Performance Probleme durch Shelly Adapter?
-
@frederik-buss
@homoran said in Performance Probleme durch Shelly Adapter?:@frederik-buss ich gehe davon aus, dass bei @Schtallone noch das Original läuft und er die beiden links nur herausgesucht hat um zu wissen was hal ist
Guten morgen,genau so sieht es aus, ich habe nur recherciert zum dem HAL Deamon und nichts an meinem System verändert.
-
top - 07:26:41 up 1 day, 18:17, 0 users, load average: 1,84, 1,77, 1,78 Tasks: 14 total, 1 running, 13 sleeping, 0 stopped, 0 zombie %Cpu(s): 16,9 us, 5,7 sy, 0,0 ni, 73,2 id, 3,9 wa, 0,0 hi, 0,3 si, 0,0 st MiB Mem : 7792,2 total, 1364,3 free, 3246,5 used, 3181,3 buff/cache MiB Swap: 23447,2 total, 23379,7 free, 67,5 used. 3621,2 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 317 iobroker 20 0 724076 106928 20492 S 3,3 1,3 14:36.83 io.shelly.0 213 iobroker 20 0 11,1g 278124 21244 S 3,0 3,5 26:03.69 iobroker.js-con 31027 iobroker 20 0 21,0g 178900 49192 S 2,0 2,2 1:02.84 node-red 347 iobroker 20 0 715884 92196 20424 S 1,0 1,2 3:04.56 io.mqtt.0 261 iobroker 20 0 820708 69204 20628 S 0,3 0,9 0:17.12 io.node-red.0 381 iobroker 20 0 771220 90100 20424 S 0,3 1,1 2:48.92 io.sourceanalyt 1 root 20 0 7372 3604 3272 S 0,0 0,0 0:00.07 bash 246 iobroker 20 0 1033820 156276 21988 S 0,0 2,0 0:40.63 io.admin.0 343 root 20 0 7504 3752 3312 S 0,0 0,0 0:00.03 bash 370 iobroker 20 0 10,9g 84224 21232 S 0,0 1,1 0:18.38 io.backitup.0 398 root 20 0 10308 3696 3220 R 0,0 0,0 0:00.00 top 472 iobroker 20 0 693820 66724 20360 S 0,0 0,8 0:19.73 io.shuttercontr 1212 iobroker 20 0 695460 66964 20436 S 0,0 0,8 0:53.98 io.modbus.0 3525 iobroker 20 0 960232 71468 22448 S 0,0 0,9 0:22.99 io.netatmo.0heute morgen mit doch schon einigen Adaptern wieder am start.
Gruß Euch.
-
@frederik-buss said in Performance Probleme durch Shelly Adapter?:
Unabhängig wie das mit der neuen Platte ausgeht, würde ich wirklich drüber nachdenken, das Produktivsystem grundsätzlich anders aufzusetzen, sprich separate Hardware (Ich glaube das wurde auch schon einige Male hier angemerkt...?). Dann würden auch die "komischen" Prozesse wie der JDownloader (Gibts den wirklich noch? Wofür nutzt mal den heutzutage?) keinen Schaden mehr anrichten.
Ja da läuft es gedanklich bei mir drauf hinaus, dass ich mir einen separaten PI (Gen4 mit 8gb) für den iob und ggf. noch Nodered anschaffe. Hier würde ich aber auch auf DOCKER gehen wollen, denn so (dachte ich) kann ich die Container auf im Falle eines Ausfalls als Ersatz auf dem NAS (vorübergehend) betreiben.
Gruß
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung.
Moin,
das sind, glaube ich, zwei unterschiedliche Dinge, habe aber heute Morgen keine Zeit, muss Frauchen bespaßen, und im Bad einiges renovieren.
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.
Nein, die laufen schon, normalerweise, findet man die Log Files unter
/var/log/syslogoder die QNAP hat eine APP um Log auf der WEB GUI anzuzeigen.VG
Bernd -
@dp20eic said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung.
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.
Nein, die laufen schon, normalerweise, findet man die Log Files unter
/var/log/syslogoder die QNAP hat eine APP um Log auf der WEB GUI anzuzeigen.VG
BerndIch bin per WINSCP mal auf die Suchge nach dem syslog gegangen und nicht fündig geworden. Es gibt aber ein QNAP-log:
2023-09-16 13:12:18,851 [Information] [Database] initialize 2023-09-16 13:12:19,116 [Information] [Database] initialize database 2023-09-16 13:12:19,120 [Information] [Database] initialize function 2023-09-16 13:12:19,122 [Information] [Database] initialize procedure 2023-09-16 13:12:19,181 [Information] [Database] initialize device table 2023-09-16 13:12:19,266 [Information] [Database] initialize filter tables 2023-09-16 13:12:19,285 [Information] [Database] initialize highlight tables 2023-09-16 13:12:19,285 [Information] [Database] initialize receiver table 2023-09-16 13:12:19,413 [Information] [Database] initialize local_event log table 2023-09-16 13:12:19,446 [Information] [Database] initialize remote_event log table 2023-09-16 13:12:19,448 [Information] [Database] initialize local_access access table 2023-09-16 13:12:19,449 [Information] [Database] initialize remote_access access table 2023-09-16 13:12:19,504 [Information] [Compatible] notify_send = 0x7f5bc925eff0 2023-09-16 13:12:19,504 [Information] [Compatible] naslog_notice_send = 0x7f5bc925ea20 2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user = 0x7f5bc8ff9f00 2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user_v1 = 0x7f5bc8ff9fc0 2023-09-16 13:12:19,504 [Information] [qulog] service pid(13801) start. 2023-09-16 13:12:19,507 [Information] [SyslogClientManager] load system default adapter mac address [24:5e:be:3b:f1:9f] 2023-09-16 13:12:19,508 [Information] [SyslogClientManager] start threading 2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 .. 2023-09-16 13:12:38,660 [Warning] [A049, C009, 39] [Hardware Status] "Host: 3.5" SATA HDD 1": Medium error. Run a bad block scan on the drive. Replace the drive if the error persists. 2023-09-16 13:12:39,840 [Information] [A007, C001, 18] [Power] The system has started. 2023-09-16 13:12:39,864 [Information] [A201, reserved, 0153] [Network & Virtual Switch] Initialized Network & Virtual Switch. 2023-09-16 13:12:39,868 [Information] [A201, C012, 0115] [Network & Virtual Switch] Set "Virtual Switch 4" as the system default gateway. 2023-09-16 13:12:39,871 [Information] [A201, C012, 0185] [Network & Virtual Switch] Configured "Virtual Switch 4" as system default gateway. 2023-09-16 13:13:14,994 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.86.155". 2023-09-16 13:13:20,626 [Information] [A051, C001, 4] [Multimedia Console] Started Multimedia Services. 2023-09-16 13:13:48,885 [Information] [A039, C002, 22] [App Center] Started Media Streaming Add-on. 2023-09-16 13:14:49,547 [Information] [, , ] Starting Plex Media Server... 2023-09-16 13:17:11,154 [Information] [A041, C003, 31] [myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready. 2023-09-16 13:17:12,959 [Information] [A041, C003, 28] [myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready. 2023-09-16 13:29:52,626 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically". 2023-09-16 13:29:58,322 [Information] [A039, C005, 99] [App Center] Finished app update check. 2023-09-16 14:04:51,180 [Information] [A214, C005, 5003] [Container Station] Removing volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f". 2023-09-16 14:04:55,026 [Information] [A214, C005, 5004] [Container Station] Removed volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f". 2023-09-16 14:04:56,515 [Information] [A214, C005, 5003] [Container Station] Removing volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098". 2023-09-16 14:04:57,653 [Information] [A214, C005, 5004] [Container Station] Removed volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098". 2023-09-16 14:04:59,037 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-ini". 2023-09-16 14:05:01,222 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-ini". 2023-09-16 14:05:03,183 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-storage". 2023-09-16 14:05:05,544 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-storage". 2023-09-16 14:05:07,878 [Information] [A214, C005, 5003] [Container Station] Removing volume "iobroker_data". 2023-09-16 14:05:10,541 [Information] [A214, C005, 5004] [Container Station] Removed volume "iobroker_data". 2023-09-16 14:05:43,050 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08". 2023-09-16 14:06:12,825 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08". 2023-09-16 14:06:13,782 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45". 2023-09-16 14:06:20,015 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45". 2023-09-16 14:09:05,577 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 13:46:01 ~ 2023-09-16 14:09:03. 2023-09-16 14:53:15,534 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.81.138". 2023-09-16 15:06:04,155 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 14:46:01 ~ 2023-09-16 15:06:03. 2023-09-16 16:12:04,036 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 15:46:02 ~ 2023-09-16 16:12:02. 2023-09-16 17:06:02,642 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 16:46:01 ~ 2023-09-16 17:06:01. 2023-09-16 18:10:04,809 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 17:46:01 ~ 2023-09-16 18:10:02. 2023-09-16 19:07:03,187 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 18:46:01 ~ 2023-09-16 19:07:02. 2023-09-16 20:12:02,938 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 19:46:02 ~ 2023-09-16 20:12:01. 2023-09-16 20:59:45,699 [Information] [A039, C002, 23] [App Center] Stopped Video Station. 2023-09-16 21:00:10,610 [Information] [A039, C002, 23] [App Center] Stopped SSD Profiling Tool. 2023-09-16 21:04:02,685 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 20:46:03 ~ 2023-09-16 21:04:01. 2023-09-16 22:12:03,189 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 21:46:01 ~ 2023-09-16 22:12:02. 2023-09-16 23:08:02,900 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically". 2023-09-16 23:08:05,655 [Information] [A039, C005, 99] [App Center] Finished app update check. 2023-09-16 23:09:02,852 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 22:46:02 ~ 2023-09-16 23:09:01. 2023-09-17 00:00:26,326 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D". 2023-09-17 00:01:04,831 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic. 2023-09-17 00:12:02,330 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 23:46:01 ~ 2023-09-17 00:12:01. 2023-09-17 00:56:17,218 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1. 2023-09-17 01:00:11,609 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1. 2023-09-17 01:00:34,538 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1. 2023-09-17 01:00:35,236 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0. 2023-09-17 01:00:38,894 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-12_0101". LUN: iSCSI_0. 2023-09-17 01:00:39,550 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created. 2023-09-17 01:00:45,080 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0. 2023-09-17 01:12:05,441 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 00:46:01 ~ 2023-09-17 01:12:01. 2023-09-17 01:15:24,896 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D". 2023-09-17 02:12:02,485 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 01:46:01 ~ 2023-09-17 02:12:01. 2023-09-17 03:00:07,075 [Information] [A227, C001, 1] [Malware Remover] Started scanning. 2023-09-17 03:02:30,834 [Information] [A227, C001, 19] [Malware Remover] Scan completed. 2023-09-17 03:11:10,538 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 02:46:00 ~ 2023-09-17 03:11:08. 2023-09-17 04:12:02,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 03:46:01 ~ 2023-09-17 04:12:01. 2023-09-17 05:01:59,297 [Information] [A293, C004, 28] [QuFirewall] Updated the PSIRT tor deny list from version 20230914 to version 20230916. 2023-09-17 05:01:59,370 [Information] [A293, C004, 27] [QuFirewall] Updated the PSIRT database from version 20230914 to version 20230916. 2023-09-17 05:27:02,551 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 04:46:01 ~ 2023-09-17 05:27:02. 2023-09-17 06:12:01,451 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 05:46:01 ~ 2023-09-17 06:12:01. 2023-09-17 07:11:01,729 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 06:46:01 ~ 2023-09-17 07:11:01. 2023-09-17 08:00:03,171 [Information] [A227, C001, 43] [Malware Remover] Started automatically updating the application. 2023-09-17 08:00:04,873 [Information] [A227, C001, 44] [Malware Remover] Finished automatic update check. No new software version found. 2023-09-17 08:12:02,380 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 07:46:01 ~ 2023-09-17 08:12:01. 2023-09-17 09:11:05,122 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 08:46:01 ~ 2023-09-17 09:11:02. 2023-09-17 10:07:02,458 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 09:46:01 ~ 2023-09-17 10:07:01. 2023-09-17 11:04:01,952 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 10:46:02 ~ 2023-09-17 11:04:01. 2023-09-17 11:04:34,180 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache. 2023-09-17 11:04:58,446 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk. 2023-09-17 11:08:26,477 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache. 2023-09-17 11:09:27,611 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin. 2023-09-17 11:48:36,743 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache. 2023-09-17 11:57:19,373 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core. 2023-09-17 11:57:44,188 [Information] [A039, C002, 23] [App Center] Stopped Container Station. 2023-09-17 12:09:02,617 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 11:46:01 ~ 2023-09-17 12:09:01. 2023-09-17 12:12:06,683 [Information] [A039, C002, 22] [App Center] Started Container Station. 2023-09-17 12:13:00,068 [Information] [A039, C002, 22] [App Center] Started QNAP AI Core. 2023-09-17 12:57:04,373 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 12:46:01 ~ 2023-09-17 12:57:02. 2023-09-17 13:53:08,885 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop". 2023-09-17 13:53:15,958 [Information] [A039, C001, 47] [App Center] IOtop enabled. 2023-09-17 13:55:17,880 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop". 2023-09-17 13:55:24,806 [Information] [A039, C001, 47] [App Center] IOtop enabled. 2023-09-17 13:55:27,913 [Information] [A039, C001, 88] [App Center] Updated IOtop from 0.1.1.1 to 0.1.1.1 . 2023-09-17 13:59:02,896 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 13:46:01 ~ 2023-09-17 13:59:01. 2023-09-17 14:49:02,240 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 14:46:02 ~ 2023-09-17 14:49:01. 2023-09-17 14:53:19,104 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.90.229". 2023-09-17 16:00:02,195 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 15:46:01 ~ 2023-09-17 16:00:01. 2023-09-17 16:59:01,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 16:46:01 ~ 2023-09-17 16:59:01. 2023-09-17 17:36:59,061 [Information] [A039, C002, 23] [App Center] Stopped License Center. 2023-09-17 17:37:05,815 [Information] [A039, C002, 23] [App Center] Stopped Malware Remover. 2023-09-17 17:37:06,716 [Information] [A039, C002, 23] [App Center] Stopped Media Streaming Add-on. 2023-09-17 17:37:12,474 [Information] [A039, C002, 23] [App Center] Stopped Qboost. 2023-09-17 17:37:13,326 [Information] [, , ] Stopping Plex Media Server... 2023-09-17 17:37:21,092 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core. 2023-09-17 17:37:22,802 [Information] [A039, C002, 23] [App Center] Stopped Plex Media Server. 2023-09-17 17:37:44,476 [Information] [A039, C002, 23] [App Center] Stopped Qsync Central. 2023-09-17 17:37:50,078 [Information] [A039, C002, 23] [App Center] Stopped myQNAPcloud Link. 2023-09-17 17:38:02,055 [Information] [A039, C002, 23] [App Center] Stopped QuMagie. 2023-09-17 17:38:15,968 [Information] [A039, C002, 23] [App Center] Stopped QuFirewall. 2023-09-17 17:38:18,494 [Information] [A039, C002, 23] [App Center] Stopped Container Station. 2023-09-17 17:38:30,707 [Information] [A039, C002, 23] [App Center] Stopped Security Center. 2023-09-17 17:38:41,127 [Information] [A039, C002, 23] [App Center] Stopped Hybrid Backup Sync. 2023-09-17 17:38:58,104 [Information] [A039, C002, 23] [App Center] Stopped Multimedia Console. 2023-09-17 17:40:14,480 [Information] [A039, C002, 22] [App Center] Started Qboost. 2023-09-17 17:41:51,978 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin. 2023-09-17 17:41:52,169 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk. 2023-09-17 17:41:57,535 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache. 2023-09-17 17:42:29,297 [Information] [A039, C002, 23] [App Center] Stopped Qboost. 2023-09-17 19:03:38,657 [Information] [A039, C002, 22] [App Center] Started Container Station. 2023-09-17 19:16:25,066 [Information] [A039, C002, 23] [App Center] Stopped Container Station. 2023-09-17 19:40:16,050 [Information] [A039, C005, 89] [App Center] Enabled "Allow installation of applications without a valid digital signature". 2023-09-17 19:46:07,160 [Information] [A039, C005, 91] [App Center] Added an app repository. 2023-09-17 19:46:54,798 [Information] [A039, C005, 93] [App Center] Deleted an app repository. 2023-09-17 19:47:23,352 [Information] [A039, C005, 95] [App Center] Disabled app update checks. 2023-09-17 19:50:16,494 [Information] [A039, C001, 46] [App Center] Installed htop (CLI) 3.0.0.1 in "/share/CACHEDEV1_DATA/.qpkg/HTOP". 2023-09-17 19:50:22,390 [Information] [A039, C001, 47] [App Center] htop (CLI) enabled. 2023-09-17 19:50:47,113 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version. 2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version. 2023-09-17 20:00:38,255 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version. 2023-09-17 20:01:30,018 [Information] [A039, C002, 22] [App Center] Started Qboost. 2023-09-17 20:01:51,227 [Information] [A039, C002, 22] [App Center] Started Container Station. 2023-09-17 20:02:07,553 [Information] [A039, C002, 22] [App Center] Started Hybrid Backup Sync. 2023-09-17 20:58:33,452 [Information] [A039, C002, 23] [App Center] Stopped htop (CLI). 2023-09-17 20:58:39,400 [Information] [A039, C002, 23] [App Center] Stopped IOtop. 2023-09-17 21:00:21,936 [Information] [A041, C003, 14] [myQNAPcloud] Disabled myQNAPcloud Link. 2023-09-17 21:00:29,324 [Information] [A041, C002, 12] [myQNAPcloud] Disabled DDNS. 2023-09-18 00:00:16,206 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D". 2023-09-18 00:00:57,650 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic. 2023-09-18 01:00:08,447 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1. 2023-09-18 01:00:30,336 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1. 2023-09-18 01:00:30,953 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0. 2023-09-18 01:00:33,643 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-13_0100". LUN: iSCSI_0. 2023-09-18 01:00:34,527 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created. 2023-09-18 01:00:38,254 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0. 2023-09-18 01:13:49,899 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1. 2023-09-18 01:24:45,585 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D". 2023-09-18 07:43:31,262 [Information] [A039, C002, 22] [App Center] Started htop (CLI). -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 ..Da ist das Problem mit den I/O, was sehr wahrscheinlich die Ursache für die hohe Load ist.
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.
-
@homoran said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.
Ja, ich war gestern auf der Suche nach einer möglichkeit, TOP auf dem NAS laufen zu lassen. Dabei gab es ein paar Versionen zu Auswahl, ohne das da eine Kompatiblität stand. Ich habe das richtige aber gefunden.
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
TOP auf dem NAS laufen zu lassen.
und dafür braucht es eine APP???
man tippt einfach
topin der Konsole ein. -
@homoran
nicht auf einem NAS, wie ich es habe. Das ist dann jetzt auch keine APP in dem Sinne, sondern ein Befehl über die Konsole -
@schtallone Und den Befehl bringt eigentlich jedes Linux, und sei es noch so abgespeckt, gleich mit. Einzig htop muss man meist separat installieren, aber top sollte Dein QNAP auch gekannt haben.
Gruss, Jürgen
-
Nabend zusammen,
die neue Festplatte ist nun seit ca. 48h verbaut und der RAID-Sync ist seit ca. 20h beendet.
Dieses Bild zeigt sich nun, wohlgemerkt mit Docker Containern am laufen...
[~] # htop 1 [##########################**************** 86.3%] Tasks: 189, 943 thr; 2 running 2 [################################***********97.0%] Load average: 1.19 1.03 1.01 Mem[||||||||||||||||||||||||||#########**4.04G/7.61G] Uptime: 5 days, 04:08:18 Swp[||| 1.07G/22.9G] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 32245 1883 20 0 4160 1668 872 S 0.0 0.0 5:08.57 /usr/sbin/mosquitto -c /mosquitto/config/mosquitto.co 32121 472 20 0 860M 70084 27064 S 0.0 0.9 5:15.08 grafana server --homepath=/usr/share/grafana --config 6144 472 20 0 860M 70084 27064 S 0.0 0.9 0:44.77 grafana server --homepath=/usr/share/grafana --config 32454 472 20 0 860M 70084 27064 S 0.0 0.9 0:23.07 grafana server --homepath=/usr/share/grafana --config 32458 472 20 0 860M 70084 27064 S 0.0 0.9 0:00.41 grafana server --homepath=/usr/share/grafana --config 32459 472 20 0 860M 70084 27064 S 0.0 0.9 0:01.79 grafana server --homepath=/usr/share/grafana --config 32460 472 20 0 860M 70084 27064 S 0.0 0.9 0:21.44 grafana server --homepath=/usr/share/grafana --config 32461 472 20 0 860M 70084 27064 S 0.0 0.9 0:00.00 grafana server --homepath=/usr/share/grafana --config 6166 472 20 0 860M 70084 27064 S 0.0 0.9 0:00.00 grafana server --homepath=/usr/share/grafana --config 6167 472 20 0 860M 70084 27064 S 0.0 0.9 0:25.08 grafana server --homepath=/usr/share/grafana --config 6168 472 20 0 860M 70084 27064 S 0.0 0.9 0:33.86 grafana server --homepath=/usr/share/grafana --config 6170 472 20 0 860M 70084 27064 S 0.0 0.9 0:33.05 grafana server --homepath=/usr/share/grafana --config 6172 472 20 0 860M 70084 27064 S 0.0 0.9 0:43.92 grafana server --homepath=/usr/share/grafana --config 6173 472 20 0 860M 70084 27064 S 0.0 0.9 0:39.44 grafana server --homepath=/usr/share/grafana --config 6174 472 20 0 860M 70084 27064 S 0.0 0.9 0:46.78 grafana server --homepath=/usr/share/grafana --config 17640 Peter Pau 20 0 21.0G 189M 49412 S 2.5 2.4 14:19.52 node-red 5948 Peter Pau 20 0 3517M 390M 7540 S 5.6 5.0 1h50:26 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS 930 Peter Pau 20 0 3538M 588M 22120 S 27.2 7.6 5h29:50 influxd 16260 Peter Pau 20 0 11.5G 514M 15964 S 1.9 6.6 3h58:08 iobroker.js-controller 27530 Peter Pau 20 0 906M 109M 13572 S 3.1 1.4 1h41:06 io.shelly.0 17650 Peter Pau 20 0 21.0G 189M 49412 S 0.0 2.4 0:39.55 node-red 6362 Peter Pau 20 0 3538M 588M 22120 S 6.8 7.6 22:12.72 influxd 17652 Peter Pau 20 0 21.0G 189M 49412 S 0.0 2.4 0:38.58 node-red 17651 Peter Pau 20 0 21.0G 189M 49412 S 0.0 2.4 0:38.54 node-red 7166 Peter Pau 20 0 3517M 390M 7540 S 3.1 5.0 51:31.16 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS 17653 Peter Pau 20 0 21.0G 189M 49412 S 0.0 2.4 0:38.68 node-red 6796 Peter Pau 20 0 3538M 588M 22120 S 0.0 7.6 25:54.77 influxd 7605 Peter Pau 20 0 3517M 390M 7540 S 1.9 5.0 30:26.17 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS 18062 Peter Pau 20 0 924M 118M 12944 S 0.0 1.5 25:31.62 io.sourceanalytix.0 17641 Peter Pau 20 0 703M 62988 12868 S 0.0 0.8 24:11.34 io.mqtt.0 5380 Peter Pau 20 0 31148 21796 160 S 0.0 0.3 17:18.06 Xvnc -nolisten tcp -nolisten local -listen unix -geom 6204 Peter Pau 20 0 3538M 588M 22120 S 9.3 7.6 23:05.17 influxd 6148 Peter Pau 20 0 3538M 588M 22120 S 0.6 7.6 28:15.44 influxd 6774 Peter Pau 20 0 3538M 588M 22120 S 0.0 7.6 17:29.21 influxd 27534 Peter Pau 20 0 906M 109M 13572 S 0.0 1.4 2:15.49 io.shelly.0Sieht deutlich besser aus. Hätte nicht gedacht, dass diese SMART MEldung solche Probleme erzeugen kann....
Gruß
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
dass diese SMART MEldung solche Probleme erzeugen kann....
nicht die Meldung
die defekte Platte!
Die I/O Vorgänge dauerten zu lange und führten zu einem Rückstau, was die load average in die höhe trieb, obwohl die CPU Last noch gut aussah.
-
So, und jetzt mache ich mich an die Aufgabe, den Modbus Adapter noch zu pimpen bzw. meine Einstellungen diesbezuglich.
2023-09-21 17:25:11.808 - error: dwd.0 (14345) Empty or invalid JSON: Cannot read JSON file: Error: getaddrinfo EAI_AGAIN www.dwd.de 2023-09-21 17:25:11.811 - info: dwd.0 (14345) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:25:12.337 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:25:33.624 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:26:04.978 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:27:04.979 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:28:08.027 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:29:08.029 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:29:43.478 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:30:00.177 - info: host.iobroker instance system.adapter.dwd.0 started with pid 14605 2023-09-21 17:30:02.111 - info: dwd.0 (14605) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:30:05.211 - info: dwd.0 (14605) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:30:05.758 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:30:43.480 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:30:58.025 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:31:58.026 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:32:54.987 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:33:54.989 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:34:18.026 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:35:00.058 - info: host.iobroker instance system.adapter.dwd.0 started with pid 14859 2023-09-21 17:35:01.465 - info: dwd.0 (14859) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:35:02.343 - info: dwd.0 (14859) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:35:02.869 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:35:18.027 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:35:54.992 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:36:54.994 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:37:14.986 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:38:14.987 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:39:24.494 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:40:00.064 - info: host.iobroker instance system.adapter.dwd.0 started with pid 15116 2023-09-21 17:40:01.988 - info: dwd.0 (15116) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:40:03.781 - info: dwd.0 (15116) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:40:04.306 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:40:24.495 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:40:44.995 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:41:44.996 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:43:24.498 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:44:24.500 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:45:00.065 - info: host.iobroker instance system.adapter.dwd.0 started with pid 15359 2023-09-21 17:45:01.721 - info: dwd.0 (15359) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:45:03.133 - info: dwd.0 (15359) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:45:03.688 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:47:38.049 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:48:38.052 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:48:55.004 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:49:55.007 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:50:00.056 - info: host.iobroker instance system.adapter.dwd.0 started with pid 15615 2023-09-21 17:50:01.905 - info: dwd.0 (15615) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:50:03.570 - info: dwd.0 (15615) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:50:04.112 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:50:13.223 - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds 2023-09-21 17:50:55.007 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:51:55.009 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:52:28.070 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:53:28.072 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:55:00.063 - info: host.iobroker instance system.adapter.dwd.0 started with pid 15872 2023-09-21 17:55:01.546 - info: dwd.0 (15872) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 17:55:02.457 - info: dwd.0 (15872) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 17:55:02.977 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 17:55:18.079 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:56:18.081 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:56:58.083 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:57:58.086 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 17:58:58.084 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 17:59:58.086 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:00:00.058 - info: host.iobroker instance system.adapter.dwd.0 started with pid 16115 2023-09-21 18:00:03.212 - info: dwd.0 (16115) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 18:00:05.863 - info: dwd.0 (16115) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 18:00:06.387 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 18:00:18.082 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:01:18.084 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:02:13.108 - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds 2023-09-21 18:02:35.021 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:02:54.448 - info: shelly.0 (5156) [MQTT] Device with client id "shellyplus1pm-a8032ab96370" connected! 2023-09-21 18:03:35.022 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:03:58.089 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:04:58.091 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:05:00.064 - info: host.iobroker instance system.adapter.dwd.0 started with pid 16372 2023-09-21 18:05:01.542 - info: dwd.0 (16372) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 18:05:02.768 - info: dwd.0 (16372) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 18:05:03.292 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 18:05:33.516 - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds 2023-09-21 18:07:34.528 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:08:34.532 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:09:05.028 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:10:00.059 - info: host.iobroker instance system.adapter.dwd.0 started with pid 16631 2023-09-21 18:10:01.955 - info: dwd.0 (16631) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12 2023-09-21 18:10:03.758 - info: dwd.0 (16631) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-09-21 18:10:04.309 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-21 18:10:05.030 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:10:48.091 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:11:48.093 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:12:05.040 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47 2023-09-21 18:12:23.562 - info: admin.0 (246) ==> Connected system.user.admin from ::ffff:192.168.1.119 2023-09-21 18:13:05.042 - info: modbus.0 (1212) Connected to slave 192.168.1.47 2023-09-21 18:13:38.096 - info: modbus.0 (1212) Disconnected from slave 192.168.1.47DIe Fehler hier stören mich noch, dies werde ich dann aber in diesem Thread weiter machen:
Dann ist dieses Thread wohl jetzt "als gelöst" anzusehen.
Vielen Dank für Eure Unterstützung. Ich habe viel gelernt... DANKE
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Error: getaddrinfo EAI_AGAIN www.dwd.de
DIe Fehler hier stören mich noch,
Es ist nicht nur noch der Modbus , hast du diesen Fehler immer schon gehabt oder ist der aktuell !?
-
@glasfaser
hmm, ist mir so jetzt noch nicht öfter ins auge gefallen. Werde mal diesbezüglich das näher beobachten...
