Zigbee Adapter startet nicht mehr

anselra

mag sein ich hatte aber keinen anderen Ansatz als es so zu Lösen.
Falls du einen anderen Lösungsansatz hast gerne her damit habe das System auf einer anderen platte installiert und somit noch vorhanden

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

Falls du einen anderen Lösungsansatz hast

Ohne Meldungen aus dem System natürlich nicht.

anselra

@thomas-braun

waren noch welche offen die ich nicht bereitgestellt habe?

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

nicht zum laufen gebracht.

ist halt keine Aussage mit der man irgendwas anfangen könnte.

anselra

@thomas-braun

könntest du konkret werden? du hast davon gesprochen das es ohne Meldungen schwer ist, was vollkommen richtig ist! Allerdings hast du auch keine angefragt die ich nicht zurück gemeldet habe.
Was genau ist jetzt dein Thema?

Thomas Braun

@anselra

Gib mal die vollständige Ausgabe von

iob diag

zum Besten.

anselra

@thomas-braun

das hat folgendes ausgespuckt

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi4-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 16:21:03 up 2 min,  2 users,  load average: 0.62, 0.35, 0.14
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2023-10-28 16:21:04 CEST
           Universal time: Sat 2023-10-28 14:21:04 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        544M        3.3G        1.2M        254M        3.4G
Swap:           104M          0B        104M
Total:          4.1G        544M        3.4G

         3793 M total memory
          519 M used memory
          521 M active memory
           79 M inactive memory
         3101 M free memory
           21 M buffer memory
          221 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       57G  2.8G   52G   6% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Oct 28 16:18:39 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:8D:C3:A3 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=5aa7add2-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Oct 28 16:18:42 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Oct 28 16:18:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
510M    /var/
202M    /var/cache
196M    /var/cache/apt
159M    /var/lib
130M    /var/lib/apt/lists

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
26M     /opt/iobroker/iobroker-data/
22M     /opt/iobroker/iobroker-data/files
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.8M    /opt/iobroker/iobroker-data/objects.jsonl
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.10.1 [Updatable]
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        172
States:         126

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 11

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15611      689/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16481      681/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16474      681/iobroker.js-con
tcp6       0      0 :::22                   :::*                    LISTEN      0          15622      689/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15687      725/io.admin.0
udp        0      0 0.0.0.0:46103           0.0.0.0:*                           104        14563      535/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        14561      535/avahi-daemon: r
udp6       0      0 :::39506                :::*                                104        14564      535/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        14562      535/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-10-28 16:19:21.027  - info: admin.0 (725) <== Disconnect system.user.admin from ::ffff:192.168.0.134 admin
2023-10-28 16:19:21.218  - info: admin.0 (725) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:19:21.223  - info: admin.0 (725) <== Disconnect system.user.admin from ::ffff:192.168.0.134 admin
2023-10-28 16:19:22.932  - info: admin.0 (725) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:20:03.442  - info: admin.0 (725) <== Disconnect system.user.admin from ::ffff:192.168.0.134 admin
2023-10-28 16:20:04.701  - info: admin.0 (725) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:20:11.292  - info: admin.0 (725) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:20:11.566  - error: zigbee.0 (788) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-10-28 16:20:11.844  - info: zigbee.0 (788) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if03","vendorId":"0451","productId":"bef3"}]
2023-10-28 16:20:34.566  - info: admin.0 (725) <== Disconnect system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:20:37.443  - info: admin.0 (725) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:20:37.549  - error: zigbee.0 (788) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-10-28 16:20:37.820  - info: zigbee.0 (788) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if03","vendorId":"0451","productId":"bef3"}]

============ Mark until here for C&P =============

iob diag has finished.

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

Pending Updates: 11

Zieh die mal rein.

Und dann zeig nochmal einen kompletten Kaltstart des zigbee-Adapters.
Und die Einstellungen des Adapters.

anselra

@thomas-braun

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi4-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 16:40:33 up 2 min,  2 users,  load average: 0.26, 0.22, 0.09
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sat 2023-10-28 16:40:33 CEST
           Universal time: Sat 2023-10-28 14:40:33 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        498M        3.3G        1.2M        242M        3.5G
Swap:           104M          0B        104M
Total:          4.1G        498M        3.4G

         3793 M total memory
          476 M used memory
          475 M active memory
           68 M inactive memory
         3155 M free memory
           21 M buffer memory
          209 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       57G  2.8G   52G   6% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Oct 28 16:38:27 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:8D:C3:A3 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=5aa7add2-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Oct 28 16:38:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Oct 28 16:38:32 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
533M    /var/
209M    /var/cache
203M    /var/cache/apt
159M    /var/lib
130M    /var/lib/apt/lists

Archived and active journals take up 64.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
30M     /opt/iobroker/iobroker-data/
22M     /opt/iobroker/iobroker-data/files
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
7.6M    /opt/iobroker/iobroker-data/objects.jsonl
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.10.1 [Updatable]
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        172
States:         126

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14691      689/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14751      680/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       14758      680/iobroker.js-con
tcp6       0      0 :::22                   :::*                    LISTEN      0          14693      689/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       16541      724/io.admin.0
udp        0      0 0.0.0.0:36003           0.0.0.0:*                           104        14643      535/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        14641      535/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        14642      535/avahi-daemon: r
udp6       0      0 :::55452                :::*                                104        14644      535/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-10-28 16:38:08.012  - info: admin.0 (724) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:38:09.611  - info: host.iobroker instance system.adapter.discovery.0 started with pid 806
2023-10-28 16:38:12.001  - info: zigbee.0 (787) starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.18.2, js-controller: 5.0.12
2023-10-28 16:38:12.162  - info: zigbee.0 (787) Starting Zigbee  npm ...
2023-10-28 16:38:12.245  - info: discovery.0 (806) starting. Version 3.1.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.18.2, js-controller: 5.0.12
2023-10-28 16:38:12.668  - info: zigbee.0 (787) Installed Version: iobroker.zigbee@1.8.23
2023-10-28 16:38:13.276  - error: zigbee.0 (787) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00'"
2023-10-28 16:38:13.277  - error: zigbee.0 (787) Failed to start Zigbee
2023-10-28 16:38:13.278  - error: zigbee.0 (787) Error herdsman start
2023-10-28 16:38:13.621  - info: host.iobroker instance system.adapter.backitup.0 started with pid 830
2023-10-28 16:38:15.999  - info: backitup.0 (830) starting. Version 2.8.1 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.18.2, js-controller: 5.0.12
2023-10-28 16:38:16.097  - info: backitup.0 (830) [iobroker] backup will be activated at 02:40 every 1 day(s)
2023-10-28 16:38:23.282  - info: zigbee.0 (787) Try to reconnect. 1 attempts left
2023-10-28 16:38:23.284  - info: zigbee.0 (787) Starting Zigbee  npm ...
2023-10-28 16:38:23.334  - info: zigbee.0 (787) Installed Version: iobroker.zigbee@1.8.23
2023-10-28 16:38:23.667  - error: zigbee.0 (787) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00'"
2023-10-28 16:38:23.668  - error: zigbee.0 (787) Failed to start Zigbee
2023-10-28 16:38:23.670  - error: zigbee.0 (787) Error herdsman start
2023-10-28 16:39:09.804  - info: admin.0 (724) <== Disconnect system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:39:09.820  - info: admin.0 (724) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:39:09.826  - info: admin.0 (724) <== Disconnect system.user.admin from ::ffff:192.168.0.134 admin
2023-10-28 16:39:09.879  - info: admin.0 (724) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:39:11.223  - info: admin.0 (724) <== Disconnect system.user.admin from ::ffff:192.168.0.134 admin
2023-10-28 16:39:11.359  - info: admin.0 (724) ==> Connected system.user.admin from ::ffff:192.168.0.134
2023-10-28 16:39:18.894  - info: admin.0 (724) <== Disconnect system.user.admin from ::ffff:192.168.0.134

Update ist durch und nach Reboot folgende Zigbee Meldungen

zigbee.0
2023-10-28 16:38:23.670	error	Error herdsman start

zigbee.0
2023-10-28 16:38:23.668	error	Failed to start Zigbee

zigbee.0
2023-10-28 16:38:23.667	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00'"

zigbee.0
2023-10-28 16:38:23.334	info	Installed Version: iobroker.zigbee@1.8.23

zigbee.0
2023-10-28 16:38:23.284	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 16:38:23.282	info	Try to reconnect. 1 attempts left

zigbee.0
2023-10-28 16:38:13.278	error	Error herdsman start

zigbee.0
2023-10-28 16:38:13.277	error	Failed to start Zigbee

zigbee.0
2023-10-28 16:38:13.276	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00'"

zigbee.0
2023-10-28 16:38:12.668	info	Installed Version: iobroker.zigbee@1.8.23

zigbee.0
2023-10-28 16:38:12.162	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 16:38:12.001	info	starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.18.2, js-controller: 5.0.12

zigbee.0
2023-10-28 16:37:47.901	warn	Failed to stop zigbee during startup

zigbee.0
2023-10-28 16:37:41.769	info	Zigbee: disabling joining new devices.

zigbee.0
2023-10-28 16:37:41.763	info	cleaned everything up.

und noch die Einstellungen

Meister Mopper

@anselra sagte in Zigbee Adapter startet nicht mehr:

Ich habe es mit Bookworm lite und:

Ich hatte dasselbe Problem auch.

thomas@rpizigbee:~ $ apt policy udev
udev:
  Installiert:           252.17-1~deb12u1
  Installationskandidat: 252.17-1~deb12u1
  Versionstabelle:
 *** 252.17-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        100 /var/lib/dpkg/status

So habe ich es gestern auch eingerichtet, und der Zigbee wurde partout nicht grün.

Also habe ich direkt in der Konsole den entsprechenden Wert rauskopiert:

thomas@rpizigbee:~ $ ls -lah /dev/serial/by-id
insgesamt 0
drwxr-xr-x 2 root root 100 27. Okt 17:56 .
drwxr-xr-x 4 root root  80 27. Okt 17:56 ..
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if03 -> ../../ttyACM1

, als

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00

in die Einstellungen der Instanz eingefügt, und die Verbindung ist geglückt.

Ich war mir sicher, dass exakt diese Bezeichnung vorher auch drin stand, aber wie war das nochmal mit Teufel und Eichhörnchen.

Thomas Braun

@anselra

fuser -mv /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

fuser -mv `readlink -f /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00`

anselra

@thomas-braun

pi@iobroker:~ $ fuser -mv /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00
                     USER        PID ACCESS COMMAND
/dev/ttyACM0:        root     kernel mount /dev
pi@iobroker:~ $ fuser -mv `readlink -f /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00`
                     USER        PID ACCESS COMMAND
/dev/ttyACM0:        root     kernel mount /dev


zigbee.0
2023-10-28 17:03:25.648	error	Error herdsman start

zigbee.0
2023-10-28 17:03:25.647	error	Failed to start Zigbee

zigbee.0
2023-10-28 17:03:25.645	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2023-10-28 17:03:25.306	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 17:03:25.278	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 17:03:25.276	info	Try to reconnect. 1 attempts left

zigbee.0
2023-10-28 17:03:15.274	error	Error herdsman start

zigbee.0
2023-10-28 17:03:15.273	error	Failed to start Zigbee

zigbee.0
2023-10-28 17:03:15.272	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

zigbee.0
2023-10-28 17:02:54.320	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 17:02:53.826	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 17:02:53.819	info	delete old Backup files. keep only last 10

zigbee.0
2023-10-28 17:02:53.634	info	starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83) in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.18.2, js-controller: 5.0.12

zigbee.0
2023-10-28 17:02:50.476	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

anselra

@meister-mopper said in Zigbee Adapter startet nicht mehr:

@anselra sagte in Zigbee Adapter startet nicht mehr:

Ich habe es mit Bookworm lite und:

Ich hatte dasselbe Problem auch.
thomas@rpizigbee:~ $ apt policy udev
udev:
  Installiert:           252.17-1~deb12u1
  Installationskandidat: 252.17-1~deb12u1
  Versionstabelle:
 *** 252.17-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        100 /var/lib/dpkg/status
So habe ich es gestern auch eingerichtet, und der Zigbee wurde partout nicht grün.

Also habe ich direkt in der Konsole den entsprechenden Wert rauskopiert:
thomas@rpizigbee:~ $ ls -lah /dev/serial/by-id
insgesamt 0
drwxr-xr-x 2 root root 100 27. Okt 17:56 .
drwxr-xr-x 4 root root  80 27. Okt 17:56 ..
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root  13 27. Okt 17:56 usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if03 -> ../../ttyACM1
, als

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.13__Embed_with_CMSIS-DAP_L1100MSJ-if00

in die Einstellungen der Instanz eingefügt, und die Verbindung ist geglückt.

Ich war mir sicher, dass exakt diese Bezeichnung vorher auch drin stand, aber wie war das nochmal mit Teufel und Eichhörnchen.

Hat bei mir leider nichts gebracht, ich kopiere alles immer aus meiner Install doku

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

ich kopiere alles immer aus meiner Install doku

Kopier es lieber aus der Konsole.

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00

Wo bei die Meldung bei einem falschen Dateinamen eine andere wäre.

anselra

@thomas-braun

habs nochmal alles neu raus kopiert


zigbee.0
2023-10-28 17:14:15.866	error	Error herdsman start

zigbee.0
2023-10-28 17:14:15.865	error	Failed to start Zigbee

zigbee.0
2023-10-28 17:14:15.863	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2023-10-28 17:14:15.445	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 17:14:15.372	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 17:14:15.370	info	Try to reconnect. 1 attempts left

zigbee.0
2023-10-28 17:14:05.368	error	Error herdsman start

zigbee.0
2023-10-28 17:14:05.367	error	Failed to start Zigbee

zigbee.0
2023-10-28 17:14:05.366	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

zigbee.0
2023-10-28 17:13:44.744	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 17:13:44.178	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 17:13:44.173	info	delete old Backup files. keep only last 10

zigbee.0
2023-10-28 17:13:43.935	info	starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83) in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.18.2, js-controller: 5.0.12

zigbee.0
2023-10-28 17:13:43.564	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

zigbee.0
2023-10-28 17:13:34.018	info	debug devices set to []

zigbee.0
2023-10-28 17:13:33.927	info	terminating

zigbee.0
2023-10-28 17:13:33.926	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

zigbee.0
2023-10-28 17:13:33.923	info	terminating

zigbee.0
2023-10-28 17:13:33.922	warn	Failed to stop zigbee during startup

zigbee.0
2023-10-28 17:13:33.872	info	Zigbee: disabling joining new devices.

zigbee.0
2023-10-28 17:13:33.129	info	cleaned everything up...

zigbee.0
2023-10-28 17:13:33.126	info	Got terminate signal TERMINATE_YOURSELF

zigbee.0
2023-10-28 17:13:23.941	info	List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100GZZ","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.15__Embed_with_CMSIS-DAP_L1100GZZ-if03","vendorId":"0451","productId":"bef3"}]

zigbee.0
2023-10-28 17:13:23.559	error	getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

"Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

Das ist gerne was aus der Firmware-Ecke.

anselra

@thomas-braun

möchte ungern jetzt was an der Firmware machen, hab noch Sticks die versuche ich mal.
melde mich

anselra

@thomas-braun

na was soll ich sagen, mit dem Zigbee CC2531 USB Dongle geht es mit dem dev Board CC26X2R1 nicht.
Mal schauen was für Firmware wo drauf ist falls man das findet

Thomas Braun

@anselra sagte in Zigbee Adapter startet nicht mehr:

CC26X2R1

https://www.zigbee2mqtt.io/guide/adapters/flashing/flashing_via_uniflash.html

anselra

@thomas-braun

update gemacht dev Board CC26X2R1 auf Z-Stack_3.x.0 coordinator 20230507


zigbee.0
2023-10-28 19:10:12.178	error	Error herdsman start

zigbee.0
2023-10-28 19:10:12.178	error	Failed to start Zigbee

zigbee.0
2023-10-28 19:10:12.177	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2023-10-28 19:10:11.815	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 19:10:11.785	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 19:10:11.783	info	Try to reconnect. 1 attempts left

zigbee.0
2023-10-28 19:10:01.781	error	Error herdsman start

zigbee.0
2023-10-28 19:10:01.780	error	Failed to start Zigbee

zigbee.0
2023-10-28 19:10:01.779	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

zigbee.0
2023-10-28 19:09:41.317	info	Installed Version: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83

zigbee.0
2023-10-28 19:09:40.896	info	Starting Zigbee npm ...

zigbee.0
2023-10-28 19:09:40.893	info	delete old Backup files. keep only last 10

zigbee.0
2023-10-28 19:09:40.708	info	starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee#e233808d509f6fc4ddb3176d79633f4492146a83) in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.18.2, js-controller: 5.0.12

zigbee.0
2023-10-28 19:09:40.385	info	Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system

zigbee.0
2023-10-28 19:09:31.457	info	terminating

zigbee.0
2023-10-28 19:09:31.431	info	debug devices set to []

zigbee.0
2023-10-28 19:09:31.351	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

zigbee.0
2023-10-28 19:09:31.350	info	terminating

zigbee.0
2023-10-28 19:09:31.349	warn	Failed to stop zigbee during startup

zigbee.0
2023-10-28 19:09:31.285	info	Zigbee: disabling joining new devices.

zigbee.0
2023-10-28 19:09:30.951	info	cleaned everything up...

zigbee.0
2023-10-28 19:09:30.949	info	Got terminate signal TERMINATE_YOURSELF

leider das gleiche Ergebnis

Bezeichnung wurde angepasst im Adapter
usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GZZ-if00 -> ../../ttyACM0

NEWS

Zigbee Adapter startet nicht mehr

Support us

363
Online

31.6k
Users

79.5k
Topics

1.3m
Posts

NEWS

Zigbee Adapter startet nicht mehr

Support us

363Online

31.6kUsers

79.5kTopics

1.3mPosts

363
Online

31.6k
Users

79.5k
Topics

1.3m
Posts