Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]

Krissie777

@marc-berg
pi@raspberrypi:~ $ ebusctl i
version: ebusd 23.3.23.3
update check: OK, broadcast.csv: different version available
device: 192.178.168.70:5002, TCP
signal: acquired
symbol rate: 140
max symbol rate: 200
min arbitration micros: 3
max arbitration micros: 59
min symbol latency: 20
max symbol latency: 43
scan: finished
reconnects: 0
masters: 2
messages: 11
conditional: 0
poll: 0
update: 4
address 30: master #3
address 31: master #8, ebusd
address 36: slave #8, ebusd, scanning
address c7: slave, scanning

Marc Berg

@krissie777

Dann steht die Verbindung ebusd --> Gateway schon mal sauber. Aber

@marc-berg sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

herzlichen Dank fü den Lösungsansatz. Das habe ich jetzt gemacht und er gibt mir wieder den gleichen Ebus Receive data Fehler aus.

bitte immer alles zeigen, um andere Fehler erkennen zu können.

die aktuelle Fehlermeldung vom Adapter fehlt noch.

EDIT: und

ebusctl find

auch mal ausführen.

Krissie777

@marc-berg said in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

ebusctl find

@raspberrypi:~ $ ebusctl find
broadcast datetime = no data stored
broadcast error = no data stored
broadcast ident = no data stored
broadcast ident = no data stored
broadcast signoflife = no data stored
memory eeprom = no data stored
memory ram = no data stored

Krissie777

@marc-berg

Hallo Marc,
anbei die aktuelle Fehlermeldung:

exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8080]
Vielen Dank und LG

Marc Berg

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8080]

Du hast doch aber bei dir

--httpport=8889

eingestellt...

@marc-berg sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Also bei dir 8889 als HTTP Port

Krissie777

@marc-berg
Hallo Marc,
dankeschön.
Ich hatte die ebus config auch schon auf den Port 8080 umgestellt, gleiches Ergebnis:
exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8080]

Grüße Kris

Marc Berg

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

@marc-berg
Hallo Marc,
dankeschön.
Ich hatte die ebus config auch schon auf den Port 8080 umgestellt, gleiches Ergebnis:
exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8080]

Grüße Kris

Vielleicht ist der Port schon belegt. (Übrigens einer der Punkte, die man mit iob diag gesehen hätte.)

Krissie777

@marc-berg said in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

iob diag

======== Start marking the full check here =========

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 13:18:48 up 1 day,  3:43,  2 users,  load average: 1.16, 0.75, 0.59
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
~ Under-voltage detected
~ Arm frequency capped

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred

*** Time and Time Zones ***
               Local time: Fri 2024-08-23 13:18:49 CEST
           Universal time: Fri 2024-08-23 11:18:49 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.6G        658M         61M        1.5G        2.6G
Swap:           99M        7.0M         92M
Total:         3.9G        1.7G        751M

Active iob-Instances:   15

         3837 M total memory
         1647 M used memory
          621 M active memory
         2412 M inactive memory
          658 M free memory
          118 M buffer memory
         1413 M swap cache
           99 M total swap
            7 M used swap
           92 M free swap

*** top - Table Of Processes  ***
top - 13:18:49 up 1 day,  3:43,  2 users,  load average: 1.16, 0.75, 0.59
Tasks: 159 total,   1 running, 158 sleeping,   0 stopped,   0 zombie
%Cpu(s):  1.2 us,  6.1 sy,  0.0 ni, 92.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3837.7 total,    658.6 free,   1647.2 used,   1531.9 buff/cache
MiB Swap:    100.0 total,     92.7 free,      7.3 used.   2561.3 avail Mem

*** FAILED SERVICES ***

  UNIT               LOAD   ACTIVE SUB    DESCRIPTION
* PiEMItMgmt.service loaded failed failed PiEM-It! Mgmt-Modul, respawn
* Webserver.service  loaded failed failed PiEM-It! Webserver-Modul, respawn

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   14G   15G  49% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     1.9G   66M  1.9G   4% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Aug 22 09:35:17 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_b                                                                                                                                      cm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=E4:5F:01:57:C6:34 vc_mem.mem_base=0x3eb00000 vc_mem                                                                                                                                      .mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=d2b297f7-02 rootfstype=ext4 elevator=deadline fsc                                                                                                                                      k.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Aug 22 09:35:19 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Aug 22 09:35:19 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu Aug 22 09:35:20 2024] EXT4-fs (sda2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET                                SOURCE     FSTYPE     OPTIONS
/                                     /dev/sda2  ext4       rw,noatime
|-/dev                                devtmpfs   devtmpfs   rw,relatime,size=1800056k,nr_inodes=84157,mode=755
| |-/dev/shm                          tmpfs      tmpfs      rw,nosuid,nodev
| |-/dev/pts                          devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| `-/dev/mqueue                       mqueue     mqueue     rw,relatime
|-/sys                                sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security              securityfs securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                    tmpfs      tmpfs      ro,nosuid,nodev,noexec,mode=755
| | |-/sys/fs/cgroup/unified          cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate
| | |-/sys/fs/cgroup/systemd          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,xattr,name=systemd
| | |-/sys/fs/cgroup/cpu,cpuacct      cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,cpu,cpuacct
| | |-/sys/fs/cgroup/blkio            cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,blkio
| | |-/sys/fs/cgroup/net_cls,net_prio cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,net_cls,net_prio
| | |-/sys/fs/cgroup/freezer          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,freezer
| | |-/sys/fs/cgroup/devices          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,devices
| | |-/sys/fs/cgroup/perf_event       cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,perf_event
| | |-/sys/fs/cgroup/cpuset           cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,cpuset
| | `-/sys/fs/cgroup/pids             cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,pids
| |-/sys/fs/bpf                       none       bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                 debugfs    debugfs    rw,relatime
| `-/sys/kernel/config                configfs   configfs   rw,relatime
|-/proc                               proc       proc       rw,relatime
| `-/proc/sys/fs/binfmt_misc          systemd-1  autofs     rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,di                                                                                                                                      rect
|-/run                                tmpfs      tmpfs      rw,nosuid,nodev,mode=755
| |-/run/lock                         tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs                   sunrpc     rpc_pipefs rw,relatime
| `-/run/user/1000                    tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=392984k,mode=700,uid=1000,gid                                                                                                                                      =1000
`-/boot                               /dev/sda1  vfat       rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=as                                                                                                                                      cii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.6G    /var/
1.5G    /var/cache/apt
1.5G    /var/cache
1.4G    /var/cache/apt/archives
823M    /var/lib

Archived and active journals take up 63.9M in the file system.

/opt/iobroker/backups:
4.3G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
825M    /opt/iobroker/iobroker-data/
696M    /opt/iobroker/iobroker-data/files
441M    /opt/iobroker/iobroker-data/files/javascript.admin
409M    /opt/iobroker/iobroker-data/files/javascript.admin/static
408M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b756fe6.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Device_GmbH_DvIR-USB_DvIR-USB_000524-if00-port0




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.4
/usr/bin/node           v18.20.4
/usr/bin/npm            10.7.0
/usr/bin/npx            10.7.0
/usr/bin/corepack       0.28.0


nodejs:
  Installed: 18.20.4-1nodesource1
  Candidate: 18.20.4-1nodesource1
  Version table:
 *** 18.20.4-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.20.3-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  6.0.9
admin:          7.0.23
javascript:     8.7.6

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.ebus.0                   : ebus                  : raspberrypi                              -  enabled
  system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
+ system.adapter.hmip.0                   : hmip                  : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
+ system.adapter.wolf-smartset.0          : wolf-smartset         : raspberrypi                              -  enabled
+ system.adapter.ws.0                     : ws                    : raspberrypi                              -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : raspberrypi                              -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │   name   │                           url                           │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│    0    │ 'stable' │    'http://download.iobroker.net/sources-dist.json'     │    false     │
│    1    │  'beta'  │ 'http://download.iobroker.net/sources-dist-latest.json' │    false     │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.5.0    , installed 1.5.0
Adapter    "admin"        : 7.0.23   , installed 7.0.23
Adapter    "backitup"     : 3.0.19   , installed 3.0.19
Adapter    "daswetter"    : 3.1.15   , installed 3.1.15
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "ebus"         : 3.3.4    , installed 3.3.4
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rpc"       : 1.17.0   , installed 1.17.0
Adapter    "hmip"         : 1.23.3   , installed 1.23.3
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 8.7.6    , installed 8.7.6
Controller "js-controller": 6.0.9    , installed 6.0.9
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "solarwetter"  : 1.2.0    , installed 1.2.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "wolf-smartset": 1.2.3    , installed 1.2.3
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        9367
States:         8906

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://repos.influxdata.com/debian stable InRelease
Hit:4 https://repos.influxdata.com/debian buster InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:6 https://repo.ebusd.eu/apt/default/buster buster InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          19485      719/sshd
tcp        0      0 0.0.0.0:8888            0.0.0.0:*               LISTEN      0          967459     26805/ebusd
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      998        17333      698/influxd
tcp        0      0 0.0.0.0:8889            0.0.0.0:*               LISTEN      0          967460     26805/ebusd
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN      0          19744      787/smbd
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       93210      11781/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       92549      11781/iobroker.js-c
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN      0          19745      787/smbd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       339575     2777/io.admin.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       93711      11958/io.ws.0
tcp6       0      0 :::8086                 :::*                    LISTEN      998        22028      698/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          19487      719/sshd
tcp6       0      0 ::1:3350                :::*                    LISTEN      0          18222      718/xrdp-sesman
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       95441      11971/io.simple-api
tcp6       0      0 :::3000                 :::*                    LISTEN      109        20748      696/grafana-server
tcp6       0      0 :::3389                 :::*                    LISTEN      111        20540      757/xrdp
tcp6       0      0 :::445                  :::*                    LISTEN      0          19742      787/smbd
tcp6       0      0 :::139                  :::*                    LISTEN      0          19743      787/smbd
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16697      693/dhcpcd
udp        0      0 192.178.168.255:137     0.0.0.0:*                           0          19612      695/nmbd
udp        0      0 192.178.168.47:137      0.0.0.0:*                           0          19611      695/nmbd
udp        0      0 0.0.0.0:137             0.0.0.0:*                           0          19599      695/nmbd
udp        0      0 192.178.168.255:138     0.0.0.0:*                           0          19614      695/nmbd
udp        0      0 192.178.168.47:138      0.0.0.0:*                           0          19613      695/nmbd
udp        0      0 0.0.0.0:138             0.0.0.0:*                           0          19600      695/nmbd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12744      408/avahi-daemon: r
udp        0      0 0.0.0.0:53558           0.0.0.0:*                           108        12746      408/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          16713      693/dhcpcd
udp6       0      0 :::5353                 :::*                                108        12745      408/avahi-daemon: r
udp6       0      0 :::33559                :::*                                108        12747      408/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-08-23 13:17:37.693  - info: smartmeter.0 (11903) Received 6 values, 2 updated
2024-08-23 13:17:44.699  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:17:51.725  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:17:58.714  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:05.579  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:12.630  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:18.357  - error: ebus.0 (30094) exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8080]
2024-08-23 13:18:19.506  - info: smartmeter.0 (11903) Received 6 values, 2 updated
2024-08-23 13:18:26.482  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:33.583  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:40.670  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:47.541  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:18:54.556  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:01.620  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:08.697  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:15.827  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:22.946  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:29.974  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:37.037  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:45.967  - info: smartmeter.0 (11903) Received 6 values, 2 updated
2024-08-23 13:19:51.206  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:19:58.233  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:20:05.171  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:20:12.268  - info: smartmeter.0 (11903) Received 6 values, 3 updated
2024-08-23 13:20:19.374  - info: smartmeter.0 (11903) Received 6 values, 3 updated

============ Mark until here for C&P =============

Krissie777

@marc-berg
Hallo Marc,
nochmal vielen Dank, was mich stutzig macht dass beim ebus kein Port im Protokoll angezeigt wird...
LG
Kris

Homoran

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Operating System: Raspbian GNU/Linux 10 (buster)

das OS ist tot und wird nicht mehr gepflegt!!

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Under-voltage detected

hat jetzt nichts mit dem aktuellen Thema zu tun, aber das Netzteil ist zu schwach oder/und da hängt zuviel am USB.

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

usr/bin/nodejs v18.20.4

auch ein Wechsel auf node 20 wäre demnächst fällig.

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Enabled adapters with bindings

ebus ist nicht dabei :thinking_face:
edit: der Adapter lauscht ja anscheinend nicht auf einem eigenen Port, das macht der daemon.

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

> tcp        0      0 0.0.0.0:8889            0.0.0.0:*               LISTEN      0          967460     26805/ebusd
> tcp

Marc Berg

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

nochmal vielen Dank, was mich stutzig macht dass beim ebus kein Port im Protokoll angezeigt wird...

Doch, der ebusd hält zwei Ports offen 8888 (Telnet) und 8889 (HTTP), alles wie erwartet. Hast du den ioBroker-Adapter entsprechend konfiguriert? Das konnte ich so noch nicht sehen.

Krissie777

@marc-berg
Hallo Marc, ja das habe ich selber Fehler.
LG
Christian

Krissie777

@marc-berg
Hallo MArc, nach einem zusätzlichen Neustart des RASPI kommt jetzt diese Fehlermeldung:
exception in ebusd_ReceiveData [Error: Parse Error: Expected HTTP/]
Das ist jetzt neu...
LG
Kris

Marc Berg

@krissie777

Bitte nochmal die aktuelle ioBroker Adapter Konfiguration zeigen.

Homoran

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

ja das habe ich

bitte immer alles zeigen!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

Krissie777

@marc-berg

Marc Berg

@krissie777

Das ist genau falsch rum:

@marc-berg sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Also bei dir 8889 als HTTP Port und 8888 ist Standard für den Telnet-Port.

Homoran

@marc-berg sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

Das ist genau falsch rum:

@Krissie777
und genau deswegen immer alles zeigen.

Krissie777

@marc-berg
ok habe ich vertauscht, wieder der Fehler:
exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8889]
Grüße
Kris

Marc Berg

@krissie777 sagte in Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]:

exception in ebusd_ReceiveData [Error: connect ECONNREFUSED 127.0.0.1:8889]

und iob diag gibt jetzt immer noch

> tcp        0      0 0.0.0.0:8889            0.0.0.0:*               LISTEN      0          967460     26805/ebusd

aus?

Community Forum

NEWS

Exception in ebusd_ReceiveData [Error: connect ETIMEDOUT]

Support us

341

32.5k

81.8k

1.3m