NEWS
Upgrade von Debian 11/Bullseye auf 12/Bookworm
Off Topic
351
Beiträge
51
Kommentatoren
89.3k
Aufrufe
52
Watching
-
@josh sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Ist eigentlich mittlerweile Bookworm auf RaspiOS raus?
Nein, noch nichts offizielles.
Ich weiß wohl nicht, was mit dem Bookwormupdate mitgeliefert wurde.
nodejs installiert man am bestem immer in der nodesource-Version.
@thomas-braun Moin Allerseits,
ich häng mich mal an den Thread ran:
Nach dem erfolgreichen Upgrade auf bookworm am 21.07.23 hatte ich heute wieder einmal routinemäßig ein OS-Update angestoßen. Nun schien da irgendwas schief gelaufen zu sein. Hat das damit zu tun, dass bookworm noch nicht vollständig für pi bereitsteht?
pi@raspberrypi:~ $ sudo apt-get update && sudo apt-get upgrade -y Ign:1 http://raspbian.raspberrypi.org/raspbian booworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://archive.raspberrypi.org/debian bookworm InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Err:6 http://raspbian.raspberrypi.org/raspbian booworm Release 404 Not Found [IP: 93.93.128.193 80] Hit:7 https://deb.nodesource.com/node_18.x bookworm InRelease Reading package lists... Done E: The repository 'http://raspbian.raspberrypi.org/raspbian booworm Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. W: http://security.debian.org/debian-security/dists/bookworm-security/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://archive.raspberrypi.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm-updates/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. pi@raspberrypi:~ $Oder liegt der Fehler bei mir?
Danke für Aufklärung, schönes WE.Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun Moin Allerseits,
ich häng mich mal an den Thread ran:
Nach dem erfolgreichen Upgrade auf bookworm am 21.07.23 hatte ich heute wieder einmal routinemäßig ein OS-Update angestoßen. Nun schien da irgendwas schief gelaufen zu sein. Hat das damit zu tun, dass bookworm noch nicht vollständig für pi bereitsteht?
pi@raspberrypi:~ $ sudo apt-get update && sudo apt-get upgrade -y Ign:1 http://raspbian.raspberrypi.org/raspbian booworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://archive.raspberrypi.org/debian bookworm InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Err:6 http://raspbian.raspberrypi.org/raspbian booworm Release 404 Not Found [IP: 93.93.128.193 80] Hit:7 https://deb.nodesource.com/node_18.x bookworm InRelease Reading package lists... Done E: The repository 'http://raspbian.raspberrypi.org/raspbian booworm Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. W: http://security.debian.org/debian-security/dists/bookworm-security/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://archive.raspberrypi.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm-updates/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. pi@raspberrypi:~ $Oder liegt der Fehler bei mir?
Danke für Aufklärung, schönes WE.@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
raspbian booworm Release
da fehlt ein k
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
@thomas-braun Moin Allerseits,
ich häng mich mal an den Thread ran:
Nach dem erfolgreichen Upgrade auf bookworm am 21.07.23 hatte ich heute wieder einmal routinemäßig ein OS-Update angestoßen. Nun schien da irgendwas schief gelaufen zu sein. Hat das damit zu tun, dass bookworm noch nicht vollständig für pi bereitsteht?
pi@raspberrypi:~ $ sudo apt-get update && sudo apt-get upgrade -y Ign:1 http://raspbian.raspberrypi.org/raspbian booworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://archive.raspberrypi.org/debian bookworm InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Err:6 http://raspbian.raspberrypi.org/raspbian booworm Release 404 Not Found [IP: 93.93.128.193 80] Hit:7 https://deb.nodesource.com/node_18.x bookworm InRelease Reading package lists... Done E: The repository 'http://raspbian.raspberrypi.org/raspbian booworm Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. W: http://security.debian.org/debian-security/dists/bookworm-security/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://archive.raspberrypi.org/debian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. W: http://deb.debian.org/debian/dists/bookworm-updates/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. pi@raspberrypi:~ $Oder liegt der Fehler bei mir?
Danke für Aufklärung, schönes WE.@pi-ter
boowormDa fehlt ein
k...Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
Und schieb die keys woanders hin:
sudo cp /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d/ -
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
raspbian booworm Release
da fehlt ein k
@djmarc75 sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
raspbian booworm Release
da fehlt ein k
Ja, sehe ich jetzt auch. Danke.
Merkwürdig: In meiner "Kopiervorlage" für die sources.list gibt es diesen Tipper nicht.
Egal, aber hätte es nicht dann auch schon beim Upgrade Probleme geben müssen?Wie dem auch sei... Update läuft jetzt erst einmal. Und wie es bislang aussieht wohl ohne Fehler. Schaun wir mal...
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@pi-ter
boowormDa fehlt ein
k...Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
Und schieb die keys woanders hin:
sudo cp /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d/@thomas-braun
Ah ok ..., 31.08.23 - na da bin ich ja dann noch zeitnah dran.
Da das Update noch läuft, werde ich es danach gleich mal angehen.
Danke für den Hinweis.
Schönes WE -
@djmarc75 sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
raspbian booworm Release
da fehlt ein k
Ja, sehe ich jetzt auch. Danke.
Merkwürdig: In meiner "Kopiervorlage" für die sources.list gibt es diesen Tipper nicht.
Egal, aber hätte es nicht dann auch schon beim Upgrade Probleme geben müssen?Wie dem auch sei... Update läuft jetzt erst einmal. Und wie es bislang aussieht wohl ohne Fehler. Schaun wir mal...
@pi-ter
Warum nimmst du nicht diese Befehle?
Da ist kein Tippfehler drin:sudo sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list sudo sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list.d/* -
@pi-ter
Warum nimmst du nicht diese Befehle?
Da ist kein Tippfehler drin:sudo sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list sudo sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list.d/*@thomas-braun
Hm.. die stehen auch in meiner "Kopiervorlage" und ich denke, dass ich die auch verwendet habe. Eigentlich habe ich die Anleitung punktuell abgearbeitet.
Vlt. ist da schon was quer gelaufen. Weiß ich nun nicht mehr. Letztlich hatte im Juli das erfolgreiche Upgrade gezählt.Andere Frage zu dieser Änderung per 31. August:
Habe ich diese Info im abonnierten feed übersehen oder war das eher Insiderwissen?Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@pi-ter
boowormDa fehlt ein
k...Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
Und schieb die keys woanders hin:
sudo cp /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d/@thomas-braun sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
@pi-ter
Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
pi@raspberrypi:~ $ sudo rm `sudo find / -name nodesource.gpg` pi@raspberrypi:~ $ sudo rm `sudo find / -name nodesource.key` rm: missing operand Try 'rm --help' for more information. pi@raspberrypi:~ $Blöd gelaufen?
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun
Hm.. die stehen auch in meiner "Kopiervorlage" und ich denke, dass ich die auch verwendet habe. Eigentlich habe ich die Anleitung punktuell abgearbeitet.
Vlt. ist da schon was quer gelaufen. Weiß ich nun nicht mehr. Letztlich hatte im Juli das erfolgreiche Upgrade gezählt.Andere Frage zu dieser Änderung per 31. August:
Habe ich diese Info im abonnierten feed übersehen oder war das eher Insiderwissen?@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Habe ich diese Info im abonnierten feed
Welcher abonnierte Feed?
-
@thomas-braun sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
@pi-ter
Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
pi@raspberrypi:~ $ sudo rm `sudo find / -name nodesource.gpg` pi@raspberrypi:~ $ sudo rm `sudo find / -name nodesource.key` rm: missing operand Try 'rm --help' for more information. pi@raspberrypi:~ $Blöd gelaufen?
@pi-ter
Nein, nicht blödgelaufen, es gibt die Datei nur nicht.
Man könnte die Meldung unterdrücken, hab ich aber in dem Fall drauf verzichtet. -
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Habe ich diese Info im abonnierten feed
Welcher abonnierte Feed?
@thomas-braun sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Habe ich diese Info im abonnierten feed
Welcher abonnierte Feed?
Der zum Beispiel:
https://forum.iobroker.net/recentposts.rss:-)
-
@pi-ter
boowormDa fehlt ein
k...Das nodesource Repo muss aber auch umgestellt werden. Der letzte Stand ist im howto aus meiner Signatur zu finden.
Und schieb die keys woanders hin:
sudo cp /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d/@thomas-braun
Stunden später:- Die Aufgaben bezüglich 31.08. abgearbeitet,
- restliche Adapter aktualisiert
- OS- Update
Magst Du bitte mal schauen, ob nun alles passt oder ob es noch Handlungsbedarf gibt:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 906M 2.6G 503K 522M 3.1G Swap: 104M 0B 104M Total: 4.1G 906M 2.7G Active iob-Instances: 19 Active repo(s): Stable (default) ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 4721 States: 4005 Size of iob-Database: 11M /opt/iobroker/iobroker-data/objects.jsonl 4.2M /opt/iobroker/iobroker-data/objects.json.migrated 4.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 3.5M /opt/iobroker/iobroker-data/states.jsonl 500K /opt/iobroker/iobroker-data/states.json.migrated 500K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Danke...
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun
Stunden später:- Die Aufgaben bezüglich 31.08. abgearbeitet,
- restliche Adapter aktualisiert
- OS- Update
Magst Du bitte mal schauen, ob nun alles passt oder ob es noch Handlungsbedarf gibt:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 906M 2.6G 503K 522M 3.1G Swap: 104M 0B 104M Total: 4.1G 906M 2.7G Active iob-Instances: 19 Active repo(s): Stable (default) ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 4721 States: 4005 Size of iob-Database: 11M /opt/iobroker/iobroker-data/objects.jsonl 4.2M /opt/iobroker/iobroker-data/objects.json.migrated 4.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 3.5M /opt/iobroker/iobroker-data/states.jsonl 500K /opt/iobroker/iobroker-data/states.json.migrated 500K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Danke...
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Boot Target: graphical.target
Würde ich auf multi-user.taget bringen.
Geht in raspi-config:
1, S5, B1 -
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
Boot Target: graphical.target
Würde ich auf multi-user.taget bringen.
Geht in raspi-config:
1, S5, B1@thomas-braun
Done!======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: multi-user.targetDanke...
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun
Done!======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: multi-user.targetDanke...
@pi-ter
Gib mal die Langfassung zum Besten.
-
@pi-ter
Gib mal die Langfassung zum Besten.
@thomas-braun ,
Gern:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 1.2G 2.3G 503K 648M 2.8G Swap: 104M 0B 104M Total: 4.1G 1.2G 2.4G Active iob-Instances: 19 Active repo(s): Stable (default) ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 4721 States: 3990 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 4.2M /opt/iobroker/iobroker-data/objects.json.migrated 4.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.6M /opt/iobroker/iobroker-data/states.jsonl 500K /opt/iobroker/iobroker-data/states.json.migrated 500K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun ,
Gern:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 12 (bookworm) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 1.2G 2.3G 503K 648M 2.8G Swap: 104M 0B 104M Total: 4.1G 1.2G 2.4G Active iob-Instances: 19 Active repo(s): Stable (default) ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 4721 States: 3990 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 4.2M /opt/iobroker/iobroker-data/objects.json.migrated 4.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.6M /opt/iobroker/iobroker-data/states.jsonl 500K /opt/iobroker/iobroker-data/states.json.migrated 500K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ==================== -
@pi-ter
Gib mal die Langfassung zum Besten.
Moin,
da ich betreffs multi-user.taget gestern nur einen Schnipsel aus diag gepostet hatte, nahm ich an, dass Du die komplette Zusammenfassung wolltest.Aber bevor ich die tatsächliche Langfassung bringe, noch eine Frage:
Was triggert, ob bei neofetch die Beere oder der Bookworm als Logo ausgegeben wird. Ist zwar nicht wirklich wichtig, interessiert mich nur halt. Auf dem Raspi 3 mit pihole mit bookworm wird der Wurm angezeigt, auf dem Raspi 4 mit iobroker die Beere. Beide laufen auf 64bit...
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 08:39:38 up 15 min, 2 users, load average: 1.77, 1.53, 0.87 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=55.5'C volt=0.8688V *** Time and Time Zones *** Local time: Sun 2023-09-03 08:39:38 CEST Universal time: Sun 2023-09-03 06:39:38 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 938M 2.6G 499K 546M 3.0G Swap: 104M 0B 104M Total: 4.1G 938M 2.7G 3794 M total memory 894 M used memory 858 M active memory 339 M inactive memory 2454 M free memory 83 M buffer memory 437 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 7.2G 21G 26% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 484K 759M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot /dev/sda1 ext4 14G 1.3G 12G 10% /media/USBintern tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Sep 3 08:24:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:2D:5B:0D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=83dc1cec-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sun Sep 3 08:24:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Sep 3 08:24:30 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Sep 3 08:24:33 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [Sun Sep 3 08:24:36 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/media/USBintern /dev/sda1 ext4 rw,relatime Files in neuralgic directories: /var: 1.9G /var/ 1.2G /var/cache/apt 1.2G /var/cache 1.1G /var/cache/apt/archives 528M /var/log Archived and active journals take up 524.2M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 437M /opt/iobroker/iobroker-data/ 300M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 88M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 31M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-1nodesource1 Candidate: 18.17.1-1nodesource1 Version table: *** 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.8.0 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled system.adapter.ham.0 : ham : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hs100.0 : hs100 : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.8.0 , installed 6.8.0 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "deyeidc" : 0.0.11 , installed 0.0.11 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 4.0.2 [Updatable] Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lovelace" : 3.0.1 , installed 3.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "ws" : 2.5.3 , installed 2.5.3 Objects and States Please stand by - This may take a while Objects: 4721 States: 4005 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 14093 733/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15571 518/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12781 518/iobroker.js-con tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 16353 1341/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15517 581/sshd: /usr/sbin tcp6 0 0 :::8091 :::* LISTEN 1001 18051 1561/io.lovelace.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12863 634/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15931 969/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 15519 581/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 14173 787/io.shelly.0 udp 0 0 0.0.0.0:42766 0.0.0.0:* 108 13606 369/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12172 650/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13604 369/avahi-daemon: r udp6 0 0 :::51524 :::* 108 13607 369/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13605 369/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-03 08:40:38.898 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.name changed: FRITZ!DECT 400 #3 (ack = true) 2023-09-03 08:40:38.902 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.battery changed: 50 (ack = true) 2023-09-03 08:40:38.905 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.batterylow changed: false (ack = true) 2023-09-03 08:40:38.909 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.id changed: 5000 (ack = true) 2023-09-03 08:40:38.913 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.name changed: FRITZ!DECT 400 #3: kurz (ack = true) 2023-09-03 08:40:38.916 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.lastpressedtimestamp changed: Sat Aug 26 2023 12:51:16 GMT+0200 (Central European Summer Time) (ack = true) 2023-09-03 08:40:38.920 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.id changed: 5001 (ack = true) 2023-09-03 08:40:38.923 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.name changed: FRITZ!DECT 400 #3: lang (ack = true) 2023-09-03 08:40:38.928 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.synchronized changed: false (ack = true) 2023-09-03 08:40:38.939 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.id changed: 900 (ack = true) 2023-09-03 08:40:38.943 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.fwversion changed: 1.0 (ack = true) 2023-09-03 08:40:38.946 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.manufacturer changed: AVM (ack = true) 2023-09-03 08:40:38.949 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.present changed: true (ack = true) 2023-09-03 08:40:38.952 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.txbusy changed: false (ack = true) 2023-09-03 08:40:38.955 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.name changed: Außenbereich (ack = true) 2023-09-03 08:40:38.958 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.962 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.mode changed: auto (ack = true) 2023-09-03 08:40:38.964 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.lock changed: false (ack = true) 2023-09-03 08:40:38.967 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.devicelock changed: false (ack = true) 2023-09-03 08:40:38.970 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.974 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.voltage changed: 234.211 (ack = true) 2023-09-03 08:40:38.977 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.power changed: 0 (ack = true) 2023-09-03 08:40:38.980 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.energy changed: 38558 (ack = true) 2023-09-03 08:40:38.984 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.masterdeviceid changed: 0 (ack = true) 2023-09-03 08:40:38.987 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.members changed: 17 (ack = true)Schönen Sonntag zunächst...
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
Moin,
da ich betreffs multi-user.taget gestern nur einen Schnipsel aus diag gepostet hatte, nahm ich an, dass Du die komplette Zusammenfassung wolltest.Aber bevor ich die tatsächliche Langfassung bringe, noch eine Frage:
Was triggert, ob bei neofetch die Beere oder der Bookworm als Logo ausgegeben wird. Ist zwar nicht wirklich wichtig, interessiert mich nur halt. Auf dem Raspi 3 mit pihole mit bookworm wird der Wurm angezeigt, auf dem Raspi 4 mit iobroker die Beere. Beide laufen auf 64bit...
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 08:39:38 up 15 min, 2 users, load average: 1.77, 1.53, 0.87 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=55.5'C volt=0.8688V *** Time and Time Zones *** Local time: Sun 2023-09-03 08:39:38 CEST Universal time: Sun 2023-09-03 06:39:38 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 938M 2.6G 499K 546M 3.0G Swap: 104M 0B 104M Total: 4.1G 938M 2.7G 3794 M total memory 894 M used memory 858 M active memory 339 M inactive memory 2454 M free memory 83 M buffer memory 437 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 7.2G 21G 26% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 484K 759M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot /dev/sda1 ext4 14G 1.3G 12G 10% /media/USBintern tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Sep 3 08:24:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:2D:5B:0D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=83dc1cec-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sun Sep 3 08:24:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Sep 3 08:24:30 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Sep 3 08:24:33 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [Sun Sep 3 08:24:36 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/media/USBintern /dev/sda1 ext4 rw,relatime Files in neuralgic directories: /var: 1.9G /var/ 1.2G /var/cache/apt 1.2G /var/cache 1.1G /var/cache/apt/archives 528M /var/log Archived and active journals take up 524.2M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 437M /opt/iobroker/iobroker-data/ 300M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 88M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 31M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-1nodesource1 Candidate: 18.17.1-1nodesource1 Version table: *** 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.8.0 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled system.adapter.ham.0 : ham : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hs100.0 : hs100 : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.8.0 , installed 6.8.0 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "deyeidc" : 0.0.11 , installed 0.0.11 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 4.0.2 [Updatable] Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lovelace" : 3.0.1 , installed 3.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "ws" : 2.5.3 , installed 2.5.3 Objects and States Please stand by - This may take a while Objects: 4721 States: 4005 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 14093 733/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15571 518/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12781 518/iobroker.js-con tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 16353 1341/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15517 581/sshd: /usr/sbin tcp6 0 0 :::8091 :::* LISTEN 1001 18051 1561/io.lovelace.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12863 634/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15931 969/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 15519 581/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 14173 787/io.shelly.0 udp 0 0 0.0.0.0:42766 0.0.0.0:* 108 13606 369/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12172 650/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13604 369/avahi-daemon: r udp6 0 0 :::51524 :::* 108 13607 369/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13605 369/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-03 08:40:38.898 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.name changed: FRITZ!DECT 400 #3 (ack = true) 2023-09-03 08:40:38.902 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.battery changed: 50 (ack = true) 2023-09-03 08:40:38.905 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.batterylow changed: false (ack = true) 2023-09-03 08:40:38.909 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.id changed: 5000 (ack = true) 2023-09-03 08:40:38.913 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.name changed: FRITZ!DECT 400 #3: kurz (ack = true) 2023-09-03 08:40:38.916 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.lastpressedtimestamp changed: Sat Aug 26 2023 12:51:16 GMT+0200 (Central European Summer Time) (ack = true) 2023-09-03 08:40:38.920 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.id changed: 5001 (ack = true) 2023-09-03 08:40:38.923 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.name changed: FRITZ!DECT 400 #3: lang (ack = true) 2023-09-03 08:40:38.928 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.synchronized changed: false (ack = true) 2023-09-03 08:40:38.939 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.id changed: 900 (ack = true) 2023-09-03 08:40:38.943 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.fwversion changed: 1.0 (ack = true) 2023-09-03 08:40:38.946 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.manufacturer changed: AVM (ack = true) 2023-09-03 08:40:38.949 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.present changed: true (ack = true) 2023-09-03 08:40:38.952 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.txbusy changed: false (ack = true) 2023-09-03 08:40:38.955 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.name changed: Außenbereich (ack = true) 2023-09-03 08:40:38.958 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.962 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.mode changed: auto (ack = true) 2023-09-03 08:40:38.964 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.lock changed: false (ack = true) 2023-09-03 08:40:38.967 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.devicelock changed: false (ack = true) 2023-09-03 08:40:38.970 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.974 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.voltage changed: 234.211 (ack = true) 2023-09-03 08:40:38.977 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.power changed: 0 (ack = true) 2023-09-03 08:40:38.980 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.energy changed: 38558 (ack = true) 2023-09-03 08:40:38.984 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.masterdeviceid changed: 0 (ack = true) 2023-09-03 08:40:38.987 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.members changed: 17 (ack = true)Schönen Sonntag zunächst...
@pi-ter sagte in Upgrade von Debian 11/Bullseye auf 12/Bookworm:
debug: fritzdect.0
dein loglevel steht auf debug, stell das mal zurück auf z.b. info
umgestiegen von Proxmox auf Unraid
-
Moin,
da ich betreffs multi-user.taget gestern nur einen Schnipsel aus diag gepostet hatte, nahm ich an, dass Du die komplette Zusammenfassung wolltest.Aber bevor ich die tatsächliche Langfassung bringe, noch eine Frage:
Was triggert, ob bei neofetch die Beere oder der Bookworm als Logo ausgegeben wird. Ist zwar nicht wirklich wichtig, interessiert mich nur halt. Auf dem Raspi 3 mit pihole mit bookworm wird der Wurm angezeigt, auf dem Raspi 4 mit iobroker die Beere. Beide laufen auf 64bit...
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" NAME="Raspbian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 08:39:38 up 15 min, 2 users, load average: 1.77, 1.53, 0.87 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=55.5'C volt=0.8688V *** Time and Time Zones *** Local time: Sun 2023-09-03 08:39:38 CEST Universal time: Sun 2023-09-03 06:39:38 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 938M 2.6G 499K 546M 3.0G Swap: 104M 0B 104M Total: 4.1G 938M 2.7G 3794 M total memory 894 M used memory 858 M active memory 339 M inactive memory 2454 M free memory 83 M buffer memory 437 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 7.2G 21G 26% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 484K 759M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot /dev/sda1 ext4 14G 1.3G 12G 10% /media/USBintern tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Sep 3 08:24:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:2D:5B:0D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=83dc1cec-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sun Sep 3 08:24:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Sep 3 08:24:30 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sun Sep 3 08:24:33 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [Sun Sep 3 08:24:36 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/media/USBintern /dev/sda1 ext4 rw,relatime Files in neuralgic directories: /var: 1.9G /var/ 1.2G /var/cache/apt 1.2G /var/cache 1.1G /var/cache/apt/archives 528M /var/log Archived and active journals take up 524.2M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 437M /opt/iobroker/iobroker-data/ 300M /opt/iobroker/iobroker-data/files 88M /opt/iobroker/iobroker-data/files/echarts.admin 88M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 31M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-1nodesource1 Candidate: 18.17.1-1nodesource1 Version table: *** 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.8.0 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 system.adapter.discovery.0 : discovery : raspberrypi - disabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled system.adapter.ham.0 : ham : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hs100.0 : hs100 : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin system.adapter.net-tools.0 : net-tools : raspberrypi - disabled system.adapter.ping.0 : ping : raspberrypi - disabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : raspberrypi - enabled, port: 8899 + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.8.0 , installed 6.8.0 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "deyeidc" : 0.0.11 , installed 0.0.11 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "ham" : 5.3.1 , installed 4.0.2 [Updatable] Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lovelace" : 3.0.1 , installed 3.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "ws" : 2.5.3 , installed 2.5.3 Objects and States Please stand by - This may take a while Objects: 4721 States: 4005 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 14093 733/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15571 518/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12781 518/iobroker.js-con tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 16353 1341/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15517 581/sshd: /usr/sbin tcp6 0 0 :::8091 :::* LISTEN 1001 18051 1561/io.lovelace.0 tcp6 0 0 :::8081 :::* LISTEN 1001 12863 634/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15931 969/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 15519 581/sshd: /usr/sbin udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 14173 787/io.shelly.0 udp 0 0 0.0.0.0:42766 0.0.0.0:* 108 13606 369/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12172 650/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13604 369/avahi-daemon: r udp6 0 0 :::51524 :::* 108 13607 369/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13605 369/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-03 08:40:38.898 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.name changed: FRITZ!DECT 400 #3 (ack = true) 2023-09-03 08:40:38.902 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.battery changed: 50 (ack = true) 2023-09-03 08:40:38.905 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.batterylow changed: false (ack = true) 2023-09-03 08:40:38.909 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.id changed: 5000 (ack = true) 2023-09-03 08:40:38.913 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.name changed: FRITZ!DECT 400 #3: kurz (ack = true) 2023-09-03 08:40:38.916 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-0.lastpressedtimestamp changed: Sat Aug 26 2023 12:51:16 GMT+0200 (Central European Summer Time) (ack = true) 2023-09-03 08:40:38.920 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.id changed: 5001 (ack = true) 2023-09-03 08:40:38.923 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_130960001449.button.130960001449-9.name changed: FRITZ!DECT 400 #3: lang (ack = true) 2023-09-03 08:40:38.928 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.synchronized changed: false (ack = true) 2023-09-03 08:40:38.939 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.id changed: 900 (ack = true) 2023-09-03 08:40:38.943 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.fwversion changed: 1.0 (ack = true) 2023-09-03 08:40:38.946 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.manufacturer changed: AVM (ack = true) 2023-09-03 08:40:38.949 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.present changed: true (ack = true) 2023-09-03 08:40:38.952 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.txbusy changed: false (ack = true) 2023-09-03 08:40:38.955 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.name changed: Außenbereich (ack = true) 2023-09-03 08:40:38.958 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.962 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.mode changed: auto (ack = true) 2023-09-03 08:40:38.964 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.lock changed: false (ack = true) 2023-09-03 08:40:38.967 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.devicelock changed: false (ack = true) 2023-09-03 08:40:38.970 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.state changed: false (ack = true) 2023-09-03 08:40:38.974 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.voltage changed: 234.211 (ack = true) 2023-09-03 08:40:38.977 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.power changed: 0 (ack = true) 2023-09-03 08:40:38.980 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.energy changed: 38558 (ack = true) 2023-09-03 08:40:38.984 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.masterdeviceid changed: 0 (ack = true) 2023-09-03 08:40:38.987 - debug: fritzdect.0 (1520) onStateChange => state fritzdect.0.DECT_grp6A507B-3D1EBDFC6.members changed: 17 (ack = true)Schönen Sonntag zunächst...
Support us
518
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge