iob diag - Skript

Lucky_ESA


pi@iobroker:~ $ vcgencmd mem_oom
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"
pi@iobroker:~ $ ^C
pi@iobroker:~ $ vcgencmd commands
commands="commands, set_logging, bootloader_config, bootloader_version, cache_flush, codec_enabled, get_mem, get_rsts, measure_clock, measure_temp, measure_volts, get_hvs_asserts, get_config, get_throttled, pmicrd, pmicwr, read_ring_osc, version, readmr, otp_dump, pmic_read_adc, power_monitor"
pi@iobroker:~ $

Verwende doch get_throttled.

Gruß//Lucky

Thomas Braun

@lucky_esa

Dann ist 'mem_oom' wohl aus der Firmware für den RPi5 geflogen. Ich hab den Code jetzt aus dem Skript herausgenommen, die Info war eh nicht so wirklich aussagekräftig.
'get_throttled' wird an anderer Stelle natürlich abgefragt.

Thomas Braun

Neuer Diagnosepunkt
'Life Cycle Status'
ist drin. Können bitte User von Dockern und LXCs da mal schauen ob und mit welchen Meldungen da im Langtext und in der Zusammenfassung da sowas erscheint?

(Bitte wie im ersten Eröffungsposting in diesem Thread gezeigt direkt vom github laden).


*** LIFE CYCLE STATUS ***
Your Operating System codenamed 'trixie' is a testing release! Please use it only for testing purposes!

Gleiche Meldung dann in der Summary.

Danke schön!

Shadowhunter23

@thomas-braun

LXCs

Gerne:

*** LIFE CYCLE STATUS ***
Your Operating System is the current Debian stable version 'bookworm'!

Und Summery am Ende:

Your Operating System is the current Debian stable version 'bookworm'!
=================== END OF SUMMARY ====================

Dolomiti

@thomas-braun

LXCs

Weder im Langtext noch in der Zusammenfassung wir etwas angezeigt. Egal ob über iob diag oder dem direktem Skritpaufruf aus deiner Signatur.
js-controller: 6.0.10
admin:7.0.24
npm: 20.16.0

Homoran

@dolomiti sagte in iob diag - Skript:

Egal ob über iob diag oder dem direktem Skritpaufruf aus deiner Signatur.

du sollst ja auch den Testaufruf aus dem ersten Post ausführen, damit das neue Skript nach Testung freigeschaltet werden kann.

Dolomiti

@homoran sagte in iob diag - Skript:

du sollst ja auch den Testaufruf aus dem ersten Post ausführen, damit das neue Skript nach Testung freigeschaltet werden kann.

Dann hätte Thomas evtl. ein Hinweis schreiben sollen, dass man das Skript aus dem ersten Post nehmen soll. Das geht aus der Meldung von vor 5 Stunden nicht hervor.
@Thomas-Braun
Davon abgesehehn kommt bei mir nix im Langtext und folgendes in der Zusammenfassung


Your Operating System is the current Debian stable version 'bookworm'!
=================== END OF SUMMARY ====================

Homoran

@dolomiti sagte in iob diag - Skript:

Davon abgesehehn kommt bei mir nix im Langtext

das soll ja getestet werden.
Müsste im oberen Drittel stehen, und bei dir ebenfalls grün sein

EDIT:
siehe Post von @Meister-Mopper

*** LIFE CYCLE STATUS ***
Your Operating System is the current Debian stable version 'bookworm'!

Meister Mopper

@thomas-braun

Hier das Ergebnis meines Master-LXC (trixie habe ich aber auf keinem lxc laufen).

bash
Skript v.2024-08-18

*** BASE SYSTEM ***
Static hostname: iobroker
      Icon name: computer-container
        Chassis: container ☐
 Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
         Kernel: Linux 6.8.12-1-pve
   Architecture: x86-64
OS is similar to:

model name      : Intel(R) Core(TM) i3-10110U CPU @ 2.10GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
18:04:19 up 10 days,  2:16,  1 user,  load average: 2.02, 1.83, 1.58
CPU threads: 2


*** LIFE CYCLE STATUS ***
Your Operating System is the current Debian stable version 'bookworm'!

*** Time and Time Zones ***
              Local time: Sun 2024-08-18 18:04:19 CEST
          Universal time: Sun 2024-08-18 16:04:19 UTC
                RTC time: n/a
               Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
             NTP service: inactive
         RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
thomas
HOME=/home/thomas
GROUPS=thomas adm dialout sudo systemd-journal redis iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video redis

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:            6.4G        3.2G        3.1G        126K        161M        3.3G
Swap:             0B          0B          0B
Total:          6.4G        3.2G        3.1G

Active iob-Instances:   54

        6144 M total memory
        3022 M used memory
        2280 M active memory
         781 M inactive memory
        2967 M free memory
           0 M buffer memory
         154 M swap cache
           0 M total swap
           0 M used swap
           0 M free swap

*** top - Table Of Processes  ***
top - 18:04:20 up 10 days,  2:16,  1 user,  load average: 2.02, 1.83, 1.58
Tasks:  63 total,   2 running,  61 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   6144.0 total,   2966.1 free,   3023.8 used,    154.2 buff/cache
MiB Swap:      0.0 total,      0.0 free,      0.0 used.   3120.2 avail Mem

*** FAILED SERVICES ***

 UNIT                    LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount    loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System
* sys-kernel-debug.mount  loaded failed failed Kernel Debug File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
3 loaded units listed.

*** FILESYSTEM ***
Filesystem                   Type      Size  Used Avail Use% Mounted on
rpool/data/subvol-100-disk-1 zfs        32G  8.5G   24G  27% /
none                         tmpfs     492K  4.0K  488K   1% /dev
udev                         devtmpfs   16G     0   16G   0% /dev/tty
tmpfs                        tmpfs      16G     0   16G   0% /dev/shm
tmpfs                        tmpfs     6.3G  120K  6.3G   1% /run
tmpfs                        tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                        tmpfs     3.2G     0  3.2G   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                       FSTYPE OPTIONS
/      rpool/data/subvol-100-disk-1 zfs    rw,noatime,xattr,posixacl,casesensitive

Files in neuralgic directories:

/var:
872M    /var/
544M    /var/cache
541M    /var/cache/apt
494M    /var/cache/apt/archives
212M    /var/log

Archived and active journals take up 200.2M in the file system.

/opt/iobroker/backups:
138M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
832M    /opt/iobroker/iobroker-data/
518M    /opt/iobroker/iobroker-data/files
276M    /opt/iobroker/iobroker-data/backup-objects
185M    /opt/iobroker/iobroker-data/files/javascript.admin
169M    /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
16M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
15M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
11M     /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.ce422ec2.js.map
8.4M    /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.1e6546bb.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00



*** NodeJS-Installation ***

/usr/bin/nodejs         v20.16.0
/usr/bin/node           v20.16.0
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2


nodejs:
 Installed: 20.16.0-1nodesource1
 Candidate: 20.16.0-1nodesource1
 Version table:
*** 20.16.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
       100 /var/lib/dpkg/status
    20.15.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.15.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.14.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.13.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.13.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.12.2-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.12.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.12.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.11.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.11.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.10.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.9.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.8.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.8.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.7.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.6.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.6.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.5.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.5.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.4.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.3.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.3.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.2.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.1.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    20.0.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
    18.19.0+dfsg-6~deb12u2 500
       500 http://deb.debian.org/debian bookworm/main amd64 Packages
    18.19.0+dfsg-6~deb12u1 500
       500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: redis

Core adapters versions
js-controller:  6.0.9
admin:          7.0.22
javascript:     8.7.6

nodejs modules from github:     4
+-- iobroker.bluelink@2.3.6 (git+ssh://git@github.com/Newan/ioBroker.bluelink.git#cfdb728c50b2373f05766dba34797a220302d309)
| +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550)
| +-- syno@3.0.0 (git+ssh://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)
+-- iobroker.vaillant@0.4.0 (git+ssh://git@github.com/TA2k/ioBroker.vaillant.git#fcdfef2d5daac95190d5ab2ba2ab5e213f937a41)

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
 system.adapter.alias-manager.0          : alias-manager         : rpizigbee                                -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.backitup.1               : backitup              : rpizigbee                                -  enabled
+ system.adapter.bluelink.0               : bluelink              : iobroker                                 -  enabled
+ system.adapter.chromecast.0             : chromecast            : iobroker                                 -  enabled
 system.adapter.daswetter.0              : daswetter             : rpizigbee                                -  enabled
+ system.adapter.denon.0                  : denon                 : rpizigbee                                -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
 system.adapter.dwd.0                    : dwd                   : rpizigbee                                -  enabled
+ system.adapter.enigma2.0                : enigma2               : rpizigbee                                -  enabled
+ system.adapter.enigma2.1                : enigma2               : rpizigbee                                -  enabled
 system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.harmony.0                : harmony               : iobroker                                 -  enabled
+ system.adapter.heos.0                   : heos                  : rpizigbee                                -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker                                 -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 12010
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 80
+ system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
 system.adapter.ical.1                   : ical                  : iobroker                                 -  enabled
 system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker                                 - disabled
 system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : iobroker                                 - disabled
 system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 - disabled
 system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
 system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 -  enabled
 system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker                                 - disabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.linux-control.0          : linux-control         : rpizigbee                                -  enabled
+ system.adapter.modbus.0                 : modbus                : iobroker                                 -  enabled
+ system.adapter.nut.0                    : nut                   : iobroker                                 -  enabled
+ system.adapter.nut.1                    : nut                   : iobroker                                 -  enabled
+ system.adapter.ocpp.0                   : ocpp                  : rpizigbee                                -  enabled, port: 9220
+ system.adapter.openligadb.0             : openligadb            : iobroker                                 -  enabled
+ system.adapter.pi-hole.0                : pi-hole               : iobroker                                 -  enabled
+ system.adapter.pi-hole.1                : pi-hole               : rpizigbee                                -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : iobroker                                 -  enabled
+ system.adapter.proxmox.0                : proxmox               : iobroker                                 -  enabled, port: 8006
+ system.adapter.rpi2.0                   : rpi2                  : rpizigbee                                -  enabled
+ system.adapter.samsung_tizen.0          : samsung_tizen         : rpizigbee                                -  enabled, port: 8002
+ system.adapter.sayit.0                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.1                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.2                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.3                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.4                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.sayit.5                  : sayit                 : iobroker                                 -  enabled
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : rpizigbee                                -  enabled
+ system.adapter.solax.0                  : solax                 : iobroker                                 -  enabled
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 8883, bind: 0.0.0.0
+ system.adapter.tankerkoenig.0           : tankerkoenig          : rpizigbee                                -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : iobroker                                 -  enabled
+ system.adapter.tuya.0                   : tuya                  : rpizigbee                                -  enabled
+ system.adapter.unifi.0                  : unifi                 : iobroker                                 -  enabled
+ system.adapter.vaillant.0               : vaillant              : rpizigbee                                -  enabled
 system.adapter.vis-bars.0               : vis-bars              : iobroker                                 - disabled
 system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker                                 - disabled
 system.adapter.vis-google-fonts.0       : vis-google-fonts      : iobroker                                 -  enabled
 system.adapter.vis-history.0            : vis-history           : iobroker                                 - disabled
 system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 - disabled
 system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 - disabled
 system.adapter.vis-justgage.0           : vis-justgage          : iobroker                                 - disabled
 system.adapter.vis-map.0                : vis-map               : iobroker                                 -  enabled
 system.adapter.vis-players.0            : vis-players           : iobroker                                 - disabled
 system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 - disabled
 system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yeelight-2.0             : yeelight-2            : rpizigbee                                -  enabled
+ system.adapter.zigbee.0                 : zigbee                : rpizigbee                                -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 12010
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 80
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.ocpp.0                   : ocpp                  : rpizigbee                                -  enabled, port: 9220
+ system.adapter.proxmox.0                : proxmox               : iobroker                                 -  enabled, port: 8006
+ system.adapter.samsung_tizen.0          : samsung_tizen         : rpizigbee                                -  enabled, port: 8002
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 8883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : rpizigbee                                -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00

ioBroker-Repositories
┌─────────┬─────────────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name            │ url                                                     │ auto upgrade │
├─────────┼─────────────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable'        │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ '(beta) latest' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
│ 2       │ 'stable-live'   │ 'http://iobroker.live/repo/sources-dist.json'           │ false        │
│ 3       │ 'latest-live'   │ 'http://iobroker.live/repo/sources-dist-latest.json'    │ false        │
└─────────┴─────────────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.0.22   , installed 7.0.22
Adapter    "backitup"     : 3.0.16   , installed 3.0.16
Adapter    "bluelink"     : 2.3.6    , installed 2.3.6
Adapter    "chromecast"   : 3.4.1    , installed 3.4.1
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daswetter"    : 3.1.15   , installed 3.1.15
Adapter    "denon"        : 1.15.12  , installed 1.15.12
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "enigma2"      : 2.1.1    , installed 2.1.1
Adapter    "feiertage"    : 1.2.0    , installed 1.2.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "harmony"      : 1.4.0    , installed 1.4.0
Adapter    "heos"         : 2.2.1    , installed 2.2.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.17.0
Adapter    "hue"          : 3.11.0   , installed 3.11.0
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.3
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.7.6    , installed 8.7.6
Controller "js-controller": 6.0.9    , installed 6.0.9
Adapter    "modbus"       : 6.2.3    , installed 6.2.3
Adapter    "net-tools"    : 1.0.11   , installed 1.0.11
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "ocpp"         : 0.12.5   , installed 0.12.5
Adapter    "openligadb"   : 1.4.9    , installed 1.4.9
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 2.0.0    , installed 2.0.0
Adapter    "proxmox"      : 2.3.0    , installed 2.3.0
Adapter    "samsung"      : 0.6.0    , installed 0.6.0
Adapter    "samsung_tizen": 1.1.0    , installed 1.1.0
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "scenes"       : 3.2.1    , installed 3.2.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "solax"        : 0.9.9    , installed 0.9.9
Adapter    "sonoff"       : 3.1.0    , installed 3.1.0
Adapter    "spotify-premium": 1.5.0  , installed 1.5.0
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.9.0    , installed 3.9.0
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "traccar"      : 1.1.4    , installed 1.1.4
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "unifi"        : 0.7.0    , installed 0.7.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-map"      : 1.0.5    , installed 1.0.5
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yeelight-2"   : 1.4.0    , installed 1.4.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        23058
States:         24327

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          35104      131/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          32330      1/init
tcp        0      0 0.0.0.0:6379            0.0.0.0:*               LISTEN      110        32536      124/redis-server 0.
tcp        0      0 192.168.178.10:12010    0.0.0.0:*               LISTEN      1001       39136      393/io.hm-rpc.1
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       34416      137/iobroker.js-con
tcp        0      0 0.0.0.0:8883            0.0.0.0:*               LISTEN      1001       67265983   3623001/io.sonoff.0
tcp        0      0 192.168.178.10:2001     0.0.0.0:*               LISTEN      1001       39803      568/io.hm-rpc.0
tcp6       0      0 :::3000                 :::*                    LISTEN      1001       44592      880/io.fullybrowser
tcp6       0      0 :::22                   :::*                    LISTEN      0          35115      131/sshd: /usr/sbin
tcp6       0      0 :::111                  :::*                    LISTEN      0          32332      1/init
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       47625      1034/io.simple-api.
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       9871275    531497/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       34578      156/io.admin.0
tcp6       0      0 :::6556                 :::*                    LISTEN      0          32456      1/init
tcp6       0      0 ::1:6379                :::*                    LISTEN      110        32537      124/redis-server 0.
tcp6       0      0 :::61991                :::*                    LISTEN      1001       39003      268/io.harmony.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       92149192   770498/io.chromecas
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       39004      268/io.harmony.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          32331      1/init
udp6       0      0 :::111                  :::*                                0          32333      1/init

*** Log File - Last 25 Lines ***

2024-08-18 18:00:00.686  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 10: Fenster Konferenzraum:0.LOW_BAT: false
2024-08-18 18:00:00.686  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 11: Fenster Gästezimmer oben:0.LOW_BAT: false
2024-08-18 18:00:00.686  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 12: Fenster Bad oben:0.LOW_BAT: false
2024-08-18 18:00:00.686  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 13: Fenster Fitness:0.LOW_BAT: false
2024-08-18 18:00:00.686  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 14: Fenster Gäste unten:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 15: Postkasten:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 16: Heizung Küche:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 17: Heizung Bad unten:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 18: Heizung Schlafzimmer:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 19: Heizung Wohnzimmer:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 20: Heizung Gästezimmer oben:0.LOW_BAT: false
2024-08-18 18:00:00.687  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 21: Heizung Konferenzraum:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 22: Heizung Bad oben:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 23: Heizung Büro:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 24: Heizung Fitnessraum:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 25: Heizung Gästezimmer unten:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 26: Presence Kueche:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 27: Lichtsensor:0.LOW_BAT: false
2024-08-18 18:00:00.694  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 28: Sensor Bad unten:0.LOW_BAT: false
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 29: Sensor Wohnzimmer:0.LOW_BAT: false
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 30: Außenthermometer:0.LOW_BAT: false
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 31: Wetterstation:0.LOW_BAT: true
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Geräte Nr. 32: Heizung Bad oben 2:0.LOW_BAT: false
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Text: Wetterstation:0.LOW_BAT
2024-08-18 18:00:00.695  - info: javascript.0 (843813) script.js.javascript.Homematic_Akkustaende: Anzahl Geräte: 34 # davon LOWBAT erkannt: 1

Your Operating System is the current Debian stable version 'bookworm'!
=================== END OF SUMMARY ====================

Dolomiti

@Thomas-Braun
OK. In der Langfassung kommt der Text weiter oben.


*** LIFE CYCLE STATUS ***
Your Operating System is the current Debian stable version 'bookworm'!

Bei mir also ok

Thomas Braun

@meister-mopper sagte in iob diag - Skript:

trixie habe ich aber auf keinem lxc laufen).

Trixie ist ja auch eine Ausgabe von meinem System....

Meister Mopper

@thomas-braun sagte in iob diag - Skript:

@meister-mopper sagte in iob diag - Skript:

trixie habe ich aber auf keinem lxc laufen).

Trixie ist ja auch eine Ausgabe von meinem System....

I know, es war nur eine Ergänzung für Mitleser.

Feuersturm

@thomas-braun Hi,
bei mir wird das ausgegeben:


======== Start marking the full check here =========

```bash
Skript v.2024-08-18

*** BASE SYSTEM ***
 Static hostname: ioB-Prod-Testsystem
       Icon name: computer-container
         Chassis: container
  Virtualization: lxc
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 6.5.13-1-pve
    Architecture: x86-64
OS is similar to: debian

model name      : Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 19:30:53 up 15 days,  5:33,  1 user,  load average: 3.39, 2.72, 2.50
CPU threads: 4


*** LIFE CYCLE STATUS ***
Your Operating System 'jammy focal' is an aging Ubuntu LTS release! Please upgrade to the latest LTS release 'noble' in due time!

Das ist das OS auf dem Testsystem

Welcome to Ubuntu 22.04.4 LTS (GNU/Linux 6.5.13-1-pve x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/pro
Last login: Sun Aug 18 19:27:48 2024 from 192.168.178.128
proxmox@ioB-Prod-Testsystem:~$ ^C
proxmox@ioB-Prod-Testsystem:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04.4 LTS
Release:        22.04
Codename:       jammy

Ist die Ausgabe jammy focal von iob diag richtig oder müsste es nur jammy sein?
Laut dieser Liste https://wiki.ubuntu.com/Releases wird jammy noch bis 2027 gepflegt. Prüft iob diag ob es nur eine aktuellere Version gibt oder auf welcher Basis wird die Aussage "is an aging Ubuntu LTS release" generiert?

Thomas Braun

@feuersturm sagte in iob diag - Skript:

Ist die Ausgabe jammy focal von iob diag richtig oder müsste es nur jammy sein?

Das ist die Ausgabe von

lsb_release -sc

Laut dieser Liste https://wiki.ubuntu.com/Releases wird jammy noch bis 2027 gepflegt. Prüft iob diag ob es nur eine aktuellere Version gibt oder auf welcher Basis wird die Aussage "is an aging Ubuntu LTS release" generiert?

Ja, deswegen ja auch die Aussage, dass deine Distribution nicht das aktuelle LTS-Release ist, aber noch unterhalten wird.

Feuersturm

@thomas-braun Der Befehl

proxmox@ioB-Prod-Testsystem:~$ lsb_release -sc
jammy

gibt aber nur jammy aus und nicht jammy focal

Thomas Braun

@feuersturm

Muss ich mal schauen wo das herkommt. Bist bislang der erste bei dem das passiert.

Thomas Braun

@feuersturm sagte in iob diag - Skript:

gibt aber nur jammy aus und nicht jammy focal

Hab es im Code gefixt. Variablen vertauscht...

Feuersturm

@thomas-braun Das sieht besser aus

*** LIFE CYCLE STATUS ***
Your Operating System 'jammy' is an aging Ubuntu LTS release! Please upgrade to                                                                                             
the latest LTS release 'noble' in due time!

Thomas Braun

@feuersturm

In der Summary gleichlautend?
Ich hab da noch einen Knoten drin, scheint mir.

Feuersturm

@thomas-braun Sieht gut aus bei mir:

Skript v.2024-08-18

*** BASE SYSTEM ***
 Static hostname: ioB-Prod-Testsystem
       Icon name: computer-container
         Chassis: container
  Virtualization: lxc
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 6.5.13-1-pve
    Architecture: x86-64
OS is similar to: debian

model name      : Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 21:22:28 up 15 days,  7:24,  1 user,  load average: 1.95, 2.04, 2.25
CPU threads: 4


*** LIFE CYCLE STATUS ***
Your Operating System 'jammy' is an aging Ubuntu LTS release! Please upgrade to the latest LTS release 'noble' in due time!

und Summary

======================= SUMMARY =======================
                        v.2024-08-18


 Static hostname: ioB-Prod-Testsystem
       Icon name: computer-container
         Chassis: container
  Virtualization: lxc
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 6.5.13-1-pve
    Architecture: x86-64

Installation:           lxc
Kernel:                 x86_64
Userland:               64 bit
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1001
Display-Server:         false
Boot Target:            graphical.target

Pending OS-Updates:     0
Pending iob updates:    2

Nodejs-Installation:
/usr/bin/nodejs         v20.16.0
/usr/bin/node           v20.16.0
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.2

Recommended versions are nodejs 20.16.0 and npm 10.8.1
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            8.0G        2.2G        4.8G        0.0K        1.0G        5.8G
Swap:           2.0G        1.1G        976M
Total:           10G        3.3G        5.8G

Active iob-Instances:   31
Upgrade policy: none

ioBroker Core:          js-controller           6.0.10
                        admin                   7.0.23

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioB-Prod-Testsystem                      -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : ioB-Prod-Testsystem                      -  enabled, port: 8082, bind: 192.168.178.105, run as: admin
+ system.adapter.web.1                    : web                   : ioB-Prod-Testsystem                      -  enabled, port: 8089, bind: 0.0.0.0, run as: admin

Objects:                14532
States:                 12032

Size of iob-Database:

27M     /opt/iobroker/iobroker-data/objects.jsonl
17M     /opt/iobroker/iobroker-data/objects.json.migrated
17M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
2.3M    /opt/iobroker/iobroker-data/objects_BACKUP_153020.json
1.2M    /opt/iobroker/iobroker-data/objects_REMOTE_153020.json
19M     /opt/iobroker/iobroker-data/states.jsonl
6.3M    /opt/iobroker/iobroker-data/states.json.migrated
6.3M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken


Your Operating System 'jammy' is an aging Ubuntu LTS release! Please upgrade to the latest LTS release 'noble' in due time!
=================== END OF SUMMARY ====================

NEWS

iob diag - Skript

Support us

930
Online

31.9k
Users

80.2k
Topics

1.3m
Posts

NEWS

iob diag - Skript

Support us

930Online

31.9kUsers

80.2kTopics

1.3mPosts

930
Online

31.9k
Users

80.2k
Topics

1.3m
Posts