Monatsrückblick Juli / August 2026 ist online!

[Thomas Braun]

@Karl-Heinz1 sagte:

/ttyUSB1

Und auf dem Ziel sieht das wie aus?

ls -lA /dev/ttyUSB1

[Karl-Heinz1]

ls -lA /dev/ttyUSB1
crw-rw----+ 1 root plugdev 188, 1 Sep 7 10:50 /dev/ttyUSB1

[Thomas Braun]

@Karl-Heinz1

getfacl /dev/ttyUSB1

Die generelle Gruppe ist aber auch nicht dialout sondern plugdev.
Der user 'evcc' müsste also in 'plugdev' rein:

sudo usermod -aG plugdev evcc

[Karl-Heinz1]

Jetzt habe ich nur noch das Problem, das evcc in dem Instanzen nicht grün wird. Da gibt es ja nicht viel einzustellen.
Die IP Adresse ist OK der Port auch. Status Knoten ist kein Haken drin

Backitup ist auch nicht mehr grün und mir fehlt der Button für manuelles sichern.

[Thomas Braun]

@Karl-Heinz1

Hast du den user 'evcc' nach der Änderung der Gruppen mal ein- und wieder ausgeloggt?
Alternativ den ganzen Host sauber neugestartet?

[Karl-Heinz1]

Ich habe sudo reboot eingeben. iobroker ist bei gestartet und EVCC auch.

Ich habe aber bei allen Skripten oben stehen "Instanz ist deaktiviert"

Die Skripte laufen nicht. Was ist da denn jetzt passiert.

Read from remote host meinbroker: Connection reset by peer
Connection to meinbroker closed.
client_loop: send disconnect: Broken pipe

[Thomas Braun]

@Karl-Heinz1 sagte:

Die Skripte laufen nicht. Was ist da denn jetzt passiert.

Keine Ahnung, Ausgabe von

iob diag

zeigen.

[Karl-Heinz1]

iob diag
[sudo] password for karl-heinz:
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission denied

Das war mir jetzt noch nicht aufgefallen, weil ich im Moment mit EVCC zu tun hatte.

[Thomas Braun]

@Karl-Heinz1

Nach der Erstinstallation ist zwingend ein

iob stop
iob fix
sudo reboot

durchzuführen. Steht auch so in der Ausgabe des Installlationsskriptes drin.

[Karl-Heinz1]

Habe ich gemacht. Aber die Skripte laufen noch nicht.
Steht immer noch bei allen "Instanz ist deaktiviert"

[Thomas Braun]

@Karl-Heinz1

Und du bist immer noch

die Ausgabe von

iob diag

schuldig.

[Karl-Heinz1]

Hatte ich auch geschickt musst du 3 Fenster höher schauen.

Hier nochmal:

iob diag
[sudo] password for karl-heinz:
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission denied

[Thomas Braun]

@Karl-Heinz1

groups

sagt zu dem karl-heinz?

[Karl-Heinz1]

karl-heinz adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker

[Thomas Braun]

@Karl-Heinz1

Bitte gewöhn dir an die Konsolen EIN- wie AUSgaben komplett zu posten, in CodeTags </> eingebettet.
Mittlerweile mal neugestartet? Die Gruppen werden erst bei einem erneuten LogIn des users eingelesen.

[Karl-Heinz1]

Ich wusste bis eben nicht wo man die CodeTags findet
Das waren die letzten Ausgaben
Die Skripte laufen noch nicht sind alle "deaktiviert"

karl-heinz@meinbroker:~ $ sudo reboot
[sudo] password for karl-heinz: 
karl-heinz@meinbroker:~ $ Read from remote host meinbroker: Connection reset by peer
Connection to meinbroker closed.
client_loop: send disconnect: Broken pipe
euronicsxxlwunstorf@Mac ~ % iobroker start
zsh: command not found: iobroker
euronicsxxlwunstorf@Mac ~ % ssh karl-heinz@meinbroker
karl-heinz@meinbroker's password: 
Linux meinbroker 6.18.39+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.18.39-1+rpt1 (2026-07-29) aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Sep  7 15:56:32 2026 from 192.168.178.153
karl-heinz@meinbroker:~ $ 

[Thomas Braun]

@Karl-Heinz1 sagte:

euronicsxxlwunstorf@Mac ~ % iobroker start
zsh: command not found: iobroker

Da turnst du auf dem Mac herum. Das kann nicht funktionieren.

iob stop
iob fix

sagt?

