NEWS
ZigBee neue Version 1.5.x
-
@arteck
Danke für die schnelle Antwort. Muß ich danach wieder alle Gerät neu pairen?
Und wie mache ich das Downgrade am besten? Konsole oder Expertenmodus?@artek
Ok, ganz so einfach hat es dann doch nicht geklappt. Schlußendlich mußte ich den Adapter komplett löschen über die Konsole, dann die 1.4.1 installiert, danach das Update auf die 1.5.6 und dann das ZigBee Backup wieder eingespielt. Zumindest erkennt er jetzt wieder alle Geräte, jedoch fehlen bei den Objekten wieder die Rolle und Funktion.
Kann ich das irgendwie auch sichern und wiederherstellen? Ist ziemlich mühsam bei 16+ Geräten alles wieder von Hand einzufügen...Ob es etwas gebracht hat sehe ich wohl in den kommenden 24 Stunden.
-
@artek
Ok, ganz so einfach hat es dann doch nicht geklappt. Schlußendlich mußte ich den Adapter komplett löschen über die Konsole, dann die 1.4.1 installiert, danach das Update auf die 1.5.6 und dann das ZigBee Backup wieder eingespielt. Zumindest erkennt er jetzt wieder alle Geräte, jedoch fehlen bei den Objekten wieder die Rolle und Funktion.
Kann ich das irgendwie auch sichern und wiederherstellen? Ist ziemlich mühsam bei 16+ Geräten alles wieder von Hand einzufügen...Ob es etwas gebracht hat sehe ich wohl in den kommenden 24 Stunden.
-
@gosund hättest den Adapter nicht löschen müssen.. zumindest nicht aus der GUI raus
hintenrum hätte auch gereicht und dir blieben alle Objekte erhalten
@arteck
Zu früh gefreut. Der 1.5.6 Adapter kommt nicht mehr hoch:zigbee.0
2021-06-09 16:15:12.631 info Try to reconnect. 1 attempts left
zigbee.0
2021-06-09 16:15:02.627 error Error herdsman start
zigbee.0
2021-06-09 16:15:02.626 error Failed to start Zigbee
zigbee.0
2021-06-09 16:15:02.624 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
zigbee.0
2021-06-09 16:14:43.017 info Installed Version: iobroker.zigbee@1.5.6
zigbee.0
2021-06-09 16:14:42.721 info Starting Zigbee npm ...
zigbee.0
2021-06-09 16:14:42.627 info starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.12
zigbee.0
2021-06-09 16:14:37.116 error Cannot read property 'getEntries' of null
zigbee.0
2021-06-09 16:14:37.115 error TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16) at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31) at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49) at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41) at runMicrotasks (<anonymous>) at processTicksAndRejections (internal/process/task_queues.js:97:5)
zigbee.0
2021-06-09 16:14:37.113 error unhandled promise rejection: Cannot read property 'getEntries' of null
zigbee.0
2021-06-09 16:14:37.112 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). -
@arteck
Zu früh gefreut. Der 1.5.6 Adapter kommt nicht mehr hoch:zigbee.0
2021-06-09 16:15:12.631 info Try to reconnect. 1 attempts left
zigbee.0
2021-06-09 16:15:02.627 error Error herdsman start
zigbee.0
2021-06-09 16:15:02.626 error Failed to start Zigbee
zigbee.0
2021-06-09 16:15:02.624 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
zigbee.0
2021-06-09 16:14:43.017 info Installed Version: iobroker.zigbee@1.5.6
zigbee.0
2021-06-09 16:14:42.721 info Starting Zigbee npm ...
zigbee.0
2021-06-09 16:14:42.627 info starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.12
zigbee.0
2021-06-09 16:14:37.116 error Cannot read property 'getEntries' of null
zigbee.0
2021-06-09 16:14:37.115 error TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16) at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31) at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49) at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42) at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20) at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41) at runMicrotasks (<anonymous>) at processTicksAndRejections (internal/process/task_queues.js:97:5)
zigbee.0
2021-06-09 16:14:37.113 error unhandled promise rejection: Cannot read property 'getEntries' of null
zigbee.0
2021-06-09 16:14:37.112 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().@artek
Was hat es eigentlich mit der PAN Id nach dem Update auf sich?
Ich hatte diese unverändert auf 6754. Nach den ersten Problemen mit der 1.5.6 und dem Einspielen des Backups behauptete der Adapter im Log, die PAN wäre 6755. Nachdem ich umgestellt hatte, ging es -zumindest für ein paar Stunden.
Nach der neuerlichen Aktion mit Downgrade auf 1.4.1 und jetzt wieder Update auf 1.5.6 behauptet der Adapter, die PAN Id wäre ist die 6756 -
@artek
Was hat es eigentlich mit der PAN Id nach dem Update auf sich?
Ich hatte diese unverändert auf 6754. Nach den ersten Problemen mit der 1.5.6 und dem Einspielen des Backups behauptete der Adapter im Log, die PAN wäre 6755. Nachdem ich umgestellt hatte, ging es -zumindest für ein paar Stunden.
Nach der neuerlichen Aktion mit Downgrade auf 1.4.1 und jetzt wieder Update auf 1.5.6 behauptet der Adapter, die PAN Id wäre ist die 6756@gosund
Hast du zufällig die verschiedenen nvbackup.json Dateien von den Versionen, in denen erkennbar ist das die panID hochgezählt wird ? Ich gehe davon aus das da etwas in der Konfiguration im Herdsman passiert - Wir brauchen dafür aber die Möglichkeit das nachzustellen.Ich kann verstehen wenn Du das mit deinem "live" Zigbee Netz nicht tun willst. In diesem Fall müsstest Du erst einmal auf die 1.4.1 zurück gehen. Ich hoffe immer noch darauf eine zigbee-herdsman version zu finden die
- mit der 1.5.6 läuft
- das Problem nicht hat.
Sobald ich da etwas gefunden habe werde ich einen Link zur Testinstallation bereitstellen.
A.
-
@gosund
Hast du zufällig die verschiedenen nvbackup.json Dateien von den Versionen, in denen erkennbar ist das die panID hochgezählt wird ? Ich gehe davon aus das da etwas in der Konfiguration im Herdsman passiert - Wir brauchen dafür aber die Möglichkeit das nachzustellen.Ich kann verstehen wenn Du das mit deinem "live" Zigbee Netz nicht tun willst. In diesem Fall müsstest Du erst einmal auf die 1.4.1 zurück gehen. Ich hoffe immer noch darauf eine zigbee-herdsman version zu finden die
- mit der 1.5.6 läuft
- das Problem nicht hat.
Sobald ich da etwas gefunden habe werde ich einen Link zur Testinstallation bereitstellen.
A.
@asgothian
Nach Stromausfall kommt zigbee nicht mehr hoch:zigbee.0 2021-06-09 19:29:22.325 warn (3443) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:29:22.311 error (3443) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:29:22.310 error (3443) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:29:22.306 error (3443) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:29:22.305 error (3443) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:29:22.304 warn (3443) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:29:22.302 info (3443) terminating zigbee.0 2021-06-09 19:29:22.300 error (3443) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:29:22.296 info (3443) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:29:22.289 info (3443) cleaned everything up... zigbee.0 2021-06-09 19:29:22.279 error (3443) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:29:22.278 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:29:22.277 error (3443) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:29:22.275 error (3443) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:29:01.519 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:29:01.509 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:29:01.508 error (3443) Failed to start Zigbee zigbee.0 2021-06-09 19:29:01.326 info (3443) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:29:01.283 info (3443) Starting Zigbee npm ... zigbee.0 2021-06-09 19:29:01.281 info (3443) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:28:51.283 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:28:51.281 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:28:51.279 error (3443) Failed to start Zigbee zigbee.0 2021-06-09 19:28:51.106 info (3443) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:28:51.101 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:28:50.914 info (3443) Starting Zigbee npm ... zigbee.0 2021-06-09 19:28:50.821 info (3443) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 zigbee.0 2021-06-09 19:28:17.833 warn (3367) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:28:17.822 error (3367) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:28:17.821 error (3367) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:28:17.817 error (3367) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:28:17.816 error (3367) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:28:17.815 warn (3367) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:28:17.813 info (3367) terminating zigbee.0 2021-06-09 19:28:17.808 error (3367) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:28:17.804 info (3367) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:28:17.797 info (3367) cleaned everything up... zigbee.0 2021-06-09 19:28:17.783 error (3367) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:28:17.782 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:28:17.781 error (3367) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:28:17.779 error (3367) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:27:57.012 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:57.008 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:27:57.007 error (3367) Failed to start Zigbee zigbee.0 2021-06-09 19:27:56.797 info (3367) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:27:56.777 info (3367) Starting Zigbee npm ... zigbee.0 2021-06-09 19:27:56.776 info (3367) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:27:46.778 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:46.775 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:27:46.773 error (3367) Failed to start Zigbee zigbee.0 2021-06-09 19:27:46.630 info (3367) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:27:46.626 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:46.394 info (3367) Starting Zigbee npm ... zigbee.0 2021-06-09 19:27:46.294 info (3367) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 zigbee.0 2021-06-09 19:27:13.360 warn (3289) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:27:13.349 error (3289) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:27:13.348 error (3289) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:27:13.342 error (3289) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:27:13.341 error (3289) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:27:13.340 warn (3289) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:27:13.338 info (3289) terminating zigbee.0 2021-06-09 19:27:13.336 error (3289) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:27:13.332 info (3289) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:27:13.326 info (3289) cleaned everything up... -
@asgothian
Nach Stromausfall kommt zigbee nicht mehr hoch:zigbee.0 2021-06-09 19:29:22.325 warn (3443) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:29:22.311 error (3443) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:29:22.310 error (3443) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:29:22.306 error (3443) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:29:22.305 error (3443) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:29:22.304 warn (3443) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:29:22.302 info (3443) terminating zigbee.0 2021-06-09 19:29:22.300 error (3443) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:29:22.296 info (3443) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:29:22.289 info (3443) cleaned everything up... zigbee.0 2021-06-09 19:29:22.279 error (3443) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:29:22.278 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:29:22.277 error (3443) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:29:22.275 error (3443) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:29:01.519 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:29:01.509 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:29:01.508 error (3443) Failed to start Zigbee zigbee.0 2021-06-09 19:29:01.326 info (3443) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:29:01.283 info (3443) Starting Zigbee npm ... zigbee.0 2021-06-09 19:29:01.281 info (3443) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:28:51.283 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:28:51.281 error (3443) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:28:51.279 error (3443) Failed to start Zigbee zigbee.0 2021-06-09 19:28:51.106 info (3443) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:28:51.101 warn (3443) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:28:50.914 info (3443) Starting Zigbee npm ... zigbee.0 2021-06-09 19:28:50.821 info (3443) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 zigbee.0 2021-06-09 19:28:17.833 warn (3367) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:28:17.822 error (3367) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:28:17.821 error (3367) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:28:17.817 error (3367) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:28:17.816 error (3367) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:28:17.815 warn (3367) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:28:17.813 info (3367) terminating zigbee.0 2021-06-09 19:28:17.808 error (3367) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:28:17.804 info (3367) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:28:17.797 info (3367) cleaned everything up... zigbee.0 2021-06-09 19:28:17.783 error (3367) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:28:17.782 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:28:17.781 error (3367) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:28:17.779 error (3367) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:27:57.012 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:57.008 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:27:57.007 error (3367) Failed to start Zigbee zigbee.0 2021-06-09 19:27:56.797 info (3367) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:27:56.777 info (3367) Starting Zigbee npm ... zigbee.0 2021-06-09 19:27:56.776 info (3367) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:27:46.778 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:46.775 error (3367) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:27:46.773 error (3367) Failed to start Zigbee zigbee.0 2021-06-09 19:27:46.630 info (3367) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:27:46.626 warn (3367) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:27:46.394 info (3367) Starting Zigbee npm ... zigbee.0 2021-06-09 19:27:46.294 info (3367) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 zigbee.0 2021-06-09 19:27:13.360 warn (3289) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:27:13.349 error (3289) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:27:13.348 error (3289) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:27:13.342 error (3289) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:27:13.341 error (3289) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:27:13.340 warn (3289) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:27:13.338 info (3289) terminating zigbee.0 2021-06-09 19:27:13.336 error (3289) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:27:13.332 info (3289) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:27:13.326 info (3289) cleaned everything up...@ente34 sagte in ZigBee neue Version 1.5.x:
Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'
Entweder fehlt am Anfang des Logs noch einiges oder der Zigbee Stick ist seit dem Stromausfall defekt:
Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Nebenbei hast du mindestens 2 unterschiedliche Zigbee Versionen in deinem Log.
- Welche version hattest du vor dem Stromausfall aktiv (und am laufen?)
- Warum hast du gedacht das nach einem Stromausfall ein Update / Downgrade des Zigbee Adapters irgend etwas bewirkt ?
A.
-
@ente34 sagte in ZigBee neue Version 1.5.x:
Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'
Entweder fehlt am Anfang des Logs noch einiges oder der Zigbee Stick ist seit dem Stromausfall defekt:
Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Nebenbei hast du mindestens 2 unterschiedliche Zigbee Versionen in deinem Log.
- Welche version hattest du vor dem Stromausfall aktiv (und am laufen?)
- Warum hast du gedacht das nach einem Stromausfall ein Update / Downgrade des Zigbee Adapters irgend etwas bewirkt ?
A.
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6Nach reboot mit deaktiviertem Zigbee und dann nachdem alles hochgelaufen ist zigbee aktiviert:
zigbee.0 2021-06-09 19:41:24.425 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.423 error (1903) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:41:24.421 error (1903) Failed to start Zigbee zigbee.0 2021-06-09 19:41:24.264 info (1903) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:41:24.258 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.053 info (1903) Starting Zigbee npm ... zigbee.0 2021-06-09 19:41:23.960 info (1903) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:41:21.617 info instance system.adapter.zigbee.0 started with pid 1903 host.raspi-iobroker 2021-06-09 19:40:51.545 info Restart adapter system.adapter.zigbee.0 because enabled host.raspi-iobroker 2021-06-09 19:40:51.544 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-09 19:40:50.950 warn (1827) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:40:50.939 error (1827) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.938 error (1827) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:40:50.931 error (1827) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.928 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:50.926 warn (1827) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:40:50.924 info (1827) terminating zigbee.0 2021-06-09 19:40:50.922 error (1827) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:40:50.918 info (1827) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:40:50.912 info (1827) cleaned everything up... zigbee.0 2021-06-09 19:40:50.901 error (1827) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:40:50.900 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:50.899 error (1827) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:40:50.897 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:30.083 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:30.078 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:30.077 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:29.922 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:29.893 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:29.892 info (1827) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:40:19.893 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.891 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:19.890 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:19.728 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:19.724 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.492 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:19.377 info (1827) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:40:16.846 info instance system.adapter.zigbee.0 started with pid 1827 host.raspi-iobroker 2021-06-09 19:40:16.799 info "system.adapter.zigbee.0" enabled -
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6Nach reboot mit deaktiviertem Zigbee und dann nachdem alles hochgelaufen ist zigbee aktiviert:
zigbee.0 2021-06-09 19:41:24.425 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.423 error (1903) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:41:24.421 error (1903) Failed to start Zigbee zigbee.0 2021-06-09 19:41:24.264 info (1903) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:41:24.258 warn (1903) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:41:24.053 info (1903) Starting Zigbee npm ... zigbee.0 2021-06-09 19:41:23.960 info (1903) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:41:21.617 info instance system.adapter.zigbee.0 started with pid 1903 host.raspi-iobroker 2021-06-09 19:40:51.545 info Restart adapter system.adapter.zigbee.0 because enabled host.raspi-iobroker 2021-06-09 19:40:51.544 error instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION) zigbee.0 2021-06-09 19:40:50.950 warn (1827) Read-only state "zigbee.0.info.pairingMessage" has been written without ack-flag with value "Error: Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.l zigbee.0 2021-06-09 19:40:50.939 error (1827) Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.938 error (1827) TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:216:55) at Funct zigbee.0 2021-06-09 19:40:50.931 error (1827) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-06-09 19:40:50.928 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:50.926 warn (1827) Terminated (UNCAUGHT_EXCEPTION): Without reason zigbee.0 2021-06-09 19:40:50.924 info (1827) terminating zigbee.0 2021-06-09 19:40:50.922 error (1827) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.j zigbee.0 2021-06-09 19:40:50.918 info (1827) Zigbee: disabling joining new devices. zigbee.0 2021-06-09 19:40:50.912 info (1827) cleaned everything up... zigbee.0 2021-06-09 19:40:50.901 error (1827) Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' zigbee.0 2021-06-09 19:40:50.900 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:50.899 error (1827) unhandled promise rejection: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218 zigbee.0 2021-06-09 19:40:50.897 error (1827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). zigbee.0 2021-06-09 19:40:30.083 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:30.078 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:30.077 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:29.922 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:29.893 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:29.892 info (1827) Try to reconnect. 1 attempts left zigbee.0 2021-06-09 19:40:19.893 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.891 error (1827) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00' at Drive zigbee.0 2021-06-09 19:40:19.890 error (1827) Failed to start Zigbee zigbee.0 2021-06-09 19:40:19.728 info (1827) Installed Version: iobroker.zigbee@1.5.6 zigbee.0 2021-06-09 19:40:19.724 warn (1827) Read-only state "zigbee.0.info.connection" has been written without ack-flag with value "false" zigbee.0 2021-06-09 19:40:19.492 info (1827) Starting Zigbee npm ... zigbee.0 2021-06-09 19:40:19.377 info (1827) starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.3.11 host.raspi-iobroker 2021-06-09 19:40:16.846 info instance system.adapter.zigbee.0 started with pid 1827 host.raspi-iobroker 2021-06-09 19:40:16.799 info "system.adapter.zigbee.0" enabled@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
-
@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
@asgothian
Habe einen neuen link 'serial1'pi@raspi-iobroker:~ $ ls -l /dev/serial1 lrwxrwxrwx 1 root root 7 Jun 9 19:36 /dev/serial1 -> ttyAMA0 pi@raspi-iobroker:~ $ -
@ente34 sagte in ZigBee neue Version 1.5.x:
@asgothian
Habe versuchweise einen Downgrade durchgeführt.
Bin jetzt wieder bei 1.5.6:face_palm:
Um dem Problem auf den Grund zu gehen musst du heraus bekommen warum der serielle Port nicht mehr verfügbar ist. Das Log sagt eindeutig das symlink nicht existiert.
Insbesondere bei Stromausfällen / RaspberryPi Abstürzen / Proxxmox Updates die plötzlich einen laufenden Zigbee Adapter zerlegen ist zu 95% ein Problem mit der Verbindung zum Koordinator die Ursache.
A.
Nachtrag: Oh Wunder, auch in diesem Log findet sich bei jedem Startversuch die gleiche Meldung:
Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218746-if00'Der Stick wird also immer noch nicht erkannt.
@asgothian
Erst mal vielen Dank für den schnellen Support! -
@asgothian
@artekSchlechte Nachrichten: Das komplette löschen, installieren und neu Anlernen hat nichts gebracht.
Wie die letzten Tage auch hat sich der Adapter wieder innerhalb eines Tages aufgehängt. Ich mußte den Pi wieder komplett rebooten, damit es wieder geht.Hilfe, ich weiß mir absolut nicht mehr zu helfen. Was kann ich noch versuchen?
-
@asgothian
@artekSchlechte Nachrichten: Das komplette löschen, installieren und neu Anlernen hat nichts gebracht.
Wie die letzten Tage auch hat sich der Adapter wieder innerhalb eines Tages aufgehängt. Ich mußte den Pi wieder komplett rebooten, damit es wieder geht.Hilfe, ich weiß mir absolut nicht mehr zu helfen. Was kann ich noch versuchen?
Ich weis echt nicht mehr weiter.
Bekomme einfach nicht das Update vom 1.5.5 auf 1.5.6 hin.
iob im Docker Container mit 4gb auf einem Rock64
node.js - v12.18.3
npm - 6.14.6
zigbee stick CC2538 + CC2592 von dimaivBisher gab es nie die geringsten zigbee Updateprobleme. Nur die 1.5.6 bekomme ich nicht installiert.
Hier das Log:Was kann ich noch tun ?
-
Ich weis echt nicht mehr weiter.
Bekomme einfach nicht das Update vom 1.5.5 auf 1.5.6 hin.
iob im Docker Container mit 4gb auf einem Rock64
node.js - v12.18.3
npm - 6.14.6
zigbee stick CC2538 + CC2592 von dimaivBisher gab es nie die geringsten zigbee Updateprobleme. Nur die 1.5.6 bekomme ich nicht installiert.
Hier das Log:Was kann ich noch tun ?
-
@arteck Reicht da ein Downgrade adapter->Bestimmte version installieren -> 1.4.1 ?
Oder muss erst den Adapter (1.5.5) löschen?
Und falls löschen, wie kann ich alle meine Geräte behalten ohne alle neu anlernen zu müssen?Sry wenn die Fragen etwas naiv sein sollten. Ich sag ja, bisher reichte ein Knopfdruck und alles neu anlernen wäre hier ziemlich mit Arbeit verbunden bei kleinem Zeitfenster.
Jedenfalls schonmal danke für deine Hilfe.
-
@arteck Reicht da ein Downgrade adapter->Bestimmte version installieren -> 1.4.1 ?
Oder muss erst den Adapter (1.5.5) löschen?
Und falls löschen, wie kann ich alle meine Geräte behalten ohne alle neu anlernen zu müssen?Sry wenn die Fragen etwas naiv sein sollten. Ich sag ja, bisher reichte ein Knopfdruck und alles neu anlernen wäre hier ziemlich mit Arbeit verbunden bei kleinem Zeitfenster.
Jedenfalls schonmal danke für deine Hilfe.
FYI: Hatte gestern Abend auf die 1.5.5 herunter gegraded. Das Problem besteht immer noch: nach ziemlich genau 24 Stunden hängt sich der Adapter auf. Ich mußte den Pi gerade eben wieder booten.
Irgend eine Idee, was ich noch machen kann?
Und nochwas: Seit dem Downgrade bekomme ich ständig folgende Meldung im Log:
zigbee.0 (1671) Failed to DeviceConfigure.onZigbeeEvent (Error: 'LED1623G12' has no configure at Object.getConfigureKey (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/configureKey.js:20:15) at DeviceConfigure.shouldConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:33:38) at DeviceConfigure.onZigbeeEvent (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:76:22) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:196:42) at ZigbeeController.handleMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:560:14))Woher kommt LED1623G12? Ich habe alle Devices umbenannt, kann also nicht sagen, welches er meint. Irgend eine Idee?
-
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
-
Hallo,
ich komme gerade vom Ikea Einkauf und habe zwei kleine Probleme.
Die Fernbedienung STYRBAR wird vom Adapter als W2094 erkannt. Auf dem Gerät steht aber W2044 und in der Anleitung E2002. Das ist erstmal kein Problem für mich, allerdings funktionieren Druck und langer Druck nur bei den links/rechts Tasten. Die anderen beiden Tasten funktionieren garnicht.
Wenn ich STYRBAR direkt mit einer Lampe kopple geht alles.
Wenn ich den Adapter auf debug stelle kommen Tastendrücke an:zigbee.0 2021-06-12 19:09:59.315 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:59.300 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:59.299 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:59.297 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:58.939 debug (18506) Publish {"action":"brightness_move_down","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Type commandMove device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID" zigbee.0 2021-06-12 19:09:58.926 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:58.924 debug (18506) handleMessage. {"type":"commandMove","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260 zigbee.0 2021-06-12 19:09:57.127 debug (18506) Publish {"action":"brightness_stop","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:57.116 debug (18506) Type commandStopWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:57.114 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandStopWithOnOff', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:57.113 debug (18506) handleMessage. {"type":"commandStopWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:56.660 debug (18506) Publish {"action":"brightness_move_up","action_rate":83,"action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:56.644 debug (18506) Type commandMoveWithOnOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"p zigbee.0 2021-06-12 19:09:56.643 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandMoveWithOnOff', cluster 'genLevelCtrl', data '{"movemode":0,"rate":83}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:56.640 debug (18506) handleMessage. {"type":"commandMoveWithOnOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profi zigbee.0 2021-06-12 19:09:54.926 debug (18506) Publish {"action":"on","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:54.917 debug (18506) Type commandOn device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":2 zigbee.0 2021-06-12 19:09:54.916 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:54.915 debug (18506) handleMessage. {"type":"commandOn","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260," zigbee.0 2021-06-12 19:09:53.737 debug (18506) Publish {"action":"arrow_right_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:53.720 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:53.719 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:53.715 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1," zigbee.0 2021-06-12 19:09:52.576 debug (18506) Publish {"action":"off","action_group":901} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:52.563 debug (18506) Type commandOff device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID": zigbee.0 2021-06-12 19:09:52.561 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:52.558 debug (18506) handleMessage. {"type":"commandOff","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"profileID":260, zigbee.0 2021-06-12 19:09:51.208 debug (18506) Publish {"action":"arrow_left_click"} to "842e14fffe471ae1" zigbee.0 2021-06-12 19:09:51.199 debug (18506) Type commandTradfriArrowSingle device {"type":"device","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID" zigbee.0 2021-06-12 19:09:51.196 debug (18506) Received Zigbee message from '0x842e14fffe471ae1', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 901 zigbee.0 2021-06-12 19:09:51.194 debug (18506) handleMessage. {"type":"commandTradfriArrowSingle","device":{"ID":33,"_type":"EndDevice","_ieeeAddr":"0x842e14fffe471ae1","_networkAddress":24375,"_manufacturerID":4476,"_endpoints":[{"ID":1,"Der Timeout für die Erkennung des langen Drucks ist mit ca. 3 s auch sehr lang, kann man das irgendwo verstellen? Das ist zum Beispiel bei E1743 nur ca. 1 s, was viel besser passt.
Dann habe ich noch eine LED1924G9, die funktioniert soweit, außer die Effekte. Da tut sich garnichts.
Hat da jemand einen Tipp für mich?
-
FYI: Hatte gestern Abend auf die 1.5.5 herunter gegraded. Das Problem besteht immer noch: nach ziemlich genau 24 Stunden hängt sich der Adapter auf. Ich mußte den Pi gerade eben wieder booten.
Irgend eine Idee, was ich noch machen kann?
Und nochwas: Seit dem Downgrade bekomme ich ständig folgende Meldung im Log:
zigbee.0 (1671) Failed to DeviceConfigure.onZigbeeEvent (Error: 'LED1623G12' has no configure at Object.getConfigureKey (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/configureKey.js:20:15) at DeviceConfigure.shouldConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:33:38) at DeviceConfigure.onZigbeeEvent (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:76:22) at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:196:42) at ZigbeeController.handleMessage (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:560:14))Woher kommt LED1623G12? Ich habe alle Devices umbenannt, kann also nicht sagen, welches er meint. Irgend eine Idee?
Support us
140
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge