Zeitplan startet nicht mehr
-
@sms sagte in Zeitplan startet nicht mehr:
@asgothian Hi
Mit der Ressourcenverschwendung gebe ich dir natürlich recht. Die Sekunde steht auch nur drin damit ich sehe ob es auch funktioniert. Im eigentlichen Script stehen 15 Minuten drin.
Wobei, vielleicht ist auch gerade dass das Problem, das die Sekunde zu viel ist ...
Ich werde es mal ausprobieren.Bei 15 Minuten hast du ein anderes Problem. Du hast ggf. einen Zeitversatz zwischen der eingestellten Zeit und dem Zeitpunkt an dem das Skript zum Zuge kommt. Dazu kommt die Problematik des Zeitvergleichs (wenn da mal jemand 12:25 eingetragen hat), sowie die Problematik das ein Vergleich auf "später als ..." der für jeden Durchlauf später als die eingetragene Zeit wahr wird.
Insgesamt solltest du versuchen die System-tools zu benutzen um zu bestimmten Zeiten zu agieren - nicht mit eigenen "Heartbeats" arbeiten. Die multiplizieren sich gerne mal. Das meiste kann man mit geschickten Ansätzen anders abbilden.
A.
-
@homoran Ja, läuft bei allen gerade
Danach nochmal die Diagnose?
-
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
@asgothian sagte in Zeitplan startet nicht mehr:
@sms Unabhängig davon ob das prinzipiell so läuft oder so nicht läuft - das ist Ressourcenverschwendung auf einem Irren Level.
Der korrekte Weg ist:Viel zu kompliziert. Trigger: "Zeitplan aus Zeitzustand".
Der macht genau das alles, was Du manuell getan hast. Nur den Datenpunkt auswählen und fertig.
Stimmt das auch dann wenn in dem Zeitzustand nur eine Uhrzeit, kein Tag drin steht ? Da war ich nicht sicher, deswegen der komplexe weg - das läuft bei mir zu Hause so seit einiger Zeit.
Ansonsten - super
A.
-
@asgothian sagte in Zeitplan startet nicht mehr:
Stimmt das auch dann wenn in dem Zeitzustand nur eine Uhrzeit, kein Tag drin steht ?
Das geht nur mit Datenpunkten im Format
hh:mmoderhh:mm:ss. Also Tage geht generell nicht. -
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
Das geht nur mit Datenpunkten im Format hh:mm oder hh:mm:ss. Also Tage geht generell nicht.
Ist aber vermutlich genau das was der TE braucht
Hatte ich auch nicht auf dem Schirm
-
@sms sagte in Zeitplan startet nicht mehr:
das heißt?
Das heißt, das du dich noch nie um dein Betriebssystem gekümmert hast.
grafana und influxdb-Repo müssen richtig eingerichtet werden:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
Da sind aber auch noch andere kinken drin. Aber eins nach dem anderen.
-
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
Das geht nur mit Datenpunkten im Format hh:mm oder hh:mm:ss
auch wenn der DP nicht vom typ text, sondern number ist?
-
@thomas-braun Ich meine das es erst zwei Wochen her ist als ich das gemacht habe. Auf jeden Fall im August.
-
@codierknecht sagte in Zeitplan startet nicht mehr:
Ist aber vermutlich genau das was der TE braucht
Dann fragt man innerhalb des Triggers den aktuellen Tag ab, ...
@homoran sagte in Zeitplan startet nicht mehr:
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
Das geht nur mit Datenpunkten im Format hh:mm oder hh:mm:ss
auch wenn der DP nicht vom typ text, sondern number ist?
Wie soll das aussehen? Nur
14heißt dann 14 Uhr, oder wie? Das sieht doch nach dem korrekten Format für diesen Trigger aus (also ein string und keine number):
-
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
Wie soll das aussehen? Nur 14 heißt dann 14 Uhr, oder wie?
das hab ich mich auch gefragt
-
@homoran Ja, und wurde doch danach auf string umgestellt damit der Inhalt zum Datentyp passt.
-
@sms sagte in Zeitplan startet nicht mehr:
@thomas-braun Ich meine das es erst zwei Wochen her ist als ich das gemacht habe. Auf jeden Fall im August.
und dann noch 177 offene updates und verkorkste Repos??
Never!!
-
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
wurde doch danach auf string umgestellt
richtig!
soll aber vorher "immer"
mit der alten Einstellung typ=number funktioniert haben. -
@homoran so schaut es jetzt aus:
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Homee Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:17:59 up 8 min, 3 users, load average: 1.45, 1.78, 1.05 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 14:17:59 CEST Universal time: Tue 2024-09-03 12:17:59 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 1.9G 5.3G 1.4M 1.1G 6.3G Swap: 209M 0B 209M Total: 8.4G 1.9G 5.5G Active iob-Instances: 36 7810 M total memory 1796 M used memory 1973 M active memory 663 M inactive memory 5013 M free memory 99 M buffer memory 967 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 14:17:59 up 8 min, 3 users, load average: 1.45, 1.78, 1.05 Tasks: 206 total, 1 running, 205 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7810.0 total, 5011.3 free, 1797.9 used, 1066.7 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 6012.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.3M 780M 1% /run /dev/mmcblk0p2 ext4 117G 19G 93G 17% / tmpfs tmpfs 3.9G 8.0K 3.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 781M 36K 781M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 14:09:20 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B6:0D:F1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f26be412-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Tue Sep 3 14:09:23 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Tue Sep 3 14:09:26 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=5303 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=3725556k,nr_inodes=931389,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=799748k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799744k,nr_inodes=199936,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.2G /var/ 4.1G /var/log 4.0G /var/log/journal/6c7cbef6aa2e4815900727fbf6286f9a 4.0G /var/log/journal 771M /var/lib Archived and active journals take up 3.9G in the file system. /opt/iobroker/backups: 5.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 816M /opt/iobroker/iobroker-data/ 719M /opt/iobroker/iobroker-data/files 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static 408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 25M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D306MB4E-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 7.0.23 javascript: 8.7.6 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 7.0.23 Adapter "alpha-ess" : 2.1.4 , installed 2.1.4 Adapter "backitup" : 3.0.19 , installed 3.0.19 Adapter "coronavirus-statistics": 0.9.0, installed 0.9.0 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ecovacs-deebot": 1.4.15 , installed 1.4.15 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "growatt" : 3.2.4 , installed 3.2.4 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "pegelalarm" : 1.3.3 , installed 1.3.3 Adapter "pollenflug" : 2.0.0 , installed 2.0.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "semp" : 1.4.5 , installed 1.4.5 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.0 , installed 3.1.0 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 13068 States: 13797 *** OS-Repositories and Updates *** W: GPG error: https://repos.influxdata.com/debian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E E: The repository 'https://repos.influxdata.com/debian bookworm InRelease' is not signed. W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: GPG error: http://archive.raspbian.org/raspbian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9165938D90FDDD2E E: The repository 'http://archive.raspbian.org/raspbian bookworm InRelease' is not signed. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5866 754/sshd: /usr/sbin tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 7563 1001/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 6097 1001/iobroker.js-co tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 7071 857/influxd tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 9748 1235/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 9749 1235/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 8658 1363/io.sonoff.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 6963 747/cupsd tcp6 0 0 :::22 :::* LISTEN 0 5868 754/sshd: /usr/sbin tcp6 0 0 :::9765 :::* LISTEN 1001 12331 1770/io.semp.0 tcp6 0 0 ::1:631 :::* LISTEN 0 6962 747/cupsd tcp6 0 0 :::3000 :::* LISTEN 112 7543 1000/grafana tcp6 0 0 :::7777 :::* LISTEN 1001 9042 1829/io.web.0 tcp6 0 0 :::7770 :::* LISTEN 1001 9409 1042/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 9327 857/influxd udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 824 543/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 12334 1770/io.semp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 12333 1770/io.semp.0 udp 0 0 0.0.0.0:47277 0.0.0.0:* 104 826 543/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7355 833/cups-browsed udp6 0 0 :::5353 :::* 104 825 543/avahi-daemon: r udp6 0 0 :::33089 :::* 104 827 543/avahi-daemon: r udp6 0 0 fe80::c6ff:9450:166:546 :::* 0 7065 689/NetworkManager udp6 0 0 fe80::fe25:eded:c85:546 :::* 0 7303 689/NetworkManager *** Log File - Last 25 Lines *** 2024-09-03 14:18:22.844 - debug: homeconnect.0 (1167) event: {"type":"NOTIFY","data":"{\"haId\":\"484020392374002592\",\"items\":[{\"handling\":\"none\",\"key\":\"BSH.Common.Option.ProgramProgress\",\"level\":\"hint\",\"timestamp\":1725365902,\"unit\":\"%\",\"uri\":\"/api/homeappliances/484020392374002592/programs/active/options/BSH.Common.Option.ProgramProgress\",\"value\":61}]}","lastEventId":"484020392374002592","origin":"https://api.home-connect.com"} 2024-09-03 14:18:22.845 - debug: homeconnect.0 (1167) 484020392374002592.programs.active.options.BSH_Common_Option_ProgramProgress:61 2024-09-03 14:18:22.848 - debug: homeconnect.0 (1167) Set event state 2024-09-03 14:18:22.854 - silly: homeconnect.0 (1167) States user redis pmessage homeconnect.0.*/homeconnect.0.484020392374002592.programs.active.options.BSH_Common_Option_ProgramProgress:{"val":61,"ack":true,"ts":1725365902852,"q":0,"from":"system.adapter.homeconnect.0","user":"system.user.admin","lc":1725365902852} 2024-09-03 14:18:22.901 - debug: homeconnect.0 (1167) event: {"type":"NOTIFY","data":"{\"haId\":\"484020392374002592\",\"items\":[{\"handling\":\"none\",\"key\":\"BSH.Common.Option.RemainingProgramTime\",\"level\":\"hint\",\"timestamp\":1725365902,\"unit\":\"seconds\",\"uri\":\"/api/homeappliances/484020392374002592/programs/active/options/BSH.Common.Option.RemainingProgramTime\",\"value\":5220},{\"handling\":\"none\",\"key\":\"BSH.Common.Option.EstimatedTotalProgramTime\",\"level\":\"hint\",\"timestamp\":1725365902,\"unit\":\"seconds\",\"uri\":\"/api/homeappliances/484020392374002592/programs/active/options/BSH.Common.Option.EstimatedTotalProgramTime\",\"value\":5220}]}","lastEventId":"484020392374002592","origin":"https://api.home-connect.com"} 2024-09-03 14:18:22.901 - debug: homeconnect.0 (1167) 484020392374002592.programs.active.options.BSH_Common_Option_RemainingProgramTime:5220 2024-09-03 14:18:22.902 - debug: homeconnect.0 (1167) 484020392374002592.programs.active.options.BSH_Common_Option_EstimatedTotalProgramTime:5220 2024-09-03 14:18:22.905 - debug: homeconnect.0 (1167) Set event state 2024-09-03 14:18:22.906 - debug: homeconnect.0 (1167) Set event state 2024-09-03 14:18:22.954 - silly: homeconnect.0 (1167) States user redis pmessage homeconnect.0.*/homeconnect.0.484020392374002592.programs.active.options.BSH_Common_Option_RemainingProgramTime:{"val":5220,"ack":true,"ts":1725365902952,"q":0,"from":"system.adapter.homeconnect.0","user":"system.user.admin","lc":1725365902952} 2024-09-03 14:18:22.958 - silly: homeconnect.0 (1167) States user redis pmessage homeconnect.0.*/homeconnect.0.484020392374002592.programs.active.options.BSH_Common_Option_EstimatedTotalProgramTime:{"val":5220,"ack":true,"ts":1725365902956,"q":0,"from":"system.adapter.homeconnect.0","user":"system.user.admin","lc":1725365902956} 2024-09-03 14:18:23.848 - debug: mqtt.0 (1235) Client [Wemos_.81_0] received publish package {"cmd":"publish","retain":false,"qos":0,"dup":false,"length":55,"topic":"Wemos .81/Füllstand Brunnen/Füllstand Brunnen","payload":{"type":"Buffer","data":[50,49,56,46,52,54]}} 2024-09-03 14:18:23.849 - debug: mqtt.0 (1235) Server received "Wemos .81/Füllstand Brunnen/Füllstand Brunnen" (number): 218.46 2024-09-03 14:18:23.860 - silly: mqtt.0 (1235) States user redis pmessage mqtt.0.*/mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen:{"val":218.46,"ack":true,"ts":1725365903855,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365903855} 2024-09-03 14:18:23.866 - debug: mqtt.0 (1235) stateChange mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen: {"val":218.46,"ack":true,"ts":1725365903855,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365903855} 2024-09-03 14:18:23.866 - debug: mqtt.0 (1235) onStateChange mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen: {"val":218.46,"ack":true,"ts":1725365903855,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365903855} 2024-09-03 14:18:23.870 - debug: mqtt.0 (1235) Client [Wemos_.81_0] send to this client "Wemos .81/Füllstand Brunnen/Füllstand Brunnen": 218.46 2024-09-03 14:18:31.587 - info: smartmeter.0 (1352) Received 10 values, 3 updated 2024-09-03 14:18:33.846 - debug: mqtt.0 (1235) Client [Wemos_.81_0] pingreq 2024-09-03 14:18:38.829 - debug: mqtt.0 (1235) Client [Wemos_.81_0] received publish package {"cmd":"publish","retain":false,"qos":0,"dup":false,"length":54,"topic":"Wemos .81/Füllstand Brunnen/Füllstand Brunnen","payload":{"type":"Buffer","data":[50,53,46,56,50]}} 2024-09-03 14:18:38.830 - debug: mqtt.0 (1235) Server received "Wemos .81/Füllstand Brunnen/Füllstand Brunnen" (number): 25.82 2024-09-03 14:18:38.865 - silly: mqtt.0 (1235) States user redis pmessage mqtt.0.*/mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen:{"val":25.82,"ack":true,"ts":1725365918856,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365918856} 2024-09-03 14:18:38.873 - debug: mqtt.0 (1235) stateChange mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen: {"val":25.82,"ack":true,"ts":1725365918856,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365918856} 2024-09-03 14:18:38.879 - debug: mqtt.0 (1235) onStateChange mqtt.0.Wemos_.81.Füllstand_Brunnen.Füllstand_Brunnen: {"val":25.82,"ack":true,"ts":1725365918856,"q":0,"from":"system.adapter.mqtt.0","user":"system.user.admin","lc":1725365918856} 2024-09-03 14:18:38.882 - debug: mqtt.0 (1235) Client [Wemos_.81_0] send to this client "Wemos .81/Füllstand Brunnen/Füllstand Brunnen": 25.82 ============ Mark until here for C&P ============= iob diag has finished. -
@homoran sagte in Zeitplan startet nicht mehr:
soll aber vorher "immer" mit der alten Einstellung typ=number funktioniert haben.
Naja der js-controller ist da ja (noch) recht tolerant und erlaubt auch andere Datentypen zu schreiben. Generiert halt eine Warning.
-
@haus-automatisierung sagte in Zeitplan startet nicht mehr:
Naja der js-controller ist da ja (noch) recht tolerant
Danke!
Da hatte ich u.a. das Problem vermutet, dass das (schon) nicht mehr der Fall ist. -
@homoran Kurzversion:
Copy text starting here: ======================= SUMMARY ======================= v.2024-05-22 Static hostname: Homee Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 20.17.0 and npm 10.8.2 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 2.3G 4.8G 1.4M 1.1G 5.9G Swap: 209M 0B 209M Total: 8.4G 2.3G 5.0G Active iob-Instances: 36 Upgrade policy: none ioBroker Core: js-controller 6.0.11 admin 7.0.23 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin Objects: 13068 States: 13797 Size of iob-Database: 25M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying === -
@sms sagte in Zeitplan startet nicht mehr:
so schaut es jetzt aus:
und bei den slaves?
bitte einzeln! einer nach dem anderen -
@homoran Kellerkind:
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Kellerkind Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:28:49 up 15 min, 4 users, load average: 0.15, 0.14, 0.13 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 13:28:50 BST Universal time: Tue 2024-09-03 12:28:50 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 518M 2.8G 17M 745M 3.5G Swap: 209M 0B 209M Total: 4.2G 518M 3.0G Active iob-Instances: 36 3792 M total memory 494 M used memory 646 M active memory 347 M inactive memory 2673 M free memory 41 M buffer memory 669 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 13:28:50 up 15 min, 4 users, load average: 0.30, 0.17, 0.14 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 83.3 id, 16.7 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 2673.3 free, 495.4 used, 711.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3296.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/mmcblk0p2 ext4 58G 6.1G 49G 11% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 13:13:49 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:59:95:2E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e6691f19-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Tue Sep 3 13:13:52 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Tue Sep 3 13:13:54 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2583 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1668348k,nr_inodes=417087,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000 | |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 795M /var/ 207M /var/log 206M /var/log/journal/29e1cae54c5f42aba99c823242ab5946 206M /var/log/journal 198M /var/lib Archived and active journals take up 205.8M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 15M /opt/iobroker/iobroker-data/files 15M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map 384K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.17.14 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.17.14 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.11.0 [Updatable] Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 2.0.0 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6789 789/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 9225 773/cupsd tcp6 0 0 :::22 :::* LISTEN 0 6791 789/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 9224 773/cupsd udp 0 0 0.0.0.0:43551 0.0.0.0:* 104 3026 582/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7037 1085/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3024 582/avahi-daemon: r udp6 0 0 fe80::59f1:774b:474:546 :::* 0 7101 704/NetworkManager udp6 0 0 fe80::e7c:a388:984::546 :::* 0 8434 704/NetworkManager udp6 0 0 :::41969 :::* 104 3027 582/avahi-daemon: r udp6 0 0 :::5353 :::* 104 3025 582/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-09-03 13:25:22.644 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:25:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:25:23.524 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:25:23.527 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:25:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:26:22.642 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:26:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:26:23.525 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:26:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:26:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:27:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:27:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:27:23.523 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:27:23.525 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:27:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:28:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:28:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:28:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:28:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:28:23.530 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:29:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:29:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:29:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:29:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:29:23.530 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' ============ Mark until here for C&P ============= iob diag has finished. -
@homoran PapaHuette:
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: PapaHuette Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:28:47 up 18 min, 1 user, load average: 0.34, 0.11, 0.05 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 14:28:48 CEST Universal time: Tue 2024-09-03 12:28:48 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 291M 7.3G 0.0K 225M 7.4G Swap: 99M 0B 99M Total: 7.9G 291M 7.4G Active iob-Instances: 36 7812 M total memory 291 M used memory 354 M active memory 68 M inactive memory 7294 M free memory 32 M buffer memory 193 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:28:48 up 18 min, 1 user, load average: 0.34, 0.11, 0.05 Tasks: 159 total, 1 running, 158 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.5 us, 1.5 sy, 0.0 ni, 97.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7812.3 total, 7294.9 free, 291.2 used, 226.3 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 7408.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 4.0G 9.6G 30% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 832K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 14:10:20 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:9D:54 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a622e112-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Sep 3 14:10:21 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Sep 3 14:10:21 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Sep 3 14:10:23 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=3735680k,nr_inodes=933920,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=1599964k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799980k,nr_inodes=199995,mode=700,uid=1000,gid=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.8G /var/ 1.2G /var/log/journal/a72fb28f007b470eaff3aacdf7e11b84 1.2G /var/log/journal 1.2G /var/log 287M /var/cache Archived and active journals take up 1.1G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4M /opt/iobroker/iobroker-data/ 1.1M /opt/iobroker/iobroker-data/files 472K /opt/iobroker/iobroker-data/files/discovery.admin 384K /opt/iobroker/iobroker-data/files/backitup.admin 252K /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 200K /opt/iobroker/iobroker-data/files/discovery.admin/words.js 148K /opt/iobroker/iobroker-data/files/backitup.admin/words.js 136K /opt/iobroker/iobroker-data/objects.jsonl 120K /opt/iobroker/iobroker-data/files/discovery.admin/index_m.html 108K /opt/iobroker/iobroker-data/files/discovery.admin/index.html USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.13.16 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.8.1 [Updatable] Adapter "discovery" : 4.5.0 , installed 3.1.0 [Updatable] Adapter "ds18b20" : 2.0.5 , installed 2.0.4 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "systeminfo" : 1.2.0 , installed 1.1.0 [Updatable] Adapter "worx" : 3.0.2 , installed 2.3.2 [Updatable] Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12683 534/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 12685 534/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14244 720/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1611 399/avahi-daemon: r udp 0 0 0.0.0.0:38158 0.0.0.0:* 108 1613 399/avahi-daemon: r udp6 0 0 :::546 :::* 0 1795 720/dhcpcd udp6 0 0 :::50365 :::* 108 1614 399/avahi-daemon: r udp6 0 0 :::5353 :::* 108 1612 399/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-09-03 14:11:23.659 - warn: systeminfo.3 (1008) Error TypeError: Cannot read properties of null (reading 'toString') in doPoll for System.Led_Red 2024-09-03 14:11:24.159 - info: host.PapaHuette instance system.adapter.worx.2 in version "2.3.2" started with pid 1028 2024-09-03 14:11:24.343 - warn: systeminfo.3 (1008) Error TypeError: Cannot read properties of null (reading 'toString') in doPoll for HP_Photosmart_7520.[name/value] 2024-09-03 14:11:27.814 - warn: systeminfo.3 (1008) Unhandled error in main: TypeError: Cannot read private member #objects from an object whose class did not declare it 2024-09-03 14:11:27.873 - info: worx.2 (1028) starting. Version 2.3.2 in /opt/iobroker/node_modules/iobroker.worx, node: v20.17.0, js-controller: 6.0.11 2024-09-03 14:11:27.899 - info: worx.2 (1028) Login to worx 2024-09-03 14:11:29.095 - info: worx.2 (1028) Connected to worx server 2024-09-03 14:11:29.275 - info: worx.2 (1028) Found 1 devices 2024-09-03 14:11:29.276 - info: worx.2 (1028) Found device EVA with id 2019A0000005000140DB 2024-09-03 14:11:29.515 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.wifiQuality 2024-09-03 14:11:29.591 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryState 2024-09-03 14:11:29.604 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryTemperature 2024-09-03 14:11:29.619 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryVoltage 2024-09-03 14:11:29.656 - info: worx.2 (1028) Multi-ZoneKeeper found! Create State : zoneKeeper 2024-09-03 14:11:30.014 - info: worx.2 (1028) DoubleShedule found, create states... 2024-09-03 14:11:30.131 - info: worx.2 (1028) OneTimeShedule found, create states... 2024-09-03 14:11:30.140 - info: worx.2 (1028) Firmware found, create states... 2024-09-03 14:11:30.432 - info: worx.2 (1028) Create folder activityLog and set states. 2024-09-03 14:11:30.711 - info: worx.2 (1028) Create product folder and states for WR141E 2024-09-03 14:11:31.412 - info: worx.2 (1028) Torque control found, create states... 2024-09-03 14:11:31.461 - info: worx.2 (1028) Autolock found! Create State : AutoLock 2024-09-03 14:11:31.507 - info: worx.2 (1028) Autolock found! Create State : AutoLockTimer 2024-09-03 14:11:31.655 - info: worx.2 (1028) Start MQTT connection 2024-09-03 14:11:32.140 - info: worx.2 (1028) MQTT connected to: iot.eu-west-1.worxlandroid.com 2024-09-03 14:11:32.221 - info: worx.2 (1028) Request Counter: 1 ============ Mark until here for C&P ============= iob diag has finished.
