Jarvis Adapter lässt sich nicht Installieren

Glasfaser

Hast du das gemacht !?

@glasfaser sagte in Jarvis Adapter lässt sich nicht Installieren:

@schweiz

Ich habe keinen blassen Schimmer , warum der immer sich bei Dir zerschießt !
cd /opt/iobroker
npm cache clean --force 
sudo -H -u iobroker npm install iobroker.js-controller

Schweiz

@glasfaser
ja, hast du ja geschrieben, beim ersten mal ging ja Alexa2 über console mit debug, da hatte ich ja hoffnung...

soll ich nochmal machen?

MFG Schweizer

Glasfaser

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

soll ich nochmal machen?

ja

und danach

sudo reboot

Thomas Braun

@schweiz

Pending Updates: 10

sudo apt update 
sudo apt full-upgrade
sudo reboot

Dann weiter forschen.

Schweiz

@glasfaser
der bleibt jetzt hängen


john@raspberrypi:~ $ cd /opt/iobroker
john@raspberrypi:/opt/iobroker $ iob stop
john@raspberrypi:/opt/iobroker $ npm cache clean --force
npm WARN using --force Recommended protections disabled.
john@raspberrypi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller
(⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂⠂) ⠏ idealTree:iobroker: sill idealTree buildDeps

sudo apt update 

sudo apt full-upgrade

Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Paketaktualisierung (Upgrade) wird berechnet… Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
  firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree
  firmware-realtek kms++-utils libkms++0 raspberrypi-net-mods raspi-config
  rpi-eeprom
10 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 73,3 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 9.447 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://archive.raspberrypi.com/debian bookworm/main arm64 firmware-ather                                                                                                                     os all 1:20230210-5+rpt3 [16,8 MB]
Holen:2 http://archive.raspberrypi.com/debian bookworm/main arm64 firmware-brcm8                                                                                                                     0211 all 1:20230210-5+rpt3 [5.852 kB]
Holen:3 http://archive.raspberrypi.com/debian bookworm/main arm64 firmware-liber                                                                                                                     tas all 1:20230210-5+rpt3 [31,2 MB]
Holen:4 http://archive.raspberrypi.com/debian bookworm/main arm64 firmware-misc-                                                                                                                     nonfree all 1:20230210-5+rpt3 [13,0 MB]
Holen:5 http://archive.raspberrypi.com/debian bookworm/main arm64 firmware-realt                                                                                                                     ek all 1:20230210-5+rpt3 [1.492 kB]
Holen:6 http://archive.raspberrypi.com/debian bookworm/main arm64 libkms++0 arm6                                                                                                                     4 0~git20231115~065257+9ae90ce-1 [75,2 kB]
Holen:7 http://archive.raspberrypi.com/debian bookworm/main arm64 kms++-utils ar                                                                                                                     m64 0~git20231115~065257+9ae90ce-1 [81,9 kB]
Holen:8 http://archive.raspberrypi.com/debian bookworm/main arm64 raspi-config a                                                                                                                     ll 20240108 [29,7 kB]
Holen:9 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-ne                                                                                                                     t-mods all 1.4.1 [2.180 B]
Holen:10 http://archive.raspberrypi.com/debian bookworm/main arm64 rpi-eeprom al                                                                                                                     l 21.1-1 [4.651 kB]
Es wurden 73,3 MB in 28 s geholt (2.627 kB/s).
Changelogs werden gelesen... Fertig
(Lese Datenbank ... 109167 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../0-firmware-atheros_1%3a20230210-5+rpt3_all.de                                                                                                                     b ...
Entpacken von firmware-atheros (1:20230210-5+rpt3) über (1:20230210-5+rpt2) ...
Vorbereitung zum Entpacken von .../1-firmware-brcm80211_1%3a20230210-5+rpt3_all.                                                                                                                     deb ...
Entpacken von firmware-brcm80211 (1:20230210-5+rpt3) über (1:20230210-5+rpt2) ..                                                                                                                     .
Vorbereitung zum Entpacken von .../2-firmware-libertas_1%3a20230210-5+rpt3_all.d                                                                                                                     eb ...
Entpacken von firmware-libertas (1:20230210-5+rpt3) über (1:20230210-5+rpt2) ...
Vorbereitung zum Entpacken von .../3-firmware-misc-nonfree_1%3a20230210-5+rpt3_a                                                                                                                     ll.deb ...
Entpacken von firmware-misc-nonfree (1:20230210-5+rpt3) über (1:20230210-5+rpt2)                                                                                                                      ...
Vorbereitung zum Entpacken von .../4-firmware-realtek_1%3a20230210-5+rpt3_all.de                                                                                                                     b ...
Entpacken von firmware-realtek (1:20230210-5+rpt3) über (1:20230210-5+rpt2) ...
Vorbereitung zum Entpacken von .../5-libkms++0_0~git20231115~065257+9ae90ce-1_ar                                                                                                                     m64.deb ...
Entpacken von libkms++0:arm64 (0~git20231115~065257+9ae90ce-1) über (0~git202309                                                                                                                     30~162059+b91affd-1) ...
Vorbereitung zum Entpacken von .../6-kms++-utils_0~git20231115~065257+9ae90ce-1_                                                                                                                     arm64.deb ...
Entpacken von kms++-utils (0~git20231115~065257+9ae90ce-1) über (0~git20230930~1                                                                                                                     62059+b91affd-1) ...
Vorbereitung zum Entpacken von .../7-raspi-config_20240108_all.deb ...
Entpacken von raspi-config (20240108) über (20231216) ...
Vorbereitung zum Entpacken von .../8-raspberrypi-net-mods_1.4.1_all.deb ...
Entpacken von raspberrypi-net-mods (1.4.1) über (1.4.0) ...
Vorbereitung zum Entpacken von .../9-rpi-eeprom_21.1-1_all.deb ...
Entpacken von rpi-eeprom (21.1-1) über (20.5-1) ...
firmware-atheros (1:20230210-5+rpt3) wird eingerichtet ...
firmware-misc-nonfree (1:20230210-5+rpt3) wird eingerichtet ...
libkms++0:arm64 (0~git20231115~065257+9ae90ce-1) wird eingerichtet ...
firmware-brcm80211 (1:20230210-5+rpt3) wird eingerichtet ...
firmware-realtek (1:20230210-5+rpt3) wird eingerichtet ...
firmware-libertas (1:20230210-5+rpt3) wird eingerichtet ...
rpi-eeprom (21.1-1) wird eingerichtet ...
raspi-config (20240108) wird eingerichtet ...
kms++-utils (0~git20231115~065257+9ae90ce-1) wird eingerichtet ...
raspberrypi-net-mods (1.4.1) wird eingerichtet ...
Neue Version der Konfigurationsdatei /etc/profile.d/wifi-check.sh wird installie                                                                                                                     rt ...
Trigger für man-db (2.11.2-2) werden verarbeitet ...
Trigger für libc-bin (2.36-9+rpt2+deb12u3) werden verarbeitet ...
Trigger für initramfs-tools (0.142) werden verarbeitet ...
update-initramfs: Generating /boot/initrd.img-6.1.0-rpi7-rpi-v8
update-initramfs: Generating /boot/initrd.img-6.1.0-rpi7-rpi-2712

sudo reboot

iob start

iob diag

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 23:42:03 up 3 min,  2 users,  load average: 0.46, 0.30, 0.12
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2024-01-27 23:42:03 CET
           Universal time: Sat 2024-01-27 22:42:03 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
john
/home/john
john adm dialout cdrom sudo audio video plugdev games users input render netdev                                                                                                                      gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        417M        3.4G        1.3M        271M        3.6G
Swap:           104M          0B        104M
Total:          4.1G        417M        3.5G

         3793 M total memory
          398 M used memory
          418 M active memory
           79 M inactive memory
         3203 M free memory
           16 M buffer memory
          242 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       59G  3.8G   52G   7% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   62M  449M  13% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan 27 23:38:57 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                      snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena                                                                                                                     ble_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:29:88:49 vc_mem.                                                                                                                     mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty                                                                                                                     1 root=PARTUUID=620a9d97-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jan 27 23:39:00 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                      data mode. Quota mode: none.
[Sat Jan 27 23:39:02 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepag                                                                                                                     e=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.3G    /var/
837M    /var/lib
662M    /var/lib/piVCCU3
604M    /var/lib/piVCCU3/rootfs
279M    /var/lib/piVCCU3/rootfs/opt

Archived and active journals take up 117.1M in the file system.

/opt/iobroker/backups:
34M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
297M    /opt/iobroker/iobroker-data/
185M    /opt/iobroker/iobroker-data/files
86M     /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/javascript.admin
49M     /opt/iobroker/iobroker-data/files/telegram-menu.admin

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/files/telegram-menu.admin/build/index.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
18M     /opt/iobroker/iobroker-data/objects.jsonl
13M     /opt/iobroker/iobroker-data/files/telegram-menu.admin/build/index.js
8.8M    /opt/iobroker/iobroker-data/states.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Core adapters versions
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
js-controller:
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
admin:
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0
javascript:

Adapters from github:   0

Adapter State
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Enabled adapters with bindings
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

ioBroker-Repositories
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1137
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
    at Module._load (node:internal/modules/cjs/loader:975:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v18.19.0

Objects and States
Please stand by - This may take a while
Objects:        0
States:         0

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:6 https://apt.pivccu.de/piVCCU stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 10.0.3.1:53             0.0.0.0:*               LISTEN      0          16548      1039/dnsmasq
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15964      994/sshd: /usr/sbin
tcp6       0      0 :::22                   :::*                    LISTEN      0          15966      994/sshd: /usr/sbin
udp        0      0 10.0.3.1:53             0.0.0.0:*                           0          16547      1039/dnsmasq
udp        0      0 0.0.0.0:67              0.0.0.0:*                           0          16544      1039/dnsmasq
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          647        890/dhclient
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13219      512/avahi-daemon: r
udp        0      0 0.0.0.0:38913           0.0.0.0:*                           104        13221      512/avahi-daemon: r
udp6       0      0 :::41539                :::*                                104        13222      512/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        13220      512/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-01-27 23:15:10.525  - info: host.raspberrypi stopInstance system.adapter.viessmannapi.0 send kill signal
2024-01-27 23:15:10.631  - info: hm-rega.0 (2002) terminating
2024-01-27 23:15:10.635  - info: hm-rega.0 (2002) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-27 23:15:10.655  - info: web.0 (2499) terminated http server on port 8082
2024-01-27 23:15:10.656  - info: web.0 (2499) terminating
2024-01-27 23:15:10.659  - info: web.0 (2499) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-27 23:15:10.731  - info: javascript.0 (1832) terminating
2024-01-27 23:15:10.724  - info: telegram.0 (1703) terminating
2024-01-27 23:15:10.729  - info: telegram.0 (1703) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-27 23:15:10.741  - info: hm-rega.0 (2002) terminating
2024-01-27 23:15:10.745  - info: tr-064.0 (2027) terminating
2024-01-27 23:15:10.765  - info: backitup.0 (2186) terminating
2024-01-27 23:15:10.793  - info: discovery.0 (2134) terminating
2024-01-27 23:15:10.795  - info: enigma2.0 (2264) terminating
2024-01-27 23:15:10.797  - info: enigma2.0 (2264) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-27 23:15:10.806  - info: heizoel.0 (2424) terminating
2024-01-27 23:15:10.810  - info: admin.0 (1612) terminating
2024-01-27 23:15:10.813  - info: tankerkoenig.0 (2441) terminating
2024-01-27 23:15:10.830  - info: worx.0 (2457) terminating
2024-01-27 23:15:10.835  - info: weather-warnings.0 (2482) terminating
2024-01-27 23:15:10.842  - info: web.0 (2499) terminating
2024-01-27 23:15:10.860  - info: viessmannapi.0 (2559) terminating
2024-01-27 23:15:10.870  - info: trashschedule.0 (2528) terminating
2024-01-27 23:15:11.119  - info: host.raspberrypi instance system.adapter.tr-064.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-01-27 23:15:11.120  - info: host.raspberrypi instance system.adapter.backitup.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

CCU geht IOB nicht...

Glasfaser

@Schweiz
Gehe mal eine Version runter

sudo -H -u iobroker npm install iobroker.js-controller@5.0.16

Schweiz

@glasfaser sagte in Jarvis Adapter lässt sich nicht Installieren:

sudo -H -u iobroker npm install iobroker.js-controller@5.0.16

geht nicht, klemmt auch am anfang...

MFG Schweizer

Glasfaser · sudo -H -u iobroker npm install iobroker.js-controller@5.0.16

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

geht nicht, klemmt auch am anfang...

Habe ich mir gedacht ... da klemmt eher dein Netzwerk

Schweiz

@glasfaser

ich habe ja die ganze zeit installiert, und es hat alles funktioniert... bis dann plötzlich die Adapter sich nicht Installieren lassen haben...
IOB und CCU haben tadelos funktioniert und mir auch per Telegram und Enigma nachrichten gesendet...

MFG Schweizer

Schweiz

CCU läuft weiter hin, nur IOB nicht

MFG Schweizer

Schweiz

wo speichert der BackupAdapter auf der Karte das Backup?
Dann zieht ich das morgen runter und Insatlliere nochmal...
vorher Teste ich ob ich Adapter installieren kann...

geht ja nicht weiter... sonst besauf mich...

MFG Schweizer

Glasfaser

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

wo speichert der BackupAdapter auf der Karte das Backup?

/opt/iobroker/backups:

34M     /opt/iobroker/backups/

Schweiz

@glasfaser
ok, danke... erst mal... eine gute n8

MFG Schweizer

Schweiz

Also gut...
ich denke ich kann es nun eingrenzen...
Also das erste mal habe ich die Adapter alphabetisch installiert von A-Z dabei war Trashschedule mehr oder weiger einer der letzten Adapter war welche ich Installiert hatte. Der Jarvis war dann der letzte welchen ich Installieren wollte aber nicht ging... Der fehler liegt hier ganz offensichtlich im Trashschedule, da ich nun von Z-A installiert habe. Jetzt habe ich ich den Trashschedule installiert und es geht wider nix, auch nicht nach entfernen des Adapters...

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 18:40:41 up  2:09,  2 users,  load average: 0.29, 0.30, 0.34
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-01-28 18:40:41 CET
           Universal time: Sun 2024-01-28 17:40:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
john
/home/john
john adm dialout cdrom sudo audio video plugdev games users input render netdev                                                                                                                      gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.1G        1.2G        1.2M        1.8G        2.9G
Swap:           104M          0B        104M
Total:          4.1G        1.1G        1.3G

         3793 M total memory
         1006 M used memory
         1081 M active memory
         1295 M inactive memory
         1167 M free memory
           82 M buffer memory
         1613 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       59G  3.5G   52G   7% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Jan 28 16:30:54 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                      snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena                                                                                                                     ble_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:29:88:49 vc_mem.                                                                                                                     mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty                                                                                                                     1 root=PARTUUID=96a04be6-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ie                                                                                                                     ee80211_regdom=DE
[Sun Jan 28 16:30:57 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                      data mode. Quota mode: none.
[Sun Jan 28 16:30:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepag                                                                                                                     e=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
500M    /var/
203M    /var/cache
198M    /var/cache/apt
160M    /var/lib
132M    /var/lib/apt/lists

Archived and active journals take up 36.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
318M    /opt/iobroker/iobroker-data/
310M    /opt/iobroker/iobroker-data/files
155M    /opt/iobroker/iobroker-data/files/vis-2
78M     /opt/iobroker/iobroker-data/files/vis-2/static
77M     /opt/iobroker/iobroker-data/files/vis-2/static/js

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/files/telegram-menu.admin/build/index.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.m                                                                                                                     ap
18M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.e642d05b.js.map
18M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.2b7aff38.js.map
18M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always                                                                                                                      prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa-timer-vis.0        : alexa-timer-vis       : raspberrypi                              - disabled
  system.adapter.alexa2.0                 : alexa2                : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.exchangerates.0          : exchangerates         : raspberrypi                              - disabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              - disabled
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.parcel.0                 : parcel                : raspberrypi                              - disabled
  system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              - disabled
  system.adapter.telegram-menu.0          : telegram-menu         : raspberrypi                              - disabled
  system.adapter.telegram.0               : telegram              : raspberrypi                              - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : raspberrypi                              - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : raspberrypi                              - disabled
  system.adapter.viessmannapi.0           : viessmannapi          : raspberrypi                              - disabled
  system.adapter.vis-2-widgets-gauges.0   : vis-2-widgets-gauges  : raspberrypi                              -  enabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi                              -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : raspberrypi                              -  enabled
  system.adapter.vis-map.0                : vis-map               : raspberrypi                              -  enabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weather-warnings.0       : weather-warnings      : raspberrypi                              - disabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.welcome.0                : welcome               : raspberrypi                              -  enabled, port: 80, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.welcome.0                : welcome               : raspberrypi                              -  enabled, port: 80, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa-timer-vis": 0.3.0  , installed 0.3.0
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "exchangerates": 0.0.14   , installed 0.0.14
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "parcel"       : 0.0.27   , installed 0.0.27
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 3.0.1    , installed 3.0.1
Adapter    "telegram-menu": 1.5.1    , installed 1.5.1
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "viessmannapi" : 2.3.0    , installed 2.3.0
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-2"        : 2.9.11   , installed 2.9.11
Adapter    "vis-2-widgets-gauges": 1.0.2, installed 1.0.2
Adapter    "vis-2-widgets-material": 1.3.17, installed 1.3.17
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "weather-warnings": 0.6.6 , installed 0.6.6
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "welcome"      : 0.1.0    , installed 0.1.0
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.8    , installed 2.5.8

Objects and States
Please stand by - This may take a while
Objects:        668
States:         351

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 16

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       42700      9269/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       42715      9269/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13698      709/sshd: /usr/sbin
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       51994      10190/io.jarvis.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       46305      9445/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       50780      10124/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          13700      709/sshd: /usr/sbin
tcp6       0      0 :::80                   :::*                    LISTEN      1001       50995      10429/io.welcome.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13548      495/avahi-daemon: r
udp        0      0 0.0.0.0:5678            0.0.0.0:*                           1001       50670      9396/io.discovery.0
udp        0      0 0.0.0.0:32949           0.0.0.0:*                           104        13550      495/avahi-daemon: r
udp6       0      0 fe80::e0bd:e062:255:546 :::*                                0          14849      598/NetworkManager
udp6       0      0 fe80::59d9:79d7:153:546 :::*                                0          13730      598/NetworkManager
udp6       0      0 :::5353                 :::*                                104        13549      495/avahi-daemon: r
udp6       0      0 :::51658                :::*                                104        13551      495/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-01-28 18:31:43.989  - error: host.raspberrypi iobroker host.raspberrypi Cannot install iobroker.opi@0.1.2: 1
2024-01-28 18:31:45.025  - info: host.raspberrypi iobroker exit 25
2024-01-28 18:36:52.680  - info: admin.0 (9445) <== Disconnect system.user.admin from ::ffff:192.168.2.116 admin
2024-01-28 18:36:54.372  - info: admin.0 (9445) ==> Connected system.user.admin from ::ffff:192.168.2.116
2024-01-28 18:37:14.246  - info: host.raspberrypi iobroker del trashschedule.0
2024-01-28 18:37:16.428  - info: host.raspberrypi iobroker Delete instance "trashschedule.0"
2024-01-28 18:37:16.478  - info: host.raspberrypi iobroker host.raspberrypi Counted 1 instances of trashschedule.0
2024-01-28 18:37:16.498  - info: host.raspberrypi iobroker host.raspberrypi Counted 9 channels of trashschedule.0
2024-01-28 18:37:16.512  - info: host.raspberrypi iobroker host.raspberrypi Counted 59 states of trashschedule.0
2024-01-28 18:37:16.523  - info: host.raspberrypi iobroker host.raspberrypi Counted 15 states of system.adapter.trashschedule.0
2024-01-28 18:37:16.530  - info: host.raspberrypi iobroker host.raspberrypi Counted 11 states (io.trashschedule.0.*) from states
2024-01-28 18:37:16.544  - info: host.raspberrypi iobroker host.raspberrypi Counted 6 states (system.adapter.trashschedule.0.*) from states
2024-01-28 18:37:17.092  - info: host.raspberrypi iobroker host.raspberrypi Counted 1 objects of trashschedule.0
2024-01-28 18:37:17.094  - info: host.raspberrypi iobroker host.raspberrypi Deleting 85 object(s).
2024-01-28 18:37:17.429  - info: host.raspberrypi iobroker host.raspberrypi Deleting 17 state(s).
2024-01-28 18:37:17.475  - info: vis-2.0 (11069) config.js changed. Upload.
2024-01-28 18:37:17.489  - info: host.raspberrypi object deleted system.adapter.trashschedule.0
2024-01-28 18:37:18.601  - info: host.raspberrypi iobroker exit 0
2024-01-28 18:37:53.039  - error: host.raspberrypi iobroker npm ERR! code ETIMEDOUTnpm ERR! syscall connectnpm ERR! errno ETIMEDOUTnpm ERR! network request to https://registry.npmjs.org/iobroker.javascript failed, reason: connect ETIMEDOUT 2606:4700::6810:1f22:443npm ERR! network This is a problem related to network connectivity.npm ERR! network In most cases you are behind a proxy or have bad network settings.npm ERR! network npm ERR! network If you are behind a proxy, please make sure that thenpm ERR! network 'proxy' config is set properly.  See: 'npm help config'npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-01-28T17_30_09_040Z-debug-0.loghost.raspberrypi Cannot install iobroker.javascript@7.1.6: 1
2024-01-28 18:37:54.704  - info: host.raspberrypi iobroker exit 25
2024-01-28 18:38:37.503  - info: host.raspberrypi iobroker add javascript --host raspberrypi
2024-01-28 18:38:41.121  - info: host.raspberrypi iobroker NPM version: 10.2.3
2024-01-28 18:38:41.124  - info: host.raspberrypi iobroker Installing iobroker.javascript@7.1.6... (System call)
2024-01-28 18:41:26.419  - error: host.raspberrypi cannot call visUtils: Not exists
2024-01-28 18:41:26.426  - error: host.raspberrypi cannot call visUtils: Not exists

also mache ich jetzt nun die 5. neu installation und überspringe diesen Adapter in der hoffnung dass das System dann mal endlich läuft...

MFG Schweizer

Homoran

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

auch nicht nach entfernen des Adapters...

Ist der wirklich entfernt?
oder nur die Instanz davon?

Schweiz

@homoran

na gott sei dank, ich habe die Instanz sowie den Adapter entfernt...
Neustart geamacht und es läuft wider...

MFG Schweizer

Homoran

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

@homoran

na gott sei dank, ich habe die Instanz sowie den Adapter entfernt...
Neustart geamacht und es läuft wider...

MFG Schweizer

aber ich verstehe es nicht warum der trashschedule das schuld sein soll.
nichtdass es der fehlende Neustart nach irgendeiner Aktion war.

Ansonsten müssest du ein Issue beim Adapter anlegen, damit @haus-automatisierung sich das mal ansehen kann.

Schweiz

@homoran

ich will ja keinen Adapter etwas in die schuhe schieben...
Nur ich habe eine ganze reihe Adapter installiert und konfiguriert, und dann möchte ich noch eine Visuallisierung und ees geht nicht... TS was der letzte, nun anders herum und schon klemmt es nach dem gleichen Adapter... ist sicherlich nur zufall...

habe gesucht und aktuell kann ich keinen finden der soooo viele probleme mit Adapter installation hat wie ich, auch keins wo ich schlussfolgern kann das TS schuld sein könnte...

MFG Schweizer

Glasfaser

@schweiz sagte in Jarvis Adapter lässt sich nicht Installieren:

Der fehler liegt hier ganz offensichtlich im Trashschedule,

2024-01-28 18:37:53.039 - error: host.raspberrypi iobroker npm ERR! code ETIMEDOUTnpm ERR! syscall connectnpm ERR! errno ETIMEDOUTnpm ERR! network request to https://registry.npmjs.org/iobroker.javascript failed, reason: connect ETIMEDOUT 2606:4700::6810:1f22:443npm ERR! network This is a problem related to network connectivity.npm ERR! network In most cases you are behind a proxy or have bad network settings.npm ERR! network npm ERR! network If you are behind a proxy, please make sure that thenpm ERR! network 'proxy' config is set properly. See: 'npm help config'npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2024-01-28T17_30_09_040Z-debug-0.loghost.raspberrypi Cannot install iobroker.javascript@7.1.6: 1

2024-01-28 18:37:54.704 - info: host.raspberrypi iobroker exit 25

Das heißt nach der Installation von Trashschedule soll wieder der Network Error kommen !?
( Ich finde dazu keinen Zusammenhang , das es an diesem Adapter liegt )

oder auch das der JS-Controller sich zerschießt !?

Und das wundert mich in deinem Log :

Cannot install iobroker.opi@0.1.2

ich finde diesen Adapter in keinem Log / Ausgaben von dir !

Glasfaser

@schweiz

Ich habe mal deinen alten Thread quer gelesen , dort hast / hattest du auch Netzwerkprobleme

und @Thomas-Braun hat dir dazu etwas geschrieben :

https://forum.iobroker.net/post/1107271

Community Forum

NEWS

Jarvis Adapter lässt sich nicht Installieren

Support us

756

32.5k

81.7k

1.3m