NEWS
Updateschwierigkeiten js-controller 4.0.23
ioBroker Allgemein
33
Beiträge
4
Kommentatoren
4.6k
Aufrufe
6
Watching
-
Hallo zusammen, ich hoffe ihr könnt mir helfen. Mir wurde das System von einem Bekannten aufgespielt, daher bin ich etwas unbeholfen. Lerne zwar ständig hinzu, aber dies überfordert mich doch etwas :)
Nochmal kurz zum Hintergrund: Haben vorletztes Jahr eine Immobilie erworben, dort wurde vom Vorbesitzer das gesamte Smarthome auf FHEM aufgebaut, welches aber nicht richtig lief. Da sich mein Bekannter mit Iobroker auskannte, hat er mir angeboten, mir die Basis aufzuspielen, worüber ich echt happy bin, da ich von der Materie 0 Ahnung hatte. Von dort an habe ich mich über das Forum soweit es geht alleine mit der Thematik beschäftigt und dies so gut es mir möglich war getüftelt. Das Thema Updates habe ich ehrlicherweise etwas verdrängt, nur die normalen Adapter-Updates habe ich durchgeführt. Nun merke ich langsam, dass einige Adapter nicht mehr aktualisiert werden. Da ich nicht ständig auf meinen Bekannten zurückgreifen kann und will, muss ich hier ohne Ihn zurecht kommen.
Soweit so gut, habe über die im Forum beschriebene Update-Anleitung versucht mir selbst weiterzuhelfen. Leider hat sich der js controller nicht aktualisiert, so sah es im Terminal aus:
inux IoBroker 5.15.76-v8+ #1597 SMP PREEMPT Fri Nov 4 12:16:41 GMT 2022 aarch64 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@IoBroker:~ $ cd /opt/iobroker/ pi@IoBroker:/opt/iobroker $ sudo iobroker stop pi@IoBroker:/opt/iobroker $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] pi@IoBroker:/opt/iobroker $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.19.3 Installing iobroker.js-controller@6.0.11... (System call) pi@IoBroker:/opt/iobroker $ sudo iobroker start pi@IoBroker:/opt/iobroker $Das oben habe ich mir soweit zugetraut, alles was folgt macht mir etwas Angst das gesamte System zu zerschießen. Backups habe ich täglich über backitup laufen (ccu und iobroker)
Habe eine diag Ausgabe über das Terminal durchgeführt, dort sieht man auch dass irgendwas nicht richtig installiert scheint:
bash Skript v.2024-08-12 107*** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:14:15 up 67 days, 23:09, 0 users, load average: 0.69, 0.65, 0.75 CPU threads: 4 107*** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. 107*** Time and Time Zones *** Local time: Mon 2024-10-07 20:14:15 CEST Universal time: Mon 2024-10-07 18:14:15 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no 107*** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c 107*** Display-Server-Setup *** Display-Server: true Desktop: Terminal: Boot Target: multi-user.target 107*** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.7G 932M 1.0M 1.1G 2.0G Swap: 99M 0.0K 99M Total: 3.9G 1.7G 1.0G Active iob-Instances: 27 3794 M total memory 1732 M used memory 613 M active memory 2044 M inactive memory 932 M free memory 86 M buffer memory 1043 M swap cache 99 M total swap 0 M used swap 99 M free swap 107*** top - Table Of Processes *** top - 20:14:15 up 67 days, 23:09, 0 users, load average: 0.71, 0.66, 0.75 Tasks: 195 total, 1 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.2 us, 4.2 sy, 0.0 ni, 90.1 id, 0.0 wa, 0.0 hi, 1.4 si, 0.0 st MiB Mem : 3794.4 total, 931.5 free, 1732.4 used, 1130.4 buff/cache MiB Swap: 100.0 total, 99.5 free, 0.5 used. 1969.0 avail Mem 107*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. 107*** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 6.7G 50G 12% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot Messages concerning ext4 filesystem in dmesg: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo : a password is required Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 1.4G in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 288M /opt/iobroker/iobroker-data/ 223M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 49M /opt/iobroker/iobroker-data/backup-objects 48M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! 107*** NodeJS-Installation *** nodejs: N/A /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 /usr/bin/corepack 0.15.1 *** nodejs is NOT correctly installed *** nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 107*** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 7.0.22 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 7457 States: 5827 107*** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://security.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:6 https://www.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 186 107*** Listening Ports *** We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required 107*** Log File - Last 25 Lines *** 2024-10-07 20:13:04.852 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:30.107 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533020 2024-10-07 20:13:33.014 - info: netatmo-crawler.0 (2533020) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:13:33.101 - info: netatmo-crawler.0 (2533020) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:13:34.414 - info: netatmo-crawler.0 (2533020) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:13:34.960 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:51.864 - info: ham.0 (2501041) stateChange ham.0.Babyphone.Babyphone-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD5+XAAAAAAAAAQE=","ack":true,"ts":1728324831861,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831861} 2024-10-07 20:13:51.867 - info: ham.0 (2501041) stateChange ham.0.Stehlampe.Stehlampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD/uVAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.870 - info: ham.0 (2501041) stateChange ham.0.Lampe.Lampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD7+VAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.876 - info: ham.0 (2501041) stateChange ham.0.TV.TV-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD2eXAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:14:00.124 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533128 2024-10-07 20:14:03.308 - info: netatmo-crawler.0 (2533128) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:03.386 - info: netatmo-crawler.0 (2533128) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:04.379 - info: netatmo-crawler.0 (2533128) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:04.922 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:14:30.128 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533359 2024-10-07 20:14:33.334 - info: netatmo-crawler.0 (2533359) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:33.422 - info: netatmo-crawler.0 (2533359) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:34.273 - info: netatmo-crawler.0 (2533359) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:34.814 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:15:00.139 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533985 2024-10-07 20:15:03.377 - info: netatmo-crawler.0 (2533985) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:15:03.487 - info: netatmo-crawler.0 (2533985) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:15:05.818 - info: netatmo-crawler.0 (2533985) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:15:06.394 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)Könnt Ihr mir hier etwas weiterhelfen? Wie komme ich weiter um die Software auf den neusten Stand zu bekommen?
Tausend Dank vorab
-
Hallo zusammen, ich hoffe ihr könnt mir helfen. Mir wurde das System von einem Bekannten aufgespielt, daher bin ich etwas unbeholfen. Lerne zwar ständig hinzu, aber dies überfordert mich doch etwas :)
Nochmal kurz zum Hintergrund: Haben vorletztes Jahr eine Immobilie erworben, dort wurde vom Vorbesitzer das gesamte Smarthome auf FHEM aufgebaut, welches aber nicht richtig lief. Da sich mein Bekannter mit Iobroker auskannte, hat er mir angeboten, mir die Basis aufzuspielen, worüber ich echt happy bin, da ich von der Materie 0 Ahnung hatte. Von dort an habe ich mich über das Forum soweit es geht alleine mit der Thematik beschäftigt und dies so gut es mir möglich war getüftelt. Das Thema Updates habe ich ehrlicherweise etwas verdrängt, nur die normalen Adapter-Updates habe ich durchgeführt. Nun merke ich langsam, dass einige Adapter nicht mehr aktualisiert werden. Da ich nicht ständig auf meinen Bekannten zurückgreifen kann und will, muss ich hier ohne Ihn zurecht kommen.
Soweit so gut, habe über die im Forum beschriebene Update-Anleitung versucht mir selbst weiterzuhelfen. Leider hat sich der js controller nicht aktualisiert, so sah es im Terminal aus:
inux IoBroker 5.15.76-v8+ #1597 SMP PREEMPT Fri Nov 4 12:16:41 GMT 2022 aarch64 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@IoBroker:~ $ cd /opt/iobroker/ pi@IoBroker:/opt/iobroker $ sudo iobroker stop pi@IoBroker:/opt/iobroker $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] pi@IoBroker:/opt/iobroker $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.19.3 Installing iobroker.js-controller@6.0.11... (System call) pi@IoBroker:/opt/iobroker $ sudo iobroker start pi@IoBroker:/opt/iobroker $Das oben habe ich mir soweit zugetraut, alles was folgt macht mir etwas Angst das gesamte System zu zerschießen. Backups habe ich täglich über backitup laufen (ccu und iobroker)
Habe eine diag Ausgabe über das Terminal durchgeführt, dort sieht man auch dass irgendwas nicht richtig installiert scheint:
bash Skript v.2024-08-12 107*** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:14:15 up 67 days, 23:09, 0 users, load average: 0.69, 0.65, 0.75 CPU threads: 4 107*** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. 107*** Time and Time Zones *** Local time: Mon 2024-10-07 20:14:15 CEST Universal time: Mon 2024-10-07 18:14:15 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no 107*** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c 107*** Display-Server-Setup *** Display-Server: true Desktop: Terminal: Boot Target: multi-user.target 107*** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.7G 932M 1.0M 1.1G 2.0G Swap: 99M 0.0K 99M Total: 3.9G 1.7G 1.0G Active iob-Instances: 27 3794 M total memory 1732 M used memory 613 M active memory 2044 M inactive memory 932 M free memory 86 M buffer memory 1043 M swap cache 99 M total swap 0 M used swap 99 M free swap 107*** top - Table Of Processes *** top - 20:14:15 up 67 days, 23:09, 0 users, load average: 0.71, 0.66, 0.75 Tasks: 195 total, 1 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.2 us, 4.2 sy, 0.0 ni, 90.1 id, 0.0 wa, 0.0 hi, 1.4 si, 0.0 st MiB Mem : 3794.4 total, 931.5 free, 1732.4 used, 1130.4 buff/cache MiB Swap: 100.0 total, 99.5 free, 0.5 used. 1969.0 avail Mem 107*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. 107*** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 6.7G 50G 12% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot Messages concerning ext4 filesystem in dmesg: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo : a password is required Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 1.4G in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 288M /opt/iobroker/iobroker-data/ 223M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 49M /opt/iobroker/iobroker-data/backup-objects 48M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! 107*** NodeJS-Installation *** nodejs: N/A /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 /usr/bin/corepack 0.15.1 *** nodejs is NOT correctly installed *** nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 107*** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 7.0.22 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 7457 States: 5827 107*** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://security.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:6 https://www.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 186 107*** Listening Ports *** We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required 107*** Log File - Last 25 Lines *** 2024-10-07 20:13:04.852 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:30.107 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533020 2024-10-07 20:13:33.014 - info: netatmo-crawler.0 (2533020) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:13:33.101 - info: netatmo-crawler.0 (2533020) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:13:34.414 - info: netatmo-crawler.0 (2533020) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:13:34.960 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:51.864 - info: ham.0 (2501041) stateChange ham.0.Babyphone.Babyphone-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD5+XAAAAAAAAAQE=","ack":true,"ts":1728324831861,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831861} 2024-10-07 20:13:51.867 - info: ham.0 (2501041) stateChange ham.0.Stehlampe.Stehlampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD/uVAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.870 - info: ham.0 (2501041) stateChange ham.0.Lampe.Lampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD7+VAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.876 - info: ham.0 (2501041) stateChange ham.0.TV.TV-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD2eXAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:14:00.124 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533128 2024-10-07 20:14:03.308 - info: netatmo-crawler.0 (2533128) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:03.386 - info: netatmo-crawler.0 (2533128) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:04.379 - info: netatmo-crawler.0 (2533128) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:04.922 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:14:30.128 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533359 2024-10-07 20:14:33.334 - info: netatmo-crawler.0 (2533359) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:33.422 - info: netatmo-crawler.0 (2533359) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:34.273 - info: netatmo-crawler.0 (2533359) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:34.814 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:15:00.139 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533985 2024-10-07 20:15:03.377 - info: netatmo-crawler.0 (2533985) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:15:03.487 - info: netatmo-crawler.0 (2533985) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:15:05.818 - info: netatmo-crawler.0 (2533985) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:15:06.394 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)Könnt Ihr mir hier etwas weiterhelfen? Wie komme ich weiter um die Software auf den neusten Stand zu bekommen?
Tausend Dank vorab
Wenn du hier ein wenig mitgelesen hast, dann solltest du gefühlte 100 Mal darüber gestolpert sein iob Befehle NIE NIE NIE mit sudo abzusetzen.
@Thomas-Braun wird dir (hoffentlich) helfen dein System zu richten. Mögloicherweise reicht schon ein
iob fixNormalerweise wird der js-controller mittels iobroker update self aktualisisert. Die entsprechende Info findest du jedesmal in den js-controller Topics.
ABER ACHTUNG:
Du bist mit js-controlelr 4 auf Museumsniveau. Aktuell ist js-controller 6, im LATEST / BETA Test ist js-controller 7Du solltes Schrittweise aktualisieren:
js-controller 4 -> js-controller 5 -> js-controller 6Da ich die genauen Schritte für diese Vorgangsweise nicht sicher im Kopf habe, warte bis sie jemand postet.
Weiters ist Debian 11 / bullseye noch gewartet, du solltest aber eine Neuinstallation mit Debian 12 planen. Da ein Update von 11 auf 12 NICHT möglich ist un in jedem Fall eine Neuinstallation erfordert kannst du auch überlegen gleich Debian 12 zu installieren und die ioBroker Installation aus dem Backup zu restaurieren. Wenn du eine SD Karte verwendest, ist das ja mit 0 Risiko verbunden - einfach eine neue Karte verwenden - die alte bleibt als Fallback unverändert.
Aber wart jetzt mal auf Thomas was er sonst noch so sieht
DANKE jedenfalls schon mal fürs mitgesendete iob diag file. -
Hallo zusammen, ich hoffe ihr könnt mir helfen. Mir wurde das System von einem Bekannten aufgespielt, daher bin ich etwas unbeholfen. Lerne zwar ständig hinzu, aber dies überfordert mich doch etwas :)
Nochmal kurz zum Hintergrund: Haben vorletztes Jahr eine Immobilie erworben, dort wurde vom Vorbesitzer das gesamte Smarthome auf FHEM aufgebaut, welches aber nicht richtig lief. Da sich mein Bekannter mit Iobroker auskannte, hat er mir angeboten, mir die Basis aufzuspielen, worüber ich echt happy bin, da ich von der Materie 0 Ahnung hatte. Von dort an habe ich mich über das Forum soweit es geht alleine mit der Thematik beschäftigt und dies so gut es mir möglich war getüftelt. Das Thema Updates habe ich ehrlicherweise etwas verdrängt, nur die normalen Adapter-Updates habe ich durchgeführt. Nun merke ich langsam, dass einige Adapter nicht mehr aktualisiert werden. Da ich nicht ständig auf meinen Bekannten zurückgreifen kann und will, muss ich hier ohne Ihn zurecht kommen.
Soweit so gut, habe über die im Forum beschriebene Update-Anleitung versucht mir selbst weiterzuhelfen. Leider hat sich der js controller nicht aktualisiert, so sah es im Terminal aus:
inux IoBroker 5.15.76-v8+ #1597 SMP PREEMPT Fri Nov 4 12:16:41 GMT 2022 aarch64 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@IoBroker:~ $ cd /opt/iobroker/ pi@IoBroker:/opt/iobroker $ sudo iobroker stop pi@IoBroker:/opt/iobroker $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] pi@IoBroker:/opt/iobroker $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.19.3 Installing iobroker.js-controller@6.0.11... (System call) pi@IoBroker:/opt/iobroker $ sudo iobroker start pi@IoBroker:/opt/iobroker $Das oben habe ich mir soweit zugetraut, alles was folgt macht mir etwas Angst das gesamte System zu zerschießen. Backups habe ich täglich über backitup laufen (ccu und iobroker)
Habe eine diag Ausgabe über das Terminal durchgeführt, dort sieht man auch dass irgendwas nicht richtig installiert scheint:
bash Skript v.2024-08-12 107*** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:14:15 up 67 days, 23:09, 0 users, load average: 0.69, 0.65, 0.75 CPU threads: 4 107*** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. 107*** Time and Time Zones *** Local time: Mon 2024-10-07 20:14:15 CEST Universal time: Mon 2024-10-07 18:14:15 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no 107*** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c 107*** Display-Server-Setup *** Display-Server: true Desktop: Terminal: Boot Target: multi-user.target 107*** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.7G 932M 1.0M 1.1G 2.0G Swap: 99M 0.0K 99M Total: 3.9G 1.7G 1.0G Active iob-Instances: 27 3794 M total memory 1732 M used memory 613 M active memory 2044 M inactive memory 932 M free memory 86 M buffer memory 1043 M swap cache 99 M total swap 0 M used swap 99 M free swap 107*** top - Table Of Processes *** top - 20:14:15 up 67 days, 23:09, 0 users, load average: 0.71, 0.66, 0.75 Tasks: 195 total, 1 running, 194 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.2 us, 4.2 sy, 0.0 ni, 90.1 id, 0.0 wa, 0.0 hi, 1.4 si, 0.0 st MiB Mem : 3794.4 total, 931.5 free, 1732.4 used, 1130.4 buff/cache MiB Swap: 100.0 total, 99.5 free, 0.5 used. 1969.0 avail Mem 107*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. 107*** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 6.7G 50G 12% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot Messages concerning ext4 filesystem in dmesg: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo : a password is required Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 1.4G in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 288M /opt/iobroker/iobroker-data/ 223M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 49M /opt/iobroker/iobroker-data/backup-objects 48M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! 107*** NodeJS-Installation *** nodejs: N/A /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 /usr/bin/corepack 0.15.1 *** nodejs is NOT correctly installed *** nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 107*** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 7.0.22 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 7457 States: 5827 107*** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://security.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:6 https://www.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 186 107*** Listening Ports *** We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper sudo: a password is required 107*** Log File - Last 25 Lines *** 2024-10-07 20:13:04.852 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:30.107 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533020 2024-10-07 20:13:33.014 - info: netatmo-crawler.0 (2533020) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:13:33.101 - info: netatmo-crawler.0 (2533020) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:13:34.414 - info: netatmo-crawler.0 (2533020) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:13:34.960 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:13:51.864 - info: ham.0 (2501041) stateChange ham.0.Babyphone.Babyphone-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD5+XAAAAAAAAAQE=","ack":true,"ts":1728324831861,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831861} 2024-10-07 20:13:51.867 - info: ham.0 (2501041) stateChange ham.0.Stehlampe.Stehlampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD/uVAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.870 - info: ham.0 (2501041) stateChange ham.0.Lampe.Lampe-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD7+VAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:13:51.876 - info: ham.0 (2501041) stateChange ham.0.TV.TV-History.S2R1 {"val":"W36DAQAAAAAF3jArAQ4BwA/AD2eXAAAAAAAAAQE=","ack":true,"ts":1728324831862,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1728324831862} 2024-10-07 20:14:00.124 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533128 2024-10-07 20:14:03.308 - info: netatmo-crawler.0 (2533128) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:03.386 - info: netatmo-crawler.0 (2533128) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:04.379 - info: netatmo-crawler.0 (2533128) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:04.922 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:14:30.128 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533359 2024-10-07 20:14:33.334 - info: netatmo-crawler.0 (2533359) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:14:33.422 - info: netatmo-crawler.0 (2533359) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:14:34.273 - info: netatmo-crawler.0 (2533359) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:14:34.814 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-07 20:15:00.139 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2533985 2024-10-07 20:15:03.377 - info: netatmo-crawler.0 (2533985) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.0, js-controller: 4.0.23 2024-10-07 20:15:03.487 - info: netatmo-crawler.0 (2533985) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-07 20:15:05.818 - info: netatmo-crawler.0 (2533985) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-07 20:15:06.394 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)Könnt Ihr mir hier etwas weiterhelfen? Wie komme ich weiter um die Software auf den neusten Stand zu bekommen?
Tausend Dank vorab
@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
Wiedermal ein paar Klassiker der Fehlbedienung des iobroker...
sudo iobroker stop
iobroker-Kommandos werden NIE per sudo eingeleitet.
nur die normalen Adapter-Updates habe ich durchgeführt.
Die aber auch eher spordisch.
Operating System: Debian GNU/Linux 11 (bullseye)
Das musst du in nächster Zeit komplett NEU installieren, ein inline-Upgrade auf Version 12 'Bookworm' funktioniert auf dem Raspberry nicht.
User that called 'iob diag':
iobrokerMan verwendet einen eigenen User, der nicht 'iobroker' heißt.
flowskioder dein Vorname wären sinnvoller.Display-Server: true
Boot Target: multi-user.targetKann eigentlich nicht sein. Entweder ist ein false positive in iob diag drin oder du hast nach der Umstellung auf multi-user.target die Kiste nicht neugestartet.
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
Der user iobroker ist (was vollkommen korrekt ist) nicht in der entsprechenden Gruppe drin. Der hat also keine erweiterten sudo-Rechte. Aber da man ja eh einen eigenen User verwendet kannst/solltest du den direkt in die Gruppe sudo packen. Log dich doch als pi ein, der wird ja bei der Installation direkt angelegt, wenn man keinen eigenen username vergibt.
*** nodejs is NOT correctly installed ***
Stimmt. Führe
iob nodejs-updateaus. Allerdings braucht es dazu einen user, der sudo-Rechte hat.
Ein Upgrade der ganzen ioBroker-Adapter und des js-controllers setzen ein aktuelles nodejs voraus.
Die 186 in der Pipeline hängenden OS-Updates setzen einen user mit sudo-Rechten voraus.
sudo apt update sudo apt full-upgrade sudo rebootwäre das dann.
-
Hi und danke für alle Tipps, werde versuchen diese nach und nach umzusetzen, auch wenn mir einiges noch sehr spanisch vorkommt.
Habe jetzt den user angelegt und in die Gruppen sudo und iobroker gepackt. anschließend user gewechselt mit su flowski
flowski@IoBroker:/home/pi $
gebe ich nun iob nodejs-update ein, erscheint eine Liste von Befehlen?
Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean]wie gehe ich weiter vor? Dachte mit dem Befehl würde schon direkt was angestoßen werden?
-
Hi und danke für alle Tipps, werde versuchen diese nach und nach umzusetzen, auch wenn mir einiges noch sehr spanisch vorkommt.
Habe jetzt den user angelegt und in die Gruppen sudo und iobroker gepackt. anschließend user gewechselt mit su flowski
flowski@IoBroker:/home/pi $
gebe ich nun iob nodejs-update ein, erscheint eine Liste von Befehlen?
Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean]wie gehe ich weiter vor? Dachte mit dem Befehl würde schon direkt was angestoßen werden?
-
und wenn Du mal in das Verzeichnis
/opt/iobroker wechselst....
Edit:
und ein aktuelles iob diag wäre auch noch mal wünschenswert
hier mal der iob diag, mehr als die summary hat er mir nicht übrig gelassen im Terminal
Copy text starting here: ```bash ======================= SUMMARY ======================= v.2024-08-12 Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1002 Display-Server: true Boot Target: multi-user.target Pending OS-Updates: 186 Pending iob updates: 19 Nodejs-Installation: nodejs: N/A /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 /usr/bin/corepack 0.15.1 Recommended versions are nodejs 20.18.0 and npm 10.8.2 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please execute iobroker nodejs-update to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.8G 2.0G 328M 1.0M 1.4G 1.7G Swap: 99M 0.0K 99M Total: 3.9G 2.0G 428M Active iob-Instances: 27 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 7.0.22 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 7457 States: 5827 Size of iob-Database: 17M /opt/iobroker/iobroker-data/objects.jsonl 7.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================hier mal nach wechsel vom Verzeichnis?
fabio@IoBroker:/home/pi $ cd /opt/iobroker fabio@IoBroker:/opt/iobroker $ iob nodejs-update iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] ``` -
hier mal der iob diag, mehr als die summary hat er mir nicht übrig gelassen im Terminal
Copy text starting here: ```bash ======================= SUMMARY ======================= v.2024-08-12 Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1002 Display-Server: true Boot Target: multi-user.target Pending OS-Updates: 186 Pending iob updates: 19 Nodejs-Installation: nodejs: N/A /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 /usr/bin/corepack 0.15.1 Recommended versions are nodejs 20.18.0 and npm 10.8.2 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please execute iobroker nodejs-update to fix these errors. MEMORY: total used free shared buff/cache available Mem: 3.8G 2.0G 328M 1.0M 1.4G 1.7G Swap: 99M 0.0K 99M Total: 3.9G 2.0G 428M Active iob-Instances: 27 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 7.0.22 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 7457 States: 5827 Size of iob-Database: 17M /opt/iobroker/iobroker-data/objects.jsonl 7.5M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================hier mal nach wechsel vom Verzeichnis?
fabio@IoBroker:/home/pi $ cd /opt/iobroker fabio@IoBroker:/opt/iobroker $ iob nodejs-update iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] ``` -
Hi, also ich habe das update soeben durchgeführt, anbei der Log. Was ich jetzt festgestellt habe, mein Homematic funktioniert nicht, der js-controller scheint nicht aktualisiert worden sein. Wie bekomme ich die neuen Fehler weg, bzw. was kann ich als nächstes probieren?
======== Start marking the full check here ========= ```bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:28:52 up 68 days, 23:24, 1 user, load average: 0.59, 0.91, 0.96 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred This system needs to be REBOOTED! *** Time and Time Zones *** Local time: Tue 2024-10-08 20:28:52 CEST Universal time: Tue 2024-10-08 18:28:52 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': fabio HOME=/home/fabio GROUPS=fabio sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.2G 467M 1.0M 2.1G 2.5G Swap: 99M 4.0M 95M Total: 3.9G 1.2G 562M Active iob-Instances: 25 3794 M total memory 1214 M used memory 686 M active memory 2214 M inactive memory 467 M free memory 246 M buffer memory 1866 M swap cache 99 M total swap 4 M used swap 95 M free swap *** top - Table Of Processes *** top - 20:28:53 up 68 days, 23:24, 1 user, load average: 0.59, 0.91, 0.96 Tasks: 178 total, 1 running, 177 sleeping, 0 stopped, 0 zombie %Cpu(s): 5.9 us, 1.5 sy, 0.0 ni, 91.2 id, 0.0 wa, 0.0 hi, 1.5 si, 0.0 st MiB Mem : 3794.4 total, 467.5 free, 1214.3 used, 2112.5 buff/cache MiB Swap: 100.0 total, 95.2 free, 4.8 used. 2503.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * pivccu-dkms.service loaded failed failed piVCCU DKMS Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 7.3G 49G 13% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jul 31 21:04:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:5A:83:48 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=2a0531f8-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jul 31 21:04:31 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Wed Jul 31 21:04:31 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): 5 orphan inodes deleted [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): recovery complete [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Wed Jul 31 21:04:32 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Jul 31 21:04:33 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: du: cannot access '/var/lib/lxcfs/cgroup': Input/output error 3.7G /var/ 2.1G /var/log/journal/664a8e581ec84405863df59a10cf9293 2.1G /var/log/journal 2.1G /var/log 817M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 289M /opt/iobroker/iobroker-data/ 223M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 49M /opt/iobroker/iobroker-data/backup-objects 48M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 13M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.18.0-1nodesource1 Version table: *** 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 7.0.22 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 7483 States: 5874 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://apt.pivccu.de/piVCCU stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 58165914 2710235/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 58154890 2703367/sshd: /usr/ tcp 0 0 192.168.178.46:1883 0.0.0.0:* LISTEN 1001 58165795 2710044/io.sonoff.0 tcp 0 0 192.168.178.46:2010 0.0.0.0:* LISTEN 1001 58169080 2711660/io.hm-rpc.1 tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 12078 1002/dnsmasq tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 58165557 2709771/iobroker.js tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 58165562 2709771/iobroker.js tcp6 0 0 :::22 :::* LISTEN 0 58154892 2703367/sshd: /usr/ tcp6 0 0 :::8082 :::* LISTEN 1001 58163825 2710216/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 58163169 2709798/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 58166661 2710413/io.terminal udp 0 0 0.0.0.0:40873 0.0.0.0:* 108 58158484 2704192/avahi-daemo udp 0 0 10.0.3.1:53 0.0.0.0:* 0 12077 1002/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 12074 1002/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12788 818/dhclient udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 58164896 2710024/io.mihome-v udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 58163791 2710178/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 58163792 2710178/io.tuya.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 58165133 2710082/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 58158482 2704192/avahi-daemo udp6 0 0 :::37109 :::* 108 58158485 2704192/avahi-daemo udp6 0 0 :::5353 :::* 108 58158483 2704192/avahi-daemo *** Log File - Last 25 Lines *** 2024-10-08 20:29:00.150 - info: hm-rpc.0 (2711496) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:00.528 - info: hm-rpc.0 (2711496) xmlrpc server is trying to listen on 192.168.178.46:2001 2024-10-08 20:29:00.530 - info: hm-rpc.0 (2711496) xmlrpc client is trying to connect to 192.168.178.47:2001/ with ["http://192.168.178.46:2001","IoBroker:hm-rpc.0:9ad5b2ff275462b51f6c8398ac38d247"] 2024-10-08 20:29:01.222 - error: hm-rega.0 (2709942) CCU 192.168.178.47 unreachable 2024-10-08 20:29:01.236 - error: hm-rpc.0 (2711496) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2001 2024-10-08 20:29:03.134 - info: netatmo-crawler.0 (2711519) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:03.224 - info: netatmo-crawler.0 (2711519) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 20:29:04.358 - info: netatmo-crawler.0 (2711519) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 20:29:04.909 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-08 20:29:18.018 - info: host.IoBroker instance system.adapter.hm-rpc.1 started with pid 2711660 2024-10-08 20:29:20.587 - info: hm-rpc.1 (2711660) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:20.822 - info: hm-rpc.1 (2711660) xmlrpc server is trying to listen on 192.168.178.46:2010 2024-10-08 20:29:20.824 - info: hm-rpc.1 (2711660) xmlrpc client is trying to connect to 192.168.178.47:2010/ with ["http://192.168.178.46:2010","IoBroker:hm-rpc.1:cad2942d81e0f42acf3bc327e357494b"] 2024-10-08 20:29:23.907 - error: hm-rpc.1 (2711660) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2010 2024-10-08 20:29:30.101 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2712236 2024-10-08 20:29:31.242 - info: hm-rpc.0 (2711496) xmlrpc -> 192.168.178.47:2001/ init ["http://192.168.178.46:2001",""] 2024-10-08 20:29:32.258 - info: hm-rpc.0 (2711496) terminating 2024-10-08 20:29:32.260 - info: hm-rpc.0 (2711496) Terminated (NO_ERROR): Without reason 2024-10-08 20:29:32.869 - info: host.IoBroker instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR) 2024-10-08 20:29:32.870 - info: host.IoBroker Restart adapter system.adapter.hm-rpc.0 because enabled 2024-10-08 20:29:33.296 - info: netatmo-crawler.0 (2712236) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:33.388 - info: netatmo-crawler.0 (2712236) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 20:29:33.630 - error: hm-rega.0 (2709942) CCU 192.168.178.47 unreachable 2024-10-08 20:29:34.686 - info: netatmo-crawler.0 (2712236) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 20:29:35.245 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
-
Hi, also ich habe das update soeben durchgeführt, anbei der Log. Was ich jetzt festgestellt habe, mein Homematic funktioniert nicht, der js-controller scheint nicht aktualisiert worden sein. Wie bekomme ich die neuen Fehler weg, bzw. was kann ich als nächstes probieren?
======== Start marking the full check here ========= ```bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:28:52 up 68 days, 23:24, 1 user, load average: 0.59, 0.91, 0.96 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred This system needs to be REBOOTED! *** Time and Time Zones *** Local time: Tue 2024-10-08 20:28:52 CEST Universal time: Tue 2024-10-08 18:28:52 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': fabio HOME=/home/fabio GROUPS=fabio sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.2G 467M 1.0M 2.1G 2.5G Swap: 99M 4.0M 95M Total: 3.9G 1.2G 562M Active iob-Instances: 25 3794 M total memory 1214 M used memory 686 M active memory 2214 M inactive memory 467 M free memory 246 M buffer memory 1866 M swap cache 99 M total swap 4 M used swap 95 M free swap *** top - Table Of Processes *** top - 20:28:53 up 68 days, 23:24, 1 user, load average: 0.59, 0.91, 0.96 Tasks: 178 total, 1 running, 177 sleeping, 0 stopped, 0 zombie %Cpu(s): 5.9 us, 1.5 sy, 0.0 ni, 91.2 id, 0.0 wa, 0.0 hi, 1.5 si, 0.0 st MiB Mem : 3794.4 total, 467.5 free, 1214.3 used, 2112.5 buff/cache MiB Swap: 100.0 total, 95.2 free, 4.8 used. 2503.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * pivccu-dkms.service loaded failed failed piVCCU DKMS Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 7.3G 49G 13% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jul 31 21:04:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:5A:83:48 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=2a0531f8-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jul 31 21:04:31 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Wed Jul 31 21:04:31 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): 5 orphan inodes deleted [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): recovery complete [Wed Jul 31 21:04:32 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Wed Jul 31 21:04:32 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Jul 31 21:04:33 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: du: cannot access '/var/lib/lxcfs/cgroup': Input/output error 3.7G /var/ 2.1G /var/log/journal/664a8e581ec84405863df59a10cf9293 2.1G /var/log/journal 2.1G /var/log 817M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 289M /opt/iobroker/iobroker-data/ 223M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 49M /opt/iobroker/iobroker-data/backup-objects 48M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 13M /opt/iobroker/iobroker-data/objects.jsonl 8.8M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.18.0-1nodesource1 Version table: *** 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 7.0.22 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 7483 States: 5874 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://apt.pivccu.de/piVCCU stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 58165914 2710235/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 58154890 2703367/sshd: /usr/ tcp 0 0 192.168.178.46:1883 0.0.0.0:* LISTEN 1001 58165795 2710044/io.sonoff.0 tcp 0 0 192.168.178.46:2010 0.0.0.0:* LISTEN 1001 58169080 2711660/io.hm-rpc.1 tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 12078 1002/dnsmasq tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 58165557 2709771/iobroker.js tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 58165562 2709771/iobroker.js tcp6 0 0 :::22 :::* LISTEN 0 58154892 2703367/sshd: /usr/ tcp6 0 0 :::8082 :::* LISTEN 1001 58163825 2710216/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 58163169 2709798/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 58166661 2710413/io.terminal udp 0 0 0.0.0.0:40873 0.0.0.0:* 108 58158484 2704192/avahi-daemo udp 0 0 10.0.3.1:53 0.0.0.0:* 0 12077 1002/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 12074 1002/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12788 818/dhclient udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 58164896 2710024/io.mihome-v udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 58163791 2710178/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 58163792 2710178/io.tuya.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 58165133 2710082/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 58158482 2704192/avahi-daemo udp6 0 0 :::37109 :::* 108 58158485 2704192/avahi-daemo udp6 0 0 :::5353 :::* 108 58158483 2704192/avahi-daemo *** Log File - Last 25 Lines *** 2024-10-08 20:29:00.150 - info: hm-rpc.0 (2711496) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:00.528 - info: hm-rpc.0 (2711496) xmlrpc server is trying to listen on 192.168.178.46:2001 2024-10-08 20:29:00.530 - info: hm-rpc.0 (2711496) xmlrpc client is trying to connect to 192.168.178.47:2001/ with ["http://192.168.178.46:2001","IoBroker:hm-rpc.0:9ad5b2ff275462b51f6c8398ac38d247"] 2024-10-08 20:29:01.222 - error: hm-rega.0 (2709942) CCU 192.168.178.47 unreachable 2024-10-08 20:29:01.236 - error: hm-rpc.0 (2711496) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2001 2024-10-08 20:29:03.134 - info: netatmo-crawler.0 (2711519) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:03.224 - info: netatmo-crawler.0 (2711519) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 20:29:04.358 - info: netatmo-crawler.0 (2711519) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 20:29:04.909 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-08 20:29:18.018 - info: host.IoBroker instance system.adapter.hm-rpc.1 started with pid 2711660 2024-10-08 20:29:20.587 - info: hm-rpc.1 (2711660) starting. Version 1.16.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:20.822 - info: hm-rpc.1 (2711660) xmlrpc server is trying to listen on 192.168.178.46:2010 2024-10-08 20:29:20.824 - info: hm-rpc.1 (2711660) xmlrpc client is trying to connect to 192.168.178.47:2010/ with ["http://192.168.178.46:2010","IoBroker:hm-rpc.1:cad2942d81e0f42acf3bc327e357494b"] 2024-10-08 20:29:23.907 - error: hm-rpc.1 (2711660) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2010 2024-10-08 20:29:30.101 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 started with pid 2712236 2024-10-08 20:29:31.242 - info: hm-rpc.0 (2711496) xmlrpc -> 192.168.178.47:2001/ init ["http://192.168.178.46:2001",""] 2024-10-08 20:29:32.258 - info: hm-rpc.0 (2711496) terminating 2024-10-08 20:29:32.260 - info: hm-rpc.0 (2711496) Terminated (NO_ERROR): Without reason 2024-10-08 20:29:32.869 - info: host.IoBroker instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR) 2024-10-08 20:29:32.870 - info: host.IoBroker Restart adapter system.adapter.hm-rpc.0 because enabled 2024-10-08 20:29:33.296 - info: netatmo-crawler.0 (2712236) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 4.0.23 2024-10-08 20:29:33.388 - info: netatmo-crawler.0 (2712236) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 20:29:33.630 - error: hm-rega.0 (2709942) CCU 192.168.178.47 unreachable 2024-10-08 20:29:34.686 - info: netatmo-crawler.0 (2712236) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 20:29:35.245 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
This system needs to be REBOOTED!
-
@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
This system needs to be REBOOTED!
@thomas-braun iobroker restart?
-
@thomas-braun iobroker restart?
-
Das komplette System. Offenbar war da ein Kernel-Update dabei, weswegen da jetzt per dkms z.B. der pivccu neugebaut werden muss.
-
Das komplette System. Offenbar war da ein Kernel-Update dabei, weswegen da jetzt per dkms z.B. der pivccu neugebaut werden muss.
-
@thomas-braun heißt jetzt für Dummies? Sorry aber bin mit den Befehlen noch nicht ganz fit
-
@thomas-braun danke für deinen support, jetzt erscheint folgendes im Terminal:
fabio@IoBroker:/home/pi $ iob stop fabio@IoBroker:/home/pi $ sudo reboot [sudo] password for fabio: Connection to 192.168.178.46 closed by remote host. Connection to 192.168.178.46 closed. PS C:\Users\mulla> ssh pi@192.168.178.46 pi@192.168.178.46's password: Linux IoBroker 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Oct 8 20:04:34 2024 from 192.168.178.131 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@IoBroker:~ $ iob update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] pi@IoBroker:~ $ cu fabio -bash: cu: command not found pi@IoBroker:~ $ ssh fabio@192.168.178.46 The authenticity of host '192.168.178.46 (192.168.178.46)' can't be established. ECDSA key fingerprint is SHA256:FIhsIFzSsCA3qcV8rP3HPxSWGbgQ71sBXmHraXwu1t0. Are you sure you want to continue connecting (yes/no/[fingerprint])? n Please type 'yes', 'no' or the fingerprint: no Host key verification failed. pi@IoBroker:~ $ su fabio Password: fabio@IoBroker:/home/pi $ iob update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] fabio@IoBroker:/home/pi $ iob upgrade all -y Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Update hm-rega from @4.0.0 to @5.0.0 NPM version: 10.8.2 Installing iobroker.hm-rega@5.0.0... (System call) added 2 packages, removed 399 packages, and changed 2 packages in 16s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.hm-rega.0" upload [13] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/homematic.png homematic.png image/png upload [12] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [11] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [10] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [9] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [8] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [7] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [6] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [5] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [4] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [3] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [2] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/index.html index.html text/html upload [1] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/index_m.html index_m.html text/html upload [0] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/words.js words.js application/javascript Update discovery from @4.5.0 to @5.0.0 NPM version: 10.8.2 Installing iobroker.discovery@5.0.0... (System call) changed 1 package in 11s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.discovery.0" upload [6] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/discovery.png discovery.png image/png upload [5] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index.html index.html text/html upload [4] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index_m.html index_m.html text/html upload [3] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings.html settings.html text/html upload [2] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings_m.html settings_m.html text/html upload [1] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/translateTools.js translateTools.js application/javascript upload [0] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/words.js words.js application/javascript Update admin from @7.0.22 to @7.1.5 host.IoBroker Adapter "system.adapter.admin.0" is stopped. NPM version: 10.8.2 Installing iobroker.admin@7.1.5... (System call) added 11 packages, removed 3 packages, and changed 11 packages in 21s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.admin.0" upload [68] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png upload [60] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/i18n/it.json custom/i18n/it.json application/json upload [50] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/node_modules_iobroker_adapter-react-v5_assets_devices_sync_recursive_-node_modules_iobroker_a-de23730.1d6892ae.chunk.js custom/static/js/node_modules_iobroker_adapter-react-v5_assets_devices_sync_recursive_-node_modules_iobroker_a-de23730.1d6892ae.chunk.js application/javascript upload [40] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/src_bootstrap_jsx.aca93d2e.chunk.js custom/static/js/src_bootstrap_jsx.aca93d2e.chunk.js application/javascript upload [30] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_FilledInput_FilledInput_js.9c980ca7.chunk.js custom/static/js/vendors-node_modules_mui_material_FilledInput_FilledInput_js.9c980ca7.chunk.js application/javascript upload [20] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js application/javascript upload [19] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js.map custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js.map application/json upload [18] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js application/javascript upload [17] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js.map custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js.map application/json upload [16] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js application/javascript upload [15] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js.map custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js.map application/json upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js application/javascript upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js.map custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js.map application/json upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/uk/translations.json i18n/uk/translations.json application/json upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json5 jsonConfig.json5 application/json5 host.IoBroker Adapter "system.adapter.admin.0" is started Update zigbee from @1.8.10 to @1.10.3 host.IoBroker Adapter "system.adapter.zigbee.0" is stopped. NPM version: 10.8.2 Installing iobroker.zigbee@1.10.3... (System call) added 18 packages, removed 19 packages, and changed 24 packages in 33s 120 packages are looking for funding run `npm fund` for details Update "system.adapter.zigbee.0" upload [331] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/adapter-settings.js adapter-settings.js application/javascript upload [300] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/E2213.png img/E2213.png image/png upload [250] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/cc2538_router_v1.png img/cc2538_router_v1.png image/png upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hue-smart-button.png img/hue-smart-button.png image/png upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_lamp.png img/lifecontrol_lamp.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_fuzo_outdoor_wall_light.png img/philips_fuzo_outdoor_wall_light.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_argenta_4.png img/philips_hue_argenta_4.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_gu10_ambiance.png img/philips_hue_gu10_ambiance.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lwv001.png img/philips_hue_lwv001.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/previous_track.png img/previous_track.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/sensor_philipshue.png img/sensor_philipshue.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/smartthings_motion.png img/smartthings_motion.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ts0203.png img/ts0203.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_tyzs1l.png img/tuya_tyzs1l.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unavailable.png img/unavailable.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unknown.png img/unknown.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/wemo.png img/wemo.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_plug_eu.png img/xiaomi_plug_eu.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_wireless_switch.png img/xiaomi_wireless_switch.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27.png img/zbt_e27.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27_rgbw.png img/zbt_e27_rgbw.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_led_panel.png img/zbt_led_panel.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_smart_switch.png img/zbt_smart_switch.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zemismart_sw2.png img/zemismart_sw2.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index.html index.html text/html upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/moment.min.js moment.min.js application/javascript upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/shuffle.min.js shuffle.min.js application/javascript upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/tab_m.html tab_m.html text/html upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.css vis-network.min.css text/css upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.js vis-network.min.js application/javascript upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/words.js words.js application/javascript upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.png zigbee.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.svg zigbee.svg image/svg+xml host.IoBroker Adapter "system.adapter.zigbee.0" is started Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 fabio@IoBroker:/home/pi $ -
@thomas-braun danke für deinen support, jetzt erscheint folgendes im Terminal:
fabio@IoBroker:/home/pi $ iob stop fabio@IoBroker:/home/pi $ sudo reboot [sudo] password for fabio: Connection to 192.168.178.46 closed by remote host. Connection to 192.168.178.46 closed. PS C:\Users\mulla> ssh pi@192.168.178.46 pi@192.168.178.46's password: Linux IoBroker 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Oct 8 20:04:34 2024 from 192.168.178.131 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@IoBroker:~ $ iob update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] pi@IoBroker:~ $ cu fabio -bash: cu: command not found pi@IoBroker:~ $ ssh fabio@192.168.178.46 The authenticity of host '192.168.178.46 (192.168.178.46)' can't be established. ECDSA key fingerprint is SHA256:FIhsIFzSsCA3qcV8rP3HPxSWGbgQ71sBXmHraXwu1t0. Are you sure you want to continue connecting (yes/no/[fingerprint])? n Please type 'yes', 'no' or the fingerprint: no Host key verification failed. pi@IoBroker:~ $ su fabio Password: fabio@IoBroker:/home/pi $ iob update Used repository: stable Adapter "admin" : 7.1.5 , installed 7.0.22 [Updatable] Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 2.10.11 [Updatable] Adapter "daikin-cloud" : 0.4.8 , installed 0.3.0 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 4.5.0 [Updatable] Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.1 , installed 1.3.0 [Updatable] Adapter "ical" : 1.15.0 , installed 1.14.3 [Updatable] Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 3.8.6 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 1.6.3 [Updatable] Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.0.3 [Updatable] Adapter "tankerkoenig" : 3.4.0 , installed 3.1.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.2.0 [Updatable] Adapter "tuya" : 3.16.0 , installed 3.15.0 [Updatable] Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.2.3 [Updatable] Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.2.1 [Updatable] Adapter "zigbee" : 1.10.3 , installed 1.8.10 [Updatable] fabio@IoBroker:/home/pi $ iob upgrade all -y Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Update hm-rega from @4.0.0 to @5.0.0 NPM version: 10.8.2 Installing iobroker.hm-rega@5.0.0... (System call) added 2 packages, removed 399 packages, and changed 2 packages in 16s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.hm-rega.0" upload [13] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/homematic.png homematic.png image/png upload [12] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [11] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [10] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [9] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [8] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [7] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [6] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [5] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [4] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [3] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [2] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/index.html index.html text/html upload [1] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/index_m.html index_m.html text/html upload [0] hm-rega.admin /opt/iobroker/node_modules/iobroker.hm-rega/admin/words.js words.js application/javascript Update discovery from @4.5.0 to @5.0.0 NPM version: 10.8.2 Installing iobroker.discovery@5.0.0... (System call) changed 1 package in 11s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.discovery.0" upload [6] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/discovery.png discovery.png image/png upload [5] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index.html index.html text/html upload [4] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/index_m.html index_m.html text/html upload [3] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings.html settings.html text/html upload [2] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/settings_m.html settings_m.html text/html upload [1] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/translateTools.js translateTools.js application/javascript upload [0] discovery.admin /opt/iobroker/node_modules/iobroker.discovery/admin/words.js words.js application/javascript Update admin from @7.0.22 to @7.1.5 host.IoBroker Adapter "system.adapter.admin.0" is stopped. NPM version: 10.8.2 Installing iobroker.admin@7.1.5... (System call) added 11 packages, removed 3 packages, and changed 11 packages in 21s 131 packages are looking for funding run `npm fund` for details Update "system.adapter.admin.0" upload [68] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png upload [60] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/i18n/it.json custom/i18n/it.json application/json upload [50] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/node_modules_iobroker_adapter-react-v5_assets_devices_sync_recursive_-node_modules_iobroker_a-de23730.1d6892ae.chunk.js custom/static/js/node_modules_iobroker_adapter-react-v5_assets_devices_sync_recursive_-node_modules_iobroker_a-de23730.1d6892ae.chunk.js application/javascript upload [40] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/src_bootstrap_jsx.aca93d2e.chunk.js custom/static/js/src_bootstrap_jsx.aca93d2e.chunk.js application/javascript upload [30] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_FilledInput_FilledInput_js.9c980ca7.chunk.js custom/static/js/vendors-node_modules_mui_material_FilledInput_FilledInput_js.9c980ca7.chunk.js application/javascript upload [20] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js application/javascript upload [19] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js.map custom/static/js/vendors-node_modules_react-ace_lib_index_js.55163eef.chunk.js.map application/json upload [18] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js application/javascript upload [17] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js.map custom/static/js/vendors-node_modules_react-color_es_index_js-node_modules_react-icons_lib_index_mjs.94169d3c.chunk.js.map application/json upload [16] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js application/javascript upload [15] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js.map custom/static/js/vendors-node_modules_react-dom_index_js.8a166965.chunk.js.map application/json upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js application/javascript upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js.map custom/static/js/vendors-node_modules_react-dropzone_dist_es_index_js.91b1d9b3.chunk.js.map application/json upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/uk/translations.json i18n/uk/translations.json application/json upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json5 jsonConfig.json5 application/json5 host.IoBroker Adapter "system.adapter.admin.0" is started Update zigbee from @1.8.10 to @1.10.3 host.IoBroker Adapter "system.adapter.zigbee.0" is stopped. NPM version: 10.8.2 Installing iobroker.zigbee@1.10.3... (System call) added 18 packages, removed 19 packages, and changed 24 packages in 33s 120 packages are looking for funding run `npm fund` for details Update "system.adapter.zigbee.0" upload [331] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/adapter-settings.js adapter-settings.js application/javascript upload [300] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/E2213.png img/E2213.png image/png upload [250] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/cc2538_router_v1.png img/cc2538_router_v1.png image/png upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hue-smart-button.png img/hue-smart-button.png image/png upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_lamp.png img/lifecontrol_lamp.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_fuzo_outdoor_wall_light.png img/philips_fuzo_outdoor_wall_light.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_argenta_4.png img/philips_hue_argenta_4.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_gu10_ambiance.png img/philips_hue_gu10_ambiance.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lwv001.png img/philips_hue_lwv001.png image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/previous_track.png img/previous_track.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/sensor_philipshue.png img/sensor_philipshue.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/smartthings_motion.png img/smartthings_motion.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ts0203.png img/ts0203.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/tuya_tyzs1l.png img/tuya_tyzs1l.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unavailable.png img/unavailable.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/unknown.png img/unknown.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/wemo.png img/wemo.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_plug_eu.png img/xiaomi_plug_eu.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/xiaomi_wireless_switch.png img/xiaomi_wireless_switch.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27.png img/zbt_e27.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_e27_rgbw.png img/zbt_e27_rgbw.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_led_panel.png img/zbt_led_panel.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zbt_smart_switch.png img/zbt_smart_switch.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/zemismart_sw2.png img/zemismart_sw2.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index.html index.html text/html upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/moment.min.js moment.min.js application/javascript upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/shuffle.min.js shuffle.min.js application/javascript upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/tab_m.html tab_m.html text/html upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.css vis-network.min.css text/css upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/vis-network.min.js vis-network.min.js application/javascript upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/words.js words.js application/javascript upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.png zigbee.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/zigbee.svg zigbee.svg image/svg+xml host.IoBroker Adapter "system.adapter.zigbee.0" is started Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.0 Cannot check dependencies: Invalid version of "js-controller". Installed "4.0.23", required ">=5.0.19 fabio@IoBroker:/home/pi $@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
fabio@IoBroker:/home/pi
Warum? Stell dich als fabio auch in dessen home und nicht in das home eines anderen users.
pi@IoBroker:~ $ ssh fabio@192.168.178.46
The authenticity of host '192.168.178.46 (192.168.178.46)' can't be established.
ECDSA key fingerprint is SHA256:FIhsIFzSsCA3qcV8rP3HPxSWGbgQ71sBXmHraXwu1t0.
Are you sure you want to continue connecting (yes/no/[fingerprint])? n
Please type 'yes', 'no' or the fingerprint: no
Host key verification failed.
Den Fingerpring für den fabio musst du schon akzeptieren, damit das funktioniert.
Und warum hast du nicht gleich den 'pi' verwendet, wenn es denn doch schon gab?iob stop iob ugrade self iob upgrade all -y -
puh ok :face_with_head_bandage: :)
heisst ssh fabio@192.168.178.46
dann ecdsa key ... mit yesZitat:
Warum? Stell dich als fabio auch in dessen home und nicht in das home eines anderen users. sorry stehe auf dem Schlauch :( muss da sicherlich noch was umstellen bevor ich die drei Befehle eingebe aber begreife es grad nicht -
puh ok :face_with_head_bandage: :)
heisst ssh fabio@192.168.178.46
dann ecdsa key ... mit yesZitat:
Warum? Stell dich als fabio auch in dessen home und nicht in das home eines anderen users. sorry stehe auf dem Schlauch :( muss da sicherlich noch was umstellen bevor ich die drei Befehle eingebe aber begreife es grad nichtJeder user hat auf einem Linux-System ein eigenes home-Verzeichnis, indem die eigenen Dateien abgelegt werden.
-
Jeder user hat auf einem Linux-System ein eigenes home-Verzeichnis, indem die eigenen Dateien abgelegt werden.
-
@thomas-braun so: fabio@IoBroker:~ $?
Ja. Die Tilde repräsentiert das home des users.
558
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge