vedirect keine Verbindung bei rasp 4

mere13

Hallo

nachdem vedirect von DrotmotiX am rasp 3b problemlos lief zusammen mit dem USB Kabel von victroenic (Bluesolar MPTT 100/50) bin ich auf rasp 4 umgestiegen und hab alles genauso installiert. iobroker und Adapter. Leider keine Verbindung zum USB. Hat jemand eine Idee, woran das liegt? Ein paar Details:

Get error "Issue handling serial port connection : {}" and no connection to USB. power supply is no problem, because active usb hub. also tried without hub. same result. MPTT Bluesolar 100/50, ve.direct USB
settings are /dev/ttyUSB0 , both times on 0sec
is there an issue with rasp 4? any idea?
These are my usb devices:
usb-devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=06.06
S: Manufacturer=Linux 6.6.20+rpt-rpi-v8 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
#Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
Ver= 2.10 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2109 ProdID=3431 Rev=04.21
S: Product=USB2.0 Hub
#Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 4
Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0610 Rev=92.24
S: Manufacturer=GenesysLogic
S: Product=USB2.0 Hub
#Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

T: Bus=01 Lev=03 Prnt=03 Port=03 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6015 Rev=10.00
S: Manufacturer=VictronEnergy BV
S: Product=VE Direct cable
S: SerialNumber=VE6WATIJ
#Ifs= 1 Cfg#= 1 Atr=80 MxPwr=90mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=06.06
S: Manufacturer=Linux 6.6.20+rpt-rpi-v8 xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
#Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

Versions:

Adapter version: recent
JS-Controller version: 5.0.19
Node version: 18.20.2
Operating system: rasp OS 64 bit

Homoran

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

hab alles genauso installiert.

incl. des identischen USB Ports?
wie sieht die config aus?

was ergibt bei dir

pi@tinkerboard:~$ ls /dev/serial/by-id/
usb-FTDI_FT232R_USB_UART_A10NBMVW-if00-port0
usb-FTDI_FT232R_USB_UART_AB0OH9QR-if00-port0
usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_01066523-if00-port0
pi@tinkerboard:~$

Thomas Braun

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

settings are /dev/ttyUSB0 , both times on 0sec

Setz da den Link aus /dev/serial/by-id rein, nicht die Gerätedatei direkt.

mere13

@thomas-braun marcel@rasp:~ $ ls /dev/serial/by-id
usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

und was soll ich jetzt einsetzen?

Homoran

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

und was soll ich jetzt einsetzen?

genau das

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

so wie hier

mere13

leider nicht besser
Bildschirmfoto 2024-04-14 um 10.37.40.png

Thomas Braun

@mere13

Zeig mal die Langfassung von

iob diag

mere13

@mere13 iobdiagsummary.txt

Thomas Braun

@mere13

Das ist nicht die Langfassung sondern die Zusammenfassung.

mere13

@thomas-braun sorry.
iobdiag.txt

Homoran

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

@thomas-braun sorry.
iobdiag.txt

bitte in code-tags gesetzt posten

mere13

@homoran verstehe ich leider nicht. wie bekomme ich die code-tags? Hab alles per copy-paste übertragen. So?

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: rasp
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.20+rpt-rpi-v8
    Architecture: arm64

Model		: Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 11:15:46 up 1 day,  1:06,  3 users,  load average: 0.14, 0.26, 0.34
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-04-14 11:15:47 CEST
           Universal time: Sun 2024-04-14 09:15:47 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
marcel
/home/marcel
marcel adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: 	false
Desktop: 	
Terminal: 	tty
Boot Target: 	graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.2G        5.7G        1.4M        1.4G        6.9G
Swap:           104M          0B        104M
Total:          8.3G        1.2G        5.8G

         7810 M total memory
         1184 M used memory
         1421 M active memory
          775 M inactive memory
         5445 M free memory
          122 M buffer memory
         1181 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT            LOAD   ACTIVE SUB    DESCRIPTION
* lightdm.service loaded failed failed Light Display Manager

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     782M  1.3M  780M   1% /run
/dev/mmcblk0p2 ext4       58G  6.4G   48G  12% /
tmpfs          tmpfs     3.9G  8.0K  3.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   82M  429M  17% /boot/firmware
tmpfs          tmpfs     782M   28K  781M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Apr 13 10:09:04 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:B1:D2:3A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=8a167c7b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Sat Apr 13 10:09:07 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none.
[Sat Apr 13 10:09:09 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
870M	/var/
341M	/var/cache
334M	/var/cache/apt
322M	/var/lib
221M	/var/cache/apt/archives

Archived and active journals take up 104.0M in the file system.

/opt/iobroker/backups:
2.9M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
62M	/opt/iobroker/iobroker-data/
31M	/opt/iobroker/iobroker-data/backup-objects
19M	/opt/iobroker/iobroker-data/files
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static

The five largest files in iobroker-data are:
8.8M	/opt/iobroker/iobroker-data/objects.jsonl
6.3M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
4.6M	/opt/iobroker/iobroker-data/states.jsonl
2.8M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
2.6M	/opt/iobroker/iobroker-data/files/ble.admin/build/index.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs 	v18.20.2
/usr/bin/node 		v18.20.2
/usr/bin/npm 		10.5.0
/usr/bin/npx 		10.5.0
/usr/bin/corepack 	0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.2-1nodesource1
  Version table:
 *** 18.20.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.20.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.19
admin: 		6.13.16
javascript: 	"javascript" not found

Adapters from github: 	1

Adapter State
+ system.adapter.admin.0                  : admin                 : rasp                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : rasp                                     -  enabled
+ system.adapter.ble.0                    : ble                   : rasp                                     -  enabled
+ system.adapter.discovery.0              : discovery             : rasp                                     -  enabled
+ system.adapter.influxdb.0               : influxdb              : rasp                                     -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : rasp                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mystrom.0                : mystrom               : rasp                                     -  enabled
+ system.adapter.vedirect.0               : vedirect              : rasp                                     -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : rasp                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : rasp                                     -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : rasp                                     -  enabled, port: 1883, bind: 0.0.0.0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "ble"          : 0.14.0   , installed 0.14.0
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "mystrom"      : 0.0.14   , installed 0.0.14

Objects and States
Please stand by - This may take a while
Objects: 	385
States: 	287

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          2106529    42615/cupsd         
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       42475      11730/io.mqtt.0     
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       8479       1072/iobroker.js-co 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       8472       1072/iobroker.js-co 
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          9234       778/sshd: /usr/sbin 
tcp6       0      0 :::8086                 :::*                    LISTEN      999        6022       896/influxd         
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       7635       1122/io.admin.0     
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          2106528    42615/cupsd         
tcp6       0      0 :::3000                 :::*                    LISTEN      113        6061       1071/grafana        
tcp6       0      0 :::22                   :::*                    LISTEN      0          9236       778/sshd: /usr/sbin 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1857       626/dhcpcd: [networ 
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          2107407    42643/cups-browsed  
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        7074       570/avahi-daemon: r 
udp        0      0 0.0.0.0:38954           0.0.0.0:*                           104        7076       570/avahi-daemon: r 
udp6       0      0 :::36418                :::*                                104        7077       570/avahi-daemon: r 
udp6       0      0 :::546                  :::*                                0          1859       626/dhcpcd: [networ 
udp6       0      0 :::5353                 :::*                                104        7075       570/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2024-04-14 10:37:15.420  - debug: vedirect.0 (70677) Objects client ready ... initialize now
2024-04-14 10:37:15.423  - debug: vedirect.0 (70677) Objects create System PubSub Client
2024-04-14 10:37:15.425  - debug: vedirect.0 (70677) Objects create User PubSub Client
2024-04-14 10:37:15.461  - debug: vedirect.0 (70677) Objects client initialize lua scripts
2024-04-14 10:37:15.470  - debug: vedirect.0 (70677) Objects connected to redis: 127.0.0.1:9001
2024-04-14 10:37:15.488  - debug: vedirect.0 (70677) Redis States: Use Redis connection: 127.0.0.1:9000
2024-04-14 10:37:15.496  - debug: vedirect.0 (70677) States create System PubSub Client
2024-04-14 10:37:15.497  - debug: vedirect.0 (70677) States create User PubSub Client
2024-04-14 10:37:15.511  - debug: vedirect.0 (70677) States connected to redis: 127.0.0.1:9000
2024-04-14 10:37:15.541  - debug: vedirect.0 (70677) Plugin sentry Initialize Plugin (enabled=true)
2024-04-14 10:37:15.965  - info: vedirect.0 (70677) starting. Version 0.3.3 (non-npm: DrozmotiX/ioBroker.vedirect#8435302add9dc410535180c6c0d5ebbaef2eeb1e) in /opt/iobroker/node_modules/iobroker.vedirect, node: v18.20.2, js-controller: 5.0.19
2024-04-14 10:37:15.987  - info: vedirect.0 (70677) Starting VE.Direct with Protocol Version 3.33 and configurable expiring state capability
2024-04-14 10:37:15.998  - error: vedirect.0 (70677) Issue handling serial port connection : {}
2024-04-14 10:37:45.453  - info: admin.0 (1122) ==> Connected system.user.admin from ::ffff:192.168.2.201
2024-04-14 10:37:55.638  - info: admin.0 (1122) <== Disconnect system.user.admin from ::ffff:192.168.2.201 
2024-04-14 10:39:42.298  - info: admin.0 (1122) <== Disconnect system.user.admin from ::ffff:192.168.2.201 admin
2024-04-14 10:40:09.177  - info: mystrom.0 (1240) Set update interval for 9C9C1FE323DC to 60
2024-04-14 10:43:51.983  - info: admin.0 (1122) ==> Connected system.user.admin from ::ffff:192.168.2.201
2024-04-14 10:44:41.987  - info: admin.0 (1122) <== Disconnect system.user.admin from ::ffff:192.168.2.201 admin
2024-04-14 10:57:05.970  - info: admin.0 (1122) ==> Connected system.user.admin from ::ffff:192.168.2.201
2024-04-14 11:01:56.002  - info: admin.0 (1122) <== Disconnect system.user.admin from ::ffff:192.168.2.201 admin
2024-04-14 11:06:49.715  - info: admin.0 (1122) ==> Connected system.user.admin from ::ffff:192.168.2.201
2024-04-14 11:08:09.723  - info: admin.0 (1122) <== Disconnect system.user.admin from ::ffff:192.168.2.201 admin
2024-04-14 11:10:09.427  - info: mystrom.0 (1240) Set update interval for 9C9C1FE323DC to 60
2024-04-14 11:14:58.222  - info: admin.0 (1122) ==> Connected system.user.admin from ::ffff:192.168.2.201

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

Homoran

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

da steht er.

in deinem Screenshot leider nicht zu lesen.
Aber da sind anscheinend Leerzeichen verwendet und der abschließende Slash fehlt

Thomas Braun

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

Boot Target: graphical.target

Setz das auf

sudo systemctl set-default multi-user.target

Nach einem Neustart:

ls -la /dev/serial/by-id

mere13

@thomas-braun said in vedirect keine Verbindung bei rasp 4:

ls -la /dev/serial/by-id

Bekomme das:
total 0
drwxr-xr-x 2 root root 60 Apr 14 12:29 .
drwxr-xr-x 4 root root 80 Apr 14 12:29 ..
lrwxrwxrwx 1 root root 13 Apr 14 12:29 usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0 -> ../../ttyUSB0

und im Adapter ist das eingetragen, keine Leerzeichen
/dev/serial/by-id usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

DJMarc75

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

keine Leerzeichen

doch, zwischen id und usb

/dev/serial/by-id usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

mere13

@djmarc75 ok. sorry, war blind. habs jetzt korrigiert und mit / ersetzt. Was meintest Du mit abschließendem Slash? Jetzt steht das da, aber leider noch keine Verbindung:

/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

Thomas Braun

@mere13

Es muss exakt das eingetragen werden:

/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6WATIJ-if00-port0

Rechte sind vorhanden?

ls -la /dev/ttyUSB0
sudo -u iobroker groups

mere13

@thomas-braun said in vedirect keine Verbindung bei rasp 4:

sudo -u iobroker groups

mit copy-paste übertragen. leider nix.

marcel@rasp:~ $ ls -la /dev/ttyUSB0
sudo -u iobroker groups
crw-rw----+ 1 root plugdev 188, 0 Apr 14 12:29 /dev/ttyUSB0
iobroker tty dialout audio video bluetooth gpio i2c

Thomas Braun

@mere13 sagte in vedirect keine Verbindung bei rasp 4:

leider nix.

Wie nix? Da sind doch die Ausgaben. Würde man besser sehen, wenn du freundlicherweise für solche Ausgaben aus der Konsole die CodeTags verwenden würdest.

Der user 'iobroker' ist nicht in der Gruppe 'plugdev' drin. Deswegen darf der mit dem Gerät nix anfangen.
Setz den da rein:

sudo usermod -a -G plugdev iobroker
iob stop
sudo reboot

Sollte danach funktionieren.

NEWS

vedirect keine Verbindung bei rasp 4

Support us

1.0k
Online

31.7k
Users

79.6k
Topics

1.3m
Posts

NEWS

vedirect keine Verbindung bei rasp 4

Support us

1.0kOnline

31.7kUsers

79.6kTopics

1.3mPosts

1.0k
Online

31.7k
Users

79.6k
Topics

1.3m
Posts