Proxmox WebIf nicht erreichbar
-
nach einem reboot zeigt
ip addrjetzt die passende IP.1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000 link/ether 6c:4b:90:43:c9:19 brd ff:ff:ff:ff:ff:ff 3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 6c:4b:90:43:c9:19 brd ff:ff:ff:ff:ff:ff inet 10.0.1.206/23 scope global vmbr0 valid_lft forever preferred_lft forever inet6 fe80::6e4b:90ff:fe43:c919/64 scope link valid_lft forever preferred_lft foreveraber
https://10.0.1.206:8006/geht trotzdem noch nicht.
dann hab ich mit
nano /etc/network/interfaces:auto vmbr0ein neues File erstellt.iface vmbr0 inet static address 10.0.1.206/23 gateway 10.0.1.1 bridge-ports enp0s31f6 bridge-stp off bridge-fd 0● pveproxy.service - PVE API Proxy Server Loaded: loaded (/lib/systemd/system/pveproxy.service; enabled; vendor preset: enabled) Active: active (running) since Sun 2025-10-12 13:59:51 CEST; 3s ago Process: 1524 ExecStartPre=/usr/bin/pvecm updatecerts --silent (code=exited, status=111) Process: 1525 ExecStart=/usr/bin/pveproxy start (code=exited, status=0/SUCCESS) Main PID: 1527 (pveproxy) Tasks: 4 (limit: 18839) Memory: 132.7M CPU: 943ms CGroup: /system.slice/pveproxy.service ├─1527 pveproxy ├─1528 pveproxy worker ├─1529 pveproxy worker └─1530 pveproxy worker Oct 12 13:59:50 pve pvecm[1524]: Unable to load access control list: Connection refused Oct 12 13:59:51 pve pveproxy[1527]: starting server Oct 12 13:59:51 pve pveproxy[1527]: starting 3 worker(s) Oct 12 13:59:51 pve pveproxy[1527]: worker 1528 started Oct 12 13:59:51 pve pveproxy[1527]: worker 1529 started Oct 12 13:59:51 pve pveproxy[1527]: worker 1530 started Oct 12 13:59:51 pve pveproxy[1528]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 13:59:51 pve systemd[1]: Started PVE API Proxy Server. Oct 12 13:59:51 pve pveproxy[1529]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 13:59:51 pve pveproxy[1530]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917.funktioniert aber auch nicht
-
@negalein sagte in Proxmox WebIf nicht erreichbar:
ip addr & route -n zeiigt aber noch
Weil du nur den proxy und nicht den Netzwerkdienst neu gestartet hast.
@negalein sagte in Proxmox WebIf nicht erreichbar:
aber https://10.0.1.206:8006/ geht trotzdem noch nicht.
Ist die 206 auch frei, oder Vllt schon anderweitig belegt?Gibt's im LOG etwas zu sehen? Ist die Fehlermeldung von oben noch vorhanden?
Möglichkeit wäre noch testhalber von statisch auf DHCP stellen um eventuelle Fehler auszuschließen.
-
@negalein sagte in Proxmox WebIf nicht erreichbar:
failed to load local private
Dann mal doch die etc/hosts anschauen
-
@crunchip sagte in Proxmox WebIf nicht erreichbar:
Weil du nur den proxy und nicht den Netzwerkdienst neu gestartet hast.
ah, deshalb.
Nach reboot hat er die richtige IP gehabt.
Aber GUI geht nicht.Ist die 206 auch frei, oder Vllt schon anderweitig belegt?
Ja, definitiv frei
Gibt's im LOG etwas zu sehen?
wo find ich das?
Ist die Fehlermeldung von oben noch vorhanden?
Ja
Möglichkeit wäre noch testhalber von statisch auf DHCP stellen um eventuelle Fehler auszuschließen.
in der
/etc/network/interfaces:auto?iface vmbr0 inet DHCP address 10.0.1.206/23 gateway 10.0.1.1 bridge-ports enp0s31f6 bridge-stp off bridge-fd 0so?
etc/hosts
127.0.0.1 localhost.localdomain localhost 10.0.1.206 proxmox-3.fritz.box # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts -
@negalein moment, ich geh gleich mal an den Rechner, vom Handy is das immer etwas umständlich.
-
@negalein sagte in Proxmox WebIf nicht erreichbar:
wo find ich das
wie üblich in var/log
/var/log/: Enthält eine Vielzahl von Systemprotokollen, darunter: syslog: Allgemeine Systemmeldungen. auth.log: Authentifizierungsereignisse. syslog-ng: Protokolldateien von Syslog-ng (falls konfiguriert). apt/history.log: Zeigt die History von Paketinstallationen an. /var/log/pve/: Enthält Proxmox-spezifische Logs. /var/log/messages/: Enthält eine Auswahl von Systemmeldungen.allerdings seit proxmox v8(debian12)
abruf mit
z.b.journalctl -fspeziell proxy
journalctl -u pveproxy@negalein sagte in Proxmox WebIf nicht erreichbar:
so?
auto vmbr0 iface vmbr0 inet dhcp bridge-ports enp0s31f6 bridge-stp off bridge-fd 0edit
möglichkeit wäre nochGUI per CLI wieder aktivieren: Falls die Netzumstellungen zu Problemen geführt haben, kann per CLI ein Reset oder eine Reparatur versucht werden:
systemctl restart pve-manageroder
apt-get install --reinstall pve-managerund dann Logs auf Fehler kontrollieren.
edit2
SSL-Zertifikate defekt: Ein defektes Zertifikat kann die Weboberfläche blockieren. Prüfe Logs auf Fehler zu SSL oder Zertifikat. Browser-Cache oder HTTPS erzwingen: Lösche den Browser-Cache oder teste mit einem anderen Browser. -
@crunchip sagte in Proxmox WebIf nicht erreichbar:
systemctl restart pve-manager
Failed to restart pve-manager.service: Operation refused, unit pve-guests.service may be requested by dependency only (it is configured to refuse manual start/stop). See system logs and 'systemctl status pve-manager.service' for details.ct 12 14:53:51 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. Oct 12 14:53:51 pve systemd[1]: Starting The Proxmox VE cluster filesystem... Oct 12 14:53:52 pve pveproxy[3628]: worker exit Oct 12 14:53:52 pve pveproxy[890]: worker 3628 finished Oct 12 14:53:52 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:52 pve pveproxy[890]: worker 3632 started Oct 12 14:53:52 pve pveproxy[3629]: worker exit Oct 12 14:53:52 pve pveproxy[3630]: worker exit Oct 12 14:53:52 pve pveproxy[3632]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:52 pve pveproxy[890]: worker 3629 finished Oct 12 14:53:52 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:52 pve pveproxy[890]: worker 3633 started Oct 12 14:53:52 pve pveproxy[890]: worker 3630 finished Oct 12 14:53:52 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:52 pve pveproxy[890]: worker 3634 started Oct 12 14:53:52 pve pveproxy[3633]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:52 pve pveproxy[3634]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:55 pve pmxcfs[3631]: [main] crit: Unable to get local IP address Oct 12 14:53:55 pve pmxcfs[3631]: [main] crit: Unable to get local IP address Oct 12 14:53:55 pve systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION Oct 12 14:53:55 pve systemd[1]: pve-cluster.service: Failed with result 'exit-code'. Oct 12 14:53:55 pve systemd[1]: Failed to start The Proxmox VE cluster filesystem. Oct 12 14:53:55 pve systemd[1]: Condition check resulted in Corosync Cluster Engine being skipped. Oct 12 14:53:55 pve systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 676. Oct 12 14:53:55 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. Oct 12 14:53:55 pve systemd[1]: Starting The Proxmox VE cluster filesystem... Oct 12 14:53:57 pve pveproxy[3632]: worker exit Oct 12 14:53:57 pve pveproxy[890]: worker 3632 finished Oct 12 14:53:57 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:57 pve pveproxy[890]: worker 3641 started Oct 12 14:53:57 pve pveproxy[3633]: worker exit Oct 12 14:53:57 pve pveproxy[3634]: worker exit Oct 12 14:53:57 pve pveproxy[3641]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:57 pve pveproxy[890]: worker 3633 finished Oct 12 14:53:57 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:57 pve pveproxy[890]: worker 3642 started Oct 12 14:53:57 pve pveproxy[890]: worker 3634 finished Oct 12 14:53:57 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:53:57 pve pveproxy[890]: worker 3643 started Oct 12 14:53:57 pve pveproxy[3642]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:57 pve pveproxy[3643]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:53:59 pve pmxcfs[3635]: [main] crit: Unable to get local IP address Oct 12 14:53:59 pve pmxcfs[3635]: [main] crit: Unable to get local IP address Oct 12 14:53:59 pve systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION Oct 12 14:53:59 pve systemd[1]: pve-cluster.service: Failed with result 'exit-code'. Oct 12 14:53:59 pve systemd[1]: Failed to start The Proxmox VE cluster filesystem. Oct 12 14:53:59 pve systemd[1]: Condition check resulted in Corosync Cluster Engine being skipped. Oct 12 14:53:59 pve systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 677. Oct 12 14:53:59 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. Oct 12 14:53:59 pve systemd[1]: Starting The Proxmox VE cluster filesystem... Oct 12 14:54:01 pve cron[843]: (*system*vzdump) CAN'T OPEN SYMLINK (/etc/cron.d/vzdump) Oct 12 14:54:02 pve pveproxy[3641]: worker exit Oct 12 14:54:02 pve pveproxy[890]: worker 3641 finished Oct 12 14:54:02 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:02 pve pveproxy[890]: worker 3646 started Oct 12 14:54:02 pve pveproxy[3642]: worker exit Oct 12 14:54:02 pve pveproxy[3646]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:02 pve pveproxy[3643]: worker exit Oct 12 14:54:02 pve pveproxy[890]: worker 3642 finished Oct 12 14:54:02 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:02 pve pveproxy[890]: worker 3647 started Oct 12 14:54:02 pve pveproxy[890]: worker 3643 finished Oct 12 14:54:02 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:02 pve pveproxy[890]: worker 3648 started Oct 12 14:54:02 pve pveproxy[3647]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:02 pve pveproxy[3648]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:03 pve pmxcfs[3644]: [main] crit: Unable to get local IP address Oct 12 14:54:03 pve pmxcfs[3644]: [main] crit: Unable to get local IP address Oct 12 14:54:03 pve systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION Oct 12 14:54:03 pve systemd[1]: pve-cluster.service: Failed with result 'exit-code'. Oct 12 14:54:03 pve systemd[1]: Failed to start The Proxmox VE cluster filesystem. Oct 12 14:54:03 pve systemd[1]: Condition check resulted in Corosync Cluster Engine being skipped. Oct 12 14:54:04 pve systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 678. Oct 12 14:54:04 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. Oct 12 14:54:04 pve systemd[1]: Starting The Proxmox VE cluster filesystem... Oct 12 14:54:07 pve pveproxy[3646]: worker exit Oct 12 14:54:07 pve pveproxy[890]: worker 3646 finished Oct 12 14:54:07 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:07 pve pveproxy[890]: worker 3650 started Oct 12 14:54:07 pve pveproxy[3647]: worker exit Oct 12 14:54:07 pve pveproxy[3650]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:07 pve pveproxy[3648]: worker exit Oct 12 14:54:07 pve pveproxy[890]: worker 3647 finished Oct 12 14:54:07 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:07 pve pveproxy[890]: worker 3651 started Oct 12 14:54:07 pve pveproxy[890]: worker 3648 finished Oct 12 14:54:07 pve pveproxy[890]: starting 1 worker(s) Oct 12 14:54:07 pve pveproxy[890]: worker 3652 started Oct 12 14:54:07 pve pveproxy[3651]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:07 pve pveproxy[3652]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 14:54:08 pve pmxcfs[3649]: [main] crit: Unable to get local IP address Oct 12 14:54:08 pve pmxcfs[3649]: [main] crit: Unable to get local IP address Oct 12 14:54:08 pve systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION Oct 12 14:54:08 pve systemd[1]: pve-cluster.service: Failed with result 'exit-code'. Oct 12 14:54:08 pve systemd[1]: Failed to start The Proxmox VE cluster filesystem. Oct 12 14:54:08 pve systemd[1]: Condition check resulted in Corosync Cluster Engine being skipped. Oct 12 14:54:08 pve systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 679. Oct 12 14:54:08 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. Oct 12 14:54:08 pve systemd[1]: Starting The Proxmox VE cluster filesystem... Oct 12 14:54:12 pve pveproxy[3650]: worker exit Oct 12 14:54:12 pvesystemctl status pve-manager.service● pve-guests.service - PVE guests Loaded: loaded (/lib/systemd/system/pve-guests.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2025-10-12 14:04:14 CEST; 53min ago Process: 899 ExecStartPre=/usr/share/pve-manager/helpers/pve-startall-delay (code=exited, status=0/SUCCESS) Process: 900 ExecStart=/usr/bin/pvesh --nooutput create /nodes/localhost/startall (code=exited, status=111) Main PID: 900 (code=exited, status=111) CPU: 747ms Oct 12 14:04:13 pve systemd[1]: Starting PVE guests... Oct 12 14:04:14 pve pvesh[900]: ipcc_send_rec[1] failed: Connection refused Oct 12 14:04:14 pve pvesh[900]: ipcc_send_rec[2] failed: Connection refused Oct 12 14:04:14 pve pvesh[900]: ipcc_send_rec[3] failed: Connection refused Oct 12 14:04:14 pve pvesh[900]: Unable to load access control list: Connection refused Oct 12 14:04:14 pve systemd[1]: pve-guests.service: Main process exited, code=exited, status=111/n/a Oct 12 14:04:14 pve systemd[1]: pve-guests.service: Failed with result 'exit-code'. Oct 12 14:04:14 pve systemd[1]: Failed to start PVE guests. -
@crunchip sagte in Proxmox WebIf nicht erreichbar:
apt-get install --reinstall pve-manager
Reading package lists... Done Building dependency tree... Done Reading state information... Done Reinstallation of pve-manager is not possible, it cannot be downloaded. 0 upgraded, 0 newly installed, 0 to remove and 161 not upgraded. -
@negalein sagte in Proxmox WebIf nicht erreichbar:
pve-ssl.key: failed
dann mach mal
pvecm updatecerts -f systemctl restart pveproxyPrüfe, ob die IP angezeigt wird mit
hostname -I -
@negalein sagte in Proxmox WebIf nicht erreichbar:
and 161 not upgraded.
Pfleg die Kiste. Da hängt einiges in der Pipeline.
-
@crunchip sagte in Proxmox WebIf nicht erreichbar:
pvecm updatecerts -f
ipcc_send_rec[1] failed: Connection refused ipcc_send_rec[2] failed: Connection refused ipcc_send_rec[3] failed: Connection refused Unable to load access control list: Connection refusedhostname -I
10.0.1.206@thomas-braun sagte in Proxmox WebIf nicht erreichbar:
Pfleg die Kiste. Da hängt einiges in der Pipeline.
I know!
die lag monatelang in der Schublade.
Wird sofort erledigt, sobald wieder alles läuft. -
@negalein sagte in Proxmox WebIf nicht erreichbar:
Wird sofort erledigt, sobald wieder alles läuft.
Ich würde das ja andersherum angehen.
ZUERST die Basis klar kriegen und erst DANACH die darauf aufbauenden Dinge konfigurieren. -
@negalein sagte in Proxmox WebIf nicht erreichbar:
ipcc_send_rec[1] failed: Connection refused ipcc_send_rec[2] failed: Connection refused ipcc_send_rec[3] failed: Connection refused Unable to load access control list: Connection refused
systemctl status pve-cluster systemctl restart pve-cluster journalctl -u pve-cluster -b --no-pager | tail -40 -
@thomas-braun sagte in Proxmox WebIf nicht erreichbar:
Ich würde das ja andersherum angehen.
gerade dabei
-
@thomas-braun wird aber schwierig ohne funktionierendes Netzwerk
-
@crunchip sagte in Proxmox WebIf nicht erreichbar:
ohne funktionierendes Netzwerk
Grundsätzlich scheint doch da was zu sein.
Sonst hätte apt-get ja nicht ausrechnen können, das 161 Pakete zum Update anstehen. -
@thomas-braun ja, aber gewisse Dinge können dann aber nicht umgesetzt werden bzw bestimmte Befehle nicht auf Proxmoxebene ausgeführt werden, solange der Proxmox Cluster-Dienst bzw. Corosync nicht laufen, deshalb greifen auch die obigen Befehle nicht
-
@crunchip sagte in Proxmox WebIf nicht erreichbar:
systemctl status pve-cluster
● pve-cluster.service - The Proxmox VE cluster filesystem Loaded: loaded (/lib/systemd/system/pve-cluster.service; enabled; vendor preset: enabled) Active: activating (start) since Sun 2025-10-12 15:27:11 CEST; 1ms ago Cntrl PID: 930 (pmxcfs) Tasks: 1 (limit: 18839) Memory: 128.0K CPU: 199us CGroup: /system.slice/pve-cluster.service └─930 /usr/bin/pmxcfs Oct 12 15:27:11 pve systemd[1]: Starting The Proxmox VE cluster filesystem...systemctl restart pve-cluster
Job for pve-cluster.service failed because the control process exited with error code. See "systemctl status pve-cluster.service" and "journalctl -xe" for details.journalctl -xe░░ The job identifier is 8927 and the job result is done. Oct 12 15:30:03 pve systemd[1]: Starting The Proxmox VE cluster filesystem... ░░ Subject: A start job for unit pve-cluster.service has begun execution ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A start job for unit pve-cluster.service has begun execution. ░░ ░░ The job identifier is 8927. Oct 12 15:30:07 pve pmxcfs[1084]: [main] crit: Unable to get local IP address Oct 12 15:30:07 pve pmxcfs[1084]: [main] crit: Unable to get local IP address Oct 12 15:30:07 pve systemd[1]: pve-cluster.service: Control process exited, code=exited, status=255/EXCEPTION ░░ Subject: Unit process exited ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ An ExecStart= process belonging to unit pve-cluster.service has exited. ░░ ░░ The process' exit code is 'exited' and its exit status is 255. Oct 12 15:30:07 pve systemd[1]: pve-cluster.service: Failed with result 'exit-code'. ░░ Subject: Unit failed ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ The unit pve-cluster.service has entered the 'failed' state with result 'exit-code'. Oct 12 15:30:07 pve systemd[1]: Failed to start The Proxmox VE cluster filesystem. ░░ Subject: A start job for unit pve-cluster.service has failed ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A start job for unit pve-cluster.service has finished with a failure. ░░ ░░ The job identifier is 8927 and the job result is failed. Oct 12 15:30:07 pve systemd[1]: Condition check resulted in Corosync Cluster Engine being skipped. ░░ Subject: A start job for unit corosync.service has finished successfully ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A start job for unit corosync.service has finished successfully. ░░ ░░ The job identifier is 8930. Oct 12 15:30:07 pve pveproxy[1081]: worker exit Oct 12 15:30:07 pve pveproxy[1082]: worker exit Oct 12 15:30:07 pve pveproxy[889]: worker 1081 finished Oct 12 15:30:07 pve pveproxy[889]: starting 1 worker(s) Oct 12 15:30:07 pve pveproxy[889]: worker 1082 finished Oct 12 15:30:07 pve pveproxy[889]: worker 1085 started Oct 12 15:30:07 pve pveproxy[1083]: worker exit Oct 12 15:30:07 pve pveproxy[1085]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 15:30:07 pve pveproxy[889]: worker 1083 finished Oct 12 15:30:07 pve pveproxy[889]: starting 2 worker(s) Oct 12 15:30:07 pve pveproxy[889]: worker 1086 started Oct 12 15:30:07 pve pveproxy[889]: worker 1087 started Oct 12 15:30:07 pve pveproxy[1086]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 15:30:07 pve pveproxy[1087]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1917. Oct 12 15:30:08 pve systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 22. ░░ Subject: Automatic restarting of a unit has been scheduled ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ Automatic restarting of the unit pve-cluster.service has been scheduled, as the result for ░░ the configured Restart= setting for the unit. Oct 12 15:30:08 pve systemd[1]: Stopped The Proxmox VE cluster filesystem. ░░ Subject: A stop job for unit pve-cluster.service has finished ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A stop job for unit pve-cluster.service has finished. ░░ ░░ The job identifier is 9103 and the job result is done. Oct 12 15:30:08 pve systemd[1]: Starting The Proxmox VE cluster filesystem... ░░ Subject: A start job for unit pve-cluster.service has begun execution ░░ Defined-By: systemd ░░ Support: https://www.debian.org/support ░░ ░░ A start job for unit pve-cluster.service has begun execution. ░░ ░░ The job identifier is 9103. -
Wenn man die Netzwerkmaske ändert, sollte es bei allen Geräten im zugehörigen Netzwerk identisch eingestellt werden. Danach den Netzwerkstack neu starten (z.B. mit einem Reboot).
Sind ALLE Beteiligten Geräte umgestellt?Tschau
Uwe -
@negalein zeig mal den Eintrag in
/etc/pve/corosync.conf
