[gelöst] Adapterinstallation - node gyp error

sigi234

Was sagt :
node -v
npm -v
iobroker list instances

Sundance

Hier die drei Ausgaben:

pi@HOME:~ $ node -v
v10.16.2

pi@HOME:~ $ npm -v
6.9.0

pi@HOME:~ $ iobroker list instances
+ system.adapter.admin.0                 : admin       -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.cloud.0                 : cloud       - disabled
+ system.adapter.discovery.0             : discovery   -  enabled
  system.adapter.ham.0                   : ham         -  enabled
+ system.adapter.history.0               : history     -  enabled
+ system.adapter.hm-rega.0               : hm-rega     -  enabled
+ system.adapter.hm-rpc.0                : hm-rpc      -  enabled, port: 0
+ system.adapter.hm-rpc.1                : hm-rpc      -  enabled, port: 0
+ system.adapter.hue.0                   : hue         -  enabled, port: 80
  system.adapter.info.0                  : info        -  enabled
  system.adapter.iot.0                   : iot         - disabled
+ system.adapter.javascript.0            : javascript  -  enabled
  system.adapter.mobile.0                : mobile      - disabled
  system.adapter.node-red.0              : node-red    -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.sayit.0                 : sayit       -  enabled, port: 0
  system.adapter.sonos.0                 : sonos       -  enabled
  system.adapter.tr-064.0                : tr-064      -  enabled
+ system.adapter.web.0                   : web         -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.web.1                   : web         -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                : zigbee      -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019366630-if00

+ instance is alive

sigi234

@Sundance

Das passt Alles, ioBroker neu starten......

Sundance

@sigi234 Habe ich gemacht - Installation nochmal versucht, gleiche Fehler wie vorher.. Gibt es noch etwas, was ich versuchen kann?

Danke vorab für deine Hilfe!

sigi234

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

gleiche Fehler wie vorher

Was für welcher ? Was geht nicht, bzw. funktioniert nicht?
In den Admin kommst du normal rein?

Sundance

@sigi234

Hier der aktuelle Fehler-output aus dem Terminal:

pi@HOME:~ $ iobroker install iobroker.roomba
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp WARN Using request for node-pre-gyp https download 
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz 
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
../src/bmp/BMPParser.cc: In member function 'void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)':
../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/CanvasRenderingContext2d.cc: In static member function 'static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)':
../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Error 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 
node-pre-gyp ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.57-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
npm WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T12_17_48_762Z-debug.log
host.HOME Adapter directory "null" does not exists
Cannot parse null/io-package.json:Error: ENOENT: no such file or directory, open 'null/io-package.json'

In Admin komme ich normal rein, dort funktioniert auch alles wunderbar - allerdings hatte die Installation über Admin nie geklappt, daher habe ich es nun immer über die Konsole probiert. Leider bisher ohne Erfolg..

Habe es hier zwar als user "Pi" installiert - per root kommen aber die gleichen fehler.

sigi234

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

sudo npm install canvas --unsafe-perm=true

Sundance

@sigi234 said in Adapterinstallation schlägt fehl - node-gyp Fehler:

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

Das hatte ich vorhin auch schonmal probiert, schlägt leider immernoch fehl.. hier die beiden outputs:

pi@HOME:~ $ sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev
Reading package lists... Done
Building dependency tree       
Reading state information... Done
build-essential is already the newest version (12.3).
libgif-dev is already the newest version (5.1.4-0.4).
libjpeg-dev is already the newest version (1:1.5.1-2).
libpango1.0-dev is already the newest version (1.40.5-1).
librsvg2-dev is already the newest version (2.40.16-1).
libcairo2-dev is already the newest version (1.14.8-1+rpi1).
0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.

Und bei canvas:

pi@HOME:~ $ sudo npm install canvas --unsafe-perm=true

> canvas@2.5.0 install /home/pi/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download 
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz 
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
make: Entering directory '/home/pi/node_modules/canvas/build'
  SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node
  COPY Release/canvas-postbuild.node
  CXX(target) Release/obj.target/canvas/src/backend/Backend.o
  CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o
  CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o
../src/bmp/BMPParser.cc: In member function 'void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)':
../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
  CXX(target) Release/obj.target/canvas/src/Backends.o
  CXX(target) Release/obj.target/canvas/src/Canvas.o
  CXX(target) Release/obj.target/canvas/src/CanvasGradient.o
  CXX(target) Release/obj.target/canvas/src/CanvasPattern.o
  CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o
../src/CanvasRenderingContext2d.cc: In static member function 'static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)':
../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
canvas.target.mk:138: recipe for target 'Release/obj.target/canvas/src/CanvasRenderingContext2d.o' failed
make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Error 1
make: Leaving directory '/home/pi/node_modules/canvas/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/home/pi/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/home/pi/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /home/pi/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 
node-pre-gyp ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/home/pi/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/home/pi/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/home/pi/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.57-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/home/pi/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /home/pi/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/home/pi/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/home/pi/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm WARN pi No description
npm WARN pi No repository field.
npm WARN pi No README data
npm WARN pi No license field.

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-08-08T12_31_14_478Z-debug.log

sigi234

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

@sigi234 said in Adapterinstallation schlägt fehl - node-gyp Fehler:

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

Das hatte ich vorhin auch schonmal probiert, schlägt leider immernoch fehl.. hier die beiden outputs:

Kommt das gleiche wenn du es über den Admin installierst?

Gerade bei mir mal installiert:

Screenshot (3837).png

Sundance

@sigi234 Jap, das gleiche Spiel.. host.HOME cannot install roomba:

$ ./iobroker add roomba  --host HOME
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp
 
WARN Using request for node-pre-gyp https download 
node-pre-gyp
 WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz node-pre-gyp WARN 
Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/CanvasRenderingContext2d.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)’:../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded ‘abs(double&)’ is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^

In file included from /usr/include/c++/6/cstdlib:75:0,                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded ‘abs(double&)’ is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^

In file included from /usr/include/c++/6/cstdlib:75:0,                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~

make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Fehler 1
gyp
 ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)

gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 

node-pre-gyp ERR! build error 
node-pre-gyp
 ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)

node-pre-gyp ERR! System Linux 4.19.57-v7+node-pre-gyp 
ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp
 ERR! not ok 
npm
 
WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm
 
WARN
 optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.


npm
 ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T12_39_29_830Z-debug.log

host.HOME install adapter roomba
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp
 
WARN Using request for node-pre-gyp https download 
node-pre-gyp
 WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz node-pre-gyp
 WARN 
Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/CanvasRenderingContext2d.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)’:../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded ‘abs(double&)’ is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^

In file included from /usr/include/c++/6/cstdlib:75:0,                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~

In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~

/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)   abs(long __i) { return __builtin_labs(__i); }
   ^~~

../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded ‘abs(double&)’ is ambiguous   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~

make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Fehler 1
gyp ERR! 
build error 
gyp
 ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! 
stack     at ChildProcess.emit (events.js:198:13)gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)

gyp ERR! System Linux 4.19.57-v7+gyp
 ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp 
ERR! node-gyp -v v3.8.0gyp ERR! not ok 

node-pre-gyp
 ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp
 ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)

node-pre-gyp
 ERR! System Linux 4.19.57-v7+node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"

node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvasnode-pre-gyp ERR! node -v v10.16.2

node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
npm
 WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup
 SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm
 ERR! code ELIFECYCLE
npm
 
ERR! 
errno
 1npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T12_41_18_181Z-debug.log

host.HOME install adapter roomba
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp
 WARN Using request for node-pre-gyp https download 
node-pre-gyp
 WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 

../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~

../src/CanvasRenderingContext2d.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)’:../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded ‘abs(double&)’ is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^

In file included from /usr/include/c++/6/cstdlib:75:0,                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~

/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)   abs(long __i) { return __builtin_labs(__i); }
   ^~~

../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded ‘abs(double&)’ is ambiguous   double current_scale_y = abs(transforms[2]);
                                             ^

In file included from /usr/include/c++/6/cstdlib:75:0,                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~

make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Fehler 1
gyp
 
ERR!
 
build error 
gyp
 ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! 
stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)gyp
 ERR! System Linux 4.19.57-v7+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"

gyp ERR! cwd /opt/iobroker/node_modules/canvasgyp ERR! node -v v10.16.2
gyp ERR!
 node-gyp -v v3.8.0gyp ERR! not ok 

node-pre-gyp
 ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)

node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)

node-pre-gyp
 ERR! System Linux 4.19.57-v7+node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"

node-pre-gyp ERR! 
cwd /opt/iobroker/node_modules/canvasnode-pre-gyp ERR! node -v v10.16.2

node-pre-gyp ERR! node-pre-gyp -v v0.11.0node-pre-gyp ERR! not ok 

npm
 WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm
 
WARN
 
optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):
npm
 
WARN
 
notsup
 SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm
 
ERR! code ELIFECYCLE
npm 
ERR! errno
 1
npm
 ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`npm ERR! Exit status 1

npm ERR!
 npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR!
 This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T12_43_10_893Z-debug.log

host.HOME install adapter roomba
ERROR: host.HOME Cannot install roomba
ERROR: process exited with code 13

Ralla66

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz

Error 404 wundert mich.
Finde nur die Version 2.6.0.
https://github.com/node-gfx/node-canvas-prebuilt/releases
Falscher Link ?

Sundance

@Ralla66 Stimmt.. der Link hier müsste es wohl sein laut repo:

https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz

Da ist im link ein "ARM" zu viel.. aber passt die Version dann überhaupt noch? Was müsste ich anpassen, damit ich es installieren kann?

Ralla66

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz

Der Link geht ja, versuch über die URL zu installieren.

Sundance

@Ralla66 das scheint nicht zu klappen:

$ ./iobroker url "https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz" --debug
install https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz
npm install https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz --production --save --prefix "/opt/iobroker" (System call)
npm
 ERR! code ENOPACKAGEJSON
npm
 
ERR!
 
package.json Non-registry package missing package.json: https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-x64.tar.gz.npm
 ERR! package.json
 npm can't find a package.json file in your current directory.

npm
 ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T13_53_17_665Z-debug.log
process exited with code 0

Ralla66

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

npm can't find a package.json file in your current directory.

Da kann ich nicht mehr weiter helfen.
Dir scheint ein package.json file zu fehlen oder liegt im falschen directory.

Sundance

@Ralla66 - okay, dann gebe ich mich erstmal geschlagen! Danke trotzdem für deine Hilfe!

Zefau

Installier mal canvas 2.6

Sundance

@Zefau - danke für den hinweis. hast du einen Tipp wo und wie genau ich das installieren soll? Der Fehler mit "package.json" kommt leider auch bei dem entsprechendem Link von der 2.6 Version..

Ich habe als root einfach folgendes gemacht:

npm install https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.0/canvas-v2.6.0-node-v64-linux-glibc-x64.tar.gz

Aber der Fehler mit dem package.json bleibt:

root@HOME:/home/pi# npm install https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.0/canvas-v2.6.0-node-v64-linux-glibc-x64.tar.gz
npm ERR! code ENOPACKAGEJSON
npm ERR! package.json Non-registry package missing package.json: https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.0/canvas-v2.6.0-node-v64-linux-glibc-x64.tar.gz.
npm ERR! package.json npm can't find a package.json file in your current directory.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-08-08T16_25_34_957Z-debug.log

Hast du einen Tipp?

Zefau

Sorry, war noch unterwegs, daher die knappe Antwort.

Hast du die build-essentials installiert?

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

Danach dann einfach canvas 2.6.0 von npm:

sudo npm install canvas@2.6.0 --unsafe-perm=true

EDIT: den zweiten Befehl im iobroker.roomba Ordner ausführen. Also unter /opt/iobroker/node_modules/iobroker.roomba.

EDIT2: Hab jetzt den Verlauf nicht komplett gelesen, aber die fehlende package.json liegt daran, dass du in einem völlig falschen Ordner bist (/home/pi?). Die Befehle müssen im iobroker.roomba Ordner ausgeführt werden, wenn diese dafür greifen sollen.

Sundance

@Zefau kein Problem, danke für deine Unterstützung.

Auch die Installtion von 2.6.0 schlägt fehl (404), allerdings scheint das Problem in einem falschen Link in dem package zu liegen. Habe diese Issue hier gefunden: https://github.com/node-gfx/node-canvas-prebuilt/issues/84

Dann muss man aktuell wohl warten, bis das seitens der entwickler von node-canvas behoben ist, wenn ich das richtig verstehe?

Community Forum

NEWS

[gelöst] Adapterinstallation - node gyp error

Support us

366

32.5k

81.6k

1.3m