[gelöst] - Fritzbox-Adapter startet nicht

wendy2702

@papi-0 sagte in Fritzbox-Adapter startet nicht:

Benutzer und Passwort sind korrekt.

Und der hat die Berechtigungen in der FB?

Und wie @Codierknecht schreibt: Ports müssen auch in den Container

Papi 0

@wendy2702
Jou, bin dabei, komme gleich mit Rückmeldung...

Papi 0

@papi-0
Leider negativ. :-/
Die gleichen Meldungen, jetzt auch mit den 3 Ports (TCP).

Codierknecht

@papi-0
Zeig mal die Ausgabe von

iob diag

Papi 0

@codierknecht

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
Hardware Vendor : Insyde
Kernel          : x86_64
Userland        : amd64
Docker          : v8.1.0
Virtualization  : Docker
Kernel          : x86_64
Userland        : amd64

Systemuptime and Load:
 22:34:22 up 7 days,  4:34,  0 users,  load average: 3.25, 3.02, 2.95
CPU threads: 4


*** Time and Time Zones ***
Wed Nov 22 21:34:22 UTC 2023
Wed Nov 22 22:34:22 CET 2023
CET +0100
Etc/UTC

*** User and Groups ***
root
/root
root

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             16G        4.6G        163M         46M         11G         11G
Swap:           2.0G        1.4G        663M
Total:           18G        5.9G        827M

        16041 M total memory
         4547 M used memory
         4971 M active memory
         5567 M inactive memory
          166 M free memory
           48 M buffer memory
        11278 M swap cache
         2047 M total swap
         1384 M used swap
          663 M free swap

*** FILESYSTEM ***
Filesystem        Type   Size  Used Avail Use% Mounted on
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /
tmpfs             tmpfs   64M     0   64M   0% /dev
tmpfs             tmpfs  7.9G     0  7.9G   0% /sys/fs/cgroup
shm               tmpfs   64M     0   64M   0% /dev/shm
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /opt/iobroker
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /etc/hosts
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/asound
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/acpi
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/scsi
tmpfs             tmpfs  7.9G     0  7.9G   0% /sys/firmware

Messages concerning ext4 filesystem in dmesg:
[Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled
[Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET             SOURCE                                                                                                              FSTYPE OPTIONS
/                  /dev/vg2/volume_1[/@docker/btrfs/subvolumes/9ab1c3faaeadf83f6f62dd1db43a34333cd29699762986eb66ad4c0a09a102a4]       btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/opt/iobroker    /dev/vg2/volume_1[/docker/iobroker1_data]                                                                           btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/resolv.conf] btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/etc/hostname    /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hostname]    btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
`-/etc/hosts       /dev/vg2/volume_1[/@docker/containers/1a7f7c299ee380d7f600c1de144d6c14a8d7d32d35a0d83dcef115c7819c7e29/hosts]       btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50

Files in neuralgic directories:

/var:
33M     /var/
30M     /var/lib
18M     /var/lib/apt/lists
18M     /var/lib/apt
13M     /var/lib/dpkg



/opt/iobroker/backups:
48M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
311M    /opt/iobroker/iobroker-data/
201M    /opt/iobroker/iobroker-data/files
77M     /opt/iobroker/iobroker-data/backup-objects
52M     /opt/iobroker/iobroker-data/files/javascript.admin
43M     /opt/iobroker/iobroker-data/files/iot.admin

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
21M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
13M     /opt/iobroker/iobroker-data/states.jsonl
8.5M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory
/home/iobroker/.diag.sh: line 277: nodejs: command not found

*** NodeJS-Installation ***

 
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7
/usr/bin/corepack       0.18.0
/home/iobroker/.diag.sh: line 288: nodejs: command not found
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages
        500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.16
admin:          6.12.0
javascript:     7.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker1                                -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker1                                -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker1                                -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker1                                -  enabled
+ system.adapter.divera247.0              : divera247             : iobroker1                                -  enabled
  system.adapter.dwd.0                    : dwd                   : iobroker1                                -  enabled
+ system.adapter.email.0                  : email                 : iobroker1                                -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker1                                -  enabled
  system.adapter.fritzbox.0               : fritzbox              : iobroker1                                -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : iobroker1                                -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker1                                -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker1                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.info.0                   : info                  : iobroker1                                -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker1                                -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker1                                -  enabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : iobroker1                                - disabled, port: 54321
+ system.adapter.net-tools.0              : net-tools             : iobroker1                                -  enabled
  system.adapter.openweathermap.0         : openweathermap        : iobroker1                                -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker1                                -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker1                                -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobroker1                                -  enabled
+ system.adapter.tr-064.0                 : tr-064                : iobroker1                                -  enabled
+ system.adapter.vesync.0                 : vesync                : iobroker1                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker1                                - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker1                                - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker1                                - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker1                                -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker1                                - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker1                                - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker1                                - disabled
  system.adapter.vis.0                    : vis                   : iobroker1                                -  enabled
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.worx.0                   : worx                  : iobroker1                                -  enabled
+ system.adapter.ws.0                     : ws                    : iobroker1                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : iobroker1                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker1                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
sources       : conf/sources-dist.json
online        : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.26.1   , installed 3.26.1
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "divera247"    : 0.2.0    , installed 0.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.2.0    , installed 1.2.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fullybrowser" : 3.0.6    , installed 2.2.0  [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.16   , installed 5.0.16
Adapter    "mihome-vacuum": 4.1.0    , installed 4.1.0
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.4.5   , installed 0.4.5
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.6.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vesync"       : 0.0.3    , installed 0.0.3
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.97.1   , installed 0.97.1
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        23727
States:         20029

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 35

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:8701            0.0.0.0:*               LISTEN      1000       130242998  -                   
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       130236565  -                   
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       130234447  -                   
tcp        0      0 0.0.0.0:9292            0.0.0.0:*               LISTEN      1000       130243065  -                   
tcp        0      0 0.0.0.0:2001            0.0.0.0:*               LISTEN      1000       130243663  -                   
tcp        0      0 0.0.0.0:2010            0.0.0.0:*               LISTEN      1000       130243202  -                   
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       130238696  -                   
tcp6       0      0 :::8084                 :::*                    LISTEN      1000       130264322  -                   
tcp6       0      0 :::8088                 :::*                    LISTEN      1000       130259813  -                   
udp        0      0 0.0.0.0:8472            0.0.0.0:*                           0          130214941  -                   

*** Log File - Last 25 Lines ***

2023-11-22 22:30:08.403  - info: host.iobroker1 instance system.adapter.yr.0 started with pid 5343
2023-11-22 22:30:11.070  - info: yr.0 (5343) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-11-22 22:30:11.243  - info: yr.0 (5343) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v18.17.1, js-controller: 5.0.16
2023-11-22 22:30:11.290  - info: yr.0 (5343) longitude/longitude not set, get data from system
2023-11-22 22:30:11.326  - info: yr.0 (5343) system latitude: 51.28058000 longitude: 6.45123000
2023-11-22 22:30:12.483  - info: host.iobroker1 instance system.adapter.daswetter.0 started with pid 5362
2023-11-22 22:30:15.224  - info: daswetter.0 (5362) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-11-22 22:30:15.421  - info: daswetter.0 (5362) starting. Version 3.1.10 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.17.1, js-controller: 5.0.16
2023-11-22 22:30:31.553  - info: openweathermap.0 (5321) Terminated (NO_ERROR): Without reason
2023-11-22 22:30:32.093  - info: host.iobroker1 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR)
2023-11-22 22:30:42.180  - info: yr.0 (5343) Data updated.
2023-11-22 22:30:42.183  - info: yr.0 (5343) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-11-22 22:30:42.735  - info: host.iobroker1 instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-11-22 22:30:46.955  - info: daswetter.0 (5362) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-11-22 22:30:47.471  - info: daswetter.0 (5362) cleaned everything up...
2023-11-22 22:30:47.502  - info: host.iobroker1 instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-11-22 22:31:10.559  - info: hm-rega.0 (291) pollingTrigger
2023-11-22 22:33:11.546  - info: hm-rega.0 (291) pollingTrigger
2023-11-22 22:34:17.747  - info: hm-rega.0 (291) pollingTrigger
2023-11-22 22:35:00.072  - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 6375
2023-11-22 22:35:03.088  - info: dwd.0 (6375) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2023-11-22 22:35:03.524  - info: dwd.0 (6375) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.16
2023-11-22 22:35:06.569  - info: dwd.0 (6375) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-11-22 22:35:07.109  - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-11-22 22:35:16.459  - info: hm-rega.0 (291) pollingTrigger



============ Mark until here for C&P =============

Copy text starting here:


======================= SUMMARY =======================
                        v.2023-10-10


model name      : Intel(R) Atom(TM) CPU  C2538  @ 2.40GHz
Kernel          : x86_64
Userland        : amd64
Docker          : v8.1.0

Installation:           Docker
Kernel:                 x86_64
Userland:               amd64
Timezone:               Etc/UTC
User-ID:                0
X-Server:               false


Pending OS-Updates:     35
Pending iob updates:    1

/home/iobroker/.diag.sh: line 486: nodejs: command not found
Nodejs-Installation:     
                        /usr/bin/node           v18.17.1
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7
                        /usr/bin/corepack       0.18.0

Recommended versions are nodejs 18.18.2 and npm 9.8.1
*** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.

Please check
https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian
for more information on how to fix these errors.

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:             16G        4.5G        306M         46M         11G         11G
Swap:           2.0G        1.4G        666M
Total:           18G        5.9G        972M

Active iob-Instances:   28
Active repo(s): stable

ioBroker Core:          js-controller           5.0.16
                        admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin

Objects:                23727
States:                 20029

Size of iob-Database:

21M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================


=== Mark text until here for copying ===

Ich sehe schon - *** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.

Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.

Codierknecht

@papi-0

*** nodejs is NOT correctly installed ***

Pending OS-Updates:     35

Pending iob updates:    1

Papi 0

@codierknecht

Wo muss nodejs denn stattdessen hin und wie geht das?

Welche OS-Updates sind denn da pending?

Der Host meint zwar es gäbe ein Update von 5.0.16 auf 5.0.16 aber das hört sich etwas sinnfrei an.
Screenshot 2023-11-22 225804.png

Codierknecht

@papi-0 sagte in Fritzbox-Adapter startet nicht:

Hier ist aber mein Latein eingeschränkt, denn mit Linux habe ich es nicht so und ich weiß auch nicht, wo nodejs ansonsten hin muss und wie ich das bewerkstelligen muss.

Du hast das Verzeichnis mit den Daten vom NAS in den Container gemappt?

Container stoppen (und löschen)
Neuen Container mit identischen EInstellungen erzeugen und starten
Dazu am besten das aktuelle Image von buanet verwenden
warten, warten, warten ... voilá

Container sind Wegwerfartikel. Dazu sind sie gedacht.

Papi 0

@codierknecht

Ja, ich habe das Verzeichnis mit den Daten vom NAS in den Container gemappt.

Also mit Portainer einfach ein Recreate unter neuem Image ausführen?

Codierknecht

@papi-0
Ich habe das immer ohne Portainer gemacht.
Ist ja mit ein paar Klicks gemacht.
Mit Portainer müssen andere weiterhelfen.

Läuft auf dem NAS eigentlich noch etwas anderes, außer dass es als Datengrab dient?
Wenn Portkollisionen ausgeschlossen sind, könntest Du den neuen Container auch im Host-Modus betreiben. Spart das Durchreichen der einzelnen Ports.

Papi 0

@codierknecht

:grinning:
Ja, da läuft noch etwas viel Anderes, der Host-Mode wäre mir darum echt zu heikel.
Das Ding ist so ausgelastet, dass ich schon ein paar Container auf Raspi auslagern musste.
Bisher habe ich meine Ports aber noch genauestens im Griff, da sollte sich nichts überschneiden.

Ok, dann erstmal vielen Dank für die professionelle Hilfe!

Ich werde das wohl besser am Wochenende direkt zu Hause machen, da ich momentan auf Dienstreise bin, solche Sachen nicht gerne fernab der Basis per VPN mache, langsam in die Kiste muss und vorher alles wegsichern möchte, was erfahrungsgemäß eine Weile dauert, genauso, wie dann die Wiederherstellung des ioBrokers.

1000 Dank, ich werde wieder Rückmeldung erstatten.

Gruß Michael

Thomas Braun

Quark geschrieben...

Papi 0

@thomas-braun
Was soll denn dieser Beitrag?

DJMarc75

@papi-0
wenn man selbst "Unsinn" geschrieben hat dann löscht man die eigenen Beiträge und schreibt dann eben so was wie "Quark geschrieben" !

Papi 0

@codierknecht

So, wie angekündigt, habe ich Deinen Rat gerade befolgt. Der ioBroker läuft mit aktuellem Image (buanet/iobroker:latest (22.11.2023)) wieder, aber das eingangs aufgeführte Problem hat sich leider nicht verflüchtigt, obwohl Nodejs wohl nun korrekt installiert ist, wie die Diagnose mitteilt:

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
Hardware Vendor : Insyde
Kernel          : x86_64
Userland        : amd64
Docker          : v9.0.1
Virtualization  : Docker
Kernel          : x86_64
Userland        : amd64

Systemuptime and Load:
 08:37:26 up 10 days, 14:37,  0 user,  load average: 3.07, 3.85, 4.39
CPU threads: 4


*** Time and Time Zones ***
Sun Nov 26 07:37:26 UTC 2023
Sun Nov 26 08:37:26 CET 2023
CET +0100
Etc/UTC

*** User and Groups ***
root
/root
root

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             16G         15G        1.6G        243M         10G        1.6G
Swap:           2.1G        1.7G        461M
Total:           18G         16G        2.0G

        16041 M total memory
        14550 M used memory
         4948 M active memory
         6405 M inactive memory
         1490 M free memory
           23 M buffer memory
         9796 M swap cache
         2047 M total swap
         1607 M used swap
          440 M free swap

*** FILESYSTEM ***
Filesystem        Type   Size  Used Avail Use% Mounted on
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /
tmpfs             tmpfs   64M     0   64M   0% /dev
tmpfs             tmpfs  7.9G     0  7.9G   0% /sys/fs/cgroup
shm               tmpfs   64M     0   64M   0% /dev/shm
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /opt/iobroker
/dev/vg2/volume_1 btrfs   48T   27T   21T  58% /etc/hosts
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/asound
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/acpi
tmpfs             tmpfs  7.9G     0  7.9G   0% /proc/scsi
tmpfs             tmpfs  7.9G     0  7.9G   0% /sys/firmware

Messages concerning ext4 filesystem in dmesg:
[Wed Nov 15 18:00:05 2023] EXT4-fs (md0): barriers disabled
[Wed Nov 15 18:00:05 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[Wed Nov 15 18:00:07 2023] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[Wed Nov 15 18:00:08 2023] EXT4-fs (md0): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET             SOURCE                                                                                                              FSTYPE OPTIONS
/                  /dev/vg2/volume_1[/@docker/btrfs/subvolumes/09dffbd202054221355666351eaac6b319b400c00c732f58fe9fa106a6f6ddc9]       btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/opt/iobroker    /dev/vg2/volume_1[/docker/iobroker1_data]                                                                           btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/etc/resolv.conf /dev/vg2/volume_1[/@docker/containers/028486a4b205d410539f43bd68ba301c328c01af9ee9251a6c3716fce2cc196e/resolv.conf] btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
|-/etc/hostname    /dev/vg2/volume_1[/@docker/containers/028486a4b205d410539f43bd68ba301c328c01af9ee9251a6c3716fce2cc196e/hostname]    btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50
`-/etc/hosts       /dev/vg2/volume_1[/@docker/containers/028486a4b205d410539f43bd68ba301c328c01af9ee9251a6c3716fce2cc196e/hosts]       btrfs  rw,relatime,ssd,synoacl,space_cache=v2,auto_reclaim_space,metadata_ratio=50

Files in neuralgic directories:

/var:
			 
				
15M     /var/
					
13M     /var/lib/dpkg
13M     /var/lib
12M     /var/lib/dpkg/info
1.9M    /var/cache



/opt/iobroker/backups:
48M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
363M    /opt/iobroker/iobroker-data/
215M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/states.jsonl
33M     /opt/iobroker/iobroker-data/objects.jsonl
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
												 
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
												
8.5M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

 
*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


 
nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 100
																			 
        100 /var/lib/dpkg/status

																	 
																					   
 
Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.16
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker1                                -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker1                                -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker1                                -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker1                                -  enabled
+ system.adapter.divera247.0              : divera247             : iobroker1                                -  enabled
  system.adapter.dwd.0                    : dwd                   : iobroker1                                -  enabled
+ system.adapter.email.0                  : email                 : iobroker1                                -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker1                                -  enabled
  system.adapter.fritzbox.0               : fritzbox              : iobroker1                                -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : iobroker1                                -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker1                                -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker1                                -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.info.0                   : info                  : iobroker1                                -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker1                                -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker1                                -  enabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : iobroker1                                -  enabled, port: 54321
+ system.adapter.net-tools.0              : net-tools             : iobroker1                                -  enabled
  system.adapter.openweathermap.0         : openweathermap        : iobroker1                                -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker1                                -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker1                                -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobroker1                                -  enabled
+ system.adapter.tr-064.0                 : tr-064                : iobroker1                                -  enabled
+ system.adapter.vesync.0                 : vesync                : iobroker1                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker1                                - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker1                                - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker1                                - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker1                                -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker1                                - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker1                                - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker1                                - disabled
  system.adapter.vis.0                    : vis                   : iobroker1                                -  enabled
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.worx.0                   : worx                  : iobroker1                                -  enabled
+ system.adapter.ws.0                     : ws                    : iobroker1                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : iobroker1                                -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker1                                -  enabled, port: 0
+ system.adapter.hm-rpc.3                 : hm-rpc                : iobroker1                                -  enabled, port: 0
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : iobroker1                                -  enabled, port: 54321
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker1                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
sources       : conf/sources-dist.json
online        : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.26.1   , installed 3.26.1
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "divera247"    : 0.2.0    , installed 0.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.2.0    , installed 1.2.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fullybrowser" : 3.0.6    , installed 2.2.0  [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.16   , installed 5.0.16
Adapter    "mihome-vacuum": 4.1.0    , installed 4.1.0
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.4.5   , installed 0.4.5
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vesync"       : 0.0.3    , installed 0.0.3
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.97.1   , installed 0.97.1
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        23731
States:         20046

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:8701            0.0.0.0:*               LISTEN      1000       192287449  -                   
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       192278619  -                   
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       192277686  -                   
tcp        0      0 0.0.0.0:9292            0.0.0.0:*               LISTEN      1000       192289429  -                   
tcp        0      0 0.0.0.0:2001            0.0.0.0:*               LISTEN      1000       192285535  -                   
tcp        0      0 0.0.0.0:2010            0.0.0.0:*               LISTEN      1000       192289513  -                   
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       192283699  -                   
tcp6       0      0 :::8084                 :::*                    LISTEN      1000       192302715  -                   
tcp6       0      0 :::8088                 :::*                    LISTEN      1000       192303709  -                   
udp        0      0 0.0.0.0:8472            0.0.0.0:*                           0          192256079  -                   
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1000       192475277  -                   

*** Log File - Last 25 Lines ***

2023-11-26 08:36:52.394  - error: host.iobroker1 Caught by controller[4]:  4: 0x7f6e5c7c247c Context2d::GetImageData(Nan::FunctionCallbackInfo<v8::Value> const&) [/opt/iobroker/node_modules/canvas/build/Release/canvas.node]
2023-11-26 08:36:52.395  - error: host.iobroker1 Caught by controller[5]:  5: 0x7f6e5c7b43d3  [/opt/iobroker/node_modules/canvas/build/Release/canvas.node]
2023-11-26 08:36:52.395  - error: host.iobroker1 Caught by controller[6]:  6: 0xdc4e00  [io.mihome-vacuum.0]
2023-11-26 08:36:52.395  - error: host.iobroker1 Caught by controller[7]:  7: 0xdc633f v8::internal::Builtin_HandleApiCall(int, unsigned long*, v8::internal::Isolate*) [io.mihome-vacuum.0]
2023-11-26 08:36:52.395  - error: host.iobroker1 Caught by controller[8]:  8: 0x1705c39  [io.mihome-vacuum.0]
2023-11-26 08:36:52.396  - warn: host.iobroker1 instance system.adapter.mihome-vacuum.0 terminated due to SIGABRT
2023-11-26 08:36:52.396  - info: host.iobroker1 instance system.adapter.mihome-vacuum.0 terminated with code null ()
2023-11-26 08:36:52.396  - info: host.iobroker1 Restart adapter system.adapter.mihome-vacuum.0 because enabled
2023-11-26 08:37:22.690  - info: host.iobroker1 instance system.adapter.mihome-vacuum.0 started with pid 3593
2023-11-26 08:37:36.323  - error: mihome-vacuum.0 (3593) YOUR DEVICE IS CONNECTED BUT DID NOT ANSWER YET - CONNECTION CAN TAKE UP TO 10 MINUTES - PLEASE BE PATIENT AND DO NOT TURN THE ADAPTER OFF
																																									
2023-11-26 08:37:37.416  - info: hm-rega.0 (635) pollingTrigger
2023-11-26 08:38:03.653  - error: host.iobroker1 Caught by controller[0]: FATAL ERROR: v8::ToLocalChecked Empty MaybeLocal.
2023-11-26 08:38:03.654  - error: host.iobroker1 Caught by controller[1]:  1: 0xb85bc0 node::Abort() [io.mihome-vacuum.0]
2023-11-26 08:38:03.654  - error: host.iobroker1 Caught by controller[2]:  2: 0xa94749 node::OOMErrorHandler(char const*, bool) [io.mihome-vacuum.0]
2023-11-26 08:38:03.654  - error: host.iobroker1 Caught by controller[3]:  3: 0xd66a2a v8::Utils::ReportApiFailure(char const*, char const*) [io.mihome-vacuum.0]
2023-11-26 08:38:03.655  - error: host.iobroker1 Caught by controller[3]:  4: 0x7f0b7846847c Context2d::GetImageData(Nan::FunctionCallbackInfo<v8::Value> const&) [/opt/iobroker/node_modules/canvas/build/Release/canvas.node]
2023-11-26 08:38:03.655  - error: host.iobroker1 Caught by controller[3]:  5: 0x7f0b7845a3d3  [/opt/iobroker/node_modules/canvas/build/Release/canvas.node]
2023-11-26 08:38:03.655  - error: host.iobroker1 Caught by controller[4]:  6: 0xdc4e00  [io.mihome-vacuum.0]
2023-11-26 08:38:03.655  - error: host.iobroker1 Caught by controller[5]:  7: 0xdc633f v8::internal::Builtin_HandleApiCall(int, unsigned long*, v8::internal::Isolate*) [io.mihome-vacuum.0]
2023-11-26 08:38:03.655  - error: host.iobroker1 Caught by controller[6]:  8: 0x1705c39  [io.mihome-vacuum.0]
															   
2023-11-26 08:38:03.656  - warn: host.iobroker1 instance system.adapter.mihome-vacuum.0 terminated due to SIGABRT
2023-11-26 08:38:03.656  - info: host.iobroker1 instance system.adapter.mihome-vacuum.0 terminated with code null ()
2023-11-26 08:38:03.656  - info: host.iobroker1 Restart adapter system.adapter.mihome-vacuum.0 because enabled
2023-11-26 08:38:17.891  - info: hm-rega.0 (635) pollingTrigger
2023-11-26 08:38:33.911  - info: host.iobroker1 instance system.adapter.mihome-vacuum.0 started with pid 4224

============ Mark until here for C&P =============

(Den Fully-Adapter habe ich übrigens extra noch auf 2.2.0, weil ichMQTT mit der 3.0.6 ad hoc auf den Displays nicht ans Laufen bekomme. Das Alte Display kann das eh nicht mehr)

======================= SUMMARY =======================
                        v.2023-10-10


model name      : Intel(R) Atom(TM) CPU  C2538  @ 2.40GHz
Kernel          : x86_64
Userland        : amd64
Docker          : v9.0.1

Installation:           Docker
Kernel:                 x86_64
Userland:               amd64
Timezone:               Etc/UTC
User-ID:                0
X-Server:               false


Pending OS-Updates:     0
Pending iob updates:    1

Nodejs-Installation:    /usr/bin/nodejs         v18.18.2
                        /usr/bin/node           v18.18.2
                        /usr/bin/npm            9.8.1
                        /usr/bin/npx            9.8.1
                        /usr/bin/corepack       0.19.0

Recommended versions are nodejs 18.18.2 and npm 9.8.1
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:             16G         15G        1.3G        243M         10G        1.3G
Swap:           2.1G        1.7G        461M
Total:           18G         17G        1.8G

Active iob-Instances:   29
Active repo(s): stable

ioBroker Core:          js-controller           5.0.16
                        admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.1                  : admin                 : iobroker1                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobroker1                                -  enabled, port: 8088, bind: 0.0.0.0, run as: admin

Objects:                23731
States:                 20046

Size of iob-Database:

33M     /opt/iobroker/iobroker-data/objects.jsonl
40M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Ich habe schonmal einen Vergleich zwischen den beiden Diags gemacht, mit dem Ergebnis, dass alles Negative wohl dankenswerterweise nun beseitigt ist.

Beim Starten des ioBrokers werde ich aber schon darauf hingewiesen, dass fritzbox.0 Ärger macht und ich mir das Log vor einem weiteren Restart ansehen soll.
Nachfolgend das Log, gefiltert auf den fritzbox.0-Adapter, ich meine, es steht dasselbe drin, wie zuvor:


fritzbox.0
2023-11-26 08:58:07.848	info	terminating

fritzbox.0
2023-11-26 08:58:07.346	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

fritzbox.0
2023-11-26 08:58:07.335	info	terminating

fritzbox.0
2023-11-26 08:58:07.280	error	Cannot read properties of undefined (reading 'startsWith')

fritzbox.0
2023-11-26 08:58:07.279	error	TypeError: Cannot read properties of undefined (reading 'startsWith') at /opt/iobroker/node_modules/iobroker.fritzbox/main.js:1440:73 at Parser.<anonymous> (/opt/iobroker/node_modules/iobroker.fritzbox/node_modules/xml2js/lib/parser.js:304:18) at Parser.emit (node:events:517:28) at SAXParser.onclosetag (/opt/iobroker/node_modules/iobroker.fritzbox/node_modules/xml2js/lib/parser.js:262:26) at emit (/opt/iobroker/node_modules/sax/lib/sax.js:625:35) at emitNode (/opt/iobroker/node_modules/sax/lib/sax.js:630:5) at closeTag (/opt/iobroker/node_modules/sax/lib/sax.js:890:7) at SAXParser.write (/opt/iobroker/node_modules/sax/lib/sax.js:1437:13) at exports.Parser.Parser.parseString (/opt/iobroker/node_modules/iobroker.fritzbox/node_modules/xml2js/lib/parser.js:323:31) at Parser.parseString (/opt/iobroker/node_modules/iobroker.fritzbox/node_modules/xml2js/lib/parser.js:5:59)

fritzbox.0
2023-11-26 08:58:07.276	error	uncaught exception: Cannot read properties of undefined (reading 'startsWith')

fritzbox.0
2023-11-26 08:58:03.057	warn	TR-064: Error reading files from dir /tam: Error: ENOENT: no such file or directory, scandir 'tam'

fritzbox.0
2023-11-26 08:58:02.890	info	Successfully connected to TR-064

fritzbox.0
2023-11-26 08:57:57.551	info	adapter connected to fritzbox: 192.168.1.100

fritzbox.0
2023-11-26 08:57:57.494	info	Trying to connect to TR-064: 192.168.1.100:49000

fritzbox.0
2023-11-26 08:57:57.491	info	try to connect: 192.168.1.100

fritzbox.0
2023-11-26 08:57:57.426	info	starting. Version 0.5.0 in /opt/iobroker/node_modules/iobroker.fritzbox, node: v18.18.2, js-controller: 5.0.16

fritzbox.0
2023-11-26 08:57:55.343	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

Der Host meint übrigens wieder, dass er von 5.0.16 auf 5.0.16 geupdated werden könnte.
Auch ein Restart des ioBrokers überzeugt ihn nicht von seinem Glück, dass er bereits aktuell ist.
(Beim letzten Mal - vorige Tage - war es am nachfolgenden Tag nicht mehr zu sehen.)

Der Staubsauger macht übrigens auch wieder das gleiche Theater. :-/
Ich hänge ihn (mihome-vacuum.0) hier der Vollständigkeit halber noch debug-mäßig mit an:


mihome-vacuum.0
2023-11-26 09:26:14.727	debug	Message= {"id":16,"method":"get_consumable"}

mihome-vacuum.0
2023-11-26 09:26:14.727	debug	Startup: setGetCleanSummary Answer: false

mihome-vacuum.0
2023-11-26 09:26:14.726	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:26:14.418	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:26:14.418	debug	Receive <<< Helo <<< 21310020000000000707a91265631695ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:26:12.725	debug	Message= {"id":15,"method":"get_clean_summary"}

mihome-vacuum.0
2023-11-26 09:26:12.724	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:26:10.723	debug	Message= {"id":14,"method":"get_sound_volume"}

mihome-vacuum.0
2023-11-26 09:26:10.722	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:26:08.721	debug	Message= {"id":13,"method":"get_network_info"}

mihome-vacuum.0
2023-11-26 09:26:08.719	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:26:06.718	debug	Message= {"id":12,"method":"get_status"}

mihome-vacuum.0
2023-11-26 09:26:06.717	debug	get params for stock Vacuum

mihome-vacuum.0
2023-11-26 09:26:04.415	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:26:04.414	debug	Receive <<< Helo <<< 21310020000000000707a9126563168bffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:25:54.411	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:25:54.409	debug	Receive <<< Helo <<< 21310020000000000707a91265631681ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:25:46.716	debug	Startup: setGetConsumable Answer: false

mihome-vacuum.0
2023-11-26 09:25:46.714	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:44.712	debug	Message= {"id":11,"method":"get_consumable"}

mihome-vacuum.0
2023-11-26 09:25:44.711	debug	Startup: setGetCleanSummary Answer: false

mihome-vacuum.0
2023-11-26 09:25:44.710	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:44.391	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:25:44.390	debug	Receive <<< Helo <<< 21310020000000000707a91265631677ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:25:42.708	debug	Message= {"id":10,"method":"get_clean_summary"}

mihome-vacuum.0
2023-11-26 09:25:42.708	debug	Startup: Delete getMultiMapsList

mihome-vacuum.0
2023-11-26 09:25:42.707	debug	Startup: getMultiMapsList Answer: true

mihome-vacuum.0
2023-11-26 09:25:42.707	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:40.703	debug	Message= {"id":9,"method":"get_multi_maps_list"}

mihome-vacuum.0
2023-11-26 09:25:40.701	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:38.699	debug	Message= {"id":8,"method":"get_sound_volume"}

mihome-vacuum.0
2023-11-26 09:25:38.698	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:36.696	debug	Message= {"id":7,"method":"get_network_info"}

mihome-vacuum.0
2023-11-26 09:25:36.692	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:35.215	info	settest next timer: not available

mihome-vacuum.0
2023-11-26 09:25:34.683	debug	Message= {"id":6,"method":"get_status"}

mihome-vacuum.0
2023-11-26 09:25:34.682	debug	get params for stock Vacuum

mihome-vacuum.0
2023-11-26 09:25:34.681	debug	Create State done!

mihome-vacuum.0
2023-11-26 09:25:34.680	debug	Create State for map: loadMap

mihome-vacuum.0
2023-11-26 09:25:34.679	debug	Create State for map: mapURL

mihome-vacuum.0
2023-11-26 09:25:34.679	debug	Create State for map: mapStatus

mihome-vacuum.0
2023-11-26 09:25:34.679	debug	Create State for map: actualMap

mihome-vacuum.0
2023-11-26 09:25:34.678	debug	Create State for map: map64

mihome-vacuum.0
2023-11-26 09:25:34.640	debug	Create State for map:

mihome-vacuum.0
2023-11-26 09:25:34.634	debug	Create State for Queue: queue

mihome-vacuum.0
2023-11-26 09:25:34.514	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }

mihome-vacuum.0
2023-11-26 09:25:34.494	info	select standard vacuum protocol....

mihome-vacuum.0
2023-11-26 09:25:34.493	debug	DeviceModel selected to: roborock.vacuum.s5

mihome-vacuum.0
2023-11-26 09:25:34.492	warn	No Answer for DeviceModel use old one

mihome-vacuum.0
2023-11-26 09:25:34.492	error	YOUR DEVICE IS CONNECTED BUT DID NOT ANSWER YET - CONNECTION CAN TAKE UP TO 10 MINUTES - PLEASE BE PATIENT AND DO NOT TURN THE ADAPTER OFF

mihome-vacuum.0
2023-11-26 09:25:34.491	debug	Get Device data..4

mihome-vacuum.0
2023-11-26 09:25:34.491	debug	GETMODELFROMAPI:Data: {}

mihome-vacuum.0
2023-11-26 09:25:34.490	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:34.382	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:25:34.382	debug	Receive <<< Helo <<< 21310020000000000707a9126563166dffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:25:32.485	debug	Message= {"id":5,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:25:32.485	debug	Get Device data..3

mihome-vacuum.0
2023-11-26 09:25:32.484	debug	GETMODELFROMAPI:Data: {}

mihome-vacuum.0
2023-11-26 09:25:32.483	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:30.481	debug	Message= {"id":4,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:25:30.480	debug	Get Device data..2

mihome-vacuum.0
2023-11-26 09:25:30.480	debug	GETMODELFROMAPI:Data: {}

mihome-vacuum.0
2023-11-26 09:25:30.479	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:28.475	debug	Message= {"id":3,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:25:28.474	debug	Get Device data..1

mihome-vacuum.0
2023-11-26 09:25:28.474	debug	GETMODELFROMAPI:Data: {}

mihome-vacuum.0
2023-11-26 09:25:28.473	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:26.471	debug	Message= {"id":2,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:25:26.471	debug	Get Device data..0

mihome-vacuum.0
2023-11-26 09:25:26.470	debug	GETMODELFROMAPI:Data: {}

mihome-vacuum.0
2023-11-26 09:25:26.469	debug	your device is connected, but didn't answer yet - sometime connection is broken and can take up to 10 Minutes

mihome-vacuum.0
2023-11-26 09:25:24.462	debug	Message= {"id":1,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:25:24.453	debug	GETMODELFROMAPI: objModel: {"val":"roborock.vacuum.s5","ack":true,"ts":1700987084613,"q":0,"from":"system.adapter.mihome-vacuum.0","user":"system.user.admin","lc":1669663806090}

mihome-vacuum.0
2023-11-26 09:25:24.378	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:25:24.375	debug	MAIN: Connected to device, try to get model..

mihome-vacuum.0
2023-11-26 09:25:24.374	debug	Receive <<< Helo <<< 21310020000000000707a91265631663ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:25:24.362	debug	server started on 0.0.0.0:53421

mihome-vacuum.0
2023-11-26 09:25:24.357	info	IOT enabled, create state

mihome-vacuum.0
2023-11-26 09:25:24.348	debug	MIIO: Config: ip:192.168.1.41 token: 436559496bXXXXXXXXX

mihome-vacuum.0
2023-11-26 09:25:24.346	debug	Create State for deviceInfounsupported

mihome-vacuum.0
2023-11-26 09:25:24.345	debug	Create State for deviceInfowifi_signal

mihome-vacuum.0
2023-11-26 09:25:24.343	debug	Create State for deviceInfofw_ver

mihome-vacuum.0
2023-11-26 09:25:24.342	debug	Create State for deviceInfomodel

mihome-vacuum.0
2023-11-26 09:25:24.341	debug	Create State for deviceInfomac

mihome-vacuum.0
2023-11-26 09:25:24.340	debug	Create State for deviceInfo

mihome-vacuum.0
2023-11-26 09:25:24.288	debug	load Map creator... true

mihome-vacuum.0
2023-11-26 09:25:24.184	info	starting. Version 4.1.0 in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v18.18.2, js-controller: 5.0.16

mihome-vacuum.0
2023-11-26 09:25:23.615	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

mihome-vacuum.0
2023-11-26 09:25:23.599	debug	Plugin sentry Initialize Plugin (enabled=true)

mihome-vacuum.0
2023-11-26 09:25:23.470	debug	States connected to redis: 127.0.0.1:9000

mihome-vacuum.0
2023-11-26 09:25:23.292	debug	States create User PubSub Client

mihome-vacuum.0
2023-11-26 09:25:23.291	debug	States create System PubSub Client

mihome-vacuum.0
2023-11-26 09:25:23.223	debug	Redis States: Use Redis connection: 127.0.0.1:9000

mihome-vacuum.0
2023-11-26 09:25:23.070	debug	Objects connected to redis: 127.0.0.1:9001

mihome-vacuum.0
2023-11-26 09:25:23.059	debug	Objects client initialize lua scripts

mihome-vacuum.0
2023-11-26 09:25:22.831	debug	Objects create User PubSub Client

mihome-vacuum.0
2023-11-26 09:25:22.829	debug	Objects create System PubSub Client

mihome-vacuum.0
2023-11-26 09:25:22.719	debug	Objects client ready ... initialize now

mihome-vacuum.0
2023-11-26 09:25:21.705	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

mihome-vacuum.0
2023-11-26 09:24:45.858	debug	Message= {"id":21,"method":"get_clean_record","params":[1700314076]}

mihome-vacuum.0
2023-11-26 09:24:45.857	debug	MIIO RECIVE: {"result":[[1700317501,1700318356,769,13972500,0,0,3,1]],"id":20}

mihome-vacuum.0
2023-11-26 09:24:45.856	debug	MIIO MESSAGE TESTING: {"result":[[1700317501,1700318356,769,13972500,0,0,3,1]],"id":20}

mihome-vacuum.0
2023-11-26 09:24:45.835	debug	Message= {"id":20,"method":"get_clean_record","params":[1700317501]}

mihome-vacuum.0
2023-11-26 09:24:45.833	debug	MIIO RECIVE: {"result":[[1700403901,1700405572,1671,31715000,0,1,3,1]],"id":19}

mihome-vacuum.0
2023-11-26 09:24:45.831	debug	MIIO MESSAGE TESTING: {"result":[[1700403901,1700405572,1671,31715000,0,1,3,1]],"id":19}

mihome-vacuum.0
2023-11-26 09:24:45.813	debug	Message= {"id":19,"method":"get_clean_record","params":[1700403901]}

mihome-vacuum.0
2023-11-26 09:24:45.812	debug	MIIO RECIVE: {"result":[[1700486701,1700488361,1660,31490000,0,1,3,1]],"id":18}

mihome-vacuum.0
2023-11-26 09:24:45.811	debug	MIIO MESSAGE TESTING: {"result":[[1700486701,1700488361,1660,31490000,0,1,3,1]],"id":18}

mihome-vacuum.0
2023-11-26 09:24:45.801	debug	Message= {"id":18,"method":"get_clean_record","params":[1700486701]}

mihome-vacuum.0
2023-11-26 09:24:45.800	debug	MIIO RECIVE: {"result":[[1700573101,1700574894,1793,31385000,0,1,3,1]],"id":17}

mihome-vacuum.0
2023-11-26 09:24:45.799	debug	MIIO MESSAGE TESTING: {"result":[[1700573101,1700574894,1793,31385000,0,1,3,1]],"id":17}

mihome-vacuum.0
2023-11-26 09:24:45.797	debug	MIIO MESSAGE TESTING: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":16}

mihome-vacuum.0
2023-11-26 09:24:45.796	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":16}

mihome-vacuum.0
2023-11-26 09:24:45.795	debug	MIIO MESSAGE TESTING: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":16}

mihome-vacuum.0
2023-11-26 09:24:45.773	debug	Message= {"id":17,"method":"get_clean_record","params":[1700573101]}

mihome-vacuum.0
2023-11-26 09:24:45.772	debug	MIIO MESSAGE TESTING: {"result":[[1700659501,1700661175,1674,31800000,0,1,3,1]],"id":15}

mihome-vacuum.0
2023-11-26 09:24:45.771	debug	MIIO RECIVE: {"result":[[1700659501,1700661175,1674,31800000,0,1,3,1]],"id":15}

mihome-vacuum.0
2023-11-26 09:24:45.770	debug	MIIO MESSAGE TESTING: {"result":[[1700659501,1700661175,1674,31800000,0,1,3,1]],"id":15}

mihome-vacuum.0
2023-11-26 09:24:45.767	debug	Message= {"id":16,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-11-26 09:24:45.766	info	create state for carpet_mode

mihome-vacuum.0
2023-11-26 09:24:45.765	debug	MIIO MESSAGE TESTING: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":14}

mihome-vacuum.0
2023-11-26 09:24:45.764	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":14}

mihome-vacuum.0
2023-11-26 09:24:45.763	debug	MIIO MESSAGE TESTING: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":14}

mihome-vacuum.0
2023-11-26 09:24:45.761	debug	Message= {"id":15,"method":"get_clean_record","params":[1700659501]}

mihome-vacuum.0
2023-11-26 09:24:45.760	debug	MIIO MESSAGE TESTING: {"result":[[1700745900,1700747612,1712,31885000,0,1,3,1]],"id":13}

mihome-vacuum.0
2023-11-26 09:24:45.760	debug	MIIO RECIVE: {"result":[[1700745900,1700747612,1712,31885000,0,1,3,1]],"id":13}

mihome-vacuum.0
2023-11-26 09:24:45.759	debug	MIIO MESSAGE TESTING: {"result":[[1700745900,1700747612,1712,31885000,0,1,3,1]],"id":13}

mihome-vacuum.0
2023-11-26 09:24:45.757	debug	Message= {"id":14,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-11-26 09:24:45.755	debug	Startup: Delete setGetConsumable

mihome-vacuum.0
2023-11-26 09:24:45.755	debug	Startup: setGetConsumable Answer: true

mihome-vacuum.0
2023-11-26 09:24:45.753	debug	MIIO MESSAGE TESTING: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":12}

mihome-vacuum.0
2023-11-26 09:24:45.752	debug	MIIO RECIVE: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":12}

mihome-vacuum.0
2023-11-26 09:24:45.751	debug	MIIO MESSAGE TESTING: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":12}

mihome-vacuum.0
2023-11-26 09:24:45.749	debug	Message= {"id":13,"method":"get_clean_record","params":[1700745900]}

mihome-vacuum.0
2023-11-26 09:24:45.748	debug	MIIO MESSAGE TESTING: {"result":[[1700832301,1700834121,1820,31445000,0,1,3,1]],"id":11}

mihome-vacuum.0
2023-11-26 09:24:45.748	debug	MIIO RECIVE: {"result":[[1700832301,1700834121,1820,31445000,0,1,3,1]],"id":11}

mihome-vacuum.0
2023-11-26 09:24:45.747	debug	MIIO MESSAGE TESTING: {"result":[[1700832301,1700834121,1820,31445000,0,1,3,1]],"id":11}

mihome-vacuum.0
2023-11-26 09:24:45.745	debug	Message= {"id":12,"method":"get_consumable"}

mihome-vacuum.0
2023-11-26 09:24:45.744	debug	Startup: Delete setGetCleanSummary

mihome-vacuum.0
2023-11-26 09:24:45.744	debug	Startup: setGetCleanSummary Answer: true

mihome-vacuum.0
2023-11-26 09:24:45.742	debug	MIIO MESSAGE TESTING: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":10}

mihome-vacuum.0
2023-11-26 09:24:45.740	debug	MIIO RECIVE: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":10}

mihome-vacuum.0
2023-11-26 09:24:45.739	debug	MIIO MESSAGE TESTING: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":10}

mihome-vacuum.0
2023-11-26 09:24:45.724	debug	Message= {"id":11,"method":"get_clean_record","params":[1700832301]}

mihome-vacuum.0
2023-11-26 09:24:45.722	debug	MIIO MESSAGE TESTING: {"result":[[1700918701,1700920380,1679,31117500,0,1,3,1]],"id":9}

mihome-vacuum.0
2023-11-26 09:24:45.721	debug	MIIO RECIVE: {"result":[[1700918701,1700920380,1679,31117500,0,1,3,1]],"id":9}

mihome-vacuum.0
2023-11-26 09:24:45.720	debug	MIIO MESSAGE TESTING: {"result":[[1700918701,1700920380,1679,31117500,0,1,3,1]],"id":9}

mihome-vacuum.0
2023-11-26 09:24:45.711	debug	Message= {"id":10,"method":"get_clean_summary"}

mihome-vacuum.0
2023-11-26 09:24:45.710	debug	Startup: Delete getMultiMapsList

mihome-vacuum.0
2023-11-26 09:24:45.710	debug	Startup: getMultiMapsList Answer: true

mihome-vacuum.0
2023-11-26 09:24:45.709	debug	MIIO MESSAGE TESTING: {"result":"unknown_method","id":8}

mihome-vacuum.0
2023-11-26 09:24:45.708	debug	MIIO RECIVE: {"result":"unknown_method","id":8}

mihome-vacuum.0
2023-11-26 09:24:45.707	debug	MIIO MESSAGE TESTING: {"result":"unknown_method","id":8}

mihome-vacuum.0
2023-11-26 09:24:45.705	debug	Message= {"id":9,"method":"get_clean_record","params":[1700918701]}

mihome-vacuum.0
2023-11-26 09:24:45.702	debug	MIIO MESSAGE TESTING: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":7}

mihome-vacuum.0
2023-11-26 09:24:45.701	debug	MIIO RECIVE: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":7}

mihome-vacuum.0
2023-11-26 09:24:45.700	debug	MIIO MESSAGE TESTING: {"result":[2925029,52405125000,1837,[1700918701,1700832301,1700745900,1700659501,1700573101,1700486701,1700403901,1700317501,1700314076,1700227501,1700141101,1700054701,1699968301,1699881901,1699799101,1699712701,1699622701,1699536301,1699449901,1699363501]],"id":7}

mihome-vacuum.0
2023-11-26 09:24:45.696	debug	Message= {"id":8,"method":"get_multi_maps_list"}

mihome-vacuum.0
2023-11-26 09:24:45.695	debug	MIIO MESSAGE TESTING: {"result":[73],"id":6}

mihome-vacuum.0
2023-11-26 09:24:45.693	debug	MIIO RECIVE: {"result":[73],"id":6}

mihome-vacuum.0
2023-11-26 09:24:45.692	debug	MIIO MESSAGE TESTING: {"result":[73],"id":6}

mihome-vacuum.0
2023-11-26 09:24:45.689	debug	Message= {"id":7,"method":"get_clean_summary"}

mihome-vacuum.0
2023-11-26 09:24:45.684	debug	Message= {"id":6,"method":"get_sound_volume"}

mihome-vacuum.0
2023-11-26 09:24:45.622	debug	MIIO RECIVE: {"result":{"ssid":"Papi1","ip":"192.168.1.41","mac":"40:31:3c:aa:51:97","bssid":"e8:df:70:b8:a1:44","rssi":-57},"id":5}

mihome-vacuum.0
2023-11-26 09:24:45.619	debug	MIIO MESSAGE TESTING: {"result":{"ssid":"Papi1","ip":"192.168.1.41","mac":"40:31:3c:aa:51:97","bssid":"e8:df:70:b8:a1:44","rssi":-57},"id":5}

mihome-vacuum.0
2023-11-26 09:24:45.607	debug	MIIO MESSAGE TESTING: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":4}

mihome-vacuum.0
2023-11-26 09:24:45.605	debug	MIIO RECIVE: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":4}

mihome-vacuum.0
2023-11-26 09:24:45.604	debug	MIIO MESSAGE TESTING: {"result":[{"main_brush_work_time":1294324,"side_brush_work_time":420918,"filter_work_time":806724,"filter_element_work_time":0,"sensor_dirty_time":420768}],"id":4}

mihome-vacuum.0
2023-11-26 09:24:45.591	debug	Message= {"id":5,"method":"get_network_info"}

mihome-vacuum.0
2023-11-26 09:24:45.589	debug	Message= {"id":4,"method":"get_consumable"}

mihome-vacuum.0
2023-11-26 09:24:45.588	debug	MIIO RECIVE: {"result":[],"id":3}

mihome-vacuum.0
2023-11-26 09:24:45.586	debug	MIIO MESSAGE TESTING: {"result":[],"id":3}

mihome-vacuum.0
2023-11-26 09:24:45.570	debug	Message= {"id":3,"method":"get_room_mapping"}

mihome-vacuum.0
2023-11-26 09:24:45.545	info	settest next timer: not available

mihome-vacuum.0
2023-11-26 09:24:45.142	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }

mihome-vacuum.0
2023-11-26 09:24:45.134	info	create states for water box

mihome-vacuum.0
2023-11-26 09:24:45.132	info	change states from State control.fan_power

mihome-vacuum.0
2023-11-26 09:24:45.131	debug	setGetStatus {"msg_ver":3,"msg_seq":502,"state":8,"battery":100,"clean_time":1679,"clean_area":31117500,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":1,"lab_status":1,"water_box_status":0,"fan_power":104,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-11-26 09:24:45.129	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":502,"state":8,"battery":100,"clean_time":1679,"clean_area":31117500,"error_code":0,"map_present":1,"in_cleaning":0,"in_returning":0,"in_fresh_state":1,"lab_status":1,"water_box_status":0,"fan_power":104,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":2}

mihome-vacuum.0
2023-11-26 09:24:45.128	debug	MIIO MESSAGE TESTING: {"result":[{"msg_ver":3,"msg_seq":502,"state":8,"battery":100,"clean_time":1679,"clean_area":31117500,"error_code":0,"map_present":1,"in_cleaning":0,"in_returning":0,"in_fresh_state":1,"lab_status":1,"water_box_status":0,"fan_power":104,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":2}

mihome-vacuum.0
2023-11-26 09:24:45.119	debug	Message= {"id":2,"method":"get_status"}

mihome-vacuum.0
2023-11-26 09:24:45.118	debug	get params for stock Vacuum

mihome-vacuum.0
2023-11-26 09:24:45.117	debug	Create State done!

mihome-vacuum.0
2023-11-26 09:24:45.115	debug	Create State for map: loadMap

mihome-vacuum.0
2023-11-26 09:24:45.114	debug	Create State for map: mapURL

mihome-vacuum.0
2023-11-26 09:24:45.113	debug	Create State for map: mapStatus

mihome-vacuum.0
2023-11-26 09:24:45.113	debug	Create State for map: actualMap

mihome-vacuum.0
2023-11-26 09:24:45.112	debug	Create State for map: map64

mihome-vacuum.0
2023-11-26 09:24:45.074	debug	Create State for map:

mihome-vacuum.0
2023-11-26 09:24:45.067	debug	Create State for Queue: queue

mihome-vacuum.0
2023-11-26 09:24:44.730	debug	Search can't be optimized because wildcard not at the end, fallback to keys!: function(doc) { if (doc.type === 'state') emit(doc._id, doc) }

mihome-vacuum.0
2023-11-26 09:24:44.690	info	select standard vacuum protocol....

mihome-vacuum.0
2023-11-26 09:24:44.682	debug	DeviceModel selected to: roborock.vacuum.s5

mihome-vacuum.0
2023-11-26 09:24:44.565	debug	Get Device data from robot.. {"hw_ver":"Linux","fw_ver":"3.5.7_002008","ap":{"ssid":"Papi1","bssid":"E8:DF:70:B8:A1:44","rssi":-57},"netif":{"localIp":"192.168.1.41","mask":"255.255.255.0","gw":"192.168.1.100"},"model":"roborock.vacuum.s5","mac":"40:31:3C:AA:51:97","token":"436559496bXXXXXX":27167}

mihome-vacuum.0
2023-11-26 09:24:44.564	debug	Get Device data..0

mihome-vacuum.0
2023-11-26 09:24:44.562	debug	GETMODELFROMAPI:Data: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.5.7_002008","ap":{"ssid":"Papi1","bssid":"E8:DF:70:B8:A1:44","rssi":-57},"netif":{"localIp":"192.168.1.41","mask":"255.255.255.0","gw":"192.168.1.100"},"model":"roborock.vacuum.s5","mac":"40:31:3C:AA:51:97","token":"436559496bXXXXXX":27167}}

mihome-vacuum.0
2023-11-26 09:24:44.560	debug	MIIO RECIVE: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.5.7_002008","ap":{"ssid":"Papi1","bssid":"E8:DF:70:B8:A1:44","rssi":-57},"netif":{"localIp":"192.168.1.41","mask":"255.255.255.0","gw":"192.168.1.100"},"model":"roborock.vacuum.s5","mac":"40:31:3C:AA:51:97","token":"436559496b50444c32686a316a6d3737","life":27167}}

mihome-vacuum.0
2023-11-26 09:24:44.558	debug	MIIO MESSAGE TESTING: {"partner_id":"","id":1,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.5.7_002008","ap":{"ssid":"Papi1","bssid":"E8:DF:70:B8:A1:44","rssi":-57},"netif":{"localIp":"192.168.1.41","mask":"255.255.255.0","gw":"192.168.1.100"},"model":"roborock.vacuum.s5","mac":"40:31:3C:AA:51:97","token":"436559496b50444c32686a316a6d3737","life":27167}}

mihome-vacuum.0
2023-11-26 09:24:44.542	debug	Message= {"id":1,"method":"miIO.info"}

mihome-vacuum.0
2023-11-26 09:24:44.540	debug	GETMODELFROMAPI: objModel: {"val":"roborock.vacuum.s5","ack":true,"ts":1700986820893,"q":0,"from":"system.adapter.mihome-vacuum.0","user":"system.user.admin","lc":1669663806090}

mihome-vacuum.0
2023-11-26 09:24:44.456	debug	Time difference between Mihome Vacuum and ioBroker: 5487 sec

mihome-vacuum.0
2023-11-26 09:24:44.452	debug	MAIN: Connected to device, try to get model..

mihome-vacuum.0
2023-11-26 09:24:44.450	debug	Receive <<< Helo <<< 21310020000000000707a9126563163bffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-11-26 09:24:44.429	debug	server started on 0.0.0.0:53421

mihome-vacuum.0
2023-11-26 09:24:44.423	info	IOT enabled, create state

mihome-vacuum.0
2023-11-26 09:24:44.417	debug	MIIO: Config: ip:192.168.1.41 token: 436559496bXXXXXXXXX

mihome-vacuum.0
2023-11-26 09:24:44.415	debug	Create State for deviceInfounsupported

mihome-vacuum.0
2023-11-26 09:24:44.415	debug	Create State for deviceInfowifi_signal

mihome-vacuum.0
2023-11-26 09:24:44.414	debug	Create State for deviceInfofw_ver

mihome-vacuum.0
2023-11-26 09:24:44.413	debug	Create State for deviceInfomodel

mihome-vacuum.0
2023-11-26 09:24:44.413	debug	Create State for deviceInfomac

mihome-vacuum.0
2023-11-26 09:24:44.412	debug	Create State for deviceInfo

mihome-vacuum.0
2023-11-26 09:24:44.367	debug	load Map creator... true

mihome-vacuum.0
2023-11-26 09:24:44.285	info	starting. Version 4.1.0 in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v18.18.2, js-controller: 5.0.16

mihome-vacuum.0
2023-11-26 09:24:44.049	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

mihome-vacuum.0
2023-11-26 09:24:44.041	debug	Plugin sentry Initialize Plugin (enabled=true)

mihome-vacuum.0
2023-11-26 09:24:43.940	debug	States connected to redis: 127.0.0.1:9000

mihome-vacuum.0
2023-11-26 09:24:43.763	debug	States create User PubSub Client

mihome-vacuum.0
2023-11-26 09:24:43.761	debug	States create System PubSub Client

mihome-vacuum.0
2023-11-26 09:24:43.681	debug	Redis States: Use Redis connection: 127.0.0.1:9000

mihome-vacuum.0
2023-11-26 09:24:43.534	debug	Objects connected to redis: 127.0.0.1:9001

mihome-vacuum.0
2023-11-26 09:24:43.517	debug	Objects client initialize lua scripts

mihome-vacuum.0
2023-11-26 09:24:43.274	debug	Objects create User PubSub Client

mihome-vacuum.0
2023-11-26 09:24:43.272	debug	Objects create System PubSub Client

mihome-vacuum.0
2023-11-26 09:24:43.269	debug	Objects client ready ... initialize now

mihome-vacuum.0
2023-11-26 09:24:43.165	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

Die Ports sind natürlich auch alle wieder durchgereicht (1012, 1880,1883, 2001, 8081, 8088, 8282, 8284, 49000, 49443 (alle TCP)).

So, ich muss nun wieder los, ich kann wohl erst morgen Abend wieder reinsehen, ob sich hier etwas getan hat. Also keinen Stress und auch jetzt schon wieder 1000 Dank!

Papi 0

@Codierknecht
Jetzt habe ich es:
Zwar hatte ich den Adapter schon mehrfach erfolglos gelöscht, gedowngraded, und geupdated, aber jetzt, nachdem ich den ioBroker mit Deiner freundlichen Hilfe repariert habe, habe ich aus lauter Langeweile den Adapter nochmal gelöscht und wieder angelegt, jetzt funktioniert er plötzlich! Ihm haben wohl ständig irgendwelche Grundvoraussetzungen gefehlt, die er nun verfügbar hat.
Dasselbe hat ich dann auch gleich mit dem Staubsauger ausprobiert, mit selbem Ergebnis, alles läuft jetzt einwandfrei!

Vielen Dank für alles!

Codierknecht

@papi-0 sagte in Fritzbox-Adapter startet nicht:

alles läuft jetzt einwandfrei!

Prima!
Dann sei bitte so nett und markiere Deinen Beitrag als "gelöst".
Dazu den Eingangspost bearbeiten und ein "[gelöst] - " vor den Titel setzen.

Community Forum

NEWS

[gelöst] - Fritzbox-Adapter startet nicht

Support us

500

32.7k

82.4k

1.3m