Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

  1. ioBroker Community Home
  2. Deutsch
  3. Tester
  4. Test Adapter Unifi Network

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.3k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.0k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    15
    1
    2.4k

Test Adapter Unifi Network

Geplant Angeheftet Gesperrt Verschoben Tester
68 Beiträge 16 Kommentatoren 2.7k Aufrufe 23 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • E Online
    E Online
    emil70
    schrieb am zuletzt editiert von emil70
    #15

    Teste das gerade auch. Danke für den Adapter

    Blöde Frage:

    [updateClients]: Discovered 152 disconnected clients (clients: 101, guests: 0, vpn: 0, blacklisted: 0)
    

    Wo finde ich die in der UniFi-OS 4.4.2 Netzwerk 9.4.19
    damit ich die mal löschen kann

    gruss emil70

    iobroker(V9) und Pi-hole läuft über docker (js-controller 6.0.11 und admin v7.1.15) auf einem synology DS918+ mit DSM 7.1.1-42962 Update 6

    1 Antwort Letzte Antwort
    0
    • crunchipC Abwesend
      crunchipC Abwesend
      crunchip
      Forum Testing Most Active
      schrieb am zuletzt editiert von
      #16

      @scrounger sagte in Test Adapter Unifi Network:

      dass ich nur das intergriere was ich wirklich brauche

      ist das auch mit geplant?

      [onNetworkEvent]: not implemented event (key: EVT_IPS_IpsAlert,) - Please report this to the developer and creating an issue on github!
      

      umgestiegen von Proxmox auf Unraid

      ScroungerS 1 Antwort Letzte Antwort
      0
      • crunchipC crunchip

        @scrounger sagte in Test Adapter Unifi Network:

        dass ich nur das intergriere was ich wirklich brauche

        ist das auch mit geplant?

        [onNetworkEvent]: not implemented event (key: EVT_IPS_IpsAlert,) - Please report this to the developer and creating an issue on github!
        
        ScroungerS Offline
        ScroungerS Offline
        Scrounger
        Developer
        schrieb am zuletzt editiert von
        #17

        @crunchip sagte in Test Adapter Unifi Network:

        @scrounger sagte in Test Adapter Unifi Network:

        dass ich nur das intergriere was ich wirklich brauche

        ist das auch mit geplant?

        [onNetworkEvent]: not implemented event (key: EVT_IPS_IpsAlert,) - Please report this to the developer and creating an issue on github!
        

        Da jede HW andere events haben kann, kenn ich natürlich nicht alle.
        Wie im log beschrieben, ein issue aufmachen mit allen daten aus der meldung, ggf. vertrauliches infos abändern!

        Dann schau ich mir an, ob es sinn macht dieses event zu implementieren oder ob es auf die ignore list kommt.

        <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

        <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

        crunchipC 1 Antwort Letzte Antwort
        0
        • ScroungerS Scrounger

          @crunchip sagte in Test Adapter Unifi Network:

          @scrounger sagte in Test Adapter Unifi Network:

          dass ich nur das intergriere was ich wirklich brauche

          ist das auch mit geplant?

          [onNetworkEvent]: not implemented event (key: EVT_IPS_IpsAlert,) - Please report this to the developer and creating an issue on github!
          

          Da jede HW andere events haben kann, kenn ich natürlich nicht alle.
          Wie im log beschrieben, ein issue aufmachen mit allen daten aus der meldung, ggf. vertrauliches infos abändern!

          Dann schau ich mir an, ob es sinn macht dieses event zu implementieren oder ob es auf die ignore list kommt.

          crunchipC Abwesend
          crunchipC Abwesend
          crunchip
          Forum Testing Most Active
          schrieb am zuletzt editiert von
          #18

          @scrounger ich brauch dies nicht,wollt eher damit den Hinweis geben, daß dies auftaucht. Kann aber wenn gewünscht, trotzdem eins erstellen

          umgestiegen von Proxmox auf Unraid

          1 Antwort Letzte Antwort
          0
          • ScroungerS Offline
            ScroungerS Offline
            Scrounger
            Developer
            schrieb am zuletzt editiert von
            #19

            @crunchip

            @crunchip
            Ja wäre super weil sonst komnt halt immer Mal wieder diese warn Meldung im Log.

            <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

            <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

            Rene55R 1 Antwort Letzte Antwort
            0
            • ScroungerS Scrounger

              @codierknecht
              teste mal die v1.1.3

              CodierknechtC Online
              CodierknechtC Online
              Codierknecht
              Developer Most Active
              schrieb am zuletzt editiert von Codierknecht
              #20

              @scrounger sagte in Test Adapter Unifi Network:

              teste mal die v1.1.3

              Die gute Nachricht: Die Instanz wird grün.
              Die schlechte: Ich erhalte keine Daten :-(

              a101c445-bd8a-4768-bdce-5ad7e6290a75-grafik.png

              FYI: Es läuft hier nur ein Unifi-AP-Pro. Also ausschließlich WLAN-Clients und kein Unifi-OS.

              unifi-network.0
              	2025-10-05 17:55:09.066	info	[onReady]: WebSocket listener to realtime API successfully started
              unifi-network.0
              	2025-10-05 17:55:09.058	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
              unifi-network.0
              	2025-10-05 17:55:09.047	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
              unifi-network.0
              	2025-10-05 17:55:09.020	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
              unifi-network.0
              	2025-10-05 17:55:08.920	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:55:05.886	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:55:02.841	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:59.806	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:56.772	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:53.740	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:50.688	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:47.654	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
              unifi-network.0
              	2025-10-05 17:54:44.610	info	[login]: WebSocket connection to realtime API successfully established
              unifi-network.0
              	2025-10-05 17:54:44.587	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
              unifi-network.0
              	2025-10-05 17:54:44.263	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
              unifi-network.0
              	2025-10-05 17:54:44.262	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
              unifi-network.0
              	2025-10-05 17:54:43.974	debug	[NetworkApi.logout] Logging out and clearing credentials.
              unifi-network.0
              	2025-10-05 17:54:43.957	info	starting. Version 1.1.3 (non-npm: Scrounger/ioBroker.unifi-network#fab63502974c2b23b621ebc96844f9d5bc0c61ef) in /opt/iobroker/node_modules/iobroker.unifi-network, node: v22.20.0, js-controller: 7.0.7
              unifi-network.0
              	2025-10-05 17:54:43.896	debug	States connected to redis: 0.0.0.0:9010
              unifi-network.0
              	2025-10-05 17:54:43.846	debug	States create User PubSub Client
              unifi-network.0
              	2025-10-05 17:54:43.846	debug	States create System PubSub Client
              unifi-network.0
              	2025-10-05 17:54:43.841	debug	Redis States: Use Redis connection: 0.0.0.0:9010
              unifi-network.0
              	2025-10-05 17:54:43.829	debug	Objects connected to redis: 0.0.0.0:9011
              unifi-network.0
              	2025-10-05 17:54:43.827	debug	Objects client initialize lua scripts
              unifi-network.0
              	2025-10-05 17:54:43.812	debug	Objects create User PubSub Client
              unifi-network.0
              	2025-10-05 17:54:43.812	debug	Objects create System PubSub Client
              unifi-network.0
              	2025-10-05 17:54:43.811	debug	Objects client ready ... initialize now
              unifi-network.0
              	2025-10-05 17:54:43.798	debug	Redis Objects: Use Redis connection: 0.0.0.0:9011
              host.iobroker
              	2025-10-05 17:54:43.193	info	instance system.adapter.unifi-network.0 in version "1.1.3" (non-npm: Scrounger/ioBroker.unifi-network#fab63502974c2b23b621ebc96844f9d5bc0c61ef) started with pid 3818642
              host.iobroker
              	2025-10-05 17:54:42.900	info	"system.adapter.unifi-network.0" enabled
              

              Meine Einstellungen:
              d2919fed-3de1-4342-af69-66ffe6da92d8-grafik.png
              Vielleicht korrigierts Du bei Gelegenheit auch den Fauxpas der automatischen Übersetzung :grin:

              "Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")

              Proxmox 9.1.1 LXC|8 GB|Core i7-6700
              HmIP|ZigBee|Tasmota|Unifi
              Zabbix Certified Specialist
              Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag

              ScroungerS 1 Antwort Letzte Antwort
              0
              • ScroungerS Scrounger

                @crunchip

                @crunchip
                Ja wäre super weil sonst komnt halt immer Mal wieder diese warn Meldung im Log.

                Rene55R Offline
                Rene55R Offline
                Rene55
                schrieb am zuletzt editiert von Negalein
                #21

                @scrounger Ist das auch wichtig, weil "Please report this to the developer "?

                warn	[onNetworkEvent]: not implemented event (key: EVT_IPS_IpsAlert,) - 
                Please report this to the developer and creating an issue on github! 
                (
                meta: {
                   "rc":"ok",
                   "message":"events"
                   }, 
                data: {
                   "dest_ip":"192.168.172.110",
                   "dest_port":80,
                   "dst_mac":"bc:24:11:4f:45:38",
                   "event_type":"alert",
                   "flow":{
                   	"bytes_toclient":0,
                   	"bytes_toserver":66,
                   	"pkts_toclient":0,
                   	"pkts_toserver":1,
                   	"start":"2025-10-03T22:07:34.728843 0200"
                   	},
                   "flow_id":211562254442251,
                   "host":"usg-sensor",
                   "in_iface":"eth4",
                   "metadata":{
                   	"flowbits":["ET.Evil","ET.DshieldIP"]
                   	},
                   "out_iface":"lo",
                   "proto":"TCP",
                   "src_ip":"204.76.203.212",
                   "src_mac":"9e:05:d6:b5:df:28",
                   "src_port":35936,
                   "timestamp":1759522054,
                   "ubnt":{
                   	"affected_products":"",
                   	"classtype":"",
                   	"counterpart_hostnames":[],
                   	"cve_reference":"",
                   	"description":"",
                   	"event_version":"3.1",
                   	"reference_url":[],
                   	"signature_type":"ET",
                   	"ubnt_category":"DSHIELD"
                   },
                   "usgip":"91.7.160.82",
                   "unique_alertid":"7-2025-10-03T22:07:34.728843 0200",
                   "srcipGeo":{
                   	"address":"204.76.203.212",
                   	"asn":51396,
                   	"organization":"Pfcloud UG",
                   	"isp":"Pfcloud UG",
                   	"country_code":"NL",
                   	"country_name":"The Netherlands",
                   	"continent_code":"EU",
                   	"city":"Eygelshoven",
                   	"latitude":50.8897,
                   	"longitude":6.0563,
                   	"accuracy":20,
                   	"timezone":"Europe/Amsterdam"
                   },
                   "dstipGeo":{
                   	"address":"192.168.172.110",
                   	"asn":0,
                   	"organization":"",
                   	"isp":"",
                   	"country_code":"",
                   	"country_name":"",
                   	"continent_code":"",
                   	"city":"",
                   	"latitude":0,
                   	"longitude":0,
                   	"accuracy":0,
                   	"timezone":""
                   },
                   "usgipGeo":{
                   	"address":"91.7.160.82",
                   	"asn":3320,
                   	"organization":"Deutsche Telekom AG",
                   	"isp":"VipNet Telecom",
                   	"country_code":"DE",
                   	"country_name":"Germany",
                   	"continent_code":"EU",
                   	"city":"Köln",
                   	"latitude":50.9427,
                   	"longitude":6.9584,
                   	"accuracy":5,
                   	"timezone":"Europe/Berlin"
                   },
                   "srcipCountry":"NL",
                   "srcipASN":"51396 Pfcloud UG",
                   "usgipCountry":"DE",
                   "usgipASN":"3320 Deutsche Telekom AG",
                   "catname":"DSHIELD",
                   "inner_alert_action":"allowed",
                   "inner_alert_category":"Misc Attack",
                   "inner_alert_gid":1,
                   "inner_alert_metadata":{
                   	"affected_product":["Any"],
                   	"attack_target":["Any"],
                   	"created_at":["2010_12_30"],
                   	"deployment":["Perimeter"],
                   	"signature_severity":["Major"],
                   	"tag":["Dshield"],
                   	"ubnt_category":["DSHIELD"],
                   	"updated_at":["2025_10_02"]
                   },
                   "inner_alert_rev":7515,
                   "inner_alert_severity":2,
                   "inner_alert_signature":"ET DROP Dshield Block Listed Source group 1",
                   "inner_alert_signature_id":2402000,"key":"EVT_IPS_IpsAlert",
                   "subsystem":"www",
                   "is_negative":true,
                   "site_id":"667fd2400487b63810d07718",
                   "time":1759522054000,
                   "datetime":"2025-10-03T20:07:34Z",
                   "msg":"IPS Alert 2: Misc Attack. 	
                   		Signature ET DROP Dshield Block Listed Source group 1. 
                   		From: 204.76.203.212:35936, 
                   		to: 192.168.172.110:80, 
                   		protocol: TCP",
                   "_id":"68e02ddd9c5b50427590ff3d"
                   }
                )
                

                Host: Fujitsu Intel(R) Pentium(R) CPU G4560T, 32 GB RAM, Proxmox 8.x + lxc Ubuntu 22.04
                ioBroker (8 GB RAM) Node.js: 20.19.1, NPM: 10.8.2, js-Controller: 7.0.6, Admin: 7.6.3
                Wetterstation: Froggit WH3000SE V1.6.6

                1 Antwort Letzte Antwort
                0
                • crunchipC Abwesend
                  crunchipC Abwesend
                  crunchip
                  Forum Testing Most Active
                  schrieb am zuletzt editiert von
                  #22

                  @rene55 mach deine privaten Daten raus

                  umgestiegen von Proxmox auf Unraid

                  lobomauL Rene55R 2 Antworten Letzte Antwort
                  0
                  • crunchipC crunchip

                    @rene55 mach deine privaten Daten raus

                    lobomauL Offline
                    lobomauL Offline
                    lobomau
                    schrieb am zuletzt editiert von lobomau
                    #23

                    @Scrounger noch habe ich den Adapter nicht am Laufen. Bisher hatte ich den Unifi-Adapter am Laufen.
                    Ich habe einen "Cloud Gateway Ultra". Ich bin davon ausgegangen, dass dies ein Unifi OS ist. Es läuft Version Network 9.4.19, UniFi OS 4.3.9. Einloggen kann ich mich über 192.168.1.1. Ich gebe da keinen Port zusätzlich an. Der andere Adapter hingegen läuft auf port 8443. Muss ich den hier auch einstellen? Das geht ja nur ohne "ist Unifi OS". Und habe ich "default" controller site? Wie finde ich es heraus?

                    Edit: nee, der andere Adapter hat auch keinen Port vorgewählt... es erscheint geschwächt 8443 (hatte ich früher mal als container laufen)
                    Edit2: ist wohl default:
                    c2d8a039-6695-427e-922e-d82a0f8500b4-image.png

                    
                    unifi-network.0
                    2025-10-05 21:11:15.517	info	[onReady]: WebSocket listener to realtime API successfully started
                    
                    unifi-network.0
                    2025-10-05 21:11:15.503	error	[login]: Login to the Unifi-Network controller API failed! (host: 192.168.1.1, site: default)
                    
                    unifi-network.0
                    2025-10-05 21:11:15.502	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                    
                    unifi-network.0
                    2025-10-05 21:11:12.184	info	starting. Version 1.1.3 (non-npm: Scrounger/ioBroker.unifi-network#fab63502974c2b23b621ebc96844f9d5bc0c61ef) in /opt/iobroker/node_modules/iobroker.unifi-network, node: v22.20.0, js-controller: 7.0.7
                    

                    Host: NUC8i3 mit Proxmox:

                    • ioBroker CT Debian 13, npm 10.9.3, nodejs 22.20.0
                    • Slave: Pi4
                    1 Antwort Letzte Antwort
                    0
                    • crunchipC crunchip

                      @rene55 mach deine privaten Daten raus

                      Rene55R Offline
                      Rene55R Offline
                      Rene55
                      schrieb am zuletzt editiert von
                      #24

                      @crunchip Thanks, aber die Daten sind schon verfälscht. :nerd_face:

                      Host: Fujitsu Intel(R) Pentium(R) CPU G4560T, 32 GB RAM, Proxmox 8.x + lxc Ubuntu 22.04
                      ioBroker (8 GB RAM) Node.js: 20.19.1, NPM: 10.8.2, js-Controller: 7.0.6, Admin: 7.6.3
                      Wetterstation: Froggit WH3000SE V1.6.6

                      1 Antwort Letzte Antwort
                      0
                      • CodierknechtC Codierknecht

                        @scrounger sagte in Test Adapter Unifi Network:

                        teste mal die v1.1.3

                        Die gute Nachricht: Die Instanz wird grün.
                        Die schlechte: Ich erhalte keine Daten :-(

                        a101c445-bd8a-4768-bdce-5ad7e6290a75-grafik.png

                        FYI: Es läuft hier nur ein Unifi-AP-Pro. Also ausschließlich WLAN-Clients und kein Unifi-OS.

                        unifi-network.0
                        	2025-10-05 17:55:09.066	info	[onReady]: WebSocket listener to realtime API successfully started
                        unifi-network.0
                        	2025-10-05 17:55:09.058	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                        unifi-network.0
                        	2025-10-05 17:55:09.047	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                        unifi-network.0
                        	2025-10-05 17:55:09.020	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                        unifi-network.0
                        	2025-10-05 17:55:08.920	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:55:05.886	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:55:02.841	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:59.806	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:56.772	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:53.740	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:50.688	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:47.654	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots.
                        unifi-network.0
                        	2025-10-05 17:54:44.610	info	[login]: WebSocket connection to realtime API successfully established
                        unifi-network.0
                        	2025-10-05 17:54:44.587	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                        unifi-network.0
                        	2025-10-05 17:54:44.263	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
                        unifi-network.0
                        	2025-10-05 17:54:44.262	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                        unifi-network.0
                        	2025-10-05 17:54:43.974	debug	[NetworkApi.logout] Logging out and clearing credentials.
                        unifi-network.0
                        	2025-10-05 17:54:43.957	info	starting. Version 1.1.3 (non-npm: Scrounger/ioBroker.unifi-network#fab63502974c2b23b621ebc96844f9d5bc0c61ef) in /opt/iobroker/node_modules/iobroker.unifi-network, node: v22.20.0, js-controller: 7.0.7
                        unifi-network.0
                        	2025-10-05 17:54:43.896	debug	States connected to redis: 0.0.0.0:9010
                        unifi-network.0
                        	2025-10-05 17:54:43.846	debug	States create User PubSub Client
                        unifi-network.0
                        	2025-10-05 17:54:43.846	debug	States create System PubSub Client
                        unifi-network.0
                        	2025-10-05 17:54:43.841	debug	Redis States: Use Redis connection: 0.0.0.0:9010
                        unifi-network.0
                        	2025-10-05 17:54:43.829	debug	Objects connected to redis: 0.0.0.0:9011
                        unifi-network.0
                        	2025-10-05 17:54:43.827	debug	Objects client initialize lua scripts
                        unifi-network.0
                        	2025-10-05 17:54:43.812	debug	Objects create User PubSub Client
                        unifi-network.0
                        	2025-10-05 17:54:43.812	debug	Objects create System PubSub Client
                        unifi-network.0
                        	2025-10-05 17:54:43.811	debug	Objects client ready ... initialize now
                        unifi-network.0
                        	2025-10-05 17:54:43.798	debug	Redis Objects: Use Redis connection: 0.0.0.0:9011
                        host.iobroker
                        	2025-10-05 17:54:43.193	info	instance system.adapter.unifi-network.0 in version "1.1.3" (non-npm: Scrounger/ioBroker.unifi-network#fab63502974c2b23b621ebc96844f9d5bc0c61ef) started with pid 3818642
                        host.iobroker
                        	2025-10-05 17:54:42.900	info	"system.adapter.unifi-network.0" enabled
                        

                        Meine Einstellungen:
                        d2919fed-3de1-4342-af69-66ffe6da92d8-grafik.png
                        Vielleicht korrigierts Du bei Gelegenheit auch den Fauxpas der automatischen Übersetzung :grin:

                        ScroungerS Offline
                        ScroungerS Offline
                        Scrounger
                        Developer
                        schrieb am zuletzt editiert von
                        #25

                        @codierknecht
                        also ich hab jetzt extra mal einen self hosted controller in einem proxmox lxc aufgesetzt und auch ne AP dran gehängt.
                        Läuft bei mir ohne probleme. Evtl. wird da irgendwas geblockt?
                        Test mal die v1.1.4, hab ein paar debug info mit eingebaut, damit man sieht was er da genau macht. Am besten den Adapter davor komplett mal löschen.
                        Und bitte info's nach dem test im issue auf github posten!

                        @lobomau
                        Test mal die v1.1.4, UniFi OS oder self hosted wird jetzt automatusch erkannt. Am besten den Adapter davor komplett mal löschen.
                        Wenn noch immer Probleme bestehen, bitte issue auf github erstellen

                        <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

                        <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

                        lobomauL CodierknechtC 2 Antworten Letzte Antwort
                        0
                        • ScroungerS Scrounger

                          @codierknecht
                          also ich hab jetzt extra mal einen self hosted controller in einem proxmox lxc aufgesetzt und auch ne AP dran gehängt.
                          Läuft bei mir ohne probleme. Evtl. wird da irgendwas geblockt?
                          Test mal die v1.1.4, hab ein paar debug info mit eingebaut, damit man sieht was er da genau macht. Am besten den Adapter davor komplett mal löschen.
                          Und bitte info's nach dem test im issue auf github posten!

                          @lobomau
                          Test mal die v1.1.4, UniFi OS oder self hosted wird jetzt automatusch erkannt. Am besten den Adapter davor komplett mal löschen.
                          Wenn noch immer Probleme bestehen, bitte issue auf github erstellen

                          lobomauL Offline
                          lobomauL Offline
                          lobomau
                          schrieb am zuletzt editiert von lobomau
                          #26

                          Edit. ok... zuerst code eintragen und hinterher den Codeknopf drüber. Hab ich sonst andersrum gemacht...
                          @scrounger haben die bei Github etwas geändert? Sieht in der Preview nicht nach Code aus:

                          e7b9e55a-8c6a-429b-91e7-c826a450f060-{CB2BD426-7A55-4977-8D58-F1EF790D8E9A}.png

                          Host: NUC8i3 mit Proxmox:

                          • ioBroker CT Debian 13, npm 10.9.3, nodejs 22.20.0
                          • Slave: Pi4
                          ScroungerS 1 Antwort Letzte Antwort
                          0
                          • lobomauL lobomau

                            Edit. ok... zuerst code eintragen und hinterher den Codeknopf drüber. Hab ich sonst andersrum gemacht...
                            @scrounger haben die bei Github etwas geändert? Sieht in der Preview nicht nach Code aus:

                            e7b9e55a-8c6a-429b-91e7-c826a450f060-{CB2BD426-7A55-4977-8D58-F1EF790D8E9A}.png

                            ScroungerS Offline
                            ScroungerS Offline
                            Scrounger
                            Developer
                            schrieb am zuletzt editiert von
                            #27

                            @lobomau
                            https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/creating-and-highlighting-code-blocks#fenced-code-blocks

                            <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

                            <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

                            1 Antwort Letzte Antwort
                            0
                            • ScroungerS Scrounger

                              @codierknecht
                              also ich hab jetzt extra mal einen self hosted controller in einem proxmox lxc aufgesetzt und auch ne AP dran gehängt.
                              Läuft bei mir ohne probleme. Evtl. wird da irgendwas geblockt?
                              Test mal die v1.1.4, hab ein paar debug info mit eingebaut, damit man sieht was er da genau macht. Am besten den Adapter davor komplett mal löschen.
                              Und bitte info's nach dem test im issue auf github posten!

                              @lobomau
                              Test mal die v1.1.4, UniFi OS oder self hosted wird jetzt automatusch erkannt. Am besten den Adapter davor komplett mal löschen.
                              Wenn noch immer Probleme bestehen, bitte issue auf github erstellen

                              CodierknechtC Online
                              CodierknechtC Online
                              Codierknecht
                              Developer Most Active
                              schrieb am zuletzt editiert von
                              #28

                              @scrounger sagte in Test Adapter Unifi Network:

                              Test mal die v1.1.4, hab ein paar debug info mit eingebaut, damit man sieht was er da genau macht

                              unifi-network.0
                              2025-10-06 11:25:53.661	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                              unifi-network.0
                              2025-10-06 11:25:50.633	info	[login]: WebSocket connection to realtime API successfully established
                              unifi-network.0
                              2025-10-06 11:25:50.630	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
                              unifi-network.0
                              2025-10-06 11:25:50.629	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                              unifi-network.0
                              2025-10-06 11:25:50.302	debug	[NetworkApi.logout] Logging out and clearing credentials.
                              unifi-network.0
                              2025-10-06 11:25:50.292	debug	[NetworkApi.logout] Logging out and clearing credentials.
                              unifi-network.0
                              2025-10-06 11:25:50.292	warn	[aliveChecker]: No connection to the Unifi-Network controller -> restart connection (retries: 0, no data since 55s)
                              unifi-network.0
                              2025-10-06 11:25:20.281	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                              unifi-network.0
                              2025-10-06 11:25:20.261	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                              unifi-network.0
                              2025-10-06 11:25:20.231	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                              unifi-network.0
                              2025-10-06 11:25:20.120	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/wlan/enriched-configuration)
                              unifi-network.0
                              2025-10-06 11:25:17.100	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/wlan/enriched-configuration)
                              unifi-network.0
                              2025-10-06 11:25:14.060	debug	[createOrUpdateChannel]: creating channel 'wlan'
                              unifi-network.0
                              2025-10-06 11:25:14.053	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/history?includeUnifiDevices=true&withinHours=0)
                              unifi-network.0
                              2025-10-06 11:25:11.024	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/history?includeUnifiDevices=true&withinHours=0)
                              unifi-network.0
                              2025-10-06 11:25:07.992	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/active?includeTrafficUsage=false&includeUnifiDevices=true)
                              unifi-network.0
                              2025-10-06 11:25:04.964	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/active?includeTrafficUsage=false&includeUnifiDevices=true)
                              unifi-network.0
                              2025-10-06 11:25:01.941	debug	[createOrUpdateChannel]: creating channel 'clients'
                              unifi-network.0
                              2025-10-06 11:25:01.939	debug	[createOrUpdateChannel]: creating channel 'clients.vpn'
                              unifi-network.0
                              2025-10-06 11:25:01.937	debug	[createOrUpdateChannel]: creating channel 'clients.guests'
                              unifi-network.0
                              2025-10-06 11:25:01.934	debug	[createOrUpdateChannel]: creating channel 'clients.users'
                              unifi-network.0
                              2025-10-06 11:25:01.929	debug	[createOrUpdateChannel]: creating channel 'devices'
                              unifi-network.0
                              2025-10-06 11:25:01.927	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                              unifi-network.0
                              2025-10-06 11:24:58.905	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                              unifi-network.0
                              2025-10-06 11:24:55.850	info	[login]: WebSocket connection to realtime API successfully established
                              unifi-network.0
                              2025-10-06 11:24:55.836	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                              unifi-network.0
                              2025-10-06 11:24:55.565	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
                              unifi-network.0
                              2025-10-06 11:24:55.564	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                              unifi-network.0
                              2025-10-06 11:24:55.325	debug	[NetworkApi.logout] Logging out and clearing credentials.
                              unifi-network.0
                              2025-10-06 11:24:55.325	debug	[NetworkApi.detectUnifiOs] self hosted controller detected
                              unifi-network.0
                              2025-10-06 11:24:55.325	debug	[NetworkApi.detectUnifiOs] detect self hosted controller repsonse: {"statusCode":302,"headers":{"location":"/manage","content-length":"0","date":"Mon, 06 Oct 2025 09:24:55 GMT","keep-alive":"timeout=30","connection":"keep-alive"},"trailers":{},"opaque":null,"body":{"_events":{},"_readableState":{"highWaterMark":65536,"buffer":[],"bufferIndex":0,"length":0,"pipes":[],"awaitDrainWriters":null}}}
                              unifi-network.0
                              2025-10-06 11:24:55.282	info	starting. Version 1.1.4 (non-npm: Scrounger/ioBroker.unifi-network) in /opt/iobroker/node_modules/iobroker.unifi-network, node: v22.20.0, js-controller: 7.0.7
                              unifi-network.0
                              2025-10-06 11:24:55.193	debug	States connected to redis: 0.0.0.0:9010
                              unifi-network.0
                              2025-10-06 11:24:55.137	debug	States create User PubSub Client
                              unifi-network.0
                              2025-10-06 11:24:55.136	debug	States create System PubSub Client
                              unifi-network.0
                              2025-10-06 11:24:55.131	debug	Redis States: Use Redis connection: 0.0.0.0:9010
                              unifi-network.0
                              2025-10-06 11:24:55.118	debug	Objects connected to redis: 0.0.0.0:9011
                              unifi-network.0
                              2025-10-06 11:24:55.116	debug	Objects client initialize lua scripts
                              unifi-network.0
                              2025-10-06 11:24:55.097	debug	Objects create User PubSub Client
                              unifi-network.0
                              2025-10-06 11:24:55.096	debug	Objects create System PubSub Client
                              unifi-network.0
                              2025-10-06 11:24:55.095	debug	Objects client ready ... initialize now
                              unifi-network.0
                              2025-10-06 11:24:55.082	debug	Redis Objects: Use Redis connection: 0.0.0.0:9011
                              

                              Geht gleich auch noch an GH

                              "Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")

                              Proxmox 9.1.1 LXC|8 GB|Core i7-6700
                              HmIP|ZigBee|Tasmota|Unifi
                              Zabbix Certified Specialist
                              Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag

                              CodierknechtC 1 Antwort Letzte Antwort
                              0
                              • CodierknechtC Codierknecht

                                @scrounger sagte in Test Adapter Unifi Network:

                                Test mal die v1.1.4, hab ein paar debug info mit eingebaut, damit man sieht was er da genau macht

                                unifi-network.0
                                2025-10-06 11:25:53.661	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                                unifi-network.0
                                2025-10-06 11:25:50.633	info	[login]: WebSocket connection to realtime API successfully established
                                unifi-network.0
                                2025-10-06 11:25:50.630	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
                                unifi-network.0
                                2025-10-06 11:25:50.629	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                                unifi-network.0
                                2025-10-06 11:25:50.302	debug	[NetworkApi.logout] Logging out and clearing credentials.
                                unifi-network.0
                                2025-10-06 11:25:50.292	debug	[NetworkApi.logout] Logging out and clearing credentials.
                                unifi-network.0
                                2025-10-06 11:25:50.292	warn	[aliveChecker]: No connection to the Unifi-Network controller -> restart connection (retries: 0, no data since 55s)
                                unifi-network.0
                                2025-10-06 11:25:20.281	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                                unifi-network.0
                                2025-10-06 11:25:20.261	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                                unifi-network.0
                                2025-10-06 11:25:20.231	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }
                                unifi-network.0
                                2025-10-06 11:25:20.120	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/wlan/enriched-configuration)
                                unifi-network.0
                                2025-10-06 11:25:17.100	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/wlan/enriched-configuration)
                                unifi-network.0
                                2025-10-06 11:25:14.060	debug	[createOrUpdateChannel]: creating channel 'wlan'
                                unifi-network.0
                                2025-10-06 11:25:14.053	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/history?includeUnifiDevices=true&withinHours=0)
                                unifi-network.0
                                2025-10-06 11:25:11.024	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/history?includeUnifiDevices=true&withinHours=0)
                                unifi-network.0
                                2025-10-06 11:25:07.992	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/active?includeTrafficUsage=false&includeUnifiDevices=true)
                                unifi-network.0
                                2025-10-06 11:25:04.964	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/clients/active?includeTrafficUsage=false&includeUnifiDevices=true)
                                unifi-network.0
                                2025-10-06 11:25:01.941	debug	[createOrUpdateChannel]: creating channel 'clients'
                                unifi-network.0
                                2025-10-06 11:25:01.939	debug	[createOrUpdateChannel]: creating channel 'clients.vpn'
                                unifi-network.0
                                2025-10-06 11:25:01.937	debug	[createOrUpdateChannel]: creating channel 'clients.guests'
                                unifi-network.0
                                2025-10-06 11:25:01.934	debug	[createOrUpdateChannel]: creating channel 'clients.users'
                                unifi-network.0
                                2025-10-06 11:25:01.929	debug	[createOrUpdateChannel]: creating channel 'devices'
                                unifi-network.0
                                2025-10-06 11:25:01.927	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                                unifi-network.0
                                2025-10-06 11:24:58.905	error	[NetworkApi._retrieve] Unable to connect to the Network controller. This is temporary and may occur during device reboots (url: https://192.168.179.13:8443/v2/api/site/D*****V/device?separateUnmanaged=false&includeTrafficUsage=false)
                                unifi-network.0
                                2025-10-06 11:24:55.850	info	[login]: WebSocket connection to realtime API successfully established
                                unifi-network.0
                                2025-10-06 11:24:55.836	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                                unifi-network.0
                                2025-10-06 11:24:55.565	info	[login]: Logged in successfully to the Unifi-Network controller (host: 192.168.179.13:8443, site: D*****V, isUnifiOs: false)
                                unifi-network.0
                                2025-10-06 11:24:55.564	debug	[NetworkApi.loginController] login to self hosted UniFi controller successful.
                                unifi-network.0
                                2025-10-06 11:24:55.325	debug	[NetworkApi.logout] Logging out and clearing credentials.
                                unifi-network.0
                                2025-10-06 11:24:55.325	debug	[NetworkApi.detectUnifiOs] self hosted controller detected
                                unifi-network.0
                                2025-10-06 11:24:55.325	debug	[NetworkApi.detectUnifiOs] detect self hosted controller repsonse: {"statusCode":302,"headers":{"location":"/manage","content-length":"0","date":"Mon, 06 Oct 2025 09:24:55 GMT","keep-alive":"timeout=30","connection":"keep-alive"},"trailers":{},"opaque":null,"body":{"_events":{},"_readableState":{"highWaterMark":65536,"buffer":[],"bufferIndex":0,"length":0,"pipes":[],"awaitDrainWriters":null}}}
                                unifi-network.0
                                2025-10-06 11:24:55.282	info	starting. Version 1.1.4 (non-npm: Scrounger/ioBroker.unifi-network) in /opt/iobroker/node_modules/iobroker.unifi-network, node: v22.20.0, js-controller: 7.0.7
                                unifi-network.0
                                2025-10-06 11:24:55.193	debug	States connected to redis: 0.0.0.0:9010
                                unifi-network.0
                                2025-10-06 11:24:55.137	debug	States create User PubSub Client
                                unifi-network.0
                                2025-10-06 11:24:55.136	debug	States create System PubSub Client
                                unifi-network.0
                                2025-10-06 11:24:55.131	debug	Redis States: Use Redis connection: 0.0.0.0:9010
                                unifi-network.0
                                2025-10-06 11:24:55.118	debug	Objects connected to redis: 0.0.0.0:9011
                                unifi-network.0
                                2025-10-06 11:24:55.116	debug	Objects client initialize lua scripts
                                unifi-network.0
                                2025-10-06 11:24:55.097	debug	Objects create User PubSub Client
                                unifi-network.0
                                2025-10-06 11:24:55.096	debug	Objects create System PubSub Client
                                unifi-network.0
                                2025-10-06 11:24:55.095	debug	Objects client ready ... initialize now
                                unifi-network.0
                                2025-10-06 11:24:55.082	debug	Redis Objects: Use Redis connection: 0.0.0.0:9011
                                

                                Geht gleich auch noch an GH

                                CodierknechtC Online
                                CodierknechtC Online
                                Codierknecht
                                Developer Most Active
                                schrieb am zuletzt editiert von
                                #29

                                @Scrounger

                                Mit einer Site "default" klappt's dann auch. Issue habe ich geschlossen.

                                "Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")

                                Proxmox 9.1.1 LXC|8 GB|Core i7-6700
                                HmIP|ZigBee|Tasmota|Unifi
                                Zabbix Certified Specialist
                                Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag

                                ScroungerS 1 Antwort Letzte Antwort
                                0
                                • CodierknechtC Codierknecht

                                  @Scrounger

                                  Mit einer Site "default" klappt's dann auch. Issue habe ich geschlossen.

                                  ScroungerS Offline
                                  ScroungerS Offline
                                  Scrounger
                                  Developer
                                  schrieb am zuletzt editiert von
                                  #30

                                  @codierknecht
                                  Hab jetzt noch ne Prüfung eingebaut, die anzeigt welche Sites überhaupt verfügbar sind und bei falscher Eingabe ne Error Meldung wirft

                                  <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

                                  <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

                                  CodierknechtC 1 Antwort Letzte Antwort
                                  1
                                  • ScroungerS Scrounger

                                    @codierknecht
                                    Hab jetzt noch ne Prüfung eingebaut, die anzeigt welche Sites überhaupt verfügbar sind und bei falscher Eingabe ne Error Meldung wirft

                                    CodierknechtC Online
                                    CodierknechtC Online
                                    Codierknecht
                                    Developer Most Active
                                    schrieb am zuletzt editiert von
                                    #31

                                    @scrounger

                                    Die automatische Übersetzung hat wieder zugeschlagen :grin:

                                    3732c4d4-a9c4-4b34-afd0-273687ff6bd6-grafik.png

                                    "Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")

                                    Proxmox 9.1.1 LXC|8 GB|Core i7-6700
                                    HmIP|ZigBee|Tasmota|Unifi
                                    Zabbix Certified Specialist
                                    Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag

                                    ScroungerS 1 Antwort Letzte Antwort
                                    0
                                    • CodierknechtC Codierknecht

                                      @scrounger

                                      Die automatische Übersetzung hat wieder zugeschlagen :grin:

                                      3732c4d4-a9c4-4b34-afd0-273687ff6bd6-grafik.png

                                      ScroungerS Offline
                                      ScroungerS Offline
                                      Scrounger
                                      Developer
                                      schrieb am zuletzt editiert von
                                      #32

                                      @codierknecht sagte in Test Adapter Unifi Network:

                                      @scrounger

                                      Die automatische Übersetzung hat wieder zugeschlagen :grin:

                                      Tja da gibt's noch nen paar andere so klöpse drin
                                      Wenn ihr mithelfen wollt dann erstellt nen PR mit korrigierten Übersetzungen.

                                      <a href="https://github.com/Scrounger/ioBroker.linkeddevices">LinkedDevices Adapter</a>

                                      <a href="https://github.com/Scrounger/ioBroker.vis-materialdesign">Material Design Widgets</a>

                                      1 Antwort Letzte Antwort
                                      0
                                      • O Offline
                                        O Offline
                                        oxident
                                        schrieb am zuletzt editiert von
                                        #33

                                        Tolle Idee mit dem Adapter ... und danke, dass Du das öffentlich verfügbar machst.

                                        Leider ist bei mir wohl ein Rebuild bei der Installation nötig ... und der schlägt mit NodeJS 22.20.0 fehl da das Modul "TokenRefresher" nicht gefunden werden kann. Habe ein Issue unter https://github.com/Scrounger/ioBroker.unifi-network/issues/33 aufgemacht.

                                        1 Antwort Letzte Antwort
                                        0
                                        • D Offline
                                          D Offline
                                          Dragon
                                          schrieb am zuletzt editiert von
                                          #34

                                          Kann die Zugangsdaten nicht speichern. Er gibt jedes mal einen Json error und die Daten sind wieder leer.

                                          ScroungerS 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          634

                                          Online

                                          32.4k

                                          Benutzer

                                          81.4k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe