Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Visualisierung
  4. [gelöst] VIS-2 Start über Instanzlink nicht möglich

NEWS

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    21
    1
    928

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    9.0k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.4k

[gelöst] VIS-2 Start über Instanzlink nicht möglich

Geplant Angeheftet Gesperrt Verschoben Visualisierung
31 Beiträge 7 Kommentatoren 4.1k Aufrufe 7 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • sigi234S sigi234

    @mcu

    Ja da stimmt was nicht:

    Screenshot (887).png
    Screenshot (888).png

    Ist seit Heute so, gestern ging es noch.
    Ev. hat es was mit den Updatest zu tun?

    Admin:7.0.19
    JS-Controller: 6.0.9
    Node.js: v20.16.0
    NPM: 10.8.1

    arteckA Offline
    arteckA Offline
    arteck
    Developer Most Active
    schrieb am zuletzt editiert von
    #4

    @sigi234 das wird am Admin liegen

    zigbee hab ich, zwave auch, nuc's genauso und HA auch

    M 1 Antwort Letzte Antwort
    1
    • arteckA arteck

      @sigi234 das wird am Admin liegen

      M Online
      M Online
      MCU
      schrieb am zuletzt editiert von
      #5

      @arteck Habe ein Issue eröffnet.
      https://github.com/ioBroker/ioBroker.admin/issues/2570

      NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
      Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

      Bernd1967B 1 Antwort Letzte Antwort
      3
      • M MCU

        @arteck Habe ein Issue eröffnet.
        https://github.com/ioBroker/ioBroker.admin/issues/2570

        Bernd1967B Offline
        Bernd1967B Offline
        Bernd1967
        schrieb am zuletzt editiert von
        #6

        @MCU

        Hatte Gestern auch mal zum testen vis-2 Adapter installiert.
        Hier funktioniert es mit beiden Instanz Link (vis und vis-2)
        Könnte es vielleicht mit HTTPS zusammenhängen ?
        Ich benutzte weiterhin unverschlüsselte Verbindung.
        Oder Browser cache löschen ?
        Fehler in der Konsole ?

        Admin:7.0.19
        JS-Controller: 6.0.9
        Node.js: v20.16.0
        NPM: 10.8.1

        Bernd1967B M 2 Antworten Letzte Antwort
        0
        • Bernd1967B Bernd1967

          @MCU

          Hatte Gestern auch mal zum testen vis-2 Adapter installiert.
          Hier funktioniert es mit beiden Instanz Link (vis und vis-2)
          Könnte es vielleicht mit HTTPS zusammenhängen ?
          Ich benutzte weiterhin unverschlüsselte Verbindung.
          Oder Browser cache löschen ?
          Fehler in der Konsole ?

          Admin:7.0.19
          JS-Controller: 6.0.9
          Node.js: v20.16.0
          NPM: 10.8.1

          Bernd1967B Offline
          Bernd1967B Offline
          Bernd1967
          schrieb am zuletzt editiert von Bernd1967
          #7

          Was mir noch aufgefallen ist das bei mir der vis-2 Adapter die selbe Portnummer hat wie der vis Adapter.
          Bei Euch ist eine ander Portnummer.

          vis Link:
          http://xxx.xxx.xxx:8082/vis/edit.html#DemoView

          vis-2 Link:
          http://xxx.xxx.xxx:8082/vis-2/edit.html#DemoView

          M 1 Antwort Letzte Antwort
          1
          • M MCU

            Ich habe VIS-2 hinzugefügt kann aber die VIS nicht starten über den Instanz-Link.

            ee0c1a1f-aab3-4389-8404-ea7ab189910e-image.png

            Das zugehörige LOG ist sehr kurz, obwohl debug eingeschaltet.

            vis-2.0
            2024-07-26 00:21:10.862	info	vis-2 license is OK.
            
            vis-2.0
            2024-07-26 00:21:10.650	info	starting. Version 2.9.64 in /opt/iobroker/node_modules/iobroker.vis-2, node: v20.16.0, js-controller: 5.0.19
            
            vis-2.0
            2024-07-26 00:21:10.542	debug	Plugin sentry Initialize Plugin (enabled=true)
            

            iob diag

            Skript v.2024-05-22
            
            *** BASE SYSTEM ***
             Static hostname: iobrokerPROD
                   Icon name: computer-container
                     Chassis: container ☐
              Virtualization: lxc
            Operating System: Debian GNU/Linux 12 (bookworm)
                      Kernel: Linux 6.8.8-3-pve
                Architecture: x86-64
            
            model name      : 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
            Docker          : false
            Virtualization  : lxc
            Kernel          : x86_64
            Userland        : 64 bit
            
            Systemuptime and Load:
             00:24:42 up  1:09,  2 users,  load average: 1.35, 1.20, 1.17
            CPU threads: 6
            
            
            *** Time and Time Zones ***
                           Local time: Fri 2024-07-26 00:24:42 CEST
                       Universal time: Thu 2024-07-25 22:24:42 UTC
                             RTC time: n/a
                            Time zone: Europe/Berlin (CEST, +0200)
            System clock synchronized: yes
                          NTP service: inactive
                      RTC in local TZ: no
            
            *** Users and Groups ***
            User that called 'iob diag':
            prox
            HOME=/home/prox
            GROUPS=prox adm sudo iobroker
            
            User that is running 'js-controller':
            iobroker
            HOME=/home/iobroker
            GROUPS=iobroker tty dialout audio video
            
            *** Display-Server-Setup ***
            Display-Server: false
            Desktop:
            Terminal:       tty
            Boot Target:    multi-user.target
            
            *** MEMORY ***
                           total        used        free      shared  buff/cache   available
            Mem:            8.6G        3.2G        4.5G        131K        980M        5.4G
            Swap:           536M          0B        536M
            Total:          9.1G        3.2G        5.0G
            
            Active iob-Instances:   47
            
                     8192 M total memory
                     3005 M used memory
                     3019 M active memory
                      746 M inactive memory
                     4250 M free memory
                        0 M buffer memory
                      935 M swap cache
                      512 M total swap
                        0 M used swap
                      512 M free swap
            
            *** top - Table Of Processes  ***
            top - 00:24:42 up  1:10,  2 users,  load average: 1.32, 1.20, 1.17
            Tasks:  77 total,   1 running,  76 sleeping,   0 stopped,   0 zombie
            %Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
            MiB Mem :   8192.0 total,   4248.8 free,   3007.7 used,    935.7 buff/cache
            MiB Swap:    512.0 total,    512.0 free,      0.0 used.   5184.3 avail Mem
            
            *** FAILED SERVICES ***
            
              UNIT                                 LOAD   ACTIVE SUB    DESCRIPTION
            * run-rpc_pipefs.mount                 loaded failed failed RPC Pipe File System
            * sys-kernel-config.mount              loaded failed failed Kernel Configuration File System
            * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured
            
            LOAD   = Reflects whether the unit definition was properly loaded.
            ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
            SUB    = The low-level unit activation state, values depend on unit type.
            3 loaded units listed.
            
            *** FILESYSTEM ***
            Filesystem                       Type      Size  Used Avail Use% Mounted on
            /dev/mapper/pve-vm--150--disk--0 ext4       30G   15G   14G  52% /
            none                             tmpfs     492K  4.0K  488K   1% /dev
            udev                             devtmpfs   16G     0   16G   0% /dev/tty
            /dev/mapper/pve-root             ext4       94G   29G   61G  33% /mnt/windows
            tmpfs                            tmpfs      16G     0   16G   0% /dev/shm
            tmpfs                            tmpfs     6.2G  124K  6.2G   1% /run
            tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock
            tmpfs                            tmpfs     3.1G     0  3.1G   0% /run/user/1001
            
            Messages concerning ext4 filesystem in dmesg:
            dmesg: read kernel buffer failed: Operation not permitted
            
            Show mounted filesystems:
            TARGET                                                  SOURCE                                  FSTYPE     OPTIONS
            /                                                       /dev/mapper/pve-vm--150--disk--0        ext4       rw,relatime,stripe=16
            |-/run                                                  tmpfs                                   tmpfs      rw,nosuid,nodev,size=6497012k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64
            | |-/run/lock                                           tmpfs                                   tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64
            | |-/run/user/1001                                      tmpfs                                   tmpfs      rw,nosuid,nodev,relatime,size=3248504k,nr_inodes=812126,mode=700,uid=101001,gid=101001,inode64
            | |-/run/credentials/systemd-tmpfiles-setup.service     ramfs                                   ramfs      ro,nosuid,nodev,noexec,relatime,mode=700
            | |-/run/credentials/systemd-sysctl.service             ramfs                                   ramfs      ro,nosuid,nodev,noexec,relatime,mode=700
            | |-/run/credentials/systemd-sysusers.service           ramfs                                   ramfs      ro,nosuid,nodev,noexec,relatime,mode=700
            | `-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs                                   ramfs      ro,nosuid,nodev,noexec,relatime,mode=700
            |-/dev                                                  none                                    tmpfs      rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
            | |-/dev/shm                                            tmpfs                                   tmpfs      rw,nosuid,nodev,uid=100000,gid=100000,inode64
            | |-/dev/mqueue                                         mqueue                                  mqueue     rw,nosuid,nodev,noexec,relatime
            | |-/dev/ttyUSB0                                        udev[/ttyUSB0]                          devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/.lxc/proc                                      proc                                    proc       rw,relatime
            | |-/dev/.lxc/sys                                       sys                                     sysfs      rw,relatime
            | |-/dev/full                                           udev[/full]                             devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/null                                           udev[/null]                             devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/random                                         udev[/random]                           devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/tty                                            udev[/tty]                              devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/urandom                                        udev[/urandom]                          devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/zero                                           udev[/zero]                             devtmpfs   rw,nosuid,relatime,size=16208696k,nr_inodes=4052174,mode=755,inode64
            | |-/dev/pts                                            devpts                                  devpts     rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
            | |-/dev/ptmx                                           devpts[/ptmx]                           devpts     rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
            | |-/dev/console                                        devpts[/0]                              devpts     rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
            | |-/dev/tty1                                           devpts[/1]                              devpts     rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
            | `-/dev/tty2                                           devpts[/2]                              devpts     rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
            |-/proc                                                 proc                                    proc       rw,nosuid,nodev,noexec,relatime
            | |-/proc/sys                                           proc[/sys]                              proc       ro,relatime
            | | |-/proc/sys/net                                     proc[/sys/net]                          proc       rw,nosuid,nodev,noexec,relatime
            | | `-/proc/sys/kernel/random/boot_id                   none[/.lxc-boot-id]                     tmpfs      ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
            | |-/proc/sysrq-trigger                                 proc[/sysrq-trigger]                    proc       ro,relatime
            | |-/proc/cpuinfo                                       lxcfs[/proc/cpuinfo]                    fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/diskstats                                     lxcfs[/proc/diskstats]                  fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/loadavg                                       lxcfs[/proc/loadavg]                    fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/meminfo                                       lxcfs[/proc/meminfo]                    fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/slabinfo                                      lxcfs[/proc/slabinfo]                   fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/stat                                          lxcfs[/proc/stat]                       fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | |-/proc/swaps                                         lxcfs[/proc/swaps]                      fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            | `-/proc/uptime                                        lxcfs[/proc/uptime]                     fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            |-/sys                                                  sysfs                                   sysfs      ro,nosuid,nodev,noexec,relatime
            | |-/sys/fs/fuse/connections                            fusectl                                 fusectl    rw,nosuid,nodev,noexec,relatime
            | |-/sys/devices/virtual/net                            sysfs[/devices/virtual/net]             sysfs      rw,nosuid,nodev,noexec,relatime
            | |-/sys/fs/cgroup                                      none                                    cgroup2    rw,nosuid,nodev,noexec,relatime
            | `-/sys/devices/system/cpu                             lxcfs[/sys/devices/system/cpu]          fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
            |-/mnt/windows                                          /dev/mapper/pve-root[/mnt/pve/windows]  ext4       rw,relatime,errors=remount-ro
            `-/mnt/nas                                              /dev/mapper/pve-root[/mnt/pve/fritznas] ext4       rw,relatime,errors=remount-ro
            
            Files in neuralgic directories:
            
            /var:
            1.5G    /var/
            1.2G    /var/log/journal/69ffeed97a1945f88a51d8df571b2606
            1.2G    /var/log/journal
            1.2G    /var/log
            155M    /var/lib
            
            Archived and active journals take up 1.1G in the file system.
            
            /opt/iobroker/backups:
            451M    /opt/iobroker/backups/
            
            /opt/iobroker/iobroker-data:
            1.3G    /opt/iobroker/iobroker-data/
            926M    /opt/iobroker/iobroker-data/files
            299M    /opt/iobroker/iobroker-data/files/javascript.admin
            265M    /opt/iobroker/iobroker-data/files/javascript.admin/static
            264M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js
            
            The five largest files in iobroker-data are:
            87M     /opt/iobroker/iobroker-data/states.jsonl
            38M     /opt/iobroker/iobroker-data/objects.jsonl
            38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
            35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
            27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
            
            USB-Devices by-id:
            USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':
            
            No Devices found 'by-id'
            
            HINT:
            Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
            /dev/ttyUSB0
            
            
            
            *** NodeJS-Installation ***
            
            /usr/bin/nodejs         v20.16.0
            /usr/bin/node           v20.16.0
            /usr/bin/npm            10.8.1
            /usr/bin/npx            10.8.1
            /usr/bin/corepack       0.28.2
            
            
            nodejs:
              Installed: 20.16.0-1nodesource1
              Candidate: 20.16.0-1nodesource1
              Version table:
             *** 20.16.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                    100 /var/lib/dpkg/status
                 20.15.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.15.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.14.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.13.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.13.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.12.2-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.12.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.12.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.11.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.11.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.10.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.9.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.8.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.8.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.7.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.6.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.6.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.5.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.5.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.4.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.3.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.3.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.2.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.1.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 20.0.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
                 18.19.0+dfsg-6~deb12u2 500
                    500 http://ftp.debian.org/debian bookworm/main amd64 Packages
                 18.19.0+dfsg-6~deb12u1 500
                    500 http://security.debian.org bookworm-security/main amd64 Packages
            
            Temp directories causing npm8 problem: 0
            No problems detected
            
            Errors in npm tree:
            
            *** ioBroker-Installation ***
            
            ioBroker Status
            iobroker is running on this host.
            
            
            Objects type: jsonl
            States  type: jsonl
            
            Core adapters versions
            js-controller:  5.0.19
            admin:          7.0.19
            javascript:     8.6.0
            
            nodejs modules from github:     4
            +-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456)
            +-- iobroker.hue-extended@2.0.1 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.hue-extended.git#f3d1d9187fbc9bcdde5c39c1fbc80371ec7941f2)
            +-- iobroker.jarvis@3.2.0-beta.47 (git+ssh://git@github.com/Zefau/ioBroker.jarvis.git#b2aa6c5e163660c5447353ff595b6d93441915cd)
            +-- iobroker.meross@1.17.0 (git+ssh://git@github.com/Apollon77/ioBroker.meross.git#31fe999d84e17f0c79b2c5243f8227776035c718)
            
            Adapter State
            + system.adapter.admin.0                  : admin                 : iobrokerPROD                             -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.alexa2.0                 : alexa2                : iobrokerPROD                             -  enabled
            + system.adapter.backitup.0               : backitup              : iobrokerPROD                             -  enabled
              system.adapter.birthdays.0              : birthdays             : iobrokerPROD                             - disabled
            + system.adapter.bring.0                  : bring                 : iobrokerPROD                             -  enabled
            + system.adapter.broadlink2.0             : broadlink2            : iobrokerPROD                             -  enabled
            + system.adapter.cameras.0                : cameras               : iobrokerPROD                             -  enabled, port: 8200, bind: 127.0.0.1
            + system.adapter.chromecast.0             : chromecast            : iobrokerPROD                             -  enabled
            + system.adapter.cloud.0                  : cloud                 : iobrokerPROD                             -  enabled
              system.adapter.daswetter.0              : daswetter             : iobrokerPROD                             -  enabled
              system.adapter.devices.0                : devices               : iobrokerPROD                             -  enabled
            + system.adapter.discovery.0              : discovery             : iobrokerPROD                             -  enabled
              system.adapter.dwd.0                    : dwd                   : iobrokerPROD                             - disabled
            + system.adapter.echarts.0                : echarts               : iobrokerPROD                             -  enabled
            + system.adapter.email.0                  : email                 : iobrokerPROD                             -  enabled
            + system.adapter.fahrplan.0               : fahrplan              : iobrokerPROD                             -  enabled
              system.adapter.flot.0                   : flot                  : iobrokerPROD                             -  enabled
            + system.adapter.fritzdect.0              : fritzdect             : iobrokerPROD                             -  enabled
            + system.adapter.fullybrowser.0           : fullybrowser          : iobrokerPROD                             -  enabled
            + system.adapter.history.0                : history               : iobrokerPROD                             -  enabled
            + system.adapter.hue-extended.0           : hue-extended          : iobrokerPROD                             -  enabled
              system.adapter.hue.0                    : hue                   : iobrokerPROD                             - disabled, port: 443
              system.adapter.ical.0                   : ical                  : iobrokerPROD                             -  enabled
            + system.adapter.info.0                   : info                  : iobrokerPROD                             -  enabled
            + system.adapter.iot.0                    : iot                   : iobrokerPROD                             -  enabled
            + system.adapter.jarvis.0                 : jarvis                : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
            + system.adapter.jarvis.1                 : jarvis                : iobrokerPROD                             -  enabled
            + system.adapter.jarvis.2                 : jarvis                : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
            + system.adapter.javascript.0             : javascript            : iobrokerPROD                             -  enabled
              system.adapter.javascript.1             : javascript            : iobrokerPROD                             - disabled
              system.adapter.meross.0                 : meross                : iobrokerPROD                             - disabled
            + system.adapter.mqtt.0                   : mqtt                  : iobrokerPROD                             -  enabled, port: 1885, bind: 0.0.0.0
            + system.adapter.notificationforandroidtv.0: notificationforandroidtv: iobrokerPROD                             -  enabled
            + system.adapter.onvif.0                  : onvif                 : iobrokerPROD                             -  enabled, port: 8000
            + system.adapter.onvif.1                  : onvif                 : iobrokerPROD                             -  enabled, port: 8000
              system.adapter.pegelalarm.0             : pegelalarm            : iobrokerPROD                             -  enabled
            + system.adapter.ping.0                   : ping                  : iobrokerPROD                             -  enabled
              system.adapter.proxy.0                  : proxy                 : iobrokerPROD                             -  enabled
            + system.adapter.pushover.0               : pushover              : iobrokerPROD                             -  enabled
            + system.adapter.rest-api.0               : rest-api              : iobrokerPROD                             -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
            + system.adapter.rssfeed.0                : rssfeed               : iobrokerPROD                             -  enabled
            + system.adapter.simple-api.0             : simple-api            : iobrokerPROD                             -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
            + system.adapter.snmp.0                   : snmp                  : iobrokerPROD                             -  enabled
            + system.adapter.sonoff.0                 : sonoff                : iobrokerPROD                             -  enabled, port: 1883, bind: 0.0.0.0
              system.adapter.spotify-premium.0        : spotify-premium       : iobrokerPROD                             - disabled
            + system.adapter.tankerkoenig.0           : tankerkoenig          : iobrokerPROD                             -  enabled
            + system.adapter.telegram.0               : telegram              : iobrokerPROD                             -  enabled, port: 8443, bind: 0.0.0.0
            + system.adapter.telegram.1               : telegram              : iobrokerPROD                             -  enabled, port: 8443, bind: 0.0.0.0
            + system.adapter.terminal.0               : terminal              : iobrokerPROD                             -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
            + system.adapter.tr-064.0                 : tr-064                : iobrokerPROD                             -  enabled
            + system.adapter.trashschedule.0          : trashschedule         : iobrokerPROD                             -  enabled
              system.adapter.tvspielfilm.0            : tvspielfilm           : iobrokerPROD                             -  enabled
              system.adapter.twinkly.0                : twinkly               : iobrokerPROD                             - disabled
            + system.adapter.virtualpowermeter.0      : virtualpowermeter     : iobrokerPROD                             -  enabled
            + system.adapter.vis-2.0                  : vis-2                 : iobrokerPROD                             -  enabled
            + system.adapter.web.0                    : web                   : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.web.1                    : web                   : iobrokerPROD                             -  enabled, port: 8083, bind: 0.0.0.0, run as: admin
            + system.adapter.wifilight.0              : wifilight             : iobrokerPROD                             -  enabled
            + system.adapter.wled.0                   : wled                  : iobrokerPROD                             -  enabled
            + system.adapter.zigbee.0                 : zigbee                : iobrokerPROD                             -  enabled, port: /dev/ttyUSB0
            
            + instance is alive
            
            Enabled adapters with bindings
            + system.adapter.admin.0                  : admin                 : iobrokerPROD                             -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.cameras.0                : cameras               : iobrokerPROD                             -  enabled, port: 8200, bind: 127.0.0.1
            + system.adapter.jarvis.0                 : jarvis                : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
            + system.adapter.jarvis.2                 : jarvis                : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
            + system.adapter.mqtt.0                   : mqtt                  : iobrokerPROD                             -  enabled, port: 1885, bind: 0.0.0.0
            + system.adapter.onvif.0                  : onvif                 : iobrokerPROD                             -  enabled, port: 8000
            + system.adapter.onvif.1                  : onvif                 : iobrokerPROD                             -  enabled, port: 8000
            + system.adapter.rest-api.0               : rest-api              : iobrokerPROD                             -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
            + system.adapter.simple-api.0             : simple-api            : iobrokerPROD                             -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
            + system.adapter.sonoff.0                 : sonoff                : iobrokerPROD                             -  enabled, port: 1883, bind: 0.0.0.0
            + system.adapter.telegram.0               : telegram              : iobrokerPROD                             -  enabled, port: 8443, bind: 0.0.0.0
            + system.adapter.telegram.1               : telegram              : iobrokerPROD                             -  enabled, port: 8443, bind: 0.0.0.0
            + system.adapter.terminal.0               : terminal              : iobrokerPROD                             -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
            + system.adapter.web.0                    : web                   : iobrokerPROD                             -  enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.web.1                    : web                   : iobrokerPROD                             -  enabled, port: 8083, bind: 0.0.0.0, run as: admin
            + system.adapter.zigbee.0                 : zigbee                : iobrokerPROD                             -  enabled, port: /dev/ttyUSB0
            
            ioBroker-Repositories
            stable        : http://download.iobroker.net/sources-dist.json
            beta          : http://download.iobroker.net/sources-dist-latest.json
            
            Active repo(s): beta
            
            Installed ioBroker-Instances
            Used repository: beta
            Adapter    "admin"        : 7.0.19   , installed 7.0.19
            Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
            Adapter    "backitup"     : 3.0.10   , installed 3.0.10
            Adapter    "birthdays"    : 3.0.1    , installed 3.0.1
            Adapter    "bring"        : 1.8.4    , installed 1.8.4
            Adapter    "broadlink2"   : 2.3.0    , installed 2.3.0
            Adapter    "cameras"      : 2.1.2    , installed 2.1.2
            Adapter    "chromecast"   : 3.4.1    , installed 3.4.1
            Adapter    "cloud"        : 5.0.1    , installed 5.0.1
            Adapter    "daswetter"    : 3.1.15   , installed 3.1.15
            Adapter    "devices"      : 1.1.5    , installed 1.1.5
            Adapter    "discovery"    : 5.0.0    , installed 5.0.0
            Adapter    "dwd"          : 2.8.5    , installed 2.8.5
            Adapter    "echarts"      : 1.8.4    , installed 1.8.4
            Adapter    "email"        : 1.3.1    , installed 1.3.1
            Adapter    "fahrplan"     : 1.2.3    , installed 1.2.3
            Adapter    "flot"         : 1.12.0   , installed 1.12.0
            Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
            Adapter    "fullybrowser" : 3.0.12   , installed 2.2.0  [Updatable]
            Adapter    "history"      : 3.0.1    , installed 3.0.1
            Adapter    "hue"          : 3.12.0   , installed 3.12.0
            Adapter    "ical"         : 1.15.0   , installed 1.15.0
            Adapter    "iot"          : 3.3.0    , installed 3.3.0
            Adapter    "jarvis"       : 3.1.8    , installed 3.2.0-beta.47
            Adapter    "javascript"   : 8.7.3    , installed 8.6.0  [Updatable]
            Controller "js-controller": 6.0.9    , installed 5.0.19 [Updatable]
            Adapter    "meross"       : 1.17.0   , installed 1.17.0
            Adapter    "mqtt"         : 6.0.0    , installed 6.0.0
            Adapter    "notificationforandroidtv": 3.0.4, installed 3.0.4
            Adapter    "onvif"        : 1.1.4    , installed 1.1.4
            Adapter    "pegelalarm"   : 1.3.3    , installed 1.3.3
            Adapter    "ping"         : 1.6.2    , installed 1.6.2
            Adapter    "proxy"        : 1.3.2    , installed 1.3.2
            Adapter    "pushover"     : 4.0.0    , installed 4.0.0
            Adapter    "reolink"      : 1.1.0    , installed 1.1.0
            Adapter    "rest-api"     : 2.0.3    , installed 2.0.3
            Adapter    "rssfeed"      : 3.0.0    , installed 3.0.0
            Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
            Adapter    "snmp"         : 3.2.0    , installed 3.2.0
            Adapter    "socketio"     : 6.7.1    , installed 6.7.1
            Adapter    "sonoff"       : 3.1.0    , installed 3.1.0
            Adapter    "spotify-premium": 1.5.0  , installed 1.5.0
            Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
            Adapter    "telegram"     : 3.9.0    , installed 3.9.0
            Adapter    "terminal"     : 1.0.0    , installed 1.0.0
            Adapter    "tibberlink"   : 3.4.3    , installed 3.4.3
            Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
            Adapter    "trashschedule": 3.3.0    , installed 3.3.0
            Adapter    "tvspielfilm"  : 2.1.0    , installed 2.1.0
            Adapter    "twinkly"      : 1.0.14   , installed 1.0.14
            Adapter    "virtualpowermeter": 1.4.6, installed 1.4.6
            Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
            Adapter    "web"          : 6.3.0    , installed 6.3.0
            Adapter    "wifilight"    : 1.2.2    , installed 1.2.2
            Adapter    "wled"         : 0.7.3-beta.0, installed 0.7.2 [Updatable]
            Adapter    "ws"           : 2.6.2    , installed 2.6.2
            Adapter    "zigbee"       : 1.10.3   , installed 1.10.3
            
            Objects and States
            Please stand by - This may take a while
            Objects:        27922
            States:         22122
            
            *** OS-Repositories and Updates ***
            Hit:1 http://security.debian.org bookworm-security InRelease
            Hit:2 http://ftp.debian.org/debian bookworm InRelease
            Hit:3 http://ftp.debian.org/debian bookworm-updates InRelease
            Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
            Reading package lists...
            Pending Updates: 3
            
            *** Listening Ports ***
            Active Internet connections (only servers)
            Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
            tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      1002       2908608    586/io.mqtt.0
            tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1002       2909656    409/io.sonoff.0
            tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          2919832    1334/master
            tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          2899893    1/init
            tcp        0      0 127.0.0.1:8200          0.0.0.0:*               LISTEN      1002       2923868    1649/io.cameras.0
            tcp        0      0 0.0.0.0:8402            0.0.0.0:*               LISTEN      1002       2927763    1871/io.jarvis.2
            tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1002       2916360    725/io.jarvis.0
            tcp        0      0 0.0.0.0:8401            0.0.0.0:*               LISTEN      1002       2923337    1810/io.jarvis.1
            tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1002       2903826    155/iobroker.js-con
            tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1002       2904576    155/iobroker.js-con
            tcp6       0      0 :::8087                 :::*                    LISTEN      1002       2920853    1474/io.simple-api.
            tcp6       0      0 :::8082                 :::*                    LISTEN      1002       2912107    683/io.web.0
            tcp6       0      0 :::8083                 :::*                    LISTEN      1002       2927793    1892/io.web.1
            tcp6       0      0 :::8081                 :::*                    LISTEN      1002       2896741    181/io.admin.0
            tcp6       0      0 :::8093                 :::*                    LISTEN      1002       2923142    1740/io.rest-api.0
            tcp6       0      0 :::8088                 :::*                    LISTEN      1002       2917396    745/io.terminal.0
            tcp6       0      0 :::111                  :::*                    LISTEN      0          2899895    1/init
            tcp6       0      0 :::22                   :::*                    LISTEN      0          2904527    1/init
            tcp6       0      0 ::1:25                  :::*                    LISTEN      0          2919833    1334/master
            udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1002       2912479    502/io.broadlink2.0
            udp        0      0 0.0.0.0:48534           0.0.0.0:*                           1002       2911519    480/io.snmp.0
            udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          2899894    1/init
            udp        0      0 0.0.0.0:50201           0.0.0.0:*                           1002       2912482    502/io.broadlink2.0
            udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1002       2922591    1564/io.wled.0
            udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1002       2913302    606/io.chromecast.0
            udp        0      0 0.0.0.0:57664           0.0.0.0:*                           1002       2912481    502/io.broadlink2.0
            udp        0      0 0.0.0.0:42730           0.0.0.0:*                           1002       2912483    502/io.broadlink2.0
            udp6       0      0 :::111                  :::*                                0          2899896    1/init
            
            *** Log File - Last 25 Lines ***
            
            2024-07-26 00:21:07.161  - info: host.iobrokerPROD stopInstance system.adapter.vis-2.0 send kill signal
            2024-07-26 00:21:07.558  - info: vis-2.0 (15962) terminating
            2024-07-26 00:21:07.588  - info: host.iobrokerPROD instance system.adapter.vis-2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
            2024-07-26 00:21:10.196  - info: host.iobrokerPROD instance system.adapter.vis-2.0 started with pid 17036
            2024-07-26 00:21:10.384  - debug: vis-2.0 (17036) Redis Objects: Use Redis connection: 127.0.0.1:9001
            2024-07-26 00:21:10.405  - debug: vis-2.0 (17036) Objects client ready ... initialize now
            2024-07-26 00:21:10.405  - debug: vis-2.0 (17036) Objects create System PubSub Client
            2024-07-26 00:21:10.406  - debug: vis-2.0 (17036) Objects create User PubSub Client
            2024-07-26 00:21:10.439  - debug: vis-2.0 (17036) Objects client initialize lua scripts
            2024-07-26 00:21:10.441  - debug: vis-2.0 (17036) Objects connected to redis: 127.0.0.1:9001
            2024-07-26 00:21:10.459  - debug: vis-2.0 (17036) Redis States: Use Redis connection: 127.0.0.1:9000
            2024-07-26 00:21:10.469  - debug: vis-2.0 (17036) States create System PubSub Client
            2024-07-26 00:21:10.469  - debug: vis-2.0 (17036) States create User PubSub Client
            2024-07-26 00:21:10.527  - debug: vis-2.0 (17036) States connected to redis: 127.0.0.1:9000
            2024-07-26 00:21:10.542  - debug: vis-2.0 (17036) Plugin sentry Initialize Plugin (enabled=true)
            2024-07-26 00:21:10.650  - info: vis-2.0 (17036) starting. Version 2.9.64 in /opt/iobroker/node_modules/iobroker.vis-2, node: v20.16.0, js-controller: 5.0.19
            2024-07-26 00:21:10.862  - info: vis-2.0 (17036) vis-2 license is OK.
            2024-07-26 00:21:27.605  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: running  function after change of hue-extended.0.lights.001-lampe_tisch.action.level
            2024-07-26 00:21:58.530  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: missing update instructions for scenes.status.status
            2024-07-26 00:21:58.530  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: {"status":{"status":{"active":"inactive"}}}
            2024-07-26 00:22:24.221  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: missing update instructions for scenes.status.status
            2024-07-26 00:22:24.221  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: {"status":{"status":{"active":"static"}}}
            2024-07-26 00:22:24.273  - info: javascript.0 (208) script.js.HUE-EXTENDED.HUE-NEWAPI: running  function after change of hue-extended.0.lights.001-lampe_tisch.action.level
            2024-07-26 00:23:18.639  - info: fahrplan.0 (1825) Updated 1 routes, 1 enabled and 0 disabled
            2024-07-26 00:23:18.936  - info: fahrplan.0 (1825) Updated 1 departure timetables, 1 enabled and 0 disabled
            
            

            Was kann ich tun? Wo muss ich ansetzen?
            Vielen Dank

            EDIT:
            Schau ich in die Übersicht dann sehe ich die Kacheln
            340d41a4-1c31-4946-8b30-1bf64c4a9b05-image.png
            und kann diese auch nutzen.
            Welche Kachel soll man denn nutzen?
            Visualisierung Next Generation (sehr wahrscheinlich) für die Entwicklung
            Wofür hat man die "RunTime"-Kacheln? Um direkt ein fertiges Projekt zu starten?

            Bernd1967B Offline
            Bernd1967B Offline
            Bernd1967
            schrieb am zuletzt editiert von Bernd1967
            #8

            @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

            Welche Kachel soll man denn nutzen?
            Visualisierung Next Generation (sehr wahrscheinlich) für die Entwicklung
            Wofür hat man die "RunTime"-Kacheln? Um direkt ein fertiges Projekt zu starten?

            Korrekt, bei mir öffnet sich dann die DemoView

            1 Antwort Letzte Antwort
            1
            • Bernd1967B Bernd1967

              Was mir noch aufgefallen ist das bei mir der vis-2 Adapter die selbe Portnummer hat wie der vis Adapter.
              Bei Euch ist eine ander Portnummer.

              vis Link:
              http://xxx.xxx.xxx:8082/vis/edit.html#DemoView

              vis-2 Link:
              http://xxx.xxx.xxx:8082/vis-2/edit.html#DemoView

              M Online
              M Online
              MCU
              schrieb am zuletzt editiert von MCU
              #9

              @bernd1967 Die unterschiedlichen Port nummern kommen von den Web-Instanzen.

              Das könnte aber der Grund sein, dafür das der Instanzlink nicht funktioniert?
              Da mehrere Web-Instanzen vorhanden sind, weiß er nicht welche er nehmen soll?

              NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
              Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

              sigi234S 1 Antwort Letzte Antwort
              0
              • Bernd1967B Bernd1967

                @MCU

                Hatte Gestern auch mal zum testen vis-2 Adapter installiert.
                Hier funktioniert es mit beiden Instanz Link (vis und vis-2)
                Könnte es vielleicht mit HTTPS zusammenhängen ?
                Ich benutzte weiterhin unverschlüsselte Verbindung.
                Oder Browser cache löschen ?
                Fehler in der Konsole ?

                Admin:7.0.19
                JS-Controller: 6.0.9
                Node.js: v20.16.0
                NPM: 10.8.1

                M Online
                M Online
                MCU
                schrieb am zuletzt editiert von
                #10

                @bernd1967 Cache gelöscht bringt aber nichts. Instanz-Links funktionieren nicht.

                NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
                Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

                1 Antwort Letzte Antwort
                0
                • M MCU

                  @bernd1967 Die unterschiedlichen Port nummern kommen von den Web-Instanzen.

                  Das könnte aber der Grund sein, dafür das der Instanzlink nicht funktioniert?
                  Da mehrere Web-Instanzen vorhanden sind, weiß er nicht welche er nehmen soll?

                  sigi234S Online
                  sigi234S Online
                  sigi234
                  Forum Testing Most Active
                  schrieb am zuletzt editiert von
                  #11

                  @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                  @bernd1967 Die unterschiedlichen Port nummern kommen von den Web-Instanzen.

                  Das könnte aber der Grund sein, dafür das der Instanzlink nicht funktioniert?
                  Da mehrere Web-Instanzen vorhanden sind, weiß er nicht welche er nehmen soll?

                  Nein, habe auch mehrere Web Instanzen und es hat bis gestern immer funktioniert

                  Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
                  Immer Daten sichern!

                  M 1 Antwort Letzte Antwort
                  0
                  • sigi234S sigi234

                    @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                    @bernd1967 Die unterschiedlichen Port nummern kommen von den Web-Instanzen.

                    Das könnte aber der Grund sein, dafür das der Instanzlink nicht funktioniert?
                    Da mehrere Web-Instanzen vorhanden sind, weiß er nicht welche er nehmen soll?

                    Nein, habe auch mehrere Web Instanzen und es hat bis gestern immer funktioniert

                    M Online
                    M Online
                    MCU
                    schrieb am zuletzt editiert von
                    #12

                    @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                    NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
                    Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

                    sigi234S 2 Antworten Letzte Antwort
                    0
                    • M MCU

                      @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                      sigi234S Online
                      sigi234S Online
                      sigi234
                      Forum Testing Most Active
                      schrieb am zuletzt editiert von
                      #13

                      @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                      @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                      Ja

                      Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
                      Immer Daten sichern!

                      Bernd1967B 1 Antwort Letzte Antwort
                      0
                      • sigi234S sigi234

                        @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                        @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                        Ja

                        Bernd1967B Offline
                        Bernd1967B Offline
                        Bernd1967
                        schrieb am zuletzt editiert von
                        #14

                        Wenn ich versuche eine zweite Instanz vom vis-2 Adapter hinzuzufügen kommt folgender Fehler:

                        ERROR: Process exited with code 19
                        $ iobroker add vis-2 auto --host Server(SmartHome) --debug
                        host.Server(SmartHome) error: this adapter does not allow multiple instances
                        ERROR: Process exited with code 19

                        HomoranH 1 Antwort Letzte Antwort
                        0
                        • M Online
                          M Online
                          MCU
                          schrieb am zuletzt editiert von
                          #15

                          @bernd1967 Ich habe keine 2. VIS-2- Instanz sondern eine 2. WEB-Instanz

                          NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
                          Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

                          1 Antwort Letzte Antwort
                          0
                          • Bernd1967B Bernd1967

                            Wenn ich versuche eine zweite Instanz vom vis-2 Adapter hinzuzufügen kommt folgender Fehler:

                            ERROR: Process exited with code 19
                            $ iobroker add vis-2 auto --host Server(SmartHome) --debug
                            host.Server(SmartHome) error: this adapter does not allow multiple instances
                            ERROR: Process exited with code 19

                            HomoranH Nicht stören
                            HomoranH Nicht stören
                            Homoran
                            Global Moderator Administrators
                            schrieb am zuletzt editiert von
                            #16

                            @bernd1967 sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                            Wenn ich versuche eine zweite Instanz vom vis-2 Adapter hinzuzufügen kommt folgender Fehler:

                            klar doch!
                            Das tut man ja auch nicht.

                            @bernd1967 sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                            this adapter does not allow multiple instances

                            kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                            der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                            Bernd1967B 1 Antwort Letzte Antwort
                            0
                            • HomoranH Homoran

                              @bernd1967 sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                              Wenn ich versuche eine zweite Instanz vom vis-2 Adapter hinzuzufügen kommt folgender Fehler:

                              klar doch!
                              Das tut man ja auch nicht.

                              @bernd1967 sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                              this adapter does not allow multiple instances

                              Bernd1967B Offline
                              Bernd1967B Offline
                              Bernd1967
                              schrieb am zuletzt editiert von
                              #17

                              Hab ich mir gedacht :-) aktuell kann ich mit Admin 7 aber auch keine zweite web Instanz hinzufügen.
                              Aber dafür gibt es auf Github schon ein Issue....

                              1 Antwort Letzte Antwort
                              0
                              • M MCU

                                @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                                sigi234S Online
                                sigi234S Online
                                sigi234
                                Forum Testing Most Active
                                schrieb am zuletzt editiert von sigi234
                                #18

                                @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                                @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                                Hallo, bin mal auf die Stable vom Admin gegangen, gleicher Fehler.
                                Doch kein Admin Problem? JS-Controller?

                                Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
                                Immer Daten sichern!

                                Bernd1967B 1 Antwort Letzte Antwort
                                0
                                • sigi234S sigi234

                                  @mcu sagte in VIS-2 Start über Instanzlink nicht möglich Voraussetzungen?:

                                  @sigi234 Hatte man nicht früher eine Auswahl, wenn man drauf geklickt, welche Web-Instanz man nutzen möchte?

                                  Hallo, bin mal auf die Stable vom Admin gegangen, gleicher Fehler.
                                  Doch kein Admin Problem? JS-Controller?

                                  Bernd1967B Offline
                                  Bernd1967B Offline
                                  Bernd1967
                                  schrieb am zuletzt editiert von
                                  #19

                                  Mit Admin 7.0.21 funktioniert das hinzufügen wieder.
                                  Vielleicht gehts dann auch mit dem Instanz LInk bei Euch ?

                                  1 Antwort Letzte Antwort
                                  0
                                  • M Online
                                    M Online
                                    MCU
                                    schrieb am zuletzt editiert von
                                    #20

                                    @bernd1967 Nein, keine Änderung.

                                    NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
                                    Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

                                    1 Antwort Letzte Antwort
                                    0
                                    • wendy2702W Online
                                      wendy2702W Online
                                      wendy2702
                                      schrieb am zuletzt editiert von
                                      #21

                                      Könnt ihr mal schauen ob es nur der VIS2 Instanz Link ist?

                                      Bei mir gehen schon seit längerem diverse nicht mehr

                                      Bitte keine Fragen per PN, die gehören ins Forum!

                                      Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • wendy2702W wendy2702

                                        Könnt ihr mal schauen ob es nur der VIS2 Instanz Link ist?

                                        Bei mir gehen schon seit längerem diverse nicht mehr

                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von
                                        #22

                                        Hier funktionieren alle Instanzlinks. Inklusive vis2. Da komme ich auf den Editor.

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        M 1 Antwort Letzte Antwort
                                        0
                                        • Thomas BraunT Thomas Braun

                                          Hier funktionieren alle Instanzlinks. Inklusive vis2. Da komme ich auf den Editor.

                                          M Online
                                          M Online
                                          MCU
                                          schrieb am zuletzt editiert von
                                          #23

                                          @thomas-braun Hast du 2 Web-Instanzen, oder nur eine?

                                          NUC i7 64GB mit Proxmox ---- Jarvis Infos Aktualisierungen der Doku auf Instagram verfolgen -> mcuiobroker Instagram
                                          Wenn Euch mein Vorschlag geholfen hat, bitte rechts "^" klicken.

                                          Thomas BraunT 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          826

                                          Online

                                          32.5k

                                          Benutzer

                                          81.6k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe