UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[splatterjoe]

@homoran sagte in [gelöst] Hilfe bei Multihost:

@splatterjoe was hast du jetzt genacht?
leider hast du nicht iob diag während des Problems gezeigt.

Kurz gesagt: Ich hatte ein paar Probleme mit meinen Adaptern auf dem Slave und habe deshalb entschlossen den Umzug von SD-Karte auf USB-Stick vorzunehmen. Während dessen habe ich alles mal aktualisiert bevor ich meinen neuen Slave (frische Installation) mit dem Master verbinden wollte. Dies scheiterte jedoch...

Lang:

1. Thread Adapter-Probleme
2. Thread Multihost funktioniert nicht mehr

Vielleicht helfen die Daten aus dem ersten Thread etwas

[LxFFM]

Hallo zusammen,

ich habe zwar keine Erfahrung mit Multihost, ich wollte aber gerade einen Slave einrichten. Ich bin auch der Anleitung gefolgt und bei mir funktioniert auch nichts.

Auf v5.0.12 kommt auch kein prompt weder auf dem Master bei "multihost enable" noch auf dem slave bei "multihost browse". Es blink einfach till infinity.

Ich habe auch alles neugestartet, aber da passiert einfach nichts.

LG
Alex

[Homoran]

@lxffm sagte in [gelöst] Hilfe bei Multihost:

Ich bin auch der Anleitung gefolgt und bei mir funktioniert auch nichts.

danke für die ausführlichen Informationen!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

was sagt iob diag?

[LxFFM]

@homoran

hier der Master:

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: iobroker
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.15.76-v7l+
      Architecture: arm

Model		: Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 17:25:40 up 14 min,  1 user,  load average: 1.24, 1.64, 1.31
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred
~ Throttling has occurred
~ Soft temperature limit has occurred

*** Time and Time Zones ***
               Local time: Thu 2023-10-12 17:25:41 CEST
           Universal time: Thu 2023-10-12 15:25:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
alex
/home/alex
alex adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: 	false
Desktop: 	
Terminal: 	tty
Boot Target: 	multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.9G        2.4G        5.0G        1.0M        571M        5.9G
Swap:            99M          0B         99M
Total:          8.0G        2.4G        5.1G

         7898 M total memory
         2364 M used memory
          222 M active memory
         2561 M inactive memory
         4963 M free memory
           87 M buffer memory
          483 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      234G   26G  196G  12% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   51M  202M  21% /boot
tmpfs          tmpfs     790M   20K  790M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Oct 12 17:11:33 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:DB:22:B8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=eac8eb14-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Oct 12 17:11:34 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Thu Oct 12 17:11:34 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Oct 12 17:11:38 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
5.2G	/var/
4.2G	/var/log
3.4G	/var/log/journal/5a78654a3c664c9492f4a0b21e52c254
3.4G	/var/log/journal
623M	/var/lib

Archived and active journals take up 3.3G in the file system.

/opt/iobroker/backups:
2.8G	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
6.5G	/opt/iobroker/iobroker-data/
5.6G	/opt/iobroker/iobroker-data/history
574M	/opt/iobroker/iobroker-data/files
134M	/opt/iobroker/iobroker-data/backup-objects
88M	/opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
45M	/opt/iobroker/iobroker-data/objects.jsonl
31M	/opt/iobroker/iobroker-data/states.jsonl
23M	/opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M	/opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M	/opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0023-if00-port0

*** NodeJS-Installation ***

/home/iobroker/.diag.sh: line 277: nodejs: command not found
 	
/usr/bin/node 		v16.18.1
/usr/bin/npm 		8.19.2
/usr/bin/npx 		8.19.2
/usr/bin/corepack 	0.14.1
/home/iobroker/.diag.sh: line 288: nodejs: command not found
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 16.18.1-deb-1nodesource1
  Candidate: 16.20.2-deb-1nodesource1
  Version table:
     16.20.2-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
 *** 16.18.1-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.12
admin: 		6.10.1
javascript: 	7.1.4

Adapters from github: 	2

Adapter State
  system.adapter.accuweather.0            : accuweather           : iobroker                                 - disabled
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.daikin.0                 : daikin                : iobroker                                 -  enabled
+ system.adapter.daikin.1                 : daikin                : iobroker                                 -  enabled
+ system.adapter.daikin.2                 : daikin                : iobroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.echarts.0                : echarts               : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 -  enabled
+ system.adapter.geofency.0               : geofency              : iobroker                                 -  enabled, port: 7999, bind: 0.0.0.0
  system.adapter.govee.0                  : govee                 : iobroker                                 - disabled
+ system.adapter.heizoel.0                : heizoel               : iobroker                                 -  enabled
+ system.adapter.history.0                : history               : iobroker                                 -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker                                 -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hue-extended.0           : hue-extended          : iobroker                                 -  enabled
+ system.adapter.hue-extended.1           : hue-extended          : iobroker                                 -  enabled
  system.adapter.hue.0                    : hue                   : iobroker                                 - disabled, port: 80
  system.adapter.hue.1                    : hue                   : iobroker                                 - disabled, port: 80
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker                                 -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : iobroker                                 -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : iobroker                                 -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 -  enabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : iobroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker                                 -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker                                 -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
  system.adapter.jarvis.0                 : jarvis                : iobroker                                 - disabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.meater.0                 : meater                : iobroker                                 - disabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : iobroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : iobroker                                 -  enabled, port: 54321
+ system.adapter.net-tools.0              : net-tools             : iobroker                                 -  enabled
  system.adapter.oilfox.0                 : oilfox                : iobroker                                 -  enabled
  system.adapter.parser.0                 : parser                : iobroker                                 - disabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker                                 -  enabled
+ system.adapter.pushover.1               : pushover              : iobroker                                 -  enabled
+ system.adapter.rest-api.0               : rest-api              : iobroker                                 -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.simple-api.0             : simple-api            : iobroker                                 - disabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartgarden.0            : smartgarden           : iobroker                                 -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iobroker                                 -  enabled
+ system.adapter.sonos.0                  : sonos                 : iobroker                                 -  enabled
+ system.adapter.statistics.0             : statistics            : iobroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : iobroker                                 - disabled
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
  system.adapter.vis-bars.0               : vis-bars              : iobroker                                 -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : iobroker                                 -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : iobroker                                 -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker                                 -  enabled
  system.adapter.vis-history.0            : vis-history           : iobroker                                 -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-lcars.0              : vis-lcars             : iobroker                                 -  enabled
  system.adapter.vis-map.0                : vis-map               : iobroker                                 -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : iobroker                                 -  enabled
  system.adapter.vis-metro.0              : vis-metro             : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 -  enabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker                                 - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.geofency.0               : geofency              : iobroker                                 -  enabled, port: 7999, bind: 0.0.0.0
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker                                 -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : iobroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : iobroker                                 -  enabled, port: 54321
+ system.adapter.rest-api.0               : rest-api              : iobroker                                 -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.3.1    , installed 1.3.1
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Adapter    "alexa2"       : 3.25.2   , installed 3.25.2
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "daikin"       : 1.4.2    , installed 1.4.2
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "geofency"     : 1.2.4    , installed 1.2.4
Adapter    "heizoel"      : 1.0.3    , installed 1.0.3
Adapter    "history"      : 2.2.6    , installed 2.2.6
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "hue"          : 3.10.0   , installed 3.10.0
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lgtv"         : 1.1.12   , installed 1.1.12
Adapter    "linkeddevices": 1.5.5    , installed 1.5.5
Adapter    "logparser"    : 2.2.0    , installed 2.2.0
Adapter    "meater"       : 1.0.2    , installed 1.0.2
Adapter    "mihome-vacuum": 4.0.0    , installed 4.0.0
Adapter    "moma"         : 1.2.9    , installed 1.2.9
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "oilfox"       : 4.2.0    , installed 4.2.0
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "pvforecast"   : 2.8.1    , installed 2.8.1
Adapter    "rest-api"     : 1.1.0    , installed 1.1.0
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartgarden"  : 2.0.0    , installed 2.0.0
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "synology"     : 3.0.0    , installed 3.0.0
Adapter    "systeminfo"   : 1.1.0    , installed 1.1.0
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "text2command" : 3.0.2    , installed 3.0.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.96.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-lcars"    : 1.1.1    , installed 1.1.1
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.5    , installed 2.5.5

Objects and States
Please stand by - This may take a while
Objects: 	46154
States: 	34976

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Get:2 https://repos.influxdata.com/debian bullseye InRelease [7040 B]
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:4 https://deb.nodesource.com/node_16.x bullseye InRelease
Err:2 https://repos.influxdata.com/debian bullseye InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Fetched 7040 B in 1s (5888 B/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 300

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN      0          12076      583/vncserver-x11-c 
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       14746      988/iobroker.js-con 
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       14739      988/iobroker.js-con 
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        14115      460/influxd         
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       20082      1469/io.shelly.0    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14082      585/sshd: /usr/sbin 
tcp        0      0 10.0.3.10:2001          0.0.0.0:*               LISTEN      1001       19059      1264/io.hm-rpc.0    
tcp        0      0 10.0.3.10:2010          0.0.0.0:*               LISTEN      1001       18289      1332/io.hm-rpc.1    
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          13123      562/cupsd           
tcp6       0      0 :::4369                 :::*                    LISTEN      0          10046      1/init              
tcp6       0      0 :::5900                 :::*                    LISTEN      0          12075      583/vncserver-x11-c 
tcp6       0      0 :::7999                 :::*                    LISTEN      1001       20659      1343/io.geofency.0  
tcp6       0      0 :::8093                 :::*                    LISTEN      1001       22072      1561/io.rest-api.0  
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       20162      1550/io.web.0       
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       17490      1156/io.admin.0     
tcp6       0      0 :::8086                 :::*                    LISTEN      999        14302      460/influxd         
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          13122      562/cupsd           
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       19114      1289/io.sonos.0     
tcp6       0      0 :::22                   :::*                    LISTEN      0          14084      585/sshd: /usr/sbin 
udp        0      0 0.0.0.0:50005           0.0.0.0:*                           1001       22180      988/iobroker.js-con 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13200      501/dhcpcd          
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          14106      591/cups-browsed    
udp        0      0 0.0.0.0:41634           0.0.0.0:*                           108        13067      403/avahi-daemon: r 
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       20593      1281/io.mihome-vacu 
udp        0      0 0.0.0.0:53422           0.0.0.0:*                           1001       19222      1447/io.mihome-vacu 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13065      403/avahi-daemon: r 
udp6       0      0 :::546                  :::*                                0          13227      501/dhcpcd          
udp6       0      0 :::59023                :::*                                108        13068      403/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                108        13066      403/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2023-10-12 17:27:07.210  - info: hue-extended.1 (1750) State value to set for "hue-extended.1.schedules.5f974b42-548e-40a2-bff9-39d_g2_2-18.status" has to be type "boolean" but received type "string" 
2023-10-12 17:27:07.211  - info: hue-extended.1 (1750) State value to set for "hue-extended.1.schedules.1a39f1e6-0aeb-4e09-8f48-cbd_g2_2-19.status" has to be type "boolean" but received type "string" 
2023-10-12 17:27:07.289  - info: hue-extended.1 (1750) State value to set for "hue-extended.1.rules.xfdani_2__2_5f974b42-548e-40a2-b-19.timestriggered" has to be type "string" but received type "number" 
2023-10-12 17:27:07.332  - info: hue-extended.0 (1591) State value to set for "hue-extended.0.sensors.motion_sensor_küche_light-44.state.lightlevel" has to be type "string" but received type "number" 
2023-10-12 17:27:10.003  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:13.616  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:13.721  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:13.727  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:15.002  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:17.113  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:20.006  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:20.302  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:21.469  - info: shelly.0 (1469) [MQTT] Device with client id "shellyplusplugs-80646fcfb4b4" connected!
2023-10-12 17:27:25.012  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:25.183  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:27.679  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:30.003  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:31.548  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:35.001  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:35.176  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:38.699  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:40.001  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:42.388  - info: smartmeter.0 (1354) Received 5 values, 3 updated
2023-10-12 17:27:45.002  - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables
2023-10-12 17:27:46.085  - info: smartmeter.0 (1354) Received 5 values, 3 updated

Hier der Slave

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: iobroker-slave
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model		: Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 17:28:05 up 28 min,  3 users,  load average: 0.03, 0.04, 0.07
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-10-12 17:28:05 CEST
           Universal time: Thu 2023-10-12 15:28:05 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
alex
/home/alex
alex adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: 	true
Desktop: 	
Terminal: 	tty
Boot Target: 	graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        192M        6.9G         35M        682M        7.5G
Swap:            99M          0B         99M
Total:          7.9G        192M        7.0G

         7812 M total memory
          192 M used memory
          364 M active memory
          345 M inactive memory
         6937 M free memory
           45 M buffer memory
          636 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      235G  4.3G  221G   2% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs     782M   20K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Oct 12 16:59:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:0A:F9:25 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=7e26ae88-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Oct 12 16:59:53 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Thu Oct 12 16:59:53 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Oct 12 16:59:56 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
557M	/var/
205M	/var/log
201M	/var/log/journal/c4ab7a6b431b42cb9ff9d507a658a12d
201M	/var/log/journal
129M	/var/cache

Archived and active journals take up 200.0M in the file system.

/opt/iobroker/backups:
4.0K	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
19M	/opt/iobroker/iobroker-data/
15M	/opt/iobroker/iobroker-data/files
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
6.3M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.8M	/opt/iobroker/iobroker-data/objects.jsonl
2.8M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
652K	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs 	v18.18.1
/usr/bin/node 		v18.18.1
/usr/bin/npm 		9.8.1
/usr/bin/npx 		9.8.1
/usr/bin/corepack 	0.19.0


nodejs:
  Installed: 18.18.1-1nodesource1
  Candidate: 18.18.1-1nodesource1
  Version table:
 *** 18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.12
admin: 		6.10.1
javascript: 	"javascript" not found

Adapters from github: 	0

Adapter State
  system.adapter.admin.0                  : admin                 : iobroker-slave                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : iobroker-slave                           -  enabled
  system.adapter.discovery.0              : discovery             : iobroker-slave                           -  enabled

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : iobroker-slave                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Controller "js-controller": 5.0.12   , installed 5.0.12

Objects and States
Please stand by - This may take a while
Objects: 	143
States: 	105

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12993      577/sshd: /usr/sbin 
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14179      546/cupsd           
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14178      546/cupsd           
tcp6       0      0 :::22                   :::*                    LISTEN      0          12995      577/sshd: /usr/sbin 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15541      470/dhcpcd          
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15378      595/cups-browsed    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        1792       397/avahi-daemon: r 
udp        0      0 0.0.0.0:46787           0.0.0.0:*                           108        1794       397/avahi-daemon: r 
udp6       0      0 :::546                  :::*                                0          16727      470/dhcpcd          
udp6       0      0 :::5353                 :::*                                108        1793       397/avahi-daemon: r 
udp6       0      0 :::52918                :::*                                108        1795       397/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2023-10-12 17:08:11.696  - info: admin.0 (961) terminating http server on port 8081
2023-10-12 17:08:11.698  - info: backitup.0 (1252) cleaned everything up...
2023-10-12 17:08:11.695  - info: host.iobroker-slave stopInstance system.adapter.admin.0 (force=false, process=true)
2023-10-12 17:08:11.696  - info: host.iobroker-slave stopInstance system.adapter.discovery.0 (force=false, process=true)
2023-10-12 17:08:11.697  - info: host.iobroker-slave stopInstance system.adapter.backitup.0 (force=false, process=true)
2023-10-12 17:08:11.719  - info: discovery.0 (1218) Got terminate signal TERMINATE_YOURSELF
2023-10-12 17:08:11.723  - info: backitup.0 (1252) Got terminate signal TERMINATE_YOURSELF
2023-10-12 17:08:11.723  - info: admin.0 (961) Got terminate signal TERMINATE_YOURSELF
2023-10-12 17:08:11.727  - info: host.iobroker-slave stopInstance system.adapter.admin.0 send kill signal
2023-10-12 17:08:11.730  - info: host.iobroker-slave stopInstance system.adapter.discovery.0 send kill signal
2023-10-12 17:08:11.730  - info: host.iobroker-slave stopInstance system.adapter.backitup.0 send kill signal
2023-10-12 17:08:11.732  - info: backitup.0 (1252) terminating
2023-10-12 17:08:11.732  - info: admin.0 (961) terminating
2023-10-12 17:08:11.735  - info: backitup.0 (1252) Terminated (NO_ERROR): Without reason
2023-10-12 17:08:11.734  - info: admin.0 (961) Terminated (NO_ERROR): Without reason
2023-10-12 17:08:11.770  - info: discovery.0 (1218) terminating
2023-10-12 17:08:11.772  - info: discovery.0 (1218) Terminated (NO_ERROR): Without reason
2023-10-12 17:08:12.200  - info: discovery.0 (1218) terminating
2023-10-12 17:08:12.208  - info: backitup.0 (1252) terminating
2023-10-12 17:08:12.209  - info: admin.0 (961) terminating
2023-10-12 17:08:12.308  - info: host.iobroker-slave instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2023-10-12 17:08:12.343  - info: host.iobroker-slave instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2023-10-12 17:08:12.387  - info: host.iobroker-slave instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR)
2023-10-12 17:08:12.388  - info: host.iobroker-slave All instances are stopped.
2023-10-12 17:08:12.522  - info: host.iobroker-slave terminated

[Homoran]

@lxffm sagte in [gelöst] Hilfe bei Multihost:

/usr/bin/nodejs v18.18.1

mit der Version sollte es gefixt sein.
Allerdings hat dein Master noch eine alte Node Version

[LxFFM]

@homoran

Also sollte ich wohl das Update gemäß der Anleitung auf dem Master machen?

[Homoran]

@lxffm sagte in [gelöst] Hilfe bei Multihost:

@homoran

Also sollte ich wohl das Update gemäß der Anleitung auf dem Master machen?

weil das ja vieeel zu kompliziert ist, hat @Thomas-Braun das jetzt in ein fertiges node-fixer skript gegossen

[Thomas Braun]

@lxffm

Der Master hat auch ein Thema bei der Spannungsversorgung:

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred
~ Throttling has occurred
~ Soft temperature limit has occurred

sowie beim influxdb-Repo:

W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E

sowie bei den Updates:

Pending Updates: 300

Der Slave hat ein Thema mit der graphischen Oberfläche:

*** X-Server-Setup ***
X-Server: 	true
Desktop: 	
Terminal: 	tty
Boot Target: 	graphical.target

und mit failed services:

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

[LxFFM]

@thomas-braun

Ich vermute mal die Updates kann ich mit
apt-get update und upgrade beheben korrekt?

Ich weiß allerdings nicht wie ich diesen influxDB-Repo Fehler und die Graphische Obeflächen Fehler beheben soll?

Die Spannungsversorgung kann ich mir mal anschauen aber der hängt an einer Power Supply die ich mit dem Raspi beim Raspishop als Set gekauft habe sollte also gut passend dimensioniert sein und hängt sogar an einer USV.

Aber mal eine dumme Frage zum Slave. Ich habe auf dem Slave nur ioBroker installiert, aber nicht eingerichtet. Muss ich den vorher einrichten? Ich dachte als Slave bekommt er ohnehin alle Daten vom Master? das würde vermtl die Failed Services erklären oder?

Ich habe NodeJS zwischenzeitlich gemäß Anleitung geupdated auf dem Master, beide sind jetzt auf v18.18.1

LG
Alex

[Homoran]

@lxffm sagte in [gelöst] Hilfe bei Multihost:

aber nicht eingerichtet.

alles richtig gemacht. du hättest sogar alle Adapter löschen können.

der controller läuft aber

EDIT:
heissen beide Hosts iobroker?

[LxFFM]

@homoran nein ich hatte den slave bei der RasPi Installation iobroker-slave genannt.

Aber auch nach dem NodeJS Update durfte ich nochmal die "Secret Passphrase anlegen" und danach hat er sich wieder tot geblinkt

alex@iobroker:~ $ iobroker multihost enable
Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host.
Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly.
Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag
Discovery authentication activated.
Enter secret phrase for connection: 
Repeat secret phrase for connection: 
Please check the binding of the configured jsonl server to allow remote connections.
Please restart ioBroker for the changes to take effect: "iobroker restart"


Multihost discovery server: enabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 0.0.0.0
States:                     jsonl on 0.0.0.0

[pjo123456]

@lxffm Hast du denn das Downgrade vom js-controller auf 5.0.11 gemacht?
Und beim Slave musste ich auf 4.0.24 gehen.

[LxFFM]

@pjo123456

Nein ich bekomme das nicht hin

Ich bin nicht so der Linux crack und weiß nicht was mir das sagen soll.

alex@iobroker-slave:~ $ npm install iobroker.js-controller@5.0.11 --production
npm WARN config production Use `--omit=dev` instead.

added 3 packages, removed 4 packages, changed 19 packages, and audited 306 packages in 39s

13 packages are looking for funding
  run `npm fund` for details

6 vulnerabilities (1 low, 4 moderate, 1 high)

To address issues that do not require attention, run:
  npm audit fix

To address all issues (including breaking changes), run:
  npm audit fix --force

Run `npm audit` for details.

alex@iobroker-slave:~ $ iobroker version
5.0.12

[pjo123456]

@lxffm du musst zuerst in das Verzeichnis dem Befehl:

cd /opt/iobroker

wechseln. Und danach mit npm die ältere Version installieren.

[Thomas Braun]

@lxffm

Du stehst im falschen Verzeichnis. Du hast das jetzt um Home von alex installiert.

Mit

cd /opt/iobroker
npm install iobroker.js-controller@5.0.11 --omit=dev

ginge es.

[LxFFM]

@thomas-braun said in [gelöst] Hilfe bei Multihost:

cd /opt/iobroker

Danke euch das war der Fehler für das Downgrade.

Jetzt habe ich die Versionen entsprechend gedowngraded.
Jetzt funktionieren auch beide Befehle, wir nähern uns der Lösung.

Jetzt allerdings ein weiteres Problem.
Auf meinem Master sind zwei Netzwerkinterfaces am laufen. Das WIFI mit DHCP IP (10.0.1.250 aktuell) und der ETH Adapter mit fester IP (10.0.3.10). Der Browse Befehl am Slave findet jetzt nur die DHCP IP. Ich vermute das ist nicht so clever ihn darüber zu verbinden.

alex@iobroker-slave:/opt/iobroker $ iobroker multihost browse
1 |          10.0.1.250 |  host |          10.0.1.250 | "authentication required"
alex@iobroker-slave:/opt/iobroker $ iobroker multihost connect
1 |          10.0.1.250 |  host |          10.0.1.250 | "authentication required"

[LxFFM]

OK das habe ich selbst gelöst bekommen. Habe das WIFI Interface down genommen und dann hat er den Master auf dem anderen Interface gefunden.

Zusammengefasst also folgende Fehler vorhanden:

• Master ist auf 5.0.12 bugged
• Slave ist auf allem über 4.0.24 bugged
• Die browse Routine bricht beim ersten Interface ab und findet nicht das zweite Interface

[heinz527]

Ich habe gestern auch versucht einen Slave aufzusetzen und zu koppeln. Nur Dank der Beiträge hier hat es geklappt.

• Master läuft mit: 5.0.16
• Slave lief nur mit 4.0.24 (wie @LxFFM geschrieben hat) sonst wird kein Master gefunden!

Bisher habe ich noch keine Adapter auf dem Slave. War erstmal froh, dass es läuft

[LxFFM]

@Homoran @Thomas-Braun

Gibt es einen Weg nach vorne für einen Fix? Muss man das noch irgendwo als Bug reporten?

Ich bin zwar nicht so tief im Maschinenraum von ioBroker, aber es fühlt sich nicht gut an, wenn man für einen Master-Slave Betrieb auf zwei bestimmte Versionen angewiesen ist, die auch noch in unterschiedlichen Major Releases liegen. Außerdem muss man sich vor jedem Update Sorgen machen, das die Master-Slave Verbindung mit dem Update bricht.

So kann man auf dem Slave ja keine verlässlichen Services betreiben.

[Homoran]

@lxffm sagte in [gelöst] Hilfe bei Multihost:

Gibt es einen Weg nach vorne für einen Fix?

sollte mittlerweile längst gelöst sein.

klappt es auch über den Standardweg mit iob setup custom nicht?
Master und Slave neu gestartet?
ggf. 2x?

der Bug bezog sich nur auf neue Multihost Konstrukte.
Bestehende waren nie betroffen