version: 6.14.16 Installing iobroker.xbox@0.7.8... (System call) > iobroker.js-controller@4.0.15 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.16 > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen > iobroker.js-controller@4.0.15 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first Successfully migrated 93120 objects to Redis Sets object _design/system updated { "defaultPrivate": "-----BEGIN RSA PRIVATE KEY-----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\r\nP1QwYF3+A6saFXB4Uoxvw6aGAx/1uLS8fXDaVBJH6muswZVZWHflaw==\r\n-----END RSA PRIVATE KEY-----\r\n", "defaultPublic": "-----BEGIN CERTIFICATE-----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\r\naGQ2A7pA0vCXHsxMbNJGAKLeX4XmMtjL+buE4o1EOwxRpQ==\r\n-----END CERTIFICATE-----\r\n" } Update certificate defaultPrivate The object "system.certificates" was updated successfully. Update certificate defaultPublic The object "system.certificates" was updated successfully. > iobroker.xbox@0.7.8 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. host.iobroker Cannot install iobroker.xbox@0.7.8: 1 iobroker@iobroker:/opt/iobroker$Wenn ich es oben richtig lese hat er das
upgrade selfauch wieder ignoriert und ist auf 4.0.15 geblieben -
apt policy python3 build-essential libssl-dev libffi-dev python3-dev -
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
apt policy python3 build-essential libssl-dev libffi-dev python3-dev
iobroker@iobroker:/opt/iobroker$ apt policy python3 build-essential libssl-dev libffi-dev python3-dev python3: Installiert: 3.9.2-3 Installationskandidat: 3.9.2-3 Versionstabelle: *** 3.9.2-3 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status build-essential: Installiert: 12.9 Installationskandidat: 12.9 Versionstabelle: *** 12.9 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status libssl-dev: Installiert: (keine) Installationskandidat: 1.1.1k-1+deb11u1 Versionstabelle: 1.1.1k-1+deb11u1 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages libffi-dev: Installiert: 3.3-6 Installationskandidat: 3.3-6 Versionstabelle: *** 3.3-6 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status python3-dev: Installiert: 3.9.2-3 Installationskandidat: 3.9.2-3 Versionstabelle: *** 3.9.2-3 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 100 /var/lib/dpkg/status -
Siehe Edit oben.
-
@thomas-braun hab es auch nochmal editiert
-
sudo apt update sudo apt install libssl-dev cd /opt/iobroker npm i iobroker.xbox --unsafe-perm -
iobroker@iobroker:/opt/iobroker$ sudo apt update OK:1 http://security.debian.org/debian-security bullseye-security InRelease OK:2 http://deb.debian.org/debian bullseye InRelease OK:3 http://deb.debian.org/debian bullseye-updates InRelease OK:4 http://ftp.debian.org/debian bullseye-backports InRelease OK:5 https://deb.nodesource.com/node_14.x bullseye InRelease Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. iobroker@iobroker:/opt/iobroker$ sudo apt install libssl-dev Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: ant-contrib bsdmainutils cpp-8 cracklib-runtime enchant fonts-dejavu fonts-lato fonts-linuxlibertine fonts-sil-gentium fonts-sil-gentium-basic geoip-database gir1.2-gst-plugins-base-1.0 gstreamer1.0-alsa gstreamer1.0-pulseaudio hp-ppd icoutils kate-data kde-runtime-data kde-style-qtcurve-qt5 kdelibs5-data libasan5 libbasicusageenvironment1 libbctoolbox1 libbind9-161 libboost-atomic1.67.0 libboost-chrono1.67.0 libboost-date-time1.67.0 libboost-filesystem1.67.0 libboost-iostreams1.67.0 libboost-locale1.67.0 libboost-system1.67.0 libboost-thread1.67.0 libbrlapi0.6 libbsh-java libbzrtp0 libcdio18 libcfitsio7 libcodec2-0.8.1 libcrack2 libcroco3 libcrystalhd3 libdc1394-22 libdlrestrictions1 libdns1104 libdns1110 libdouble-conversion1 libdvdread4 libebml4v5 libenchant1c2a libevent-2.1-6 libexiv2-14 libfluidsynth1 libgadu3 libgeoip1 libgit2-27 libglew2.1 libgpgme++2v5 libgps23 libgrantlee-textdocument5 libgroupsock8 libgssdp-1.0-3 libgupnp-1.0-4 libhavege1 libhttp-parser2.8 libicu63 libigdgmm5 libilmbase23 libisc1100 libisc1105 libisccc161 libisccfg163 libisl19 libjim0.77 libkaccounts1 libkdecorations2private6 libkf5emoticons-bin libkf5emoticons-data libkf5emoticons5 libkf5jsembed-data libkf5jsembed5 libkf5libkdepimakonadi5 libkf5xmlrpcclient-data libkf5xmlrpcclient5 libkwineffects11 libkwinglutils11 libkwinxrenderutils11 liblivemedia64 libllvm7 liblouis17 liblouisutdml8 liblwres161 libmatroska6v5 libmeanwhile1 libmpdec2 libmpx2 libmypaint-1.3-0 libmysofa0 libnfs12 libntrack0 libokular5core8 libopenexr23 liborcus-0.14-0 libotr5 libperl5.28 libplacebo7 libplymouth4 libpoppler82 libprotobuf-lite17 libpwquality-common libpwquality1 libpython3.7 libpython3.7-dev libpython3.7-minimal libpython3.7-stdlib libqpdf21 libqtcurve-utils2 libraw19 libre2-5 libreadline5 libreadline7 libreoffice libreoffice-avmedia-backend-gstreamer libreoffice-kde5 libreoffice-librelogo libreoffice-nlpsolver libreoffice-script-provider-bsh libreoffice-script-provider-js libreoffice-script-provider-python libreoffice-wiki-publisher libruby2.5 libruby2.7 libsane libsisu-guice-java libsisu-ioc-java libsnmp30 libtidy5deb1 libtss2-udev libturbojpeg0 libu2f-udev libusageenvironment3 libusbmuxd4 libutempter0 libvpx5 libx264-155 libx265-165 libxcb-util0 linux-image-4.19.0-16-amd64 linux-image-4.19.0-17-amd64 linux-image-5.10.0-8-amd64 ntrack-module-libnl-0 oxygen-icon-theme phonon-backend-gstreamer-common polkit-kde-1 printer-driver-hpijs python3-gst-1.0 python3-sip python3.7-minimal qml-module-qtquick-controls-styles-breeze qtcore4-l10n rake ruby ruby-did-you-mean ruby-minitest ruby-net-telnet ruby-power-assert ruby-rubygems ruby-test-unit ruby-xmlrpc ruby2.7 rubygems-integration Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Vorgeschlagene Pakete: libssl-doc Die folgenden NEUEN Pakete werden installiert: libssl-dev 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 1.810 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 8.161 kB Plattenplatz zusätzlich benutzt. Holen:1 http://deb.debian.org/debian bullseye/main amd64 libssl-dev amd64 1.1.1k-1+deb11u1 [1.810 kB] Es wurden 1.810 kB in 0 s geholt (18,0 MB/s). Vormals nicht ausgewähltes Paket libssl-dev:amd64 wird gewählt. (Lese Datenbank ... 221719 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../libssl-dev_1.1.1k-1+deb11u1_amd64.deb ... Entpacken von libssl-dev:amd64 (1.1.1k-1+deb11u1) ... libssl-dev:amd64 (1.1.1k-1+deb11u1) wird eingerichtet ... iobroker@iobroker:/opt/iobroker$ cd /opt/iobroker iobroker@iobroker:/opt/iobroker$ npm i iobroker.xbox --unsafe-perm > authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] 107 | Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); | ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1026:46: note: declared here 1026 | NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( | ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 147 | Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:150:30: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 150 | serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); | ~~~^~~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:152:69: error: no matching function for call to ‘v8::Array::Get(v8::Local<v8::String>)’ 152 | res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); | ^ In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, v8::Local<v8::Value>)’ 3717 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3717:43: note: candidate expects 2 arguments, 1 provided /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate: ‘v8::MaybeLocal<v8::Value> v8::Object::Get(v8::Local<v8::Context>, uint32_t)’ 3720 | V8_WARN_UNUSED_RESULT MaybeLocal<Value> Get(Local<Context> context, | ^~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3720:43: note: candidate expects 2 arguments, 1 provided ../authenticate_pam.cc:155:29: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 155 | remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); | ~~~^~~~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:160:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 160 | username->WriteUtf8(m->username, sizeof(m->username) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc:161:25: error: cannot convert ‘char [128]’ to ‘v8::Isolate*’ 161 | password->WriteUtf8(m->password, sizeof(m->password) - 1); | ~~~^~~~~~~~ | | | char [128] In file included from /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:67, from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/14.19.0/include/node/v8.h:3037:26: note: initializing argument 1 of ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ 3037 | int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, | ~~~~~~~~~^~~~~~~ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:6: error: variable or field ‘init’ declared void 170 | void init(Handle<Object> exports) { | ^~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~ ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token 170 | void init(Handle<Object> exports) { | ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope 170 | void init(Handle<Object> exports) { | ^~~~~~~ In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope; did you mean ‘int’? 175 | NODE_MODULE(authenticate_pam, init); | ^~~~ /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:793:36: note: in definition of macro ‘NODE_MODULE_X’ 793 | (node::addon_register_func) (regfunc), \ | ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ 175 | NODE_MODULE(authenticate_pam, init); | ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:111: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:400:28) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12) gyp ERR! System Linux 5.10.0-11-amd64 gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v14.19.0 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok > iobroker.xbox@0.7.8 install /opt/iobroker/node_modules/iobroker.xbox > npip install No python_modules directory; installing pip locally if needed. Traceback (most recent call last): File "/opt/iobroker/node_modules/nopy/src/get-pip.py", line 20061, in <module> main() File "/opt/iobroker/node_modules/nopy/src/get-pip.py", line 194, in main bootstrap(tmpdir=tmpdir) File "/opt/iobroker/node_modules/nopy/src/get-pip.py", line 82, in bootstrap import pip File "/tmp/tmp2bd262ko/pip.zip/pip/__init__.py", line 26, in <module> File "/tmp/tmp2bd262ko/pip.zip/pip/utils/__init__.py", line 23, in <module> File "/tmp/tmp2bd262ko/pip.zip/pip/locations.py", line 9, in <module> ImportError: cannot import name 'sysconfig' from 'distutils' (/usr/lib/python3.7/distutils/__init__.py) Error: Exited with code 1. at ChildProcess.<anonymous> (/opt/iobroker/node_modules/nopy/src/api.js:277:20) at ChildProcess.emit (events.js:400:28) at maybeClose (internal/child_process.js:1058:16) at Process.ChildProcess._handle.onexit (internal/child_process.js:293:5) npm WARN @material-ui/pickers@3.3.10 requires a peer of @material-ui/core@^4.0.0 but none is installed. You must install peer dependencies yourself. npm WARN @material-ui/pickers@3.3.10 requires a peer of react@^16.8.0 || ^17.0.0 but none is installed. You must install peer dependencies yourself. npm WARN @material-ui/pickers@3.3.10 requires a peer of react-dom@^16.8.0 || ^17.0.0 but none is installed. You must install peer dependencies yourself. npm WARN react-transition-group@4.4.2 requires a peer of react@>=16.6.0 but none is installed. You must install peer dependencies yourself. npm WARN react-transition-group@4.4.2 requires a peer of react-dom@>=16.6.0 but none is installed. You must install peer dependencies yourself. npm WARN rifm@0.7.0 requires a peer of react@>=16.8 but none is installed. You must install peer dependencies yourself. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 (node_modules/authenticate-pam): npm WARN optional SKIPPING OPTIONAL DEPENDENCY: authenticate-pam@1.0.2 install: `node-gyp rebuild` npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1 npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.xbox@0.7.8 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.xbox@0.7.8 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-03-07T22_03_58_598Z-debug.log -
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
Ach du je....
sudo apt autoremove sudo rebootUnd ein Server wird ohne Desktop betrieben!
cd /opt/iobroker npm ls authenticate-pam -
@thomas-braun said in Adapter Update-Schleife bzw. wird nicht aktualisiert:
Und ein Server wird ohne Desktop betrieben!
ich weiß
wie oben beschrieben aus Fehlern lernt maniobroker@iobroker:/opt/iobroker$ sudo apt autoremove Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden Pakete werden ENTFERNT: ant-contrib bsdmainutils cpp-8 cracklib-runtime enchant fonts-dejavu fonts-lato fonts-linuxlibertine fonts-sil-gentium fonts-sil-gentium-basic geoip-database gir1.2-gst-plugins-base-1.0 gstreamer1.0-alsa gstreamer1.0-pulseaudio hp-ppd icoutils kate-data kde-runtime-data kde-style-qtcurve-qt5 kdelibs5-data libasan5 libbasicusageenvironment1 libbctoolbox1 libbind9-161 libboost-atomic1.67.0 libboost-chrono1.67.0 libboost-date-time1.67.0 libboost-filesystem1.67.0 libboost-iostreams1.67.0 libboost-locale1.67.0 libboost-system1.67.0 libboost-thread1.67.0 libbrlapi0.6 libbsh-java libbzrtp0 libcdio18 libcfitsio7 libcodec2-0.8.1 libcrack2 libcroco3 libcrystalhd3 libdc1394-22 libdlrestrictions1 libdns1104 libdns1110 libdouble-conversion1 libdvdread4 libebml4v5 libenchant1c2a libevent-2.1-6 libexiv2-14 libfluidsynth1 libgadu3 libgeoip1 libgit2-27 libglew2.1 libgpgme++2v5 libgps23 libgrantlee-textdocument5 libgroupsock8 libgssdp-1.0-3 libgupnp-1.0-4 libhavege1 libhttp-parser2.8 libicu63 libigdgmm5 libilmbase23 libisc1100 libisc1105 libisccc161 libisccfg163 libisl19 libjim0.77 libkaccounts1 libkdecorations2private6 libkf5emoticons-bin libkf5emoticons-data libkf5emoticons5 libkf5jsembed-data libkf5jsembed5 libkf5libkdepimakonadi5 libkf5xmlrpcclient-data libkf5xmlrpcclient5 libkwineffects11 libkwinglutils11 libkwinxrenderutils11 liblivemedia64 libllvm7 liblouis17 liblouisutdml8 liblwres161 libmatroska6v5 libmeanwhile1 libmpdec2 libmpx2 libmypaint-1.3-0 libmysofa0 libnfs12 libntrack0 libokular5core8 libopenexr23 liborcus-0.14-0 libotr5 libperl5.28 libplacebo7 libplymouth4 libpoppler82 libprotobuf-lite17 libpwquality-common libpwquality1 libpython3.7 libpython3.7-dev libpython3.7-minimal libpython3.7-stdlib libqpdf21 libqtcurve-utils2 libraw19 libre2-5 libreadline5 libreadline7 libreoffice libreoffice-avmedia-backend-gstreamer libreoffice-kde5 libreoffice-librelogo libreoffice-nlpsolver libreoffice-script-provider-bsh libreoffice-script-provider-js libreoffice-script-provider-python libreoffice-wiki-publisher libruby2.5 libruby2.7 libsane libsisu-guice-java libsisu-ioc-java libsnmp30 libtidy5deb1 libtss2-udev libturbojpeg0 libu2f-udev libusageenvironment3 libusbmuxd4 libutempter0 libvpx5 libx264-155 libx265-165 libxcb-util0 linux-image-4.19.0-16-amd64 linux-image-4.19.0-17-amd64 linux-image-5.10.0-8-amd64 ntrack-module-libnl-0 oxygen-icon-theme phonon-backend-gstreamer-common polkit-kde-1 printer-driver-hpijs python3-gst-1.0 python3-sip python3.7-minimal qml-module-qtquick-controls-styles-breeze qtcore4-l10n rake ruby ruby-did-you-mean ruby-minitest ruby-net-telnet ruby-power-assert ruby-rubygems ruby-test-unit ruby-xmlrpc ruby2.7 rubygems-integration 0 aktualisiert, 0 neu installiert, 170 zu entfernen und 0 nicht aktualisiert. Nach dieser Operation werden 1.359 MB Plattenplatz freigegeben. Möchten Sie fortfahren? [J/n] y (Lese Datenbank ... 221836 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von ant-contrib (1.0~b3+svn177-12) ... Entfernen von bsdmainutils (12.1.7+nmu3) ... Entfernen von cpp-8 (8.3.0-6) ... Entfernen von cracklib-runtime (2.9.6-3.4) ... Entfernen von enchant (1.6.0-11.1+b1) ... Entfernen von fonts-dejavu (2.37-2) ... Entfernen von fonts-lato (2.0-2.1) ... dpkg: Warnung: Während Entfernens von fonts-lato ist Verzeichnis »/usr/share/fonts/truetype/lato« nicht leer, wird daher nicht gelöscht Entfernen von fonts-linuxlibertine (5.3.0-6) ... Entfernen von fonts-sil-gentium (20081126:1.03-4) ... dpkg: Warnung: Während Entfernens von fonts-sil-gentium ist Verzeichnis »/usr/share/fonts/truetype/gentium« nicht leer, wird daher nicht gelöscht Entfernen von fonts-sil-gentium-basic (1.102-1.1) ... dpkg: Warnung: Während Entfernens von fonts-sil-gentium-basic ist Verzeichnis »/usr/share/fonts/truetype/gentium-basic« nicht leer, wird daher nicht gelöscht Entfernen von geoip-database (20191224-3) ... Entfernen von python3-gst-1.0 (1.18.3-1) ... Entfernen von gir1.2-gst-plugins-base-1.0:amd64 (1.18.4-2) ... Entfernen von gstreamer1.0-alsa:amd64 (1.18.4-2) ... Entfernen von gstreamer1.0-pulseaudio:amd64 (1.18.4-2) ... Entfernen von hp-ppd (0.9+nmu1) ... Entfernen von icoutils (0.32.3-3) ... Entfernen von kate-data (4:4.14.3-5) ... Entfernen von kde-runtime-data (4:17.08.3-2.1) ... Entfernen von kde-style-qtcurve-qt5:amd64 (1.9-7+b2) ... Entfernen von kdelibs5-data (4:4.14.38-3) ... Entfernen von libasan5:amd64 (9.3.0-22) ... Entfernen von liblivemedia64:amd64 (2018.11.26-1.1) ... Entfernen von libgroupsock8:amd64 (2018.11.26-1.1) ... Entfernen von libbasicusageenvironment1:amd64 (2018.11.26-1.1) ... Entfernen von libbzrtp0:amd64 (4.4.13-2) ... Entfernen von libbctoolbox1:amd64 (4.4.13-2) ... Entfernen von libbind9-161:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libboost-locale1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-thread1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-atomic1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-chrono1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-date-time1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von liborcus-0.14-0:amd64 (0.14.1-6) ... Entfernen von libboost-filesystem1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-iostreams1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libboost-system1.67.0:amd64 (1.67.0-13+deb10u1) ... Entfernen von libbrlapi0.6:amd64 (5.6-10+deb10u1) ... Entfernen von libreoffice-script-provider-bsh (1:7.0.4-4+deb11u1) ... Entfernen von libbsh-java (2.0b4-20) ... Entfernen von libcdio18:amd64 (2.0.0-2) ... Entfernen von libcfitsio7:amd64 (3.450-3) ... Entfernen von libcodec2-0.8.1:amd64 (0.8.1-2) ... Entfernen von libpwquality1:amd64 (1.4.4-1) ... Entfernen von libcrack2:amd64 (2.9.6-3.4) ... Entfernen von libcroco3:amd64 (0.6.12-3) ... Entfernen von libcrystalhd3:amd64 (1:0.0~git20110715.fdd2f19-13) ... Entfernen von libdc1394-22:amd64 (2.2.5-1) ... Entfernen von libdlrestrictions1 (0.15.32) ... Entfernen von libdns1104:amd64 (1:9.11.5.P4+dfsg-5.1+deb10u5) ... Entfernen von libisccfg163:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libdns1110:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libdouble-conversion1:amd64 (3.1.0-3) ... Entfernen von libdvdread4:amd64 (6.0.1-1) ... Entfernen von libmatroska6v5:amd64 (1.4.9-1+deb10u1) ... Entfernen von libebml4v5:amd64 (1.3.6-2) ... Entfernen von libenchant1c2a:amd64 (1.6.0-11.1+b1) ... Entfernen von libevent-2.1-6:amd64 (2.1.8-stable-4) ... Entfernen von libexiv2-14:amd64 (0.25-4+deb10u2) ... Entfernen von libfluidsynth1:amd64 (1.1.11-1+deb10u1) ... Entfernen von libgadu3 (1:1.12.2-5) ... Entfernen von libisc1100:amd64 (1:9.11.5.P4+dfsg-5.1+deb10u5) ... Entfernen von libgeoip1:amd64 (1.6.12-7) ... Entfernen von libgit2-27:amd64 (0.27.7+dfsg.1-0.2) ... Entfernen von libglew2.1:amd64 (2.1.0-4+b1) ... Entfernen von libgpgme++2v5 (4:4.14.10-11) ... Entfernen von libgps23:amd64 (3.17-7) ... Entfernen von libgrantlee-textdocument5:amd64 (5.2.0-3) ... Entfernen von libgupnp-1.0-4:amd64 (1.0.5-0+deb10u1) ... Entfernen von libgssdp-1.0-3:amd64 (1.0.5-0+deb10u1) ... Entfernen von libhavege1:amd64 (1.9.1-7) ... Entfernen von libhttp-parser2.8:amd64 (2.8.1-1) ... Entfernen von libicu63:amd64 (63.1-6+deb10u1) ... Entfernen von libigdgmm5:amd64 (18.4.1+ds1-1) ... Entfernen von libopenexr23:amd64 (2.2.1-4.1+deb10u1) ... Entfernen von libilmbase23:amd64 (2.2.1-2) ... Entfernen von libisccc161:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libisc1105:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libisl19:amd64 (0.20-2) ... Entfernen von libjim0.77:amd64 (0.77+dfsg0-3) ... Entfernen von libkaccounts1:amd64 (4:17.08.3-1) ... Entfernen von libkdecorations2private6 (4:5.14.5-1) ... Entfernen von libkf5emoticons-bin (5.78.0-2) ... Entfernen von libkf5emoticons5:amd64 (5.78.0-2) ... Entfernen von libkf5emoticons-data (5.78.0-2) ... Entfernen von libkf5jsembed5:amd64 (5.78.0-2) ... Entfernen von libkf5jsembed-data (5.78.0-2) ... Entfernen von libkf5libkdepimakonadi5:amd64 (4:18.08.3-2) ... Entfernen von libkf5xmlrpcclient5:amd64 (5.78.0-2) ... Entfernen von libkf5xmlrpcclient-data (5.78.0-2) ... Entfernen von libkwineffects11 (4:5.14.5-1) ... Entfernen von libkwinglutils11 (4:5.14.5-1) ... Entfernen von libkwinxrenderutils11 (4:5.14.5-1) ... Entfernen von libllvm7:amd64 (1:7.0.1-8+deb10u2) ... Entfernen von liblouisutdml8:amd64 (2.7.0-5+b1) ... Entfernen von liblouis17:amd64 (3.8.0-2) ... Entfernen von liblwres161:amd64 (1:9.11.19+dfsg-2.1) ... Entfernen von libmeanwhile1:amd64 (1.1.1-2) ... Entfernen von libpython3.7-dev:amd64 (3.7.3-2+deb10u3) ... Entfernen von libpython3.7:amd64 (3.7.3-2+deb10u3) ... Entfernen von libpython3.7-stdlib:amd64 (3.7.3-2+deb10u3) ... Entfernen von libmpdec2:amd64 (2.4.2-2) ... Entfernen von libmpx2:amd64 (8.3.0-6) ... Entfernen von libmypaint-1.3-0:amd64 (1.3.0-2.1) ... Entfernen von libmysofa0:amd64 (0.6~dfsg0-3+deb10u1) ... Entfernen von libnfs12:amd64 (3.0.0-2) ... Entfernen von libokular5core8 (4:17.12.2-2.2+deb10u1) ... Entfernen von libotr5:amd64 (4.1.1-4) ... Entfernen von libsnmp30:amd64 (5.7.3+dfsg-5+deb10u2) ... Entfernen von libperl5.28:amd64 (5.28.1-6+deb10u1) ... Entfernen von libplacebo7:amd64 (1.7.0-2) ... Entfernen von libplymouth4:amd64 (0.9.4-1.1) ... Entfernen von libpoppler82:amd64 (0.71.0-5) ... Entfernen von libprotobuf-lite17:amd64 (3.6.1.3-2) ... Entfernen von libpwquality-common (1.4.4-1) ... Entfernen von python3.7-minimal (3.7.3-2+deb10u3) ... Unlinking and removing bytecode for runtime python3.7 Entfernen von libpython3.7-minimal:amd64 (3.7.3-2+deb10u3) ... Entfernen von libqpdf21:amd64 (8.4.0-2) ... Entfernen von libqtcurve-utils2:amd64 (1.9-7+b2) ... Entfernen von libraw19:amd64 (0.19.2-2) ... Entfernen von libre2-5:amd64 (20190101+dfsg-2) ... Entfernen von libreadline5:amd64 (5.2+dfsg-3+b13) ... Entfernen von libruby2.5:amd64 (2.5.5-3+deb10u3) ... Entfernen von libreadline7:amd64 (7.0-5) ... Entfernen von libreoffice (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-avmedia-backend-gstreamer (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-kde5 (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-librelogo (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-nlpsolver (0.9+LibO7.0.4-4+deb11u1) ... Entfernen von libreoffice-script-provider-js (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-script-provider-python (1:7.0.4-4+deb11u1) ... Entfernen von libreoffice-wiki-publisher (1.2.0+LibO7.0.4-4+deb11u1) ... Entfernen von libsane:amd64 (1.0.31-4.1) ... Entfernen von libsisu-ioc-java (2.3.0-11) ... Entfernen von libsisu-guice-java (4.2.0-1) ... Entfernen von libtidy5deb1:amd64 (2:5.6.0-11) ... Entfernen von libtss2-udev (2.1.0-4) ... Entfernen von libturbojpeg0:amd64 (1:2.0.6-4) ... Entfernen von libu2f-udev (1.1.10-3) ... Entfernen von libusageenvironment3:amd64 (2018.11.26-1.1) ... Entfernen von libusbmuxd4:amd64 (1.1.0~git20181007.07a493a-1) ... Entfernen von libutempter0:amd64 (1.2.1-2) ... Entfernen von libvpx5:amd64 (1.7.0-3+deb10u1) ... Entfernen von libx264-155:amd64 (2:0.155.2917+git0a84d98-2) ... Entfernen von libx265-165:amd64 (2.9-4) ... Entfernen von libxcb-util0:amd64 (0.3.8-3+b2) ... Entfernen von linux-image-4.19.0-16-amd64 (4.19.181-1) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-4.19.0-16-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-11-amd64 Found initrd image: /boot/initrd.img-5.10.0-11-amd64 Found linux image: /boot/vmlinuz-5.10.0-9-amd64 Found initrd image: /boot/initrd.img-5.10.0-9-amd64 Found linux image: /boot/vmlinuz-5.10.0-8-amd64 Found initrd image: /boot/initrd.img-5.10.0-8-amd64 Found linux image: /boot/vmlinuz-4.19.0-17-amd64 Found initrd image: /boot/initrd.img-4.19.0-17-amd64 done Entfernen von linux-image-4.19.0-17-amd64 (4.19.194-3) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-4.19.0-17-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-11-amd64 Found initrd image: /boot/initrd.img-5.10.0-11-amd64 Found linux image: /boot/vmlinuz-5.10.0-9-amd64 Found initrd image: /boot/initrd.img-5.10.0-9-amd64 Found linux image: /boot/vmlinuz-5.10.0-8-amd64 Found initrd image: /boot/initrd.img-5.10.0-8-amd64 done Entfernen von linux-image-5.10.0-8-amd64 (5.10.46-5) ... /etc/kernel/postrm.d/initramfs-tools: update-initramfs: Deleting /boot/initrd.img-5.10.0-8-amd64 /etc/kernel/postrm.d/zz-update-grub: Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-5.10.0-11-amd64 Found initrd image: /boot/initrd.img-5.10.0-11-amd64 Found linux image: /boot/vmlinuz-5.10.0-9-amd64 Found initrd image: /boot/initrd.img-5.10.0-9-amd64 done Entfernen von oxygen-icon-theme (5:5.78.0-2) ... Entfernen von phonon-backend-gstreamer-common:amd64 (4:4.10.0-1) ... Entfernen von polkit-kde-1 (4:5.14.5-1) ... Entfernen von printer-driver-hpijs (3.21.2+dfsg1-2) ... Entfernen von python3-sip (4.19.25+dfsg-1) ... Entfernen von qml-module-qtquick-controls-styles-breeze (4:5.14.5-1) ... Entfernen von qtcore4-l10n (4:4.8.7+dfsg-18+deb10u1) ... Entfernen von ruby-did-you-mean (1.2.1-1) ... Entfernen von ntrack-module-libnl-0 (016-1.4) ... Entfernen von ruby2.7 (2.7.4-1+deb11u1) ... Entfernen von libruby2.7:amd64 (2.7.4-1+deb11u1) ... Entfernen von rake (13.0.3-1) ... Entfernen von ruby (1:2.7+2) ... Entfernen von ruby-rubygems (3.2.5-2) ... Entfernen von ruby-minitest (5.13.0-1) ... Entfernen von ruby-net-telnet (0.1.1-2) ... Entfernen von ruby-test-unit (3.3.9-1) ... Entfernen von ruby-power-assert (1.1.7-2) ... Entfernen von ruby-xmlrpc (0.3.0-2) ... Entfernen von rubygems-integration (1.18) ... Entfernen von libntrack0 (016-1.4) ... Trigger für hicolor-icon-theme (0.17-2) werden verarbeitet ... Trigger für cups (2.3.3op2-3+deb11u1) werden verarbeitet ... Trigger für libc-bin (2.31-13+deb11u2) werden verarbeitet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für libreoffice-common (1:7.0.4-4+deb11u1) werden verarbeitet ... Trigger für dbus (1.12.20-2) werden verarbeitet ... Trigger für shared-mime-info (2.0-1) werden verarbeitet ... Trigger für mailcap (3.69) werden verarbeitet ... Trigger für fontconfig (2.13.1-4.2) werden verarbeitet ... iobroker@iobroker:/opt/iobroker$ sudo reboot iobroker@iobroker:~$ cd /opt/iobroker iobroker@iobroker:/opt/iobroker$ npm ls authenticate-pam iobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.terminal@0.1.2 └── UNMET OPTIONAL DEPENDENCY authenticate-pam@1.0.2 iobroker@iobroker:/opt/iobroker$iobroker@iobroker:/opt/iobroker$ npm ls authenticate_pam iobroker.inst@3.0.0 /opt/iobroker └── (empty) -
@blade1987 sagte in Adapter Update-Schleife bzw. wird nicht aktualisiert:
iobroker.terminal
Der schleppt den authenticate-pam Kram an.
cd /opt/iobroker npm uninstall iobroker.terminal
