javascript startet nicht mehr
-
Ich hatte heute um ca 4:00 Uhr Nachts einen Totalausfall.
der iobroker (Raspberry/SD Karte) war zwar per Ping ansprechbar. aber weder der iobroker konnte geöffnet werden auch per ssh hatte ich keinen Zugriff mehr.
mangels eines HDMI Adapters konnte ich keinen Bildschirm anschließen. Daher hab ich den Stecker gezogen - kurz gewartet - Stecker wieder rein.Danach konnte ich per ssh zugreifen.
Hab dann direkt folgende Befehle abgesetzt:sudo apt update iob stop sudo apt full-upgrade sudo rebootMangels Expertenwissen hoffe ich, dass dies kein Fehler war. Denn seit dem läuft der javascript Adapter nicht mehr.
im Log kommt alle 30 Sekunden folgende Fehlermeldung:
2024-04-07 21:08:18.862 - [31merror[39m: host.smarthome Caught by controller[0]: node:internal/modules/cjs/loader:1443 2024-04-07 21:08:18.863 - [31merror[39m: host.smarthome Caught by controller[0]: throw err; 2024-04-07 21:08:18.863 - [31merror[39m: host.smarthome Caught by controller[0]: ^ 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: SyntaxError: /opt/iobroker/node_modules/iobroker.javascript/node_modules/mime-db/db.json: Unexpected end of JSON input 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at parse (<anonymous>) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._extensions..json (node:internal/modules/cjs/loader:1440:39) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1203:32) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:1019:12) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1231:19) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at require (node:internal/modules/helpers:177:18) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.javascript/node_modules/mime-db/index.js:12:18) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1364:14) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1422:10) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1203:32) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: Node.js v18.20.1 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome instance system.adapter.javascript.0 terminated with code 1 (JS_CONTROLLER_STOPPED)Kann mir hier bitte jemand helfen?
@rtwl sagte in javascript startet nicht mehr:
Daher hab ich den Stecker gezogen - kurz gewartet - Stecker wieder rein.
...
Mangels Expertenwissen hoffe ich, dass dies kein Fehler war. Denn seit dem läuft der javascript Adapter nicht mehr.Doch!
Damit hast Du Dir vermutlich das Dateisystem zerschossen.Du hast hoffentlich ein Backup?
Dann am besten mit neuer SD-Karte neu aufsetzen.Wenn so ein Pi eines überhaupt nicht gut verträgt, dann ist das ein "harter" Stromausfall.
Dass der Pi noch per Ping erreichbar war zeigt eigentlich, dass er lief.
Er war vermutlich nur derart ausgelastet, dass er nicht auf die Zugriffe reagieren konnte.Zeig mal die Langfassung von
iob diag"Any fool can write code that a computer can understand. Good programmers write code that humans can understand." (Martin Fowler, "Refactoring")
Proxmox 9.1.1 LXC|8 GB|Core i7-6700
HmIP|ZigBee|Tasmota|Unifi
Zabbix Certified Specialist
Konnte ich Dir helfen? Dann benutze bitte das Voting unten rechts im Beitrag -
Ich hatte heute um ca 4:00 Uhr Nachts einen Totalausfall.
der iobroker (Raspberry/SD Karte) war zwar per Ping ansprechbar. aber weder der iobroker konnte geöffnet werden auch per ssh hatte ich keinen Zugriff mehr.
mangels eines HDMI Adapters konnte ich keinen Bildschirm anschließen. Daher hab ich den Stecker gezogen - kurz gewartet - Stecker wieder rein.Danach konnte ich per ssh zugreifen.
Hab dann direkt folgende Befehle abgesetzt:sudo apt update iob stop sudo apt full-upgrade sudo rebootMangels Expertenwissen hoffe ich, dass dies kein Fehler war. Denn seit dem läuft der javascript Adapter nicht mehr.
im Log kommt alle 30 Sekunden folgende Fehlermeldung:
2024-04-07 21:08:18.862 - [31merror[39m: host.smarthome Caught by controller[0]: node:internal/modules/cjs/loader:1443 2024-04-07 21:08:18.863 - [31merror[39m: host.smarthome Caught by controller[0]: throw err; 2024-04-07 21:08:18.863 - [31merror[39m: host.smarthome Caught by controller[0]: ^ 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: SyntaxError: /opt/iobroker/node_modules/iobroker.javascript/node_modules/mime-db/db.json: Unexpected end of JSON input 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at parse (<anonymous>) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._extensions..json (node:internal/modules/cjs/loader:1440:39) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1203:32) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:1019:12) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1231:19) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at require (node:internal/modules/helpers:177:18) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.javascript/node_modules/mime-db/index.js:12:18) 2024-04-07 21:08:18.864 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1364:14) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1422:10) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1203:32) 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome Caught by controller[0]: Node.js v18.20.1 2024-04-07 21:08:18.865 - [31merror[39m: host.smarthome instance system.adapter.javascript.0 terminated with code 1 (JS_CONTROLLER_STOPPED)Kann mir hier bitte jemand helfen?
Installier den javascript-Adapter nochmal drüber.
Die Datei ist korrupt:
/opt/iobroker/node_modules/iobroker.javascript/node_modules/mime-db/db.json: Unexpected end of JSON input -
@rtwl sagte in javascript startet nicht mehr:
Daher hab ich den Stecker gezogen - kurz gewartet - Stecker wieder rein.
...
Mangels Expertenwissen hoffe ich, dass dies kein Fehler war. Denn seit dem läuft der javascript Adapter nicht mehr.Doch!
Damit hast Du Dir vermutlich das Dateisystem zerschossen.Du hast hoffentlich ein Backup?
Dann am besten mit neuer SD-Karte neu aufsetzen.Wenn so ein Pi eines überhaupt nicht gut verträgt, dann ist das ein "harter" Stromausfall.
Dass der Pi noch per Ping erreichbar war zeigt eigentlich, dass er lief.
Er war vermutlich nur derart ausgelastet, dass er nicht auf die Zugriffe reagieren konnte.Zeig mal die Langfassung von
iob diag@codierknecht sagte in javascript startet nicht mehr:
Zeig mal die Langfassung von iob diag
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 21:23:45 up 9:35, 2 users, load average: 0.11, 0.24, 0.31 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-04-07 21:23:45 CEST Universal time: Sun 2024-04-07 19:23:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** rtwl /home/rtwl rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.2G 1.4G 1.2M 495M 1.8G Swap: 104M 0B 104M Total: 4.1G 2.2G 1.5G 3792 M total memory 2058 M used memory 2101 M active memory 242 M inactive memory 1332 M free memory 51 M buffer memory 421 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 15G 7.4G 6.0G 56% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 63M 448M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 7 11:48:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=baa0be65-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Apr 7 11:48:30 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none. [Sun Apr 7 11:48:32 2024] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 609M /var/ 203M /var/cache 197M /var/cache/apt 164M /var/lib 141M /var/log/journal/347b9e5236b042cab12c17eb2f4c9517 Archived and active journals take up 140.1M in the file system. /opt/iobroker/backups: 1.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 968M /opt/iobroker/iobroker-data/history 233M /opt/iobroker/iobroker-data/files 99M /opt/iobroker/iobroker-data/backup-objects 58M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 39M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 30M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.1 /usr/bin/node v18.20.1 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.1-1nodesource1 Candidate: 18.20.1-1nodesource1 Version table: *** 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detectedLangfassung leider zu lang (zu viele Zeichen) hier der erste Teil.
Jetzt kommt noch der Fehlerauszug vom Teil: Errors in npm tree:-Peter
-
@codierknecht sagte in javascript startet nicht mehr:
Zeig mal die Langfassung von iob diag
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 21:23:45 up 9:35, 2 users, load average: 0.11, 0.24, 0.31 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-04-07 21:23:45 CEST Universal time: Sun 2024-04-07 19:23:45 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** rtwl /home/rtwl rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.2G 1.4G 1.2M 495M 1.8G Swap: 104M 0B 104M Total: 4.1G 2.2G 1.5G 3792 M total memory 2058 M used memory 2101 M active memory 242 M inactive memory 1332 M free memory 51 M buffer memory 421 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 15G 7.4G 6.0G 56% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 63M 448M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 7 11:48:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=baa0be65-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Apr 7 11:48:30 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none. [Sun Apr 7 11:48:32 2024] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 609M /var/ 203M /var/cache 197M /var/cache/apt 164M /var/lib 141M /var/log/journal/347b9e5236b042cab12c17eb2f4c9517 Archived and active journals take up 140.1M in the file system. /opt/iobroker/backups: 1.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 968M /opt/iobroker/iobroker-data/history 233M /opt/iobroker/iobroker-data/files 99M /opt/iobroker/iobroker-data/backup-objects 58M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 39M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 30M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.1 /usr/bin/node v18.20.1 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.1-1nodesource1 Candidate: 18.20.1-1nodesource1 Version table: *** 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detectedLangfassung leider zu lang (zu viele Zeichen) hier der erste Teil.
Jetzt kommt noch der Fehlerauszug vom Teil: Errors in npm tree: -
auch der "Errors in npm tree" hat mehr als 100.000 Zeichen.
hier die txt Datei.npm ERR! invalid: @types/node@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/node npm ERR! invalid: jsonata@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jsonata npm ERR! invalid: jszip@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jszip npm ERR! invalid: moment@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/moment npm ERR! invalid: node-inspect@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-inspect npm ERR! invalid: node-schedule@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-schedule npm ERR! invalid: request@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/request npm ERR! invalid: semver@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/semver ...Spiel dein Backup ein.
-
npm ERR! invalid: @types/node@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/node npm ERR! invalid: jsonata@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jsonata npm ERR! invalid: jszip@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jszip npm ERR! invalid: moment@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/moment npm ERR! invalid: node-inspect@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-inspect npm ERR! invalid: node-schedule@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-schedule npm ERR! invalid: request@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/request npm ERR! invalid: semver@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/semver ...Spiel dein Backup ein.
@thomas-braun
Hab jetzt mal deinen ersten Vorschlag gemacht und den Javascript Adapter neu installiert - sieht so aus, als ob das funktioniert hat.
Im Log tauchen seitdem keine Fehlermeldungen mehr auf. -
npm ERR! invalid: @types/node@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/node npm ERR! invalid: jsonata@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jsonata npm ERR! invalid: jszip@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/jszip npm ERR! invalid: moment@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/moment npm ERR! invalid: node-inspect@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-inspect npm ERR! invalid: node-schedule@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/node-schedule npm ERR! invalid: request@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/request npm ERR! invalid: semver@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/semver ...Spiel dein Backup ein.
-
@thomas-braun
soll ich trotzdem das Update einspielen? oder erstmal weiter beobachten?Ich hab doch einen Fehler, aber was bedeutet das?
javascript.0 2024-04-07 21:38:54.596 error deprecated request@2.88.2: request has been deprecated, see http ://github.com/request/request/issues/3142 javascript.0 2024-04-07 21:38:54.591 error npm WARN javascript.0 2024-04-07 21:38:54.480 error WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. javascript.0 2024-04-07 21:38:54.477 error npm javascript.0 2024-04-07 21:38:54.373 error WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained. javascript.0 2024-04-07 21:38:54.372 error npm javascript.0 2024-04-07 21:38:54.150 error npm WARN deprecated har-validator@5.1.5: this library is no longer supported-Peter
-
Ich hab doch einen Fehler, aber was bedeutet das?
javascript.0 2024-04-07 21:38:54.596 error deprecated request@2.88.2: request has been deprecated, see http ://github.com/request/request/issues/3142 javascript.0 2024-04-07 21:38:54.591 error npm WARN javascript.0 2024-04-07 21:38:54.480 error WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. javascript.0 2024-04-07 21:38:54.477 error npm javascript.0 2024-04-07 21:38:54.373 error WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained. javascript.0 2024-04-07 21:38:54.372 error npm javascript.0 2024-04-07 21:38:54.150 error npm WARN deprecated har-validator@5.1.5: this library is no longer supportedNee, das sind nur 'Warnings'.
Die vier Module werden nicht mehr richtig unterstützt und sollten nach Möglichkeit durch anderes ersetzt werden. -
Nee, das sind nur 'Warnings'.
Die vier Module werden nicht mehr richtig unterstützt und sollten nach Möglichkeit durch anderes ersetzt werden.@thomas-braun
okay danke. das beruhigt.kannst du hier in der aktuellen langfassung von
iob diagerkennen, ob es noch weitere Baustellen gibt? Es tauchen nämlich noch ein paar "npm errors" auf:Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 21:50:13 up 10:01, 2 users, load average: 0.69, 0.84, 1.03 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-04-07 21:50:14 CEST Universal time: Sun 2024-04-07 19:50:14 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** rtwl /home/rtwl rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.5G 1.1G 1.2M 533M 1.5G Swap: 104M 0B 104M Total: 4.1G 2.5G 1.2G 3792 M total memory 2356 M used memory 2349 M active memory 307 M inactive memory 1003 M free memory 70 M buffer memory 438 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 15G 7.7G 5.8G 58% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 63M 448M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 7 11:48:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=baa0be65-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Apr 7 11:48:30 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none. [Sun Apr 7 11:48:32 2024] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 609M /var/ 203M /var/cache 197M /var/cache/apt 164M /var/lib 141M /var/log/journal/347b9e5236b042cab12c17eb2f4c9517 Archived and active journals take up 140.1M in the file system. /opt/iobroker/backups: 1.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 968M /opt/iobroker/iobroker-data/history 233M /opt/iobroker/iobroker-data/files 99M /opt/iobroker/iobroker-data/backup-objects 58M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.1 /usr/bin/node v18.20.1 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.1-1nodesource1 Candidate: 18.20.1-1nodesource1 Version table: *** 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! extraneous: @abandonware/bluetooth-hci-socket@0.5.3-10 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket npm ERR! extraneous: @mapbox/node-pre-gyp@1.0.11 /opt/iobroker/node_modules/@mapbox/node-pre-gyp npm ERR! extraneous: @types/caseless@0.12.5 /opt/iobroker/node_modules/@types/caseless npm ERR! extraneous: @types/request@2.48.12 /opt/iobroker/node_modules/@types/request npm ERR! extraneous: @types/tough-cookie@4.0.5 /opt/iobroker/node_modules/@types/tough-cookie npm ERR! extraneous: abbrev@1.1.1 /opt/iobroker/node_modules/abbrev npm ERR! extraneous: aproba@2.0.0 /opt/iobroker/node_modules/aproba npm ERR! extraneous: are-we-there-yet@2.0.0 /opt/iobroker/node_modules/are-we-there-yet npm ERR! extraneous: color-support@1.1.3 /opt/iobroker/node_modules/color-support npm ERR! extraneous: console-control-strings@1.1.0 /opt/iobroker/node_modules/console-control-strings npm ERR! extraneous: delegates@1.0.0 /opt/iobroker/node_modules/delegates npm ERR! extraneous: detect-libc@2.0.2 /opt/iobroker/node_modules/detect-libc npm ERR! extraneous: gauge@3.0.2 /opt/iobroker/node_modules/gauge npm ERR! extraneous: has-unicode@2.0.1 /opt/iobroker/node_modules/has-unicode npm ERR! extraneous: node-addon-api@4.3.0 /opt/iobroker/node_modules/node-addon-api npm ERR! extraneous: node-gyp-build@4.7.1 /opt/iobroker/node_modules/node-gyp-build npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: nopt@5.0.0 /opt/iobroker/node_modules/nopt npm ERR! extraneous: npmlog@5.0.1 /opt/iobroker/node_modules/npmlog npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: set-blocking@2.0.0 /opt/iobroker/node_modules/set-blocking npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: usb@1.9.2 /opt/iobroker/node_modules/usb npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! extraneous: wide-align@1.1.5 /opt/iobroker/node_modules/wide-align npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/debug npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/ms npm ERR! extraneous: agent-base@6.0.2 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/agent-base npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/debug npm ERR! extraneous: https-proxy-agent@5.0.1 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/https-proxy-agent npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/ms npm ERR! extraneous: form-data@2.5.1 /opt/iobroker/node_modules/@types/request/node_modules/form-data npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/virtual-tsc/node_modules/debug npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/virtual-tsc/node_modules/ms npm ERR! invalid: form-data@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/form-data npm ERR! A complete log of this run can be found in: /home/rtwl/.npm/_logs/2024-04-07T19_50_23_555Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.0.0 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-timer-vis.0 : alexa-timer-vis : smarthome - enabled + system.adapter.alexa2.0 : alexa2 : smarthome - enabled system.adapter.alias-manager.0 : alias-manager : smarthome - disabled + system.adapter.backitup.0 : backitup : smarthome - enabled + system.adapter.bring.0 : bring : smarthome - enabled + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.daswetter.0 : daswetter : smarthome - enabled system.adapter.discovery.0 : discovery : smarthome - disabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.flot.0 : flot : smarthome - disabled + system.adapter.fronius.0 : fronius : smarthome - enabled + system.adapter.harmony.0 : harmony : smarthome - enabled + system.adapter.history.0 : history : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.ical.1 : ical : smarthome - enabled + system.adapter.iot.0 : iot : smarthome - enabled + system.adapter.javascript.0 : javascript : smarthome - enabled + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : smarthome - enabled + system.adapter.onkyo.0 : onkyo : smarthome - enabled + system.adapter.operating-hours.0 : operating-hours : smarthome - enabled + system.adapter.pi-hole.0 : pi-hole : smarthome - enabled + system.adapter.pushover.0 : pushover : smarthome - enabled + system.adapter.pvforecast.0 : pvforecast : smarthome - enabled + system.adapter.radar2.0 : radar2 : smarthome - enabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : smarthome - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : smarthome - enabled + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled system.adapter.uv-protect.0 : uv-protect : smarthome - enabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - disabled system.adapter.vis.0 : vis : smarthome - enabled + system.adapter.weather-warnings.0 : weather-warnings : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-timer-vis": 0.3.0 , installed 0.3.0 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "harmony" : 1.3.0 , installed 1.3.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 8.0.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "operating-hours": 1.0.6 , installed 1.0.6 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "radar2" : 2.1.0 , installed 2.1.0 Adapter "shelly" : 6.8.0 , installed 6.8.0 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.1 , installed 6.6.1 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "uv-protect" : 0.6.0 , installed 0.6.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.6.7 , installed 0.6.7 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "ws" : 2.5.11 , installed 2.5.11 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 12395 States: 10907 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5797 693/sshd: /usr/sbin tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 7347 906/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 4798 686/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 6218 686/iobroker.js-con tcp6 0 0 :::61991 :::* LISTEN 1001 6664 1154/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 5799 693/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 8001 1296/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 6282 778/io.admin.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 6665 1154/io.harmony.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 4690 532/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 7519 976/io.shelly.0 udp 0 0 0.0.0.0:32832 0.0.0.0:* 104 4692 532/avahi-daemon: r udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 7435 943/io.radar2.0 udp6 0 0 :::5353 :::* 104 4691 532/avahi-daemon: r udp6 0 0 :::60874 :::* 104 4693 532/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-04-07 21:39:13.968 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Geräte entkalken: Prüfungsergebnis: Fällig seit 12 Tagen 2024-04-07 21:39:13.972 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Wasserfilter spülen: Script wurde neu gestartet. Ein Timer-Startdatum ist vorhanden, also wird nur aktualisiert. 2024-04-07 21:39:13.973 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Wasserfilter spülen: Prüfungsergebnis: Fällig seit 71 Tagen 2024-04-07 21:39:13.978 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Fusselfilter Waschmaschine: Script wurde neu gestartet. Ein Timer-Startdatum ist vorhanden, also wird nur aktualisiert. 2024-04-07 21:39:13.980 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Fusselfilter Waschmaschine: Prüfungsergebnis: Fällig seit 12 Tagen 2024-04-07 21:39:14.015 - info: javascript.0 (75060) script.js.LMair.test_marker_abrufen: 0 2024-04-07 21:39:14.081 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Strom.kWh_Erzeugung 2024-04-07 21:39:14.133 - info: javascript.0 (75060) script.js.Haussteuerung.Strom.kWh_Erzeugung: registered 0 subscriptions, 5 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.134 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Strom.kWh_Gesamtverbrauch 2024-04-07 21:39:14.206 - info: javascript.0 (75060) script.js.Haussteuerung.Strom.kWh_Gesamtverbrauch: registered 0 subscriptions, 5 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.350 - info: javascript.0 (75060) script.js.LMair.marker1: 200 2024-04-07 21:39:14.482 - info: javascript.0 (75060) Start javascript script.js.LMair.marker 2024-04-07 21:39:14.494 - info: javascript.0 (75060) script.js.LMair.marker: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.495 - info: javascript.0 (75060) Start javascript script.js.LMair.weather_json 2024-04-07 21:39:14.502 - info: javascript.0 (75060) script.js.LMair.weather_json: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.627 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Fernseher.ambilight 2024-04-07 21:39:14.634 - info: javascript.0 (75060) script.js.Haussteuerung.Fernseher.ambilight: registered 1 subscription, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:15.404 - info: javascript.0 (75060) script.js.Haussteuerung.Lüftungsempfehlungs.Lüftungsempfehlung: Subscriptions angelegt: 20 2024-04-07 21:39:16.067 - error: javascript.0 (75060) script.js.LMair.marker1: timeout of 2000ms exceeded 2024-04-07 21:39:16.067 - info: javascript.0 (75060) script.js.LMair.marker1: undefined 2024-04-07 21:40:00.352 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:00.393 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:00.426 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:01.653 - info: javascript.0 (75060) script.js.Haussteuerung.Lüftungsempfehlungs.Liste_Lueftungsempfehlung: Badezimmer 2024-04-07 21:50:24.476 - warn: zigbee.0 (1038) DeviceAvailability:Stopping to ping 0x000b57fffe2a31ca TRADFRI bulb E27 WS�opal 980lm after 4 ping attempts-Peter
-
@thomas-braun
okay danke. das beruhigt.kannst du hier in der aktuellen langfassung von
iob diagerkennen, ob es noch weitere Baustellen gibt? Es tauchen nämlich noch ein paar "npm errors" auf:Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.20+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 21:50:13 up 10:01, 2 users, load average: 0.69, 0.84, 1.03 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-04-07 21:50:14 CEST Universal time: Sun 2024-04-07 19:50:14 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** rtwl /home/rtwl rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.5G 1.1G 1.2M 533M 1.5G Swap: 104M 0B 104M Total: 4.1G 2.5G 1.2G 3792 M total memory 2356 M used memory 2349 M active memory 307 M inactive memory 1003 M free memory 70 M buffer memory 438 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 15G 7.7G 5.8G 58% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 63M 448M 13% /boot/firmware tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Apr 7 11:48:28 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=baa0be65-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Apr 7 11:48:30 2024] EXT4-fs (mmcblk0p2): mounted filesystem 3b614a3f-4a65-4480-876a-8a998e01ac9b ro with ordered data mode. Quota mode: none. [Sun Apr 7 11:48:32 2024] EXT4-fs (mmcblk0p2): re-mounted 3b614a3f-4a65-4480-876a-8a998e01ac9b r/w. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 609M /var/ 203M /var/cache 197M /var/cache/apt 164M /var/lib 141M /var/log/journal/347b9e5236b042cab12c17eb2f4c9517 Archived and active journals take up 140.1M in the file system. /opt/iobroker/backups: 1.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4G /opt/iobroker/iobroker-data/ 968M /opt/iobroker/iobroker-data/history 233M /opt/iobroker/iobroker-data/files 99M /opt/iobroker/iobroker-data/backup-objects 58M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/objects.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.1 /usr/bin/node v18.20.1 /usr/bin/npm 10.5.0 /usr/bin/npx 10.5.0 /usr/bin/corepack 0.25.2 nodejs: Installed: 18.20.1-1nodesource1 Candidate: 18.20.1-1nodesource1 Version table: *** 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! extraneous: @abandonware/bluetooth-hci-socket@0.5.3-10 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket npm ERR! extraneous: @mapbox/node-pre-gyp@1.0.11 /opt/iobroker/node_modules/@mapbox/node-pre-gyp npm ERR! extraneous: @types/caseless@0.12.5 /opt/iobroker/node_modules/@types/caseless npm ERR! extraneous: @types/request@2.48.12 /opt/iobroker/node_modules/@types/request npm ERR! extraneous: @types/tough-cookie@4.0.5 /opt/iobroker/node_modules/@types/tough-cookie npm ERR! extraneous: abbrev@1.1.1 /opt/iobroker/node_modules/abbrev npm ERR! extraneous: aproba@2.0.0 /opt/iobroker/node_modules/aproba npm ERR! extraneous: are-we-there-yet@2.0.0 /opt/iobroker/node_modules/are-we-there-yet npm ERR! extraneous: color-support@1.1.3 /opt/iobroker/node_modules/color-support npm ERR! extraneous: console-control-strings@1.1.0 /opt/iobroker/node_modules/console-control-strings npm ERR! extraneous: delegates@1.0.0 /opt/iobroker/node_modules/delegates npm ERR! extraneous: detect-libc@2.0.2 /opt/iobroker/node_modules/detect-libc npm ERR! extraneous: gauge@3.0.2 /opt/iobroker/node_modules/gauge npm ERR! extraneous: has-unicode@2.0.1 /opt/iobroker/node_modules/has-unicode npm ERR! extraneous: node-addon-api@4.3.0 /opt/iobroker/node_modules/node-addon-api npm ERR! extraneous: node-gyp-build@4.7.1 /opt/iobroker/node_modules/node-gyp-build npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: nopt@5.0.0 /opt/iobroker/node_modules/nopt npm ERR! extraneous: npmlog@5.0.1 /opt/iobroker/node_modules/npmlog npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: set-blocking@2.0.0 /opt/iobroker/node_modules/set-blocking npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: usb@1.9.2 /opt/iobroker/node_modules/usb npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! extraneous: wide-align@1.1.5 /opt/iobroker/node_modules/wide-align npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/debug npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/node_modules/ms npm ERR! extraneous: agent-base@6.0.2 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/agent-base npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/debug npm ERR! extraneous: https-proxy-agent@5.0.1 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/https-proxy-agent npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@mapbox/node-pre-gyp/node_modules/ms npm ERR! extraneous: form-data@2.5.1 /opt/iobroker/node_modules/@types/request/node_modules/form-data npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/virtual-tsc/node_modules/debug npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/virtual-tsc/node_modules/ms npm ERR! invalid: form-data@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/form-data npm ERR! A complete log of this run can be found in: /home/rtwl/.npm/_logs/2024-04-07T19_50_23_555Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.0.0 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-timer-vis.0 : alexa-timer-vis : smarthome - enabled + system.adapter.alexa2.0 : alexa2 : smarthome - enabled system.adapter.alias-manager.0 : alias-manager : smarthome - disabled + system.adapter.backitup.0 : backitup : smarthome - enabled + system.adapter.bring.0 : bring : smarthome - enabled + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.daswetter.0 : daswetter : smarthome - enabled system.adapter.discovery.0 : discovery : smarthome - disabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.flot.0 : flot : smarthome - disabled + system.adapter.fronius.0 : fronius : smarthome - enabled + system.adapter.harmony.0 : harmony : smarthome - enabled + system.adapter.history.0 : history : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.ical.1 : ical : smarthome - enabled + system.adapter.iot.0 : iot : smarthome - enabled + system.adapter.javascript.0 : javascript : smarthome - enabled + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : smarthome - enabled + system.adapter.onkyo.0 : onkyo : smarthome - enabled + system.adapter.operating-hours.0 : operating-hours : smarthome - enabled + system.adapter.pi-hole.0 : pi-hole : smarthome - enabled + system.adapter.pushover.0 : pushover : smarthome - enabled + system.adapter.pvforecast.0 : pvforecast : smarthome - enabled + system.adapter.radar2.0 : radar2 : smarthome - enabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : smarthome - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : smarthome - enabled + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled system.adapter.uv-protect.0 : uv-protect : smarthome - enabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - disabled system.adapter.vis.0 : vis : smarthome - enabled + system.adapter.weather-warnings.0 : weather-warnings : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230804163324-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-timer-vis": 0.3.0 , installed 0.3.0 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "harmony" : 1.3.0 , installed 1.3.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 8.0.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "operating-hours": 1.0.6 , installed 1.0.6 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "radar2" : 2.1.0 , installed 2.1.0 Adapter "shelly" : 6.8.0 , installed 6.8.0 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.1 , installed 6.6.1 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "uv-protect" : 0.6.0 , installed 0.6.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weather-warnings": 0.6.7 , installed 0.6.7 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "ws" : 2.5.11 , installed 2.5.11 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 12395 States: 10907 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5797 693/sshd: /usr/sbin tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 7347 906/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 4798 686/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 6218 686/iobroker.js-con tcp6 0 0 :::61991 :::* LISTEN 1001 6664 1154/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 5799 693/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 8001 1296/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 6282 778/io.admin.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 6665 1154/io.harmony.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 4690 532/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 7519 976/io.shelly.0 udp 0 0 0.0.0.0:32832 0.0.0.0:* 104 4692 532/avahi-daemon: r udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 7435 943/io.radar2.0 udp6 0 0 :::5353 :::* 104 4691 532/avahi-daemon: r udp6 0 0 :::60874 :::* 104 4693 532/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-04-07 21:39:13.968 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Geräte entkalken: Prüfungsergebnis: Fällig seit 12 Tagen 2024-04-07 21:39:13.972 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Wasserfilter spülen: Script wurde neu gestartet. Ein Timer-Startdatum ist vorhanden, also wird nur aktualisiert. 2024-04-07 21:39:13.973 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Wasserfilter spülen: Prüfungsergebnis: Fällig seit 71 Tagen 2024-04-07 21:39:13.978 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Fusselfilter Waschmaschine: Script wurde neu gestartet. Ein Timer-Startdatum ist vorhanden, also wird nur aktualisiert. 2024-04-07 21:39:13.980 - info: javascript.0 (75060) script.js.Haussteuerung.Timer: Timer Fusselfilter Waschmaschine: Prüfungsergebnis: Fällig seit 12 Tagen 2024-04-07 21:39:14.015 - info: javascript.0 (75060) script.js.LMair.test_marker_abrufen: 0 2024-04-07 21:39:14.081 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Strom.kWh_Erzeugung 2024-04-07 21:39:14.133 - info: javascript.0 (75060) script.js.Haussteuerung.Strom.kWh_Erzeugung: registered 0 subscriptions, 5 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.134 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Strom.kWh_Gesamtverbrauch 2024-04-07 21:39:14.206 - info: javascript.0 (75060) script.js.Haussteuerung.Strom.kWh_Gesamtverbrauch: registered 0 subscriptions, 5 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.350 - info: javascript.0 (75060) script.js.LMair.marker1: 200 2024-04-07 21:39:14.482 - info: javascript.0 (75060) Start javascript script.js.LMair.marker 2024-04-07 21:39:14.494 - info: javascript.0 (75060) script.js.LMair.marker: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.495 - info: javascript.0 (75060) Start javascript script.js.LMair.weather_json 2024-04-07 21:39:14.502 - info: javascript.0 (75060) script.js.LMair.weather_json: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:14.627 - info: javascript.0 (75060) Start javascript script.js.Haussteuerung.Fernseher.ambilight 2024-04-07 21:39:14.634 - info: javascript.0 (75060) script.js.Haussteuerung.Fernseher.ambilight: registered 1 subscription, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2024-04-07 21:39:15.404 - info: javascript.0 (75060) script.js.Haussteuerung.Lüftungsempfehlungs.Lüftungsempfehlung: Subscriptions angelegt: 20 2024-04-07 21:39:16.067 - error: javascript.0 (75060) script.js.LMair.marker1: timeout of 2000ms exceeded 2024-04-07 21:39:16.067 - info: javascript.0 (75060) script.js.LMair.marker1: undefined 2024-04-07 21:40:00.352 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:00.393 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:00.426 - info: javascript.0 (75060) script.js.VIS.Liste_Lampen: Bodenbeleuchtung<br>Bücherregal<br>Nachtlicht Linda<br>Vorhang 2024-04-07 21:40:01.653 - info: javascript.0 (75060) script.js.Haussteuerung.Lüftungsempfehlungs.Liste_Lueftungsempfehlung: Badezimmer 2024-04-07 21:50:24.476 - warn: zigbee.0 (1038) DeviceAvailability:Stopping to ping 0x000b57fffe2a31ca TRADFRI bulb E27 WS�opal 980lm after 4 ping attempts@rtwl sagte in javascript startet nicht mehr:
npm ERR! invalid: form-data@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/form-data
Der klemmt noch. Ist das ein Zusätzliches Modul im Adapter?
-
@rtwl sagte in javascript startet nicht mehr:
npm ERR! invalid: form-data@ /opt/iobroker/node_modules/iobroker.javascript/node_modules/form-data
Der klemmt noch. Ist das ein Zusätzliches Modul im Adapter?
@thomas-braun
Ehrlichgesagt, keine Ahnung was das ist.Als ich soeben keine Blocklys mehr speichern konnte dachte ich mir es würde
iob stop sudo reboothelfen. Doch leider bin ich jetzt wieder am Anfang. Der Javascript Adapter bleibt Rot. 😥
Auch die Log Meldungen (siehe erster Post) sind wieder alle 30 Sek vorhanden.Hast du noch eine Idee, oder bleibt es mir nicht erspart neu aufzusetzen?
-Peter
-
@thomas-braun
Ehrlichgesagt, keine Ahnung was das ist.Als ich soeben keine Blocklys mehr speichern konnte dachte ich mir es würde
iob stop sudo reboothelfen. Doch leider bin ich jetzt wieder am Anfang. Der Javascript Adapter bleibt Rot. 😥
Auch die Log Meldungen (siehe erster Post) sind wieder alle 30 Sek vorhanden.Hast du noch eine Idee, oder bleibt es mir nicht erspart neu aufzusetzen?
-
@thomas-braun
hab mich für die neue Installation auf einer neuen SD Karte entschieden. Dort kommt dann das Backup drauf. Somit sollte ich dann auf der sicheren Seite sein. Nicht, dass dann doch noch irgendwo Fehler auftauchen - hab ja den Raspi heute morgen einfach Stromlos gemacht.Danke wiedermal für deine Hilfe 👍
-
@rtwl sagte in javascript startet nicht mehr:
der iobroker (Raspberry/SD Karte) war zwar per Ping ansprechbar. aber weder der iobroker konnte geöffnet werden auch per ssh hatte ich keinen Zugriff mehr.
3 Tage später mit dem frisch installiertem iobroker wieder das gleiche Problem...
Ping erfolgreich - per ssh aber keinen Zugriff mehr - es kommt keine Passwortanforderung nach der ssh Eingabe.
Kann ich außer innerlich durchdrehen noch irgendwas tun?
Warum passiert das immer so unvorhergesehen?-Peter
-
@rtwl sagte in javascript startet nicht mehr:
der iobroker (Raspberry/SD Karte) war zwar per Ping ansprechbar. aber weder der iobroker konnte geöffnet werden auch per ssh hatte ich keinen Zugriff mehr.
3 Tage später mit dem frisch installiertem iobroker wieder das gleiche Problem...
Ping erfolgreich - per ssh aber keinen Zugriff mehr - es kommt keine Passwortanforderung nach der ssh Eingabe.
Kann ich außer innerlich durchdrehen noch irgendwas tun?
Warum passiert das immer so unvorhergesehen?@rtwl sagte in javascript startet nicht mehr:
Kann ich außer innerlich durchdrehen noch irgendwas tun?
iob diaganschauen.
-
@rtwl sagte in javascript startet nicht mehr:
Kann ich außer innerlich durchdrehen noch irgendwas tun?
iob diaganschauen.
@thomas-braun soweit komm ich ja gar nicht. Hab keinen Zugriff per ssh. Der iobroker ist ja "abgestürzt"
-
@rtwl sagte in javascript startet nicht mehr:
Kann ich außer innerlich durchdrehen noch irgendwas tun?
iob diaganschauen.
-
@thomas-braun
es gibt nicht zufällig einen http request den ich an die ip-adresse des Raspberry schicken kann um iobroker neu zu starten oder sowas in der Art?Du kommst ja wohl nicht drauf.
Mit lokal angeklemmter Tastatur:
https://wiki.ubuntuusers.de/Magic_SysRQ/ -
Du kommst ja wohl nicht drauf.
Mit lokal angeklemmter Tastatur:
https://wiki.ubuntuusers.de/Magic_SysRQ/@thomas-braun
leider hab ich keinen mini-hdmi adapter für den Raspi.
aber meinst du es würde funktionieren eine Tastatur anzuschließen und dannZitat der Website: "hierfür wird die ganze Zeit Alt + Druck gedrückt gehalten und nacheinander die Tasten R + E + I + S + U + B betätigt."?
-Peter
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden551
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge