UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Dutchman]

@Kampfratte sagte in Test Coronavirus Statistics for ioBroker:

@Dutchman das Update auf 0.5.9 wegen dem Fehler, dass der Adapter nicht gestartet werden kann, da er noch läuft, hatte nix gebracht. Habe heute den Fehler wieder. 14:15 wurde er das letzte mal ordentlich ausgeführt und nicht beendet.

gibt es irgendend etwas im log rund dies zeit +15 min) das der adapter einen Fehler hatte und sich verschluckt ?

[Kampfratte]

das ist der komplette Log. Der Error ist jeweils das beenden des Adapters per pkill io.corona. Somit wurde zu dem Zeitpunkt des Errors der Adapter nicht ordnungsgemäß beendet. Hab das per Java eingestellt, dass 5 minuten nach ausführen des Adapter dieser gekillt wird, sollte er sich nicht ordnungsgemäß beenden.

[Dutchman]

@Kampfratte sagte in Test Coronavirus Statistics for ioBroker:

Hab das per Java eingestellt, dass 5 minuten nach ausführen des Adapter dieser gekillt wird, sollte er sich nicht ordnungsgemäß beenden.

hmm kein Hinweis woran es liegen koennte, mist....

[Kampfratte]

@Dutchman das ist es ja, was mich auch schon seit Tagen verwundert. :(

[Dutchman]

@Kampfratte sagte in Test Coronavirus Statistics for ioBroker:

@Dutchman das ist es ja, was mich auch schon seit Tagen verwundert. :(

einzige was mir jetzt einfallen wuerde ist adapter auf debug, mitlaufen lassen und dan wen es schiefgeht log des letzten raus analysieren

[Kampfratte]

@Dutchman hab ich nun mal gemacht. Log auf debug und Java fürs Killen aus. Mal sehen, was passiert.

[Dutchman]

@Kampfratte sagte in Test Coronavirus Statistics for ioBroker:

@Dutchman hab ich nun mal gemacht. Log auf debug und Java fürs Killen aus. Mal sehen, was passiert.

danke dir fuer deine mithilfe bin wirklich gespannt

[Kampfratte]

@Dutchman es ist soweit. Er blieb mal wieder hängen. Die letzten Zeilen aus dem Log lauten:

2020-04-30 14:45:28.982  - debug: coronavirus-statistics.0 (1087) Data \"Shape__Length\" from API ignored having values : 2048279.98573376
2020-04-30 14:45:28.982  - debug: coronavirus-statistics.0 (1087) Getting data for Federal State : "Sachsen-Anhalt"
2020-04-30 14:45:28.982  - debug: coronavirus-statistics.0 (1087) Data \"OBJECTID_1\" from API ignored having values : 15
2020-04-30 14:45:28.982  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_AGS\" from API ignored having values : 15
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_GEN\" from API ignored having values : Sachsen-Anhalt
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_BEZ\" from API ignored having values : Land
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_EWZ\" from API ignored having values : 2208321
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"OBJECTID\" from API ignored having values : 14
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"AGS_TXT\" from API ignored having values : 15
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"GlobalID\" from API ignored having values : 66106bbe-f04b-4f92-80e1-5b5b30da25b5
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"faelle_100000_EW\" from API ignored having values : 70.1437879728536
2020-04-30 14:45:28.983  - debug: coronavirus-statistics.0 (1087) Data \"Shape__Area\" from API ignored having values : 54177007537.6553
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"Shape__Length\" from API ignored having values : 1920386.52842308
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Getting data for Federal State : "Thüringen"
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"OBJECTID_1\" from API ignored having values : 16
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_AGS\" from API ignored having values : 16
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_GEN\" from API ignored having values : Thüringen
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_BEZ\" from API ignored having values : Freistaat
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"LAN_ew_EWZ\" from API ignored having values : 2143145
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"OBJECTID\" from API ignored having values : 16
2020-04-30 14:45:28.984  - debug: coronavirus-statistics.0 (1087) Data \"AGS_TXT\" from API ignored having values : 16
2020-04-30 14:45:28.985  - debug: coronavirus-statistics.0 (1087) Data \"GlobalID\" from API ignored having values : 3a3e2817-bb19-4f8c-8bca-d8ff591140d4
2020-04-30 14:45:28.985  - debug: coronavirus-statistics.0 (1087) Data \"faelle_100000_EW\" from API ignored having values : 105.172538488996
2020-04-30 14:45:28.985  - debug: coronavirus-statistics.0 (1087) Data \"Shape__Area\" from API ignored having values : 40685205073.9761
2020-04-30 14:45:28.985  - debug: coronavirus-statistics.0 (1087) Data \"Shape__Length\" from API ignored having values : 2015719.49965031
2020-04-30 14:45:28.985  - debug: coronavirus-statistics.0 (1087) allGermanyFederalStates : ["Baden-Württemberg","Bayern","Berlin","Brandenburg","Bremen","Hamburg","Hessen","Mecklenburg-Vorpommern","Niedersachsen","Nordrhein-Westfalen","Rheinland-Pfalz","Saarland","Sachsen","Sachsen-Anhalt","Schleswig-Holstein","Thüringen"]
2020-04-30 14:48:08.441  - info: sql.0 (186) enabled logging of vis.0.iPad_7.battery.level, Alias=false
2020-04-30 15:00:00.004  - warn: host.iobroker instance system.adapter.coronavirus-statistics.0 already running with pid 1087
2020-04-30 15:06:49.281  - info: sql.0 (186) enabled logging of vis.0.iPad_7.battery.level, Alias=false
2020-04-30 15:15:00.007  - warn: host.iobroker instance system.adapter.coronavirus-statistics.0 already running with pid 1087

Bei den Bundesländern bleibt er hängen.

[jackblackson]

Hallo! Ich hatte seit zwei Tagen das Problem, das der Adapter nach einem Neustart des RaspPi scheinbar nicht mehr richtig funktioniert hat, meinte, er läuft bereits. Hab nun den RaspPi neu gestartet, nun passt es wieder. Nun schauen aber leider meine Diagramme so aus:

Grund sind diese History-Daten:

Hat jemand eine Idee, ob ich da entweder die 0-Werte im Flot ignorieren kann, oder ob ich dem History-Adapter in der Zukunft sagen kann, keine null-Werte zu erstellen?

[Knallochse]

@Dutchman Habe seit heute leider Fehler im Log

coronavirus-statistics.0	2020-05-14 14:45:29.331	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":415,"GEN":"Berlin Tempelhof-Schöneberg","BEZ":"Bezirk","death_rate":3.24074074074074,"cases":648,"deaths":21,"cases_per_100k":184.27
coronavirus-statistics.0	2020-05-14 14:45:29.327	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":414,"GEN":"Berlin Friedrichshain-Kreuzberg","BEZ":"Bezirk","death_rate":1.02459016393443,"cases":488,"deaths":5,"cases_per_100k":168
coronavirus-statistics.0	2020-05-14 14:45:29.323	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":413,"GEN":"Berlin Mitte","BEZ":"Bezirk","death_rate":1.19176598049837,"cases":923,"deaths":11,"cases_per_100k":240.256968232979,"cas
coronavirus-statistics.0	2020-05-14 14:45:29.319	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":412,"GEN":"Berlin Steglitz-Zehlendorf","BEZ":"Bezirk","death_rate":2.30326295585413,"cases":521,"deaths":12,"cases_per_100k":168.773
coronavirus-statistics.0	2020-05-14 14:45:29.314	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":411,"GEN":"Berlin Spandau","BEZ":"Bezirk","death_rate":2.29007633587786,"cases":262,"deaths":6,"cases_per_100k":107.387171741599,"ca
coronavirus-statistics.0	2020-05-14 14:45:29.310	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":410,"GEN":"Berlin Marzahn-Hellersdorf","BEZ":"Bezirk","death_rate":0.595238095238095,"cases":336,"deaths":2,"cases_per_100k":125.117
coronavirus-statistics.0	2020-05-14 14:45:29.306	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":409,"GEN":"Berlin Lichtenberg","BEZ":"Bezirk","death_rate":3.2967032967033,"cases":273,"deaths":9,"cases_per_100k":93.6689403400903,
coronavirus-statistics.0	2020-05-14 14:45:29.302	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":408,"GEN":"Berlin Neukölln","BEZ":"Bezirk","death_rate":4.29184549356223,"cases":699,"deaths":30,"cases_per_100k":212.016706552499,"
coronavirus-statistics.0	2020-05-14 14:45:29.297	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":407,"GEN":"Berlin Pankow","BEZ":"Bezirk","death_rate":3.81679389312977,"cases":655,"deaths":25,"cases_per_100k":160.631736416809,"ca
coronavirus-statistics.0	2020-05-14 14:45:29.291	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":406,"GEN":"Berlin Treptow-Köpenick","BEZ":"Bezirk","death_rate":2.6865671641791,"cases":335,"deaths":9,"cases_per_100k":123.54648482
coronavirus-statistics.0	2020-05-14 14:45:29.286	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":405,"GEN":"Berlin Charlottenburg-Wilmersdorf","BEZ":"Bezirk","death_rate":3.05555555555556,"cases":720,"deaths":22,"cases_per_100k":
coronavirus-statistics.0	2020-05-14 14:45:29.281	error	(2178) Unknown Bezirk received containing {"attributes":{"OBJECTID":404,"GEN":"Berlin Reinickendorf","BEZ":"Bezirk","death_rate":4.35684647302905,"cases":482,"deaths":21,"cases_per_100k":181.732491280

[Kampfratte]

@Knallochse Fehler habe ich gefunden und per Pull Request an @Dutchman weiter geleitet.

[Knallochse]

@Kampfratte Große Klasse und vielen Dank 👍

[varg]

habe auch einige meldungen im log

coronavirus-statistics.0	2020-05-16 11:03:05.518	warn	(3795) State attribute definition missing for + criticalPerOneMillion
coronavirus-statistics.0	2020-05-16 11:03:05.510	warn	(3795) State attribute definition missing for + recoveredPerOneMillion
coronavirus-statistics.0	2020-05-16 11:03:05.503	warn	(3795) State attribute definition missing for + activePerOneMillion
coronavirus-statistics.0	2020-05-16 11:03:05.495	warn	(3795) State attribute definition missing for + population

[Kampfratte]

@varg liegt @Dutchman auch in der selben Pull Request vor.

[Webranger]

Kommen bei euch noch aktuelle Daten an?

Hab bis jetzt für Heute null neu infizierte!?

Gruss

[Kampfratte]

@Webranger jupp, ich hab bei Deutschland heute 98 neuinfizierte. Stand 16:00 Uhr.

[Webranger]

Komisch .......

Danke

[Webranger]

Hab immer noch diese Fehler im log

Spoiler

coronavirus-statistics.0	2020-05-25 19:00:54.708	info	(15619) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
coronavirus-statistics.0	2020-05-25 19:00:54.285	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":415,"GEN":"Berlin Tempelhof-Schöneberg","BEZ":"Bezirk","death_rate":3.6036036036036,"cases":666,"deaths":24,"cases_per_100k":189.3
coronavirus-statistics.0	2020-05-25 19:00:54.284	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":414,"GEN":"Berlin Friedrichshain-Kreuzberg","BEZ":"Bezirk","death_rate":1.15830115830116,"cases":518,"deaths":6,"cases_per_100k":1
coronavirus-statistics.0	2020-05-25 19:00:54.275	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":413,"GEN":"Berlin Mitte","BEZ":"Bezirk","death_rate":1.2565445026178,"cases":955,"deaths":12,"cases_per_100k":248.586570598586,"ca
coronavirus-statistics.0	2020-05-25 19:00:54.274	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":412,"GEN":"Berlin Steglitz-Zehlendorf","BEZ":"Bezirk","death_rate":2.41187384044527,"cases":539,"deaths":13,"cases_per_100k":174.6
coronavirus-statistics.0	2020-05-25 19:00:54.273	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":411,"GEN":"Berlin Spandau","BEZ":"Bezirk","death_rate":2.66666666666667,"cases":300,"deaths":8,"cases_per_100k":122.962410391143,"
coronavirus-statistics.0	2020-05-25 19:00:54.272	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":410,"GEN":"Berlin Marzahn-Hellersdorf","BEZ":"Bezirk","death_rate":0.84985835694051,"cases":353,"deaths":3,"cases_per_100k":131.44
coronavirus-statistics.0	2020-05-25 19:00:54.261	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":409,"GEN":"Berlin Lichtenberg","BEZ":"Bezirk","death_rate":3.44827586206897,"cases":290,"deaths":10,"cases_per_100k":99.5018047568
coronavirus-statistics.0	2020-05-25 19:00:54.260	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":408,"GEN":"Berlin Neukölln","BEZ":"Bezirk","death_rate":4.32432432432432,"cases":740,"deaths":32,"cases_per_100k":224.452593489055
coronavirus-statistics.0	2020-05-25 19:00:54.255	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":407,"GEN":"Berlin Pankow","BEZ":"Bezirk","death_rate":4.14285714285714,"cases":700,"deaths":29,"cases_per_100k":171.667504567582,"
coronavirus-statistics.0	2020-05-25 19:00:54.254	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":406,"GEN":"Berlin Treptow-Köpenick","BEZ":"Bezirk","death_rate":2.89855072463768,"cases":345,"deaths":10,"cases_per_100k":127.2344
coronavirus-statistics.0	2020-05-25 19:00:54.253	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":405,"GEN":"Berlin Charlottenburg-Wilmersdorf","BEZ":"Bezirk","death_rate":2.97297297297297,"cases":740,"deaths":22,"cases_per_100k
coronavirus-statistics.0	2020-05-25 19:00:54.241	error	(15619) Unknown Bezirk received containing {"attributes":{"OBJECTID":404,"GEN":"Berlin Reinickendorf","BEZ":"Bezirk","death_rate":4.43548387096774,"cases":496,"deaths":22,"cases_per_100k":187.0110283

und diese:

Spoiler

coronavirus-statistics.0	2020-05-25 19:00:28.066	warn	(15619) State attribute definition missing for + criticalPerOneMillion
coronavirus-statistics.0	2020-05-25 19:00:27.834	warn	(15619) State attribute definition missing for + recoveredPerOneMillion
coronavirus-statistics.0	2020-05-25 19:00:27.497	warn	(15619) State attribute definition missing for + activePerOneMillion
coronavirus-statistics.0	2020-05-25 19:00:27.282	warn	(15619) State attribute definition missing for + population

Hab ich was überlesen was ich machen muss und gibt es da schon eine Lösung?

Gruss

[crunchip]

@Webranger habs manuell geändert
https://github.com/iobroker-community-adapters/ioBroker.coronavirus-statistics/pull/52

[Kampfratte]

@Webranger der Pull Request liegt Dutchman schon seit geraumer Zeit vor.

Bis er es integriert hat, kannst du den Adapter incl. des Pull requests auch von meinem Fork installieren

https://github.com/Kampfratte/ioBroker.coronavirus-statistics

Lg