[gelöst] Hilfe bei Multihost
-
Hallo zusammen,
wie @Homoran bereits verlinkte, habe ich das gleich Problem mit Multihost gehabt. Besten Dank für den Hinweis auf diesen Thread erst einmal an dich.
Einen weiteren Dank für die Lösung in diesem Thread. Mein beschriebener Fehler besteht nun nicht mehr und mein Multihost-System kann wieder laufen. Danke euch
Beste Grüße und einen schönen Abend
-
@splatterjoe was hast du jetzt genacht?
leider hast du nicht iob diag während des Problems gezeigt. -
@homoran sagte in [gelöst] Hilfe bei Multihost:
@splatterjoe was hast du jetzt genacht?
leider hast du nicht iob diag während des Problems gezeigt.Kurz gesagt: Ich hatte ein paar Probleme mit meinen Adaptern auf dem Slave und habe deshalb entschlossen den Umzug von SD-Karte auf USB-Stick vorzunehmen. Während dessen habe ich alles mal aktualisiert bevor ich meinen neuen Slave (frische Installation) mit dem Master verbinden wollte. Dies scheiterte jedoch...
Lang:
- Thread Adapter-Probleme
- Thread Multihost funktioniert nicht mehr
Vielleicht helfen die Daten aus dem ersten Thread etwas
-
Hallo zusammen,
ich habe zwar keine Erfahrung mit Multihost, ich wollte aber gerade einen Slave einrichten. Ich bin auch der Anleitung gefolgt und bei mir funktioniert auch nichts.
Auf v5.0.12 kommt auch kein prompt weder auf dem Master bei "multihost enable" noch auf dem slave bei "multihost browse". Es blink einfach till infinity.
Ich habe auch alles neugestartet, aber da passiert einfach nichts.
LG
Alex -
@lxffm sagte in [gelöst] Hilfe bei Multihost:
Ich bin auch der Anleitung gefolgt und bei mir funktioniert auch nichts.
danke für die ausführlichen Informationen!
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1was sagt
iob diag? -
hier der Master:
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.76-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 17:25:40 up 14 min, 1 user, load average: 1.24, 1.64, 1.31 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Thu 2023-10-12 17:25:41 CEST Universal time: Thu 2023-10-12 15:25:41 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** alex /home/alex alex adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 2.4G 5.0G 1.0M 571M 5.9G Swap: 99M 0B 99M Total: 8.0G 2.4G 5.1G 7898 M total memory 2364 M used memory 222 M active memory 2561 M inactive memory 4963 M free memory 87 M buffer memory 483 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 234G 26G 196G 12% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 21% /boot tmpfs tmpfs 790M 20K 790M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 12 17:11:33 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:DB:22:B8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=eac8eb14-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Oct 12 17:11:34 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Thu Oct 12 17:11:34 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu Oct 12 17:11:38 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.2G /var/ 4.2G /var/log 3.4G /var/log/journal/5a78654a3c664c9492f4a0b21e52c254 3.4G /var/log/journal 623M /var/lib Archived and active journals take up 3.3G in the file system. /opt/iobroker/backups: 2.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 6.5G /opt/iobroker/iobroker-data/ 5.6G /opt/iobroker/iobroker-data/history 574M /opt/iobroker/iobroker-data/files 134M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 45M /opt/iobroker/iobroker-data/objects.jsonl 31M /opt/iobroker/iobroker-data/states.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0023-if00-port0 *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v16.18.1 /usr/bin/npm 8.19.2 /usr/bin/npx 8.19.2 /usr/bin/corepack 0.14.1 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 16.18.1-deb-1nodesource1 Candidate: 16.20.2-deb-1nodesource1 Version table: 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages *** 16.18.1-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: 7.1.4 Adapters from github: 2 Adapter State system.adapter.accuweather.0 : accuweather : iobroker - disabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.daikin.0 : daikin : iobroker - enabled + system.adapter.daikin.1 : daikin : iobroker - enabled + system.adapter.daikin.2 : daikin : iobroker - enabled system.adapter.daswetter.0 : daswetter : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.echarts.0 : echarts : iobroker - enabled system.adapter.flot.0 : flot : iobroker - enabled + system.adapter.geofency.0 : geofency : iobroker - enabled, port: 7999, bind: 0.0.0.0 system.adapter.govee.0 : govee : iobroker - disabled + system.adapter.heizoel.0 : heizoel : iobroker - enabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hue-extended.0 : hue-extended : iobroker - enabled + system.adapter.hue-extended.1 : hue-extended : iobroker - enabled system.adapter.hue.0 : hue : iobroker - disabled, port: 80 system.adapter.hue.1 : hue : iobroker - disabled, port: 80 system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : iobroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-material-svg.0 : icons-material-svg : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker - enabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.info.0 : info : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.meater.0 : meater : iobroker - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.net-tools.0 : net-tools : iobroker - enabled system.adapter.oilfox.0 : oilfox : iobroker - enabled system.adapter.parser.0 : parser : iobroker - disabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.pushover.1 : pushover : iobroker - enabled + system.adapter.rest-api.0 : rest-api : iobroker - enabled, port: 8093, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : iobroker - disabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker - enabled + system.adapter.smartmeter.0 : smartmeter : iobroker - enabled + system.adapter.sonos.0 : sonos : iobroker - enabled + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : iobroker - disabled + system.adapter.tr-064.0 : tr-064 : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker - enabled system.adapter.vis-history.0 : vis-history : iobroker - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-lcars.0 : vis-lcars : iobroker - enabled system.adapter.vis-map.0 : vis-map : iobroker - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - enabled system.adapter.vis-metro.0 : vis-metro : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis-weather.0 : vis-weather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.geofency.0 : geofency : iobroker - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : iobroker - enabled, port: 54321 + system.adapter.rest-api.0 : rest-api : iobroker - enabled, port: 8093, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.3.1 , installed 1.3.1 Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "daikin" : 1.4.2 , installed 1.4.2 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "heizoel" : 1.0.3 , installed 1.0.3 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hue" : 3.10.0 , installed 3.10.0 Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "logparser" : 2.2.0 , installed 2.2.0 Adapter "meater" : 1.0.2 , installed 1.0.2 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "moma" : 1.2.9 , installed 1.2.9 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "oilfox" : 4.2.0 , installed 4.2.0 Adapter "parser" : 1.3.2 , installed 1.3.2 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "pvforecast" : 2.8.1 , installed 2.8.1 Adapter "rest-api" : 1.1.0 , installed 1.1.0 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "systeminfo" : 1.1.0 , installed 1.1.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.5.5 , installed 2.5.5 Objects and States Please stand by - This may take a while Objects: 46154 States: 34976 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Get:2 https://repos.influxdata.com/debian bullseye InRelease [7040 B] Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:4 https://deb.nodesource.com/node_16.x bullseye InRelease Err:2 https://repos.influxdata.com/debian bullseye InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Fetched 7040 B in 1s (5888 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 300 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 12076 583/vncserver-x11-c tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 14746 988/iobroker.js-con tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 14739 988/iobroker.js-con tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 14115 460/influxd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 20082 1469/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14082 585/sshd: /usr/sbin tcp 0 0 10.0.3.10:2001 0.0.0.0:* LISTEN 1001 19059 1264/io.hm-rpc.0 tcp 0 0 10.0.3.10:2010 0.0.0.0:* LISTEN 1001 18289 1332/io.hm-rpc.1 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 13123 562/cupsd tcp6 0 0 :::4369 :::* LISTEN 0 10046 1/init tcp6 0 0 :::5900 :::* LISTEN 0 12075 583/vncserver-x11-c tcp6 0 0 :::7999 :::* LISTEN 1001 20659 1343/io.geofency.0 tcp6 0 0 :::8093 :::* LISTEN 1001 22072 1561/io.rest-api.0 tcp6 0 0 :::8082 :::* LISTEN 1001 20162 1550/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17490 1156/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 14302 460/influxd tcp6 0 0 ::1:631 :::* LISTEN 0 13122 562/cupsd tcp6 0 0 :::3500 :::* LISTEN 1001 19114 1289/io.sonos.0 tcp6 0 0 :::22 :::* LISTEN 0 14084 585/sshd: /usr/sbin udp 0 0 0.0.0.0:50005 0.0.0.0:* 1001 22180 988/iobroker.js-con udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13200 501/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 14106 591/cups-browsed udp 0 0 0.0.0.0:41634 0.0.0.0:* 108 13067 403/avahi-daemon: r udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 20593 1281/io.mihome-vacu udp 0 0 0.0.0.0:53422 0.0.0.0:* 1001 19222 1447/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13065 403/avahi-daemon: r udp6 0 0 :::546 :::* 0 13227 501/dhcpcd udp6 0 0 :::59023 :::* 108 13068 403/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13066 403/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-12 17:27:07.210 - info: hue-extended.1 (1750) State value to set for "hue-extended.1.schedules.5f974b42-548e-40a2-bff9-39d_g2_2-18.status" has to be type "boolean" but received type "string" 2023-10-12 17:27:07.211 - info: hue-extended.1 (1750) State value to set for "hue-extended.1.schedules.1a39f1e6-0aeb-4e09-8f48-cbd_g2_2-19.status" has to be type "boolean" but received type "string" 2023-10-12 17:27:07.289 - info: hue-extended.1 (1750) State value to set for "hue-extended.1.rules.xfdani_2__2_5f974b42-548e-40a2-b-19.timestriggered" has to be type "string" but received type "number" 2023-10-12 17:27:07.332 - info: hue-extended.0 (1591) State value to set for "hue-extended.0.sensors.motion_sensor_küche_light-44.state.lightlevel" has to be type "string" but received type "number" 2023-10-12 17:27:10.003 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:13.616 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:13.721 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:13.727 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:15.002 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:17.113 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:20.006 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:20.302 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:21.469 - info: shelly.0 (1469) [MQTT] Device with client id "shellyplusplugs-80646fcfb4b4" connected! 2023-10-12 17:27:25.012 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:25.183 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:27.679 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:30.003 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:31.548 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:35.001 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:35.176 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:38.699 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:40.001 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:42.388 - info: smartmeter.0 (1354) Received 5 values, 3 updated 2023-10-12 17:27:45.002 - info: javascript.0 (1192) script.js.CCU_Sync.State_Sync: Syncing 5sec. CCU Variables 2023-10-12 17:27:46.085 - info: smartmeter.0 (1354) Received 5 values, 3 updatedHier der Slave
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker-slave Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 17:28:05 up 28 min, 3 users, load average: 0.03, 0.04, 0.07 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-10-12 17:28:05 CEST Universal time: Thu 2023-10-12 15:28:05 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** alex /home/alex alex adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 192M 6.9G 35M 682M 7.5G Swap: 99M 0B 99M Total: 7.9G 192M 7.0G 7812 M total memory 192 M used memory 364 M active memory 345 M inactive memory 6937 M free memory 45 M buffer memory 636 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 235G 4.3G 221G 2% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 12 16:59:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:0A:F9:25 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=7e26ae88-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Oct 12 16:59:53 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Thu Oct 12 16:59:53 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu Oct 12 16:59:56 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 557M /var/ 205M /var/log 201M /var/log/journal/c4ab7a6b431b42cb9ff9d507a658a12d 201M /var/log/journal 129M /var/cache Archived and active journals take up 200.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 19M /opt/iobroker/iobroker-data/ 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.8M /opt/iobroker/iobroker-data/objects.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.1 /usr/bin/node v18.18.1 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.1-1nodesource1 Candidate: 18.18.1-1nodesource1 Version table: *** 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is not running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State system.adapter.admin.0 : admin : iobroker-slave - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : iobroker-slave - enabled system.adapter.discovery.0 : discovery : iobroker-slave - enabled + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : iobroker-slave - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Controller "js-controller": 5.0.12 , installed 5.0.12 Objects and States Please stand by - This may take a while Objects: 143 States: 105 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12993 577/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14179 546/cupsd tcp6 0 0 ::1:631 :::* LISTEN 0 14178 546/cupsd tcp6 0 0 :::22 :::* LISTEN 0 12995 577/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15541 470/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15378 595/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1792 397/avahi-daemon: r udp 0 0 0.0.0.0:46787 0.0.0.0:* 108 1794 397/avahi-daemon: r udp6 0 0 :::546 :::* 0 16727 470/dhcpcd udp6 0 0 :::5353 :::* 108 1793 397/avahi-daemon: r udp6 0 0 :::52918 :::* 108 1795 397/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-12 17:08:11.696 - info: admin.0 (961) terminating http server on port 8081 2023-10-12 17:08:11.698 - info: backitup.0 (1252) cleaned everything up... 2023-10-12 17:08:11.695 - info: host.iobroker-slave stopInstance system.adapter.admin.0 (force=false, process=true) 2023-10-12 17:08:11.696 - info: host.iobroker-slave stopInstance system.adapter.discovery.0 (force=false, process=true) 2023-10-12 17:08:11.697 - info: host.iobroker-slave stopInstance system.adapter.backitup.0 (force=false, process=true) 2023-10-12 17:08:11.719 - info: discovery.0 (1218) Got terminate signal TERMINATE_YOURSELF 2023-10-12 17:08:11.723 - info: backitup.0 (1252) Got terminate signal TERMINATE_YOURSELF 2023-10-12 17:08:11.723 - info: admin.0 (961) Got terminate signal TERMINATE_YOURSELF 2023-10-12 17:08:11.727 - info: host.iobroker-slave stopInstance system.adapter.admin.0 send kill signal 2023-10-12 17:08:11.730 - info: host.iobroker-slave stopInstance system.adapter.discovery.0 send kill signal 2023-10-12 17:08:11.730 - info: host.iobroker-slave stopInstance system.adapter.backitup.0 send kill signal 2023-10-12 17:08:11.732 - info: backitup.0 (1252) terminating 2023-10-12 17:08:11.732 - info: admin.0 (961) terminating 2023-10-12 17:08:11.735 - info: backitup.0 (1252) Terminated (NO_ERROR): Without reason 2023-10-12 17:08:11.734 - info: admin.0 (961) Terminated (NO_ERROR): Without reason 2023-10-12 17:08:11.770 - info: discovery.0 (1218) terminating 2023-10-12 17:08:11.772 - info: discovery.0 (1218) Terminated (NO_ERROR): Without reason 2023-10-12 17:08:12.200 - info: discovery.0 (1218) terminating 2023-10-12 17:08:12.208 - info: backitup.0 (1252) terminating 2023-10-12 17:08:12.209 - info: admin.0 (961) terminating 2023-10-12 17:08:12.308 - info: host.iobroker-slave instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) 2023-10-12 17:08:12.343 - info: host.iobroker-slave instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR) 2023-10-12 17:08:12.387 - info: host.iobroker-slave instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2023-10-12 17:08:12.388 - info: host.iobroker-slave All instances are stopped. 2023-10-12 17:08:12.522 - info: host.iobroker-slave terminated -
@lxffm sagte in [gelöst] Hilfe bei Multihost:
/usr/bin/nodejs v18.18.1
mit der Version sollte es gefixt sein.
Allerdings hat dein Master noch eine alte Node Version -
-
@lxffm sagte in [gelöst] Hilfe bei Multihost:
Also sollte ich wohl das Update gemäß der Anleitung auf dem Master machen?
weil das ja vieeel zu kompliziert ist, hat @Thomas-Braun das jetzt in ein fertiges node-fixer skript gegossen
-
Der Master hat auch ein Thema bei der Spannungsversorgung:
Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurredsowie beim influxdb-Repo:
W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07Esowie bei den Updates:
Pending Updates: 300Der Slave hat ein Thema mit der graphischen Oberfläche:
*** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.targetund mit failed services:
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server -
Ich vermute mal die Updates kann ich mit
apt-get update und upgrade beheben korrekt?Ich weiß allerdings nicht wie ich diesen influxDB-Repo Fehler und die Graphische Obeflächen Fehler beheben soll?
Die Spannungsversorgung kann ich mir mal anschauen aber der hängt an einer Power Supply die ich mit dem Raspi beim Raspishop als Set gekauft habe sollte also gut passend dimensioniert sein und hängt sogar an einer USV.
Aber mal eine dumme Frage zum Slave. Ich habe auf dem Slave nur ioBroker installiert, aber nicht eingerichtet. Muss ich den vorher einrichten? Ich dachte als Slave bekommt er ohnehin alle Daten vom Master? das würde vermtl die Failed Services erklären oder?
Ich habe NodeJS zwischenzeitlich gemäß Anleitung geupdated auf dem Master, beide sind jetzt auf v18.18.1
LG
Alex -
@lxffm sagte in [gelöst] Hilfe bei Multihost:
aber nicht eingerichtet.
alles richtig gemacht. du hättest sogar alle Adapter löschen können.
der controller läuft aber
EDIT:
heissen beide Hostsiobroker? -
@homoran nein ich hatte den slave bei der RasPi Installation iobroker-slave genannt.
Aber auch nach dem NodeJS Update durfte ich nochmal die "Secret Passphrase anlegen" und danach hat er sich wieder tot geblinkt
alex@iobroker:~ $ iobroker multihost enable Multihost discovery server activated on this host. If iobroker is currently not running please start befeore trying to discover this host. Important: Multihost discovery works with UDP packets. Make sure they are routed correctly in your network. If you use Docker you also need to configure this correctly. Multihost discovery will be automatically deactivated after 15 minutes. If you want to activate it permanently use the --persist flag Discovery authentication activated. Enter secret phrase for connection: Repeat secret phrase for connection: Please check the binding of the configured jsonl server to allow remote connections. Please restart ioBroker for the changes to take effect: "iobroker restart" Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 -
@lxffm Hast du denn das Downgrade vom js-controller auf 5.0.11 gemacht?
Und beim Slave musste ich auf 4.0.24 gehen. -
Nein ich bekomme das nicht hin
Ich bin nicht so der Linux crack und weiß nicht was mir das sagen soll.
alex@iobroker-slave:~ $ npm install iobroker.js-controller@5.0.11 --production npm WARN config production Use `--omit=dev` instead. added 3 packages, removed 4 packages, changed 19 packages, and audited 306 packages in 39s 13 packages are looking for funding run `npm fund` for details 6 vulnerabilities (1 low, 4 moderate, 1 high) To address issues that do not require attention, run: npm audit fix To address all issues (including breaking changes), run: npm audit fix --force Run `npm audit` for details. alex@iobroker-slave:~ $ iobroker version 5.0.12 -
@lxffm du musst zuerst in das Verzeichnis dem Befehl:
cd /opt/iobrokerwechseln. Und danach mit npm die ältere Version installieren.
-
Du stehst im falschen Verzeichnis. Du hast das jetzt um Home von alex installiert.
Mit
cd /opt/iobroker npm install iobroker.js-controller@5.0.11 --omit=devginge es.
-
@thomas-braun said in [gelöst] Hilfe bei Multihost:
cd /opt/iobroker
Danke euch das war der Fehler für das Downgrade.
Jetzt habe ich die Versionen entsprechend gedowngraded.
Jetzt funktionieren auch beide Befehle, wir nähern uns der Lösung.Jetzt allerdings ein weiteres Problem.
Auf meinem Master sind zwei Netzwerkinterfaces am laufen. Das WIFI mit DHCP IP (10.0.1.250 aktuell) und der ETH Adapter mit fester IP (10.0.3.10). Der Browse Befehl am Slave findet jetzt nur die DHCP IP. Ich vermute das ist nicht so clever ihn darüber zu verbinden.alex@iobroker-slave:/opt/iobroker $ iobroker multihost browse 1 | 10.0.1.250 | host | 10.0.1.250 | "authentication required" alex@iobroker-slave:/opt/iobroker $ iobroker multihost connect 1 | 10.0.1.250 | host | 10.0.1.250 | "authentication required" -
OK das habe ich selbst gelöst bekommen. Habe das WIFI Interface down genommen und dann hat er den Master auf dem anderen Interface gefunden.
Zusammengefasst also folgende Fehler vorhanden:
- Master ist auf 5.0.12 bugged
- Slave ist auf allem über 4.0.24 bugged
- Die browse Routine bricht beim ersten Interface ab und findet nicht das zweite Interface
-
Ich habe gestern auch versucht einen Slave aufzusetzen und zu koppeln. Nur Dank der Beiträge hier hat es geklappt.
- Master läuft mit: 5.0.16
- Slave lief nur mit 4.0.24 (wie @LxFFM geschrieben hat) sonst wird kein Master gefunden!
Bisher habe ich noch keine Adapter auf dem Slave. War erstmal froh, dass es läuft
