UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[simatec]

@sigi234 Kannst du bitte den gesamten debuglog vom request posten?

[simatec]

@negalein sagte in Test Adapter pegelalarm 1.2.x:

läuft

Dein Problem sollte damit behoben sein.

[sigi234]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

@sigi234 Kannst du bitte den gesamten debuglog vom request posten?

2021-09-02 13:35:23.428 - info: pegelalarm.0 (17492) undefined is not a valid state value for id "pegelalarm.0.stations.kniewas.geo.altitude"
2021-09-02 13:35:23.444 - debug: pegelalarm.0 (17492) Pegelalarm request done
2021-09-02 13:35:23.445 - debug: pegelalarm.0 (17492) Pegelalarm request for measuring station 3 is finish ...
2021-09-02 13:35:24.460 - debug: pegelalarm.0 (17492) Pegelalarm request for measuring station 4 is started ...
2021-09-02 13:35:24.460 - debug: pegelalarm.0 (17492) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Traun
2021-09-02 13:35:24.571 - debug: pegelalarm.0 (17492) Pegelalarm API is available ... Status: 200
2021-09-02 13:35:28.768 - info: pegelalarm.0 (17492) undefined is not a valid state value for id "pegelalarm.0.stations.ebensee.geo.altitude"
2021-09-02 13:35:32.882 - info: pegelalarm.0 (17492) undefined is not a valid state value for id "pegelalarm.0.stations.obertraun.geo.altitude"
2021-09-02 13:35:36.980 - info: pegelalarm.0 (17492) undefined is not a valid state value for id "pegelalarm.0.stations.steeg_seeausfluss.geo.altitude"
2021-09-02 13:35:41.109 - debug: pegelalarm.0 (17492) Pegelalarm request done
2021-09-02 13:35:41.109 - debug: pegelalarm.0 (17492) Pegelalarm request for measuring station 4 is finish ...
2021-09-02 13:35:42.115 - debug: pegelalarm.0 (17492) Pegelalarm request for measuring station 5 is started ...
2021-09-02 13:35:42.116 - debug: pegelalarm.0 (17492) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Krems&qStationName=Kematen%20An%20Der%20Krems
2021-09-02 13:35:42.226 - debug: pegelalarm.0 (17492) Pegelalarm API is available ... Status: 200
2021-09-02 13:35:42.350 - debug: pegelalarm.0 (17492) Pegelalarm request done
2021-09-02 13:35:42.350 - debug: pegelalarm.0 (17492) Pegelalarm request for measuring station 5 is finish ...
2021-09-02 13:35:42.350 - debug: pegelalarm.0 (17492) Pegelalarm Request is completed
2021-09-02 13:35:47.360 - debug: pegelalarm.0 (17492) Check for deleting old states is started
2021-09-02 13:35:52.594 - debug: pegelalarm.0 (17492) cleaned everything up...
2021-09-02 13:35:52.600 - debug: pegelalarm.0 (17492) Plugin sentry destroyed
2021-09-02 13:35:52.600 - info: pegelalarm.0 (17492) Terminated (NO_ERROR): Without reason
2021-09-02 13:35:53.236 - info: host.Medion(Home) instance system.adapter.pegelalarm.0 terminated with code 0 (NO_ERROR)
2021-09-02 13:36:00.028 - info: host.Medion(Home) instance system.adapter.pegelalarm.0 started with pid 900
2021-09-02 13:36:00.644 - debug: pegelalarm.0 (900) Redis Objects: Use Redis connection: 127.0.0.1:9011
2021-09-02 13:36:00.693 - debug: pegelalarm.0 (900) Objects client ready ... initialize now
2021-09-02 13:36:00.697 - debug: pegelalarm.0 (900) Objects create System PubSub Client
2021-09-02 13:36:00.698 - debug: pegelalarm.0 (900) Objects create User PubSub Client
2021-09-02 13:36:00.698 - debug: pegelalarm.0 (900) Objects client initialize lua scripts
2021-09-02 13:36:00.713 - debug: pegelalarm.0 (900) Objects connected to redis: 127.0.0.1:9011
2021-09-02 13:36:00.717 - debug: pegelalarm.0 (900) objectDB connected
2021-09-02 13:36:00.718 - debug: pegelalarm.0 (900) Redis States: Use Redis connection: 127.0.0.1:9010
2021-09-02 13:36:00.723 - debug: pegelalarm.0 (900) States create System PubSub Client
2021-09-02 13:36:00.724 - debug: pegelalarm.0 (900) States create User PubSub Client
2021-09-02 13:36:00.731 - debug: pegelalarm.0 (900) States connected to redis: 127.0.0.1:9010
2021-09-02 13:36:00.731 - debug: pegelalarm.0 (900) statesDB connected
2021-09-02 13:36:01.008 - debug: pegelalarm.0 (900) Plugin sentry Initialize Plugin (enabled=true)
2021-09-02 13:36:01.309 - info: pegelalarm.0 (900) starting. Version 1.2.1 in C:/Program Files/iobroker/Home/node_modules/iobroker.pegelalarm, node: v12.22.6, js-controller: 3.3.15
2021-09-02 13:36:01.315 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 1 is started ...
2021-09-02 13:36:01.316 - debug: pegelalarm.0 (900) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Krems
2021-09-02 13:36:01.492 - debug: pegelalarm.0 (900) Pegelalarm API is available ... Status: 200
2021-09-02 13:36:07.726 - debug: pegelalarm.0 (900) Pegelalarm request done
2021-09-02 13:36:07.726 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 1 is finish ...
2021-09-02 13:36:08.739 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 2 is started ...
2021-09-02 13:36:08.740 - debug: pegelalarm.0 (900) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Donau
2021-09-02 13:36:08.847 - debug: pegelalarm.0 (900) Pegelalarm API is available ... Status: 200
2021-09-02 13:36:21.226 - debug: pegelalarm.0 (900) Pegelalarm request done
2021-09-02 13:36:21.226 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 2 is finish ...
2021-09-02 13:36:22.227 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 3 is started ...
2021-09-02 13:36:22.228 - debug: pegelalarm.0 (900) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Steyr
2021-09-02 13:36:22.335 - debug: pegelalarm.0 (900) Pegelalarm API is available ... Status: 200
2021-09-02 13:36:24.512 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.obergrünburg.geo.altitude"
2021-09-02 13:36:28.629 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.steyrling.geo.altitude"
2021-09-02 13:36:32.702 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.kniewas.geo.altitude"
2021-09-02 13:36:32.721 - debug: pegelalarm.0 (900) Pegelalarm request done
2021-09-02 13:36:32.721 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 3 is finish ...
2021-09-02 13:36:33.736 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 4 is started ...
2021-09-02 13:36:33.736 - debug: pegelalarm.0 (900) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Traun
2021-09-02 13:36:33.848 - debug: pegelalarm.0 (900) Pegelalarm API is available ... Status: 200
2021-09-02 13:36:38.035 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.ebensee.geo.altitude"
2021-09-02 13:36:42.154 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.obertraun.geo.altitude"
2021-09-02 13:36:46.228 - info: pegelalarm.0 (900) undefined is not a valid state value for id "pegelalarm.0.stations.steeg_seeausfluss.geo.altitude"
2021-09-02 13:36:50.392 - debug: pegelalarm.0 (900) Pegelalarm request done
2021-09-02 13:36:50.392 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 4 is finish ...
2021-09-02 13:36:51.403 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 5 is started ...
2021-09-02 13:36:51.404 - debug: pegelalarm.0 (900) https://api.pegelalarm.at/api/station/1.0/list?countryCode=AT&qRegion=Ober%C3%B6sterreich&qWater=Krems&qStationName=Kematen%20An%20Der%20Krems
2021-09-02 13:36:51.512 - debug: pegelalarm.0 (900) Pegelalarm API is available ... Status: 200
2021-09-02 13:36:51.653 - debug: pegelalarm.0 (900) Pegelalarm request done
2021-09-02 13:36:51.653 - debug: pegelalarm.0 (900) Pegelalarm request for measuring station 5 is finish ...
2021-09-02 13:36:51.654 - debug: pegelalarm.0 (900) Pegelalarm Request is completed
2021-09-02 13:36:56.663 - debug: pegelalarm.0 (900) Check for deleting old states is started
2021-09-02 13:37:01.843 - debug: pegelalarm.0 (900) cleaned everything up...
2021-09-02 13:37:01.852 - debug: pegelalarm.0 (900) Plugin sentry destroyed
2021-09-02 13:37:01.854 - info: pegelalarm.0 (900) Terminated (NO_ERROR): Without reason
2021-09-02 13:37:02.378 - info: host.Medion(Home) instance system.adapter.pegelalarm.0 terminated with code 0 (NO_ERROR)

[simatec]

@sigi234 sagte in Test Adapter pegelalarm 1.2.x:

altitude

OK, da scheinen keine Daten vorzuliegen ... Werde das in der nächsten Version abfangen

[simatec]

Ab sofort steht die Version 1.2.2 auf Github und in Kürze auch im latest zur Verfügung.

Changelog

1.2.2 (2021-09-02)

• (simatec) Bugfix States

[Negalein]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

1.2.2 (2021-09-02)

jetzt kommt

pegelalarm.0
2021-09-02 15:28:26.386	info	State value to set for "pegelalarm.0.stations.pramerdorf.state.unknown" has to be type "boolean" but received type "string"
pegelalarm.0
2021-09-02 15:28:22.518	info	State value to set for "pegelalarm.0.stations.schrding.state.unknown" has to be type "boolean" but received type "string"
pegelalarm.1
2021-09-02 15:28:29.881	info	State value to set for "pegelalarm.1.stations.schrding-neuhaus_kw.state.unknown" has to be type "boolean" but received type "string"
pegelalarm.1
2021-09-02 15:28:26.385	info	State value to set for "pegelalarm.1.stations.passau_marienbrücke.state.unknown" has to be type "boolean" but received type "string"
pegelalarm.1
2021-09-02 15:28:22.531	info	State value to set for "pegelalarm.1.stations.passau_ingling.state.unknown" has to be type "boolean" but received type "string"

[simatec]

@negalein sagte in Test Adapter pegelalarm 1.2.x:

unknown

Mist übersehen ... Warte ich pushe nochmal eine Version

[simatec]

Ab sofort steht die Version 1.2.3 auf Github und in Kürze auch im latest zur Verfügung.

Changelog

1.2.3 (2021-09-02)

• (simatec) Bugfix States

[Negalein]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

Version 1.2.3

Merci
läuft sehr gut.

[simatec]

@negalein

[oranggila]

@simatec said in Test Adapter pegelalarm 1.2.x:

Ab sofort steht die Version 1.2.3 auf Github und in Kürze auch im latest zur Verfügung.

Changelog

1.2.3 (2021-09-02)

• (simatec) Bugfix States

Ist gefixt. Super, vielen Dank!
Sorry, dass ich nicht geantwortet hatte, grad zurück aus Urlaub.

[Negalein]

@simatec

mit 1.2.4 tritt wieder das Problem auf, dass er plötzlich die Daten nicht mehr abholt.

Im Debug steht auch nur das

host.ioBroker 2021-12-01 12:55:39.437	error	instance system.adapter.pegelalarm.1 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
pegelalarm.1 2021-12-01 12:55:38.856	error	pegelalarm.1 already running
host.ioBroker 2021-12-01 12:55:30.781	error	instance system.adapter.pegelalarm.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
pegelalarm.0 2021-12-01 12:55:30.208	error	pegelalarm.0 already running

[simatec]

@negalein Sehr komisch ... gab nur Update der Deps.
Ich schaue die Tage nochmal, wo er genau den Adapter nicht beendet. mein Testsystem läuft und läuft und läuft ...

[Negalein]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

Ich schaue die Tage nochmal, wo er genau den Adapter nicht beendet. mein Testsystem läuft und läuft und läuft ...

ich lass den Debug jetzt mal dauernd an. Vielleicht findet sich dann was.

[simatec]

@negalein thx

[Negalein]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

thx

Servus

Es war gestern wieder soweit

Log.txt

[simatec]

@negalein Super das hilft mir weiter

[simatec]

Ab sofort steht auf Github und in kürze auch im latest die Version 1.2.5 zur Verfügung.

Changelog

1.2.5 (2021-12-08)

• (simatec) Bugfix Adapter stop after request error
• (simatec) Dependencies updated
• (simatec) test and release updated

[Negalein]

@simatec sagte in Test Adapter pegelalarm 1.2.x:

Super das hilft mir weiter

Servus

Am 25. 5. um ca. 14:xx Uhr war es mit Schaerding wieder soweit.

log.txt

[simatec]

@negalein Danke dir für den Log ... Er hat mir ein wenig geholfen ...

Hoffe ich konnte damit den Fehler ausfindig machen.

Kannst du nochmal von Github testen?
https://github.com/simatec/ioBroker.pegelalarm.git