NEWS
ZigBee neue Version 1.5.x
-
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6Nach reboot mit deaktiviertem Zigbee und dann nachdem alles hochgelaufen ist zigbee aktiviert:
zigbee.0 2021-06-09 19:41:24.425 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.423 error (1903) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:41:24.421 error (1903) Failed to start Zigbee zigbee.0 2021-06-09 19:41:24.264 info (1903) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:41:24.258 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.053 info (1903) Starting Zigbee npm ... zigbee.0 2021-06-09 19:41:23.960 info (1903) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:41:21.617 info instance system.adapter.zigbee.0 started with pid 1903 host.raspi-iobroker 2021-06-09 19:40:51.545 info Restart adapter system.adapter.zigbee.0 because enabled host.raspi-iobroker 2021-06-09 19:40:51.544 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-09 19:40:50.950 warn (1827) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:40:50.939 error (1827) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.938 error (1827) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:40:50.931 error (1827) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.928 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:50.926 warn (1827) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:40:50.924 info (1827) terminating zigbee.0 2021-06-09 19:40:50.922 error (1827) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:40:50.918 info (1827) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:40:50.912 info (1827) cleaned everything up... zigbee.0 2021-06-09 19:40:50.901 error (1827) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:40:50.900 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:50.899 error (1827) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:40:50.897 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:30.083 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:30.078 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:30.077 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:29.922 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:29.893 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:29.892 info (1827) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:40:19.893 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.891 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:19.890 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:19.728 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:19.724 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.492 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:19.377 info (1827) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:40:16.846 info instance system.adapter.zigbee.0 started with pid 1827 host.raspi-iobroker 2021-06-09 19:40:16.799 info "system.adapter.zigbee.0" enabled@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
-
@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
@asgothian
Habe einen neuen link 'serial1'pi@raspi-iobroker:~ $ ls -l /dev/serial1 lrwxrwxrwx 1 root root 7 Jun 9 19:36 /dev/serial1 -> ttyAMA0 pi@raspi-iobroker:~ $ -
@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
@asgothian
Erst mal vielen Dank für den schnellen Support! -
@asgothian
@artekSchlechte Nachrichten: Das komplette löschen, installieren und neu Anlernen hat nichts gebracht.
Wie die letzten Tage auch hat sich der Adapter wieder innerhalb eines Tages aufgehängt. Ich mußte den Pi wieder komplett rebooten, damit es wieder geht.Hilfe, ich weiß mir absolut nicht mehr zu helfen. Was kann ich noch versuchen?
-
@asgothian
@artekSchlechte Nachrichten: Das komplette löschen, installieren und neu Anlernen hat nichts gebracht.
Wie die letzten Tage auch hat sich der Adapter wieder innerhalb eines Tages aufgehängt. Ich mußte den Pi wieder komplett rebooten, damit es wieder geht.Hilfe, ich weiß mir absolut nicht mehr zu helfen. Was kann ich noch versuchen?
Ich weis echt nicht mehr weiter.
Bekomme einfach nicht das Update vom 1.5.5 auf 1.5.6 hin.
iob im Docker Container mit 4gb auf einem Rock64
node.js - v12.18.3
npm - 6.14.6
zigbee stick CC2538 + CC2592 von dimaivBisher gab es nie die geringsten zigbee Updateprobleme. Nur die 1.5.6 bekomme ich nicht installiert.
Hier das Log:Was kann ich noch tun ?
-
Ich weis echt nicht mehr weiter.
Bekomme einfach nicht das Update vom 1.5.5 auf 1.5.6 hin.
iob im Docker Container mit 4gb auf einem Rock64
node.js - v12.18.3
npm - 6.14.6
zigbee stick CC2538 + CC2592 von dimaivBisher gab es nie die geringsten zigbee Updateprobleme. Nur die 1.5.6 bekomme ich nicht installiert.
Hier das Log:Was kann ich noch tun ?
-
@arteck Reicht da ein Downgrade adapter->Bestimmte version installieren -> 1.4.1 ?
Oder muss erst den Adapter (1.5.5) löschen?
Und falls löschen, wie kann ich alle meine Geräte behalten ohne alle neu anlernen zu müssen?Sry wenn die Fragen etwas naiv sein sollten. Ich sag ja, bisher reichte ein Knopfdruck und alles neu anlernen wäre hier ziemlich mit Arbeit verbunden bei kleinem Zeitfenster.
Jedenfalls schonmal danke für deine Hilfe.
-
@arteck Reicht da ein Downgrade adapter->Bestimmte version installieren -> 1.4.1 ?
Oder muss erst den Adapter (1.5.5) löschen?
Und falls löschen, wie kann ich alle meine Geräte behalten ohne alle neu anlernen zu müssen?Sry wenn die Fragen etwas naiv sein sollten. Ich sag ja, bisher reichte ein Knopfdruck und alles neu anlernen wäre hier ziemlich mit Arbeit verbunden bei kleinem Zeitfenster.
Jedenfalls schonmal danke für deine Hilfe.
FYI: Hatte gestern Abend auf die 1.5.5 herunter gegraded. Das Problem besteht immer noch: nach ziemlich genau 24 Stunden hängt sich der Adapter auf. Ich mußte den Pi gerade eben wieder booten.
Irgend eine Idee, was ich noch machen kann?
Und nochwas: Seit dem Downgrade bekomme ich ständig folgende Meldung im Log:
zigbee.0 (1671) Failed to DeviceConfigure.onZigbeeEvent (Error: 'LED1623G12' has no configure at Object.getConfigureKey (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/configureKey.js:20:15) at DeviceConfigure.shouldConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:33:38) at DeviceConfigure.onZigbeeEvent (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:76:22) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:196:42) at ZigbeeController.handleMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:560:14))Woher kommt LED1623G12? Ich habe alle Devices umbenannt, kann also nicht sagen, welches er meint. Irgend eine Idee?
-
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
-
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
-
FYI: Hatte gestern Abend auf die 1.5.5 herunter gegraded. Das Problem besteht immer noch: nach ziemlich genau 24 Stunden hängt sich der Adapter auf. Ich mußte den Pi gerade eben wieder booten.
Irgend eine Idee, was ich noch machen kann?
Und nochwas: Seit dem Downgrade bekomme ich ständig folgende Meldung im Log:
zigbee.0 (1671) Failed to DeviceConfigure.onZigbeeEvent (Error: 'LED1623G12' has no configure at Object.getConfigureKey (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/configureKey.js:20:15) at DeviceConfigure.shouldConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:33:38) at DeviceConfigure.onZigbeeEvent (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:76:22) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:196:42) at ZigbeeController.handleMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:560:14))Woher kommt LED1623G12? Ich habe alle Devices umbenannt, kann also nicht sagen, welches er meint. Irgend eine Idee?
-
@gosund da sist der Technische name .. nicht dein umbenanntess.das kannst du in der Kachel sehen ..wenn du die umdrehst
@Asgothian
Habe gerade mein bastelsystem hochgezogen auf Admin5.
Er spuckt mir jetzt für einige Gerätezigbee.0 2021-06-13 09:52:06.290 warn State value to set for "zigbee.0.0017880108279caf.link_quality" has value "255" greater than max "254"ins Log.
Ist das schon bekannt? -
@Asgothian
Habe gerade mein bastelsystem hochgezogen auf Admin5.
Er spuckt mir jetzt für einige Gerätezigbee.0 2021-06-13 09:52:06.290 warn State value to set for "zigbee.0.0017880108279caf.link_quality" has value "255" greater than max "254"ins Log.
Ist das schon bekannt? -
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
-
@arteck Prego!
-
@rushmed der Button meldet sich als W2049. ist so
-
@rushmed der Button meldet sich als W2049. ist so
@arteck Ja ok, stört mich auch nicht. Mein Problem ist dass nur die Hälfte der Tasten (als Objekte) gehen aber im debug LOG doch auch die anderen irgendwie ankommen wie in meinem Post geschrieben.
Im verlinkten Issue ist das Pairing das Problem, nicht dass die Tasten nur teilweise funktionieren. -
@rushmed sagte in ZigBee neue Version 1.5.x:
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
Hat hierzu keiner weiter eine Idee. Hab ich vll. an der falschen Stelle gepostet?
-
@rushmed sagte in ZigBee neue Version 1.5.x:
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
Hat hierzu keiner weiter eine Idee. Hab ich vll. an der falschen Stelle gepostet?
@rushmed Nein, hast du nicht. im Issue steht auch bereits das daran gearbeitet wird, aber das es noch dauern wird da es aktuell eine deutlich grössere Baustelle gibt.
Wenn Du magst kannst Du dich da aber auch selber heran wagen. Das Problem ist das die Definition der states über die exposes nicht zu den Nachrichten des Herdsman passt.
A.
Support us
847
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge