ioBroker nicht mehr erreichbar

Thomas Braun

@hru sagte in ioBroker nicht mehr erreichbar:

Was ist das für eine Meldung und wie bekomme ich die weg?

Da wird über ein Netzwerkinterface versucht eine Verbindung aufzubauen. Wenn die zwar aktiv, aber nicht konfiguriert ist (WLAN z. B.) dann passiert genau das was du da siehst. Nach 2 Minuten wird der Verbindungsversuch abgebrochen.

https://www.thomas-krenn.com/de/wiki/Job_systemd-networkd-wait-online.service_start_running

Edit: Die Anleitung ist für Ubuntu. Die funktioniert für RaspberryOS nicht (da gibt es kein Netplan).
Du kannst aber die Netzwerkinterfaces in

sudo raspi-config

einstellen.

Edit2: Okay, in aktuellen Versionen gibt es wohl doch netplan.

hru

Hallo,

danke für den Hinweis.
Vermutlich kommt die Meldung wirklich, weil versucht wird per WLAN eine Verbindung aufzubauen.

Hier die Fehlermeldungen seit dem letzten Bootvorgang:

journalctl -p err -b
Dec 17 19:21:03 pinas systemd-modules-load[340]: Failed to find module 'softdog'
Dec 17 19:21:07 pinas systemd-udevd[395]: /usr/lib/udev/rules.d/90-alsa-restore.rules:18 GOTO="alsa_restore_std" has no matching label, ignoring.
Dec 17 19:21:07 pinas systemd-udevd[395]: /usr/lib/udev/rules.d/90-alsa-restore.rules:22 GOTO="alsa_restore_std" has no matching label, ignoring.
Dec 17 19:23:12 pinas systemd-networkd-wait-online[730]: Timeout occurred while waiting for network connectivity.
Dec 17 19:23:12 pinas systemd[1]: Failed to start systemd-networkd-wait-online.service - Wait for Network to be Configured.

Dabei habe ich gedacht, dass ich per "dtoverlay=disable-wifi" in der config.txt das WLAN ausgeschaltet hätte. Funktioniert das nicht?

Gibt es eine Möglichkeit, die anderen Fehlermeldungen abzustellen?

Komisch, vor den Fehlermeldungen steht der Zeitstempel 17.12. obwohl ich den Raspi eben gerade neu gebootet habe.
Heißt das, dass es bei dem Neustart eben gerade keine Fehler gegeben hat?

Danke und Gruß

Hartmut

Thomas Braun

@hru sagte in ioBroker nicht mehr erreichbar:

Funktioniert das nicht?

Doch. Das dürfte nämlich der Grund sein, warum das überhaupt bei dir dazu kommt.
Der networkd versucht nun nämlich (vergeblich) über das wohl konfigurierte Interface eine Einstellung zu bekommen. Du musst das Interface auch auf Eis legen, nicht nur die Hardware.

Gibt es eine Möglichkeit, die anderen Fehlermeldungen abzustellen?

Das mit alsa? Kannste lassen, ist nicht schlimm, wird ignoriert.

Heißt das, dass es bei dem Neustart eben gerade keine Fehler gegeben hat?

journalctl -b zeigt eigentlich nur den letzten sauberen boot-Vorgang.

Auf meinem System halt z. B.:

[thomas@roamer ~]$ journalctl -b
Dez 21 15:25:23 roamer kernel: Linux version 6.18.2-arch2-1 (linux@archlinux) (gcc (GCC) 15.2.1 20251112, GNU ld (GNU Binutils) 2.45.1) #1 SMP PREEMPT_DYNAMIC Thu, 18 Dec 2025 18:00:18 +0000

15:25 passt hier.

Thomas Braun

@hru sagte in ioBroker nicht mehr erreichbar:

systemd-networkd-wait-online[730]: Timeout occurred while waiting for network connectivity.

Versuch es mal damit anzupacken:

https://www.thomas-krenn.com/de/wiki/Job_systemd-networkd-wait-online.service_start_running

hru

Hallo zusammen,
hier ein Update:
Obwohl der Raspi nicht mehr mit der SD-Karte starten wollte konnte die SD-Karte trotzdem noch gelesen werden.
Ich habe dem Programm "Win32 Disk Imager" ein Image der "defekten" SD-Karte erstellt und dieses auf eine neue SD-Karte geschrieben.
Mit dieser neuen SD-Karte lässt sich der Raspi wieder starten!
Also habe ich jetzt wieder ein lauffähiges System. (puh)

Jetzt will ich mich doch mal ausführlich um das Thema Backup-Adapter kümmern.
Kann gut sein, dass ich hier nochmal um Unterstützung bitten werde.

Gruß Hartmut

Thomas Braun

@hru
Dann zeig jetzt mal die Ausgabe von

iob diag

damit man mal sieht wo du da überhaupt stehst.

Homoran

@hru sagte in ioBroker nicht mehr erreichbar:

Obwohl der Raspi nicht mehr mit der SD-Karte starten wollte konnte die SD-Karte trotzdem noch gelesen werden.
Ich habe dem Programm "Win32 Disk Imager" ein Image der "defekten" SD-Karte erstellt und dieses auf eine neue SD-Karte geschrieben.
Mit dieser neuen SD-Karte lässt sich der Raspi wieder starten!

Das wäre Vodoo!

Wenn da Dateien defekt waren, müssen sie es jetzt auch sein.

hru

@Homoran sagte in ioBroker nicht mehr erreichbar:

Das wäre Vodoo!

Wenn da Dateien defekt waren, müssen sie es jetzt auch sein.

Ich habe dazu in den letzten Tagen einiges gelesen. (aber nur bedingt verstanden;-)
Könnte sein, dass die SD-Karte auf eine Art Readonly-Modus gewechselt hat, wodurch der Raspi nicht mehr von ihr starten konnte. Die vorhandenen Daten sind aber noch lesbar.

Homoran

@hru sagte in ioBroker nicht mehr erreichbar:

Könnte sein, dass die SD-Karte auf eine Art Readonly-Modus gewechselt hat, wodurch der Raspi nicht mehr von ihr starten konnte. Die vorhandenen Daten sind aber noch lesbar.

Dann würde sie auch starten (read) aber keine Änderungen behalten

hru

@Thomas-Braun Hier die Ausgabe von iob diag

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: pinas
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:17:43 up 43 min,  2 users,  load average: 0.13, 0.20, 0.24
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed 'bookworm'. Please check yourself if the Operating System is actively maintained.

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Tue 2025-12-30 14:17:43 CET
           Universal time: Tue 2025-12-30 13:17:43 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
hru
HOME=/home/hru
GROUPS=hru adm dialout cdrom sudo audio video plugdev games users input render netdev _ssh gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - LSB: Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.8G        5.3G         12M        1.2G        6.4G
Swap:           209M          0B        209M
Total:          8.4G        1.8G        5.5G

Active iob-Instances:   13

         7820 M total memory
         1695 M used memory
         2215 M active memory
          348 M inactive memory
         5065 M free memory
           95 M buffer memory
         1067 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 14:17:44 up 43 min,  2 users,  load average: 0.13, 0.20, 0.24
Tasks: 255 total,   1 running, 251 sleeping,   0 stopped,   3 zombie
%Cpu(s): 10.0 us, 20.0 sy,  0.0 ni, 70.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.8 total,   5065.8 free,   1696.2 used,   1163.0 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   6124.7 avail Mem

*** FAILED SERVICES ***

  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
* lighttpd.service            loaded failed failed Lighttpd Daemon
* syncthing@syncthing.service loaded failed failed Syncthing - Open Source Continuous File Synchronization for syncthing

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  2.8M  1.6G   1% /run
/dev/mmcblk0p2 ext4       29G   21G  6.7G  76% /
tmpfs          tmpfs     3.9G   12K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /tmp
/dev/mmcblk0p1 vfat      510M   92M  419M  18% /boot/firmware
/dev/sda2      btrfs     932G  4.2G  926G   1% /srv/dev-disk-by-uuid-ba59a13b-32bb-4d41-9433-56afa044749a
tmpfs          tmpfs     783M   24K  783M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Dec 30 13:34:17 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=DC:A6:32:B6:1C:04 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=0a7247d3-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Dec 30 13:34:21 2025] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none.
[Tue Dec 30 13:34:24 2025] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w.

Show mounted filesystems:
TARGET                                                       SOURCE         FSTYPE OPTIONS
/                                                            /dev/mmcblk0p2 ext4   rw,noatime,nodiratime
|-/boot/firmware                                             /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/srv/dev-disk-by-uuid-ba59a13b-32bb-4d41-9433-56afa044749a /dev/sda2      btrfs  rw,relatime,ssd,space_cache=v2,subvolid=5,subvol=/

Files in neuralgic directories:

/var:
3.8G    /var/
2.8G    /var/log/journal/84b8404402f646beb6c9935ffbcaf1f2
2.8G    /var/log/journal
2.8G    /var/log
665M    /var/lib

Archived and active journals take up 2.7G in the file system.

/opt/iobroker/backups:
23M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
220M    /opt/iobroker/iobroker-data/
140M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/backup-objects
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets

The five largest files in iobroker-data are:
25M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-C_W7K-9p.js
5.5M    /opt/iobroker/iobroker-data/states.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0012-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0014-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.6
/usr/bin/node           v20.19.6
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.34.1

nodejs:
  Installed: 20.19.6-1nodesource1
  Candidate: 20.19.6-1nodesource1
  Version table:
 *** 20.19.6-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
        500 http://security.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
pinas               pinas (version: 7.0.7, hostname: pinas         , alive, uptime: 2589)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : pinas                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : pinas                                    -  enabled
+ system.adapter.discovery.0              : discovery             : pinas                                    -  enabled
+ system.adapter.email.0                  : email                 : pinas                                    -  enabled
+ system.adapter.influxdb.0               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : pinas                                    -  enabled
+ system.adapter.modbus.0                 : modbus                : pinas                                    -  enabled
+ system.adapter.shelly.0                 : shelly                : pinas                                    -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartmeter.0             : smartmeter            : pinas                                    -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : pinas                                    -  enabled
  system.adapter.wolf-smartset.0          : wolf-smartset         : pinas                                    - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : pinas                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : pinas                                    -  enabled, port: 1882, bind: 0.0.0.0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "wolf-smartset": 2.1.2    , installed 2.1.2

Objects and States
Please stand by - This may take a while
Objects:        1167
States:         826

*** OS-Repositories and Updates ***
Get:1 file:/var/cache/openmediavault/archives ./ InRelease
Ign:1 file:/var/cache/openmediavault/archives ./ InRelease
Get:2 file:/var/cache/openmediavault/archives ./ Release
Ign:2 file:/var/cache/openmediavault/archives ./ Release
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Hit:4 http://packages.openmediavault.org/public sandworm InRelease
Hit:5 http://deb.debian.org/debian bookworm InRelease
Hit:6 http://httpredir.debian.org/debian bookworm-backports InRelease
Hit:7 http://security.debian.org/debian-security bookworm-security InRelease
Hit:8 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:9 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:10 http://deb.debian.org/debian bookworm-updates InRelease
Hit:11 https://apt.grafana.com stable InRelease
Hit:12 https://openmediavault.github.io/packages sandworm InRelease
Hit:13 https://repos.influxdata.com/debian stable InRelease
Hit:14 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:15 https://packages.sury.org/php bookworm InRelease
Get:16 https://apt.syncthing.net syncthing InRelease [24.2 kB]
Fetched 24.2 kB in 2s (10.7 kB/s)
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.72:5357     0.0.0.0:*               LISTEN      64757      9412       1306/python3
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      992        556        631/systemd-resolve
tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN      0          5055       852/connmand
tcp        0      0 127.0.0.54:53           0.0.0.0:*               LISTEN      992        558        631/systemd-resolve
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1004       9089       1760/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1004       8105       1760/iobroker.js-co
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          7655       873/cupsd
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN      0          8806       1486/smbd
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      993        10599      1590/influxd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1003       898/sshd: /usr/sbin
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          7830       1389/nginx: master
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN      0          8807       1486/smbd
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1004       14286      2032/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      111        7637       894/mosquitto
tcp        0      0 0.0.0.0:5355            0.0.0.0:*               LISTEN      992        544        631/systemd-resolve
tcp6       0      0 fe80::dea6:32ff:fe:5357 :::*                    LISTEN      64757      9422       1306/python3
tcp6       0      0 :::3000                 :::*                    LISTEN      115        9779       1759/grafana
tcp6       0      0 :::8081                 :::*                    LISTEN      1004       13663      1811/io.admin.0
tcp6       0      0 :::8086                 :::*                    LISTEN      993        10732      1590/influxd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          7654       873/cupsd
tcp6       0      0 ::1:53                  :::*                    LISTEN      0          5059       852/connmand
tcp6       0      0 :::445                  :::*                    LISTEN      0          8804       1486/smbd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1005       898/sshd: /usr/sbin
tcp6       0      0 :::80                   :::*                    LISTEN      0          7832       1389/nginx: master
tcp6       0      0 :::139                  :::*                    LISTEN      0          8805       1486/smbd
tcp6       0      0 :::1883                 :::*                    LISTEN      111        7638       894/mosquitto
tcp6       0      0 :::5355                 :::*                    LISTEN      992        552        631/systemd-resolve
udp        0      0 192.168.178.72:3702     0.0.0.0:*                           64757      9408       1306/python3
udp        0      0 239.255.255.250:3702    0.0.0.0:*                           64757      9406       1306/python3
udp        0      0 0.0.0.0:49149           0.0.0.0:*                           0          10270      852/connmand
udp        0      0 127.0.0.1:53            0.0.0.0:*                           0          5047       852/connmand
udp        0      0 127.0.0.54:53           0.0.0.0:*                           992        557        631/systemd-resolve
udp        0      0 127.0.0.53:53           0.0.0.0:*                           992        555        631/systemd-resolve
udp        0      0 192.168.178.72:68       0.0.0.0:*                           998        5118       391/systemd-network
udp        0      0 127.0.0.1:323           0.0.0.0:*                           0          10403      1366/chronyd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        935        684/avahi-daemon: r
udp        0      0 0.0.0.0:5355            0.0.0.0:*                           992        543        631/systemd-resolve
udp        0      0 0.0.0.0:55208           0.0.0.0:*                           64757      9407       1306/python3
udp        0      0 0.0.0.0:38890           0.0.0.0:*                           104        937        684/avahi-daemon: r
udp6       0      0 :::48317                :::*                                64757      9417       1306/python3
udp6       0      0 fe80::dea6:32ff:fe:3702 :::*                                64757      9418       1306/python3
udp6       0      0 ff02::c:3702            :::*                                64757      9416       1306/python3
udp6       0      0 ::1:53                  :::*                                0          5051       852/connmand
udp6       0      0 ::1:323                 :::*                                0          10404      1366/chronyd
udp6       0      0 :::546                  :::*                                0          9440       852/connmand
udp6   79808      0 fe80::dea6:32ff:feb:546 :::*                                998        10462      391/systemd-network
udp6       0      0 :::5353                 :::*                                104        936        684/avahi-daemon: r
udp6       0      0 :::5355                 :::*                                992        551        631/systemd-resolve
udp6       0      0 :::34378                :::*                                104        938        684/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-12-30 13:35:23.467  - info: host.pinas instance system.adapter.modbus.0 in version "6.3.2" started with pid 1978
2025-12-30 13:35:25.738  - info: modbus.0 (1978) starting. Version 6.3.2 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.19.6, js-controller: 7.0.7
2025-12-30 13:35:26.800  - info: modbus.0 (1978) Connected to slave 192.168.178.45
2025-12-30 13:35:27.447  - info: host.pinas instance system.adapter.smartmeter.0 in version "3.4.0" started with pid 2001
2025-12-30 13:35:30.255  - info: smartmeter.0 (2001) starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v20.19.6, js-controller: 7.0.7
2025-12-30 13:35:31.481  - info: host.pinas instance system.adapter.smartmeter.1 in version "3.4.0" started with pid 2017
2025-12-30 13:35:32.511  - info: smartmeter.0 (2001) Received 26 values, 26 updated
2025-12-30 13:35:34.602  - info: smartmeter.1 (2017) starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v20.19.6, js-controller: 7.0.7
2025-12-30 13:35:35.872  - info: host.pinas instance system.adapter.shelly.0 in version "10.4.1" started with pid 2032
2025-12-30 13:35:36.402  - info: smartmeter.1 (2017) Received 26 values, 26 updated
2025-12-30 13:35:39.936  - info: host.pinas instance system.adapter.discovery.0 in version "5.0.0" started with pid 2043
2025-12-30 13:35:41.581  - info: shelly.0 (2032) starting. Version 10.4.1 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.19.6, js-controller: 7.0.7
2025-12-30 13:35:42.112  - info: shelly.0 (2032) Starting in MQTT mode. Listening on 0.0.0.0:1882 (QoS 1)
2025-12-30 13:35:43.317  - info: discovery.0 (2043) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v20.19.6, js-controller: 7.0.7
2025-12-30 13:53:05.757  - info: admin.0 (1811) ==> Connected system.user.admin from ::ffff:192.168.178.99
2025-12-30 13:58:18.365  - info: admin.0 (1811) <== Disconnect system.user.admin from ::ffff:192.168.178.99 backitup
2025-12-30 13:58:18.395  - info: admin.0 (1811) <== Disconnect system.user.admin from ::ffff:192.168.178.99 admin
2025-12-30 13:58:19.024  - info: admin.0 (1811) ==> Connected system.user.admin from ::ffff:192.168.178.99
2025-12-30 13:58:25.107  - info: admin.0 (1811) ==> Connected system.user.admin from ::ffff:192.168.178.99
2025-12-30 13:58:29.317  - info: admin.0 (1811) <== Disconnect system.user.admin from ::ffff:192.168.178.99 backitup
2025-12-30 13:59:34.364  - info: admin.0 (1811) ==> Connected system.user.admin from ::ffff:192.168.178.99
2025-12-30 14:02:18.396  - info: admin.0 (1811) <== Disconnect system.user.admin from ::ffff:192.168.178.99 backitup
2025-12-30 14:05:55.180  - info: admin.0 (1811) ==> Connected system.user.admin from ::ffff:192.168.178.99
2025-12-30 14:06:49.610  - warn: backitup.0 (1963) [iobroker/clean] No older backup files are deleted, because this backup was started manually
2025-12-30 14:11:55.867  - info: admin.0 (1811) <== Disconnect system.user.admin from ::ffff:192.168.178.99 backitup

Gruß Hartmut

hru

iob diag wollte dass ich iobroker fix mache, habe ich gemacht.
Jetzt liefert iob diag die folgende Ausgabe

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: pinas
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:33:02 up 58 min,  2 users,  load average: 1.53, 0.99, 0.69
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Tue 2025-12-30 14:33:02 CET
           Universal time: Tue 2025-12-30 13:33:02 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
hru
HOME=/home/hru
GROUPS=hru adm dialout cdrom sudo audio video plugdev games users input render netdev _ssh gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - LSB: Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.9G        4.9G         12M        1.5G        6.3G
Swap:           209M          0B        209M
Total:          8.4G        1.9G        5.1G

Active iob-Instances:   11

         7820 M total memory
         1773 M used memory
         2239 M active memory
          640 M inactive memory
         4685 M free memory
          128 M buffer memory
         1337 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 14:33:03 up 58 min,  2 users,  load average: 1.53, 0.99, 0.69
Tasks: 254 total,   1 running, 251 sleeping,   0 stopped,   2 zombie
%Cpu(s): 12.5 us, 12.5 sy,  0.0 ni, 75.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.8 total,   4685.0 free,   1773.7 used,   1466.3 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   6047.1 avail Mem

*** FAILED SERVICES ***

  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
* lighttpd.service            loaded failed failed Lighttpd Daemon
* syncthing@syncthing.service loaded failed failed Syncthing - Open Source Continuous File Synchronization for syncthing

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  2.8M  1.6G   1% /run
/dev/mmcblk0p2 ext4       29G   21G  6.7G  76% /
tmpfs          tmpfs     3.9G   12K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /tmp
/dev/mmcblk0p1 vfat      510M   92M  419M  18% /boot/firmware
/dev/sda2      btrfs     932G  4.2G  926G   1% /srv/dev-disk-by-uuid-ba59a13b-32bb-4d41-9433-56afa044749a
tmpfs          tmpfs     783M   24K  783M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Dec 30 13:34:17 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=DC:A6:32:B6:1C:04 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=0a7247d3-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Dec 30 13:34:21 2025] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none.
[Tue Dec 30 13:34:24 2025] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w.

Show mounted filesystems:
TARGET                                                       SOURCE         FSTYPE OPTIONS
/                                                            /dev/mmcblk0p2 ext4   rw,noatime,nodiratime
|-/boot/firmware                                             /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/srv/dev-disk-by-uuid-ba59a13b-32bb-4d41-9433-56afa044749a /dev/sda2      btrfs  rw,relatime,ssd,space_cache=v2,subvolid=5,subvol=/

Files in neuralgic directories:

/var:
3.8G    /var/
2.8G    /var/log/journal/84b8404402f646beb6c9935ffbcaf1f2
2.8G    /var/log/journal
2.8G    /var/log
669M    /var/lib

Archived and active journals take up 2.7G in the file system.

/opt/iobroker/backups:
23M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
197M    /opt/iobroker/iobroker-data/
140M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/backup-objects
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-C_W7K-9p.js
7.0M    /opt/iobroker/iobroker-data/objects.jsonl
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0012-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0014-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.6
/usr/bin/node           v20.19.6
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.34.1

nodejs:
  Installed: 20.19.6-1nodesource1
  Candidate: 20.19.6-1nodesource1
  Version table:
 *** 20.19.6-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
        500 http://security.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
pinas               pinas (version: 7.0.7, hostname: pinas         , alive, uptime: 94)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : pinas                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : pinas                                    -  enabled
  system.adapter.discovery.0              : discovery             : pinas                                    -  enabled
+ system.adapter.email.0                  : email                 : pinas                                    -  enabled
+ system.adapter.influxdb.0               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : pinas                                    -  enabled
+ system.adapter.modbus.0                 : modbus                : pinas                                    -  enabled
  system.adapter.shelly.0                 : shelly                : pinas                                    -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartmeter.0             : smartmeter            : pinas                                    -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : pinas                                    -  enabled
  system.adapter.wolf-smartset.0          : wolf-smartset         : pinas                                    - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : pinas                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : pinas                                    -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : pinas                                    -  enabled, port: 8086
  system.adapter.shelly.0                 : shelly                : pinas                                    -  enabled, port: 1882, bind: 0.0.0.0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "wolf-smartset": 2.1.2    , installed 2.1.2

Objects and States
Please stand by - This may take a while
Objects:        1167
States:         839

*** OS-Repositories and Updates ***
Get:1 file:/var/cache/openmediavault/archives ./ InRelease
Ign:1 file:/var/cache/openmediavault/archives ./ InRelease
Get:2 file:/var/cache/openmediavault/archives ./ Release
Ign:2 file:/var/cache/openmediavault/archives ./ Release
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Err:3 file:/var/cache/openmediavault/archives ./ Packages
  Method gave a blank filename
Get:3 file:/var/cache/openmediavault/archives ./ Packages
Hit:4 http://security.debian.org/debian-security bookworm-security InRelease
Hit:5 http://deb.debian.org/debian bookworm InRelease
Hit:6 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:7 http://httpredir.debian.org/debian bookworm-backports InRelease
Hit:8 http://packages.openmediavault.org/public sandworm InRelease
Hit:9 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:10 http://deb.debian.org/debian bookworm-updates InRelease
Hit:11 https://repos.influxdata.com/debian stable InRelease
Hit:12 https://openmediavault.github.io/packages sandworm InRelease
Hit:13 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:14 https://packages.sury.org/php bookworm InRelease
Hit:15 https://apt.grafana.com stable InRelease
Get:16 https://apt.syncthing.net syncthing InRelease [24.2 kB]
Fetched 24.2 kB in 2s (11.0 kB/s)
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.72:5357     0.0.0.0:*               LISTEN      64757      9412       1306/python3
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      992        556        631/systemd-resolve
tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN      0          5055       852/connmand
tcp        0      0 127.0.0.54:53           0.0.0.0:*               LISTEN      992        558        631/systemd-resolve
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1004       53266      8711/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1004       53261      8711/iobroker.js-co
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          7655       873/cupsd
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN      0          8806       1486/smbd
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      993        10599      1590/influxd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1003       898/sshd: /usr/sbin
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          7830       1389/nginx: master
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN      0          8807       1486/smbd
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1004       56030      9059/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      111        7637       894/mosquitto
tcp        0      0 0.0.0.0:5355            0.0.0.0:*               LISTEN      992        544        631/systemd-resolve
tcp6       0      0 fe80::dea6:32ff:fe:5357 :::*                    LISTEN      64757      9422       1306/python3
tcp6       0      0 :::3000                 :::*                    LISTEN      115        9779       1759/grafana
tcp6       0      0 :::8081                 :::*                    LISTEN      1004       53336      8738/io.admin.0
tcp6       0      0 :::8086                 :::*                    LISTEN      993        10732      1590/influxd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          7654       873/cupsd
tcp6       0      0 ::1:53                  :::*                    LISTEN      0          5059       852/connmand
tcp6       0      0 :::445                  :::*                    LISTEN      0          8804       1486/smbd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1005       898/sshd: /usr/sbin
tcp6       0      0 :::80                   :::*                    LISTEN      0          7832       1389/nginx: master
tcp6       0      0 :::139                  :::*                    LISTEN      0          8805       1486/smbd
tcp6       0      0 :::1883                 :::*                    LISTEN      111        7638       894/mosquitto
tcp6       0      0 :::5355                 :::*                    LISTEN      992        552        631/systemd-resolve
udp        0      0 192.168.178.72:3702     0.0.0.0:*                           64757      9408       1306/python3
udp        0      0 239.255.255.250:3702    0.0.0.0:*                           64757      9406       1306/python3
udp        0      0 0.0.0.0:49149           0.0.0.0:*                           0          10270      852/connmand
udp        0      0 127.0.0.1:53            0.0.0.0:*                           0          5047       852/connmand
udp        0      0 127.0.0.54:53           0.0.0.0:*                           992        557        631/systemd-resolve
udp        0      0 127.0.0.53:53           0.0.0.0:*                           992        555        631/systemd-resolve
udp        0      0 192.168.178.72:68       0.0.0.0:*                           998        5118       391/systemd-network
udp        0      0 127.0.0.1:323           0.0.0.0:*                           0          10403      1366/chronyd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        935        684/avahi-daemon: r
udp        0      0 0.0.0.0:5355            0.0.0.0:*                           992        543        631/systemd-resolve
udp        0      0 0.0.0.0:55208           0.0.0.0:*                           64757      9407       1306/python3
udp        0      0 0.0.0.0:38890           0.0.0.0:*                           104        937        684/avahi-daemon: r
udp6       0      0 :::48317                :::*                                64757      9417       1306/python3
udp6       0      0 fe80::dea6:32ff:fe:3702 :::*                                64757      9418       1306/python3
udp6       0      0 ff02::c:3702            :::*                                64757      9416       1306/python3
udp6       0      0 ::1:53                  :::*                                0          5051       852/connmand
udp6       0      0 ::1:323                 :::*                                0          10404      1366/chronyd
udp6       0      0 :::546                  :::*                                0          9440       852/connmand
udp6  101824      0 fe80::dea6:32ff:feb:546 :::*                                998        10462      391/systemd-network
udp6       0      0 :::5353                 :::*                                104        936        684/avahi-daemon: r
udp6       0      0 :::5355                 :::*                                992        551        631/systemd-resolve
udp6       0      0 :::34378                :::*                                104        938        684/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-12-30 14:32:05.239  - info: influxdb.2 (8880) enabled logging of z1_2__1_8_0_bezug_tag, Alias=true, 7 points now activated
2025-12-30 14:32:05.240  - info: influxdb.2 (8880) enabled logging of z1_2__2_8_0_einspeisung_tag, Alias=true, 8 points now activated
2025-12-30 14:32:05.242  - info: influxdb.2 (8880) enabled logging of z3_4__2_8_0_einspeisung_oder_wallbox_tag, Alias=true, 9 points now activated
2025-12-30 14:32:05.243  - info: influxdb.2 (8880) enabled logging of z3_4__1_8_0_bezug_haus_tag, Alias=true, 10 points now activated
2025-12-30 14:32:05.248  - info: influxdb.2 (8880) enabled logging of diff_z3_z1__2_8_0_einspeisung_wallbox_tag, Alias=true, 11 points now activated
2025-12-30 14:32:05.249  - info: influxdb.2 (8880) enabled logging of diff_z1_z3__1_8_0_bezug_wallbox_tag, Alias=true, 12 points now activated
2025-12-30 14:32:05.325  - info: host.pinas instance system.adapter.email.0 in version "2.0.4" started with pid 8902
2025-12-30 14:32:08.257  - info: email.0 (8902) starting. Version 2.0.4 in /opt/iobroker/node_modules/iobroker.email, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:09.228  - info: host.pinas instance system.adapter.backitup.0 in version "3.3.10" started with pid 8922
2025-12-30 14:32:11.973  - info: backitup.0 (8922) starting. Version 3.3.10 in /opt/iobroker/node_modules/iobroker.backitup, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:12.062  - info: backitup.0 (8922) [iobroker] backup will be activated at 02:48 every 1 day(s)
2025-12-30 14:32:13.153  - info: host.pinas instance system.adapter.modbus.0 in version "6.3.2" started with pid 8937
2025-12-30 14:32:15.499  - info: modbus.0 (8937) starting. Version 6.3.2 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:16.763  - info: modbus.0 (8937) Connected to slave 192.168.178.45
2025-12-30 14:32:17.231  - info: host.pinas instance system.adapter.smartmeter.0 in version "3.4.0" started with pid 8989
2025-12-30 14:32:20.418  - info: smartmeter.0 (8989) starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:21.223  - info: host.pinas instance system.adapter.smartmeter.1 in version "3.4.0" started with pid 9028
2025-12-30 14:32:22.519  - info: smartmeter.0 (8989) Received 26 values, 26 updated
2025-12-30 14:32:24.669  - info: smartmeter.1 (9028) starting. Version 3.4.0 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:25.266  - info: host.pinas instance system.adapter.shelly.0 in version "10.4.1" started with pid 9059
2025-12-30 14:32:26.054  - info: smartmeter.1 (9028) Received 26 values, 26 updated
2025-12-30 14:32:28.716  - info: shelly.0 (9059) starting. Version 10.4.1 in /opt/iobroker/node_modules/iobroker.shelly, node: v20.19.6, js-controller: 7.0.7
2025-12-30 14:32:29.165  - info: host.pinas instance system.adapter.discovery.0 in version "5.0.0" started with pid 9085
2025-12-30 14:32:29.659  - info: shelly.0 (9059) Starting in MQTT mode. Listening on 0.0.0.0:1882 (QoS 1)
2025-12-30 14:32:32.437  - info: discovery.0 (9085) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v20.19.6, js-controller: 7.0.7

hru

Hallo,
ich habe doch noch eine Bitte;-)
Kann mir bitte jemand erklären, was das für Fehlermeldungen sind und wie ich die abstellen kann?

hru@pinas:~ $ journalctl -p err -b
Dec 30 14:39:00 pinas systemd[1]: syslog.socket: Socket service syslog.service not loaded, refusing.
Dec 30 14:39:00 pinas systemd[1]: Failed to listen on syslog.socket - Syslog Socket.
Dec 30 14:39:00 pinas systemd-modules-load[346]: Failed to find module 'softdog'
Dec 30 14:39:03 pinas connmand[857]: The name net.connman.vpn was not provided by any .service files
Dec 30 14:39:38 pinas connmand[857]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 30 14:39:38 pinas connmand[857]: Failed to find URL:http://ipv4.connman.net/online/status.html
Dec 30 14:39:41 pinas connmand[857]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 14:39:42 pinas connmand[857]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 14:39:42 pinas smbd[1535]: [2025/12/30 14:39:42.546725,  0] ../../source3/smbd/server.c:1741(main)
Dec 30 14:39:42 pinas smbd[1535]:   smbd version 4.17.12-Debian started.
Dec 30 14:39:42 pinas smbd[1535]:   Copyright Andrew Tridgell and the Samba Team 1992-2022
Dec 30 14:39:45 pinas systemd[1]: Failed to start lighttpd.service - Lighttpd Daemon.
Dec 30 14:39:46 pinas connmand[857]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 14:39:50 pinas systemd[1]: Failed to start syncthing@syncthing.service - Syncthing - Open Source Continuous File Synchronization for syncthing.
hru@pinas:~ $

Vielen Dank vorab für Eure Hilfe!

Gruß Hartmut

Thomas Braun

@hru

In deinen Paketquellen herrscht Chaos. Kommt wohl vom OMV. Keine Ahnung was der da treibt.
Würde ich auch mal sauber in Version 8 installieren.

Dein OS musst du auf Debian 13 'Trixie' heben.

was das für Fehlermeldungen sind und wie ich die abstellen kann?

connman ist ein Netzwerkmanager. Schleppt vermutlich OMV an, auf einem Standard RaspberryOS wird der nicht verwendet.

Andreios

@hru Ich habe mehrere Raspi laufen, dabei einer exklusiv für ioBroker.
Es hat sich gezeigt, dass es gut ist, Monitor und Tastatur bei Bedarf zur Hand zu haben.
Ich habe die Tage den Raspi nicht mehr erreicht, weil der durch einen (oder 2?) zusätzlich aktivierten Adapter auf einmal voll ausgelastet war und per SSH nicht mehr erreichbar.
Da konnte ich zum Glück direkt beim Start an der Konsole den Adapter deaktivieren und damit hat sich das Problem erst einmal gelöst.
Bei Gelegenheit muss ich jetzt einmal schauen, welcher von beiden da das Problem macht, roborock oder ring!

hru

@Andreios sagte in ioBroker nicht mehr erreichbar:

Es hat sich gezeigt, dass es gut ist, Monitor und Tastatur bei Bedarf zur Hand zu haben

Hallo,
ja da hast Du Recht.
Ich werde wohl den Monitor und die Tastatur am Raspi dran lassen, um schnell reagieren zu können.
Gruß Hartmut

hru

@Thomas-Braun sagte in ioBroker nicht mehr erreichbar:

Dein OS musst du auf Debian 13 'Trixie' heben.

Hallo,
ok das sieht mir nach mehreren einzeln durchzuführenden Steps.
Wie genau mache ich denn das Update auf Debian 13?
Macht man das über die Konsole?
Läuft dann der ioBroker und das OMV auch noch?
Danke und Gruß
Hartmut

Thomas Braun

@hru

https://forum.iobroker.net/topic/81187/upgrade-von-debian-12-bookworm-auf-debian-13-trixie

Inwieweit da OMV wie genau zu berücksichtigen ist kann ich dir aber nicht sagen, da ich das nicht verwende.

hru

Hallo,
ich habe auf Debian 13 (Trixie) aktualisiert.
Jetzt habe ich die Folgenden Meldungen.

hru@pinas:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 13 (trixie)
Release:        13
Codename:       trixie
hru@pinas:~ $ journalctl -p err -b
Dec 30 17:03:43 pinas systemd[1]: syslog.socket: Socket service syslog.service not loaded, refusing.
Dec 30 17:03:43 pinas systemd[1]: Failed to listen on syslog.socket - Syslog Socket.
Dec 30 17:03:43 pinas systemd-modules-load[312]: Failed to find module 'softdog'
Dec 30 17:03:44 pinas systemd-udevd[378]: /usr/lib/udev/rules.d/90-alsa-restore.rules:18 GOTO="alsa_restore_std" has no matching label, ignoring.
Dec 30 17:03:44 pinas systemd-udevd[378]: /usr/lib/udev/rules.d/90-alsa-restore.rules:22 GOTO="alsa_restore_std" has no matching label, ignoring.
Dec 30 17:03:44 pinas connmand[871]: The name net.connman.vpn was not provided by any .service files
Dec 30 17:04:29 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:29 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:04:30 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:30 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:04:30 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:30 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:04:31 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:31 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:04:34 pinas systemd[1]: Failed to start lighttpd.service - Lighttpd Daemon.
Dec 30 17:04:35 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:35 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:04:36 pinas systemd[1]: Failed to start syncthing@syncthing.service - Syncthing - Open Source Continuous File Synchronization for syncthing.
Dec 30 17:04:44 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:04:44 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:05:00 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:05:00 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:05:25 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:05:25 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:06:01 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:06:01 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
Dec 30 17:06:50 pinas connmand[871]: Failed to find URL:http://ipv6.connman.net/online/status.html
Dec 30 17:06:50 pinas connmand[871]: No valid proxy with proxy auto-configuration (PAC) URL http://wpad.fritz.box/wpad.dat for end0 [ ethernet ] online check URL http://ipv6.connman.net>
hru@pinas:~ $

Welche davon sind "böse" und müssen beseitigt werden?

Danke vorab für Eure Unterstützung.
Gruß Hartmut

Thomas Braun

@hru sagte in ioBroker nicht mehr erreichbar:

Welche davon sind "böse" und müssen beseitigt werden?

Die kommen alle aus der OMV-Ecke. Frag da mal nach.

hru

ok ich habe connman deinstalliert

sudo apt purge connman

(weil OMV den gar nicht verwendet, war vermutlich noch aus Zeiten von solaranzeige an Bord).
Jetzt sind die connman-Fehler weg.
Allerdings komme ich jetzt nicht mehr per ssh auf den Raspi;-(
Hölzchen- Stöckchen...

Community Forum

NEWS

ioBroker nicht mehr erreichbar

Support us

359

32.5k

81.9k

1.3m