Neue Installationsroutine (für Linux)
-
Na ja, Linux Systeme sollten sich schon gleich verhalten, tun sie aber meistens nicht wirklich. Viele Distributionen nehmen Debian als Basis, verändern aber schon auch einiges in der Administration und in der Bereitstellung von Paketen.
Auch die Verwendung von Verzeichnissen, sudo, etc. ist teilweise recht eigenwillig gelöst. Man kann sicher nicht alles abdecken. Vielleicht wäre statt eines Skripts für alles (wer könnte / wollte das pflegen ? ) einfach eine Prüfung hilfreich, die bei Erkennen eines nicht-Debian Systems eine Nachricht mit Hinweis auf die Anforderungen und Tipps für händisches Einrichten ausgibt und dann abbricht.
Ich persönlich setzte am Liebsten ARCH Linux ein (auch auf SBC) weil es keine Release-Wechsel kennt und sich weitestgehend an allgemein akzeptierte Regeln hält.
Wenn man nur auf uname testet, läuft das Skript auf jedem Linux-Dialekt und bringt möglicherweise mehr Nacharbeit ins Spiel als der ungeübte Nutzer (sind wohl eh die meisten, ich schließe mich da nicht aus) verkraften kann oder will.
-
Ich habe nach meiner letzten Mitteilung noch ein wenig mit Docker gespielt. Möglicherweise wäre das auch eine Alternative: Ein erwiesen lauffähiges Docker-Image zur Verfügung zu stellen. Offenbar habt Ihr damit schon gearbeitet, sonst wäre die Variante ja nicht im Installations-Skript enthalten.
Man könnte sicherstellen, daß alle Vorbedingungen erfüllt sind, wäre die Abhängigkeit von Plattformen, System- und Paketupdates los, und könnte bei der Fehlersuche - natürlich wäre auch das Docker-Image fehlerbehaft
- von einer gegebenen Umgebung ausgehen.P.S. wofür wird eigentlich unix-dgram gebraucht ? Lohnt es sich in diesen Installationsfehler Energie zu investieren ?
-
@mimue sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
P.S. wofür wird eigentlich unix-dgram gebraucht ? Lohnt es sich in diesen Installationsfehler Energie zu investieren ?
Wird für syslog logging gebraucht. Die js-Controller 1.5.13 die bald kommt hat das gelöst. Also keine Energie reinstecken
-
@mimue sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Ein erwiesen lauffähiges Docker-Image zur Verfügung zu stellen.
Es gibt einige Leute, die das Docker-Image von buanet im Einsatz haben, das auch auf dem Installer basiert.
-
Hallo zusammen,
ich hab da auch ein Problemchen. Ich habe mir in einer VM das neueste Debian 10 Buster ohne GUI installiert (https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.0.0-amd64-netinst.iso). Curl, node, npm, ioBroker installiert. Aber ioBroker läuft nicht, läßt sich nicht starten.Den Fixer hab ich auch schon mal vorsichtshalber drübergebügelt.
Wo könnte denn hier der Fehler liegen? Bin auch nicht so der Linuxfachmann ... die neuen Befehle machen mich noch kirre ...
...
Mein eigentliches System läuft super, is noch Debian 9, aber man soll ja nach vorne schaun.
Andi -
@1Topf sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Den Fixer hab ich auch schon mal vorsichtshalber drübergebügelt.
Und warum dan
@1Topf sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
systemctl start iobroker
Was passiert bei
iobroker start? -
@1Topf sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Failed to start iobroker.service: The name org.freedesktop.PolicyKit1 was not provided by any .service files
Lässt mich vermuten, dass die Installation nicht sauber durchgelaufen ist. Hilfreich wäre hier ein Log der Installation.
Was steht in
/opt/iobroker/INSTALLER_INFO.txt? -
@Homoran sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
@1Topf sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
systemctl start iobroker
Hab ich gemacht, weil ioBroker nicht startet.
Was passiert bei
iobroker start?Nix.
@AlCalzone sagte in [Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme)
Lässt mich vermuten, dass die Installation nicht sauber durchgelaufen ist. Hilfreich wäre hier ein Log der Installation.
Was steht in
/opt/iobroker/INSTALLER_INFO.txt?Installer version: 2019-07-03
Installation date 2019-07-13
Platform: linux
Installed as root
init system: systemd
Autostart: systemd
ACL enabled: false
Fixer version: 2019-07-03
Fix date 2019-07-13
ACL enabled: false
init system: systemd
Autostart: systemdWenn ich Zeit hab, setz ich nochmal ein neues System auf. Wie gesagt, war nur mal zum probieren des neuen Debian mit ioB. Wenn ihr aber ne Idee habt, wie man es trotzdem zum laufen kriegt, probier ichs aus.
-
@1Topf sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Wenn ich Zeit hab, setz ich nochmal ein neues System auf.
Dann schick mir anschließend bitte die Ausgabe bei der Installation. Vermutlich gab es einen Fehler der nicht aufgefallen ist.
-
So. Hab mir jetzt vorsichtshalber noch das neueste VirtualBox installiert, um da einen Fehler auszuschließen. Dann wie gehabt Debian 10, Curl, Node, ioBroker.
Zuerst hab ich ioB als normaler Nutzer installiert mit folgendem Ergebnis:
Es gab dann keinen iobroker-Ordner in opt. Also als Root eingeloggt und einfach nochmal drübergebügelt mit folgendem Ergebnis:Jetzt gibt es den Ordner /opt/iobroker, aber im Browser kann ich immer noch nix aufrufen:
Und INSTALLER_INFO.txt sagt:
Installer version: 2019-07-03
Installation date 2019-07-15
Platform: linux
Installed as root
init system: systemd
Autostart: systemd
ACL enabled: falseHab jetzt erstmal keine Lust mehr.
-
Ich glaube du hast das gleiche Problem wie in einen anderen Thread von heute das in Debian 10 ein normaler User das Verzeichnis /usr/sbin nicht im Pfad hat. Dort liegen aber Programme wie usermod, visudo und so.
Versuch mal:
sudo su -
Und dann den installer als root laufen lassen. Hat dort funktioniert
-
Hallo
Wollte eure Anleitung unter https://www.iobroker.net/#de/documentation/install/linux.md testen und habe Raspbian Buster Lite Image auf die SD gezogen und in den Raspberry PI 3 gesteckt. Dann der Anleitung gefolgt und Installation gestartet:
pi@iobroker:~ $ node -v v10.16.0 pi@iobroker:~ $ npm -v 6.9.0 pi@iobroker:~ $ curl -sL https://iobroker.net/install.sh | bash - ========================================================================== Welcome to the ioBroker installer! Installer version: 2019-07-03 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Installed acl Installed libavahi-compat-libdnssd-dev Installed libudev-dev Installed libpam0g-dev Installed git ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../src/main.cpp:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/main.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetDiskUsage(Nan::NAN_ METHOD_ARGS_TYPE)’: ../src/main.cpp:26:71: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8:: Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations] DiskUsage result = GetDiskUsage(*v8::String::Utf8Value(info[0])); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/main.cpp:3: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2892:28: note: declared here explicit Utf8Value(Local<v8::Value> obj)); ^~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../../nan/nan.h:54, from ../src/main.cpp:3: ../src/main.cpp: At global scope: /home/pi/.node-gyp/10.16.0/include/node/node.h:573:43: warning: cast between inc ompatible function types from ‘void (*)(v8::Handle<v8::Object>)’ {aka ‘void (*)( v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local <v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.node-gyp/10.16.0/include/node/node.h:607:3: note: in expansion of macr o ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/main.cpp:3: /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::Pers istentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakC allbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallba ckInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.node-gyp/10.16.0/include/node/node_object_wrap.h:84:78: required fro m here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between inco mpatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {a ka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::Pers istentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakC allbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbac kInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between inco mpatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ { aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../node_modules/nan/nan.h:190, from ../src/unix_dgram.cc:5: ../node_modules/nan/nan_maybe_43_inl.h: In function ‘Nan::Maybe<bool> Nan::Force Set(v8::Local<v8::Object>, v8::Local<v8::Value>, v8::Local<v8::Value>, v8::Prope rtyAttribute)’: ../node_modules/nan/nan_maybe_43_inl.h:88:15: error: ‘class v8::Object’ has no m ember named ‘ForceSet’ return obj->ForceSet(GetCurrentContext(), key, value, attribs); ^~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v 8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’: ../node_modules/nan/nan.h:817:60: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local <v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated -declarations] v8::Isolate::GetCurrent(), target, func, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h:817:60: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local <v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated -declarations] v8::Isolate::GetCurrent(), target, func, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v 8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v8::Value>*)’: ../node_modules/nan/nan.h:831:62: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v 8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-d eclarations] v8::Isolate::GetCurrent(), target, symbol, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h:831:62: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::String>, int, v8::Local<v 8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-d eclarations] v8::Isolate::GetCurrent(), target, symbol, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:170:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h: In function ‘v8::Local<v8::Value> Nan::MakeCallback(v 8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’: ../node_modules/nan/nan.h:845:62: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>* )’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declaration s] v8::Isolate::GetCurrent(), target, method, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h:845:62: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, const char*, int, v8::Local<v8::Value>* )’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated-declaration s] v8::Isolate::GetCurrent(), target, method, argc, argv); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:163:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h: In member function ‘v8::Local<v8::Value> Nan::Callbac k::Call_(v8::Isolate*, v8::Local<v8::Object>, int, v8::Local<v8::Value>*) const’ : ../node_modules/nan/nan.h:1463:5: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local <v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated -declarations] )); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h:1463:5: warning: ‘v8::Local<v8::Value> node::MakeCallb ack(v8::Isolate*, v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local <v8::Value>*)’ is deprecated: Use MakeCallback(..., async_context) [-Wdeprecated -declarations] )); ^ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/node.h:177:50: note: declared here NODE_EXTERN v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/node.h:91:42: note: in definition of mac ro ‘NODE_DEPRECATED’ __attribute__((deprecated(message))) declarator ^~~~~~~~~~ In file included from ../src/unix_dgram.cc:5: ../node_modules/nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWor ker*)’: ../node_modules/nan/nan.h:1706:62: warning: cast between incompatible function t ypes from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_ cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Sock et(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:189:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] domain = info[0]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:190:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] type = info[1]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:191:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] protocol = info[2]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Bind (Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:230:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] fd = info[0]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:231:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Loca l<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations] String::Utf8Value path(info[1]); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2892:28: note: declared here explicit Utf8Value(Local<v8::Value> obj)); ^~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Send To(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:258:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] fd = info[0]->Int32Value(); ^ SCHNIPP SCHNAPPHab dann noch den Fixer ausgeführt und iobroker läuft. Also alles gut?
Gruß
LED -
@LED
Der Fixer war nicht nötig, da das alles schon bei einer Neuinstallation mit drin ist, schadet aber auch nicht -
@LED sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Hab dann noch den Fixer ausgeführt und iobroker läuft
Was ich nicht verstehe... Im Ankündigungspost zum Fixer steht:
Mittels einem Kommando wird eine bestehende Installation in /opt/iobroker auf den gleichen Stand gebracht wie eine aktuelle neue Installation.
Wie kommt man dann auf die Idee, diesen direkt nach einer nagelneuen Installation auszuführen? Ernst gemeinte Frage.
-
Hier noch der Rest
In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:259:27: warning: ‘v8::Local<v8::Object> v8::Value::ToObject () const’ is deprecated: Use maybe version [-Wdeprecated-declarations] buf = info[1]->ToObject(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/unix_dgram.cc:260:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] offset = info[2]->Uint32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2477:47: note: declared here V8_DEPRECATED("Use maybe version", uint32_t Uint32Value() const); ^~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:261:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] length = info[3]->Uint32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2477:47: note: declared here V8_DEPRECATED("Use maybe version", uint32_t Uint32Value() const); ^~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:262:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Loca l<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations] String::Utf8Value path(info[4]); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2892:28: note: declared here explicit Utf8Value(Local<v8::Value> obj)); ^~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Send (Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:302:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] fd = info[0]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:303:27: warning: ‘v8::Local<v8::Object> v8::Value::ToObject () const’ is deprecated: Use maybe version [-Wdeprecated-declarations] buf = info[1]->ToObject(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Conn ect(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:340:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] fd = info[0]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc:341:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Loca l<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations] String::Utf8Value path(info[1]); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2892:28: note: declared here explicit Utf8Value(Local<v8::Value> obj)); ^~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Clos e(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/unix_dgram.cc:361:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] fd = info[0]->Int32Value(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2478:46: note: declared here V8_DEPRECATED("Use maybe version", int32_t Int32Value() const); ^~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ In file included from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: ../src/unix_dgram.cc: At global scope: /home/pi/.node-gyp/10.16.0/include/node/node.h:573:43: warning: cast between inc ompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_ register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void* )’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.node-gyp/10.16.0/include/node/node.h:607:3: note: in expansion of macr o ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:420:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../node_modules/nan/nan.h:47, from ../src/unix_dgram.cc:5: /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::Pers istentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakC allbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallba ckInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.node-gyp/10.16.0/include/node/node_object_wrap.h:84:78: required fro m here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between inco mpatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {a ka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::Pers istentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakC allbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbac kInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../node_modules/nan/nan_object_wrap.h:66:61: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between inco mpatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ { aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] make: *** [unix_dgram.target.mk:99: Release/obj.target/unix_dgram/src/unix_dgram .o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_module s/node-gyp/lib/build.js:262:23) gyp ERR! stack at ChildProcess.emit (events.js:198:13) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_proces s.js:248:12) gyp ERR! System Linux 4.19.57-v7+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gy p/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/unix-dgram gyp ERR! node -v v10.16.0 gyp ERR! node-gyp -v v3.8.0 gyp ERR! not ok In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:41:49: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations] v8::String::Utf8Value path(info[0]->ToString()); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/v8.h:26, from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h:2892:28: note: declared here explicit Utf8Value(Local<v8::Value> obj)); ^~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:48:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’: ../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:113:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’: ../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’: ../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’: ../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:250:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations] v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h:10046:15: note: declared here Local<Object> Value::ToObject() const { ^~~~~ ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’: ../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’: ../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Handle<v8::Object>)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.node-gyp/10.16.0/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.node-gyp/10.16.0/include/node/node_object_wrap.h:84:78: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.node-gyp/10.16.0/include/node/node_object_wrap.h:84:78: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/poller.cpp: In static member function ‘static void Poller::onData(uv_poll_t*, int, int)’: ../src/poller.cpp:69:29: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] obj->callback.Call(2, argv); ^ In file included from ../src/poller.cpp:1: ../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ In file included from /home/pi/.node-gyp/10.16.0/include/node/node.h:63, from ../../nan/nan.h:54, from ../src/poller.cpp:1: /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.node-gyp/10.16.0/include/node/node_object_wrap.h:84:78: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.node-gyp/10.16.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.node-gyp/10.16.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] -
@AlCalzone said in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Wie kommt man dann auf die Idee, diesen direkt nach einer nagelneuen Installation auszuführen? Ernst gemeinte Frage.
Na ja, wenn etwas nicht klappt und es einen Fixer gibt
Hat aber wohl nicht geschadet... ich lerne noch. -
Hallo,
ich versuche gerade ioBroker auf einem Raspberry 4 mit Rasbian Buster zu installieren.
Hier in diesem Beitrag gibt es ja links zu neuen Installationsanleitungen/Scripten...
Leider kann ich keines diese Scripte nutzen, da die Links nicht funktionieren.
Kann mir jemand helfen und einen Link zu einer funktionierenden Installationsanleitung posten?
Danke
Thomas -
https://www.iobroker.net/#de/documentation/install/linux.md
Ich bin jetzt seit etwa 40h an dem Thema iobroker auf Raspberry dran und kann schon gar nicht mehr zählen wie oft ich auf tote Links geklickt habe. OK, ich bin auch ein totaler Linux Noob und hab immer nur Windows genutzt. Aber der Einstieg war schon echt schwer, obwohl es im Grunde so einfach sein könnte.
-
@LED sagte in Neue Installationsroutine und neue Anleitungen (für Linux-basierte Systeme):
Na ja, wenn etwas nicht klappt
Was denn? Lief ioBroker etwa nicht?
-
@TomsHome
Die toten Links kommen von der Neustrukturierung des Forum und sind in der Tat etwas nervig zumal die neue Doku die irgendwann mal alles zusammenfassen soll noch nicht fertig ist.
Im Grunde ist das wesentliche aber erreichbar und damit bekommt man ohne Probleme IOBroker installiert. Wie Rasbian auf dem Pi einzurichten ist, sollte eh nicht hier gesucht werden, sondern im entsprechenden Raspian Forum, da dort der Support eben darauf ausgelegt ist und hier der Schwerpunkt bei IOBroker liegt.Oder man nimmt eben ein fertiges Image von hier und spart sich die Raspian Einrichtung. Meine Empfehlung ist aber das ganze selber zu machen, da nur so das Grundverständnis für spätere eventuelle Probleme gesammelt wird (wenn nicht eh schon vorhanden).
