Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Tester
  4. [Aufruf] ZigBee CC253x Adapter

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.7k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.2k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    3.1k

[Aufruf] ZigBee CC253x Adapter

Geplant Angeheftet Gesperrt Verschoben Tester
1.1k Beiträge 131 Kommentatoren 384.6k Aufrufe 7 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • XxJooOX Offline
    XxJooOX Offline
    XxJooO
    schrieb am zuletzt editiert von
    #368

    Hallo, kann es sein, dass auch in der Version 0.7.7 des Adapters die Werte der Batterien noch nicht gefixt sind? Nachdem der Fehler in 0.7.6 erstmals aufgetreten ist wurde der Status der Xiaomi Tür-Fenster-Sensoren gefixt. Meine Batterien zeigen aber wieder oder immer noch, wie bei 0.7.6, alle 100%.

    ioBroker auf Intel NUC - Homematic CCU3/pivCCU auf Raspi 3B+

    1 Antwort Letzte Antwort
    0
    • N Offline
      N Offline
      NetFritz
      schrieb am zuletzt editiert von
      #369

      Hallo

      @macjoshua

      Hast du nach der installation en Upload gemacht?

      Das das auch beim zigbee Adapter.

      Gruß NetFritz

      1 Antwort Letzte Antwort
      0
      • T Offline
        T Offline
        Tagiwara
        schrieb am zuletzt editiert von
        #370

        Wie kann ich denn mit Alexa beispielsweise die Temperatur eines Sensors abfragen? Mit dem original Xiaomi Gateway brauchte ich nur ein Smart Gerät im Cloud Adapter anlegen und konnte das abfragen. Das geht ja aber jetzt nicht mehr (zumindest bei mir nicht).

        Wie macht ihr das?

        1 Antwort Letzte Antwort
        0
        • M Offline
          M Offline
          macjoshua
          schrieb am zuletzt editiert von
          #371

          @NetFritz:

          Hallo

          @macjoshua

          Hast du nach der installation en Upload gemacht?

          Das das auch beim zigbee Adapter.

          Gruß NetFritz `

          Muss man das? Ich habe es eben nachträglich gemacht, ohne Erfolg. Jetzt kann ich wieder beliebig die Kachel oder das Objekt löschen, beim Neustart ist wieder alles (mit Fragezeichen) da.

          EDIT: Jetzt weiß ich was du meinst! Passiert bei der Installation über die Web-GUI automatisch.

          1 Antwort Letzte Antwort
          0
          • N Offline
            N Offline
            NetFritz
            schrieb am zuletzt editiert von
            #372

            Hallo
            > Muss man das?
            Ich hatte nach einem Update und löschen des Objektes und neu anlernen auch das Fragezeichen drin.

            Nach einen Update war das Gerät in der Kachel richtig drin und der Objektordner richtig gefüllt.

            Gruß NetFritz

            1 Antwort Letzte Antwort
            0
            • M Offline
              M Offline
              macjoshua
              schrieb am zuletzt editiert von
              #373

              @NetFritz:

              Ich hatte nach einem Update und löschen des Objektes und neu anlernen auch das Fragezeichen drin.

              Nach einen Update war das Gerät in der Kachel richtig drin und der Objektordner richtig gefüllt.

              Gruß NetFritz `

              Danke für den Tipp, hat aber auch nichts gebracht.

              1 Antwort Letzte Antwort
              0
              • modmaxM Offline
                modmaxM Offline
                modmax
                schrieb am zuletzt editiert von
                #374

                @arteck

                Bzgl. battery habe ich gesehen, daß Ilya dort den direkten Wert von Xiaomi nun übernimmt.

                Hatte mich nämlich gewundert, wieso all meine Geräte auf einmal wieder 100% haben.

                Das haste in deinem Repo ja wieder geändert und berechnest den Batteriestatus wieder

                nach der bisherigen Methode (also %-Anzahl zwischen 2,7 und 3,2 Volt) und den Xiaomi-Status

                als battery_sec nach dem was die Xiaomi-Geräte schicken.

                Ist hier geplant, daß wieder anders zu gestalten und nur eine Methode zu verwenden,

                da die Xiaomi-Geräte Ihren Status wohl von 0-3,2V schicken …, wobei die Geräte

                schon bei weniger als 2,7V nicht funktionieren dürften?

                Nur so als Frage .. weil ich mich gestern echt wunderte wieso mit der Version 0.7.7

                nun fast alle Gerät wieder 100% haben und der Rest 99% ...

