Weihnachtsangebot 2025! 🎄

[fisch]

Hallo habe heute folgende Updates gemacht:
Plattform: linux
RAM: 927.1 MB
Node.js: v10.16.0
NPM: 6.9.0

Leider habe ich nun einige Probleme...z.B. mit dem Zwave Adapter.
Kann mir da jemand weiterhelfen oder hat das auch mit dem o.g. Problem zu tun? Danke im Voraus!!

host.ioBroker-Pi	2019-06-19 17:00:51.175	error	instance system.adapter.zwave.0 terminated with code 0 (OK)
host.ioBroker-Pi	2019-06-19 17:00:51.175	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3) code: 'MODULE_NOT_FOUND' }
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:776:30)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/openzwave-shared/lib/openzwave-shared.js:25:19)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:690:17)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:562:25)
host.ioBroker-Pi	2019-06-19 17:00:51.174	error	Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:636:15)
host.ioBroker-Pi	2019-06-19 17:00:51.173	error	Caught by controller[0]: { Error: Cannot find module '/opt/iobroker/node_modules/openzwave-shared/lib/../build/Release/openzwave_shared.node'
zwave.0	2019-06-19 17:00:51.123	error	uncaught exception: Cannot find module '/opt/iobroker/node_modules/openzwave-shared/lib/../build/Release/openzwave_shared.node'
zwave.0	2019-06-19 17:00:46.604	info	starting. Version 1.4.1 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.16.0

[AlCalzone]

@fisch Da gab es wohl einen Fehler bei der Adapter-Installation. Versuche mal:

cd /opt/iobroker/node_modules/openzwave-shared
npm i --production

Sollte es bei letzterem Befehl Berechtigungsprobleme geben (EACCES), dann ändere ihn ab zu

sudo -H npm i --production --unsafe-perm

[fisch]

hey wow ! Super danke

Hat funktioniert Klasse!!

Darf ich doch noch Wehgen zwei anderen Sachen was fragen?

https://forum.iobroker.net/topic/23317/fehlermeldung-von-node-red

[OstfrieseUnterwegs]

Ist irgendwo dokumentiert, was sich seit 1.3.2 geändert hat?

[Bluelightcrew]

@OstfrieseUnterwegs
Die Frage hab ich mir auch gestellt, bei github hört es ja da auf, obwohl es wohl zwei neuere Versionen gibt. Hab die neuste drauf und sehe da jetzt kein unterschied.

[AlCalzone]

@OstfrieseUnterwegs https://github.com/ioBroker/ioBroker.zwave/blob/master/io-package.json#L18

Kurz gesagt:

• 1.3.x und alle früheren Versionen können aufgrund einer externen Änderung nicht mehr installiert werden.
• 1.4.0 hat daher die Installationsroutine geändert, und unter der Haube kleinere Verbesserungen
• 1.4.1 hat Fehler in 1.4.0 behoben
• 1.4.2 ersetzt wieder Leerzeichen in Objektnamen durch "_" wie es vor einem der letzten JS-Controller-Updates noch war.

[Matten]

@AlCalzone : Wurde mit dem 1.4 Update die Lib überschrieben? Ich hatte 1.5 installiert, nach dem Update funktionierten nicht mehr alle Funktionen der Jalousien (Auf-/Zuklappen).

Hat jemand schon die Lib Version 1.6 probiert?

Danke!

[AlCalzone]

@Matten Ja, die wurde auf Version 1.4 festgelegt, da nur die zum Zeitpunkt des Updates 100% kompatibel war. 1.5 könnte man allerdings mal testen.

1.6 könnte gegebenenfalls inzwischen auch funktionieren.

[Matten]

@AlCalzone Arbeitest Du an Deiner eigenen open zwave Version weiter?

[AlCalzone]

@Matten Ja, dauert aber noch etwas.

Zum Thema: habe gestern v1.5.0 veröffentlicht, die problemlos mit OpenZWave 1.6 zu funktionieren scheint.

[Matten]

@AlCalzone said in INFO / ACHTUNG : Zwave-Adapter:

@Matten Ja, dauert aber noch etwas.

Zum Thema: habe gestern v1.5.0 veröffentlicht, die problemlos mit OpenZWave 1.6 zu funktionieren scheint.

Danke, mal sehen ob ich noch weiß, wie ich die lib neu einspiele... :-)

[eumats]

@Matten
Wenn ich das richtig verstanden habe bringt der Adapter 1.5.0 OZW 1.6 gleich mit.

[Matten]

@eumats : Danke, leider habe ich das zu spät gemerkt und musste jetzt nochmal aufsetzen.

Leider habe ich jetzt einen ständigen Neustart:

host.debian 2019-07-11 13:37:51.689 error instance system.adapter.zwave.0 terminated with code null ()
host.debian 2019-07-11 13:37:51.688 warn instance system.adapter.zwave.0 terminated due to SIGSEGV
zwave.0 2019-07-11 13:37:43.111 info State updated: zwave.0.NODE18.SENSOR_MULTILEVEL.Power_1 = 0, index = 4, comClass = 49, instance = 1
history.0 2019-07-11 13:37:06.988 info enabled logging of zwave.0.NODE5.SENSOR_MULTILEVEL.Power_1, Alias=false
zwave.0 2019-07-11 13:37:06.989 info State updated: zwave.0.NODE5.SENSOR_MULTILEVEL.Power_1 = 158.6, index = 4, comClass = 49, instance = 1
history.0 2019-07-11 13:37:05.259 info enabled logging of zwave.0.NODE5.SENSOR_MULTILEVEL.Power_1, Alias=false
zwave.0 2019-07-11 13:37:05.335 info Update zwave.0.NODE47
zwave.0 2019-07-11 13:37:05.335 info Update zwave.0.NODE47
zwave.0 2019-07-11 13:37:05.335 info State updated: zwave.0.NODE45.CONFIGURATION.Load_control_mode = 0, index = 31, comClass = 112, instance = 1
zwave.0 2019-07-11 13:37:05.335 info State updated: zwave.0.NODE45.CONFIGURATION.Load_control_mode = control mode selected automatically (based on auto-calibration), index = 30, comClass = 112, instance = 1
zwave.0 2019-07-11 13:37:05.335 info State updated: zwave.0.NODE45.METER.Reset = false, index = 33, comClass = 50, instance = 2
zwave.0 2019-07-11 13:37:05.335 info State updated: zwave.0.NODE45.METER.Reset = false, index = 33, comClass = 50, instance = 1
zwave.0 2019-07-11 13:37:05.334 info Update zwave.0.NODE45
zwave.0 2019-07-11 13:37:05.334 info Update zwave.0.NODE45
zwave.0 2019-07-11 13:37:05.334 info State updated: zwave.0.NODE29.CONFIGURATION.Load_control_mode = 0, index = 31, comClass = 112, instance = 1
zwave.0 2019-07-11 13:37:05.334 info State updated: zwave.0.NODE29.CONFIGURATION.Load_control_mode = 5, index = 30, comClass = 112, instance = 1
zwave.0 2019-07-11 13:37:05.334 info Update zwave.0.NODE29

Das ist ein Auszug. Zwave startet und updatet alle nodes, dann bricht er ab und startet neu. Das seltsame ist, ich kann
die Geräte steuern, also bis dahin funktioniert alles. Das ist natürlich kein Zustand. Hat jemand eine Idee?

[AlCalzone]

@Matten sagte in INFO / ACHTUNG : Zwave-Adapter:

SIGSEGV

Klingt für mich als wäre beim Update was nicht sauber gelaufen. Am besten mal den Z-Wave-Adapter komplett löschen (nicht nur Instanzen) und neu installieren.

[Matten]

@AlCalzone Danke, das war es. :+1:

[fisch]

Hallo zusammen,

habe heute den 1.5.0 insatlliert...jetzt geht wieder nichts :-(

$ ./iobroker add zwave  --host ioBroker-Pi
host.ioBroker-Pi install adapter zwave
npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.zwave"
find: ‘/tmp/systemd-private-e840114d2b404515948665fe563358d5-redis-server.service-S60QFf’: Keine Berechtigungfind: ‘/tmp/systemd-private-e840114d2b404515948665fe563358d5-colord.service-o5xroB’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   125    0   125    0     0    362      0 --:--:-- --:--:-- --:--:--   363

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file master.zip: Keine Berechtigung

  0 12.5M    0  1370    0     0   1615      0  2:16:13 --:--:--  2:16:13 12685
curl: (23) Failed writing body (0 != 1370)

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: curl -L -O https://github.com/OpenZWave/open-zwave/archive/master.zip
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   125    0   125    0     0    362      0 --:--:-- --:--:-- --:--:--   363

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0Warning: Failed to create the file master.zip: Keine Berechtigung

  0 12.5M    0  1370    0     0   1615      0  2:16:13 --:--:--  2:16:13 12685
curl: (23) Failed writing body (0 != 1370)

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:147:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:776:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 
ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.5.0 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.5.0 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-07-12T13_49_56_096Z-debug.log

ERROR: fs.js:114    throw err;
    ^

Error: EACCES: permission denied, open '/opt/iobroker/node_modules/iobroker.zwave/iob_npm.done'
    at Object.openSync (fs.js:443:3)
    at Object.writeFileSync (fs.js:1194:35)
    at ChildProcess.child.on (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2946:20)
    at ChildProcess.emit (events.js:198:13)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)

ERROR: process exited with code 1

Kann mir jemand weiterhelfen?

habe schon iobroker del zwave gemacht und neuinstalliert... und dann über Admin eine neue Instanz installieren wollen

[fisch]

ok installiert habe ich ihn nun bekommen....

host.ioBroker-Pi	2019-07-12 16:51:28.841	error	instance system.adapter.zwave.0 terminated with code 0 (OK)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module._compile (internal/modules/cjs/loader.js:776:30)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/lib/openzwave-shared.js:27:19)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
Caught	2019-07-12 16:51:28.841	error	by controller[0]: at Module.require (internal/modules/cjs/loader.js:690:17)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
Caught	2019-07-12 16:51:28.840	error	by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:805:18)
Caught	2019-07-12 16:51:28.839	error	by controller[0]: Error: libopenzwave.so.1.6: cannot open shared object file: No such file or directory

EDIT: OK, ich habe wieder die 1.4.2 installiert...geht wieder?!
Mit der 1.5.0 gehts leider nicht!

[fisch]

Erledigt:

mit

sudo ldconfig

läuft es nun !°

[gery80]

Hallo versuche gerade zwave adapter zu installieren leider funktioniert es nicht image ist das neue ioBroker Image für Raspberry Pi2/3/4 Buster mit piVCCU 20190723 bitte um hilfe

$ ./iobroker add zwave  --host IOBroker
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    231      0 --:--:-- --:--:-- --:--:--   231

  0 1917k    0   733    0     0    698      0  0:46:53  0:00:01  0:46:52   698
 49 1917k   49  942k    0     0   426k      0  0:00:04  0:00:02  0:00:02  811k
100 1917k  100 1917k    0     0   830k      0  0:00:02  0:00:02 --:--:-- 1521k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    281      0 --:--:-- --:--:-- --:--:--   281

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 16081    0 16081    0     0  12958      0 --:--:--  0:00:01 --:--:-- 40506

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm 
ERR! Exit status 1npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.


npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_44_00_445Z-debug.log

host.IOBroker install adapter zwave
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    243      0 --:--:-- --:--:-- --:--:--   242

  1 1917k    1 39004    0     0  34486      0  0:00:56  0:00:01  0:00:55 34486
100 1917k  100 1917k    0     0   952k      0  0:00:02  0:00:02 --:--:-- 2131k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    280      0 --:--:-- --:--:-- --:--:--   280

100 16026    0 16026    0     0  13501      0 --:--:--  0:00:01 --:--:-- 13501
100 16081    0 16081    0     0  13536      0 --:--:--  0:00:01 --:--:-- 55000

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm
 WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm 
ERR! npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.


npm ERR! A complete log of this run can be found in:npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_47_05_108Z-debug.log

host.IOBroker install adapter zwave
NPM version: 6.9.0
npm install iobroker.zwave@1.4.2 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-systemd-timesyncd.service-fwIlBw’: Keine Berechtigungfind: ‘/tmp/pivccu-var/empty’: Keine Berechtigung
find: ‘/tmp/systemd-private-7f33173bc5a64f34b66e60d9b4e94fb9-redis-server.service-prEu7C’: Keine Berechtigung

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   122    0   122    0     0    223      0 --:--:-- --:--:-- --:--:--   223

  4 1917k    4 95062    0     0  64274      0  0:00:30  0:00:01  0:00:29 64274
 55 1917k   55 1065k    0     0   435k      0  0:00:04  0:00:02  0:00:02 1004k
100 1917k  100 1917k    0     0   626k      0  0:00:03  0:00:03 --:--:-- 1153k

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100   147    0   147    0     0    231      0 --:--:-- --:--:-- --:--:--   231

100 16081    0 16081    0     0  11502      0 --:--:--  0:00:01 --:--:-- 11502

/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:16    if (!suppressException) throw e;
                            ^

Error: Command failed: cd open-zwave-1.4 && make && sudo make install
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp: In member function ‘virtual bool OpenZWave::DoorLockLogging::HandleMsg(const uint8*, uint32, uint32)’:
/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/src/command_classes/DoorLockLogging.cpp:313:48: error: ‘char* strncat(char*, const char*, size_t)’ output may be truncated copying between 0 and 253 bytes from a string of length 253 [-Werror=stringop-truncation]
                                         strncat(usercode, tmpusercode, sizeof(usercode) - strlen(usercode) - 1 );
                                         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make[1]: *** [/opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/cpp/build/support.mk:151: /opt/iobroker/node_modules/iobroker.zwave/open-zwave-1.4/.lib/DoorLockLogging.o] Fehler 1
make: *** [Makefile:20: all] Fehler 2

    at checkExecSyncError (child_process.js:629:11)
    at Object.execSync (child_process.js:666:13)
    at doScript (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:13:15)
    at installOpenZwaveFromSource (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:154:3)
    at installOpenZwave (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:139:3)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zwave/lib/preinstall.js:27:7)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})


npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker.zwave@1.4.2 preinstall: `node lib/preinstall.js`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the iobroker.zwave@1.4.2 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-14T19_50_10_182Z-debug.log

host.IOBroker install adapter zwave
ERROR: host.IOBroker Cannot install zwave
ERROR: process exited with code 13

[arteck]

@gery80
welche version versuchst du zu installieren ???