Error i2c adapter after upgrade of node.js version 22

[Thomas Braun]

@hschief

node-gyp rebuild war doch von Dir.

Das wüsste ich aber...

iob upgrade iobroker.i2c@AKTUELLE_VERSION

war von mir

[hschief]

@thomas-braun Schau dir mal den 2ten Eintrag in dem Thread an. Da hattest du folgendes

iobroker add i2c auto --host chet --debug

NPM version: 11.6.0Installing iobroker.i2c@1.2.1... (System call)

> node-gyp rebuild

Aber ist eigentlich auch egal, ich habe den Adapter vor dem node-gyp rebuild mit deinem Befehl installiert:

iob upgrade iobroker.i2c@1.2.1

Hat aber nicht funktioniert. Ich finde es eher interessanter, dass dies bei Dir funktioniert. Ich mache auf jeden Fall mal ein Issue im GitHub für den Adapter auf, ich glaube zwar nicht, dass da was passiert, der ist ja schon länger nicht mehr gepflegt worden. Ich suche weiter.

[Thomas Braun]

@hschief

Jaaaaaaaaaa, das ist aber die Konsolenausgabe von der Eingabe auf meinem System.
Das ist kein Kommando, das du verwendest.

[Thomas Braun]

@hschief sagte in Error i2c adapter after upgrade of node.js version 22:

Hat aber nicht funktioniert.

Meldungen?

[hschief]

@thomas-braun Ich führe den nochmals aus und kann das gerne hier posten, was aber der normal install output, mittlerweile gibt es dazu aber im Github auch ein offenen Issue von 2 weiteren Usern die den gleichen Fehler haben.
Ich bleib dran, Danke für deine Rückmeldung.

[Thomas Braun]

@hschief

Du meinst den:

https://github.com/UncleSamSwiss/ioBroker.i2c/issues/840

Der eine hantiert da (warum auch immer, wird nirgendwo empfohlen...) mit n herum. Wer weiß was dabei herumkommt.
Der iobroker verwendet auf Debian-basierten Systemen immer die von nodesource gepackte Version.

MarkSau created this issue in UncleSamSwiss/ioBroker.i2c

open Nach Node Update auf 22 startet I2C nicht mehr. Neuinstallation des Adapters schlägt fehl #840

[Homoran]

@thomas-braun sagte in Error i2c adapter after upgrade of node.js version 22:

Du meinst den:

ist der überhaupt noch aktiv?
last changes >4 Jahre

@mcm1957 ?

[Thomas Braun]

Hier wird der Adapter inkl. aller Deps sauber gebaut:

$ iobroker add i2c auto --host chet --debug

NPM version: 11.6.0

Installing iobroker.i2c@1.2.1... (System call)

> i2c-bus@5.2.3 install> node-gyp rebuild

gyp info it worked if it ends with okgyp info using node-gyp@11.2.0

gyp info using node@24.9.0 | linux | arm64

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3

gyp info spawn args [gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/i2c-bus/build/config.gypi',gyp info spawn args '-I',

gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/24.9.0/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/24.9.0',gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/24.9.0/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/i2c-bus',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]

gyp info spawn makegyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]

make: Entering directory '/opt/iobroker/node_modules/i2c-bus/build'

CXX(target) Release/obj.target/i2c/src/i2c.o

SOLINK_MODULE(target) Release/obj.target/i2c.node

COPY Release/i2c.node

make: Leaving directory '/opt/iobroker/node_modules/i2c-bus/build'

gyp info ok

added 14 packages in 25s

245 packages are looking for funding run `npm fund` for details

host.chet install adapter i2c

upload [4] i2c.admin /opt/iobroker/node_modules/iobroker.i2c/admin/build/index.css build/index.css text/css

upload [3] i2c.admin /opt/iobroker/node_modules/iobroker.i2c/admin/build/index.js build/index.js application/javascript

upload [2] i2c.admin /opt/iobroker/node_modules/iobroker.i2c/admin/i2c.png i2c.png image/png

upload [1] i2c.admin /opt/iobroker/node_modules/iobroker.i2c/admin/index_m.html index_m.html text/html

upload [0] i2c.admin /opt/iobroker/node_modules/iobroker.i2c/admin/style.css style.css text/css

host.chet object system.adapter.i2c created/updated

Updating objects from io-package.json for adapter "i2c" with version "1.2.1"

host.chet create instance i2c

host.chet object system.adapter.i2c.0.alive created

host.chet object system.adapter.i2c.0.connected created

host.chet object system.adapter.i2c.0.compactMode created

host.chet object system.adapter.i2c.0.cpu created

host.chet object system.adapter.i2c.0.cputime created

host.chet object system.adapter.i2c.0.memHeapUsed created

host.chet object system.adapter.i2c.0.memHeapTotal created

host.chet object system.adapter.i2c.0.memRss created

host.chet object system.adapter.i2c.0.uptime created

host.chet object system.adapter.i2c.0.inputCount created

host.chet object system.adapter.i2c.0.outputCount created

host.chet object system.adapter.i2c.0.eventLoopLag created

host.chet object system.adapter.i2c.0.sigKill created

host.chet object system.adapter.i2c.0.logLevel created

host.chet object system.adapter.i2c.0 created

Process exited with code 0

[mcm1957]

@homoran said in Error i2c adapter after upgrade of node.js version 22:

@thomas-braun sagte in Error i2c adapter after upgrade of node.js version 22:

Du meinst den:

ist der überhaupt noch aktiv?
last changes >4 Jahre

@mcm1957 ?

EDIT:
Kommentar grundlegend geändert da eine Stellungname des Devs bereits existiert:

Siehe Info von @UncleSam hier:
https://github.com/UncleSamSwiss/ioBroker.i2c/issues/841#issuecomment-3288275774

MarkSau created this issue in UncleSamSwiss/ioBroker.i2c

closed Is this adapter dead? #841

[Thomas Braun]

Ich hab jetzt extra auch nochmal einen rebuild bedingt durch einen Wechsel von nodejs ausgelöst:

2025-10-06 12:10:24.232  - error: host.chet Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/i2c-bus/build/Release/i2c.node'
2025-10-06 12:10:24.233  - error: host.chet Caught by controller[0]: was compiled against a different Node.js version using
2025-10-06 12:10:24.234  - error: host.chet Caught by controller[0]: NODE_MODULE_VERSION 137. This version of Node.js requires
2025-10-06 12:10:24.235  - error: host.chet Caught by controller[0]: NODE_MODULE_VERSION 127. Please try re-compiling or re-installing
2025-10-06 12:10:24.235  - error: host.chet Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`).
2025-10-06 12:10:24.236  - error: host.chet Caught by controller[0]:     at Object..node (node:internal/modules/cjs/loader:1865:18)
2025-10-06 12:10:24.238  - error: host.chet Caught by controller[0]:     at Module.load (node:internal/modules/cjs/loader:1441:32)
2025-10-06 12:10:24.239  - error: host.chet Caught by controller[0]:     at Function._load (node:internal/modules/cjs/loader:1263:12)
2025-10-06 12:10:24.239  - error: host.chet Caught by controller[0]:     at TracingChannel.traceSync (node:diagnostics_channel:322:14)
2025-10-06 12:10:24.240  - error: host.chet Caught by controller[0]:     at wrapModuleLoad (node:internal/modules/cjs/loader:237:24)
2025-10-06 12:10:24.240  - error: host.chet Caught by controller[0]:     at Module.require (node:internal/modules/cjs/loader:1463:12)
2025-10-06 12:10:24.241  - error: host.chet Caught by controller[0]:     at require (node:internal/modules/helpers:147:16)
2025-10-06 12:10:24.241  - error: host.chet Caught by controller[0]:     at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48)
2025-10-06 12:10:24.242  - error: host.chet Caught by controller[0]:     at Object.<anonymous> (/opt/iobroker/node_modules/i2c-bus/i2c-bus.js:4:32)
2025-10-06 12:10:24.242  - error: host.chet Caught by controller[0]:     at Module._compile (node:internal/modules/cjs/loader:1706:14) {
2025-10-06 12:10:24.243  - error: host.chet Caught by controller[0]:   code: 'ERR_DLOPEN_FAILED'
2025-10-06 12:10:24.244  - error: host.chet Caught by controller[0]: }
2025-10-06 12:10:24.244  - error: host.chet Caught by controller[0]: Node.js v22.20.0
2025-10-06 12:10:24.244  - error: host.chet instance system.adapter.i2c.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2025-10-06 12:10:24.246  - warn: host.chet adapter "i2c" seems to be installed for a different version of Node.js. Trying to rebuild it... 1 attempt
2025-10-06 12:10:26.700  - info: ws.0 (286400) starting. Version 3.0.19 in /opt/iobroker/node_modules/iobroker.ws, node: v22.20.0, js-controller: 7.0.7
2025-10-06 12:10:26.790  - info: ws.0 (286400) socket.io server listening on port 8084
2025-10-06 12:10:38.213  - info: weather-warnings.0 (286381) Refresh Interval: 15 minutes
2025-10-06 12:10:38.285  - info: weather-warnings.0 (286381) [whatsapp] Create notification service whatsapp adapter: whatsapp-cmb.0.
2025-10-06 12:10:38.361  - info: weather-warnings.0 (286381) [alexa2] Create notification service alexa2 state: alexa2.0.Echo-Devices.f11bc24f45914615a92ba00dcb
                       4ba9d5.Commands.speak.
2025-10-06 12:10:38.367  - info: weather-warnings.0 (286381) UWZ activated. Retrieve data.
2025-10-06 12:10:40.351  - info: tankerkoenig.0 (286299) Start first request
2025-10-06 12:11:12.820  - warn: host.chet instance system.adapter.parcel.0 terminated due to SIGSEGV
2025-10-06 12:11:53.176  - error: parcel.0 (287134) Error: getaddrinfo ENOTFOUND www.dpd.com
2025-10-06 12:12:00.463  - info: i2c.0 (287178) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.i2c, node: v22.20.0, js-controller: 7.0.7
2025-10-06 12:12:00.575  - info: i2c.0 (287178) Using bus number: 1

Läuft