                MfG Markus

                1 Antwort Letzte Antwort
                0
                • C Offline
                  C Offline
                  Chris_
                  schrieb am zuletzt editiert von
                  #375

                  @arteck:

                  IKEA TRÅDFRI Fernbedienung geht noch nicht `

                  Moin,

                  erstmal vielen Dank für Eure Arbeit!

                  Besteht eine Chance dass das IKEA TRÅDFRI REMOTE noch umgesetzt wird?

                  Ich will nicht drängeln, nur, wenn nicht, dann würde ich mich eben nach anderen Optionen umsehen. Wenn das aber irgendwann gehen würde, würde ich warten. Aber ich fand die Tradfri Remote recht gut und günstig.

                  Kennt jemand ausser den Xiaomi Switches alternativen im ~~10€ Bereich?

                  Danke

                  Chris

                  1 Antwort Letzte Antwort
                  0
                  • arteckA Offline
                    arteckA Offline
                    arteck
                    Developer Most Active
                    schrieb am zuletzt editiert von
                    #376

                    @modmax:

                    @arteck

                    Bzgl. battery habe ich gesehen, daß Ilya dort den direkten Wert von Xiaomi nun übernimmt.

                    Hatte mich nämlich gewundert, wieso all meine Geräte auf einmal wieder 100% haben.

                    Das haste in deinem Repo ja wieder geändert und berechnest den Batteriestatus wieder

                    nach der bisherigen Methode (also %-Anzahl zwischen 2,7 und 3,2 Volt) und den Xiaomi-Status

                    als battery_sec nach dem was die Xiaomi-Geräte schicken.

                    Ist hier geplant, daß wieder anders zu gestalten und nur eine Methode zu verwenden,

                    da die Xiaomi-Geräte Ihren Status wohl von 0-3,2V schicken …, wobei die Geräte

                    schon bei weniger als 2,7V nicht funktionieren dürften?

                    Nur so als Frage .. weil ich mich gestern echt wunderte wieso mit der Version 0.7.7

                    nun fast alle Gerät wieder 100% haben und der Rest 99% ...

                    MfG Markus `

                    mir ist es egal.. es ist nur in meinem Repo.. noch kein PR dafür gestellt..

                    sollte man sich vielleicht nur einigen :D

                    zigbee hab ich, zwave auch, nuc's genauso und HA auch

                    1 Antwort Letzte Antwort
                    0
                    • K Offline
                      K Offline
                      Kueppert
                      schrieb am zuletzt editiert von
                      #377

                      Macht das mit zwischen 2,7 und 3,x nicht mehr Sinn?

                      Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk

                      UDM Pro, Intel NUC - ioBroker in Proxmox-VM, PiHole+Grafana&Influx+TasmoAdmin in LXCs, Raspberry Pi3 (als CCU), Zigbee-Stick Sonoff, Synology DS918+

                      1 Antwort Letzte Antwort
                      0
                      • L Offline
                        L Offline
                        Lars89
                        schrieb am zuletzt editiert von
                        #378

                        Hallo,

                        habe seit heute folgendes Problem:

                        in der LOG steht````
                        host.raspberrypi 2018-10-28 13:12:44.720 info Restart adapter system.adapter.zigbee.0 because enabled
                        host.raspberrypi 2018-10-28 13:12:44.720 error instance system.adapter.zigbee.0 terminated with code 7 (Adapter already running)
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: linkquality: 63 } { cid: 'genBinaryValue', modelId: 'lumi.router' }
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: presentValue: 146 } },
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: inactiveText: 'NEIGHBOR',
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: { description: '108/xxxxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.720 error Caught by controller[19]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.719 error Caught by controller[19]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: 2018-10-28T12:12:34.861Z zigbee:controller event attReport { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: linkquality: 63 }
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: presentValue: 146 } },
                        host.raspberrypi 2018-10-28 13:12:44.718 error Caught by controller[19]: inactiveText: 'NEIGHBOR',
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: { description: '108/xxxxxxxxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.717 error Caught by controller[19]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.716 error Caught by controller[19]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.715 error Caught by controller[19]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: 2018-10-28T12:12:34.860Z zigbee:controller debug handleMessage { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: zclIncomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: linkquality: 63 } { cid: 'genBinaryValue', modelId: 'lumi.router' }
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: presentValue: 63 } },
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: inactiveText: 'COORD',
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: { description: '0/xxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: data:
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.712 error Caught by controller[19]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.711 error Caught by controller[19]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[19]: 2018-10-28T12:12:34.855Z zigbee:controller event attReport { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[18]: linkquality: 63 }
                        host.raspberrypi 2018-10-28 13:12:44.710 error Caught by controller[18]: presentValue: 63 } },
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: inactiveText: 'COORD',
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: { description: '0/xxxxxxxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: data:
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: data:
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.709 error Caught by controller[18]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.708 error Caught by controller[18]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[18]: 2018-10-28T12:12:34.853Z zigbee:controller debug handleMessage { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[17]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: zclIncomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[16]: linkquality: 63 } { cid: 'genBinaryValue', modelId: 'lumi.router' }
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[16]: minimumOffTime: 0 } },
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[16]: relinquishDefault: 1,
                        host.raspberrypi 2018-10-28 13:12:44.707 error Caught by controller[16]: presentValue: 47,
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: inactiveText: 'PARENT',
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: { description: '49999/xxxxxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: data:
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: data:
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.706 error Caught by controller[16]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.705 error Caught by controller[16]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.699 error Caught by controller[16]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.699 error Caught by controller[16]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.699 error Caught by controller[16]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.699 error Caught by controller[16]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[16]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[16]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[16]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[16]: 2018-10-28T12:12:34.850Z zigbee:controller event attReport { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: linkquality: 63 }
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: minimumOffTime: 0 } },
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: relinquishDefault: 1,
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: presentValue: 47,
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: inactiveText: 'PARENT',
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: { description: '49999/xxxxxxxxxxxxxxxxx',
                        host.raspberrypi 2018-10-28 13:12:44.698 error Caught by controller[15]: data:
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: { cid: 'genBinaryValue',
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: data:
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.697 error Caught by controller[15]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.696 error Caught by controller[15]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[15]: 2018-10-28T12:12:34.848Z zigbee:controller debug handleMessage { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[14]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: zclIncomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[13]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:msgHdlr IND <-- AF:incomingMsg, transId: 0
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[12]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: incomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.695 error Caught by controller[11]: Sun, 28 Oct 2018 12:12:34 GMT cc-znp:AREQ <-- AF:incomingMsg, { groupid: 0, clusterid: 17, srcaddr: 40103, srcendpoint: 8, dstendpoint: 1, wasbroadcast: 0, linkquality: 63, s
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[10]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:msgHdlr IND <-- AF:incomingMsg, transId: 0
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[9]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: incomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[8]: Sun, 28 Oct 2018 12:12:34 GMT cc-znp:AREQ <-- AF:incomingMsg, { groupid: 0, clusterid: 17, srcaddr: 40103, srcendpoint: 8, dstendpoint: 1, wasbroadcast: 0, linkquality: 63, se
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[7]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:msgHdlr IND <-- AF:incomingMsg, transId: 0
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[6]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: incomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[5]: Sun, 28 Oct 2018 12:12:34 GMT cc-znp:AREQ <-- AF:incomingMsg, { groupid: 0, clusterid: 17, srcaddr: 40103, srcendpoint: 8, dstendpoint: 1, wasbroadcast: 0, linkquality: 63, se
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[4]: linkquality: 63 } { cid: 'genOnOff', modelId: 'lumi.router' }
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[4]: data: { cid: 'genOnOff', data: { onOff: 0 } },
                        host.raspberrypi 2018-10-28 13:12:44.694 error Caught by controller[4]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.693 error Caught by controller[4]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.692 error Caught by controller[4]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[4]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[4]: 2018-10-28T12:12:34.759Z zigbee:controller event attReport { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: linkquality: 63 }
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: data: { cid: 'genOnOff', data: { onOff: 0 } },
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: report: [Function] } ],
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: write: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: read: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: unbind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: bind: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.691 error Caught by controller[3]: functional: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: foundation: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onZclFunctional: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onZclFoundation: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onAfIncomingMsgExt: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onAfIncomingMsg: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onAfReflectError: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: onAfDataConfirm: null,
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: clusters: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.690 error Caught by controller[3]: outClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: inClusterList: [Array],
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: devId: 256,
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: epId: 8,
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: profId: 260,
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: device: [Object],
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: isLocal: [Function],
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: [ Endpoint {
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: endpoints:
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: 2018-10-28T12:12:34.756Z zigbee:controller debug handleMessage { type: 'attReport',
                        host.raspberrypi 2018-10-28 13:12:44.689 error Caught by controller[3]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: zclIncomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.688 error Caught by controller[2]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:msgHdlr IND <-- AF:incomingMsg, transId: 0
                        host.raspberrypi 2018-10-28 13:12:44.688 error Caught by controller[1]: Sun, 28 Oct 2018 12:12:34 GMT zigbee-shepherd:af dispatchIncomingMsg(): type: incomingMsg, msg: [object Object]
                        host.raspberrypi 2018-10-28 13:12:44.687 error Caught by controller[0]: Sun, 28 Oct 2018 12:12:34 GMT cc-znp:AREQ <-- AF:incomingMsg, { groupid: 0, clusterid: 6, srcaddr: 40103, srcendpoint: 8, dstendpoint: 1, wasbroadcast: 0, linkquality: 63, sec
                        host.raspberrypi 2018-10-28 13:12:42.767 info instance system.adapter.zigbee.0 started with pid 23729
                        host.raspberrypi 2018-10-28 13:12:12.753 info Restart adapter system.adapter.zigbee.0 because enabled
                        host.raspberrypi 2018-10-28 13:12:12.753 error instance system.adapter.zigbee.0 terminated with code 7 (Adapter already running)

                        
                        Und das wiederholt sich in Dauerschleife in der LOG. Der Adapter macht warum auch immer, immer wieder ein neustart.
                        
                        Kann damit irgendjemand was anfangen und hat einen Lösungsansatz.
                        
                        Adapterversion 0.7.6
                        
                        Gruß Lars
                        1 Antwort Letzte Antwort
                        0
                        • C Offline
                          C Offline
                          chr-jordan
                          schrieb am zuletzt editiert von
                          #379

                          @arteck:

                          @chr-jordan:

                          Ich habe eine Phillips Hue LTW001 (ambience white - dimmbar und Weißtemperatur einstellbar). Diese wird auch noch als Fragezeichen-Kachel angezeigt.

                          LTW001

                          001788010237052d

                          Christopher `

                          installiere mal aus meinem Repo..zum testen

                          https://github.com/arteck/ioBroker.zigbee `

                          Danke arteck mit deiner 0.7.6 funktioniert die Phillips Hue LTW001 . LTW012 (Hue White ambiance E14) gehen auch.

                          Schönen Sonntag!

                          1 Antwort Letzte Antwort
                          0
                          • modmaxM Offline
                            modmaxM Offline
                            modmax
                            schrieb am zuletzt editiert von
                            #380

                            @lars89

                            Starte mal iobroker neu .. nicht nur den Adapter…

                            1 Antwort Letzte Antwort
                            0
                            • M Offline
                              M Offline
                              MagicSven
                              schrieb am zuletzt editiert von
                              #381

                              @Tagiwara:

                              Wie kann ich denn mit Alexa beispielsweise die Temperatur eines Sensors abfragen? Mit dem original Xiaomi Gateway brauchte ich nur ein Smart Gerät im Cloud Adapter anlegen und konnte das abfragen. Das geht ja aber jetzt nicht mehr (zumindest bei mir nicht).

                              Wie macht ihr das? ` Im Cloud Adapter den Temperatur Datenpunkt anlegen und einen Namen vergeben wie z.B. Wohnzimmer.

                              "Alexa, wie ist die Temperatur im Wohnzimmer" und schon erhälst du die Antwort.

                              Gesendet von meinem SM-G960F mit Tapatalk

                              1 Antwort Letzte Antwort
                              0
                              • C Offline
                                C Offline
                                Christian.B
                                schrieb am zuletzt editiert von
                                #382

                                @modmax:

                                @lars89

                                Starte mal iobroker neu .. nicht nur den Adapter… `
                                eine wirklich peinliche Frage. Wie startet man den iobroker richtig neu?

                                Ich ziehe immer einmal den Netzstecker von Raspi.

                                viele Grüße

                                Christian

                                1 Antwort Letzte Antwort
                                0
                                • C Offline
                                  C Offline
                                  Christian.B
                                  schrieb am zuletzt editiert von
                                  #383

                                  @Allodo:

                                  Jetzt habe ich doch ein Problem mit meinem Rauchmelder (Xiaomi Mijia Honeywell) :(

                                  Ich habe gestern mal einen Alarm ausgelöst, um zu sehen, was im iobroker angezeigt wird um darauf reagieren zu können. Leider wird dort gar nix angezeigt, außer dem Batteriestatus und das eine Verbindung besteht. :roll:

                                  Der Punkt mit Alarmstatus war leer, wie vor dem Alarm. Ich hätte jetzt damit gerechnet, dass irgendein Eintrag vorhanden ist.

                                  Weiß jemand, wie ich die Rauchmelder vernetze? `

                                  @Allodo:

                                  Für den Rauchmelder scheint wohl ein wichtiger Eintrag zu fehlen.

                                  Und zwar genau der, der angibt, ob ein Alarm ausgelöst wurde :shock:

                                  Xiaomi Adapter (Habe ich aus einem Video kopiert)

                                  Xiaomi Adapter.png

                                  Zigbee Adapter

                                  Zigbee Adapter.png

                                  Habe auch schon mehrfach gepairt (Version 0.7.7), aber der Eintrag will einfach nicht erscheinen :( `

                                  Ich wollte einmal meine Erfahrungen zum Xiaomi Mijia Honeywell Rauchmelder aufschreiben.

                                  Habe 2 von den Geräten am cc2530 angemeldet.

                                  Bei mir verhält es sich so, dass der Status unter Objekte bei einer manuellen Alarmauslösung über den Knopf tatsächlich auf false bleibt. Bei diesem Vorgang sieht man, dass die Aktion erkannt wird da die Einträge "battery,status, voltage" bei Tastendruck alle gleichzeitig kurz grün aufleuchten. Status beleibt jedoch "false".

                                  Wenn man aber den Alarm mit echtem Rauch auslöst, wechselt der "status" auf true!

                                  Somit habe ich mir ein Skript geschrieben mit dem ich bei Rauch per Telegram informiert werde.

                                  Das funktioniert 1a!

                                  Dennoch wäre es tatsächlich sehr schön, wenn man bei der manuellen Alarmauslösung die gesamte Kette bis zum Handy oder Ähnliches regelmäßig, ohne echten Rauch zu produzieren, nur durch den Tastendruck überprüfen könnte.

                                  Benutze derzeit die zigbee Version 0.7.6

                                  viele Grüße

                                  Christian

                                  1 Antwort Letzte Antwort
                                  0
                                  • M Offline
                                    M Offline
                                    MagicSven
                                    schrieb am zuletzt editiert von
                                    #384

                                    @ Christian, vielen Dank für die Erkenntnis. Das ist sicher für den ein oder anderen ein wichtiger Hinweis

                                    Gesendet von meinem SM-G960F mit Tapatalk

                                    1 Antwort Letzte Antwort
                                    0
                                    • a200A Offline
                                      a200A Offline
                                      a200
                                      schrieb am zuletzt editiert von
                                      #385

                                      @Christian.B:

                                      eine wirklich peinliche Frage. Wie startet man den iobroker richtig neu?

                                      Ich ziehe immer einmal den Netzstecker von Raspi. `

                                      sudo shutdown -r now
                                      
                                      

                                      oder

                                      sudo reboot
                                      

                                      IoBroker auf QNAP TS-451, Raspi und NUC

                                      1 Antwort Letzte Antwort
                                      0
                                      • L Offline
                                        L Offline
                                        Lars89
                                        schrieb am zuletzt editiert von
                                        #386

                                        Hallo, habe den iobroker bzw. den ganzen Raspi öfters neugestartet. Jetzt nach dem gefühlten 300 mal scheint wieder alles zu laufen.

                                        Bekomme jetzt nur noch "eine" Fehlermeldung ständig in der LOG:

                                        zigbee.0	2018-10-29 18:50:51.602	error	Zigbee publish to 'xxxxxxxxxxxx', genOnOff - off - {} - 3 failed with error Error: AF data request fails, status code: 205\. No network route. Please confirm that the device has (re)joined the n
                                        zigbee.0	2018-10-29 18:50:36.494	error	Zigbee publish to 'xxxxxxxxxxxxxx', genLevelCtrl - moveToLevelWithOnOff - {"level":150,"transtime":0} - 3 failed with error Error: Timed out after 30000 ms
                                        zigbee.0	2018-10-29 18:50:36.396	error	Zigbee publish to 'xxxxxxxxxxx', genLevelCtrl - moveToLevelWithOnOff - {"level":150,"transtime":0} - 3 failed with error Error: Timed out after 30000 ms
                                        zigbee.0	2018-10-29 18:50:36.120	error	Zigbee publish to 'xxxxxxxxxxxxxxx', genOnOff - off - {} - 3 failed with error Error: AF data request fails, status code: 233\. MAC no ack.
                                        

                                        sind alles OSRAM Lampen, scheinbar gibt es da noch irgendwelche Probleme. Sie Funktionieren alle einwandfrei, und eine Route so wie im Fehler steht,besteht auch auf jedenfalls laut Netzwerkkarte.

                                        LG

                                        1 Antwort Letzte Antwort
                                        0
                                        • modmaxM Offline
                                          modmaxM Offline
                                          modmax
                                          schrieb am zuletzt editiert von
                                          #387

                                          Den Fehler hatte ich auch mal … da stand mein SmartPlusPlug von OSRAM zu weit weg.

                                          Das bedeutete, daß er Befehle annehmen konnte ... aber das Senden der Bestätigung vom Plug zurück zum Coordinator

                                          erfolgte nicht "in time"; weil eben zu weit weg ...

                                          1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          385

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe