Fehlersuche?traeges Verhalten/Zigbee/IKEA/Blockly

Fred Freund

@fred-freund said in Fehlersuche?traeges Verhalten/Zigbee/IKEA/Blockly:

@asgothian
Danke! Für die Erklärung.
ändern aber wenn diese an sind nicht. Als würden sie sich selbst stören.

Eigenartig ist auch das Tradfir Bewegungsmelder und Schalter viel weiter weg (durch 2 Zimmer und anderes Stockwerk) eine bessere.. viel bessere Verbindung haben als die GUNNARD Lampe 5m entfernt.

Asgothian

@fred-freund
Das ist nicht unbedingt so seltsam.

Funkwellenausbreitung ist nicht "linear". Insbesondere innerhalb von Räumen gibt es durch die Wellenausbreitung immer wieder Bereiche wo der Abstand vom Sender nicht direkt mit der Feldstärke korreliert.
Das Gunnarp ist mit seinem Metallaufbau und dem darin verbauten Trafo denkbar ungünstig und kann daher deutlich schlechteren Empfang haben als ein weiter entfernt aber frei zugängliches Gerät.

A.

Fred Freund

@asgothian
Hi, ja scheint so das es so empfindlich ist.
Ich habe mich mit ZIgbee Kanal Auswahl
beschaeftigt und Kanal26 zum testen genommen. Da heute NICHTS MEHR GING und ALLES Status FALSE hatte

Nach Aenderung wurden auch die Schalter gefunden jedoch wird nach Absturz der Adapter Zigbee nurmehr Gelb.
und beim Oeffnen schreibt er mir :
You need to save and run adapter before pairing.
Die Serielle Auswahl passt hat er ja schon gefunden etc.
Sollte ich etwas aendern schreibt er mir
Some data are not stored, Discard?
Habe den Adapter schon geloescht , rebooted das selbe Problem.

Also : ein Shutdown und POWER OFF loeste das Adapter problem , mal sehen ob er wieder Probleme macht.

Asgothian

@fred-freund sagte in Fehlersuche?traeges Verhalten/Zigbee/IKEA/Blockly:

Also : ein Shutdown und POWER OFF loeste das Adapter problem , mal sehen ob er wieder Probleme macht.

Wenn so etwas passiert musst du im Log nachschauen was für Meldungen vorhanden sind. Das Log meldet im Normalfall recht genau weswegen die Hardware nicht startet.

A.

Fred Freund

@asgothian

2021-03-13 16:11:31.035  - info: zigbee.0 (1244) Currently no devices.
2021-03-13 16:11:31.036  - info: zigbee.0 (1244) Zigbee started
2021-03-13 16:11:44.136  - info: zigbee.0 (1244) Zigbee: allowing new devices to join.
2021-03-13 16:12:05.076  - info: zigbee.0 (1244) Starting interview of '0x5c0272fffe997f78'
2021-03-13 16:12:07.331  - warn: zigbee.0 (1244) Device '0x5c0272fffe997f78' announced itself
2021-03-13 16:12:45.446  - info: zigbee.0 (1244) Zigbee: stop joining
2021-03-13 16:12:46.687  - info: zigbee.0 (1244) Successfully interviewed '0x5c0272fffe997f78', device has succesfully been paired
2021-03-13 16:12:46.688  - info: zigbee.0 (1244) Device '0x5c0272fffe997f78' is supported, identified as: IKEA TRADFRI motion sensor (E1525/E1745)
2021-03-13 16:12:46.692  - info: zigbee.0 (1244) Configuring 0x5c0272fffe997f78 TRADFRI motion sensor
2021-03-13 16:12:53.918  - info: zigbee.0 (1244) DeviceConfigure successful 0x5c0272fffe997f78 TRADFRI motion sensor
2021-03-13 16:14:55.652  - info: zigbee.0 (1244) Zigbee: allowing new devices to join.
2021-03-13 16:15:21.445  - info: zigbee.0 (1244) Starting interview of '0x60a423fffeeecd67'
2021-03-13 16:15:24.855  - warn: zigbee.0 (1244) Device '0x60a423fffeeecd67' announced itself
2021-03-13 16:15:28.299  - error: zigbee.0 (1244) Adapter disconnected, stopping
2021-03-13 16:15:31.507  - error: zigbee.0 (1244) Failed to interview '0x60a423fffeeecd67', device has not succesfully been paired. undefined
2021-03-13 16:15:38.301  - info: zigbee.0 (1244) Try to reconnect. 5 attempts left
2021-03-13 16:15:38.303  - info: zigbee.0 (1244) Starting Zigbee  npm ...
2021-03-13 16:15:38.312  - error: zigbee.0 (1244) Failed to start Zigbee
2021-03-13 16:15:38.313  - error: zigbee.0 (1244) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM1'
    at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12)
    at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49)
    at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
    at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
2021-03-13 16:15:38.324  - info: zigbee.0 (1244) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 16:15:48.315  - info: zigbee.0 (1244) Try to reconnect. 4 attempts left
2021-03-13 16:15:48.317  - info: zigbee.0 (1244) Starting Zigbee  npm ...
2021-03-13 16:15:48.325  - error: zigbee.0 (1244) Failed to start Zigbee
2021-03-13 16:15:48.326  - error: zigbee.0 (1244) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM1'
    at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12)
    at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49)
    at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
    at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
2021-03-13 16:15:48.331  - info: zigbee.0 (1244) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 16:15:56.906  - info: zigbee.0 (1244) Zigbee: stop joining
2021-03-13 16:15:56.910  - error: zigbee.0 (1244) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-03-13 16:15:56.911  - error: zigbee.0 (1244) unhandled promise rejection: Cannot request when znp has not been initialized yet
2021-03-13 16:15:56.913  - error: zigbee.0 (1244) Error: Cannot request when znp has not been initialized yet
    at Znp.request (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:273:19)
    at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:808:28)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:23:12)
    at ZStackAdapter.dataRequestExtended (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:804:16)
    at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:453:28)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71
2021-03-13 16:15:56.913  - error: zigbee.0 (1244) Cannot request when znp has not been initialized yet
2021-03-13 16:15:56.963  - info: zigbee.0 (1244) cleaned everything up...
2021-03-13 16:15:56.966  - info: zigbee.0 (1244) Zigbee: disabling joining new devices.
2021-03-13 16:15:56.976  - error: zigbee.0 (1244) Failed to stop zigbee (Error: Cannot request when znp has not been initialized yet
    at Znp.request (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:273:19)
    at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:808:28)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:23:12)
    at ZStackAdapter.dataRequestExtended (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:804:16)
    at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:453:28)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:27:71)
2021-03-13 16:15:56.978  - info: zigbee.0 (1244) terminating
2021-03-13 16:15:56.980  - warn: zigbee.0 (1244) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-03-13 16:15:57.572  - error: host.broker1 instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-03-13 16:15:57.577  - info: host.broker1 Restart adapter system.adapter.zigbee.0 because enabled
2021-03-13 16:16:27.624  - info: host.broker1 instance system.adapter.zigbee.0 started with pid 1320
2021-03-13 16:16:29.882  - info: zigbee.0 (1320) starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.21.0, js-controller: 3.2.16
2021-03-13 16:16:29.974  - info: zigbee.0 (1320) Starting Zigbee  npm ...
2021-03-13 16:16:30.193  - error: zigbee.0 (1320) Failed to start Zigbee
2021-03-13 16:16:30.194  - error: zigbee.0 (1320) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM1'
    at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12)
    at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49)
    at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
    at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
2021-03-13 16:16:30.255  - info: zigbee.0 (1320) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 16:16:40.195  - info: zigbee.0 (1320) Try to reconnect. 1 attempts left
2021-03-13 16:16:40.196  - info: zigbee.0 (1320) Starting Zigbee  npm ...
2021-03-13 16:16:40.201  - error: zigbee.0 (1320) Failed to start Zigbee
2021-03-13 16:16:40.202  - error: zigbee.0 (1320) Error: Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/ttyACM1'
    at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32)
    at Generator.next (<anonymous>)
    at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71
    at new Promise (<anonymous>)
    at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12)
    at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49)
    at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
    at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
2021-03-13 16:16:40.205  - info: zigbee.0 (1320) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d

Das passiert beim anlernen der Gunnarp Lampe ...
Motion Sensor hat kein Problem gemacht..

Asgothian

@fred-freund Dir ist die serielle Schnittstelle abgestürzt.

2021-03-13 16:15:28.299  - error: zigbee.0 (1244) Adapter disconnected, stopping

Das ist ein Hinweis darauf das er die Kommunikation zum Zigbee-Stick verloren hat.

Error: No such file or directory, cannot open /dev/ttyACM1'

Diese Meldung besagt das der link zum seriellen Port nicht existiert.

Da gibt es also ein problem mit dem Rechner an dem das steckt oder der Firmware / Hardware auf dem Koordinator.

A.

Fred Freund

@asgothian
Interpretiere ich den Scan richtig dort wo nichts ist waere der beste Kanal?

Also software reset habe ich keinen gefunden, aber aus einstecken des cc2531 funktioniert auch...
ttyACM1 ist dann wieder da

Asgothian

@fred-freund Ja, das sind die "leeren" Kanäle. Allerdings musst du mit den nicht ZLL Kanälen (ZLL Kanäle sind 11,15,20,26) Vorsichtig sein, nicht alle Geräte laufen darauf

Fred Freund

@asgothian
Habe jetzt mal den 26er Kanal genommen...die Switches und Bewegungsmelder Tradfir werden identifiziert und funktionieren.
Die Lampen geben diesen Error und dann steigt der CC2531 aus.
Nach dem reboot ist nur

zu sehen.
Beim Speicher bekomme ich immer diese Meldung:

Hoffe Dienstag ist es besser mit cc26xr21

Also default war 11 eingestellt das hat recht gut funktioniert , momentan geht garnichts und Schalte und BM ohne Lampen machen keinen Sinn

Asgothian

@fred-freund
Wie schon oben beschrieben.. Interessant ist was im log steht.

A.

Fred Freund

@asgothian

das nicht vollstaendige Geraet laesst sich auch nicht loeschen...

Also adapter gloescht neu , usb
/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CD48243-if00

2021-03-13 22:05:28.885  - error: zigbee.0 (1280) Serial port not selected! Go to settings page.
2021-03-13 22:05:28.942  - info: zigbee.0 (1280) Starting Zigbee  npm ...
2021-03-13 22:05:29.239  - info: zigbee.0 (1280) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 22:05:31.251  - info: zigbee.0 (1280) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
2021-03-13 22:05:31.263  - info: zigbee.0 (1280)   --> transmitPower : normal
2021-03-13 22:05:31.272  - info: zigbee.0 (1280) Currently no devices.
2021-03-13 22:05:31.274  - info: zigbee.0 (1280) Zigbee started
2021-03-13 22:08:06.054  - info: host.broker1 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-03-13 22:08:06.065  - info: zigbee.0 (1280) Got terminate signal TERMINATE_YOURSELF
2021-03-13 22:08:06.067  - info: host.broker1 stopInstance system.adapter.zigbee.0 send kill signal
2021-03-13 22:08:06.069  - info: zigbee.0 (1280) cleaned everything up...
2021-03-13 22:08:06.074  - info: zigbee.0 (1280) Zigbee: disabling joining new devices.
2021-03-13 22:08:06.331  - info: zigbee.0 (1280) terminating
2021-03-13 22:08:06.333  - info: zigbee.0 (1280) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-13 22:08:06.973  - info: host.broker1 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-13 22:08:09.116  - info: host.broker1 instance system.adapter.zigbee.0 started with pid 1327
2021-03-13 22:08:11.470  - info: zigbee.0 (1327) starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.21.0, js-controller: 3.2.16
2021-03-13 22:08:11.564  - info: zigbee.0 (1327) Starting Zigbee  npm ...
2021-03-13 22:08:11.892  - info: zigbee.0 (1327) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 22:08:19.630  - info: zigbee.0 (1327) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
2021-03-13 22:08:19.644  - info: zigbee.0 (1327)   --> transmitPower : normal
2021-03-13 22:08:19.653  - info: zigbee.0 (1327) Currently no devices.
2021-03-13 22:08:19.655  - info: zigbee.0 (1327) Zigbee started
2021-03-13 22:08:56.483  - info: host.broker1 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-03-13 22:08:56.524  - info: zigbee.0 (1327) Got terminate signal TERMINATE_YOURSELF
2021-03-13 22:08:56.525  - info: host.broker1 stopInstance system.adapter.zigbee.0 send kill signal
2021-03-13 22:08:56.526  - info: zigbee.0 (1327) cleaned everything up...
2021-03-13 22:08:56.528  - info: zigbee.0 (1327) Zigbee: disabling joining new devices.
2021-03-13 22:08:56.774  - info: zigbee.0 (1327) terminating
2021-03-13 22:08:56.776  - info: zigbee.0 (1327) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-13 22:08:57.444  - info: host.broker1 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-13 22:08:59.587  - info: host.broker1 instance system.adapter.zigbee.0 started with pid 1357
2021-03-13 22:09:01.965  - info: zigbee.0 (1357) starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.21.0, js-controller: 3.2.16
2021-03-13 22:09:02.068  - info: zigbee.0 (1357) Starting Zigbee  npm ...
2021-03-13 22:09:02.365  - info: zigbee.0 (1357) Installed Version: ioBroker/ioBroker.zigbee#47e641cb8ec3756b16e5b7ff817fbf93502e295d
2021-03-13 22:09:09.651  - info: zigbee.0 (1357) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
2021-03-13 22:09:09.664  - info: zigbee.0 (1357)   --> transmitPower : normal
2021-03-13 22:09:09.673  - info: zigbee.0 (1357) Currently no devices.
2021-03-13 22:09:09.675  - info: zigbee.0 (1357) Zigbee started
2021-03-13 22:09:21.759  - info: zigbee.0 (1357) Zigbee: allowing new devices to join.
2021-03-13 22:09:47.509  - info: zigbee.0 (1357) Starting interview of '0x60a423fffeeecd67'
2021-03-13 22:09:50.919  - warn: zigbee.0 (1357) Device '0x60a423fffeeecd67' announced itself
2021-03-13 22:10:23.059  - info: zigbee.0 (1357) Zigbee: stop joining
2021-03-13 22:10:33.542  - error: zigbee.0 (1357) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-03-13 22:10:33.544  - error: zigbee.0 (1357) unhandled promise rejection: SRSP - AF - dataRequestExt after 6000ms
2021-03-13 22:10:33.546  - error: zigbee.0 (1357) Error: SRSP - AF - dataRequestExt after 6000ms
    at Timeout._onTimeout (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:67:35)
    at listOnTimeout (internal/timers.js:554:17)
    at processTimers (internal/timers.js:497:7)
2021-03-13 22:10:33.547  - error: zigbee.0 (1357) SRSP - AF - dataRequestExt after 6000ms
2021-03-13 22:10:33.578  - info: zigbee.0 (1357) cleaned everything up...
2021-03-13 22:10:33.582  - info: zigbee.0 (1357) Zigbee: disabling joining new devices.
2021-03-13 22:10:34.082  - info: zigbee.0 (1357) terminating
2021-03-13 22:10:34.085  - warn: zigbee.0 (1357) Terminated (UNCAUGHT_EXCEPTION): Without reason

Dann ist der Adapter wieder gelb und ist weg. Ich geb mal vorerst auf!
Danke

Fred Freund

Hallo,
wollte euch nur sagen habe mit meine Raspi und mit Hilfe der Anleitung
CC2531Flash ohne CCdebugger
Neu geflashed und jetzt findet er die Lampe aus einer super Entfernung! wo ich vorher auf 10cm hingehen musste und einen Error bekam.

2021-03-15 00:09:03.793  - info: host.broker1 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-03-15 00:09:03.850  - info: zigbee.0 (1178) Got terminate signal TERMINATE_YOURSELF
2021-03-15 00:09:03.851  - info: host.broker1 stopInstance system.adapter.zigbee.0 send kill signal
2021-03-15 00:09:03.852  - info: zigbee.0 (1178) cleaned everything up...
2021-03-15 00:09:03.857  - warn: zigbee.0 (1178) Failed to stop zigbee during startup
2021-03-15 00:09:03.858  - info: zigbee.0 (1178) terminating
2021-03-15 00:09:03.859  - info: zigbee.0 (1178) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-15 00:09:04.405  - info: host.broker1 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-15 00:09:06.902  - info: host.broker1 instance system.adapter.zigbee.0 started with pid 1699
2021-03-15 00:09:09.099  - info: zigbee.0 (1699) starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.21.0, js-controller: 3.2.16
2021-03-15 00:09:09.142  - info: zigbee.0 (1699) Starting Zigbee  npm ...
2021-03-15 00:09:09.438  - info: zigbee.0 (1699) Installed Version: ioBroker/ioBroker.zigbee#cd902e1bafcb9ff16c582741d4f027b639a644c1
2021-03-15 00:09:14.864  - info: zigbee.0 (1699) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20201128}}
2021-03-15 00:09:14.877  - info: zigbee.0 (1699)   --> transmitPower : normal
2021-03-15 00:09:14.885  - info: zigbee.0 (1699) Currently no devices.
2021-03-15 00:09:14.887  - info: zigbee.0 (1699) Zigbee started
2021-03-15 00:09:14.948  - info: host.broker1 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-03-15 00:09:14.953  - info: zigbee.0 (1699) Got terminate signal TERMINATE_YOURSELF
2021-03-15 00:09:14.954  - info: host.broker1 stopInstance system.adapter.zigbee.0 send kill signal
2021-03-15 00:09:14.955  - info: zigbee.0 (1699) cleaned everything up...
2021-03-15 00:09:14.958  - info: zigbee.0 (1699) Zigbee: disabling joining new devices.
2021-03-15 00:09:15.198  - info: zigbee.0 (1699) terminating
2021-03-15 00:09:15.199  - info: zigbee.0 (1699) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-15 00:09:15.789  - info: host.broker1 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-15 00:09:17.990  - info: host.broker1 instance system.adapter.zigbee.0 started with pid 1715
2021-03-15 00:09:20.103  - info: zigbee.0 (1715) starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.21.0, js-controller: 3.2.16
2021-03-15 00:09:20.233  - info: zigbee.0 (1715) Starting Zigbee  npm ...
2021-03-15 00:09:20.533  - info: zigbee.0 (1715) Installed Version: ioBroker/ioBroker.zigbee#cd902e1bafcb9ff16c582741d4f027b639a644c1
2021-03-15 00:09:22.516  - info: zigbee.0 (1715) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20201128}}
2021-03-15 00:09:22.528  - info: zigbee.0 (1715)   --> transmitPower : normal
2021-03-15 00:09:22.536  - info: zigbee.0 (1715) Currently no devices.
2021-03-15 00:09:22.538  - info: zigbee.0 (1715) Zigbee started
2021-03-15 00:09:43.873  - info: zigbee.0 (1715) Zigbee: allowing new devices to join.
2021-03-15 00:10:00.812  - info: zigbee.0 (1715) Starting interview of '0x60a423fffeebdcf4'
2021-03-15 00:10:03.214  - warn: zigbee.0 (1715) Device '0x60a423fffeebdcf4' announced itself
2021-03-15 00:10:45.165  - info: zigbee.0 (1715) Zigbee: stop joining
2021-03-15 00:10:48.491  - info: zigbee.0 (1715) Successfully interviewed '0x60a423fffeebdcf4', device has succesfully been paired
2021-03-15 00:10:48.492  - info: zigbee.0 (1715) Device '0x60a423fffeebdcf4' is supported, identified as: IKEA TRADFRI remote control (E1524/E1810)
2021-03-15 00:10:48.496  - info: zigbee.0 (1715) Configuring 0x60a423fffeebdcf4 TRADFRI remote control
2021-03-15 00:10:57.741  - info: zigbee.0 (1715) DeviceConfigure successful 0x60a423fffeebdcf4 TRADFRI remote control
2021-03-15 00:11:59.436  - info: zigbee.0 (1715) Zigbee: allowing new devices to join.
2021-03-15 00:12:27.266  - info: zigbee.0 (1715) Starting interview of '0x60a423fffeeecd67'
2021-03-15 00:12:31.127  - warn: zigbee.0 (1715) Device '0x60a423fffeeecd67' announced itself
2021-03-15 00:12:41.393  - info: zigbee.0 (1715) Successfully interviewed '0x60a423fffeeecd67', device has succesfully been paired
2021-03-15 00:12:41.394  - info: zigbee.0 (1715) Device '0x60a423fffeeecd67' is supported, identified as: IKEA GUNNARP panel round (T1828)
2021-03-15 00:12:41.397  - info: zigbee.0 (1715) Configuring 0x60a423fffeeecd67 GUNNARP panel round
2021-03-15 00:12:41.576  - info: zigbee.0 (1715) DeviceConfigure successful 0x60a423fffeeecd67 GUNNARP panel round
2021-03-15 00:13:00.706  - info: zigbee.0 (1715) Zigbee: stop joining

arteck

@fred-freund na ich hoffe du hast nicht die firmware genommen die da im beitrag stand vom April die ist nämlich fehlerhaft

Fred Freund

@arteck Nein Nein , aber Danke.
Also das Hex zu finden war fuer mich nicht leicht.

HIER fuer den cc2531

Genau in diesem ZIP

NEWS

Fehlersuche?traeges Verhalten/Zigbee/IKEA/Blockly

Support us

919
Online

32.1k
Users

80.7k
Topics

1.3m
Posts

NEWS

Fehlersuche?traeges Verhalten/Zigbee/IKEA/Blockly

Support us

919Online

32.1kUsers

80.7kTopics

1.3mPosts

919
Online

32.1k
Users

80.7k
Topics

1.3m
Posts