[Karl-Heinz1]

Nein, da habe ich nicht richtig hingeguckt und war nicht angemeldet.

karl-heinz@meinbroker:~ $ iob fix

Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N)
library: loaded
Library version=2026-04-11

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2025-09-18
    
    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/5)
==========================================================================

Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease                                                                         
Get:3 http://archive.raspberrypi.com/debian trixie InRelease [54.9 kB]                                                                                   
Get:4 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB]                                                                               
Get:5 https://dl.evcc.io/public/evcc/stable/deb/debian trixie InRelease                                                                                       
Get:6 http://deb.debian.org/debian-security trixie-security/main armhf Packages [232 kB]
Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease                                      
Get:8 http://archive.raspberrypi.com/debian trixie/main arm64 Packages [470 kB]                    
Get:9 http://deb.debian.org/debian-security trixie-security/main arm64 Packages [252 kB]            
Get:10 http://archive.raspberrypi.com/debian trixie/main armhf Packages [461 kB]                             
Get:11 https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease     
Err:11 https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease      
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
Fetched 1,537 kB in 0s (3,082 kB/s)
Reading package lists... Done
W: https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/evcc-stable.asc are ignored as the file has an unsupported filetype.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Failed to fetch https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.

==========================================================================
    Checking ioBroker user and directory permissions (2/5)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...
ACL enabled: true

==========================================================================
    Check and cleanup npm temporary directories (3/5)
==========================================================================

Done.

==========================================================================
    Database maintenance (4/5)
==========================================================================

Checking for uncompressed JSONL databases... This might take a while!

Compressing /opt/iobroker/iobroker-data/states.jsonl
Compressing /opt/iobroker/iobroker-data/objects.jsonl
Compressed 2 JSONL files. Done

==========================================================================
    Checking autostart (5/5)
==========================================================================

==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ====
Authentication is required to stop 'iobroker.service'.
Authenticating as: Raspberry Pi OS (karl-heinz)
Password: 
==== AUTHENTICATION COMPLETE ====
Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

karl-heinz@meinbroker:~ $ 

[Thomas Braun]

@Karl-Heinz1 sagte:

Das ist übrigens der Grund, warum evcc nicht läuft. Das kann so gar nicht erst installiert werden. Musst du mal in einer gescheiten Anleitung zu evcc schauen, wie das richtig gemacht wird.

W: https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/evcc-stable.asc are ignored as the file has an unsupported filetype.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Failed to fetch https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.

Funktioniert denn

iob diag

nun?
Wenn nicht:

curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

[Karl-Heinz1]

Das ist das Ergebnis von iob diag

Ob iob diag funktioniert muss du jetzt sagen. Ich mache jetzt nichts, warte ab, was ich tun soll.

========== Start marking the full check here ===========

```bash
Script v.2026-08-30

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: meinbroker
       Icon name: computer
          Kernel: Linux 6.18.39+rpt-rpi-v8
    Architecture: arm64
OS is similar to: 

Model		: Raspberry Pi 400 Rev 1.1

Docker          : false
Virtualization  : none
Unknown

Kernel          : aarch64
Userland        : 64bit

System was installed 81 days ago (on 2026-06-18).

Systemuptime and Load:
 19:57:19 up  2:22,  3 users,  load average: 0.81, 0.38, 0.36
CPU threads     : 4

*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Mon 2026-09-07 19:57:20 CEST
           Universal time: Mon 2026-09-07 17:57:20 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
karl-heinz
HOME=/home/karl-heinz
GROUPS=karl-heinz adm dialout cdrom sudo audio video plugdev games users netdev lpadmin gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:		Unknown
Display-Manager: 	* lightdm.service - Light Display Manager
Desktop:		
Session:		tty
Boot Target: 		graphical.target

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'.
Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        2.8G        367M         34M        908M        1.2G
Swap:           2.1G          0B        2.1G
Total:          6.1G        2.8G        2.5G

Active iob-Instances: 	22

         3795 M total memory
         2698 M used memory
         1917 M active memory
         1188 M inactive memory
          349 M free memory
          115 M buffer memory
          750 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 19:57:20 up  2:22,  3 users,  load average: 0.81, 0.38, 0.36
Tasks: 221 total,   1 running, 220 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.2 us,  2.2 sy,  0.0 ni, 95.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   3795.8 total,    349.7 free,   2698.4 used,    867.2 buff/cache     
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   1097.4 avail Mem 

*** FAILED SERVICES ***
  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.

*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     760M  9.3M  750M   2% /run
/dev/mmcblk0p2 ext4       29G   12G   16G  44% /
tmpfs          tmpfs     1.9G  360K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   12K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
/dev/mmcblk0p1 vfat      505M   79M  426M  16% /boot/firmware
tmpfs          tmpfs     1.9G  2.6M  1.9G   1% /tmp
tmpfs          tmpfs     380M   64K  380M   1% /run/user/1000
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service

Messages concerning filesystems in dmesg (Last 15 lines only):
[Mon Sep  7 17:35:12 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Mon Sep  7 17:35:12 2026] EXT4-fs (mmcblk0p2): mounted filesystem 8abab6b9-ef90-4fee-ae3d-91079bfae7c1 ro with ordered data mode. Quota mode: none.
[Mon Sep  7 17:35:15 2026] EXT4-fs (mmcblk0p2): re-mounted 8abab6b9-ef90-4fee-ae3d-91079bfae7c1 r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:
/var:
2.5G	/var/
220M	/var/lib
216M	/var/cache
203M	/var/cache/apt
149M	/var/lib/apt
Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
37M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
885M	/opt/iobroker/iobroker-data/
814M	/opt/iobroker/iobroker-data/files
493M	/opt/iobroker/iobroker-data/files/javascript.admin
461M	/opt/iobroker/iobroker-data/files/javascript.admin/static
460M	/opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
43M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.c9e0f545.js.map
24M	/opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
19M	/opt/iobroker/iobroker-data/objects.jsonl
19M	/opt/iobroker/iobroker-data/files/web.admin/static/js/main.6964fae2.js.map
11M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.c9e0f545.js

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_B0043WH9-if00-port0
/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_B00332GV-if00-port0

No nvbackup.json found.

*** NodeJS-Installation ***

/usr/bin/nodejs		v22.23.2
/usr/bin/node		v22.23.2
/usr/bin/npm		10.9.8
/usr/bin/npx		10.9.8

✓ Node.js installation is correct

nodejs:
  Installed: 22.23.2-1nodesource1
  Candidate: 22.23.2-1nodesource1
  Version table:
 *** 22.23.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.23.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.23.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1+deb13u2 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:
No known Vulnerabilities detected!


*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
meinbroker          meinbroker (version: 7.2.2, hostname: meinbroker    , alive, uptime: 2569)

Core adapters versions
js-controller: 	7.2.2
admin: 		7.8.23
javascript: 	8.8.2

nodejs modules from github: 	1
+-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946)


Adapter State
+ system.adapter.admin.0                  : admin                 : meinbroker                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : meinbroker                               -  enabled
+ system.adapter.chromecast.0             : chromecast            : meinbroker                               -  enabled
  system.adapter.cloud.0                  : cloud                 : meinbroker                               - disabled
+ system.adapter.discovery.0              : discovery             : meinbroker                               -  enabled
+ system.adapter.ds18b20.0                : ds18b20               : meinbroker                               -  enabled
+ system.adapter.echarts.0                : echarts               : meinbroker                               -  enabled
+ system.adapter.evcc.0                   : evcc                  : meinbroker                               -  enabled, port: 7070
  system.adapter.flot.0                   : flot                  : meinbroker                               - disabled
+ system.adapter.growatt.0                : growatt               : meinbroker                               -  enabled
+ system.adapter.history.0                : history               : meinbroker                               -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : meinbroker                               - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : meinbroker                               - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: meinbroker                               - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : meinbroker                               - disabled
+ system.adapter.iot.0                    : iot                   : meinbroker                               -  enabled
+ system.adapter.jarvis.0                 : jarvis                : meinbroker                               -  enabled
  system.adapter.javascript.0             : javascript            : meinbroker                               -  enabled
+ system.adapter.modbus.0                 : modbus                : meinbroker                               -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : meinbroker                               -  enabled
+ system.adapter.node-red.0               : node-red              : meinbroker                               -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.pushover.0               : pushover              : meinbroker                               -  enabled
+ system.adapter.shelly.0                 : shelly                : meinbroker                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : meinbroker                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartcontrol.0           : smartcontrol          : meinbroker                               -  enabled
+ system.adapter.sonoff.0                 : sonoff                : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.telegram.0               : telegram              : meinbroker                               - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.vis-2-widgets-gauges.0   : vis-2-widgets-gauges  : meinbroker                               - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : meinbroker                               - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : meinbroker                               - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : meinbroker                               - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : meinbroker                               - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : meinbroker                               - disabled
  system.adapter.vis.0                    : vis                   : meinbroker                               -  enabled
+ system.adapter.web.0                    : web                   : meinbroker                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : meinbroker                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.evcc.0                   : evcc                  : meinbroker                               -  enabled, port: 7070
+ system.adapter.mqtt.0                   : mqtt                  : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : meinbroker                               -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : meinbroker                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : meinbroker                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : meinbroker                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : meinbroker                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin


ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none


Installed ioBroker-Adapters
┌─────────┬──────────────────────────────────────────────┬───────────────────────────────┬──────────┬────────────────┐
│ (index) │ id                                           │ name                          │ version  │ upgrade policy │
├─────────┼──────────────────────────────────────────────┼───────────────────────────────┼──────────┼────────────────┤
│ 0       │ 'system.adapter.admin'                       │ 'admin'                       │ '7.8.23' │ 'none'         │
│ 1       │ 'system.adapter.backitup'                    │ 'backitup'                    │ '4.0.3'  │ 'none'         │
│ 2       │ 'system.adapter.chromecast'                  │ 'chromecast'                  │ '3.4.1'  │ 'none'         │
│ 3       │ 'system.adapter.cloud'                       │ 'cloud'                       │ '5.0.1'  │ 'none'         │
│ 4       │ 'system.adapter.discovery'                   │ 'discovery'                   │ '5.0.0'  │ 'none'         │
│ 5       │ 'system.adapter.ds18b20'                     │ 'ds18b20'                     │ '2.0.5'  │ 'none'         │
│ 6       │ 'system.adapter.echarts'                     │ 'echarts'                     │ '1.9.2'  │ 'none'         │
│ 7       │ 'system.adapter.evcc'                        │ 'evcc'                        │ '0.2.4'  │ 'none'         │
│ 8       │ 'system.adapter.flot'                        │ 'flot'                        │ '1.12.0' │ 'none'         │
│ 9       │ 'system.adapter.growatt'                     │ 'growatt'                     │ '3.3.1'  │ 'none'         │
│ 10      │ 'system.adapter.history'                     │ 'history'                     │ '3.0.1'  │ 'none'         │
│ 11      │ 'system.adapter.icons-material-png'          │ 'icons-material-png'          │ '0.1.0'  │ 'none'         │
│ 12      │ 'system.adapter.icons-mfd-svg'               │ 'icons-mfd-svg'               │ '1.2.0'  │ 'none'         │
│ 13      │ 'system.adapter.icons-open-icon-library-png' │ 'icons-open-icon-library-png' │ '0.1.3'  │ 'none'         │
│ 14      │ 'system.adapter.icons-ultimate-png'          │ 'icons-ultimate-png'          │ '1.0.1'  │ 'none'         │
│ 15      │ 'system.adapter.iot'                         │ 'iot'                         │ '3.4.2'  │ 'none'         │
│ 16      │ 'system.adapter.jarvis'                      │ 'jarvis'                      │ '3.1.8'  │ 'none'         │
│ 17      │ 'system.adapter.javascript'                  │ 'javascript'                  │ '8.8.2'  │ 'none'         │
│ 18      │ 'system.adapter.modbus'                      │ 'modbus'                      │ '6.3.2'  │ 'none'         │
│ 19      │ 'system.adapter.mqtt'                        │ 'mqtt'                        │ '6.1.1'  │ 'none'         │
│ 20      │ 'system.adapter.net-tools'                   │ 'net-tools'                   │ '1.0.11' │ 'none'         │
│ 21      │ 'system.adapter.node-red'                    │ 'node-red'                    │ '5.2.1'  │ 'none'         │
│ 22      │ 'system.adapter.pushover'                    │ 'pushover'                    │ '4.1.0'  │ 'none'         │
│ 23      │ 'system.adapter.shelly'                      │ 'shelly'                      │ '8.2.1'  │ 'none'         │
│ 24      │ 'system.adapter.simple-api'                  │ 'simple-api'                  │ '2.8.0'  │ 'none'         │
│ 25      │ 'system.adapter.smartcontrol'                │ 'smartcontrol'                │ '2.0.1'  │ 'none'         │
│ 26      │ 'system.adapter.socketio'                    │ 'socketio'                    │ '6.7.1'  │ 'none'         │
│ 27      │ 'system.adapter.sonoff'                      │ 'sonoff'                      │ '3.1.2'  │ 'none'         │
│ 28      │ 'system.adapter.telegram'                    │ 'telegram'                    │ '3.9.0'  │ 'none'         │
│ 29      │ 'system.adapter.vis'                         │ 'vis'                         │ '1.5.6'  │ 'none'         │
│ 30      │ 'system.adapter.vis-2-widgets-gauges'        │ 'vis-2-widgets-gauges'        │ '1.1.0'  │ 'none'         │
│ 31      │ 'system.adapter.vis-colorpicker'             │ 'vis-colorpicker'             │ '2.0.3'  │ 'none'         │
│ 32      │ 'system.adapter.vis-justgage'                │ 'vis-justgage'                │ '2.1.7'  │ 'none'         │
│ 33      │ 'system.adapter.vis-material-advanced'       │ 'vis-material-advanced'       │ '1.7.4'  │ 'none'         │
│ 34      │ 'system.adapter.vis-materialdesign'          │ 'vis-materialdesign'          │ '0.5.9'  │ 'none'         │
│ 35      │ 'system.adapter.vis-rgraph'                  │ 'vis-rgraph'                  │ '0.0.2'  │ 'none'         │
│ 36      │ 'system.adapter.web'                         │ 'web'                         │ '6.3.1'  │ 'none'         │
│ 37      │ 'system.adapter.ws'                          │ 'ws'                          │ '2.6.2'  │ 'none'         │
└─────────┴──────────────────────────────────────────────┴───────────────────────────────┴──────────┴────────────────┘


ioBroker-Adapter Versions and update status
Used repository: stable
Adapter    "admin"        : 8.0.11   , installed 7.8.23 [Updatable]
Adapter    "backitup"     : 4.0.3    , installed 4.0.3
Adapter    "chromecast"   : 4.2.0    , installed 3.4.1  [Updatable]
Adapter    "cloud"        : 6.0.1    , installed 5.0.1  [Updatable]
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "ds18b20"      : 3.1.1    , installed 2.0.5  [Updatable]
Adapter    "echarts"      : 3.1.0    , installed 1.9.2  [Updatable]
Adapter    "evcc"         : 0.2.4    , installed 0.2.4
Adapter    "growatt"      : 3.3.1    , installed 3.3.1
Adapter    "history"      : 4.0.0    , installed 3.0.1  [Updatable]
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.3
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "iot"          : 6.0.3    , installed 3.4.2  [Updatable]
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 10.1.3   , installed 8.8.2  [Updatable]
Controller "js-controller": 7.2.2    , installed 7.2.2
Adapter    "modbus"       : 8.0.3    , installed 6.3.2  [Updatable]
Adapter    "mqtt"         : 6.1.4    , installed 6.1.1  [Updatable]
Adapter    "net-tools"    : 1.2.3    , installed 1.0.11 [Updatable]
Adapter    "node-red"     : 6.0.7    , installed 5.2.1  [Updatable]
Adapter    "pushover"     : 5.0.0    , installed 4.1.0  [Updatable]
Adapter    "shelly"       : 10.6.1   , installed 8.2.1  [Updatable]
Adapter    "simple-api"   : 3.0.7    , installed 2.8.0  [Updatable]
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 7.1.3    , installed 6.7.1  [Updatable]
Adapter    "sonoff"       : 3.3.0    , installed 3.1.2  [Updatable]
Adapter    "telegram"     : 5.0.5    , installed 3.9.0  [Updatable]
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2-widgets-gauges": 2.0.2, installed 1.1.0 [Updatable]
Adapter    "vis-colorpicker": 2.1.0  , installed 2.0.3  [Updatable]
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "web"          : 8.0.0    , installed 6.3.1  [Updatable]
Adapter    "ws"           : 4.1.0    , installed 2.6.2  [Updatable]


Objects and States
Please stand by - This may take a while

Objects: 	4938
States: 	4382

*** OS-Repositories and Updates ***

W: https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/evcc-stable.asc are ignored as the file has an unsupported filetype.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Failed to fetch https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://archive.raspberrypi.com/debian trixie InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Get:5 https://dl.evcc.io/public/evcc/stable/deb/debian trixie InRelease
Get:6 https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease
Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease
Err:6 https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
Fetched 23.4 kB in 0s (71.0 kB/s)
Reading package lists...
W: https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg.d/evcc-stable.asc are ignored as the file has an unsupported filetype.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://dl.evcc.io/public/evcc/stable/deb/debian bookworm InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Failed to fetch https://dl.evcc.io/public/evcc/stable/deb/debian/dists/bookworm/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 99685CA9149A5389F6AC7B06EAD5D0E07B0EC0FD, which is needed to verify signature.
W: Some index files failed to download. They have been ignored, or old ones used instead.

Pending systemupdates: 10

*** Listening Ports ***
Netid State  Recv-Q Send-Q              Local Address:Port          Peer Address:PortProcess                                                   
udp   UNCONN 0      0                         0.0.0.0:mdns               0.0.0.0:*    users:(("io.chromecast.0",pid=4395,fd=35))               
udp   UNCONN 0      0                         0.0.0.0:mdns               0.0.0.0:*    users:(("evcc",pid=1461,fd=22))                          
udp   UNCONN 0      0                         0.0.0.0:mdns               0.0.0.0:*    users:(("evcc",pid=1461,fd=3))                           
udp   UNCONN 0      0                         0.0.0.0:mdns               0.0.0.0:*    users:(("avahi-daemon",pid=708,fd=12))                   
udp   UNCONN 0      0                         0.0.0.0:56744              0.0.0.0:*    users:(("avahi-daemon",pid=708,fd=14))                   
udp   UNCONN 0      0                         0.0.0.0:coap               0.0.0.0:*    users:(("io.shelly.1",pid=4516,fd=36))                   
udp   UNCONN 0      0                         0.0.0.0:1900               0.0.0.0:*    users:(("evcc",pid=1461,fd=26))                          
udp   UNCONN 0      0                         0.0.0.0:1900               0.0.0.0:*    users:(("evcc",pid=1461,fd=25))                          
udp   UNCONN 0      0                         0.0.0.0:1900               0.0.0.0:*    users:(("evcc",pid=1461,fd=24))                          
udp   UNCONN 0      0                         0.0.0.0:sunrpc             0.0.0.0:*    users:(("rpcbind",pid=678,fd=5),("systemd",pid=1,fd=201))
udp   UNCONN 0      0      [fe80::e65f:1ff:fea3:9269]:dhcpv6-client            *:*    users:(("NetworkManager",pid=804,fd=35))                 
udp   UNCONN 0      0                               *:mdns                     *:*    users:(("evcc",pid=1461,fd=23))                          
udp   UNCONN 0      0                               *:mdns                     *:*    users:(("evcc",pid=1461,fd=6))                           
udp   UNCONN 0      0                               *:mdns                     *:*    users:(("avahi-daemon",pid=708,fd=13))                   
udp   UNCONN 0      0                               *:56692                    *:*    users:(("avahi-daemon",pid=708,fd=15))                   
udp   UNCONN 0      0                               *:sunrpc                   *:*    users:(("rpcbind",pid=678,fd=7),("systemd",pid=1,fd=203))
tcp   LISTEN 0      511                     127.0.0.1:9000               0.0.0.0:*    users:(("iobroker.js-con",pid=4247,fd=29))               
tcp   LISTEN 0      511                     127.0.0.1:9001               0.0.0.0:*    users:(("iobroker.js-con",pid=4247,fd=23))               
tcp   LISTEN 0      4096                      0.0.0.0:sunrpc             0.0.0.0:*    users:(("rpcbind",pid=678,fd=4),("systemd",pid=1,fd=200))
tcp   LISTEN 0      128                       0.0.0.0:ssh                0.0.0.0:*    users:(("sshd",pid=1290,fd=6))                           
tcp   LISTEN 0      511                       0.0.0.0:8400               0.0.0.0:*    users:(("io.jarvis.0",pid=4646,fd=29))                   
tcp   LISTEN 0      511                       0.0.0.0:1880               0.0.0.0:*    users:(("node-red",pid=4415,fd=23))                      
tcp   LISTEN 0      511                       0.0.0.0:1882               0.0.0.0:*    users:(("io.shelly.0",pid=4504,fd=38))                   
tcp   LISTEN 0      511                       0.0.0.0:1883               0.0.0.0:*    users:(("io.sonoff.0",pid=4533,fd=40))                   
tcp   LISTEN 0      4096                            *:7070                     *:*    users:(("evcc",pid=1461,fd=12))                          
tcp   LISTEN 0      4096                            *:4712                     *:*    users:(("evcc",pid=1461,fd=10))                          
tcp   LISTEN 0      4096                            *:8887                     *:*    users:(("evcc",pid=1461,fd=9))                           
tcp   LISTEN 0      4096                         [::]:sunrpc                [::]:*    users:(("rpcbind",pid=678,fd=6),("systemd",pid=1,fd=202))
tcp   LISTEN 0      128                          [::]:ssh                   [::]:*    users:(("sshd",pid=1290,fd=7))                           
tcp   LISTEN 0      511                             *:8087                     *:*    users:(("io.simple-api.0",pid=4684,fd=34))               
tcp   LISTEN 0      511                             *:tproxy                   *:*    users:(("io.admin.0",pid=4276,fd=36))                    
tcp   LISTEN 0      511                             *:8082                     *:*    users:(("io.web.0",pid=4730,fd=35))                      


*** Log File - Last 25 Lines ***
2026-09-07 19:58:49.419  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p1","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p1","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Curr_p1"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.419  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p1
2026-09-07 19:58:49.420  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Total_Summe: {"val":18388,"ack":true,"ts":1788803929418,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1788801639298}
2026-09-07 19:58:49.463  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p2","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p2","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Curr_p2"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.463  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p2
2026-09-07 19:58:49.464  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p1: {"val":0,"ack":true,"ts":1788803929462,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243462981}
2026-09-07 19:58:49.507  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p3","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p3","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Curr_p3"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.507  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p3
2026-09-07 19:58:49.508  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p2: {"val":0,"ack":true,"ts":1788803929506,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243463081}
2026-09-07 19:58:49.551  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p1","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p1","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Volt_p1"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.551  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p1
2026-09-07 19:58:49.552  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Curr_p3: {"val":0,"ack":true,"ts":1788803929550,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243463181}
2026-09-07 19:58:49.599  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p2","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p2","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Volt_p2"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.599  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p2
2026-09-07 19:58:49.600  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p1: {"val":0,"ack":true,"ts":1788803929598,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243463273}
2026-09-07 19:58:49.643  - debug: sonoff.0 (4533) process task: {"type":"addObject","id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p3","data":{"_id":"sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p3","common":{"role":"value","read":true,"write":false,"type":"number","name":"DVES_3E7859 SENSOR.SML  Volt_p3"},"native":{},"type":"state"},"cbArg":0}
2026-09-07 19:58:49.643  - debug: sonoff.0 (4533) Set state after task: sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p3
2026-09-07 19:58:49.644  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p2: {"val":0,"ack":true,"ts":1788803929642,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243463333}
2026-09-07 19:58:49.688  - debug: sonoff.0 (4533) stateChange sonoff.0.DVES_3E7859.SENSOR.SML.Volt_p3: {"val":0,"ack":true,"ts":1788803929686,"q":0,"from":"system.adapter.sonoff.0","user":"system.user.admin","lc":1721243463393}
2026-09-07 19:58:50.061  - info: shelly.0 (4504) [authEnabled] 192.168.178.40 (shellyplusplugs / shellyplusplugs-b48a0a1cc8cc / shellyplusplugs#b48a0a1cc8cc#1): This device is not protected via restricted login (see adapter documentation for details)
2026-09-07 19:58:51.122  - info: shelly.0 (4504) [authEnabled] 192.168.178.57 (shellyplus1 / shellyplus1-80646fd94da8 / shellyplus1#80646fd94da8#1): This device is not protected via restricted login (see adapter documentation for details)
2026-09-07 19:58:51.459  - info: shelly.1 (4516) [authEnabled] 192.168.178.50 (shelly1 / shelly1-244CAB43CA38 / SHSW-1#244CAB43CA38#1): This device is not protected via restricted login (see adapter documentation for details)
2026-09-07 19:58:51.883  - info: shelly.0 (4504) [authEnabled] 192.168.178.43 (shellyplus1 / shellyplus1-80646fd8df60 / shellyplus1#80646fd8df60#1): This device is not protected via restricted login (see adapter documentation for details)
2026-09-07 19:58:52.072  - info: shelly.1 (4516) [authEnabled] 192.168.178.64 (shellyplug-s / shellyplug-s-3CE90ED7361F / SHPLG-S#3CE90ED7361F#1): This device is not protected via restricted login (see adapter documentation for details)
2026-09-07 19:58:55.334  - info: shelly.0 (4504) [authEnabled] 192.168.178.81 (shellyplus1 / shellyplus1-7c87ce63d85c / shellyplus1#7c87ce63d85c#1): This device is not protected via restricted login (see adapter documentation for details)

============= Mark until here for C&P =============

iob diag has finished.

karl-heinz@meinbroker:~ $