NEWS
Zigbee Adaper läuft nicht
ioBroker Allgemein
37
Beiträge
8
Kommentatoren
1.1k
Aufrufe
6
Watching
-
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
admin@raspberrypi:~ $ node -v v20.19.1 admin@raspberrypi:~ $ sudo apt-get install nodejs Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be upgraded: nodejs 1 upgraded, 0 newly installed, 0 to remove and 162 not upgraded. Need to get 31.0 MB of archives. After this operation, 439 kB disk space will be freed. Get:1 https://deb.nodesource.com/node_20.x nodistro/main arm64 nodejs arm64 20.19.5-1nodesource1 [31.0 MB] Fetched 31.0 MB in 3s (8,905 kB/s) Reading changelogs... Done (Reading database ... 69029 files and directories currently installed.) Preparing to unpack .../nodejs_20.19.5-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (20.19.5-1nodesource1) over (20.19.1-1nodesource1) ... Setting up nodejs (20.19.5-1nodesource1) ... Processing triggers for man-db (2.11.2-2) ... admin@raspberrypi:~ $ node -v v20.19.5 admin@raspberrypi:~ $@sascha-0 sagte in Zigbee Adaper läuft nicht:
Das hier war nicht erfolgrich
Das macht man auch nicht "von Hand" sondern per
iob nodejs-update 22 -
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
admin@raspberrypi:~ $ node -v v20.19.1 admin@raspberrypi:~ $ sudo apt-get install nodejs Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be upgraded: nodejs 1 upgraded, 0 newly installed, 0 to remove and 162 not upgraded. Need to get 31.0 MB of archives. After this operation, 439 kB disk space will be freed. Get:1 https://deb.nodesource.com/node_20.x nodistro/main arm64 nodejs arm64 20.19.5-1nodesource1 [31.0 MB] Fetched 31.0 MB in 3s (8,905 kB/s) Reading changelogs... Done (Reading database ... 69029 files and directories currently installed.) Preparing to unpack .../nodejs_20.19.5-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (20.19.5-1nodesource1) over (20.19.1-1nodesource1) ... Setting up nodejs (20.19.5-1nodesource1) ... Processing triggers for man-db (2.11.2-2) ... admin@raspberrypi:~ $ node -v v20.19.5 admin@raspberrypi:~ $ -
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
admin@raspberrypi:~ $ node -v v20.19.1 admin@raspberrypi:~ $ sudo apt-get install nodejs Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages will be upgraded: nodejs 1 upgraded, 0 newly installed, 0 to remove and 162 not upgraded. Need to get 31.0 MB of archives. After this operation, 439 kB disk space will be freed. Get:1 https://deb.nodesource.com/node_20.x nodistro/main arm64 nodejs arm64 20.19.5-1nodesource1 [31.0 MB] Fetched 31.0 MB in 3s (8,905 kB/s) Reading changelogs... Done (Reading database ... 69029 files and directories currently installed.) Preparing to unpack .../nodejs_20.19.5-1nodesource1_arm64.deb ... Detected old npm client, removing... Unpacking nodejs (20.19.5-1nodesource1) over (20.19.1-1nodesource1) ... Setting up nodejs (20.19.5-1nodesource1) ... Processing triggers for man-db (2.11.2-2) ... admin@raspberrypi:~ $ node -v v20.19.5 admin@raspberrypi:~ $@sascha-0 sagte in Zigbee Adaper läuft nicht:
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
Wenn du damit fertig bist (oder aufgegeben hast) den Unterbau zu aktualisieren, und der Fehler noch da ist (wovon ich fest ausgehe) solltest du prüfen welcher Prozess die serielle Schnittstelle blockiert. Ein
lsof | grep -e usb-Itead_Sonoff_Zigbeesollte dich da weiter bringen.Zusätzlich macht es ggf. Sinn statt
Start/Stopzu nutzen zunächst einmal sicher zu stellen das die Schnittstelle frei ist. Dazu gibt es diesen Button
. Der sollte Dir sagen ob der Port frei ist oder nicht. Solange der nicht sagt das alles frei ist macht es auch keinen Sinn via Start/Stopetwas zu machen.A.
-
@sascha-0 sagte in Zigbee Adaper läuft nicht:
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
Wenn du damit fertig bist (oder aufgegeben hast) den Unterbau zu aktualisieren, und der Fehler noch da ist (wovon ich fest ausgehe) solltest du prüfen welcher Prozess die serielle Schnittstelle blockiert. Ein
lsof | grep -e usb-Itead_Sonoff_Zigbeesollte dich da weiter bringen.Zusätzlich macht es ggf. Sinn statt
Start/Stopzu nutzen zunächst einmal sicher zu stellen das die Schnittstelle frei ist. Dazu gibt es diesen Button . Der sollte Dir sagen ob der Port frei ist oder nicht. Solange der nicht sagt das alles frei ist macht es auch keinen Sinn via Start/Stopetwas zu machen.A.
@asgothian said in Zigbee Adaper läuft nicht:
So habe jetzt alles Upgedated und keinen Erfolg gehabt.
Das kommt bei Test Port:
reading access rights for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 read and write access available for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Und das hier bei Start/Stop:
overriding zigbee options with: extPanID : a019c6b597d65071 panID : 8820 channel : 15 port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 adapterType : zstack baudRate : 115200 precfgkey : 01030507090B0D0F00020406080A0C0D flowCTRL : false Starting Adapter npm ... Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1) Starting zigbee-herdsman... Unable to obtain herdsman settings Starting zigbee-herdsman problem : Error Resource temporarily unavailable Cannot lock port Failed to start Zigbee: no message given```Der andere Befehl bring das hier:
admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee -bash: lsof: command not found -
@sascha-0 sagte in Zigbee Adaper läuft nicht:
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
Wenn du damit fertig bist (oder aufgegeben hast) den Unterbau zu aktualisieren, und der Fehler noch da ist (wovon ich fest ausgehe) solltest du prüfen welcher Prozess die serielle Schnittstelle blockiert. Ein
lsof | grep -e usb-Itead_Sonoff_Zigbeesollte dich da weiter bringen.Zusätzlich macht es ggf. Sinn statt
Start/Stopzu nutzen zunächst einmal sicher zu stellen das die Schnittstelle frei ist. Dazu gibt es diesen Button . Der sollte Dir sagen ob der Port frei ist oder nicht. Solange der nicht sagt das alles frei ist macht es auch keinen Sinn via Start/Stopetwas zu machen.A.
So die ganze Mühle ist aktualisiert und iob diag bringt das hier:
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.25+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 09:37:11 up 1:53, 2 users, load average: 2.33, 2.90, 2.84 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Thu 2025-10-23 09:37:11 CEST Universal time: Thu 2025-10-23 07:37:11 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 116M 352K 384M 421M Swap: 536M 484M 52M Total: 2.5G 2.0G 168M Active iob-Instances: 21 1846 M total memory 1444 M used memory 990 M active memory 524 M inactive memory 111 M free memory 28 M buffer memory 338 M swap cache 511 M total swap 462 M used swap 49 M free swap *** top - Table Of Processes *** top - 09:37:12 up 1:53, 2 users, load average: 2.33, 2.90, 2.84 Tasks: 196 total, 2 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 22.2 us, 33.3 sy, 0.0 ni, 33.3 id, 0.0 wa, 0.0 hi, 11.1 si, 0.0 st MiB Mem : 1846.3 total, 111.3 free, 1444.3 used, 367.2 buff/cache MiB Swap: 512.0 total, 49.7 free, 462.3 used. 402.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 659M 0 659M 0% /dev tmpfs tmpfs 185M 4.3M 181M 3% /run /dev/mmcblk0p2 ext4 115G 17G 93G 16% / tmpfs tmpfs 924M 0 924M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 58M 453M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none. [Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 951M /var/ 270M /var/cache 264M /var/cache/apt 168M /var/lib 151M /var/cache/apt/archives Archived and active journals take up 3.1M in the file system. /opt/iobroker/backups: 160M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 11G /opt/iobroker/iobroker-data/ioBroker_History 11G /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 100M /opt/iobroker/iobroker-data/sonosCache The five largest files in iobroker-data are: 29M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 18M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js 11M /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json 11M /opt/iobroker/iobroker-data/ioBroker_History/20250613/history.0_userdata.0.PV.Stromverbrauch_aktuell.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 1504) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled system.adapter.go-e.0 : go-e : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.matter.0 : matter : raspberrypi - disabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.operating-hours.0 : operating-hours : raspberrypi - disabled + system.adapter.pushsafer.0 : pushsafer : raspberrypi - enabled system.adapter.pvforecast.0 : pvforecast : raspberrypi - disabled system.adapter.roborock.0 : roborock : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : raspberrypi - enabled + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "go-e" : 1.0.41 , installed 1.0.41 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.5 , installed 0.5.5 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "operating-hours": 1.3.0 , installed 1.3.0 Adapter "pushsafer" : 1.1.0 , installed 1.1.0 Adapter "pvforecast" : 5.0.0 , installed 5.0.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartgarden" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Objects and States Please stand by - This may take a while Objects: 6967 States: 5721 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:45649 0.0.0.0:* LISTEN 1001 83667 38354/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 83258 38026/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 82405 38026/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 73227 30450/sshd: /usr/sb tcp 0 0 192.168.10.13:8100 0.0.0.0:* LISTEN 1001 83671 38395/io.doorbird.0 tcp6 0 0 :::8087 :::* LISTEN 1001 85385 38455/io.simple-api tcp6 0 0 :::8082 :::* LISTEN 1001 86134 38500/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 79792 38048/io.admin.0 tcp6 0 0 :::3500 :::* LISTEN 1001 84206 38298/io.sonos.0 tcp6 0 0 :::22 :::* LISTEN 0 73229 30450/sshd: /usr/sb tcp6 0 0 :::40033 :::* LISTEN 1001 83666 38354/io.yahka.0 udp 0 0 0.0.0.0:53381 0.0.0.0:* 104 6399 456/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6397 456/avahi-daemon: r udp 0 0 0.0.0.0:41727 0.0.0.0:* 1001 82677 38267/io.openknx.0 udp6 0 0 :::5353 :::* 104 6398 456/avahi-daemon: r udp6 0 0 fe80::83ef:c731:b6f:546 :::* 0 6487 533/NetworkManager udp6 0 0 :::50840 :::* 104 6400 456/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-10-23 09:38:09.131 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44447 2025-10-23 09:38:09.200 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:09.200 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:09.819 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44820 2025-10-23 09:38:13.662 - info: sayit.0 (44820) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 09:38:13.903 - info: sayit.0 (44820) Upload announce mp3 files 2025-10-23 09:38:14.055 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 09:38:14.060 - info: sayit.0 (44820) stopping... 2025-10-23 09:38:14.567 - info: sayit.0 (44820) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 09:38:15.056 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44820 2025-10-23 09:38:15.122 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:15.123 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:15.719 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44853 2025-10-23 09:38:18.288 - info: zigbee.0 (38369) Unable to obtain herdsman settings 2025-10-23 09:38:19.416 - error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) 2025-10-23 09:38:19.417 - error: zigbee.0 (38369) Failed to start Zigbee: no message given 2025-10-23 09:38:23.321 - info: sayit.0 (44853) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 09:38:23.510 - info: sayit.0 (44853) Upload announce mp3 files 2025-10-23 09:38:23.560 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 09:38:23.570 - info: sayit.0 (44853) stopping... 2025-10-23 09:38:24.077 - info: sayit.0 (44853) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 09:38:24.561 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44853 2025-10-23 09:38:24.634 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:24.634 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:25.635 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 45243 -
So die ganze Mühle ist aktualisiert und iob diag bringt das hier:
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.25+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 09:37:11 up 1:53, 2 users, load average: 2.33, 2.90, 2.84 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Thu 2025-10-23 09:37:11 CEST Universal time: Thu 2025-10-23 07:37:11 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 116M 352K 384M 421M Swap: 536M 484M 52M Total: 2.5G 2.0G 168M Active iob-Instances: 21 1846 M total memory 1444 M used memory 990 M active memory 524 M inactive memory 111 M free memory 28 M buffer memory 338 M swap cache 511 M total swap 462 M used swap 49 M free swap *** top - Table Of Processes *** top - 09:37:12 up 1:53, 2 users, load average: 2.33, 2.90, 2.84 Tasks: 196 total, 2 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 22.2 us, 33.3 sy, 0.0 ni, 33.3 id, 0.0 wa, 0.0 hi, 11.1 si, 0.0 st MiB Mem : 1846.3 total, 111.3 free, 1444.3 used, 367.2 buff/cache MiB Swap: 512.0 total, 49.7 free, 462.3 used. 402.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 659M 0 659M 0% /dev tmpfs tmpfs 185M 4.3M 181M 3% /run /dev/mmcblk0p2 ext4 115G 17G 93G 16% / tmpfs tmpfs 924M 0 924M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 58M 453M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none. [Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 951M /var/ 270M /var/cache 264M /var/cache/apt 168M /var/lib 151M /var/cache/apt/archives Archived and active journals take up 3.1M in the file system. /opt/iobroker/backups: 160M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 11G /opt/iobroker/iobroker-data/ioBroker_History 11G /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 100M /opt/iobroker/iobroker-data/sonosCache The five largest files in iobroker-data are: 29M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 18M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js 11M /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json 11M /opt/iobroker/iobroker-data/ioBroker_History/20250613/history.0_userdata.0.PV.Stromverbrauch_aktuell.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 1504) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled system.adapter.go-e.0 : go-e : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.matter.0 : matter : raspberrypi - disabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.operating-hours.0 : operating-hours : raspberrypi - disabled + system.adapter.pushsafer.0 : pushsafer : raspberrypi - enabled system.adapter.pvforecast.0 : pvforecast : raspberrypi - disabled system.adapter.roborock.0 : roborock : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : raspberrypi - enabled + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "go-e" : 1.0.41 , installed 1.0.41 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.5 , installed 0.5.5 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "operating-hours": 1.3.0 , installed 1.3.0 Adapter "pushsafer" : 1.1.0 , installed 1.1.0 Adapter "pvforecast" : 5.0.0 , installed 5.0.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartgarden" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Objects and States Please stand by - This may take a while Objects: 6967 States: 5721 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:45649 0.0.0.0:* LISTEN 1001 83667 38354/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 83258 38026/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 82405 38026/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 73227 30450/sshd: /usr/sb tcp 0 0 192.168.10.13:8100 0.0.0.0:* LISTEN 1001 83671 38395/io.doorbird.0 tcp6 0 0 :::8087 :::* LISTEN 1001 85385 38455/io.simple-api tcp6 0 0 :::8082 :::* LISTEN 1001 86134 38500/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 79792 38048/io.admin.0 tcp6 0 0 :::3500 :::* LISTEN 1001 84206 38298/io.sonos.0 tcp6 0 0 :::22 :::* LISTEN 0 73229 30450/sshd: /usr/sb tcp6 0 0 :::40033 :::* LISTEN 1001 83666 38354/io.yahka.0 udp 0 0 0.0.0.0:53381 0.0.0.0:* 104 6399 456/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6397 456/avahi-daemon: r udp 0 0 0.0.0.0:41727 0.0.0.0:* 1001 82677 38267/io.openknx.0 udp6 0 0 :::5353 :::* 104 6398 456/avahi-daemon: r udp6 0 0 fe80::83ef:c731:b6f:546 :::* 0 6487 533/NetworkManager udp6 0 0 :::50840 :::* 104 6400 456/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-10-23 09:38:09.131 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44447 2025-10-23 09:38:09.200 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:09.200 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:09.819 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44820 2025-10-23 09:38:13.662 - info: sayit.0 (44820) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 09:38:13.903 - info: sayit.0 (44820) Upload announce mp3 files 2025-10-23 09:38:14.055 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 09:38:14.060 - info: sayit.0 (44820) stopping... 2025-10-23 09:38:14.567 - info: sayit.0 (44820) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 09:38:15.056 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44820 2025-10-23 09:38:15.122 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:15.123 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:15.719 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44853 2025-10-23 09:38:18.288 - info: zigbee.0 (38369) Unable to obtain herdsman settings 2025-10-23 09:38:19.416 - error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) 2025-10-23 09:38:19.417 - error: zigbee.0 (38369) Failed to start Zigbee: no message given 2025-10-23 09:38:23.321 - info: sayit.0 (44853) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 09:38:23.510 - info: sayit.0 (44853) Upload announce mp3 files 2025-10-23 09:38:23.560 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 09:38:23.570 - info: sayit.0 (44853) stopping... 2025-10-23 09:38:24.077 - info: sayit.0 (44853) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 09:38:24.561 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44853 2025-10-23 09:38:24.634 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 09:38:24.634 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 09:38:25.635 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 45243@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?
-
@asgothian said in Zigbee Adaper läuft nicht:
So habe jetzt alles Upgedated und keinen Erfolg gehabt.
Das kommt bei Test Port:
reading access rights for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 read and write access available for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Und das hier bei Start/Stop:
overriding zigbee options with: extPanID : a019c6b597d65071 panID : 8820 channel : 15 port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 adapterType : zstack baudRate : 115200 precfgkey : 01030507090B0D0F00020406080A0C0D flowCTRL : false Starting Adapter npm ... Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1) Starting zigbee-herdsman... Unable to obtain herdsman settings Starting zigbee-herdsman problem : Error Resource temporarily unavailable Cannot lock port Failed to start Zigbee: no message given```Der andere Befehl bring das hier:
admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee -bash: lsof: command not found@sascha-0 sagte in Zigbee Adaper läuft nicht:
-bash: lsof: command not found
Mit
sudo apt install lsofdas Programm nachinstallieren.
-
@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?
@thomas-braun sagte in Zigbee Adaper läuft nicht:
Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?
Eher nein - Dieser Test nutzt die gleichen Einstellungen:
@sascha-0 sagte in Zigbee Adaper läuft nicht:
Das kommt bei Test Port:
reading access rights for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 > read and write access available for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 -
@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?
@thomas-braun said in Zigbee Adaper läuft nicht:
@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?
Dahinter ist kein Leerzeichen, dazwischen kann ich keine Unterschiede sehen.
-
@sascha-0 sagte in Zigbee Adaper läuft nicht:
@thomas-braun said in Zigbee Adaper läuft nicht:
Erste Maßnahme:
Kiste updaten und dann nodejs22 installieren.
Wie geht das? Das hier war nicht erfolgrich:
Wenn du damit fertig bist (oder aufgegeben hast) den Unterbau zu aktualisieren, und der Fehler noch da ist (wovon ich fest ausgehe) solltest du prüfen welcher Prozess die serielle Schnittstelle blockiert. Ein
lsof | grep -e usb-Itead_Sonoff_Zigbeesollte dich da weiter bringen.Zusätzlich macht es ggf. Sinn statt
Start/Stopzu nutzen zunächst einmal sicher zu stellen das die Schnittstelle frei ist. Dazu gibt es diesen Button . Der sollte Dir sagen ob der Port frei ist oder nicht. Solange der nicht sagt das alles frei ist macht es auch keinen Sinn via Start/Stopetwas zu machen.A.
@asgothian said in Zigbee Adaper läuft nicht:
Ein lsof | grep -e usb-Itead_Sonoff_Zigbee sollte dich da weiter bringen.
Das liefert nix erkennbares:
admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee admin@raspberrypi:~ $ -
@asgothian said in Zigbee Adaper läuft nicht:
Ein lsof | grep -e usb-Itead_Sonoff_Zigbee sollte dich da weiter bringen.
Das liefert nix erkennbares:
admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee admin@raspberrypi:~ $error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.
-
error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.
@thomas-braun said in Zigbee Adaper läuft nicht:
error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.
Hab ich gemacht, der Sonoff Flasher hat auch eine aktuellere Version gefunden.
Das Ergebnis ist gleich:overriding zigbee options with: extPanID : a019c6b597d65071 panID : 8820 channel : 15 port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 adapterType : zstack baudRate : 115200 precfgkey : 01030507090B0D0F00020406080A0C0D flowCTRL : false Starting Adapter npm ... Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1) Starting zigbee-herdsman... Unable to obtain herdsman settings Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) Failed to start Zigbee: no message givenHier noch der neueste Diag:
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.25+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:24:08 up 5:40, 2 users, load average: 2.96, 2.98, 2.68 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Thu 2025-10-23 13:24:09 CEST Universal time: Thu 2025-10-23 11:24:09 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 155M 1.5M 316M 398M Swap: 536M 536M 327K Total: 2.5G 2.1G 155M Active iob-Instances: 21 1846 M total memory 1466 M used memory 658 M active memory 844 M inactive memory 147 M free memory 25 M buffer memory 277 M swap cache 511 M total swap 511 M used swap 0 M free swap *** top - Table Of Processes *** top - 13:24:09 up 5:40, 2 users, load average: 2.96, 2.98, 2.68 Tasks: 201 total, 4 running, 197 sleeping, 0 stopped, 0 zombie %Cpu(s): 62.5 us, 12.5 sy, 0.0 ni, 25.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 1846.3 total, 146.0 free, 1467.7 used, 302.3 buff/cache MiB Swap: 512.0 total, 0.3 free, 511.7 used. 378.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 659M 0 659M 0% /dev tmpfs tmpfs 185M 4.3M 181M 3% /run /dev/mmcblk0p2 ext4 115G 17G 93G 16% / tmpfs tmpfs 924M 0 924M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 58M 453M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none. [Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 951M /var/ 270M /var/cache 264M /var/cache/apt 168M /var/lib 151M /var/cache/apt/archives Archived and active journals take up 3.1M in the file system. /opt/iobroker/backups: 160M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 11G /opt/iobroker/iobroker-data/ioBroker_History 11G /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 100M /opt/iobroker/iobroker-data/sonosCache The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 18M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js 16M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 15113) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled system.adapter.go-e.0 : go-e : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.matter.0 : matter : raspberrypi - disabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.operating-hours.0 : operating-hours : raspberrypi - disabled + system.adapter.pushsafer.0 : pushsafer : raspberrypi - enabled system.adapter.pvforecast.0 : pvforecast : raspberrypi - disabled system.adapter.roborock.0 : roborock : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : raspberrypi - enabled + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "go-e" : 1.0.41 , installed 1.0.41 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.5 , installed 0.5.5 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "operating-hours": 1.3.0 , installed 1.3.0 Adapter "pushsafer" : 1.1.0 , installed 1.1.0 Adapter "pvforecast" : 5.0.0 , installed 5.0.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartgarden" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Objects and States Please stand by - This may take a while Objects: 6967 States: 5721 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:45649 0.0.0.0:* LISTEN 1001 83667 38354/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 83258 38026/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 82405 38026/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 73227 30450/sshd: /usr/sb tcp 0 0 192.168.10.13:8100 0.0.0.0:* LISTEN 1001 83671 38395/io.doorbird.0 tcp6 0 0 :::8087 :::* LISTEN 1001 85385 38455/io.simple-api tcp6 0 0 :::8082 :::* LISTEN 1001 86134 38500/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 79792 38048/io.admin.0 tcp6 0 0 :::3500 :::* LISTEN 1001 84206 38298/io.sonos.0 tcp6 0 0 :::22 :::* LISTEN 0 73229 30450/sshd: /usr/sb tcp6 0 0 :::40033 :::* LISTEN 1001 83666 38354/io.yahka.0 udp 0 0 0.0.0.0:53381 0.0.0.0:* 104 6399 456/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6397 456/avahi-daemon: r udp 0 0 0.0.0.0:41727 0.0.0.0:* 1001 82677 38267/io.openknx.0 udp6 0 0 :::5353 :::* 104 6398 456/avahi-daemon: r udp6 0 0 fe80::83ef:c731:b6f:546 :::* 0 6487 533/NetworkManager udp6 0 0 :::50840 :::* 104 6400 456/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-10-23 13:25:07.973 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:07.994 - info: sayit.0 (89581) stopping... 2025-10-23 13:25:08.501 - info: sayit.0 (89581) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:08.974 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89581 2025-10-23 13:25:09.037 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:09.037 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:09.716 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89939 2025-10-23 13:25:13.597 - info: sayit.0 (89939) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 13:25:13.736 - info: sayit.0 (89939) Upload announce mp3 files 2025-10-23 13:25:13.772 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:13.794 - info: sayit.0 (89939) stopping... 2025-10-23 13:25:14.300 - info: sayit.0 (89939) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:14.775 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89939 2025-10-23 13:25:14.837 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:14.837 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:15.947 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89989 2025-10-23 13:25:21.223 - info: sayit.0 (89989) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 13:25:21.392 - info: sayit.0 (89989) Upload announce mp3 files 2025-10-23 13:25:21.443 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:21.452 - info: sayit.0 (89989) stopping... 2025-10-23 13:25:21.958 - info: sayit.0 (89989) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:22.445 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89989 2025-10-23 13:25:22.514 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:22.516 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:23.120 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 90378Was bedeutet eigentlich?
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ich kann übrigens immer noch kein COM-Anschlussname auswählen, sondern muss das aus dem Diag reinkopieren.
-
@thomas-braun said in Zigbee Adaper läuft nicht:
error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.
Hab ich gemacht, der Sonoff Flasher hat auch eine aktuellere Version gefunden.
Das Ergebnis ist gleich:overriding zigbee options with: extPanID : a019c6b597d65071 panID : 8820 channel : 15 port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 adapterType : zstack baudRate : 115200 precfgkey : 01030507090B0D0F00020406080A0C0D flowCTRL : false Starting Adapter npm ... Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1) Starting zigbee-herdsman... Unable to obtain herdsman settings Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) Failed to start Zigbee: no message givenHier noch der neueste Diag:
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.25+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:24:08 up 5:40, 2 users, load average: 2.96, 2.98, 2.68 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Thu 2025-10-23 13:24:09 CEST Universal time: Thu 2025-10-23 11:24:09 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 155M 1.5M 316M 398M Swap: 536M 536M 327K Total: 2.5G 2.1G 155M Active iob-Instances: 21 1846 M total memory 1466 M used memory 658 M active memory 844 M inactive memory 147 M free memory 25 M buffer memory 277 M swap cache 511 M total swap 511 M used swap 0 M free swap *** top - Table Of Processes *** top - 13:24:09 up 5:40, 2 users, load average: 2.96, 2.98, 2.68 Tasks: 201 total, 4 running, 197 sleeping, 0 stopped, 0 zombie %Cpu(s): 62.5 us, 12.5 sy, 0.0 ni, 25.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 1846.3 total, 146.0 free, 1467.7 used, 302.3 buff/cache MiB Swap: 512.0 total, 0.3 free, 511.7 used. 378.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 659M 0 659M 0% /dev tmpfs tmpfs 185M 4.3M 181M 3% /run /dev/mmcblk0p2 ext4 115G 17G 93G 16% / tmpfs tmpfs 924M 0 924M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 58M 453M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none. [Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 951M /var/ 270M /var/cache 264M /var/cache/apt 168M /var/lib 151M /var/cache/apt/archives Archived and active journals take up 3.1M in the file system. /opt/iobroker/backups: 160M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 11G /opt/iobroker/iobroker-data/ioBroker_History 11G /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 100M /opt/iobroker/iobroker-data/sonosCache The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 18M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js 16M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 15113) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.discovery.0 : discovery : raspberrypi - disabled + system.adapter.doorbird.0 : doorbird : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled system.adapter.go-e.0 : go-e : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.matter.0 : matter : raspberrypi - disabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.openknx.0 : openknx : raspberrypi - enabled system.adapter.operating-hours.0 : operating-hours : raspberrypi - disabled + system.adapter.pushsafer.0 : pushsafer : raspberrypi - enabled system.adapter.pvforecast.0 : pvforecast : raspberrypi - disabled system.adapter.roborock.0 : roborock : raspberrypi - disabled system.adapter.sayit.0 : sayit : raspberrypi - enabled system.adapter.schoolfree.0 : schoolfree : raspberrypi - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : raspberrypi - enabled + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "devices" : 1.2.8 , installed 1.2.8 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "followthesun" : 0.5.2 , installed 0.5.2 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "go-e" : 1.0.41 , installed 1.0.41 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.5 , installed 0.5.5 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "operating-hours": 1.3.0 , installed 1.3.0 Adapter "pushsafer" : 1.1.0 , installed 1.1.0 Adapter "pvforecast" : 5.0.0 , installed 5.0.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "schoolfree" : 1.1.12 , installed 1.1.12 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartgarden" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Objects and States Please stand by - This may take a while Objects: 6967 States: 5721 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:45649 0.0.0.0:* LISTEN 1001 83667 38354/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 83258 38026/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 82405 38026/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 73227 30450/sshd: /usr/sb tcp 0 0 192.168.10.13:8100 0.0.0.0:* LISTEN 1001 83671 38395/io.doorbird.0 tcp6 0 0 :::8087 :::* LISTEN 1001 85385 38455/io.simple-api tcp6 0 0 :::8082 :::* LISTEN 1001 86134 38500/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 79792 38048/io.admin.0 tcp6 0 0 :::3500 :::* LISTEN 1001 84206 38298/io.sonos.0 tcp6 0 0 :::22 :::* LISTEN 0 73229 30450/sshd: /usr/sb tcp6 0 0 :::40033 :::* LISTEN 1001 83666 38354/io.yahka.0 udp 0 0 0.0.0.0:53381 0.0.0.0:* 104 6399 456/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6397 456/avahi-daemon: r udp 0 0 0.0.0.0:41727 0.0.0.0:* 1001 82677 38267/io.openknx.0 udp6 0 0 :::5353 :::* 104 6398 456/avahi-daemon: r udp6 0 0 fe80::83ef:c731:b6f:546 :::* 0 6487 533/NetworkManager udp6 0 0 :::50840 :::* 104 6400 456/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-10-23 13:25:07.973 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:07.994 - info: sayit.0 (89581) stopping... 2025-10-23 13:25:08.501 - info: sayit.0 (89581) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:08.974 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89581 2025-10-23 13:25:09.037 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:09.037 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:09.716 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89939 2025-10-23 13:25:13.597 - info: sayit.0 (89939) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 13:25:13.736 - info: sayit.0 (89939) Upload announce mp3 files 2025-10-23 13:25:13.772 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:13.794 - info: sayit.0 (89939) stopping... 2025-10-23 13:25:14.300 - info: sayit.0 (89939) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:14.775 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89939 2025-10-23 13:25:14.837 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:14.837 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:15.947 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89989 2025-10-23 13:25:21.223 - info: sayit.0 (89989) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7 2025-10-23 13:25:21.392 - info: sayit.0 (89989) Upload announce mp3 files 2025-10-23 13:25:21.443 - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true) 2025-10-23 13:25:21.452 - info: sayit.0 (89989) stopping... 2025-10-23 13:25:21.958 - info: sayit.0 (89989) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-23 13:25:22.445 - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89989 2025-10-23 13:25:22.514 - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL 2025-10-23 13:25:22.516 - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null () 2025-10-23 13:25:23.120 - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 90378Was bedeutet eigentlich?
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0Ich kann übrigens immer noch kein COM-Anschlussname auswählen, sondern muss das aus dem Diag reinkopieren.
Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...
Ansonsten vielleicht die Ausgabe von
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0 frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ -
Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...
Ansonsten vielleicht die Ausgabe von
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0 frigate@ubuntu-frigate-privileged:/media/frigate/recordings$@martinp said in Zigbee Adaper läuft nicht:
Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...
Ansonsten vielleicht die Ausgabe von
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0 frigate@ubuntu-frigate-privileged:/media/frigate/recordings$Wie mache ich das?
-
@martinp said in Zigbee Adaper läuft nicht:
Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...
Ansonsten vielleicht die Ausgabe von
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0 frigate@ubuntu-frigate-privileged:/media/frigate/recordings$Wie mache ich das?
-
@martinp said in Zigbee Adaper läuft nicht:
Steht in der ersten Zeile
In der Kommandozeile eingeben ...
ls -l /dev/serial/by-idDa kommt folgendes:
admin@raspberrypi:~ $ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Oct 23 07:43 usb-1a86_USB2.0-Ser_-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 23 13:18 usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 -> ../../ttyUSB1 admin@raspberrypi:~ $ -
@martinp said in Zigbee Adaper läuft nicht:
Steht in der ersten Zeile
In der Kommandozeile eingeben ...
ls -l /dev/serial/by-idDa kommt folgendes:
admin@raspberrypi:~ $ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Oct 23 07:43 usb-1a86_USB2.0-Ser_-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Oct 23 13:18 usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 -> ../../ttyUSB1 admin@raspberrypi:~ $Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also/dev/ttyUSB0bzw.
/dev/ttyUSB1 -
Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also/dev/ttyUSB0bzw.
/dev/ttyUSB1@thomas-braun sagte in Zigbee Adaper läuft nicht:
Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also/dev/ttyUSB0bzw.
/dev/ttyUSB1Definitiv
/dev/ttuUSB1. Unter/dev/ttyUSB0ist die Firmware nicht erreichbar !Die Meldung
error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)bedeutet das der Adapter die serielle Schnittstelle zwar geöffnet bekommt, nicht aber per Seriellen Befehlen mit der Firmware sprechen kann.
@sascha-0 Ich hab da mal ein paar Fragen:
- Hast du den Stick auf dem Rechner mit Firmware versorgt auf dem du den jetzt auch nutzt ?
- Hast du andere Geräte an anderen USB Ports angeschlossen (wenn ja, welche) (Ziel: NEIN - insbesondere keine SSD / USB3 HDD)
- Hast du eine USB Verlängerung für den Stick benutzt ? (Ziel: JA)
A.
-
Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also/dev/ttyUSB0bzw.
/dev/ttyUSB1@thomas-braun said in Zigbee Adaper läuft nicht:
l das
Leider mit dem gleichen Ergebnis:
overriding zigbee options with: extPanID : a019c6b597d65071 panID : 8820 channel : 15 port : /dev/ttyUSB1 adapterType : zstack baudRate : 115200 precfgkey : 01030507090B0D0F00020406080A0C0D flowCTRL : false Starting Adapter npm ... Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1) Starting zigbee-herdsman... Unable to obtain herdsman settings Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) Failed to start Zigbee: no message given -
@thomas-braun sagte in Zigbee Adaper läuft nicht:
Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also/dev/ttyUSB0bzw.
/dev/ttyUSB1Definitiv
/dev/ttuUSB1. Unter/dev/ttyUSB0ist die Firmware nicht erreichbar !Die Meldung
error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)bedeutet das der Adapter die serielle Schnittstelle zwar geöffnet bekommt, nicht aber per Seriellen Befehlen mit der Firmware sprechen kann.
@sascha-0 Ich hab da mal ein paar Fragen:
- Hast du den Stick auf dem Rechner mit Firmware versorgt auf dem du den jetzt auch nutzt ?
- Hast du andere Geräte an anderen USB Ports angeschlossen (wenn ja, welche) (Ziel: NEIN - insbesondere keine SSD / USB3 HDD)
- Hast du eine USB Verlängerung für den Stick benutzt ? (Ziel: JA)
A.
@asgothian said in Zigbee Adaper läuft nicht:
@sascha-0 Ich hab da mal ein paar Fragen:
Hast du den Stick auf dem Rechner mit Firmware versorgt auf dem du den jetzt auch nutzt ?
Hast du andere Geräte an anderen USB Ports angeschlossen (wenn ja, welche) (Ziel: NEIN - insbesondere keine SSD / USB3 HDD)
Hast du eine USB Verlängerung für den Stick benutzt ? (Ziel: JA)Ich habe das Firmware Update auf meinem Windows PC damit gemacht: https://dongle.sonoff.tech/sonoff-dongle-flasher/
Das andere USB Gerät ist eine Wechselrichter Anbindung mit Modbus.
Klar habe ich eine Verlängerung verwendet, geht ja physisch schon nicht anders.
596
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge