[gelöst] - Fritzbox-Adapter startet nicht
ioBroker Allgemein
30
Beiträge
6
Kommentatoren
2.8k
Aufrufe
5
Watching
-
Einen Benutzer in der FB mit den notwendigen Berechtigungen gibt es?
Wie sehen denn die Instanz Einstellungen aus?
Sollten da nicht auch diese Ports dann dabei sein:
Trying to connect to TR-064: 192.168.1.100:49000 TR-064: Got TAM uri: https://192.168.1.100:49443/tamcalllist.lua?sid=923a453cab69e31f&tamindex=0 -
@wendy2702
... und Port 1012 für den Call-Monitor? -
Einen Benutzer in der FB mit den notwendigen Berechtigungen gibt es?
Wie sehen denn die Instanz Einstellungen aus?
Sollten da nicht auch diese Ports dann dabei sein:
Trying to connect to TR-064: 192.168.1.100:49000 TR-064: Got TAM uri: https://192.168.1.100:49443/tamcalllist.lua?sid=923a453cab69e31f&tamindex=0Dadurch, dass TR-064 in den Netzwerkeinstellungen der Fritz!Box zugelassen sind, müssten die beiden Ports offen sein.
Welche Instanz-Einstellungen genau? Ich habe alles angehakt, Benutzer und Passwort sind korrekt. -
Dadurch, dass TR-064 in den Netzwerkeinstellungen der Fritz!Box zugelassen sind, müssten die beiden Ports offen sein.
Welche Instanz-Einstellungen genau? Ich habe alles angehakt, Benutzer und Passwort sind korrekt.@papi-0 sagte in Fritzbox-Adapter startet nicht:
müssten die beiden Ports offen sein
Die müssen aber dann auch in den Container weitergereicht werden.
-
@wendy2702
... und Port 1012 für den Call-Monitor?@codierknecht
1012 habe ich ja auch freigeschaltet.Oder meint Ihr, dass ich die Drei auch durchreichen muss?
-
@codierknecht
1012 habe ich ja auch freigeschaltet.Oder meint Ihr, dass ich die Drei auch durchreichen muss?
-
Dadurch, dass TR-064 in den Netzwerkeinstellungen der Fritz!Box zugelassen sind, müssten die beiden Ports offen sein.
Welche Instanz-Einstellungen genau? Ich habe alles angehakt, Benutzer und Passwort sind korrekt.@papi-0 sagte in Fritzbox-Adapter startet nicht:
Benutzer und Passwort sind korrekt.
Und der hat die Berechtigungen in der FB?
Und wie @Codierknecht schreibt: Ports müssen auch in den Container
-
@papi-0 sagte in Fritzbox-Adapter startet nicht:
Benutzer und Passwort sind korrekt.
Und der hat die Berechtigungen in der FB?
Und wie @Codierknecht schreibt: Ports müssen auch in den Container
@wendy2702
Jou, bin dabei, komme gleich mit Rückmeldung... -
@wendy2702
Jou, bin dabei, komme gleich mit Rückmeldung... -
@papi-0
Zeig mal die Ausgabe voniob diag -
@papi-0
Zeig mal die Ausgabe voniob diag======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : Insyde Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : Docker Kernel : x86_64 Userland : amd64 Systemuptime and Load: 22:34:22 up 7 days, 4:34, 0 users, load average: 3.25, 3.02, 2.95 CPU threads: 4 *** Time and Time Zones *** Wed Nov 22 21:34:22 UTC 2023 Wed Nov 22 22:34:22 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.6G 163M 46M 11G 11G Swap: 2.0G 1.4G 663M Total: 18G 5.9G 827M 16041 M total memory 4547 M used memory 4971 M active memory 5567 M inactive memory 166 M free memory 48 M buffer memory 11278 M swap cache 2047 M total swap 1384 M used swap 663 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/vg2/volume_1 btrfs 48T 27T 21T 58% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /opt/iobroker /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /etc/hosts tmpfs tmpfs 7.9G 0 7.9G 0% /proc/asound tmpfs tmpfs 7.9G 0 7.9G 0% /proc/acpi tmpfs tmpfs 7.9G 0 7.9G 0% /proc/scsi tmpfs tmpfs 7.9G 0 7.9G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/vg2/volume_1[/@docker/btrfs/subvolumes/9ab1c3faaeadf83f6f62dd1db43a34333cd29699762986eb66ad4c0a09a102a4] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/opt/iobroker /dev/vg2/volume_1[/docker/iobroker1_data] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/resolv.conf] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/hostname /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hostname] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 `-/etc/hosts /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hosts] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 Files in neuralgic directories: /var: 33M /var/ 30M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 13M /var/lib/dpkg /opt/iobroker/backups: 48M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 311M /opt/iobroker/iobroker-data/ 201M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory /home/iobroker/.diag.sh: line 277: nodejs: command not found *** NodeJS-Installation *** /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled + system.adapter.divera247.0 : divera247 : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.email.0 : email : iobroker1 - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker1 - enabled system.adapter.fritzbox.0 : fritzbox : iobroker1 - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker1 - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iot.0 : iot : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker1 - disabled, port: 54321 + system.adapter.net-tools.0 : net-tools : iobroker1 - enabled system.adapter.openweathermap.0 : openweathermap : iobroker1 - enabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.pushover.0 : pushover : iobroker1 - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker1 - enabled + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled + system.adapter.vesync.0 : vesync : iobroker1 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker1 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker1 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - disabled system.adapter.vis-weather.0 : vis-weather : iobroker1 - disabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker1 - enabled + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker1 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "divera247" : 0.2.0 , installed 0.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 3.0.6 , installed 2.2.0 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.6.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vesync" : 0.0.3 , installed 0.0.3 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.97.1 , installed 0.97.1 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 23727 States: 20029 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 35 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8701 0.0.0.0:* LISTEN 1000 130242998 - tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 130236565 - tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 130234447 - tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1000 130243065 - tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1000 130243663 - tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1000 130243202 - tcp6 0 0 :::8081 :::* LISTEN 1000 130238696 - tcp6 0 0 :::8084 :::* LISTEN 1000 130264322 - tcp6 0 0 :::8088 :::* LISTEN 1000 130259813 - udp 0 0 0.0.0.0:8472 0.0.0.0:* 0 130214941 - *** Log File - Last 25 Lines *** 2023-11-22 22:30:08.403 - info: host.iobroker1 instance system.adapter.yr.0 started with pid 5343 2023-11-22 22:30:11.070 - info: yr.0 (5343) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:11.243 - info: yr.0 (5343) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:11.290 - info: yr.0 (5343) longitude/longitude not set, get data from system 2023-11-22 22:30:11.326 - info: yr.0 (5343) system latitude: 51.28058000 longitude: 6.45123000 2023-11-22 22:30:12.483 - info: host.iobroker1 instance system.adapter.daswetter.0 started with pid 5362 2023-11-22 22:30:15.224 - info: daswetter.0 (5362) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:15.421 - info: daswetter.0 (5362) starting. Version 3.1.10 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:31.553 - info: openweathermap.0 (5321) Terminated (NO_ERROR): Without reason 2023-11-22 22:30:32.093 - info: host.iobroker1 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-11-22 22:30:42.180 - info: yr.0 (5343) Data updated. 2023-11-22 22:30:42.183 - info: yr.0 (5343) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:30:42.735 - info: host.iobroker1 instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:30:46.955 - info: daswetter.0 (5362) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2023-11-22 22:30:47.471 - info: daswetter.0 (5362) cleaned everything up... 2023-11-22 22:30:47.502 - info: host.iobroker1 instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:31:10.559 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:33:11.546 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:34:17.747 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:35:00.072 - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 6375 2023-11-22 22:35:03.088 - info: dwd.0 (6375) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:35:03.524 - info: dwd.0 (6375) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:35:06.569 - info: dwd.0 (6375) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:35:07.109 - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:35:16.459 - info: hm-rega.0 (291) pollingTrigger ============ Mark until here for C&P =============Copy text starting here: ======================= SUMMARY ======================= v.2023-10-10 model name : Intel(R) Atom(TM) CPU C2538 @ 2.40GHz Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 35 Pending iob updates: 1 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 16G 4.5G 306M 46M 11G 11G Swap: 2.0G 1.4G 666M Total: 18G 5.9G 972M Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin Objects: 23727 States: 20029 Size of iob-Database: 21M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying ===Ich sehe schon - *** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
-
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : Insyde Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : Docker Kernel : x86_64 Userland : amd64 Systemuptime and Load: 22:34:22 up 7 days, 4:34, 0 users, load average: 3.25, 3.02, 2.95 CPU threads: 4 *** Time and Time Zones *** Wed Nov 22 21:34:22 UTC 2023 Wed Nov 22 22:34:22 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.6G 163M 46M 11G 11G Swap: 2.0G 1.4G 663M Total: 18G 5.9G 827M 16041 M total memory 4547 M used memory 4971 M active memory 5567 M inactive memory 166 M free memory 48 M buffer memory 11278 M swap cache 2047 M total swap 1384 M used swap 663 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/vg2/volume_1 btrfs 48T 27T 21T 58% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /opt/iobroker /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /etc/hosts tmpfs tmpfs 7.9G 0 7.9G 0% /proc/asound tmpfs tmpfs 7.9G 0 7.9G 0% /proc/acpi tmpfs tmpfs 7.9G 0 7.9G 0% /proc/scsi tmpfs tmpfs 7.9G 0 7.9G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/vg2/volume_1[/@docker/btrfs/subvolumes/9ab1c3faaeadf83f6f62dd1db43a34333cd29699762986eb66ad4c0a09a102a4] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/opt/iobroker /dev/vg2/volume_1[/docker/iobroker1_data] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/resolv.conf] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/hostname /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hostname] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 `-/etc/hosts /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hosts] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 Files in neuralgic directories: /var: 33M /var/ 30M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 13M /var/lib/dpkg /opt/iobroker/backups: 48M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 311M /opt/iobroker/iobroker-data/ 201M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory /home/iobroker/.diag.sh: line 277: nodejs: command not found *** NodeJS-Installation *** /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled + system.adapter.divera247.0 : divera247 : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.email.0 : email : iobroker1 - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker1 - enabled system.adapter.fritzbox.0 : fritzbox : iobroker1 - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker1 - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iot.0 : iot : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker1 - disabled, port: 54321 + system.adapter.net-tools.0 : net-tools : iobroker1 - enabled system.adapter.openweathermap.0 : openweathermap : iobroker1 - enabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.pushover.0 : pushover : iobroker1 - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker1 - enabled + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled + system.adapter.vesync.0 : vesync : iobroker1 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker1 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker1 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - disabled system.adapter.vis-weather.0 : vis-weather : iobroker1 - disabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker1 - enabled + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker1 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "divera247" : 0.2.0 , installed 0.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 3.0.6 , installed 2.2.0 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.6.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vesync" : 0.0.3 , installed 0.0.3 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.97.1 , installed 0.97.1 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 23727 States: 20029 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 35 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8701 0.0.0.0:* LISTEN 1000 130242998 - tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 130236565 - tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 130234447 - tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1000 130243065 - tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1000 130243663 - tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1000 130243202 - tcp6 0 0 :::8081 :::* LISTEN 1000 130238696 - tcp6 0 0 :::8084 :::* LISTEN 1000 130264322 - tcp6 0 0 :::8088 :::* LISTEN 1000 130259813 - udp 0 0 0.0.0.0:8472 0.0.0.0:* 0 130214941 - *** Log File - Last 25 Lines *** 2023-11-22 22:30:08.403 - info: host.iobroker1 instance system.adapter.yr.0 started with pid 5343 2023-11-22 22:30:11.070 - info: yr.0 (5343) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:11.243 - info: yr.0 (5343) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:11.290 - info: yr.0 (5343) longitude/longitude not set, get data from system 2023-11-22 22:30:11.326 - info: yr.0 (5343) system latitude: 51.28058000 longitude: 6.45123000 2023-11-22 22:30:12.483 - info: host.iobroker1 instance system.adapter.daswetter.0 started with pid 5362 2023-11-22 22:30:15.224 - info: daswetter.0 (5362) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:15.421 - info: daswetter.0 (5362) starting. Version 3.1.10 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:31.553 - info: openweathermap.0 (5321) Terminated (NO_ERROR): Without reason 2023-11-22 22:30:32.093 - info: host.iobroker1 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-11-22 22:30:42.180 - info: yr.0 (5343) Data updated. 2023-11-22 22:30:42.183 - info: yr.0 (5343) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:30:42.735 - info: host.iobroker1 instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:30:46.955 - info: daswetter.0 (5362) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2023-11-22 22:30:47.471 - info: daswetter.0 (5362) cleaned everything up... 2023-11-22 22:30:47.502 - info: host.iobroker1 instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:31:10.559 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:33:11.546 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:34:17.747 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:35:00.072 - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 6375 2023-11-22 22:35:03.088 - info: dwd.0 (6375) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:35:03.524 - info: dwd.0 (6375) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:35:06.569 - info: dwd.0 (6375) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:35:07.109 - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:35:16.459 - info: hm-rega.0 (291) pollingTrigger ============ Mark until here for C&P =============Copy text starting here: ======================= SUMMARY ======================= v.2023-10-10 model name : Intel(R) Atom(TM) CPU C2538 @ 2.40GHz Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 35 Pending iob updates: 1 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 16G 4.5G 306M 46M 11G 11G Swap: 2.0G 1.4G 666M Total: 18G 5.9G 972M Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin Objects: 23727 States: 20029 Size of iob-Database: 21M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying ===Ich sehe schon - *** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
-
Wo muss nodejs denn stattdessen hin und wie geht das?
Welche OS-Updates sind denn da pending?
Der Host meint zwar es gäbe ein Update von 5.0.16 auf 5.0.16 aber das hört sich etwas sinnfrei an.
-
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : Insyde Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : Docker Kernel : x86_64 Userland : amd64 Systemuptime and Load: 22:34:22 up 7 days, 4:34, 0 users, load average: 3.25, 3.02, 2.95 CPU threads: 4 *** Time and Time Zones *** Wed Nov 22 21:34:22 UTC 2023 Wed Nov 22 22:34:22 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.6G 163M 46M 11G 11G Swap: 2.0G 1.4G 663M Total: 18G 5.9G 827M 16041 M total memory 4547 M used memory 4971 M active memory 5567 M inactive memory 166 M free memory 48 M buffer memory 11278 M swap cache 2047 M total swap 1384 M used swap 663 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/vg2/volume_1 btrfs 48T 27T 21T 58% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /opt/iobroker /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /etc/hosts tmpfs tmpfs 7.9G 0 7.9G 0% /proc/asound tmpfs tmpfs 7.9G 0 7.9G 0% /proc/acpi tmpfs tmpfs 7.9G 0 7.9G 0% /proc/scsi tmpfs tmpfs 7.9G 0 7.9G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/vg2/volume_1[/@docker/btrfs/subvolumes/9ab1c3faaeadf83f6f62dd1db43a34333cd29699762986eb66ad4c0a09a102a4] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/opt/iobroker /dev/vg2/volume_1[/docker/iobroker1_data] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/resolv.conf] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/hostname /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hostname] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 `-/etc/hosts /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hosts] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 Files in neuralgic directories: /var: 33M /var/ 30M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 13M /var/lib/dpkg /opt/iobroker/backups: 48M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 311M /opt/iobroker/iobroker-data/ 201M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory /home/iobroker/.diag.sh: line 277: nodejs: command not found *** NodeJS-Installation *** /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled + system.adapter.divera247.0 : divera247 : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.email.0 : email : iobroker1 - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker1 - enabled system.adapter.fritzbox.0 : fritzbox : iobroker1 - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker1 - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iot.0 : iot : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker1 - disabled, port: 54321 + system.adapter.net-tools.0 : net-tools : iobroker1 - enabled system.adapter.openweathermap.0 : openweathermap : iobroker1 - enabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.pushover.0 : pushover : iobroker1 - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker1 - enabled + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled + system.adapter.vesync.0 : vesync : iobroker1 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker1 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker1 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - disabled system.adapter.vis-weather.0 : vis-weather : iobroker1 - disabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker1 - enabled + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker1 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "divera247" : 0.2.0 , installed 0.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 3.0.6 , installed 2.2.0 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.6.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vesync" : 0.0.3 , installed 0.0.3 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.97.1 , installed 0.97.1 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 23727 States: 20029 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 35 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8701 0.0.0.0:* LISTEN 1000 130242998 - tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 130236565 - tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 130234447 - tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1000 130243065 - tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1000 130243663 - tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1000 130243202 - tcp6 0 0 :::8081 :::* LISTEN 1000 130238696 - tcp6 0 0 :::8084 :::* LISTEN 1000 130264322 - tcp6 0 0 :::8088 :::* LISTEN 1000 130259813 - udp 0 0 0.0.0.0:8472 0.0.0.0:* 0 130214941 - *** Log File - Last 25 Lines *** 2023-11-22 22:30:08.403 - info: host.iobroker1 instance system.adapter.yr.0 started with pid 5343 2023-11-22 22:30:11.070 - info: yr.0 (5343) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:11.243 - info: yr.0 (5343) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:11.290 - info: yr.0 (5343) longitude/longitude not set, get data from system 2023-11-22 22:30:11.326 - info: yr.0 (5343) system latitude: 51.28058000 longitude: 6.45123000 2023-11-22 22:30:12.483 - info: host.iobroker1 instance system.adapter.daswetter.0 started with pid 5362 2023-11-22 22:30:15.224 - info: daswetter.0 (5362) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:15.421 - info: daswetter.0 (5362) starting. Version 3.1.10 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:31.553 - info: openweathermap.0 (5321) Terminated (NO_ERROR): Without reason 2023-11-22 22:30:32.093 - info: host.iobroker1 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-11-22 22:30:42.180 - info: yr.0 (5343) Data updated. 2023-11-22 22:30:42.183 - info: yr.0 (5343) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:30:42.735 - info: host.iobroker1 instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:30:46.955 - info: daswetter.0 (5362) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2023-11-22 22:30:47.471 - info: daswetter.0 (5362) cleaned everything up... 2023-11-22 22:30:47.502 - info: host.iobroker1 instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:31:10.559 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:33:11.546 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:34:17.747 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:35:00.072 - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 6375 2023-11-22 22:35:03.088 - info: dwd.0 (6375) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:35:03.524 - info: dwd.0 (6375) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:35:06.569 - info: dwd.0 (6375) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:35:07.109 - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:35:16.459 - info: hm-rega.0 (291) pollingTrigger ============ Mark until here for C&P =============Copy text starting here: ======================= SUMMARY ======================= v.2023-10-10 model name : Intel(R) Atom(TM) CPU C2538 @ 2.40GHz Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 35 Pending iob updates: 1 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 16G 4.5G 306M 46M 11G 11G Swap: 2.0G 1.4G 666M Total: 18G 5.9G 972M Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin Objects: 23727 States: 20029 Size of iob-Database: 21M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying ===Ich sehe schon - *** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
@papi-0 sagte in Fritzbox-Adapter startet nicht:
Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
Du hast das Verzeichnis mit den Daten vom NAS in den Container gemappt?
- Container stoppen (und löschen)
- Neuen Container mit identischen EInstellungen erzeugen und starten
Dazu am besten das aktuelle Image von buanet verwenden - warten, warten, warten ... voilá
Container sind Wegwerfartikel. Dazu sind sie gedacht.
-
@papi-0 sagte in Fritzbox-Adapter startet nicht:
Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
Du hast das Verzeichnis mit den Daten vom NAS in den Container gemappt?
- Container stoppen (und löschen)
- Neuen Container mit identischen EInstellungen erzeugen und starten
Dazu am besten das aktuelle Image von buanet verwenden - warten, warten, warten ... voilá
Container sind Wegwerfartikel. Dazu sind sie gedacht.
-
Ja, ich habe das Verzeichnis mit den Daten vom NAS in den Container gemappt.
Also mit Portainer einfach ein Recreate unter neuem Image ausführen?
@papi-0
Ich habe das immer ohne Portainer gemacht.
Ist ja mit ein paar Klicks gemacht.
Mit Portainer müssen andere weiterhelfen.Läuft auf dem NAS eigentlich noch etwas anderes, außer dass es als Datengrab dient?
Wenn Portkollisionen ausgeschlossen sind, könntest Du den neuen Container auch im Host-Modus betreiben. Spart das Durchreichen der einzelnen Ports. -
@papi-0
Ich habe das immer ohne Portainer gemacht.
Ist ja mit ein paar Klicks gemacht.
Mit Portainer müssen andere weiterhelfen.Läuft auf dem NAS eigentlich noch etwas anderes, außer dass es als Datengrab dient?
Wenn Portkollisionen ausgeschlossen sind, könntest Du den neuen Container auch im Host-Modus betreiben. Spart das Durchreichen der einzelnen Ports.:grinning:
Ja, da läuft noch etwas viel Anderes, der Host-Mode wäre mir darum echt zu heikel.
Das Ding ist so ausgelastet, dass ich schon ein paar Container auf Raspi auslagern musste.
Bisher habe ich meine Ports aber noch genauestens im Griff, da sollte sich nichts überschneiden.Ok, dann erstmal vielen Dank für die professionelle Hilfe!
Ich werde das wohl besser am Wochenende direkt zu Hause machen, da ich momentan auf Dienstreise bin, solche Sachen nicht gerne fernab der Basis per VPN mache, langsam in die Kiste muss und vorher alles wegsichern möchte, was erfahrungsgemäß eine Weile dauert, genauso, wie dann die Wiederherstellung des ioBrokers.
1000 Dank, ich werde wieder Rückmeldung erstatten.
Gruß Michael
-
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Hardware Vendor : Insyde Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Virtualization : Docker Kernel : x86_64 Userland : amd64 Systemuptime and Load: 22:34:22 up 7 days, 4:34, 0 users, load average: 3.25, 3.02, 2.95 CPU threads: 4 *** Time and Time Zones *** Wed Nov 22 21:34:22 UTC 2023 Wed Nov 22 22:34:22 CET 2023 CET +0100 Etc/UTC *** User and Groups *** root /root root *** X-Server-Setup *** X-Server: false Desktop: Terminal: *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.6G 163M 46M 11G 11G Swap: 2.0G 1.4G 663M Total: 18G 5.9G 827M 16041 M total memory 4547 M used memory 4971 M active memory 5567 M inactive memory 166 M free memory 48 M buffer memory 11278 M swap cache 2047 M total swap 1384 M used swap 663 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/vg2/volume_1 btrfs 48T 27T 21T 58% / tmpfs tmpfs 64M 0 64M 0% /dev tmpfs tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup shm tmpfs 64M 0 64M 0% /dev/shm /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /opt/iobroker /dev/vg2/volume_1 btrfs 48T 27T 21T 58% /etc/hosts tmpfs tmpfs 7.9G 0 7.9G 0% /proc/asound tmpfs tmpfs 7.9G 0 7.9G 0% /proc/acpi tmpfs tmpfs 7.9G 0 7.9G 0% /proc/scsi tmpfs tmpfs 7.9G 0 7.9G 0% /sys/firmware Messages concerning ext4 filesystem in dmesg: [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled [Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/vg2/volume_1[/@docker/btrfs/subvolumes/9ab1c3faaeadf83f6f62dd1db43a34333cd29699762986eb66ad4c0a09a102a4] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/opt/iobroker /dev/vg2/volume_1[/docker/iobroker1_data] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/resolv.conf] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 |-/etc/hostname /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hostname] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 `-/etc/hosts /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hosts] btrfs rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50 Files in neuralgic directories: /var: 33M /var/ 30M /var/lib 18M /var/lib/apt/lists 18M /var/lib/apt 13M /var/lib/dpkg /opt/iobroker/backups: 48M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 311M /opt/iobroker/iobroker-data/ 201M /opt/iobroker/iobroker-data/files 77M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory /home/iobroker/.diag.sh: line 277: nodejs: command not found *** NodeJS-Installation *** /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled + system.adapter.divera247.0 : divera247 : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.email.0 : email : iobroker1 - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker1 - enabled system.adapter.fritzbox.0 : fritzbox : iobroker1 - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker1 - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iot.0 : iot : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker1 - disabled, port: 54321 + system.adapter.net-tools.0 : net-tools : iobroker1 - enabled system.adapter.openweathermap.0 : openweathermap : iobroker1 - enabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.pushover.0 : pushover : iobroker1 - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker1 - enabled + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled + system.adapter.vesync.0 : vesync : iobroker1 - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker1 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker1 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - disabled system.adapter.vis-weather.0 : vis-weather : iobroker1 - disabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker1 - enabled + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker1 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.1 , installed 3.26.1 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "divera247" : 0.2.0 , installed 0.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 3.0.6 , installed 2.2.0 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.4.5 , installed 0.4.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.6.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vesync" : 0.0.3 , installed 0.0.3 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.97.1 , installed 0.97.1 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 23727 States: 20029 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 35 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8701 0.0.0.0:* LISTEN 1000 130242998 - tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 130236565 - tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 130234447 - tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1000 130243065 - tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1000 130243663 - tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1000 130243202 - tcp6 0 0 :::8081 :::* LISTEN 1000 130238696 - tcp6 0 0 :::8084 :::* LISTEN 1000 130264322 - tcp6 0 0 :::8088 :::* LISTEN 1000 130259813 - udp 0 0 0.0.0.0:8472 0.0.0.0:* 0 130214941 - *** Log File - Last 25 Lines *** 2023-11-22 22:30:08.403 - info: host.iobroker1 instance system.adapter.yr.0 started with pid 5343 2023-11-22 22:30:11.070 - info: yr.0 (5343) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:11.243 - info: yr.0 (5343) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:11.290 - info: yr.0 (5343) longitude/longitude not set, get data from system 2023-11-22 22:30:11.326 - info: yr.0 (5343) system latitude: 51.28058000 longitude: 6.45123000 2023-11-22 22:30:12.483 - info: host.iobroker1 instance system.adapter.daswetter.0 started with pid 5362 2023-11-22 22:30:15.224 - info: daswetter.0 (5362) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:30:15.421 - info: daswetter.0 (5362) starting. Version 3.1.10 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:30:31.553 - info: openweathermap.0 (5321) Terminated (NO_ERROR): Without reason 2023-11-22 22:30:32.093 - info: host.iobroker1 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-11-22 22:30:42.180 - info: yr.0 (5343) Data updated. 2023-11-22 22:30:42.183 - info: yr.0 (5343) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:30:42.735 - info: host.iobroker1 instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:30:46.955 - info: daswetter.0 (5362) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2023-11-22 22:30:47.471 - info: daswetter.0 (5362) cleaned everything up... 2023-11-22 22:30:47.502 - info: host.iobroker1 instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:31:10.559 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:33:11.546 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:34:17.747 - info: hm-rega.0 (291) pollingTrigger 2023-11-22 22:35:00.072 - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 6375 2023-11-22 22:35:03.088 - info: dwd.0 (6375) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2023-11-22 22:35:03.524 - info: dwd.0 (6375) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.16 2023-11-22 22:35:06.569 - info: dwd.0 (6375) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-11-22 22:35:07.109 - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-11-22 22:35:16.459 - info: hm-rega.0 (291) pollingTrigger ============ Mark until here for C&P =============Copy text starting here: ======================= SUMMARY ======================= v.2023-10-10 model name : Intel(R) Atom(TM) CPU C2538 @ 2.40GHz Kernel : x86_64 Userland : amd64 Docker : v8.1.0 Installation: Docker Kernel: x86_64 Userland: amd64 Timezone: Etc/UTC User-ID: 0 X-Server: false Pending OS-Updates: 35 Pending iob updates: 1 /home/iobroker/.diag.sh: line 486: nodejs: command not found Nodejs-Installation: /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please check https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian for more information on how to fix these errors. MEMORY: total used free shared buff/cache available Mem: 16G 4.5G 306M 46M 11G 11G Swap: 2.0G 1.4G 666M Total: 18G 5.9G 972M Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.1 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker1 - enabled, port: 8088, bind: 0.0.0.0, run as: admin Objects: 23727 States: 20029 Size of iob-Database: 21M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== === Mark text until here for copying ===Ich sehe schon - *** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.
Quark geschrieben...
-
Quark geschrieben...
-
@thomas-braun
Was soll denn dieser Beitrag?
489
Online32.7k
Benutzer82.4k
Themen1.3m
Beiträge