Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. Performance Probleme durch Shelly Adapter?

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.7k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.2k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    3.1k

Performance Probleme durch Shelly Adapter?

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
256 Beiträge 14 Kommentatoren 49.7k Aufrufe 9 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • S Schtallone

    @dp20eic said in Performance Probleme durch Shelly Adapter?:

    @schtallone sagte in Performance Probleme durch Shelly Adapter?:

    @dp20eic
    

    so ich habe es geschafft, auch den NI Wert anzeigen z

    Moin,

    was ist hal_deamon der nutzt 35 % und läuft x mal, auch manaRequest.cgi verbrät da viel CPU Zeit, das ist aber QNAP spezifisch, das müsste das Health Center, oder wie das bei QNAP heißt sein, für ein Paar bunte Bilder, ganz schön viel.

    ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung. ;-)
    https://linux.die.net/man/8/hald
    https://github.com/guedou/TS-453Be/blob/master/doc/reversing.md

    Also Du solltest noch mal schauen was im syslog steht, das durch rsyslog geschrieben wird.

    SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.

    Dann würde ich erst einmal die Baustelle mit der defekten Platte, was genau sagt den S.M.A.R.T genau zur Platte, beheben und dann schauen ob der ´load` auf einem akzeptablen Niveau ist.

    Das sagt S.M.A.R.T

    Unbenanntx3.jpg

    Ich werde, nachdem die neue Festplatte drin ist und alles synchronisiert ist, wieder die loads genauer beoabachten und hier berichten.

    VG
    Bernd

    ? Offline
    ? Offline
    Ein ehemaliger Benutzer
    schrieb am zuletzt editiert von Ein ehemaliger Benutzer
    #245

    @schtallone sagte in Performance Probleme durch Shelly Adapter?:

    ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung.

    Moin,

    das sind, glaube ich, zwei unterschiedliche Dinge, habe aber heute Morgen keine Zeit, muss Frauchen bespaßen, und im Bad einiges renovieren.

    @schtallone sagte in Performance Probleme durch Shelly Adapter?:

    SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.

    Nein, die laufen schon, normalerweise, findet man die Log Files unter /var/log/syslog oder die QNAP hat eine APP um Log auf der WEB GUI anzuzeigen.

    VG
    Bernd

    1 Antwort Letzte Antwort
    0
    • S Offline
      S Offline
      Schtallone
      schrieb am zuletzt editiert von
      #246

      @dp20eic said in Performance Probleme durch Shelly Adapter?:

      @schtallone sagte in Performance Probleme durch Shelly Adapter?:

      ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung.

      @schtallone sagte in Performance Probleme durch Shelly Adapter?:

      SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.

      Nein, die laufen schon, normalerweise, findet man die Log Files unter /var/log/syslog oder die QNAP hat eine APP um Log auf der WEB GUI anzuzeigen.

      VG
      Bernd

      Ich bin per WINSCP mal auf die Suchge nach dem syslog gegangen und nicht fündig geworden. Es gibt aber ein QNAP-log:

      2023-09-16 13:12:18,851 [Information] [Database] initialize
      2023-09-16 13:12:19,116 [Information] [Database] initialize database
      2023-09-16 13:12:19,120 [Information] [Database] initialize function
      2023-09-16 13:12:19,122 [Information] [Database] initialize procedure
      2023-09-16 13:12:19,181 [Information] [Database] initialize device table
      2023-09-16 13:12:19,266 [Information] [Database] initialize filter tables
      2023-09-16 13:12:19,285 [Information] [Database] initialize highlight tables
      2023-09-16 13:12:19,285 [Information] [Database] initialize receiver table
      2023-09-16 13:12:19,413 [Information] [Database] initialize local_event log table
      2023-09-16 13:12:19,446 [Information] [Database] initialize remote_event log table
      2023-09-16 13:12:19,448 [Information] [Database] initialize local_access access table
      2023-09-16 13:12:19,449 [Information] [Database] initialize remote_access access table
      2023-09-16 13:12:19,504 [Information] [Compatible] notify_send = 0x7f5bc925eff0
      2023-09-16 13:12:19,504 [Information] [Compatible] naslog_notice_send = 0x7f5bc925ea20
      2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user = 0x7f5bc8ff9f00
      2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user_v1 = 0x7f5bc8ff9fc0
      2023-09-16 13:12:19,504 [Information] [qulog] service pid(13801) start.
      2023-09-16 13:12:19,507 [Information] [SyslogClientManager] load system default adapter mac address [24:5e:be:3b:f1:9f]
      2023-09-16 13:12:19,508 [Information] [SyslogClientManager] start threading
      2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read  I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 ..
      2023-09-16 13:12:38,660 [Warning] [A049, C009, 39] [Hardware Status] "Host: 3.5" SATA HDD 1": Medium error. Run a bad block scan on the drive. Replace the drive if the error persists.
      2023-09-16 13:12:39,840 [Information] [A007, C001, 18] [Power] The system has started.
      2023-09-16 13:12:39,864 [Information] [A201, reserved, 0153] [Network & Virtual Switch] Initialized Network & Virtual Switch.
      2023-09-16 13:12:39,868 [Information] [A201, C012, 0115] [Network & Virtual Switch] Set "Virtual Switch 4" as the system default gateway.
      2023-09-16 13:12:39,871 [Information] [A201, C012, 0185] [Network & Virtual Switch] Configured "Virtual Switch 4" as system default gateway.
      2023-09-16 13:13:14,994 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.86.155".
      2023-09-16 13:13:20,626 [Information] [A051, C001, 4] [Multimedia Console] Started Multimedia Services.
      2023-09-16 13:13:48,885 [Information] [A039, C002, 22] [App Center] Started Media Streaming Add-on.
      2023-09-16 13:14:49,547 [Information] [, , ] Starting Plex Media Server...
      2023-09-16 13:17:11,154 [Information] [A041, C003, 31] [myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready.
      2023-09-16 13:17:12,959 [Information] [A041, C003, 28] [myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready.
      2023-09-16 13:29:52,626 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically".
      2023-09-16 13:29:58,322 [Information] [A039, C005, 99] [App Center] Finished app update check.
      2023-09-16 14:04:51,180 [Information] [A214, C005, 5003] [Container Station] Removing volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f".
      2023-09-16 14:04:55,026 [Information] [A214, C005, 5004] [Container Station] Removed volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f".
      2023-09-16 14:04:56,515 [Information] [A214, C005, 5003] [Container Station] Removing volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098".
      2023-09-16 14:04:57,653 [Information] [A214, C005, 5004] [Container Station] Removed volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098".
      2023-09-16 14:04:59,037 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-ini".
      2023-09-16 14:05:01,222 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-ini".
      2023-09-16 14:05:03,183 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-storage".
      2023-09-16 14:05:05,544 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-storage".
      2023-09-16 14:05:07,878 [Information] [A214, C005, 5003] [Container Station] Removing volume "iobroker_data".
      2023-09-16 14:05:10,541 [Information] [A214, C005, 5004] [Container Station] Removed volume "iobroker_data".
      2023-09-16 14:05:43,050 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08".
      2023-09-16 14:06:12,825 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08".
      2023-09-16 14:06:13,782 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45".
      2023-09-16 14:06:20,015 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45".
      2023-09-16 14:09:05,577 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 13:46:01 ~ 2023-09-16 14:09:03.
      2023-09-16 14:53:15,534 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.81.138".
      2023-09-16 15:06:04,155 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 14:46:01 ~ 2023-09-16 15:06:03.
      2023-09-16 16:12:04,036 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 15:46:02 ~ 2023-09-16 16:12:02.
      2023-09-16 17:06:02,642 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 16:46:01 ~ 2023-09-16 17:06:01.
      2023-09-16 18:10:04,809 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 17:46:01 ~ 2023-09-16 18:10:02.
      2023-09-16 19:07:03,187 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 18:46:01 ~ 2023-09-16 19:07:02.
      2023-09-16 20:12:02,938 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 19:46:02 ~ 2023-09-16 20:12:01.
      2023-09-16 20:59:45,699 [Information] [A039, C002, 23] [App Center] Stopped Video Station.
      2023-09-16 21:00:10,610 [Information] [A039, C002, 23] [App Center] Stopped SSD Profiling Tool.
      2023-09-16 21:04:02,685 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 20:46:03 ~ 2023-09-16 21:04:01.
      2023-09-16 22:12:03,189 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 21:46:01 ~ 2023-09-16 22:12:02.
      2023-09-16 23:08:02,900 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically".
      2023-09-16 23:08:05,655 [Information] [A039, C005, 99] [App Center] Finished app update check.
      2023-09-16 23:09:02,852 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 22:46:02 ~ 2023-09-16 23:09:01.
      2023-09-17 00:00:26,326 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D".
      2023-09-17 00:01:04,831 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic.
      2023-09-17 00:12:02,330 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 23:46:01 ~ 2023-09-17 00:12:01.
      2023-09-17 00:56:17,218 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1.
      2023-09-17 01:00:11,609 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1.
      2023-09-17 01:00:34,538 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1.
      2023-09-17 01:00:35,236 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0.
      2023-09-17 01:00:38,894 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-12_0101". LUN: iSCSI_0.
      2023-09-17 01:00:39,550 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created.
      2023-09-17 01:00:45,080 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0.
      2023-09-17 01:12:05,441 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 00:46:01 ~ 2023-09-17 01:12:01.
      2023-09-17 01:15:24,896 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D".
      2023-09-17 02:12:02,485 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 01:46:01 ~ 2023-09-17 02:12:01.
      2023-09-17 03:00:07,075 [Information] [A227, C001, 1] [Malware Remover] Started scanning.
      2023-09-17 03:02:30,834 [Information] [A227, C001, 19] [Malware Remover] Scan completed.
      2023-09-17 03:11:10,538 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 02:46:00 ~ 2023-09-17 03:11:08.
      2023-09-17 04:12:02,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 03:46:01 ~ 2023-09-17 04:12:01.
      2023-09-17 05:01:59,297 [Information] [A293, C004, 28] [QuFirewall] Updated the PSIRT tor deny list from version 20230914 to version 20230916.
      2023-09-17 05:01:59,370 [Information] [A293, C004, 27] [QuFirewall] Updated the PSIRT database from version 20230914 to version 20230916.
      2023-09-17 05:27:02,551 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 04:46:01 ~ 2023-09-17 05:27:02.
      2023-09-17 06:12:01,451 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 05:46:01 ~ 2023-09-17 06:12:01.
      2023-09-17 07:11:01,729 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 06:46:01 ~ 2023-09-17 07:11:01.
      2023-09-17 08:00:03,171 [Information] [A227, C001, 43] [Malware Remover] Started automatically updating the application.
      2023-09-17 08:00:04,873 [Information] [A227, C001, 44] [Malware Remover] Finished automatic update check. No new software version found.
      2023-09-17 08:12:02,380 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 07:46:01 ~ 2023-09-17 08:12:01.
      2023-09-17 09:11:05,122 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 08:46:01 ~ 2023-09-17 09:11:02.
      2023-09-17 10:07:02,458 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 09:46:01 ~ 2023-09-17 10:07:01.
      2023-09-17 11:04:01,952 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 10:46:02 ~ 2023-09-17 11:04:01.
      2023-09-17 11:04:34,180 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
      2023-09-17 11:04:58,446 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk.
      2023-09-17 11:08:26,477 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
      2023-09-17 11:09:27,611 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin.
      2023-09-17 11:48:36,743 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
      2023-09-17 11:57:19,373 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core.
      2023-09-17 11:57:44,188 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
      2023-09-17 12:09:02,617 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 11:46:01 ~ 2023-09-17 12:09:01.
      2023-09-17 12:12:06,683 [Information] [A039, C002, 22] [App Center] Started Container Station.
      2023-09-17 12:13:00,068 [Information] [A039, C002, 22] [App Center] Started QNAP AI Core.
      2023-09-17 12:57:04,373 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 12:46:01 ~ 2023-09-17 12:57:02.
      2023-09-17 13:53:08,885 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop".
      2023-09-17 13:53:15,958 [Information] [A039, C001, 47] [App Center] IOtop enabled.
      2023-09-17 13:55:17,880 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop".
      2023-09-17 13:55:24,806 [Information] [A039, C001, 47] [App Center] IOtop enabled.
      2023-09-17 13:55:27,913 [Information] [A039, C001, 88] [App Center] Updated IOtop from 0.1.1.1 to 0.1.1.1   .
      2023-09-17 13:59:02,896 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 13:46:01 ~ 2023-09-17 13:59:01.
      2023-09-17 14:49:02,240 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 14:46:02 ~ 2023-09-17 14:49:01.
      2023-09-17 14:53:19,104 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.90.229".
      2023-09-17 16:00:02,195 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 15:46:01 ~ 2023-09-17 16:00:01.
      2023-09-17 16:59:01,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 16:46:01 ~ 2023-09-17 16:59:01.
      2023-09-17 17:36:59,061 [Information] [A039, C002, 23] [App Center] Stopped License Center.
      2023-09-17 17:37:05,815 [Information] [A039, C002, 23] [App Center] Stopped Malware Remover.
      2023-09-17 17:37:06,716 [Information] [A039, C002, 23] [App Center] Stopped Media Streaming Add-on.
      2023-09-17 17:37:12,474 [Information] [A039, C002, 23] [App Center] Stopped Qboost.
      2023-09-17 17:37:13,326 [Information] [, , ] Stopping Plex Media Server...
      2023-09-17 17:37:21,092 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core.
      2023-09-17 17:37:22,802 [Information] [A039, C002, 23] [App Center] Stopped Plex Media Server.
      2023-09-17 17:37:44,476 [Information] [A039, C002, 23] [App Center] Stopped Qsync Central.
      2023-09-17 17:37:50,078 [Information] [A039, C002, 23] [App Center] Stopped myQNAPcloud Link.
      2023-09-17 17:38:02,055 [Information] [A039, C002, 23] [App Center] Stopped QuMagie.
      2023-09-17 17:38:15,968 [Information] [A039, C002, 23] [App Center] Stopped QuFirewall.
      2023-09-17 17:38:18,494 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
      2023-09-17 17:38:30,707 [Information] [A039, C002, 23] [App Center] Stopped Security Center.
      2023-09-17 17:38:41,127 [Information] [A039, C002, 23] [App Center] Stopped Hybrid Backup Sync.
      2023-09-17 17:38:58,104 [Information] [A039, C002, 23] [App Center] Stopped Multimedia Console.
      2023-09-17 17:40:14,480 [Information] [A039, C002, 22] [App Center] Started Qboost.
      2023-09-17 17:41:51,978 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin.
      2023-09-17 17:41:52,169 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk.
      2023-09-17 17:41:57,535 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
      2023-09-17 17:42:29,297 [Information] [A039, C002, 23] [App Center] Stopped Qboost.
      2023-09-17 19:03:38,657 [Information] [A039, C002, 22] [App Center] Started Container Station.
      2023-09-17 19:16:25,066 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
      2023-09-17 19:40:16,050 [Information] [A039, C005, 89] [App Center] Enabled "Allow installation of applications without a valid digital signature".
      2023-09-17 19:46:07,160 [Information] [A039, C005, 91] [App Center] Added an app repository.
      2023-09-17 19:46:54,798 [Information] [A039, C005, 93] [App Center] Deleted an app repository.
      2023-09-17 19:47:23,352 [Information] [A039, C005, 95] [App Center] Disabled app update checks.
      2023-09-17 19:50:16,494 [Information] [A039, C001, 46] [App Center] Installed htop (CLI) 3.0.0.1 in "/share/CACHEDEV1_DATA/.qpkg/HTOP".
      2023-09-17 19:50:22,390 [Information] [A039, C001, 47] [App Center] htop (CLI) enabled.
      2023-09-17 19:50:47,113 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version.
      2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.
      2023-09-17 20:00:38,255 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version.
      2023-09-17 20:01:30,018 [Information] [A039, C002, 22] [App Center] Started Qboost.
      2023-09-17 20:01:51,227 [Information] [A039, C002, 22] [App Center] Started Container Station.
      2023-09-17 20:02:07,553 [Information] [A039, C002, 22] [App Center] Started Hybrid Backup Sync.
      2023-09-17 20:58:33,452 [Information] [A039, C002, 23] [App Center] Stopped htop (CLI).
      2023-09-17 20:58:39,400 [Information] [A039, C002, 23] [App Center] Stopped IOtop.
      2023-09-17 21:00:21,936 [Information] [A041, C003, 14] [myQNAPcloud] Disabled myQNAPcloud Link.
      2023-09-17 21:00:29,324 [Information] [A041, C002, 12] [myQNAPcloud] Disabled DDNS.
      2023-09-18 00:00:16,206 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D".
      2023-09-18 00:00:57,650 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic.
      2023-09-18 01:00:08,447 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1.
      2023-09-18 01:00:30,336 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1.
      2023-09-18 01:00:30,953 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0.
      2023-09-18 01:00:33,643 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-13_0100". LUN: iSCSI_0.
      2023-09-18 01:00:34,527 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created.
      2023-09-18 01:00:38,254 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0.
      2023-09-18 01:13:49,899 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1.
      2023-09-18 01:24:45,585 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D".
      2023-09-18 07:43:31,262 [Information] [A039, C002, 22] [App Center] Started htop (CLI).
      
      
      HomoranH 1 Antwort Letzte Antwort
      0
      • S Schtallone

        @dp20eic said in Performance Probleme durch Shelly Adapter?:

        @schtallone sagte in Performance Probleme durch Shelly Adapter?:

        ich habe das zu hal_deamon gefunden, kann aber nicht wirklich etwas damit anfangen, weil...--> keine Ahnung.

        @schtallone sagte in Performance Probleme durch Shelly Adapter?:

        SInd das auch Befehle unter LINUX? Beide gehen auf der QNAP nicht bzw. müssten dann erst noch installiert werden. MElde ich mich morgen dann zu.

        Nein, die laufen schon, normalerweise, findet man die Log Files unter /var/log/syslog oder die QNAP hat eine APP um Log auf der WEB GUI anzuzeigen.

        VG
        Bernd

        Ich bin per WINSCP mal auf die Suchge nach dem syslog gegangen und nicht fündig geworden. Es gibt aber ein QNAP-log:

        2023-09-16 13:12:18,851 [Information] [Database] initialize
        2023-09-16 13:12:19,116 [Information] [Database] initialize database
        2023-09-16 13:12:19,120 [Information] [Database] initialize function
        2023-09-16 13:12:19,122 [Information] [Database] initialize procedure
        2023-09-16 13:12:19,181 [Information] [Database] initialize device table
        2023-09-16 13:12:19,266 [Information] [Database] initialize filter tables
        2023-09-16 13:12:19,285 [Information] [Database] initialize highlight tables
        2023-09-16 13:12:19,285 [Information] [Database] initialize receiver table
        2023-09-16 13:12:19,413 [Information] [Database] initialize local_event log table
        2023-09-16 13:12:19,446 [Information] [Database] initialize remote_event log table
        2023-09-16 13:12:19,448 [Information] [Database] initialize local_access access table
        2023-09-16 13:12:19,449 [Information] [Database] initialize remote_access access table
        2023-09-16 13:12:19,504 [Information] [Compatible] notify_send = 0x7f5bc925eff0
        2023-09-16 13:12:19,504 [Information] [Compatible] naslog_notice_send = 0x7f5bc925ea20
        2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user = 0x7f5bc8ff9f00
        2023-09-16 13:12:19,504 [Information] [Compatible] shm_get_all_user_v1 = 0x7f5bc8ff9fc0
        2023-09-16 13:12:19,504 [Information] [qulog] service pid(13801) start.
        2023-09-16 13:12:19,507 [Information] [SyslogClientManager] load system default adapter mac address [24:5e:be:3b:f1:9f]
        2023-09-16 13:12:19,508 [Information] [SyslogClientManager] start threading
        2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read  I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 ..
        2023-09-16 13:12:38,660 [Warning] [A049, C009, 39] [Hardware Status] "Host: 3.5" SATA HDD 1": Medium error. Run a bad block scan on the drive. Replace the drive if the error persists.
        2023-09-16 13:12:39,840 [Information] [A007, C001, 18] [Power] The system has started.
        2023-09-16 13:12:39,864 [Information] [A201, reserved, 0153] [Network & Virtual Switch] Initialized Network & Virtual Switch.
        2023-09-16 13:12:39,868 [Information] [A201, C012, 0115] [Network & Virtual Switch] Set "Virtual Switch 4" as the system default gateway.
        2023-09-16 13:12:39,871 [Information] [A201, C012, 0185] [Network & Virtual Switch] Configured "Virtual Switch 4" as system default gateway.
        2023-09-16 13:13:14,994 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.86.155".
        2023-09-16 13:13:20,626 [Information] [A051, C001, 4] [Multimedia Console] Started Multimedia Services.
        2023-09-16 13:13:48,885 [Information] [A039, C002, 22] [App Center] Started Media Streaming Add-on.
        2023-09-16 13:14:49,547 [Information] [, , ] Starting Plex Media Server...
        2023-09-16 13:17:11,154 [Information] [A041, C003, 31] [myQNAPcloud] myQNAPcloud Link service for myQNAPcloud website is ready.
        2023-09-16 13:17:12,959 [Information] [A041, C003, 28] [myQNAPcloud] myQNAPcloud Link service for mobile and PC applications is ready.
        2023-09-16 13:29:52,626 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically".
        2023-09-16 13:29:58,322 [Information] [A039, C005, 99] [App Center] Finished app update check.
        2023-09-16 14:04:51,180 [Information] [A214, C005, 5003] [Container Station] Removing volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f".
        2023-09-16 14:04:55,026 [Information] [A214, C005, 5004] [Container Station] Removed volume "2cb9fb6286b77ba6be07d0983700bbcd7f6fda3877feb4b31f9cdb8ec28d0f7f".
        2023-09-16 14:04:56,515 [Information] [A214, C005, 5003] [Container Station] Removing volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098".
        2023-09-16 14:04:57,653 [Information] [A214, C005, 5004] [Container Station] Removed volume "08d9cd6a7cda0139615506d87ec4c154c06c0d41f0d431b5b1a3df5c1a877098".
        2023-09-16 14:04:59,037 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-ini".
        2023-09-16 14:05:01,222 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-ini".
        2023-09-16 14:05:03,183 [Information] [A214, C005, 5003] [Container Station] Removing volume "grafana-storage".
        2023-09-16 14:05:05,544 [Information] [A214, C005, 5004] [Container Station] Removed volume "grafana-storage".
        2023-09-16 14:05:07,878 [Information] [A214, C005, 5003] [Container Station] Removing volume "iobroker_data".
        2023-09-16 14:05:10,541 [Information] [A214, C005, 5004] [Container Station] Removed volume "iobroker_data".
        2023-09-16 14:05:43,050 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08".
        2023-09-16 14:06:12,825 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:0ea5f9b58fb2ca54cc85a1d2767aee56a47a7d742043eb188cfe45e339482b08".
        2023-09-16 14:06:13,782 [Information] [A214, C004, 4014] [Container Station] Removing image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45".
        2023-09-16 14:06:20,015 [Information] [A214, C004, 4015] [Container Station] Removed image "sha256:7f20d3b8b9d75287cbdb36393ef49cfd08faafa2ad56416c741e4b4311079c45".
        2023-09-16 14:09:05,577 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 13:46:01 ~ 2023-09-16 14:09:03.
        2023-09-16 14:53:15,534 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.81.138".
        2023-09-16 15:06:04,155 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 14:46:01 ~ 2023-09-16 15:06:03.
        2023-09-16 16:12:04,036 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 15:46:02 ~ 2023-09-16 16:12:02.
        2023-09-16 17:06:02,642 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 16:46:01 ~ 2023-09-16 17:06:01.
        2023-09-16 18:10:04,809 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 17:46:01 ~ 2023-09-16 18:10:02.
        2023-09-16 19:07:03,187 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 18:46:01 ~ 2023-09-16 19:07:02.
        2023-09-16 20:12:02,938 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 19:46:02 ~ 2023-09-16 20:12:01.
        2023-09-16 20:59:45,699 [Information] [A039, C002, 23] [App Center] Stopped Video Station.
        2023-09-16 21:00:10,610 [Information] [A039, C002, 23] [App Center] Stopped SSD Profiling Tool.
        2023-09-16 21:04:02,685 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 20:46:03 ~ 2023-09-16 21:04:01.
        2023-09-16 22:12:03,189 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 21:46:01 ~ 2023-09-16 22:12:02.
        2023-09-16 23:08:02,900 [Information] [A039, C005, 98] [App Center] Started app update check. The current setting is to "Install required updates automatically".
        2023-09-16 23:08:05,655 [Information] [A039, C005, 99] [App Center] Finished app update check.
        2023-09-16 23:09:02,852 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 22:46:02 ~ 2023-09-16 23:09:01.
        2023-09-17 00:00:26,326 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D".
        2023-09-17 00:01:04,831 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic.
        2023-09-17 00:12:02,330 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-16 23:46:01 ~ 2023-09-17 00:12:01.
        2023-09-17 00:56:17,218 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1.
        2023-09-17 01:00:11,609 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1.
        2023-09-17 01:00:34,538 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1.
        2023-09-17 01:00:35,236 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0.
        2023-09-17 01:00:38,894 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-12_0101". LUN: iSCSI_0.
        2023-09-17 01:00:39,550 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created.
        2023-09-17 01:00:45,080 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0.
        2023-09-17 01:12:05,441 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 00:46:01 ~ 2023-09-17 01:12:01.
        2023-09-17 01:15:24,896 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D".
        2023-09-17 02:12:02,485 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 01:46:01 ~ 2023-09-17 02:12:01.
        2023-09-17 03:00:07,075 [Information] [A227, C001, 1] [Malware Remover] Started scanning.
        2023-09-17 03:02:30,834 [Information] [A227, C001, 19] [Malware Remover] Scan completed.
        2023-09-17 03:11:10,538 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 02:46:00 ~ 2023-09-17 03:11:08.
        2023-09-17 04:12:02,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 03:46:01 ~ 2023-09-17 04:12:01.
        2023-09-17 05:01:59,297 [Information] [A293, C004, 28] [QuFirewall] Updated the PSIRT tor deny list from version 20230914 to version 20230916.
        2023-09-17 05:01:59,370 [Information] [A293, C004, 27] [QuFirewall] Updated the PSIRT database from version 20230914 to version 20230916.
        2023-09-17 05:27:02,551 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 04:46:01 ~ 2023-09-17 05:27:02.
        2023-09-17 06:12:01,451 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 05:46:01 ~ 2023-09-17 06:12:01.
        2023-09-17 07:11:01,729 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 06:46:01 ~ 2023-09-17 07:11:01.
        2023-09-17 08:00:03,171 [Information] [A227, C001, 43] [Malware Remover] Started automatically updating the application.
        2023-09-17 08:00:04,873 [Information] [A227, C001, 44] [Malware Remover] Finished automatic update check. No new software version found.
        2023-09-17 08:12:02,380 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 07:46:01 ~ 2023-09-17 08:12:01.
        2023-09-17 09:11:05,122 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 08:46:01 ~ 2023-09-17 09:11:02.
        2023-09-17 10:07:02,458 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 09:46:01 ~ 2023-09-17 10:07:01.
        2023-09-17 11:04:01,952 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 10:46:02 ~ 2023-09-17 11:04:01.
        2023-09-17 11:04:34,180 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
        2023-09-17 11:04:58,446 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk.
        2023-09-17 11:08:26,477 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
        2023-09-17 11:09:27,611 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin.
        2023-09-17 11:48:36,743 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
        2023-09-17 11:57:19,373 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core.
        2023-09-17 11:57:44,188 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
        2023-09-17 12:09:02,617 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 11:46:01 ~ 2023-09-17 12:09:01.
        2023-09-17 12:12:06,683 [Information] [A039, C002, 22] [App Center] Started Container Station.
        2023-09-17 12:13:00,068 [Information] [A039, C002, 22] [App Center] Started QNAP AI Core.
        2023-09-17 12:57:04,373 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 12:46:01 ~ 2023-09-17 12:57:02.
        2023-09-17 13:53:08,885 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop".
        2023-09-17 13:53:15,958 [Information] [A039, C001, 47] [App Center] IOtop enabled.
        2023-09-17 13:55:17,880 [Information] [A039, C001, 46] [App Center] Installed IOtop 0.1.1.1 in "/share/CACHEDEV1_DATA/.qpkg/IOTop".
        2023-09-17 13:55:24,806 [Information] [A039, C001, 47] [App Center] IOtop enabled.
        2023-09-17 13:55:27,913 [Information] [A039, C001, 88] [App Center] Updated IOtop from 0.1.1.1 to 0.1.1.1   .
        2023-09-17 13:59:02,896 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 13:46:01 ~ 2023-09-17 13:59:01.
        2023-09-17 14:49:02,240 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 14:46:02 ~ 2023-09-17 14:49:01.
        2023-09-17 14:53:19,104 [Information] [A041, C002, 15] [myQNAPcloud] DDNS updated WAN IP address to "178.19.90.229".
        2023-09-17 16:00:02,195 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 15:46:01 ~ 2023-09-17 16:00:01.
        2023-09-17 16:59:01,826 [Information] [A293, C003, 13] [QuFirewall] Reached alert message threshold. Threshold value: 50, Time interval: 2023-09-17 16:46:01 ~ 2023-09-17 16:59:01.
        2023-09-17 17:36:59,061 [Information] [A039, C002, 23] [App Center] Stopped License Center.
        2023-09-17 17:37:05,815 [Information] [A039, C002, 23] [App Center] Stopped Malware Remover.
        2023-09-17 17:37:06,716 [Information] [A039, C002, 23] [App Center] Stopped Media Streaming Add-on.
        2023-09-17 17:37:12,474 [Information] [A039, C002, 23] [App Center] Stopped Qboost.
        2023-09-17 17:37:13,326 [Information] [, , ] Stopping Plex Media Server...
        2023-09-17 17:37:21,092 [Information] [A039, C002, 23] [App Center] Stopped QNAP AI Core.
        2023-09-17 17:37:22,802 [Information] [A039, C002, 23] [App Center] Stopped Plex Media Server.
        2023-09-17 17:37:44,476 [Information] [A039, C002, 23] [App Center] Stopped Qsync Central.
        2023-09-17 17:37:50,078 [Information] [A039, C002, 23] [App Center] Stopped myQNAPcloud Link.
        2023-09-17 17:38:02,055 [Information] [A039, C002, 23] [App Center] Stopped QuMagie.
        2023-09-17 17:38:15,968 [Information] [A039, C002, 23] [App Center] Stopped QuFirewall.
        2023-09-17 17:38:18,494 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
        2023-09-17 17:38:30,707 [Information] [A039, C002, 23] [App Center] Stopped Security Center.
        2023-09-17 17:38:41,127 [Information] [A039, C002, 23] [App Center] Stopped Hybrid Backup Sync.
        2023-09-17 17:38:58,104 [Information] [A039, C002, 23] [App Center] Stopped Multimedia Console.
        2023-09-17 17:40:14,480 [Information] [A039, C002, 22] [App Center] Started Qboost.
        2023-09-17 17:41:51,978 [Information] [A234, C003, 1] [Qboost] Successfully emptied the Recycle Bin.
        2023-09-17 17:41:52,169 [Information] [A234, C003, 2] [Qboost] Successfully deleted the system junk.
        2023-09-17 17:41:57,535 [Information] [A234, C001, 3] [Qboost] Successfully cleared the memory cache.
        2023-09-17 17:42:29,297 [Information] [A039, C002, 23] [App Center] Stopped Qboost.
        2023-09-17 19:03:38,657 [Information] [A039, C002, 22] [App Center] Started Container Station.
        2023-09-17 19:16:25,066 [Information] [A039, C002, 23] [App Center] Stopped Container Station.
        2023-09-17 19:40:16,050 [Information] [A039, C005, 89] [App Center] Enabled "Allow installation of applications without a valid digital signature".
        2023-09-17 19:46:07,160 [Information] [A039, C005, 91] [App Center] Added an app repository.
        2023-09-17 19:46:54,798 [Information] [A039, C005, 93] [App Center] Deleted an app repository.
        2023-09-17 19:47:23,352 [Information] [A039, C005, 95] [App Center] Disabled app update checks.
        2023-09-17 19:50:16,494 [Information] [A039, C001, 46] [App Center] Installed htop (CLI) 3.0.0.1 in "/share/CACHEDEV1_DATA/.qpkg/HTOP".
        2023-09-17 19:50:22,390 [Information] [A039, C001, 47] [App Center] htop (CLI) enabled.
        2023-09-17 19:50:47,113 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version.
        2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.
        2023-09-17 20:00:38,255 [Error] [, , ] Iftop 1.0.0 installation failed. Error Firmware version, please downgrade to QTS 5.0.0 or older version.
        2023-09-17 20:01:30,018 [Information] [A039, C002, 22] [App Center] Started Qboost.
        2023-09-17 20:01:51,227 [Information] [A039, C002, 22] [App Center] Started Container Station.
        2023-09-17 20:02:07,553 [Information] [A039, C002, 22] [App Center] Started Hybrid Backup Sync.
        2023-09-17 20:58:33,452 [Information] [A039, C002, 23] [App Center] Stopped htop (CLI).
        2023-09-17 20:58:39,400 [Information] [A039, C002, 23] [App Center] Stopped IOtop.
        2023-09-17 21:00:21,936 [Information] [A041, C003, 14] [myQNAPcloud] Disabled myQNAPcloud Link.
        2023-09-17 21:00:29,324 [Information] [A041, C002, 12] [myQNAPcloud] Disabled DDNS.
        2023-09-18 00:00:16,206 [Information] [A200, C002, 8] [Hybrid Backup Sync] Started Backup job: "Backup QNAP TS-251D".
        2023-09-18 00:00:57,650 [Information] [A200, C002, 131] [Hybrid Backup Sync] Backup job "Backup QNAP TS-251D": Using network interface "Virtual Switch 4". Interface selection: Automatic.
        2023-09-18 01:00:08,447 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. Volume: Datenvolumen1.
        2023-09-18 01:00:30,336 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. Volume: Datenvolumen1.
        2023-09-18 01:00:30,953 [Information] [A002, C012, 222] [Storage & Snapshots] Started creating scheduled snapshot. LUN: iSCSI_0.
        2023-09-18 01:00:33,643 [Information] [A002, C012, 229] [Storage & Snapshots] Deleted snapshot "GMT+01_2023-09-13_0100". LUN: iSCSI_0.
        2023-09-18 01:00:34,527 [Information] [A002, C012, 791] [Storage & Snapshots] Reached volume/LUN snapshot limit. LUN: iSCSI_0. The oldest snapshot will be deleted whenever a new snapshot is created.
        2023-09-18 01:00:38,254 [Information] [A002, C012, 223] [Storage & Snapshots] Finished creating scheduled snapshot. LUN: iSCSI_0.
        2023-09-18 01:13:49,899 [Information] [A002, C012, 216] [Storage & Snapshots] Finished creating snapshot "Replication-Job0". Volume: Datenvolumen1.
        2023-09-18 01:24:45,585 [Information] [A200, C002, 15] [Hybrid Backup Sync] Finished Backup job: "Backup QNAP TS-251D".
        2023-09-18 07:43:31,262 [Information] [A039, C002, 22] [App Center] Started htop (CLI).
        
        
        HomoranH Nicht stören
        HomoranH Nicht stören
        Homoran
        Global Moderator Administrators
        schrieb am zuletzt editiert von
        #247

        @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read  I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 ..                                                                    
        

        Da ist das Problem mit den I/O, was sehr wahrscheinlich die Ursache für die hohe Load ist.

        @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.                                                                    
        

        was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.

        kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

        Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

        der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

        S 1 Antwort Letzte Antwort
        0
        • HomoranH Homoran

          @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                  2023-09-16 13:12:37,788 [Warning] [A049, C009, 38] [Hardware Status] "Host: 3.5" SATA HDD 1": Read  I/O error, "UNRECOVERED READ ERROR ", sense_key=0x3, asc=0x11, ascq=0x4, CDB=88 00 00 00 00 01 d0 b1 45 c0 00 00 04 00 00 00 ..                                                                    
          

          Da ist das Problem mit den I/O, was sehr wahrscheinlich die Ursache für die hohe Load ist.

          @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                  2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.                                                                    
          

          was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.

          S Offline
          S Offline
          Schtallone
          schrieb am zuletzt editiert von
          #248

          @homoran said in Performance Probleme durch Shelly Adapter?:

          @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                  2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.                                                                    
          

          was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.

          Ja, ich war gestern auf der Suche nach einer möglichkeit, TOP auf dem NAS laufen zu lassen. Dabei gab es ein paar Versionen zu Auswahl, ohne das da eine Kompatiblität stand. Ich habe das richtige aber gefunden.

          HomoranH 1 Antwort Letzte Antwort
          0
          • S Schtallone

            @homoran said in Performance Probleme durch Shelly Adapter?:

            @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                                    2023-09-17 19:51:07,636 [Error] [A039, C001, 41] [App Center] Failed to install GoTop. Downgrade QTS to 5.0.0 or an older compatible version.                                                                    
            

            was auch immer das war. da passt die App nicht zu deinem QTS, was auch immer das ist.

            Ja, ich war gestern auf der Suche nach einer möglichkeit, TOP auf dem NAS laufen zu lassen. Dabei gab es ein paar Versionen zu Auswahl, ohne das da eine Kompatiblität stand. Ich habe das richtige aber gefunden.

            HomoranH Nicht stören
            HomoranH Nicht stören
            Homoran
            Global Moderator Administrators
            schrieb am zuletzt editiert von
            #249

            @schtallone sagte in Performance Probleme durch Shelly Adapter?:

            TOP auf dem NAS laufen zu lassen.

            und dafür braucht es eine APP???

            man tippt einfach top in der Konsole ein.

            kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

            Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

            der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

            S 1 Antwort Letzte Antwort
            0
            • HomoranH Homoran

              @schtallone sagte in Performance Probleme durch Shelly Adapter?:

              TOP auf dem NAS laufen zu lassen.

              und dafür braucht es eine APP???

              man tippt einfach top in der Konsole ein.

              S Offline
              S Offline
              Schtallone
              schrieb am zuletzt editiert von
              #250

              @homoran
              nicht auf einem NAS, wie ich es habe. Das ist dann jetzt auch keine APP in dem Sinne, sondern ein Befehl über die Konsole

              W 1 Antwort Letzte Antwort
              0
              • S Schtallone

                @homoran
                nicht auf einem NAS, wie ich es habe. Das ist dann jetzt auch keine APP in dem Sinne, sondern ein Befehl über die Konsole

                W Online
                W Online
                Wildbill
                schrieb am zuletzt editiert von
                #251

                @schtallone Und den Befehl bringt eigentlich jedes Linux, und sei es noch so abgespeckt, gleich mit. Einzig htop muss man meist separat installieren, aber top sollte Dein QNAP auch gekannt haben.

                Gruss, Jürgen

                S 1 Antwort Letzte Antwort
                0
                • W Wildbill

                  @schtallone Und den Befehl bringt eigentlich jedes Linux, und sei es noch so abgespeckt, gleich mit. Einzig htop muss man meist separat installieren, aber top sollte Dein QNAP auch gekannt haben.

                  Gruss, Jürgen

                  S Offline
                  S Offline
                  Schtallone
                  schrieb am zuletzt editiert von
                  #252

                  Nabend zusammen,

                  die neue Festplatte ist nun seit ca. 48h verbaut und der RAID-Sync ist seit ca. 20h beendet.

                  Dieses Bild zeigt sich nun, wohlgemerkt mit Docker Containern am laufen...

                  [~] # htop
                  
                    1  [##########################**************** 86.3%]   Tasks: 189, 943 thr; 2 running
                    2  [################################***********97.0%]   Load average: 1.19 1.03 1.01
                    Mem[||||||||||||||||||||||||||#########**4.04G/7.61G]   Uptime: 5 days, 04:08:18
                    Swp[|||                                  1.07G/22.9G]
                  
                    PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
                  32245 1883       20   0  4160  1668   872 S  0.0  0.0  5:08.57 /usr/sbin/mosquitto -c /mosquitto/config/mosquitto.co
                  32121 472        20   0  860M 70084 27064 S  0.0  0.9  5:15.08 grafana server --homepath=/usr/share/grafana --config
                   6144 472        20   0  860M 70084 27064 S  0.0  0.9  0:44.77 grafana server --homepath=/usr/share/grafana --config
                  32454 472        20   0  860M 70084 27064 S  0.0  0.9  0:23.07 grafana server --homepath=/usr/share/grafana --config
                  32458 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.41 grafana server --homepath=/usr/share/grafana --config
                  32459 472        20   0  860M 70084 27064 S  0.0  0.9  0:01.79 grafana server --homepath=/usr/share/grafana --config
                  32460 472        20   0  860M 70084 27064 S  0.0  0.9  0:21.44 grafana server --homepath=/usr/share/grafana --config
                  32461 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.00 grafana server --homepath=/usr/share/grafana --config
                   6166 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.00 grafana server --homepath=/usr/share/grafana --config
                   6167 472        20   0  860M 70084 27064 S  0.0  0.9  0:25.08 grafana server --homepath=/usr/share/grafana --config
                   6168 472        20   0  860M 70084 27064 S  0.0  0.9  0:33.86 grafana server --homepath=/usr/share/grafana --config
                   6170 472        20   0  860M 70084 27064 S  0.0  0.9  0:33.05 grafana server --homepath=/usr/share/grafana --config
                   6172 472        20   0  860M 70084 27064 S  0.0  0.9  0:43.92 grafana server --homepath=/usr/share/grafana --config
                   6173 472        20   0  860M 70084 27064 S  0.0  0.9  0:39.44 grafana server --homepath=/usr/share/grafana --config
                   6174 472        20   0  860M 70084 27064 S  0.0  0.9  0:46.78 grafana server --homepath=/usr/share/grafana --config
                  17640 Peter Pau  20   0 21.0G  189M 49412 S  2.5  2.4 14:19.52 node-red
                   5948 Peter Pau  20   0 3517M  390M  7540 S  5.6  5.0  1h50:26 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                    930 Peter Pau  20   0 3538M  588M 22120 S 27.2  7.6  5h29:50 influxd
                  16260 Peter Pau  20   0 11.5G  514M 15964 S  1.9  6.6  3h58:08 iobroker.js-controller
                  27530 Peter Pau  20   0  906M  109M 13572 S  3.1  1.4  1h41:06 io.shelly.0
                  17650 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:39.55 node-red
                   6362 Peter Pau  20   0 3538M  588M 22120 S  6.8  7.6 22:12.72 influxd
                  17652 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.58 node-red
                  17651 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.54 node-red
                   7166 Peter Pau  20   0 3517M  390M  7540 S  3.1  5.0 51:31.16 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                  17653 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.68 node-red
                   6796 Peter Pau  20   0 3538M  588M 22120 S  0.0  7.6 25:54.77 influxd
                   7605 Peter Pau  20   0 3517M  390M  7540 S  1.9  5.0 30:26.17 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                  18062 Peter Pau  20   0  924M  118M 12944 S  0.0  1.5 25:31.62 io.sourceanalytix.0
                  17641 Peter Pau  20   0  703M 62988 12868 S  0.0  0.8 24:11.34 io.mqtt.0
                   5380 Peter Pau  20   0 31148 21796   160 S  0.0  0.3 17:18.06 Xvnc -nolisten tcp -nolisten local -listen unix -geom
                   6204 Peter Pau  20   0 3538M  588M 22120 S  9.3  7.6 23:05.17 influxd
                   6148 Peter Pau  20   0 3538M  588M 22120 S  0.6  7.6 28:15.44 influxd
                   6774 Peter Pau  20   0 3538M  588M 22120 S  0.0  7.6 17:29.21 influxd
                  27534 Peter Pau  20   0  906M  109M 13572 S  0.0  1.4  2:15.49 io.shelly.0
                  
                  

                  Sieht deutlich besser aus. Hätte nicht gedacht, dass diese SMART MEldung solche Probleme erzeugen kann....

                  Gruß

                  HomoranH 1 Antwort Letzte Antwort
                  0
                  • S Schtallone

                    Nabend zusammen,

                    die neue Festplatte ist nun seit ca. 48h verbaut und der RAID-Sync ist seit ca. 20h beendet.

                    Dieses Bild zeigt sich nun, wohlgemerkt mit Docker Containern am laufen...

                    [~] # htop
                    
                      1  [##########################**************** 86.3%]   Tasks: 189, 943 thr; 2 running
                      2  [################################***********97.0%]   Load average: 1.19 1.03 1.01
                      Mem[||||||||||||||||||||||||||#########**4.04G/7.61G]   Uptime: 5 days, 04:08:18
                      Swp[|||                                  1.07G/22.9G]
                    
                      PID USER      PRI  NI  VIRT   RES   SHR S CPU% MEM%   TIME+  Command
                    32245 1883       20   0  4160  1668   872 S  0.0  0.0  5:08.57 /usr/sbin/mosquitto -c /mosquitto/config/mosquitto.co
                    32121 472        20   0  860M 70084 27064 S  0.0  0.9  5:15.08 grafana server --homepath=/usr/share/grafana --config
                     6144 472        20   0  860M 70084 27064 S  0.0  0.9  0:44.77 grafana server --homepath=/usr/share/grafana --config
                    32454 472        20   0  860M 70084 27064 S  0.0  0.9  0:23.07 grafana server --homepath=/usr/share/grafana --config
                    32458 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.41 grafana server --homepath=/usr/share/grafana --config
                    32459 472        20   0  860M 70084 27064 S  0.0  0.9  0:01.79 grafana server --homepath=/usr/share/grafana --config
                    32460 472        20   0  860M 70084 27064 S  0.0  0.9  0:21.44 grafana server --homepath=/usr/share/grafana --config
                    32461 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.00 grafana server --homepath=/usr/share/grafana --config
                     6166 472        20   0  860M 70084 27064 S  0.0  0.9  0:00.00 grafana server --homepath=/usr/share/grafana --config
                     6167 472        20   0  860M 70084 27064 S  0.0  0.9  0:25.08 grafana server --homepath=/usr/share/grafana --config
                     6168 472        20   0  860M 70084 27064 S  0.0  0.9  0:33.86 grafana server --homepath=/usr/share/grafana --config
                     6170 472        20   0  860M 70084 27064 S  0.0  0.9  0:33.05 grafana server --homepath=/usr/share/grafana --config
                     6172 472        20   0  860M 70084 27064 S  0.0  0.9  0:43.92 grafana server --homepath=/usr/share/grafana --config
                     6173 472        20   0  860M 70084 27064 S  0.0  0.9  0:39.44 grafana server --homepath=/usr/share/grafana --config
                     6174 472        20   0  860M 70084 27064 S  0.0  0.9  0:46.78 grafana server --homepath=/usr/share/grafana --config
                    17640 Peter Pau  20   0 21.0G  189M 49412 S  2.5  2.4 14:19.52 node-red
                     5948 Peter Pau  20   0 3517M  390M  7540 S  5.6  5.0  1h50:26 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                      930 Peter Pau  20   0 3538M  588M 22120 S 27.2  7.6  5h29:50 influxd
                    16260 Peter Pau  20   0 11.5G  514M 15964 S  1.9  6.6  3h58:08 iobroker.js-controller
                    27530 Peter Pau  20   0  906M  109M 13572 S  3.1  1.4  1h41:06 io.shelly.0
                    17650 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:39.55 node-red
                     6362 Peter Pau  20   0 3538M  588M 22120 S  6.8  7.6 22:12.72 influxd
                    17652 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.58 node-red
                    17651 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.54 node-red
                     7166 Peter Pau  20   0 3517M  390M  7540 S  3.1  5.0 51:31.16 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                    17653 Peter Pau  20   0 21.0G  189M 49412 S  0.0  2.4  0:38.68 node-red
                     6796 Peter Pau  20   0 3538M  588M 22120 S  0.0  7.6 25:54.77 influxd
                     7605 Peter Pau  20   0 3517M  390M  7540 S  1.9  5.0 30:26.17 /usr/bin/java -XX:-UsePerfData -Dawt.useSystemAAFontS
                    18062 Peter Pau  20   0  924M  118M 12944 S  0.0  1.5 25:31.62 io.sourceanalytix.0
                    17641 Peter Pau  20   0  703M 62988 12868 S  0.0  0.8 24:11.34 io.mqtt.0
                     5380 Peter Pau  20   0 31148 21796   160 S  0.0  0.3 17:18.06 Xvnc -nolisten tcp -nolisten local -listen unix -geom
                     6204 Peter Pau  20   0 3538M  588M 22120 S  9.3  7.6 23:05.17 influxd
                     6148 Peter Pau  20   0 3538M  588M 22120 S  0.6  7.6 28:15.44 influxd
                     6774 Peter Pau  20   0 3538M  588M 22120 S  0.0  7.6 17:29.21 influxd
                    27534 Peter Pau  20   0  906M  109M 13572 S  0.0  1.4  2:15.49 io.shelly.0
                    
                    

                    Sieht deutlich besser aus. Hätte nicht gedacht, dass diese SMART MEldung solche Probleme erzeugen kann....

                    Gruß

                    HomoranH Nicht stören
                    HomoranH Nicht stören
                    Homoran
                    Global Moderator Administrators
                    schrieb am zuletzt editiert von
                    #253

                    @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                    dass diese SMART MEldung solche Probleme erzeugen kann....

                    nicht die Meldung :joy:

                    die defekte Platte!

                    Die I/O Vorgänge dauerten zu lange und führten zu einem Rückstau, was die load average in die höhe trieb, obwohl die CPU Last noch gut aussah.

                    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                    S 1 Antwort Letzte Antwort
                    0
                    • HomoranH Homoran

                      @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                      dass diese SMART MEldung solche Probleme erzeugen kann....

                      nicht die Meldung :joy:

                      die defekte Platte!

                      Die I/O Vorgänge dauerten zu lange und führten zu einem Rückstau, was die load average in die höhe trieb, obwohl die CPU Last noch gut aussah.

                      S Offline
                      S Offline
                      Schtallone
                      schrieb am zuletzt editiert von
                      #254

                      @homoran
                      ;-)

                      So, und jetzt mache ich mich an die Aufgabe, den Modbus Adapter noch zu pimpen bzw. meine Einstellungen diesbezuglich.

                      2023-09-21 17:25:11.808  - error: dwd.0 (14345) Empty or invalid JSON: Cannot read JSON file: Error: getaddrinfo EAI_AGAIN www.dwd.de
                      2023-09-21 17:25:11.811  - info: dwd.0 (14345) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:25:12.337  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:25:33.624  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:26:04.978  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:27:04.979  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:28:08.027  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:29:08.029  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:29:43.478  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:30:00.177  - info: host.iobroker instance system.adapter.dwd.0 started with pid 14605
                      2023-09-21 17:30:02.111  - info: dwd.0 (14605) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:30:05.211  - info: dwd.0 (14605) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:30:05.758  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:30:43.480  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:30:58.025  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:31:58.026  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:32:54.987  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:33:54.989  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:34:18.026  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:35:00.058  - info: host.iobroker instance system.adapter.dwd.0 started with pid 14859
                      2023-09-21 17:35:01.465  - info: dwd.0 (14859) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:35:02.343  - info: dwd.0 (14859) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:35:02.869  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:35:18.027  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:35:54.992  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:36:54.994  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:37:14.986  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:38:14.987  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:39:24.494  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:40:00.064  - info: host.iobroker instance system.adapter.dwd.0 started with pid 15116
                      2023-09-21 17:40:01.988  - info: dwd.0 (15116) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:40:03.781  - info: dwd.0 (15116) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:40:04.306  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:40:24.495  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:40:44.995  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:41:44.996  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:43:24.498  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:44:24.500  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:45:00.065  - info: host.iobroker instance system.adapter.dwd.0 started with pid 15359
                      2023-09-21 17:45:01.721  - info: dwd.0 (15359) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:45:03.133  - info: dwd.0 (15359) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:45:03.688  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:47:38.049  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:48:38.052  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:48:55.004  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:49:55.007  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:50:00.056  - info: host.iobroker instance system.adapter.dwd.0 started with pid 15615
                      2023-09-21 17:50:01.905  - info: dwd.0 (15615) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:50:03.570  - info: dwd.0 (15615) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:50:04.112  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:50:13.223  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
                      2023-09-21 17:50:55.007  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:51:55.009  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:52:28.070  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:53:28.072  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:55:00.063  - info: host.iobroker instance system.adapter.dwd.0 started with pid 15872
                      2023-09-21 17:55:01.546  - info: dwd.0 (15872) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 17:55:02.457  - info: dwd.0 (15872) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 17:55:02.977  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 17:55:18.079  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:56:18.081  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:56:58.083  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:57:58.086  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 17:58:58.084  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 17:59:58.086  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:00:00.058  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16115
                      2023-09-21 18:00:03.212  - info: dwd.0 (16115) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 18:00:05.863  - info: dwd.0 (16115) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 18:00:06.387  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 18:00:18.082  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:01:18.084  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:02:13.108  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
                      2023-09-21 18:02:35.021  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:02:54.448  - info: shelly.0 (5156) [MQTT] Device with client id "shellyplus1pm-a8032ab96370" connected!
                      2023-09-21 18:03:35.022  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:03:58.089  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:04:58.091  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:05:00.064  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16372
                      2023-09-21 18:05:01.542  - info: dwd.0 (16372) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 18:05:02.768  - info: dwd.0 (16372) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 18:05:03.292  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 18:05:33.516  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
                      2023-09-21 18:07:34.528  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:08:34.532  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:09:05.028  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:10:00.059  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16631
                      2023-09-21 18:10:01.955  - info: dwd.0 (16631) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
                      2023-09-21 18:10:03.758  - info: dwd.0 (16631) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
                      2023-09-21 18:10:04.309  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
                      2023-09-21 18:10:05.030  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:10:48.091  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:11:48.093  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:12:05.040  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      2023-09-21 18:12:23.562  - info: admin.0 (246) ==> Connected system.user.admin from ::ffff:192.168.1.119
                      2023-09-21 18:13:05.042  - info: modbus.0 (1212) Connected to slave 192.168.1.47
                      2023-09-21 18:13:38.096  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
                      

                      DIe Fehler hier stören mich noch, dies werde ich dann aber in diesem Thread weiter machen:

                      link text

                      Dann ist dieses Thread wohl jetzt "als gelöst" anzusehen.

                      Vielen Dank für Eure Unterstützung. Ich habe viel gelernt... DANKE

                      1 Antwort Letzte Antwort
                      0
                      • GlasfaserG Offline
                        GlasfaserG Offline
                        Glasfaser
                        schrieb am zuletzt editiert von
                        #255

                        @schtallone sagte in Performance Probleme durch Shelly Adapter?:

                        Error: getaddrinfo EAI_AGAIN www.dwd.de

                        DIe Fehler hier stören mich noch,

                        Es ist nicht nur noch der Modbus , hast du diesen Fehler immer schon gehabt oder ist der aktuell !?

                        Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..

                        1 Antwort Letzte Antwort
                        0
                        • S Offline
                          S Offline
                          Schtallone
                          schrieb am zuletzt editiert von
                          #256

                          @glasfaser
                          hmm, ist mir so jetzt noch nicht öfter ins auge gefallen. Werde mal diesbezüglich das näher beobachten...

                          1 Antwort Letzte Antwort
                          0
                          Antworten
                          • In einem neuen Thema antworten
                          Anmelden zum Antworten
                          • Älteste zuerst
                          • Neuste zuerst
                          • Meiste Stimmen


                          Support us

                          ioBroker
                          Community Adapters
                          Donate
                          FAQ Cloud / IOT
                          HowTo: Node.js-Update
                          HowTo: Backup/Restore
                          Downloads
                          BLOG

                          762

                          Online

                          32.4k

                          Benutzer

                          81.5k

                          Themen

                          1.3m

                          Beiträge
                          Community
                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                          ioBroker Community 2014-2025
                          logo
                          • Anmelden

                          • Du hast noch kein Konto? Registrieren

                          • Anmelden oder registrieren, um zu suchen
                          • Erster Beitrag
                            Letzter Beitrag
                          0
                          • Home
                          • Aktuell
                          • Tags
                          • Ungelesen 0
                          • Kategorien
                          • Unreplied
                          • Beliebt
                          • GitHub
                          • Docu
                          • Hilfe