SyntaxError: Unexpected Tokken
-
@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
iobroker status
code_textpi@All-In-One_RasPi:/opt/iobroker $ iobroker status iobroker is not running on this host. No iobroker host is running. Objects type: file States type: redis pi@All-In-One_RasPi:/opt/iobroker $@Finnimeister
Auf mal auf redis umgestellt?sudo usermod -a -G redis iobroker -
@Finnimeister
Auf mal auf redis umgestellt?sudo usermod -a -G redis iobroker@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
sudo usermod -a -G redis iobroker
code_textpi@All-In-One_RasPi:/opt/iobroker $ sudo usermod -a -G redis iobroker pi@All-In-One_RasPi:/opt/iobroker $ passiert nix -
@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
sudo usermod -a -G redis iobroker
code_textpi@All-In-One_RasPi:/opt/iobroker $ sudo usermod -a -G redis iobroker pi@All-In-One_RasPi:/opt/iobroker $ passiert nixStarte mal durch.
Danach sollten die Gruppen mindestens so aussehen:sudo -u iobroker groups iobroker redis -
Starte mal durch.
Danach sollten die Gruppen mindestens so aussehen:sudo -u iobroker groups iobroker redis@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
sudo -u iobroker groups
iobroker rediscode_textpi@All-In-One_RasPi:/opt/iobroker $ sudo -u iobroker groups iobroker tty dialout audio video bluetooth redis gpio i2c pi@All-In-One_RasPi:/opt/iobroker $ iobroker redis Commands: iobroker setup [--objects <host>] [--states <host>] [custom] iobroker start - starts the js-controller iobroker stop - stops the js-controller iobroker start <adapter>[.instance] - starts a specified adapter instance iobroker stop <adapter>.[instance] - stops a specified adapter instance iobroker start all - starts js-controller and all adapters iobroker restart - restarts the js-controller iobroker restart <adapter>[.instance] - restarts a specified adapter iobroker debug <adapter> [--ip=<ip>] [--port=<port>] [--wait] - Starts a Node.js debugging session for the adapter --wait stops the execution until the debugger is attached. --ip and --port can be used to change the listen IP and port. Use IP 0.0.0.0 for remote debugging. iobroker info - shows the host info iobroker logs [adapter] [--watch] [--lines=1000] iobroker add <adapter> [desiredNumber] [--enabled] [--host <host>] [--port <port>] iobroker install <adapter> - installs a specified adapter iobroker rebuild <adapter>|self [--install] iobroker url <url> [<name>] - install adapter from specified url, e.g. GitHub iobroker del <adapter> - remove adapter from system iobroker del <adapter>.<instance> - remove adapter instance iobroker update [repository url] [--updatable/--u] [--installed/--i] [--force/--f] - update repository and optionally filter installed/updateable adapters, use --force to bypass hash check iobroker upgrade [repository url] iobroker upgrade self [repository url] - upgrade js-controller and all adapters, optionally you can specify the repository url iobroker upgrade <adapter> [repository url] - upgrade specified adapter, optionally you can specify the repository url iobroker upload <pathToLocalFile> <pathIniobroker> iobroker upload all - upload all adapter files to make them available for instances iobroker upload <adapter> - upload specified adapter files to make them available for instances iobroker object get <id> - get object specified by id iobroker object set <id> <json-value> - set object with the given id by providing a new json object iobroker object set <id> propertyname=<value or json-value> - update part of the object by providing a new value or partial object iobroker object extend <id> <json-value> - extend object with the given id by providing a new json object iobroker object del <id|pattern> [--yes] iobroker object chmod <object-mode> [state-mode] <id> iobroker object chown <user> <group> <id> iobroker object list <id> iobroker state get <id> - get state, specified by id iobroker state getplain <id> [--pretty] iobroker state getvalue <id> iobroker state set <id> <value> [ack] iobroker state del <id> iobroker message <adapter>[.instance] <command> [<message>] iobroker list <type> [filter] iobroker chmod <mode> <file> iobroker chown <user> <group> <file> iobroker touch <file> iobroker rm <file> iobroker file read <iobroker-path-to-read> [<filesystem-path-to-write>] iobroker file write <filesystem-path-to-read> <iobroker-path-to-write> iobroker file rm <iobroker-path-to-delete> iobroker file sync iobroker user add <user> [--ingroup group] [--password pass] iobroker user del <user> iobroker user passwd <user> [--password pass] iobroker user enable <user> iobroker user disable <user> iobroker user get <user> iobroker user check <user> [--password pass] iobroker group add <group> iobroker group del <group> iobroker group list <group> iobroker group enable <group> iobroker group disable <group> iobroker group get <group> iobroker group adduser <group> <user> iobroker group deluser <group> <user> iobroker host this iobroker host <hostname> iobroker host set <hostname> iobroker host remove <hostname> iobroker set <adapter>.<instance> [--port port] [--ip address] [--ssl true|false] iobroker license <license.file or license.text> iobroker cert create iobroker cert view [<certificate name>] iobroker clean iobroker backup iobroker restore <backup name or path> - restore a specified backup iobroker validate <backup name or path> - validate a specified backup iobroker <command> --timeout 5000 iobroker status [all|<adapter>.<instance>] iobroker repo [name] iobroker repo add <name> <path or url> iobroker repo set <name> iobroker repo del <name> iobroker uuid iobroker unsetup iobroker fix - execute the installation fixer script, this updates your ioBroker installation iobroker multihost <enable|disable> [--secure true|false] iobroker multihost browse iobroker multihost connect iobroker compact status - show if compact mode is enabled in general iobroker compact <enable|on|disable|off> - enable or disable compact mode in general iobroker compact <adapter>.<instance> status - show if compact mode is enabled for a specific instance iobroker compact <adapter>.<instance> group <group-id> - define compact group of a specific adapter iobroker compact <adapter>.<instance> <disable|off> - enable or disable compact mode for specified adapter instance iobroker compact <adapter>.<instance> <enable|on> [group-id] - enable or disable compact mode for specified adapter instance and set comapct group optionally iobroker plugin enable <pluginname> [--host <hostname>] - enables a plugin for the specified host. If no host is specified, the current one is used iobroker plugin disable <pluginname> [--host <hostname>] - disables a plugin for the specified host. If no host is specified, the current one is used iobroker plugin status <pluginname> [--host <hostname>] - checks if a plugin is enabled for the specified host. If no host is specified, the current one is used iobroker plugin enable <pluginname> --instance <adapter>[.<nr>] - enables a plugin for the specified adapter instance (defaults to instance 0) iobroker plugin disable <pluginname> --instance <adapter>[.<nr>] - disables a plugin for the specified adapter instance (defaults to instance 0) iobroker plugin status <pluginname> --instance <adapter>[.<nr>] - checks if a plugin is enabled for the specified adapter instance (defaults to instance 0) iobroker version [adapter] - show version of js-controller or specified adapter iobroker [adapter] -v - show version of js-controller or specified adapter Options: --help Hilfe anzeigen [boolean] --version Version anzeigen [boolean] pi@All-In-One_RasPi:/opt/iobroker $ -
@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
sudo -u iobroker groups
iobroker rediscode_textpi@All-In-One_RasPi:/opt/iobroker $ sudo -u iobroker groups iobroker tty dialout audio video bluetooth redis gpio i2c pi@All-In-One_RasPi:/opt/iobroker $ iobroker redis Commands: iobroker setup [--objects <host>] [--states <host>] [custom] iobroker start - starts the js-controller iobroker stop - stops the js-controller iobroker start <adapter>[.instance] - starts a specified adapter instance iobroker stop <adapter>.[instance] - stops a specified adapter instance iobroker start all - starts js-controller and all adapters iobroker restart - restarts the js-controller iobroker restart <adapter>[.instance] - restarts a specified adapter iobroker debug <adapter> [--ip=<ip>] [--port=<port>] [--wait] - Starts a Node.js debugging session for the adapter --wait stops the execution until the debugger is attached. --ip and --port can be used to change the listen IP and port. Use IP 0.0.0.0 for remote debugging. iobroker info - shows the host info iobroker logs [adapter] [--watch] [--lines=1000] iobroker add <adapter> [desiredNumber] [--enabled] [--host <host>] [--port <port>] iobroker install <adapter> - installs a specified adapter iobroker rebuild <adapter>|self [--install] iobroker url <url> [<name>] - install adapter from specified url, e.g. GitHub iobroker del <adapter> - remove adapter from system iobroker del <adapter>.<instance> - remove adapter instance iobroker update [repository url] [--updatable/--u] [--installed/--i] [--force/--f] - update repository and optionally filter installed/updateable adapters, use --force to bypass hash check iobroker upgrade [repository url] iobroker upgrade self [repository url] - upgrade js-controller and all adapters, optionally you can specify the repository url iobroker upgrade <adapter> [repository url] - upgrade specified adapter, optionally you can specify the repository url iobroker upload <pathToLocalFile> <pathIniobroker> iobroker upload all - upload all adapter files to make them available for instances iobroker upload <adapter> - upload specified adapter files to make them available for instances iobroker object get <id> - get object specified by id iobroker object set <id> <json-value> - set object with the given id by providing a new json object iobroker object set <id> propertyname=<value or json-value> - update part of the object by providing a new value or partial object iobroker object extend <id> <json-value> - extend object with the given id by providing a new json object iobroker object del <id|pattern> [--yes] iobroker object chmod <object-mode> [state-mode] <id> iobroker object chown <user> <group> <id> iobroker object list <id> iobroker state get <id> - get state, specified by id iobroker state getplain <id> [--pretty] iobroker state getvalue <id> iobroker state set <id> <value> [ack] iobroker state del <id> iobroker message <adapter>[.instance] <command> [<message>] iobroker list <type> [filter] iobroker chmod <mode> <file> iobroker chown <user> <group> <file> iobroker touch <file> iobroker rm <file> iobroker file read <iobroker-path-to-read> [<filesystem-path-to-write>] iobroker file write <filesystem-path-to-read> <iobroker-path-to-write> iobroker file rm <iobroker-path-to-delete> iobroker file sync iobroker user add <user> [--ingroup group] [--password pass] iobroker user del <user> iobroker user passwd <user> [--password pass] iobroker user enable <user> iobroker user disable <user> iobroker user get <user> iobroker user check <user> [--password pass] iobroker group add <group> iobroker group del <group> iobroker group list <group> iobroker group enable <group> iobroker group disable <group> iobroker group get <group> iobroker group adduser <group> <user> iobroker group deluser <group> <user> iobroker host this iobroker host <hostname> iobroker host set <hostname> iobroker host remove <hostname> iobroker set <adapter>.<instance> [--port port] [--ip address] [--ssl true|false] iobroker license <license.file or license.text> iobroker cert create iobroker cert view [<certificate name>] iobroker clean iobroker backup iobroker restore <backup name or path> - restore a specified backup iobroker validate <backup name or path> - validate a specified backup iobroker <command> --timeout 5000 iobroker status [all|<adapter>.<instance>] iobroker repo [name] iobroker repo add <name> <path or url> iobroker repo set <name> iobroker repo del <name> iobroker uuid iobroker unsetup iobroker fix - execute the installation fixer script, this updates your ioBroker installation iobroker multihost <enable|disable> [--secure true|false] iobroker multihost browse iobroker multihost connect iobroker compact status - show if compact mode is enabled in general iobroker compact <enable|on|disable|off> - enable or disable compact mode in general iobroker compact <adapter>.<instance> status - show if compact mode is enabled for a specific instance iobroker compact <adapter>.<instance> group <group-id> - define compact group of a specific adapter iobroker compact <adapter>.<instance> <disable|off> - enable or disable compact mode for specified adapter instance iobroker compact <adapter>.<instance> <enable|on> [group-id] - enable or disable compact mode for specified adapter instance and set comapct group optionally iobroker plugin enable <pluginname> [--host <hostname>] - enables a plugin for the specified host. If no host is specified, the current one is used iobroker plugin disable <pluginname> [--host <hostname>] - disables a plugin for the specified host. If no host is specified, the current one is used iobroker plugin status <pluginname> [--host <hostname>] - checks if a plugin is enabled for the specified host. If no host is specified, the current one is used iobroker plugin enable <pluginname> --instance <adapter>[.<nr>] - enables a plugin for the specified adapter instance (defaults to instance 0) iobroker plugin disable <pluginname> --instance <adapter>[.<nr>] - disables a plugin for the specified adapter instance (defaults to instance 0) iobroker plugin status <pluginname> --instance <adapter>[.<nr>] - checks if a plugin is enabled for the specified adapter instance (defaults to instance 0) iobroker version [adapter] - show version of js-controller or specified adapter iobroker [adapter] -v - show version of js-controller or specified adapter Options: --help Hilfe anzeigen [boolean] --version Version anzeigen [boolean] pi@All-In-One_RasPi:/opt/iobroker $@Finnimeister
Und nu? Lüppt das Ding?iobroker status iobroker version -
@Finnimeister
Und nu? Lüppt das Ding?iobroker status iobroker version@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
iobroker version
code_textpi@All-In-One_RasPi:/opt/iobroker $ iobroker status iobroker is not running on this host. No iobroker host is running. Objects type: file States type: redis pi@All-In-One_RasPi:/opt/iobroker $ iobroker version 3.1.6 pi@All-In-One_RasPi:/opt/iobroker $ -
@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
iobroker version
code_textpi@All-In-One_RasPi:/opt/iobroker $ iobroker status iobroker is not running on this host. No iobroker host is running. Objects type: file States type: redis pi@All-In-One_RasPi:/opt/iobroker $ iobroker version 3.1.6 pi@All-In-One_RasPi:/opt/iobroker $@Finnimeister
Hast du das mal auf redis umgestellt?
Ist das ein Multi-Host-Setup? -
ich hab da nichts umgestellt.....nicht bewusst....
hab nur das gemacht was du gesagt hast. -
@Finnimeister
Hast du das mal auf redis umgestellt?
Ist das ein Multi-Host-Setup?@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
Hast du das mal auf redis umgestellt?
wenn das ein uraltes All-In-One Image war, ist da redis aktiviert gewesen
-
@Thomas-Braun sagte in SyntaxError: Unexpected Tokken:
Hast du das mal auf redis umgestellt?
wenn das ein uraltes All-In-One Image war, ist da redis aktiviert gewesen
-
hab es durchlaufen lassen ,aber das sytem kan ich nicht starten...
@Finnimeister sagte in SyntaxError: Unexpected Tokken:
aber das sytem kan ich nicht starten...
was steht im log (/opt/iobroker/log/Datum_von_heute)
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@Finnimeister sagte in SyntaxError: Unexpected Tokken:
aber das sytem kan ich nicht starten...
was steht im log (/opt/iobroker/log/Datum_von_heute)
@Homoran sagte in SyntaxError: Unexpected Tokken:
/opt/iobroker/log/Datum_von_heute
wie muss ich das eingeben
-
Danke!!!Alles läuft wieder....
-
@Finnimeister sagte in SyntaxError: Unexpected Tokken:
aber das sytem kan ich nicht starten...
was steht im log (/opt/iobroker/log/Datum_von_heute)
@Homoran Ich habe auch Probleme mit dem KM200. Das steht im Log:
Unter "Instanzen" ist der Adapter grün. Unter "Objekte" steht "Unexpected Token"
{
"error": {},
"error_description": "SyntaxError: Unexpected token � in JSON at position 0 on string ��c�F�یa\u0014���\t��",
"valIs": "values"
}
Ich bin ratlos. Hat jemand eine Idee?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden571
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge