esphome - wird dies noch gepflegt?

Homoran

@rushmed sagte in esphome - wird dies noch gepflegt?:

Please install packages from outside the repository using npm!

oder wechsel vorübergehend ins Beta-Repo

Thomas Braun

Gibt es nicht über das Stable-Repo.
Beta kurz scharf schalten.

esphome
github:	0.2.4
latest:	0.2.4 for 23 months
stable:	-.-.-

Rushmed

pi@Smartazamba:~ $ iob add esphome --host Smartazamba --debug
NPM version: 9.6.7
Installing iobroker.esphome@0.2.4... (System call)
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
npm ERR! command failed
npm ERR! command sh -c npip install
npm ERR! No python_modules directory; installing pip locally if needed.
npm ERR! pip 23.0.1 from /usr/lib/python3/dist-packages/pip (python 3.11)
npm ERR! error: externally-managed-environment
npm ERR!
npm ERR! × This environment is externally managed
npm ERR! ╰─> To install Python packages system-wide, try apt install
npm ERR!     python3-xyz, where xyz is the package you are trying to
npm ERR!     install.
npm ERR!
npm ERR!     If you wish to install a non-Debian-packaged Python package,
npm ERR!     create a virtual environment using python3 -m venv path/to/venv.
npm ERR!     Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
npm ERR!     sure you have python3-full installed.
npm ERR!
npm ERR!     If you wish to install a non-Debian packaged Python application,
npm ERR!     it may be easiest to use pipx install xyz, which will manage a
npm ERR!     virtual environment for you. Make sure you have pipx installed.
npm ERR!
npm ERR!     See /usr/share/doc/python3.11/README.venv for more information.
npm ERR!
npm ERR! note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
npm ERR! hint: See PEP 668 for the detailed specification.

npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-28T08_03_31_442Z-debug-0.log
host.Smartazamba Cannot install iobroker.esphome@0.2.4: 1

Den Fehler

npm ERR! × This environment is externally managed

bekomm ich auch beim Versuch der Python für das Zigbee Stick Update per SSH zu installieren.
Fehlt da noch was für Bookworm?

Rushmed

@Thomas-Braun Bin jetzt mit deinem Tipp von hier etwas weiter gekommen.

pi@Smartazamba:~ $ iob add esphome --host Smartazamba --debug
NPM version: 9.6.7
Installing iobroker.esphome@0.2.4... (System call)
npm ERR! code 127
npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
npm ERR! command failed
npm ERR! command sh -c npip install
npm ERR! sh: 1: npip: Permission denied

npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-28T08_19_07_068Z-debug-0.log
host.Smartazamba Cannot install iobroker.esphome@0.2.4: 127

Thomas Braun

@rushmed

Lösche die Datei /usr/lib/python3.x/EXTERNALLY-MANAGED
oder
verwende bei pip das Argument --break-system-packages
oder
füge in ~/.config/pip/pip.conf den Text ein:

[global]
break-system-packages = true

Thomas Braun

@rushmed

Ansonsten noch:

https://forum.iobroker.net/search?term=npm ERR! command sh -c npip install npm ERR! sh%3A 1%3A npip%3A Permission denied&in=posts&matchWords=all&sortBy=timestamp&sortDirection=desc&showAs=posts

Die Fehlermeldung ist bekannt.

Rushmed

@thomas-braun Puh, erstmal danke für die Hilfe.
EXTERNALLY-MANAGED ist aus den Verzeichnis entfernt.
Wie kann ich bei der Adapterinstalletion bei pip das Argument --break-system-packages anfügen?
/.config/pip/pip.conf finde ich im Homeverzeichnis meines ioBroker Nutzers nicht.
In dem Thread war schließlich nur die Neuinstallation die Lösung.

Nach:

cd /opt/iobroker
npm i nopy
sudo -u iobroker chmod ug+x /opt/iobroker/node_modules/nopy/src/n*

Konnte ich den Adapter installieren.

Danke!

Thomas Braun

@rushmed

Du musst nur eine der drei Optionen umsetzen.

Rushmed

@thomas-braun Ich hatte doch hier schon EXTERNALLY-MANAGED entfernt.
Damit kam ich ja zu:

pi@Smartazamba:~ $ iob add esphome --host Smartazamba --debug
NPM version: 9.6.7
Installing iobroker.esphome@0.2.4... (System call)
npm ERR! code 127
npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
npm ERR! command failed
npm ERR! command sh -c npip install
npm ERR! sh: 1: npip: Permission denied
npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-28T08_19_07_068Z-debug-0.log
host.Smartazamba Cannot install iobroker.esphome@0.2.4: 127

Davor war die Ausgabe folgende:

pi@Smartazamba:~ $ iob add esphome --host Smartazamba --debug
NPM version: 9.6.7
Installing iobroker.esphome@0.2.4... (System call)
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/iobroker.esphome
npm ERR! command failed
npm ERR! command sh -c npip install
npm ERR! No python_modules directory; installing pip locally if needed.
npm ERR! pip 23.0.1 from /usr/lib/python3/dist-packages/pip (python 3.11)
npm ERR! error: externally-managed-environment
npm ERR!
npm ERR! × This environment is externally managed
npm ERR! ╰─> To install Python packages system-wide, try apt install
npm ERR!     python3-xyz, where xyz is the package you are trying to
npm ERR!     install.
npm ERR!
npm ERR!     If you wish to install a non-Debian-packaged Python package,
npm ERR!     create a virtual environment using python3 -m venv path/to/venv.
npm ERR!     Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make
npm ERR!     sure you have python3-full installed.
npm ERR!
npm ERR!     If you wish to install a non-Debian packaged Python application,
npm ERR!     it may be easiest to use pipx install xyz, which will manage a
npm ERR!     virtual environment for you. Make sure you have pipx installed.
npm ERR!
npm ERR!     See /usr/share/doc/python3.11/README.venv for more information.
npm ERR!
npm ERR! note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages.
npm ERR! hint: See PEP 668 for the detailed specification.
npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-07-28T08_03_31_442Z-debug-0.log
host.Smartazamba Cannot install iobroker.esphome@0.2.4: 1

Thomas Braun

@rushmed

Ja, dann war das mit nopy der richtige nächste Schritt.

andreas_n

Wenn es noch wichtig ist....

Es ist eine neue Version (Zur Zeit noch Beta) herausgekommen.
Diese Version hat Module aus dem Internet geladen sodass alles wieder funktioniert. (Problem mit PlatformIO)
Besten Dank @Dutchman

Eines ist mir noch aufgefallen, was zwar die Funktion nicht beeinträchtigt aber unschön ist.
Im Log finde ich viele Einträge, dass die Verbindung zu ioBroker mehrfach aufgebaut und einzeln abgebaut werden. (Dies ist neu - wird wohl am Beta-Stand liegen . oder?)

[16:42:38][C][wifi:389]:   Signal strength: -49 dB ▂▄▆█
[16:42:38][C][wifi:393]:   Channel: 5
[16:42:38][C][wifi:394]:   Subnet: 255.255.255.0
[16:42:38][C][wifi:395]:   Gateway: 192.168.1.1
[16:42:38][C][wifi:396]:   DNS1: 192.168.1.1
[16:42:38][C][wifi:397]:   DNS2: 0.0.0.0
[16:42:38][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:38][C][logger:416]: Logger:
[16:42:38][C][logger:417]:   Level: DEBUG
[16:42:38][C][logger:418]:   Log Baud Rate: 0
[16:42:38][C][logger:420]:   Hardware UART: UART0
[16:42:38][D][api:102]: Accepted 192.168.1.95
....
[16:42:39][D][api:102]: Accepted 192.168.1.95
[16:42:39][C][mdns:115]: mDNS:
[16:42:39][C][mdns:116]:   Hostname: lifepo4-48vsolar1
[16:42:39][C][ota:097]: Over-The-Air Updates:
[16:42:39][C][ota:098]:   Address: lifepo4-48vsolar1.local:3232
[16:42:39][C][ota:101]:   Using Password.
[16:42:39][D][api:102]: Accepted 192.168.1.95
[16:42:39][C][api:139]: API Server:
[16:42:39][C][api:140]:   Address: lifepo4-48vsolar1.local:6053
[16:42:39][C][api:142]:   Using noise encryption: YES
[16:42:39][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:39][W][component:214]: Component api took a long time for an operation (0.05 s).
[16:42:39][W][component:215]: Components should block for at most 20-30ms.
[16:42:39][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][D][api:102]: Accepted 192.168.1.95
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:40][D][api:102]: Accepted 192.168.1.95
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:40][D][api:102]: Accepted 192.168.1.95
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:40][D][api:102]: Accepted 192.168.1.95
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:40][D][api:102]: Accepted 192.168.1.95
[16:42:40][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:40][W][component:214]: Component api took a long time for an operation (0.05 s).
[16:42:40][W][component:215]: Components should block for at most 20-30ms.
[16:42:41][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:41][D][api:102]: Accepted 192.168.1.95
[16:42:41][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed
[16:42:41][D][api.connection:1050]: ESPHome Logs 2023.10.6 (192.168.1.95): Connected successfully
[16:42:41][D][api:102]: Accepted 192.168.1.95
[16:42:41][W][api.connection:103]: ESPHome Logs 2023.10.6 (192.168.1.95): Connection closed

WolfgangFB

@andreas_n

Ich haabe hier die 0.41 im Einsatz und bei der passiert das bei mir auch ständig. Komischerweise aber nur mit ESPs die ich mit der neuen Version erstellt habe. Ich habe hier ältere ESPs die seit Jahren durchlaufen, da tritt das komischerweise nicht auf.

andreas_n

@wolfgangfb
Bei mir ist es 0.5.0 Beta 8. (Läuft soweit aber ganz OK)

tobiasp

Hallo zusammen,
ich wollte ESPHome installieren.
pi@raspberrypi:~ $ iob add esphome --host raspberrypi --debug

installiert ist es, aber soblad ich das Dashboard aktiviere wirde der Adapter Rot.
Was mache ich falsch?

Thomas Braun

@tobiasp sagte in esphome - wird dies noch gepflegt?:

Was mache ich falsch?

Du zeigst kein Log davon.

tobiasp

@thomas-braun
stimmt sorry

host.raspberrypi
	2024-01-13 12:29:12.798	error	Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
esphome.0
	2024-01-13 12:29:12.393	info	terminating
esphome.0
	2024-01-13 12:29:11.711	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason
esphome.0
	2024-01-13 12:29:11.707	info	terminating
esphome.0
	2024-01-13 12:29:11.662	error	Exception-Code: MODULE_NOT_FOUND: Cannot find module '@mongodb-js/zstd-linux-arm-gnueabihf'Require stack:- /opt/iobroker/node_modules/@mongodb-js/zstd/index.js
esphome.0
	2024-01-13 12:29:11.661	error	Error: Cannot find module '@mongodb-js/zstd-linux-arm-gnueabihf'Require stack:- /opt/iobroker/node_modules/@mongodb-js/zstd/index.js at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Function.Module._load (node:internal/modules/cjs/loader:975:27) at Module.require (node:internal/modules/cjs/loader:1225:19) at require (node:internal/modules/helpers:177:18) at Object.<anonymous> (/opt/iobroker/node_modules/@mongodb-js/zstd/index.js:131:29) at Module._compile (node:internal/modules/cjs/loader:1356:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1414:10) at Module.load (node:internal/modules/cjs/loader:1197:32) at Function.Module._load (node:internal/modules/cjs/loader:1013:12) at ModuleWrap.<anonymous> (node:internal/modules/esm/translators:202:29)
esphome.0
	2024-01-13 12:29:11.660	error	unhandled promise rejection: Cannot find module '@mongodb-js/zstd-linux-arm-gnueabihf'Require stack:- /opt/iobroker/node_modules/@mongodb-js/zstd/index.js
esphome.0
	2024-01-13 12:29:11.657	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
esphome.0
	2024-01-13 12:29:11.267	info	[Error caught and send to Sentry, thank you collaborating!] error: Error: Cannot find module '@mongodb-js/zstd-linux-arm-gnueabihf'Require stack:- /opt/iobroker/node_modules/@mongodb-js/zstd/index.js at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1134:15) at Function.Module._load (node:internal/modules/cjs/loader:975:27) at Module.require (node:internal/modules/cjs/loader:1225:19) at require (node:internal/modules/helpers:177:18) at Object.<anonymous> (/opt/iobroker/node_modules/@mongodb-js/zstd/index.js:131:29) at Module._compile (node:internal/modules/cjs/loader:1356:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1414:10) at Module.load (node:internal/modules/cjs/loader:1197:32) at Function.Module._load (node:internal/modules/cjs/loader:1013:12) at ModuleWrap.<anonymous> (node:internal/modules/esm/translators:202:29)
esphome.0
	2024-01-13 12:29:10.907	info	Native Integration of ESPHome Dashboard enabled
esphome.0
	2024-01-13 12:29:10.417	info	starting. Version 0.5.0-beta.8 in /opt/iobroker/node_modules/iobroker.esphome, node: v18.19.0, js-controller: 5.0.17

Thomas Braun

@tobiasp

SuFu hätte das zutage gefördert:

https://forum.iobroker.net/topic/70320/esp-home-webinterface-wird-nicht-geladen/31

tobiasp

@thomas-braun
Oh muss mich verbessern habe mit npm i iobroker.esphome installiert, da der andere befehl nicht funktioniert hat

Thomas Braun

@tobiasp

Das macht man ja auch nicht mit npm...

tobiasp

@thomas-braun
wie kann ich es sonst installieren?

Community Forum

NEWS

esphome - wird dies noch gepflegt?

Support us

872

32.4k

81.5k

1.3m